Table of Contents

1.For your Safety....3 2.Mobile Phone Profile....3 3.Preparation before Use.....4 4.General Instructions for Mobile Phone....9 5.Basic operation.... 15 6.Use Menu Functions.... 18 7.English Editor Operation..... 49 8.Use USB..... 50 9.Appendix 1.... 50 10.Appendix 2.... 52 11. Appendix 3..... 53
1.For your Safety For your safety and for proper use of the mobile phone, please read the following guidelines carefully: Do not switch the mobile phone on when close to chemicals, gas stations or other explosive materials. During driving, please use the headset for safety purpose; otherwise in cases of emergency, always stop the car by the roadside to have a call conversation. Because the use of the mobile phone can cause interference in the aircraft, never use the mobile phone in aircraft. The use of the mobile phone is dangerous and illegal; do switch off the mobile phone before boarding. Pay special attention to the use of the mobile phone near heart pacemakers, deaf-aids and other medical equipments, because the mobile phone can cause interference with them. Use of uncertified accessories and parts will void the guaranty Do not dismantle the mobile phone without permission. In case of failure, please contact the supplier as soon as possible. Do not plug the charger into the mobile phone and charge without battery. Always power off the mobile phone when taking out the battery; otherwise the memory of the phone may be damaged. When charging the mobile phone, always keep it in the place with good ventilation, heat sink and away from flammable and explosive objects. In order to avoid demagnetization, always keep the mobile phone away from magnetic objects such as CDs, credit cards etc. Ensure that the mobile phone does not come in contact with any liquid; if it does occur, remove the battery and contact the supplier immediately. Do not use the mobile phone in the environments with extreme temperatures, never expose the mobile
phone to strong sunlight or a wet environment. The suitable temperature for the phone and accessories is 0-40. The height to use the phone shall be less than 2,000m. Do not use liquid or wet cloth with strong cleanser to clean the mobile phone. This mobile phone has Bluetooth, Image viewer, Audio player, FM radio, Schedule FM record and Melody composer functions, which shall be used as per the related laws and regulations. Always keep the mobile phone out of childrens reach. Do not throw or vibrate the mobile phone because violent treatment to the mobile phone may damage the inner circuits and precise structures. Please do not discard the waste battery into general household garbage. Please deal with the waste battery according to provisions where they are definitely made. Warning: We will not be bear any responsibility for any incompliance with the above guidelines or improper use of the mobile phone. Our company keeps the right to make modifications to any of the content here in this user guide without public announcement in advance. The content of this manual may vary from the actual content displayed in the mobile phone. In such case, the latter shall govern.

2.Mobile Phone Profile

The mobile phone has 17 keys on the keypad. In addition, it is inbuilt with one vibration motor, one charger/data common transmission port. (Below is the front of the mobile phone) Receiver Right selection key Left selection key Switch on/off/end key Send /call key

Ok key

Number key

3.Preparation before Use

Install SIM Card When registering mobile phone number, you can apply for two different phone numbers, two different mobile phone network service providers and thus obtain two SIM (Subscriber Identification Module) cards. With these two SIM cards, you can use all functions of your mobile phone. The SIM cards save the parameters needed for communications and personal data, including PIN (Personal Identification Number) code, phonebook, short message and other extra system services. SIM card

Warning: Do not distort or scratch the SIM card nor let it contact static, dust or moisture. If it is lost, please contact immediately with your network operator for help. Before SIM card installation, please switch off the mobile phone. The SIM card is installed on the back of the mobile phone.
Follow the following diagram to install the SIM card. Please insert the host SIM card into the SIM1 slot and the slave SIM card into the SIM2 slot. Note: If SIM card is inserted only into the SIM1 slot, then only the host works; likely, If SIM card is inserted only into the SIM2 slot, then only the slave works. When two SIM cards are inserted into the SIM1 slot and SIM2 slot respectively, you can choose work mode freely as you wish. Note: As the SIM card is small object, keep it out of childrens touch or prevent children gulping it! Install Memory card As the mobile phone does not have enough storage space, to use some functions, you need to install a memory card (This mobile phone use T-FLASH card.) Install T-FLASH card: Open the back cover to take off the battery, release the T-Flash card lock, insert the T-Flash card into its slot, restore the lock and then put back the battery restarting the mobile phone. The LCD will give the note that the T-flash card has been detected. Note: As the T-FLASH card is small object, keep it out of childrens touch or prevent children gulping it! Install Battery The mobile phone is suitable for original battery and accessories. When the battery is idle, it is recommended to put it into the protection box. Follow the following diagram to install the battery.

Battery

Note: Do install the battery as per the diagram so as prevent the battery contact patch being damaged. Charge Battery The new battery cannot reach the optimal efficiency unless it has undergone several continuous complete charges and discharges. When the battery is used up, charge it in time. Over-discharge can damage the battery. After the battery is charged full, cut off the connection of charger with the AC power supply and then the connection with the mobile phone. Follow the following diagram to connect the charger. Headset/Charger Interface
During charging, the battery capacity icon on the screen flickers from the right to the left. After the
battery is charged full, the icon is full of bars. Slight heat during charging is normal. Warning: When a travel charger and its accessories are used to charge the battery, please firstly check if they are original or recognized by the original manufacturer. The use of other accessories may damage your mobile phone and cause risks! Always use them indoor and in dry places. Notices on using the battery The performance of the battery is affected by many factors, including radio barrier network settings, signal strength, work temperature, chosen and used functions or settings as well as phone accessories, tone, data or other applications. For optimal performances, please follow the rules below: New battery or the battery having been idle for long need charging for long. The standard voltage scope for the battery is 3.6V-4.2V. During charging, keep the battery at room temperature or similar temperature. With time passing by, the battery will gradually be worn and thus need longer time to charge. This is normal. However, after normal charging, if call duration decreases but charging time increases, you need to buy another battery from the original manufacturer or authorized by the original manufacturer. The battery of interior quality can damage your mobile phone and cause danger! If the phone is overused at low battery when charging, there might need a longer time for the charge indicator to be shown on the screen. Note: Please dispose the battery according to the local regulations. Try to recycle the battery as possible. Do not treat the waste battery as common waste. Warning: Do not throw the battery into fire so as to prevent fire. The broken battery may cause explosion. Warning

Charging the mobile phone by improper means can cause to explosion. Always refer to the related regulations for the disposal of the battery.
PIN Code PIN1 Code:It is the personal identification number used to enter SIM1 and able to prevent others using SIM1 without permission. If the mobile phone has activated the PIN1 code protection, when the mobile phone is switched on, the screen will display Input SIM1 PIN. In the process of inputting PIN1 code, the screen will use * to represent the input content. While obtaining SIM1, you can obtain its PIN1 code. PIN2 Code: It is the personal identification number used to enter SIM2 and able to prevent others using SIM2 without permission. If the mobile phone has activated the PIN2 code protection, when the mobile phone is switched on, the screen will display Input SIM2 PIN. In the process of inputting PIN2 code, the screen will use * to represent the input content. While obtaining SIM2, you can obtain its PIN2 code. PUK Code and PUK2 Code(8-digit) To change the locked PIN1 code, you need to use PUK1 (Personal Unblocking Key) code. To change the locked PIN2 code, you need to use PUK2 code. If these two codes are not provided together with the SIM cards, ask the local service provider for them. Warning: If the PIN code is input wrongly for successively three times, the SIM card will be locked. Please contact the network operator immediately for help. Attempting to unlock the code may make the SIM card ineffective forever!
4.General Instructions for Mobile Phone
SIM 1 Dial key It is used to have SIM1 call (when the phone number is input or in phonebook state) and receive SIM1 incoming call. In standby state, press this key to display the latest calls (all received calls, missed calls, and dialed calls, at most 60 phone numbers). In standby state, press this key twice successively to dial out the latest call number. SIM 2 Dial key It is used to have SIM2 call (when the phone number is input or in phonebook state) and receive SIM2 incoming call. The function is same as the SIM 1 dial key. Switch-on/off key /End key In call state, it is used to interrupt a call; in call conversation state, it is used to end a call or exit from the current menu and back to the standby state. Hold this key for 4~5s to switch on/off the mobile phone. Central/Right soft key Press the central/right soft key to have the functions indicated in the bottom row of the main screen of the mobile phone. Navigation key This mobile phone has four navigation keys, with the left, right, up and down control functions. In some interfaces, they have special function, for example, in call state, audio player and video player, press the up/down key to adjust volume. In audio player, press left navigation key to play last music and right navigation key to play next one, press ok key to play or pause the music; In video player, press left navigation key to fast rewind and right navigation key to fast forward, press ok key to play or pause the video.

Slave line 1 Host line 2 Slave line 2 MMS PUSH Inbox GPRS All calls diverted Language and Input Mode The mobile phone has defaulted English and Turkish input mode. Call hint The mobile phone is inbuilt with vibration motor and buzzer and provides several incoming call modes: Ring only Vib. only Vib. then ring Vib. and ring Services Services are provided with SIM kit. The mobile phone support service function. The detailed menu items depend on SIM card and the network. When the network provides such function and your SIM card supports such function, the service menu will automatically be posted in the services of the mobile phone. Caller groups The callers group in the mobile phone includes Friends, Family, VIP, Business and Others etc. You can set different call tone and photo for different caller group.
Term Description Dial domestic calls The simplest method to dial a domestic call is to input phone number via the number keypad, then press dial key to dial call. To change phone number, press Clear key. During dialing, the screen will display a cartoon. If SIM card 1 call, "SIM1-" occurs; if SIM card 2 call, "SIM2-" occurs. When the other party is connected, the screen will display the corresponding information. Press end key to end the call. To dial a domestic call, input area code + phone number and then press the dial key. Dial international calls If you want to make an international call, you can press * key continuously until the international dialing prefix + is seen on the screen. This will allow you make an international call from any country without knowing the dialing prefix (for example, +86 represents China). After inputting the prefix, you need to input the Country number and complete telephone number. You can input the Country number according to the common practice, such as, 49 for Germany, 44 for British, 46 for Sweden, etc. Dial international telephone number as following: + Country number +Complete telephone number + Dial key. Dial fixed-line telephone extension Some fixed-line telephone extension may not directly get through, so you need to connect to the switchboard at first then put through extension number. The mobile phone can automatically dial extension number if you input P between the switchboard and extension number. Method for input P as following: hold press or continually short press three times * key (P will be shown on the display).
Dial fixed-line telephone extension as following: phone number + P + extension number + dialing key Emergency calls If your phone is under the network coverage (you can know this by checking the signal bar at the up left corner on the screen), you can make emergency calls. If your network supplier does not provide roaming service in this area, Emergency will be shown on the screen. That means you can only make this kind of calls. If your phone is under the network coverage, you can even make emergency calls without the SIM card. * In some areas, 112 (emergency call) service is provided by the network operator. In case of failure, consult the network operator. IMEI International Mobile Equipment Identity number. Switch off the mobile phone and take off the battery, then you will see the label with such number on the back of the mobile phone. Also, this number is saved in the mobile phone. After switch on, in standby state, input *#06# to display it. IP dial Firstly, in Settings/Call Setup, set correct IP access number. Enter the phonebook and choose IP Dial. Note: Regarding whether to activate IP dial when dialing local call, please consult the network operator.

5.Basic operation

Switch on Press the switch-on/off key to start the mobile phone, then the screen will display switch-on image. Then you can enter Settings menu to set phone modes, including Dual SIM open, Only SIM1 open, Only SIM2 open and Flight mode. The defaulted one is Dual SIM open. After insert SIM card, the mobile phone will automatically check the SIM card availability, and then it will be shown information as following on the display by sequence: 1. Input phone lock codeIf you have set the password. 2. Input PIN If you set SIM card password. 3. No serviceIndicates fail to make register and cannot make any calls. 4. Emergency calls onlyindicates has registered to other network and only can make call to 112. 5. Searchingthe mobile phone is searching network until find appropriate network; 6. Operator nameIndicates network successfully registered. Note: If you do not know PIN code, please contact the network service provider. The defaulted phone password 1122 Switch off To switch off the mobile phone, press the end key. When the screen displays switch-off cartoon, the host and the slave will be off at the same time. Do not take out the battery to switch off the mobile phone. If so, the SIM card can be damaged easily and some data will be lost. Dial a Call With the number keypad, you can enter phone numbers (if wrong characters are input, press the clear
key to delete them). Press the dial key to dial the phone number. In SIM1 and SIM2 On state, you can choose to dial a call via SIM1 or SIM2. To end a call, press the end key; or to cancel a dial, press the Cancel key or the switch-on/off key. After the call is connected, you can see the call timer on the screen. Dial a call via phonebook: Enter the phonebook and search the desired name/phone number, and then press dial key to dial call. Redial latest dialed number: In standby state, press dial key to view the list of the latest dialed 40 phone numbers or names. Roll to the desired phone number or name and press dial key to dial call.
Adjust Receiver Volume In call conversation, press the up navigation key or down navigation key to adjust the volume of the receiver. Answer a Call When there is a call, as per the settings of the mobile phone, you will be alerted with ring only, vibration only, vibration then ring. To receive a call, press SIM1/SIM2 Dial/Call Key. To refuse a call, press Switch-on/off key or the end key directly. If the CLI (Call Line Identity) is opened, the phone number of the caller will occur on the screen. If this number has been saved in the phonebook, the name corresponding to this number will be displayed on the screen. Send DTMF Signal When this function is set, in call conversation, press the desired number key and * key and # key to send DTMF signals to the other party. If such function is inactive, then extension call will become impossible.

mobile phone or the mobile phone cannot receive the SMS (the memory is full), the network will save the SMS temporarily. The duration of storage depends on senders settings and network service provider. With this function, the mobile phone can send and receive chain text messages, which may affect the message fees. For more information, please consult the service provider. When the SMS capacity is full, there will be an SMS icon flickering on the standby interface. The full capacity can affect SMS reception. Delete some SMS to solve the problem. If the other party has received SMS, you will hear the alert sound from the mobile phone (if such alert function is set as ON) Note: When sending SMS via the SMS network, the mobile phone may display Message sent. It indicates that the SMS has been sent to the SMS center inbox set in the mobile phone but does not mean the receiver has received the SMS. For more information, please consult the service provider. Inbox You can see the SMS in the SMS1/SIM2 inbox. Reply: You can reply to the received SMS. Delete: Delete the current SMS. Edit: You can edit the current SMS or send it after editing. Forward: You can directly forward this SMS to others. Copy to SIM: You can copy the entries in SIM card onto the phone. Move to SIM: You can move the entries in SIM card onto the phone. Chat: You can chat with the sender after set a chat room. Delete all: You can delete all SMS in inbox. Copy all: You can have two options, i.e. copy all entries on the SIM card in the inbox onto the phone or vice versa.
Move all: You can have two options, i.e. move all entries on the SIM card in the inbox onto the phone or vice versa. Use number: You can extract the number in the SMS and save it or dial a call. Use URL: You can link to the website contained in the received SMS. Outbox While sending SMS, if choosing Save and send, you can save the SMS into the Outbox. You can directly save the edited SMS into the Outbox, in such case, the Outbox will display No number, i.e. no target number. If you fail to send the SMS, it will be saved in the Outbox. Also, you can have such operations as Send from SIM1/SIM2, Edit, Delete, Copy to phone ,Move to phone, Delete all, Copy all, Move all, Use number, Use URL. Write Message You can write message in this menu. Every SMS can contain 160 word length English characters. To write SMS, press # key to switch input modes, * key to select Symbol; press Clear key to clear one character before the cursor, long press Clear key to delete all characters; press the end key to back to the standby interface, press the left and right direction key to choose characters. The mobile phone can send the chain SMS more than 160 characters (limit for common text messages). If the SMS contains more than 160 characters, then the SMS will be split into 2pcs or more. You can insert Picture, My picture, Predefined animation, My animation, Melody, My melody, Predefined sound into SMS. However, the SMS will not be received and displayed unless the network and the receiving mobile phone support. You can enter the phone number or choose a number from the phonebook to send the SMS. In dual-SIM standby mode, you can choose to send the SMS via SIM1or SIM2.

Server profile: In dual-SIM mode, you can separately set SIM1 and SIM2. After choosing Settings, you can have the following settings: Activate account. View account: You will view the Account name, MMSC address, Data account, Connection type, User name and Password of the account. Memory Status: You can see the utilization rate of the mobile phone, including the used space and the usable space. Chat You can have a chat in the chat room which you had selected or preset its information such as my nickname, destination num. Voice mail server This is a kind of network service, which cannot be used until you apply to the network operator or open it. Please consult the local service provider for more details and voice mail number. Call voice mail: You can dial the voice mail number saved in the voice mail number function list. If you have two phone numbers, they will have their own voice mail number. Edit: You can edit the voice mail name and the voice mail number. Press the OK key to save the number. Tip: In standby state, after the voice mail number is set, press 1 key to call the voice mail. In dual-SIM standby state, you can choose to call the voice inbox via SIM1 or SIM2. Broadcast Message Cell broadcast is a kind of information service such as weather report, traffic etc that the network operator sends to the GSM users within certain area. In dual-SIM mode, you can separately set SIM1 and
SIM2. Receive mode: You can ON/OFF to activate such function. Read message: You cannot read the received information until you open such function. Languages: You can set the language for the received information. The defined is All languages. Channel settings: You can Select, Add and Edit and Delete channel number. [Call history] In dual-SIM mode, you can separately search the call register of SIM1 and SIM2 Call history includes missed calls, dialed calls, received calls, Delete call logs, call timers, call cost, SMS counter and GPRS counter. In missed calls, received calls and dialed calls function list, you can see the date and time of the call, edit or delete the phone number in the list, save the number to phonebook or send SMS and MMS to the number, or redial this number etc. Note: SIM1 and SIM2 contains respectively 20 entries. Choose any entry from missed calls, received calls and dialed calls, press the Send key to dial the number directly. Call timers Last Call: With this function, you can view the last call time. Dialed calls: With function, you can view the duration of all dialed calls. Received calls: With the function, you can view the duration of all received calls. Reset al time: With this function, you can clear all duration records of calls after inputting the password 1122. Note: The actual call duration and service time in the bill of the service provider may be different from them,

2. Choose the content to be sent, and then choose Options->Send->To Bluetooth. The screen will display the device supporting Bluetooth wireless technology and within the signal coverage. To disconnect search, choose Cancel. 3. Choose the device to be connected with. 4. If another device requires matching before data transmission, the device will send hint and require inputting matching password. 5. After the connection is established, the mobile phone will display data transmission speed. 6. When other Bluetooth devices send data to my service, the mobile phone will hint and ask whether to receive the data. The received data will be stored in the initially set received folder. Tip: You can set the storage position to receive files as other folders or the folders on T-flash card. After setting, the file received via Bluetooth will be automatically saved to the specified folder. Tip: The function of using Bluetooth headset for calls is limited to only host (SIM1) call or slave (SIM2) call. If alternate SIM1 and SIM2 calls are available, this function will not be supported. Before using Bluetooth headset for calls, please go to the menu settings to confirm that the audio path has been set as hand-free device. Non-stereo Bluetooth headset cannot be used to listen to music. When stereo Bluetooth headset is used to listen to music, there will not audio output on the phone terminal. Incoming calls or dialing calls will suspend the ongoing music. Use the following methods to disconnect: Close the activated Bluetooth to disconnect all devices. Enter online devices and disconnect the specified online service.
Enter my devices and delete the matched devices to disconnect other devices with my device. The connection with the devices out of the signal coverage will be ineffective. Camera With this function, you can use the inbuilt camera to take photos. The lens of the camera is located on the back of the slide and the screen is used as the viewing window. All photos taken are in JPG form. After downloading the photos onto PC, you need some software to view them. If the storage space of the mobile phone is insufficient to store the taken photos, it is necessary to delete some old photos or other files in File Management function list to release more space. Description of Mobile Phone Options:

FM Radio: Menu description: Channel list: According to the currently tuned FM frequency, you can see the corresponding FM channel list. Manual input: You can input frequency in the scope: FM:87.5-108.0 manually. Preset auto search: According to the current channel, you can search automatically the corresponding frequency of the channel and then save the searched effective frequency into FM channel list. Setting: You can set radio and radio recording. Record: You can activate radio recording. Append: Choose one existing radio recording file to continue recording, then the newly recorded content will be added into the original recording file. File list: With it, you can display all recording files. Note: You can choose the recording as ring. In file list interface, choose one recording file and enter such submenus as: Options/Use /To User Profiles, then in User Profiles/Tone setup /Ring Settings, set
recording as ring. Alarm clock: You can choose Radio in the sound options, thus when the alarm clock time is reached, the radio will be played. Schedule Radio Recorder: Set the start time and end time etc for the recording, thus when the start time is reached, the radio recording will start automatically. You can also set the repeat as: Everyday, days, weekly, monthly, once and set the channel list then select it. Channel setting: you can select the channel from the channel list or Manual input. Record settings: functions as following: record format (AMR/WAV), Audio quality (High/Low), storage (Phone/ Memory card), Record file(New file/Append file). Melody compose: The mobile phone provides custom ring tones of different musical instruments, and add them into profiles or SMS ring base. When compose a music, you can play it with different speed and musical instruments, then save it File Manager You can manage photos, MP3 and folders. [Phone]-- The storage body is phone. [Open]: You can open Images, Photos, My Music and Video folders. ImagesImages Folder View: You can view the folder. Send: You can send images to MMS and Bluetooth etc. Details: You can see the date and size of the file.
Rename: You can rename the folder. Copy: You can copy the file into Audio, Images, My Music, Photos, Video or specified folders. Move: You can move the file into Audio, My Music, Images, Photos, Video or specified folders. Delete: You can delete the current record. Delete All files: You can delete all records in all current folders. My Music--MP3 Folder Play: You can play the current MP3. Use: You can use the current MP3 to User profiles. Send: You can send music to MMS and Bluetooth. Details: You can see the date and size of the file. Rename: You can rename the folder. Copy: You can copy the file into Audio, Images, Photos, Video or specified folders. Move: You can move the file into Audio, Images, Photos, Video or specified folders. Delete: You can delete the current record. Delete All: You can delete all records in all current folders. New folder: Under the root directory, you can create a new folder to save more detailed files. Format: Formatting can clear all files in the mobile phone and newly created folders. After formatting, you need to restart the mobile phone and the Audio folder and Images folder will restore automatically and Photos folder will automatically occur after the first photo is taken. Memory Card Open: You can open the files in the memory card. New folder: Under the root directory, you can create a new folder to save more detailed files. Format: You can format all files in the memory card.

[Fun&Games] Games This phone provides four kinds of games: Riches, Puzzle, Panda and UFO, concrete operations could see the Game Help of these games. Games settings: BGM: Set the background sound effect of the game On/Off. Sound Effect: Set the sound effect On/Off. Vibration: Set the vibration On/Off. Volume: Set the volume [User Profiles] Your mobile phone is provided with multiple profiles so that you can customize some settings in different cases for different events. Firstly, as per your personal hobby, have individualized settings on profile and then activate it. You can have such profiles as General, Meeting, Outdoor, Indoor, Headset and Bluetooth. The content can be edited at every profiles mode as following: Tone setup: Include Incoming Call, Power on, Power off, Message tone and Keypad tone. Volume: Set the volume of Ringtone and Key tone. Alert type: You can choose any one from Ring only, Vibration only, Vibration and ring ,Vibration then ring as the current ring mode. Ring type: You can choose any one from Single, Repeat, Ascending as the current ring type. Extra tone: You can have Select/Cancel settings on Warning, Error, Camp on and Connect so as to
have corresponding tone tips. Answer mode: You can choose whether to use any key to answer. After individualized settings, choose Activate in Select to start profiles. Note: After the headset is inserted into the mobile phone, the mobile phone will automatically change into headset profile. Unplug the headset to return to the previous profile. After the Bluetooth is connected with the mobile phone, the mobile phone will automatically change into headset profile and hands free profile. Disconnect the bluetooth to return to the previous profile. In standby state, press # key for several seconds to switch to silence profile and again to the previous profile. [Organizer] Calendar With this function, you can set the alarm clock to remind you of your schedule and record your schedule. Roll the rectangle block to the desired date. If the date is set with memo function, then this date will be highlighted in yellow. To view all memos of one day, press OK to see the schedule. You can have the following operations: View tasks: You can view the task of the date where the cursor is on and set the time, date, content and whether to activate alarm on this schedule. When editing the task, you can choose the alarm defaulted time with the left and right direction keys. In addition, you can have such operations as Add, Delete, Delete all and Send vCalendar. Add task: You can select task type and then edit it. The task types are as following: Reminder, Meeting, Course, Date, Call, Anniversary. Jump to date: You can move to the calendar of the specified date.

Go to weekly view: You can view the whole tasks in one week. The next time you can view the whole tasks in one month by choosing Go to monthly view.
To Do You can have such operations as View, Add, Edit, Delete, Delete all and Send vCalendar. If you have set alarm for the memo, when the set time is reached, the mobile phone will ring and display the memo content. Alarm The time format for the alarm clock is identical to that of clock. When the mobile phone is off, the alarm clock can still work provided the battery is sufficient. The system has set 5 alarm clock options and the defaulted is off. You can activate one option or all options according to the actual demand. Every alarm clock option can set independent time and date. When the time is reached, the mobile phone will give out alert tone and flicker the current time and date on the screen. Press Stop to stop alarm clock; press Sleep, then the mobile phone will pause ringing and continue after 4min. If alarm time is reached but the mobile phone is switched off, then the mobile phone will be switch on automatically and ring. If Stop is pressed, then the mobile phone will ask you whether to switch on the mobile phone. Press No to switch off the mobile phone and Yes to register at the network and switch on the mobile phone. You can edit alarm as following functions: On/Off, Time, repeat(once, everyday, days),alarm tone(tone, FM radio),snooze(default, 1-10mins),alert type(ring only, vibration only). Calculator The up navigation key for + and the down navigation key for , the left navigation key for "" and the right navigation key for ""; There are another functions as following:
M+: In put a number, then press up direction key twice to plus the content in register, finally put the result into register M-: In put a number, then press down direction key twice to subtract the content in register, finally put the result into register MR: Recall the content in the register. MC: Clear the content in the register. Press the clear key to clear the latest inputs or results digit by digit; press the clear key long to clear all content or result; Press OK key to obtain the result. Note: The precision of this calculator is limited and can be used for simple calculation. World Clock Press the left and right direction keys to view the current time of every country corresponding to every time zone. If you set up the daylight saving time for foreign city, the current time of the city except the defaulted city will be ahead a hour.
[Services] With this function, you can access multiple services on the Internet. These services include weather report, news and financial and economic information etc. This function is provided by the network supplier. According to the services the SIM card provides, there will be new menu options occurring. If the SIM card and network do not support this function, it will not be inactive. For more details, please contact the network provider. WAP

7.English Editor Operation
The mobile phone provides multiple convenient input modes, which can support the use of other functions. Basic letter input After abc /ABC/ TR/tris chosen, input your desired letters with the standard keypad. Number input This mode is mainly used to input phone numbers etc. After number is chosen, you can input digit into the place where the cursor is flickering. Symbol input In any of the above input modes, you are provided with symbol input. If you cant see symbols, press * key to see them. If you want one symbol, press the up/down/left/right key to choose.

8.Use USB

Notices before use Always connect and stop USB device correctly. Never use Windows formatting command to format the mobile disk of the mobile phone; otherwise, it will be damaged severely. USB work environment: Windows2000 / XP. For other operation systems, the connection between PC and the mobile phone cannot be conducted unless USB driver is installed.

9.Appendix 1

Troubleshooting Phenomena Unable to switch on
Possible Causes 1. Does the battery have power? 2. Is the battery placed correctly?

SIM failed

Poor signals

Unable to dial out

Unable to charge the battery
Unable to register to the network
Photos taken are too dark
1. The SIM card is dirty. Clean it. 2. Reinstall the SIM card. 3. The SIM card is damaged. Replace it. Check the signal strength icon on the screen. If the icon contains 3 bars, it indicates the signal is the strongest; if below 1 bars, it indicates the signal is very poor. 1. Maybe you have set Hide My Caller ID but your network operator does not provide this service for you. 2. Strong interference exists around you. 3. Maybe you have activated the call restriction function. 4. Maybe you have activated Line 2 but your network operator does not provide this service for you. 1. The battery may discharge too much; so it cannot be charged until it is connected for certain time. 2. Its performance has worsened. 1. Too weak signals or strong interference. 2. SIM card installed properly? Bad contact or SIM card damaged? If the SIM card is broken, please contact the network operator to replace it. 1. Check if the too low photo brightness is set. 2. Check if ambient ray is too dark.
Photos taken are too unclear Photos taken is distorted Unable to access service menus. Only part of the photo set as standby photo can be seen.
Check if the object taken is moving. Check if the mobile phone shivers slightly while you press shutter. The object taken may be too close to camera lens. Maybe the SIM card does not support service function. The size of the photo may be too big. The recommended size is 128*160.

10.Appendix 2

Abbreviations and Definitions SMS EMS SIM GSM PIN PUK Short Message Service Enhanced Message Service Subscriber Identity Module Global System for Mobile Communication Personal Identity Number PIN Unblocking Key

IMEI CB GPRS MMS Card 1 Card 2
International Mobile Equipment Identity Cell Broadcast General Packet Radio Service Multimedia Message service Host card (the card inserted in SIM1 slot) Slave card (the card inserted in SIM2 slot)

11. Appendix 3

Notices for the use of accessories Battery More than 12h charging is needed for the new battery or that idle for long. Other batteries other than the original one can damage your mobile phone and cause risk! The short in any form can lead to explosion, fire or personal injury! For your security and environment protection, do not throw the battery freely but put it into the specified recovery place. Charger Do not plug the charger into the mobile phone and charge without battery so as to prevent the phone being damaged.
Always use the charger in dry place indoor; never let the charger touch any liquid during use so as to prevent damaging the phone or even causing explosion, fire or personal injury! Always use the charger by the original manufacturer so as to prevent damaging the phone or even causing fire or personal injury etc!
USB Please insert USB in switch-off status or choose the first option Memory unit in switch-on status, then the mobile phone can be used as a memory body. Never insert the USB reversely, because doing so can make the I/O port short. Never use any other USB except that from the original manufacturer; otherwise, the mobile phone and the USB port may be damaged. T-Flash card It is recommended to use eligible T-Flash card, because the use of ineligible products may damage the T-Flash memory card slot.