Spyro-250 Effect

SY-250
Colored light whirls and twists. With audio control for convenience and DMX control for design precision, Spyro-250 TM leaves traditional effects behind.

CAUTION!

Risk of electric shock Read instructions before installing or connecting to power
Copyright 1998 Geni Electronics Co., Ltd.

Contents

TM Spyro-250 Effect Description Features Effect Diagrams Warning
Page 1 Page 1 Page 2 Page 3
Section 1 - Setting Up Inspection Lamp Installation Effect Installation Section 2 - Control Modes Audio Control for One Unit Audio Control for Four or More Units DMX512 Control TM MiniMaster16 Control Section 3 - General Use Function Dip Switch Settings Lamp Relay Maintenance Lamp Removal Trouble-shooting Product Specifications Appendix 1 Setting DMX Addresses DMX Address Chart Appendix 2 Spyro-250G

Page 3 Page 4 Page 4

Page 5 Page 5 Page 6 Page 7
Page 8 Page 9 Page 9 Page 9 Page 10 Page 11

Page 12 Page 13 Page 14

Appendix 2

Spyro-250G Gobos

1. White 2. Pink 3. Yellow 4. Light Blue 5. Green 6. Orange Red 7. Purple 8. Red 9. Dark Blue 10. Dark Purple 2 3

Description

The Spyro-250 lighting effect sets any room, whether dance hall, disco, pub or palace, to life. Vibrant specks of light twist and turn in an exciting whirl of color. With strobe, rotation, and nine dichroic colors + white, TM Spyro-250 turns any place into a party place. And with its control mode innovation, Spyro-250 leaves traditional effects behind. DMX control precision allows you to synchronize changes to music and other professional lighting equipment. Audio control provides the TM convenience of instant shows. And the MiniMaster control mode provides TM instant effect shows in sync with Geni Nimbus series scanners. Exhilarating lighting ef fect and control innovation make Spyro-250 ideal for disco, display, and mobile use.

TM TM TM

Features
Innovative color flower effect: light whirls and twists Nine dichroic colors, plus white Eight frequency-per-second (fps) strobe effect Rapid, two-way rotation Innovative control: audio and standard DMX512 control modes TM Works with MiniMaster16TM controller and Nimbus scanners Easy-to-use audio program, straightforward DMX addressing Built-in assistance functions for convenience, including focus, etc. User-friendly function switches offer control options Built to perform for a long, long time Quality components, axial fan cooling Long lamp life assured by: 1) slightly reduced operating voltage 2) automatic lamp shutoff Convenient IEC power socket Three-pin Canon XLR DMX512 signal cable connection Two DMX channels: (1) color and (2) effect rotation 1 14

DMX Address Chart

DMX starting addresses and dip switch settings for 28 Spyro-250 effect units follow. For more information about the DMX512 addressing system, please see the guide DMX512 Basics.

Spyro-250 Diagrams

Front View F1 - Bracket F2 - Bracket Knobs F3 - Hexagonal Screw for Attaching Bracket F4 - Fan Air Vents F5 - Lens F6 - Lamp Compartment Plate F7 - Screws for Attaching Lamp Compartment Plate F8 - Lamp Compartment Air Vents F1 F2 F3 F4
Address Dip Switches Unit Address Dip Switches Unit O O 29 Unit Unit 1 N N O O 31 Unit 16 Unit N N O O Unit 3 Unit 5 N N O O 7 Unit Unit 18 N N O O 9 Unit 5 Unit N N O O 11 Unit 20 Unit N N O O Unit 41 Unit 7 N N O O 43 Unit 8 Unit N N Unit 9 Unit 10 Unit 11 Unit 12 Unit 13 Unit 27
O N O N O N O N O N O N 78 9
Unit 23 Unit 24 Unit 25 Unit 26 Unit 27 Unit 28
Back View B1 - DMX Canon Connection (DMX Signal In) B2 - Built-in Microphone B3 - DMX Canon Connection (DMX Signal Out) B4 - Fuse Holder B5 - DMX Dip Switches B1 B6 - Function Dip Switches B7 - IEC Power Socket B3 B8 - Earth (Ground)

B2 B4 B5 B6 B7 B8 2

Warning!
Follow standard precautions for all electronic products.

Appendix 1

Setting DMX Addresses
This appliance must be earthed (grounded). Disconnect from power before removing covers or servicing. Keep case closed while operating. Spyro-250 TM effect contains no user serviceable parts. Servicing must be conducted by qualified service personnel. Lamp and components become hot during operation. Allow time to cool before handling. Keep flammable material a t least on e meter away fro m unit. Do not operate in wet conditions or near liquids. Keep air vents clear to avoid overheating. Never insert objects into air vents. Lamp produces hazardous UV light. Do not look directly at lamp when lit. Do not expose skin to uncovered lamp. If objects fall on unit, disconnect mains power supply immediately. Have a qualified technician inspect for safety before operating. Never remove warning or informative labels from the unit.

To set DMX addresses, you must know about (1) the relationship between DMX512 dip switches and address values, (2) your equipment, and (3) how to compute DMX addresses. The following is a brief explanation of the DMX512 system. For a m ore thorough guide, please see t he pamphlet DMX512 Basics. 1. The relationship between DMX512 dip switches and address values:

Dip Switch DMX Value 256

Note that DMX values double progressively: the first DMX dip switch has a DMX address value of 1; The second DMX dip switch ha s a value of 2; the third DMX dip switch has a value of 4, etc., as shown above.

Section 1 - Setting Up

Inspection
Every Spyro-250 effect was thoroughly tested at the factory and shipped in TM perfect condition. Carefully unpack your Spyro-250 effect and remove the bag with components from the carton. Inspect equipment for shipping damage. If shipping damage has occurred, contact your Geni dealer immediately. Packing list: 1. Spyro-250 effect 2. Mains power cord 3. Operating manual 3
2. Your equipment. Since each Spyro-250 effect has two channels, each starting addresses advances two places. In this example, we hav e no other TM DMX equipment in front of Spyro-250 , so the first effect unit's starting address should = 1; The second unit's starting address should = 3, etc. List the DMX starting values, and set DMX dip switches appropriately. (Make sure the fourth function dip switch is off.) 3. Set DMX dip switches to appropriate DMX starting addresses. Begin with the highest dip switch value possible and work down from there. For a DMX starting address of 19, for example, activate DMX dip switch #5(with a value of 16), then work down, activating dip switch #2, (with a value of 2), and dip switch #1 (with a value of 1). Use a ballpoint pen or a toothpick to flip DMX dip switches to the appropriate address settings.
TM For convenience, Spyro-250 effect starting addresses for 28 units and corresponding DMX dip switch settings are shown on the following page.

Product Specifications

Model: Spyro-250 Dimensions: 260x230x169mm (LxWxH) Weight: 7.85 kg Lamp: 24V/250W ELC GX5.3 Voltage: 120V~60Hz Power consumption: 300VA Fuse: T5A/250V 20mm Lamp transformer: 115V/22.5V PC board transformer: 115/10V/8V Signal: USITT DMX512 Signal connection: 3-pin XLR Addressing: Standard DMX512 9-pin binary Channels: 2 Termination: Built-in (Manual) Model: Spyro-250 Dimensions: 260x230x169mm (LxWxH) Weight: 7.85 kg Lamp: 24V/250W ELC GX5.3 Voltage: 230V~50Hz Power consumption: 300VA Fuse: T3.15A/250V 20mm Lamp transformer: 230V/22.5V PC board transformer: 230V/8V/10V Signal: USITT DMX512 Signal connection: 3 pin XLR Addressing: Standard DMX512 9-pin binary Channels: 2 Termination: Built-in (Manual) CE Approved Note: Spyro-250 effect is also available with gobos attached to the color TM wheel. The model with gobos is called Spyro-250G. See Appendix 2 for details. 11

Lamp Installation

Caution! Lamp and metal componLamp Installation Diagram ents get hot during operation. Always allow unit to cool before re-lamping or opening unit cover. 1. Loosen the two screws (F7) on t he lamp cover (F6). (Diagram shown on page 4.) Remove lamp compartment cover (F6). 2. Remove lamp from packaging. Read lamp instructions. Do not touch lamp bulb with bare hands, as this could shorten t he lamp life. Grasp the outside of the lamp's cup-shaped reflector. (Lamp not included with effect.) 3. Slide the lamp's cup-shaped reflector into the lamp holder (L1). L1 - Lamp Holder L2 - Lamp Socket (Diagram on right.) 4. Note that the lamp stem has two pegs. And the lamp socket (L2) has two small holes. Gent ly insert the lamp stem pegs into the holes in the lamp socket (L2). 5. Put lamp cover (F6) into place, with the flange (the metal protrusion on the lamp compartment cover) inside the un it on the lens side. Fasten both screws (F7) firmly.

Effect Installation

TM 1. For best results, hang Sypyro-250 effect from a firm tru ss. Allow at least one meter on all sides for proper cooling. 2. Bolt bracket (F1) to a 16-kg rated or stronger clamp and fasten securely to truss. Adjust projection angle and tighten bracket knobs (F2). Tighten hex screws (F3) as necessary. 3. Set Function and Dip switch settings for the control mode of y our choice. See the following for details. "Daisy chain" the units as explained in the guide DMX512 Basics. 4. Make sure that your power supply and the product power specificat ions are the same. Plug mains power cord into IEC socket (F7), then plug into an appropriate power source. 4
Section 2 - Control Modes
Audio Control for One Unit
1. Use a ballpoint pen or toothpick to flip Function dip switch #1 to t he on position: O Turn all other Function and DMX dip switches off. N 2. Provide power as explained in the Effect Installation section, and turn on the music. TM 3. Spyro-250 lighting effect will project a ligh t show that changes in sync with the music.

Trouble-shooting

The following tips are provided to help users solve basic problem s. Always refer servicing to qualified technicians.
Audio Control for Four or More Units
1. First unit: Turn on Function dip switches #1 and #2:Turn on DMX N dip switch #1. (See diagram below right.) Keep other DMX and Function dip switches off. 2. Second Unit: Turn on DMX dip switch #1 and # 2. Keep other DMX and Function dip switches off. 3. Third Unit: Turn on DMX dip switch #1 and #3. 4. Fourth Unit: Turn on DMX dip switches #1, #2, and #3. 5. Envision following units (5, 6, 7, 8, etc.) as repetitions DMX Dip Switch Settings of the first, second, third and (Audio Control, 4+ Units) fourth units. Units 5, 9, 13, etc., would have the same Unit 1, 5, 9, 13, etc. O N DMX dip switch address setO Unit 2, 6, 10, 14, etc. tings as the first unit. Units N 6,10, 14, etc., would have Unit 3, 7, 11, 15, etc. O N the same DMX dip switch O Unit 4, 8, 12, 16, etc. setting as the second unit. N See diagram at right. Activate function dip switches #1 and #2 on the first unit only. 6. Activate the DMX signal terminator, Function dip switch #6, on t he last unit in a series of units. 7. Provide power as explained in the Effects Installation section. 8. Turn on music. Spyro250 effects will change to the beat of the music in an interesting, automatic light show. 5

Problem: Lamp is not lit and fan is not operating. Solution: 1. Check mains for proper power connection and supply. 2. Disconnect power cord. Use a flat-head screwdriver to pry open the fuse holder (B4). Check the fuse. If the fuse is discolored, rather than clear, replace it. A replacement fuse is provided in the plastic box-shaped cover in the fuse holder (B4). Problem: Lamp is not lit, but fan is operating. Solution: 1. Let unit cool. Disconnect power. Check the lamp. If the lamp is discolored or broken, replace it with a new lamp of the appropriate type. 2. If lamp is not burnt or broken, re-insert it. Close the case, tighten both screws, and reconnect power. If the lamp still does not light, r efer servicing to a qualified technician. Problem: Effects do not change according to DMX512 slider positions. Solution: 1. Check DMX512 dip switch settings. Make sure unit is addressed properly. Make sure that Function dip switches are set properly. 2. Disconnect DMX512 signal cords. Turn on Function dip switch #1 , activating the one-unit audio show. Turn on some mus ic. If the audio show operates properly, the DMX signal cable or connecto r is suspect. Replace the original DMX signal cable. Problem: Function dip switches have been set for audio mode, but unit does not respond to music. Solution: 1. Make sure that the appropriate audio Function dip switche s are activated. Turn up the music volume. 2. Refer servicing to a qualified technician. 10

Lamp Relay

Innovative GENI design extends Spyro-250 lamp life. Firs t, the voltage entering the lamp is slightly low. This does not noticeably affect lamp output, but it does extend lamp life. Second, an automatic relay shuts off the lamp if it isn't used. Under DMX512 control, if the color channel is at zero for more than five seconds, the lamp shuts off. Under audio control, if no sound signal is given for more than five seconds, the lamp shuts of f. In both cases, the lamp lights when the signal is restored. Either move your color slider (in DMX control) or turn on the music (in audio control) to activate the lamp.

DMX512 Control

Each Spyro-250 effect has two channels. The first channel controls color, rotation, and strobe. The second channel controls rotation speed and direction. To use DMX512 control, you must:

Maintenance

Warning: Disconnect power and let unit cool before handling. Never open unit when in use. Keep away from water and other liquids. To maintain maximum brightness, clean the unit regularly with a damp cloth or glass cleaner. Do not use alcohol or solvents. 1. Wipe mirror and lens clean regularly. 2. Keep internal optical path free from dust or cobwebs. 3. Clean intern al parts once a year with a brush and strong vacuum cleaner once a year.

1. Set DMX512 dip switch settings and link canon signal cables to each unit as explained in the guide DMX512 Basics. DMX dip switch address settings are explained and shown in Appendix 2. 2. Connect power as explained in the Effect Installation section. Make sure that your power source and the unit power voltages are the same. TM 3. Refer to the Spyro-250 effect DMX channel control diagram below for programming positions. Channel positions on your DMX controller produce effects as indicated below. Spyro-250
TM DMX Channel Control Diagram
Channel 1 Color Strobe Rainbow Dark Purple Dark Blue Red Peach Pink Orange Green Blue Yellow Pink White Off 192 - - - - - - - - - - - - 15 0
Channel 2 Effect Rotation 255 Slow Counterclockwise Fast

Lamp Removal

Follow the directions below to remove lamps when they have burnt out. Disconnect power and let unit cool before handling. 1. Loosen two screws (F7) on the lamp compartment cover (F6). Pull compartment cover (F6) off. (Shown on page 2.) 2. Gently slide the cup-shaped lamp reflect or out of the lamp ho lder (L1). (Shown on page 4.) 3. Grasp the lamp reflector cup (L1) and lamp socket (L2). Pull the lamp reflector cup straight out, away from the lamp socket. 3. Dispose lamps properly. Keep used lamps away from children and animals.

132 131

Fast Clockwise Slow Closed 8 0-7
For example, when using a DMX512 controller on channel one, from position 64 to 79, a green-colored effect will be projected. On channel two, at position 254, the effect will rotate slowly in a counterclockwise direction.

MiniMaster16 Control

Spyro-250TM effects operate with the MiniMaster16 controller, presenting an TM instant light show either alone or accompanying Nimbus series scanners. From four to 64 units, either scanners or effects, can be used with the TM MiniMaster16TM controller. Instructions for operating Spyro-250 effects TM with the MiniMaster16 controller follow. 1. Set the fourth Function di p switch on each Spyro-250 eff ect to the on TM position: O This adjusts Spyro-250 effect channels to match N MiniMaster's program. 2. Set Spyro-250

Section 3 - General Use

Function Dip Switch Settings
The following functions are designed to enhance user convenience. Simply flip the appropriate function dip switch as shown to activate the desired function. Function Dip Switch Chart
#1 Off O N Normal DMX operation, for use with a DMX controller #1 On O N Activates audio control mode
effect DMX dip switch settings as shown below.
3. Choose one of two audio input sources, either a microphone built into TM MiniMaster16 controller, or an exterior sourc e signal from an amplifier. MiniMaster's built-in microphone is activate d when powe r is connected and no line is plugged into the Line In socket on the back panel of the controller. MiniMaster's exterior source signal is activated when a 1/4-inch (6.3mm) stereo jack is connected to the Line In socket on the controller's back panel. 4. Connect power as explained in Effect Installation and turn on the music. TM Spyro-250 effect projections will change to the music.
DMX Dip Switch Settings for Use with MiniMaster16
#2 On O N #2 Off O N Four-unit audio control mode, when One-unit audio control mode when Function dip switch #1 Function dip switch #1 is activated is activated #3 Off O N Normal DMX operation, for use with a DMX controller #4 Off O N Color effects occupy the first DMX channel; Rotation effects occupy the second DMX channel. This is standard. #5 Off O N Not presently used #6 Off O N Normal operation; This is standard. #3 On O N Activates focus assistance function; A white light appears for easy focusing. #4 On

O N 45 6

Spyro-250 Effects 1, 5, 9, 13, 17, 21, 25, 29, 33, 37, 41, 45, 49, 53, 57, 61
2, 6, 10, 14, 18, 22, 26, 30, 34, 38, 42, 46, 50, 54, 58, 62

Starting Address 9

DMX Dip Switches

O N 78 9

Color effects occupy the first DMX channel; Rotation effects occupy the third DMX channel. For use only with TM MiniMaster16 controller. #5 On
Not presently used #6 On O N DMX signal termination; Activate this on the last unit in a series of DMX equipment. This keeps the DMX signal free from interference.
3, 7, 11, 15, 19, 23, 27, 31, 35, 39, 43, 47, 51, 55, 59, 63 4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56, 60, 64

CONGRATULATIONS!

You are smart. You have one of the best, most innovative effects around.
And with the Geni mark, you are ensured of high quality and reliability for years to come. You can rely on Geni Electronics Co., Ltd., for more excellent lighting products. We design and manufacture strobes, effects, and scanners. And we work hard to keep you, our customer, satisfied. You can get some of the best quality, best priced products on the market from Geni. You know that, because you're smart. Always get the best -- with Geni. Main Office/Factory: Geni Electronics Co., Ltd. No. 12, Alley 12, Lane 732 Chung Cheng Road, Yung Kang Tainan Hsien, Taiwan Tel: 886-6-253-8513 Fax: 886-6-253-8685 Showroom: Geni Electronics Co., Ltd. Taipei World Trade Center, Room 3A-04 No. 5, Section 5, Hsin Yi Road, Taipei, Taiwan Tel: 886-2-2722-2910 Fax: 886-2-2722-2918 Thank you!

Get the best -- get Geni!
Geni Quality Sets the Standard