OBY-600 WASH User manual

CAUTION!

contents

Features Description of the appearance Inspection. Safety instructions Lamp Installation Rigging Connection with the mains Linking DMX Channel Chart Control Board Replacing the Fuse Product Specifications 12 13

Congratulations!

Thank you for purchasing OBY Series that elaborate manufactured by Geni abundant experience of stage-lights. Hereafter you can get high quality and low breakdown products on the market from Geni Electronics Co., Ltd.; OBY Series concentrated unexpectedly lighting effects for animating stages. If any question or suggestion you have, please offer the precious recommendation for improving our products and designs better; and create perspective and expectancy about future lighting.

Features

Great effect variety
! ! ! ! Delicate and streamline appearance to allow movement and installation be easier Smooth 570 rotation angle about the x-axis and 270 rotation angle about the Y-axis, electronic sensor to automatically reset CMY mixer to allow the color to be various and richer and make color adjustment more accurate by adding offset color micro-adjusting function One color disk with six dichroic color and open, which contains 3200 K CTC, be able to rotate in both directions smoothly to create hearttouching rainbow effect, in order to make color adjustment more convenient, a color macro function is added and in order to make color adjustment more accurate, an offset color micro-adjusting function is added 10-30 degree ZOOM effect Frost lens with soft-edge frost 1-12fps fast flash with random and 0-100% mechanical exposure adjustment
Sophisticated appearance and structure design
! ! ! Stylish, high impact resistant polymer shell, which is lighter than anyone else of the same class in the market. Solid square base is convenient set on the TRUSS, or directly stand on the ground or stage for uses. Systematic modular construction design has all inner function wheels and PCBs modularized, which allows version update or customization more convenient. Sophisticated optical system makes light output more bright and sharp.
Simple and easy operation
! ! ! Standard USITT DMX512 protocol, 15 or 13 DMX Channel. High-torque stepper motors, smooth and precise micro-stepping control. LED screen controls DMX coding and built-in functions' election, as well as also display lamp's time usage.
Description of the appearance

Filter

Inspection
Carefully unpack the carton, and make sure if any damage or loss caused by transportation. Contact your Geni dealer to assure your right by telephone or facsimile immediately if damage has occurred or if something is missing. Packing List: A. OBY-600 Wash B.Operating Manual C. Bracket D.Lamps (Optional )

Safety instructions

This appliance must be earthed (grounded). Disconnect power before removing covers or servicing. Keep case closed while operating. OBY-600 contains no user serviceable parts. Refer servicing to qualified technicians only. Lamp and components become hot during operation. Allow time to cool before handling. Keep flammable material at least one meter away from unit. Do not operate in wet conditions or near liquids. Keep air vents clear to avoid overheating. Lamp produces hazardous UV light. Do not look directly at lamp when lit. Replace any blown or damaged fuses only with those of identical values.

Lamp Installation

Warning Remove the power cord before installing the lamp.
Keep projector-head upward (See Figure below.) and loosen four screws on the cover with appropriate tool then open the top cover and put it aside.
Loosen and grab the screws on the shutter cover with appropriate tool.
Pull the reflector backward
Wear the gloves and extract the lamp from the package, loosen the screws on both sides of the lamp, then slide the lamp paralleled into the lamp socket. Adjust the round point of the lamp upward (See Figure.) and fasten the screws snugly. Reverse the above-mentioned processes for the complete installation.

Rigging:

Oby-600 can be set on the flat stage floor directly or use clamp to mount on any kinds of trusses for fitting the mobility of various venues.
Mount two attached brackets(a) on the bottom (See Figure ), and collocate the appropriate clamps(b) to rig with trusses. Must use the safety ropes that can hold the ten times as heavy as the fixture through the eye bolts(c) on the bottom of the base and trusses; then join the safety ropes with screw-on carabines(d).
Connection with the mains
Connect the device to the mains with the power-plug. The occupation of the connection-cables is as follows:
The earth has to be connected! In general, lighting effects should not be connected to dimming-packs.

Linking

Use 3-pin XLR data cables to link the controller to DMX lighting equipment. 3-pin XLR connectors are follows:
DMX-output XLR mounting-socket: DMX-input XLR mounting-plug:
1:Ground 2:Signal(-) 3.Signal(+)
Building a serial DMX-chain:
Connect the DMX output of the first fixture with the DMX input of the next fixture. And execute all the setups following the abovementioned instruction. Flip the DIP SWITCH #3 of last fixture to ON position for terminal confirmation.

DMX Channel chart

Dimmer
0-1-7 8-63 64-71 72-127 128-135 136-191 192-199 200-253 254-18-35 36-51 52-71 72-89 90-107 108-127 128-187 188-195 196-255 0-255

Dimmer from dark to lightest.
Close Open Shutter from slow to fast. Open Fade out fast to slow. Open Fade in slow to fast. Open Random shutter slow to fast Open White Red Blue Green Purple 5000K 3200K Forward rotate from fast to slow. Stop Reverse rotate from slow to fast.

Color wheel

From white to full cyan.

Magenta

From white to full magenta.

Yellow

From white to full yellow.

Color macro

0-7 8-15 16-23 24-31 32-39 40-47 48-55 56-63 64-71 72-79 80-87 88-95 96-103 104-111 112-119 120-127 128-135 136-143 144-151 152-159 160-167 168-175 176-183 184-191 192-199 200-207 208-215 216-223 224-231 232-239 240-247 248-255 0-63 64-127 128-143 144-255 0-255
Macro off Macro 1 Macro 2 Macro 3 Macro 4 Macro 5 Macro 6 Macro 7 Macro 8 Macro 9 Macro 10 Macro 11 Macro 12 Macro 13 Macro 14 Macro 15 Macro 16 Macro 17 Macro 18 Macro 19 Macro 20 Macro 21 Macro 22 Macro 23 Macro 24 Macro 25 Macro 26 Macro 27 Macro 28 Macro 29 Macro 30 Macro 31 Full beam. Frost filter. Flat and wide beam effect at 0. Flat and wide beam effect can 90 adjustment.

Zoom from 10 ~ 30

Pan cors.

Tilt cors.

Pan fine.
X-axis fine tuning of 2 scale.

Tilt fine. 0-7 8-63

Y-axis fine tuning of 1 scale.
Pan/Tilt adjustment in the auto movement mode adjust nearness is moving slowly Pan/Tilt adjustment in the manual mode Adjust nearness is moving rapidly. Make color wheel, cyan, magenta, yellow into offset calibration status after 3 seconds. Pan coarse Offset color wheel Tilt coarse Offset cyan Pan fine Offset magenta Tilt fine Offset yellow Save offset value after counter 3 seconds. Reset whole motors after counter 3 seconds No function. Switch On the lamp after counter 3 seconds. No function. Switch Off the lamp after counter 3 seconds. No function.

Control

64-127

128-191 192-255

Lamp switch
0-47 48-95 96-159 160-207 208-255
Function of the control channels - 8 bit protocol

Control Board

Replacing the Fuse
If the fixture does not function, that may be the fuse was burned out. It may be time to replace the fuse of same type and specification for eliminating this fault. Remove the electric power and flip the switch to " off " position before replacing the fuse. Replace the fuse as follows: Step 1: Unscrew the screw of the fuse holder on the housing counterclockwise with appropriate tools. Step 2: Remove the broken fuse and then replace the new fuse. Step 3: Reinsert and tighten the screw on the fuse-holder. Step 4: Turn the power on for test. Please contact with the dealer if the fixture still cannot work or the fuse burns out again.

Product Specifications

Physical Dimension (L x W x H): Weight: AC supply AC input:

416 x 400 x 564 mm

230V /27.5 kg, 110V /30.5 kg
Certified power cord with plug or without plug Voltage: Magnetic - 210/230/245V / 50Hz, 208/230V / 60Hz Electronic ballast - 100/120 /210/230/250V, 50/60Hz Fuse: 230V 7A, 110V 15A Power Consumption: 800W
Control and programming Signal pinout: pin 1 shield, pin 2 (-), pin 3 (+) Setting and addressing: LED control panel Protocol: USITT DMX-512 Pan/tilt resolution: 8 or 16 bit DMX channels: 13-15 Signal input: 3-pin XLR male Signal output: 3-pin XLR female Source
Lamp: 575W discharge Approved models: Philips MSI-575/HR (1000 hr; 6000K) Philips MSI-575/2 (1000 hr; 6500K) Osram HMI-575/GS (750 hr; 6000K) Control: Automatic and DMX remote on/off Ballast: Electronic & magnetic
Electromechanical effects
Cyan: Magenta: Yellow: Color wheel: 0-100% + offset adjustment 0-100% + offset adjustment 0-100% + offset adjustment 6 colors, 3200 K CTC included + open + offset adjustment Zoom: 10 -30 Frost effect: Full beam, soft-edge frost Flat & Wide: Beam shape adjustment 0 -90 Dimmer/Shutter: Infinite dimming and strobe 1~12 fps with random Pan: 0 -570 Tilt: 0 -270