Media Player 100

Standalone Media Player
The Genius Media Player 100 is a digital media player to play music, photos and videos on a TV screen from a portable hard disc, USB pen drive or memory card. It supports digital media playback in multi-formats: RM/RMVB, MPEG. 1/2, MP3, WMA, BMP, JPEG, and PNG picture slide show. Contact your sales representative for more information.

Features:

Play Music, Photos, Slideshows, and Videos on your TV display Supports CVBS (RCA) and YPbPr outputs Supports RM/RMVB, MPEG.1/2, AVI (DIVX, XVID, M-JPEG) format Supports MP3, WMA audio format Supports BMP, JPEG, and PNG picture slide show With extra e-Book function (.txt) Supports MS/SD/MMC memory card formats Supports USB port for hard disk or pen drive

Dates Available:

Delivery: Sep. 1, 2009 Retailer Chain Store MSRP: US $54.9 (54.9) Non-retail Chain Store MSRP: US $59.9 (59.9)

System requirements:

CRT TV / LCD TV/ Plasma TV with RCA or YPbPr

Specification:

Model Name Media Player 100

WEEE information:

Body weight/size: 170g Body size (LxWxH): 150 x 105 x 25 mm Gift box size (LxWxH): 24.0 x 16.0 x 4.7cm PCs/carton:20 pcs/carton CUFT: 1.96/ CTN PN: 32410019101 EAN: UPC: Product Image
Output port Input Port Video format Video resolution Bit rate Audio format Picture format Txt format
Audio/ Video output, YPbPr video MS/SD/MMC, USB storage disk RM/RMVB Real Video 8/9/10 MPE-1/2, DAT, VOB, MPEG 4 (AVI, DIVX, XVID) RM up to 1024 x 576, other formats up to 720 x 576 RM up to 1600Kb/s, other formats up to 300Kb/s -1400Kb/s Real Audio AAC, AC3, MP3, WMA, WAV (PCM / ADPCM) BMP, JPEG, PNG *.srt*.sub*.ssa/.ass*.smi format

Package contents:

Media Player 100 5V power adapter AV Cable Remote control Two AAA batteries for remote control Multi-language quick guide

Recommended products:

SP-HF500A

G-SHOT HD550T

GHP-05 Live

SW-HF5.1 5005

ENGLISH

Chapter 1: Introduction

Media Player 100 is a Digital Media Player that includes a connector for an USB storage device and Card Reader. The Media Player 100 connects to your home entertainment center allowing you to play music, show photos and videos from the storage or card reader on your stereo system or TV.

Package Contents

Media Player 100 Device Two AAA Batteries 5V power adapter Remote control AV / Audio cable Multi-language users manual

1.2 System Requirements

Display unit CRT / LCD with YPbPr or CVBS connector. No OS (operating system) or software driver installation is needed.
Chapter 2: Getting Started

2.1 Panel connectors

Check the following images for the location of the connectors on the MP-100. Rear panel connectors

R/ Audio Out

L/ Y/ Pb Pr Audio Out Video OUT
Right side storage device connectors

USB Host

Card Reader SD/MMC/SM

CONNECTOR

DC In Pr Pb Y / Video Out L / Audio Out R / Audio Out USB Host Card Reader
5mm, INT+, EXTRed RCA Jack Blue RCA Jack Green RCA Jack Red RCA White RCA USB 2.0 host 3 in 1 Card Reader 1

DESCRIPTION

AC adapter, power in (5V, 2 A) Video output Video output Video output / CVBS Video output Audio out connect to speaker or TV AV in Audio out connect to speaker or TV AV in Connect to USB HDD Support SD/MMC/SM memory card.

2.2 Device Connections

We suggest you connect your devices first before you connect the AC adapter to an outlet.
Chapter 3: Remote Control
To use Media Player 100, aim the front of the Remote Control at the Remote Control Receiver and press the control buttons as you would on any remote control.

3.1 Installing Batteries

Open the back cover of the remote control and insert two AAA batteries according to the polarity (alkaline batteries recommended).
3.2 Remote control functions
1. Power: Power on/Off control. 2. Mute: Volume mute or resume. 3. Picture: Go to Picture function. 4. Music: Go to Music function. 5. Movie: Go to Movie function 6. 16:9/4:3: Switch to different display ratio. 7. Turn: In Photo mode, photo rotated in clockwise direction. 8. Zoom In: Zoom in: 2x / 4x /8x 9. Play/Pause: Play / Pause the screen. 10. Stop: Stop the screen. 11. / : Rewind / Forward. 12. / : Previous / Next. 13. Vol +/-: Volume up / Volume down. 14. Up/Down/Right/Lift: Arrow key 15. OK: Select and Confirm button. 16. Exit: Exit or back to previous page. 17. BGM: Play/ Stop music on photo mode. 18. OSD: Control on screen display. 19. MENU: Enter Setup page. 20. Video Standard: Switch to VGA / YPbPr / AV output.

Chapter 4: Begin

4.1 How to use MENU
1. Turn on the Power, and the device will display this screen.
3. Use the remote to select the functions and click OK button to confirm the setting. Press the Menu button on the remote control to return to the previous menu setting page or OK to exit from menu setting. 2. Click on SETTINGS

4.2 System Setting

LANGUAGE: OSD menu language selection: Chinese or English. Slideshow Duration: Set Image slideshow speed. Slideshow Mode: Set Image slideshow type. Music Repeat Mode: Set Music playback time. Movie Repeat Mode: Set Video playback times. Display Mode: Switch between 4:3 or 16:9 display mode. TV system: Set TV out standard. Default: Reset the system to default setting.

4.3 Input Device Select

1. Turn on the Media Player 100.
2. Plug-in your USB storage device or insert your memory card, and the screen will show the item. 3. Select it and click OK button.

4.4 Running the Movie Player
1. Click on the Movie icon.
2. Find your Movie file and click OK button.
3. Use the remote to control the video.
4.5 Running the Music Player
1. Click on the Music icon.
2. Find your Music file and click OK button. 3. Use the remote to control the music playback.
4.6 Running the Photo Browser
1. Click on the Photo icon.
2. Find your Photo file and click OK button.
3. Click Play to start slide show.
4.7 Running the Text Reader
1. Click on the TEXT icon.
2. Find your file and click OK button. 3. The text will now be displayed.
4.8 Running the File Browser
1. Click on the File icon.
2. Find your file and click OK button.
Chapter 5: Frequently Asked Questions
Q1. How to update the device firmware? A1. 1. Download the latest firmware file from our website. 2. Unzip the firmware and copy to a USB Thumb Drive or Memory Card and plug it into the Media Player 100 device. Select the USB or SD/MMC/MS icon and then press OK on the Main Menu. 3. Select File and press OK to enter file browser. 4. Use Up/Down/Left/Right keys to select the firmware file, and then press OK to update the firmware. A dialog box will appear. Use Left/Right keys to select V, and then press OK to upgrade firmware. 5. Dont do anything when upgrading the firmware. Once it is finished, it will reboot automatically.
Q2: How do I create subtitle files in SRT, SUB, SSA/ASS, and SMI format with ANSI encoding? A2: Since the Media Player 100 only supports subtitle files in ANSI encoding format, follow these steps: Open the subtitle file with Notepad (a program in your Windows Operating System), click on the Files Menu and select the Save As option. Change the Encode option to ANSI encoding and click-on Save to proceed.