RECALL SPLIT/RESET START/STOP
DECATHLON guarantees the initial purchaser of this stopwatch that it is free from any faults linked to the material or manufacture of the charger pack for a period of two years from the date of purchase. Please retain your receipt as proof of purchase. This guarantee does not cover damage resulting from improper use, failure to respect the terms of use or accidents, neither does it cover damage resulting from improper maintenance or use of the item for business purposes. This guarantee does not cover damage resulting from repairs carried out by parties not authorized by DECATHLON. The guarantees contained here replace all other guarantees including the implicit guarantee of fair and trade quality and/or adaptation to use. DECATHLON cannot under any circumstances be held responsible for any damage, be it direct or indirect, general or specific, caused by or linked to these directions for use or the products they relate to. During the guarantee period, the item will either be repaired free of charge by an authorized repair service or replaced for free (depending on distributor). The guarantee does not cover batteries or cracked or broken watch faces where signs of a blow are evident.

Limited guarantee

Congratulations on your purchase of the TrtL 500 stopwatch! This device offers very good measuring precision as well as great ease of use and a series of high-performance functions. The TrtL 500 will accompany you for a long time during your athletic activities, when monitoring training or very simply for any measurement of time.
Characteristics and functions

Split time indicator

Main information: time, stopwatch
Split time and repeat counter
Memory indicator Slowest Fastest Countdown type indicator RECALL SLOW FAST LAP STOP TIME TIMER STW PACER

00:00:0000 00:00:000 0

Secondary information: split time Lap time indicator
: SPLIT/RESET, RECALL, START/STOP MODE , 4 buttons lines 2 displaymeasuring to 1/100 of a second up to 99 hours Precise Replaceable batteries (CR2032). Case is waterproof to water spray. May be used for water sports or in the rain. Functions Stopwatch for and 59 minutes Time (h, min, sup to 99 hourshour display) in 12 and 24 Date (day, month, year), automatic calculation of the day of the week (from 2000 to 2049) 10 intermediate times (laps) 10 functioning memories that can be consulted, calculation of the fastest LAP and the slowest LAP 2 countdown systems (TIMER) that can be set for from 1s to 99h59min59s in steps of 1 and decrementation to 1/100s s Pacer (PACER) that can be set for from 01 to 240 beeps per minute
Description of normal conditions of use
This stopwatch has been designed to measure intervals of time in order to optimize athletic training or for measuring performance. It is not intended for calibrating technical or safety devices (especially braking systems). It is no longer designed for arbitrating competition or to be used for any commercial purpose.

Stopwatch indicator

Rhythm indicator
Restrictions on use / guidelines governing use :
If you do not respect the following precautions, you risk losing the Decathlon. The stopwatch is classified as "water resistant". be used in Waterproof design :is water-resistant in rain or water spray. But it is It can thereforein cases of humid conditions and not waterproof
immersion, nor is it designed to be used under water. maintenance : To preserve the Decathlon any operation or repair be Care andentrusted to a Decathlon electronics shop. Ifguarantee, available, no dysfunctionmust be exclusively one is not can the seal for water tightness. When changing the battery, replaceinfiltrates, and check device immediately. Water may water If condensation appears or inside the casing.check the attack the electronic elements Avoid submitting the device to hard shocks like those received when falling onto a hard surface. Do not expose extreme Clean only with the stopwatch tosoft cloth,temperatures. detergents or soap, which may a and do not use the materialsslightly damp, cause to deteriorate. Keep the device away from any strong electrical field or area of static electricity. claimed in the context of the Decathlon guarantee, with the exception of hidden defects.
Scrolling through the different modes
1 Time/Date Mode 1 Time/Date Mode (Time) 2 Daily Alarm Mode 3 Stopwatch mode 4 Pacer mode (Pacer) 5 Countdown Mode (Timer) 2 Daily Alarm Mode 3 Stopwatch mode 4 Pacer mode 5 Countdown Mode
By pressing repeatedly on the MODE button, you can access the different functioning modes as shown in the following diagram. You must make the screen corresponding to the desired function appear in order to use or set it.

Operating problems: Recycling:

1 Time/Date Mode (TIME)

If you encounter a problem with the read-out please check the batteries first.
The crossed out dustbin sign means that this product and its batteries cannot be thrown out with domestic waste. They should be treated apart. When you have finished with them, drop them at an authorised collection point so they can be recycled. This gesture will go towards protecting the environment and your health.

Initial settings

AM:12:TH12.04
Initialization : In case of display problems or significant dysfunctions, press the 4 buttons simultaneously (START/STOP MODE, RECALL, SPLIT/RESET) to reset the stop, watch (RESET)
Replacing the battery is done by unscrewing the back cover a quarter turn, using a coin, for example. Inserting the battery is done according to the following diagram. Make sure the polarities are correctly placed. Remember to protect the environment and dispose of your batteries or your used product in a place where they can be recycled.
The settings for time, date, TIMER, PACER are explained in the sections dedicated to the different modes.
START/STOP : loud beep RECALL : to enter the setting mode SPLIT/RESET : to go to 12/24h mode MODE : go to the following mode Display Top line ::Time - Bottom line : Day, Week, and Date The reference "Time" will appear in this mode at the bottom left of the screen. The symbol for the daily alarm is displayed if the function is selected (see corresponding chapter). A brief display on the middle line (Time) indicates that you have entered this mode. time is displayed in Anglo-Saxon mode (0-12 or European mode The hours) on the top line. Going from one to hours AM/PM)donein by pressing the (0-24 the other is SPLIT/RESET button. On the bottom line, the date in day week-month format, day of the month (time in AngloSaxon mode). The day of the week is automatically calculated depending on the year and date selected (years 2000-2049).
Batteries : The stopwatch uses a CR2032 type battery.
and date. Settingathe timetime (2s) on the RECALL button. The word SET and the number for the Press for longer hours will flash to indicate that you have entered the setting mode.

When one of the elements flashes, press the START/STOP button to make the numbers scroll until you reach the desired value. Press RECALL again to leave the setting mode. When the alarm goes off, it sounds for 20 seconds. Press on any button to stop the sounding.
Press the SPLIT/RESET button repeatedly to change the parameter to be set, following the sequence Hour-minutes-seconds-year-month-day.
When one of the elements flashes, press the START/STOP button to reset the seconds to 0 or make the numbers of the parameter scroll until you reach the desired value. Hold the button down to set more rapidly Press RECALL again to leave the setting mode.

3 Stopwatch mode

2 Daily Alarm Mode

RECALL SLOW FAST LAP STW

AL AM:12:00 00

00:00:00:00:092 4

AM:12:13 33
START/STOP : start/stop the stopwatch RECALL : recall of intermediate times recorded SPLIT/RESET : to record an intermediate time MODE : go to the following mode Display : Upper line: the current value of the stopwatch and, if needed, SPLIT - Bottom line: LAP, the time for this lap In this mode, the screen will display the letters STW in the middle of the screen (flashing) when the stopwatch is functioning and STOP when it has stopped. Once the stopwatch has stopped, the word STOP will appear to the left of the screen. The stopwatch measures the intermediate times (SPLIT, the time that has passed since the start up to the given point in time) and the time for the lap (LAP, the time that has passed since the last partial measurement of time up to the given point). It measures and saves the first 10 measurements of intermediate time in memory. DPART START LAP 1 SPLIT 1 SPLIT 2 SPLIT 3 END : SPLIT LAP 2 LAP 3 END : LAP m 800 m 1200 m 1500 m
START/STOP : activate/deactivate the alarm RECALL : to enter the setting mode SPLIT/RESET : inactive MODE : go to the following mode Display Top line ::Wake-up time - Bottom line : Time
The symbol for the daily alarm will appear if the function is selected (see corresponding chapter).
The ALARM symbol will appear for several seconds upon arriving in this mode, and then remain displayed on the top line. will read the time On the bottom line, you12h or 24h mode. displayed according to the setting, as seen in the preceding chapter, in On the top line, the alarm time will appear in the same format as that of the time, which was set in the time date mode.
Press the START/STOP button to alternate between activating and deactivating the alarm. Set theaalarm : time (2s) on the RECALL button. The word SET and the number for the Press for longer
16 alarm hours will indicate that you have entered the setting mode. Press the SPLIT/RESET button repeatedly to change the parameter to be set, following the sequence Hour-minutes-.

The current value of - hour : minutes seconds : 1/100s). Thethe stopwatch is displayed on the top line. (formatintermediate time : maximum value is 99 h 59min 59s 99. When an is measured, the value of this time is frozen and displayed for 5 seconds. The value of the lap time is displayed on the lower line (LAP) (format - hour : minutes : seconds, hundredths of seconds). The intermediate time counter is displayed on the top right of the screen to three figures.
ATTENTION : When the stopwatch has stopped, you can only leave the memory recall mode after scrolling through all the intermediate times or pressing once on the MODE button. Press SPLIT/RESET to erase all recordings. 4 Pacer mode (Pacer)
To re-initialize the stopwatch press the SPLIT/RESET button to reset to 0. When the stopwatch has stopped,
started/stopped the START/STOP time The stopwatch isbe accumulated ifby pressingSTART/STOP again button. Severalmeameasurements can you press between each surement.
When the stopwatch is going, you can display the intermediate time measurements and lap times on the corresponding lines by pressing repeatedly on the SPLIT/LAP button. Each time you press, the intermediate time counter goes to the next measurement. Once it has reached number 10, the counter flashes to signal that the memory is full.

PACER 15

When the stopwatch has stopped (START/STOP), the last lap time is put in the memory. Using the memory. the first 10 intermediate times and lap times are memorized. When using the stopwatch,
They can be recalled whether the stopwatch is going or not by pressing the RECALL button. The order of reading is different depending on whether the stopwatch is functioning or not. the stopwatch is Ifpressing RECALLfunctioning : you will make the values already put into the memory By repeatedly, scroll in the following order : The fastest lap time (FAST) The slowest lap time (SLOW) The last lap time (x) The next to last lap time (x-1) the 1st lap time (1) If the stopwatch is not functioning : By pressing RECALL repeatedly, you will make the values already put into the memory scroll in the following order : The fastest lap time (FAST) The slowest lap time (SLOW) The FIRST lap time (1) The SECOND lap time (2) the next to last lap time (x-1) the last lap time (x)

START/STOP : start / stop the pacer RECALL : no action SPLIT/RESET : to increase the frequency of the pacer MODE : go to the following mode Display Top line ::PACER - Bottom line: pacer frequency will flash the screen in this mode. The screensymbol willthe word ifPACER at the top ofcorresponding mode). alarm appear it (see The word PACER will flash at the is selected of the screen if it is activated. bottom left The you will read the the rhythm set, from 01 to 240 On the bottom line,values : 1, 2, 3, 4,value of15, 20, 30, 40, 50, 60, 80, 100, pulsations per minute (possible 5, 10, 110, 120, 140, 160, 180, 200, 220, 240)
Setting the rhythm value. to scroll through the rhythm values incrementally. Press the SPLIT/RESET button Press the START/STOP button to start or stop the pacer. When the pacer is activated, the word PACER will flash.

5 Countdown Mode (Timer)

2 possible countdown modes : Down and Up : the countdown begins at the starting value, goes down to 0, beeps, and then starts the stopwatch at the beep. Repeated timer: repeated countdown. The countdown begins at the starting value, goes down to 0, beeps, and then begins again at the starting value while counting the number of countdowns with the repetition counter. You go from one to the other by pressing for a longer time on the SPLIT/RESET button.
Setting the starting value of the countdown Press for a longer time (2s) on the RECALL button. The indication of the set value will flash to indicate that you have entered the setting mode. Press repeatedly on the SPLIT/RESET button to change the parameter to set following the sequence Hour-minutes-seconds When one of the elements flashes, press the START/STOP button to make the numbers scroll until you reach the desired value. Press RECALL again to leave the setting mode. Repeated timer : (symbole )

00:00:0000 00:00:0000

Use The START/STOP button starts or stops the countdown. When the countdown has stopped, press the SPLIT/RESET button to reinitialize it at its set value. When the count arrives at 0, a 5 second buzzer will be heard. The repetition counter (X) has increased by 1 unit. Then the countdown begins again at its initial value and counts the same interval of time again. And so forth A press on the START/STOP button will stop the counting. A press on SPLIT/RESET will reset the repetition counter to 0 and reinitialize the countdown at its starting value. Setting the starting value of the countdown Press for a longer time (2s) on the RECALL button. The indication of the set value will flash to indicate that you have entered the setting mode. Press repeatedly on the SPLIT/RESET button to change the parameter to set following the sequence Hour-minutes-seconds When one of the elements flashes, press the START/STOP button to make the numbers scroll until you reach the desired value. Press RECALL again to leave the setting mode.
START/STOP : to start/stop the TIMER RECALL : to set the values SPLIT/RESET : to set the values MODE : go to the following mode Display : - Top line : the current value of the countdown, repetition counter. - Bottom line: starting value of the countdown. On the top line, you will read the current value in the course of the countdown (format hours : minutes : seconds : hundredths of seconds). On the lower line, you will read the value of the countdown setting (format - hour : minutes : seconds) At the top left of the screen will appear the indication of the repetition counter for the countdown to three figures. At the bottom left of the screen, a pictogram indicates the type of active countdown. The word TIMER will flash (in all modes) when the countdown is activated.

Contact

As we strive to continually improve the products we develop, we are interested in your feedback regarding the quality, the functionality and the usage of our products. In France, please call the customer service center at: (local call rate) For any other country, please leave a message under the relevant heading on our website: www.decathlon.com We promise to answer you promptly.
Down and up timer : (symbole
Use The START/STOP button starts or stops the countdown.
When the countdown has stopped, press the SPLIT/RESET button to reinitialize it at its set value. When the count arrives at 0, a 5 second buzzer will be heard. Beginning with 0, the timer increases the time like a stopwatch. A press on the START/STOP button will stop the counting. A press on SPLIT/RESET will reset the repetition counter to 0 and reinitialize the countdown at its starting value. 20