Geonaute Watch Chrono 900
Here you can find all about Geonaute Watch Chrono 900 like manual and other informations. For example: review.
Geonaute Watch Chrono 900 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Geonaute Watch Chrono 900 please write about it to help other people. [ Report abuse or wrong photo | Share your Geonaute Watch Chrono 900 photo ]
Geonaute Watch Chrono 900, size: 1.4 MB
Geonaute Watch Chrono 900
User reviews and opinions
|qazwiz||10:20pm on Tuesday, September 14th, 2010|
|I had high hopes for this monitor. I bought two of them. Out of the box, one unit had a dead pixel smack dab in the middle of the monitor.|
|Jeff 9500||3:32am on Friday, September 10th, 2010|
|For this price range, the cons are acceptable. No dead pixles. Huge screen compared to my 15" laptop. Very good value. I have never had a big LCD before and it a little hard to get used to, but I really like it.|
|ezflyeroo||2:09am on Wednesday, June 30th, 2010|
|Cons: Inconsistent color (lower right corner especially off), touch sensitive buttons that do not respond well, insufficient controls to calibrate.|
|rbroberts||4:03am on Monday, June 7th, 2010|
|Really happy with My Acer 22" LCD Just wanted to put a review out that after along time of use my Acer AL2216Wbd is still running perfectly with no pr... Excellent monitor I gave this a 4 because of the appalling service by Acer themselves, you have to pay for shipping to them if there is any issue.|
|CeeTee1||3:29pm on Wednesday, June 2nd, 2010|
|Since its inception, Acer has evolved from a manufacturing powerhouse to a globally recognized computer brand. my future Permalink well just|
|jfm.lange||2:49am on Wednesday, May 5th, 2010|
|Bare FruitTM LLC, Organic Dried Cherries, 2.5-Ounce Pouches available as a Pack of 24, total of 62.4 ounces, of delicious. Foolishly, I was a bit reluctant in my excitement about this one because of the Acer name. True, Acer has been around for a while.|
|Stu2||9:27pm on Saturday, May 1st, 2010|
|YOU CAN GET THIS MONITOR FREE THIS IS TOO EXPENSIVE TO BUY Great picture-no bad pixels. Low price. No height or swivel adjustment. Stand a little shaky.|
|futbolal21||11:56pm on Saturday, March 27th, 2010|
|"I bought this monitor on sale during the holiday season and have been very satisfied so far. "I upgraded to this monitor from an old ViewSonic 18" LCD. I like it except for one very annoying flaw.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Chrono 900 FR-EN-ZH.qxd
RECALL SPLIT/RESET START/STOP
Congratulations on your purchase of the TrtL 900 stopwatch! This device offers very good measuring precision as well as great ease of use and a series of high-performance functions. The TrtL 900 EN will accompany you for a long time during your athletic activities, when monitoring training or very simply for any measurement of time.
Main data, e.g. time, stopwatch time
Stopwatch operating light Lap, split timer Memory : slowest lap, fastest lap, average lap time DownnUp countdown indicator Split countdown timer indicator
RECALL LAP SLOW STOP FAST PACER AVG SPLIT
Mi / Hr Km / Hr BPM
Secondary data, e.g. LAP, date
Secondary data, e.g. SPLIT, year Speed units Frequency units
: SPLIT/RESET, RECALL, START/STOP MODE, CLAIRAGE , 5 Buttonslines 3 display precision to 1/100 of a second up to 10 hours measuring batteries (CR2032). Replaceable Case is waterproof to water spray. May be used for water sports or in the rain. Functions Stopwatch for 59 minutes Time (h, min, sup to 99 hours and hour display) in Date (day, month, 12 hour and 24 calculation of the day of the week year), automatic 999 intermediate times (LAP) 299 memories that can be consulted during functioning, calculation of the fastest and slowest LAP, value of the average LAP countdown systems (timer) 3 decrementation to 1/100s that can be set from 1s to 99h59min59s by steps of 1 s and Pacer (pacer) that can be set for from 05 to 240 beeps per minute Calculation of speed in km/h and m/h (conversion possible) Measurement of average frequency over 2 to 30 cycles
Characteristics and functions
Normal conditions of use
FULL SPEED TIME DIST
This stopwatch has been designed to measure intervals of time in order to optimize athletic training or for measuring performance. It is not intended for calibrating technical or safety devices (especially braking systems). It is no longer designed for arbitrating competition or to be used for any commercial purpose.
Beep Training indicator countdown timer indicator
Time Distance Memory Speed mode mode indicator full indicator indicator indicator
If you do not respect the following precautions, you risk losing the Dcathlon guarantee. Waterproof design: The stopwatch is classified as "water resistant". It can therefore be used in humid conditions and is water-resistant in rain or water spray. But it is not waterproof in
cases of immersion, nor is it designed to be used under water. Care and maintenance : To preserve the Dcathlon guarantee, any operation or repair must be exclusively entrusted to a Dcathlon electronics shop. If one is not available, no dysfunction can be claimed in the context of the Decathlon guarantee, with the exception of hidden defects. the seal for water-tightness. When changing the battery, replaceinfiltrates, and check device immediately. Water may check the If condensation appears or water attack the electronic elements inside the casing. Avoid submitting the device to hard shocks like those received when falling onto a hard surface. Do not expose extreme Clean only with the stopwatch tosoft cloth,temperatures. detergents or soap, which may a slightly damp, and do not use cause the materials to deteriorate. Keep the device away from any strong electrical field or area of static electricity.
Restrictions on use / guidelines governing use :
Scrolling through the different modes
By pressing repeatedly on the MODE button, you can access the different functioning modes as shown in the following diagram. You must make the screen corresponding to the desired function appear in order to use or set it 1 Time/Date Mode (Time) 2 Daily Alarm Mode 3 Pacer mode (Pacer) 4 Countdown Mode (Timer) 5 Stopwatch mode 6 Speed Calculation Mode 7 Frequency calculation mode 1 Time/Date Mode 2 Daily Alarm Mode 3 Pacer mode 4 Countdown Mode 5 Stopwatch mode 6 Speed Mode 7 Frequency Mode
Operating problems: Recycling:
If you encounter a problem with the read-out please check the batteries first.
The crossed out dustbin sign means that this product and its batteries cannot be thrown out with domestic waste. They should be treated apart. When you have finished with them, drop them at an authorised collection point so they can be recycled. This gesture will go towards protecting the environment and your health.
Time/Date Mode (Time)
Initialization : In case of problems with the display or a significant dysfunction, press the 4 buttons simultaneously (START/STOP MODE, RECALL, SPLIT/RESET) , to reinitialize the stopwatch (RESET). batteries : The stopwatch uses a CR2032 type battery
Replacing the battery is done by unscrewing the back cover a quarter turn, using a coin, for example. Inserting the battery is done according to the following diagram. Make sure the polarities are correctly placed. Remember to protect the environment and dispose of your batteries or your used product in a place where they can be recycled.
The setting of the time, the date, the TIMER and the PACER are explained in the sections dedicated to the different modes
FULL SPEED TIME
START/STOP : activate/deactivate the beeping sound RECALL : to enter the setting mode SPLIT/RESET : to go to 12/24h mode MODE : go to the following mode
Display : Top line: Time - Middle line: Day, week and date - Bottom line: Year TIME the lower left The screen will display the wordappear at the function is of the screen.corresponding The symbol for the daily alarm will if selected (see chapter). The sound that signals activation of the buttons is also present in the lower left of the screen if activated (press START/STOP to activate or deactivate).
Daily Alarm Mode
START/STOP : activate/deactivate the alarm RECALL : to enter the setting mode SPLIT/RESET : inactive MODE : go to the following mode Display : Top line: Time - Middle line: ALARM - Bottom line: Wake-up time
A brief display on the central line (TIME) indicates that you have arrived in this mode. START/STOP: beeping sound (activation/deactivation) top line, you the time in mode in SOn the mode (0-24 will readGoing fromAnglo-Saxon other (0-12 hours AM/PM) orthe European hours). one to the is done by pressing
SPLIT/RESET button. On the middle line, you will read the date in the format day week-day of the month-month or week-month-day of the month respectively, depending on whether the European mode (EU) or Anglo-Saxon mode (US) has been activated (see settings chapter). The current year will appear on the lower line. The day of the week is automatically calculated based on the year and the date.
Setting the time and date. on the RECALL button. The word SET and the number Press for a longer time (2s)
of seconds will flash to indicate that you have entered the setting mode. Press the SPLIT/RESET button repeatedly to change the parameter to set, following sequence seconds-hour-minutes-year-month-day-display in European or Anglo-Saxon mode (date in the format DD/MM or MM//YY) When the elements flash, press the START/STOP button to reset the seconds to 0 or scroll through the numbers of the parameter to the desired value. Hold the button down to set more rapidly. Press RECALL again to leave the setting mode.
The indication for the daily alarm will appear if the function has been selected (see corresponding chapter).
The word ALARM will appear for several seconds once you are in this mode, then remain displayed on the middle line.
On the top line, you willorread the time displayed according to the setting made in the preceding chapter, in 12h 24h mode.
On the bottom line, you will read the alarm time in the same format as that of the time, set in the time date mode.
Press the START/STOP button to alternate between activating and deactivating the alarm. Set the alarm on the RECALL button. The word SET and the number for the alarm Press longer (2s)
hours will flash to indicate that you have entered the setting mode.
Press the SPLIT/RESET button repeatedly to change the parameter to set following the sequence hour-minutes-
When one of the elements flashes, press the START/STOP button to make the numbers scroll until you reach the desired value. Press RECALL again to leave the setting mode. off, When the alarm goesstop it sounds for 20 seconds. Press on any button to the sounding. 22 23
Pacer mode (PACER)
Countdown Mode (TIMER)
START/STOP : start / stop the timer RECALL : decrease the pacer value SPLIT/RESET : to increase the frequency of the pacer MODE : go to the following mode Display: - Top line: displays the stopwatch if it is active. Empty if not. - Middle line : PACER - Bottom line : pacer frequency screen displays the word PACER in the middle The letters BPM (beats per minute) are found in theof the screen in this mode lower right of the The alarm symbol appears if it is selected (see corresponding mode). screen. The word PACER will flash at the bottom left of the screen if it is activated. The the bottom line, you will read the pacer value set, from 01 to 240 pulsations per On (possible values: 1, 2, 3, 4, 5, 10, 15, 20, 30, 40, 50, 60, 80, 100, 110, 120, 130, minute 140, 150, 160, 180, 200, 220, 240)
START/STOP : start/stop the timer RECALL : to enter the setting mode SPLIT/RESET : to set the values MODE : go to the following mode Display : - Top line : the current value of the countdown. - Middle line: TR, number of the countdown and repetition counter. - Bottom line: starting value of the countdown. On the top line, you will read the current countdown value (format - hour : minutes : seconds : hundredths of seconds). On the lower line, you will read the value of the countdown setting (format - hour : minutes : seconds). In the middle, to the left of the screen, the indication of the repetition counter for the countdown will appear, to three digits. On the lower left of the screen will appear a pictogram indicating the type of countdown that is active. This pictogram will flash (in all the modes) when the countdown is activated. A "STOP" pictogram is displayed when the countdown has stopped. 3 possible countdown modes: Down and Up : the countdown begins at the starting value, goes down to 0, beeps, and then starts the stopwatch at the beep. Repeated timer : repeated countdown. The countdown begins at the starting value, goes down to 0, beeps, and then begins again at the starting value while counting the number of countdowns with the repetition counter. Training timer : countdown for training. You can set up to 9 different, successive countdowns. You will also set the number of repetitions of the sequence thus formed. You may go from one to the other by pressing for a longer time on the SLIP/RESET button.
Setting the rhythm value. button Press the SPLIT/RESET
to scroll through the pacer values incrementally. Press RECALL to scroll downwards.
Press the START/STOP button to start or stop the pacer. When the pacer is activated, the word PACER will flash.
Down and up timer (symbole ) Use The START/STOP button starts or stops the countdown When the countdown has stopped, press the SPLIT/RESET button to reinitialize it at its set value. When the count arrives at 0, a 5 second buzz is emitted. Beginning with 0, the timer increases the time like a stopwatch. A press on the START/STOP button will stop the counting. A press on SPLIT/RESET rwill reset the repetition counter to 0 and reinitialize the countdown at its starting value.
training sequence Initial setting for the(2s) on the RECALL button to enter the setting mode. Press for a longer time The indication of the symbol for countdown 1 (T1) will flash, and the word SET will be displayed and also flash. Press the SPLIT/RESET button repeatedly to change the parameter to be set following the sequence number of the timer-hour-minutes-seconds When one of the elements flashes, press the START/STOP button to make the numbers scroll until you reach the desired value. When T1 flashes, press SPLIT/RESET for a longer time to go to the setting of the number of repetitions of the sequence. The number between the square brackets will flash and indicate the number of repetitions of the GLOBAL sequence. This number can be changed for the whole series when setting each timer. When T1 flashes, press START/STOP to go to the settings mode for the following timers. The starting values set for each timer will be displayed on the bottom line. Press RECALL again to leave the setting mode The number of repetitions of the total sequence will be displayed to the right of the repetition counter: ex, in our case /03.
value Settingathe starting(2s) onof the countdown The indication of the set value will flash Press for longer time the RECALL button. to indicate that you have entered the setting mode. Press repeatedly on the SPLIT/RESET button to change the parameter to set following the sequence hour-minutes-seconds When one of the elements flashes, press the START/STOP button to make the numbers scroll until you reach the desired value. Press RECALL again to leave the setting mode. Repeated timer (symbole )
Use The START/STOP button starts or stops the countdown.
When the countdown has stopped, press the SPLIT/RESET button to reinitialize it at its set value. When the count arrives at 0, a 5 second buzz is emitted. The repetition counter (between the square brackets) goes up by 1 unit. Then the countdown begins with its initial value and counts down the same interval of time again. And so forth A press on the START/STOP button will stop the counting. A press on SPLIT/RESET will reset the repetition counter to 0 and reinitialize the countdown at its starting value. value Settingathe starting(2s) onof the countdown The indication of the set value will flash Press for longer time the RECALL button. to indicate that you have entered the setting mode. Press repeatedly on the SPLIT/RESET button to change the parameter to set following the sequence hour-minutes-seconds When one of the elements flashes, press the START/STOP button to make the numbers scroll until you reach the desired value. Press RECALL again to leave the setting mode. Training timer (symbole )
Use the RECALL button (brief press), scroll through the different countdowns until you Using
come to the one that indicates the interval of time for the first block (in our case T1). This step enables you to check that the device is correctly programmed. The START/STOP button starts or stops the session The countdowns are strung together in numerical order (T1-T2-T3) until a countdown programmed at a null value, then begins again with T1. The repetition counter counts up. If the first countdown is not T1, the repetition counter increases by 1 just before beginning again with the countdown from the beginning (ex: 3 countdowns, T1, T2, T3 have been programmed. The first of the session is T3. The counter is therefore increased after having completed T3, then T1, then T2, and just before beginning T3 again).
Buzzers : auditorily between the types of buzzing for countdowns and for the To differentiate
progression of the session, the final beeps have been differentiated: End of a countdown: 3 beeps in close succession. End of a repetition: 2*3 beeps in close succession End of the session: 4*3 beeps in close succession For the preceding example : Start ! Timer 1 : 45s. 3 beeps in close succession Timer 2 : 15s. 2*3 beeps in close succession Counter = 1/3 Timer 1 : 45s. 3 beeps in close succession Timer 2 : 15s. 2*3 beeps in close succession Counter = 2/3 Timer 1 : 45s. 3 beeps in close succession Timer 2 : 15s. 4*3 beeps in close succession Counter = 3/3 End of the session. A press on the START/STOP button will stop the counting. A press on SPLIT/RESET will reset the repetition counter to 0 and reinitialize the countdown at its starting value. 27
This type of countdown is designed for programming a training session composed of blocks of different intensity and lengths that are strung together, the sequence being
repeated a certain number of predetermined times. it is therefore necessary to program the session. Before starting the training session,example to follow : To simplify the procedure, here is an You must complete a training session alternating 3 blocks of 45 seconds of fast running and 15 seconds of walking.
On the read current stopwatch 1/100s).top line, you willvalue the99 h 59min 59s 99 value (Format - hour : minutes : seconds : The maximum is middle line, On thehundredths ofyou will read the lap time value (LAP) (Format - hour : minutes : seconds, seconds). On the top left of the screen, the three-digit indication of the intermediate time counter will appear. On the bottom line you will read the value for the intermediate times (SPLIT).
00:00:0912 00:00:190 5
stopwatch To re-initialize the has stopped, press the SPLIT/RESET button for 3s to reset to 0. When the stopwatch
The stopwatch is started/stopped by pressing the START/STOP button. You can accumulate several time measurements by pressing START/STOP again between each measurement. When the stopwatch is going, by pressing repeatedly on the SPLIT/LAP button, you can display intermediate times and lap times on the corresponding lines. With each press, the intermediate time counter goes up by one. Once the number 299 is reached, the counter will flash to signal that the memory is full. Display of the word FULL When the stopwatch has stopped (START/STOP), the last lap is put into memory. memory. Using thethe stopwatch, the first 299 intermediate times and lap times are memorized. When using They can be recalled, whether the stopwatch is in action or not, by pressing the RECALL button. The order of reading is different depending on whether the stopwatch is functioning or not. If the stopwatch is functioning: By pressing RECALL repeatedly, scroll through the values already put into memory in the following order : - The fastest lap time (FAST) - The slowest lap time (SLOW) - The average lap time of the X measurements recorded (AVG) - The last lap time (x) - The next to last lap time (x-1) - the 1st lap time(1) If the stopwatch is not functioning: By pressing RECALL repeatedly, scroll through the values already put into memory in the following order : - The fastest lap time (FAST) - The slowest lap time (SLOW) - The average lap time of the X measurements recorded (AVG) - The FIRST lap time (1) - The SECOND lap time (2) - the next to last lap time (x-1) - the last lap time (x) 29
START/STOP : start/stop the stopwatch RECALL : recall of intermediate times recorded SPLIT/RESET : to record an intermediate time MODE : go to the following mode Display Top line: :the current value of the stopwatch - Middle line : LAP, the time around - Bottom line : SPLIT, the intermediate time this mode, middle of the screen when Instopwatch isthe screen will display the letters STW in the the word STOP will appear functioning. When the stopwatch is stopped, the on the left of the screen. stopwatch you measure times (SPLIT, the time passed Thethe start upenables giventopoint) and intermediate the time passed since the last since to the laps (LAP, partial time measurement up to the given point). It enables you to measure up to 999 intermediate times and to store the first 299 measurements in memory. DPART START LAP 1 SPLIT1 SPLIT 2 SPLIT 3 END : SPLIT LAP 2 LAP 3 LAP m 800 m 1200 m 1500 m
ATTENTION : When the stopwatch has stopped, you can only leave the memory
recall mode after scrolling through all the intermediate times or pressing once on the MODE button. Appuyez 3s sur SPLIT/RESET pour effacer tous les enregistrements.
Distance Setting Modethen hold RECALL down for 2 seconds to enter the setting mode) Reset the time to zero, and
The "DIST" icon will be displayed and indicates that the distance setting mode has been activated. The KM icon will flash for selection, as well as SET UNIT (ret unit)! Enter the setting "KM" -kilometer, or "M" - mile The maximum value that can be set is 999,999 1. Press START/STOP: set "KM" or "MI" 2. Press SPLIT/RESET: select the following field for setting. The number will flash. 3. Press START/STOP to make the numerals scroll by. 4. Proceed thus for all the distance numbers. The point between the numerals represents the decimal point. Ex: 1.435 km or 1.435 miles. 5. 1. When you have finished with all the settings, press RECALL to exit the settings mode. Speed Mode Functioning of thebe measured. Preset the distance to The stopwatch is started/stopped by pressing the START/STOP button. You can accumulate several time measurements by pressing START/STOP again between each measurement. At each press on STOP, the speed in Km/h or Mi/h (according to the setting) will be displayed on the bottom line. When the stopwatch is going, by pressing repeatedly on the SPLIT/LAP button, you can display and record lap times and average speed for the lap times. With each press, the intermediate time counter goes up by one. Once the number 299 is reached, the counter will flash to signal that the memory is full. When the stopwatch has stopped (START/STOP), the last lap is put into memory.
ATTENTION : When the speed calculation (SPEED, see corresponding mode) is
in progress, the stopwatch function cannot be used.
6 Speed Calculation Mode (SPEED)
START/STOP : Start / Stop the count (remember: you cannot start if the distance is set at 0) SPLIT/RESET : if the stopwatch is functioning: time elapsed if the stopwatch has stopped: reset to zero RECALL : if the data have been stored in memory: enables you to enter the memory recall mode if the time has been reset to zero, hold the button down now for 2 seconds: enables you to enter the distance setting mode. MODE : go to the following mode
ATTENTION : Since the maximum speed display is 999,999, if the calculated speed is larger than this value, "ERROR" will be displayed on the top line, and the value of the speed will not be recorded in the memory.
When you are using this mode, the value for the distance cannot be zero. (Initial Mode) Display : The counter is found on the middle line to the left of the screen - The lower line indicates the fixed distance (initial = 0.000), then the speed when functioning - The middle line indicates the lap time The DIST KM icon or Mi is displayed - The top line indicates the time elapsed
Memory Recall in Speed Mode the speed mode is functioning or whether it is The memory can be recalled whether
stopped. With each press of the RECALL button Speed / fastest lap, speed / slowest lap, then speed / average lap, after which the times lapsed are recalled, beginning with the first Speed / fastest lap, speed / slowest lap, then speed / average lap, after which the times lapsed are recalled, beginning with the last 31
When the stopwatch is stopped
When the stopwatch is functioning
ATTENTION : You can convert the speed measurement from km/h to m/h (miles per hour) by pressing SPLIT/RESET briefly when the stopwatch is stopped. Holding the button down for a longer time triggers the stopwatch to reset to 0 (the distance measured is then displayed on the bottom line). The distance can also be converted to miles or kilometers by briefly pressing SPLIT/RESET when the stopwatch is stopped. ATTENTION : If the stopwatch is functioning or if the intermediate times have been memorized, the SPEED mode is not available. On the other hand, if the speeds have been memorized or if the speed mode is active, the stopwatch mode is not available. 7 Frequency calculation mode (STROKE)
pressing START/STOP once the xth movement has been completed. The number of movements (strides) per minute is displayed on the bottom line while the measured time is indicated on the top line.
ATTENTION : Be sure to take into account the INTERVALS of time between the impacts and not the impacts themselves. Ex : impact..impact..impact..impact = 3 strides and not 4 Note : 1. If you press the START and STOP buttons too quickly (in less than 1/8 of a second (0.125 sec)), the screen will display "ERROR". This indicates that the value has passed by too quickly to indicate it. 2. If you press the START and STOP buttons after too long a time, the screen will display "ERROR". This indicates that the period of time is too long and that the STROKE mode is useless for analysis.
As we strive to continually improve the products we develop, we are interested in your feedback regarding the quality, the functionality and the usage of our products. In France, please call the customer service center at: (local call rate) For any other country, please leave a message under the relevant heading on our website: www.decathlon.com We promise to answer you promptly.
START/STOP : begin / stop the measurement of the movement SPLIT/RESET : - if the STROKE mode is functioning no function - if the STROKE mode has been stopped resets the STROKE display to 2400 RECALL : entry into setting mode MODE : go to the following mode function a counter with a The " STROKEin" rowing orisswimming, of the frequency of an action lapsedcertain rhythm (the movements strides in running). The time x beats (parameter that can be set) is measured, and the stopwatch displays the average frequency in beats per minute over this period. Setting the number of beats by which the frequency is calculated Press RECALL for 3s. The message SET will flash as well as the current value of the number of beats on the bottom line. Scroll through the values (from 2 to 30) by pressing START/STOP. Press RECALL to store this value in memory. Measurement of a frequency Suppose that the value X has been set during the preceding step (display in the counter between the square brackets) Begin the measurement by pressing START/STOP and stop the measurement by
DN-A7100 KM-3530 CT-32G12V WAG54GS ZIT64X Aladin AIR Bonfiglioli BS MS09AC CD6551B 53 Xpressmusic Webcam Race Camp DFX-8500 M228WA-BZ UP-820N Syncmaster 971P SCX-6555N LG-G510 Abit BE6 FLS872C X1161N Lrfc22750SW - 35 Suunto D3 SCC-131BP VP-D463 Review CJ2M-cpu3 DCR-TRV285E 42VP4 RH2T80 EX-Z65 8802 DPF Plantronics CA10 FX200 CLX-6240 XEU HR-J668 Nikon 4500 Pleo Pleo Siemens CL60 V4000 Plus TK7522 Connector SMC2802W KDL-46W5710 LD-2120W WK-110 R-246 TA-N80ES WD7101CKW WPC54GS XR-C220 HX2755 VP-D385I Micro LCD1760VM Midnight Star P-6000 DC120 Series TCS-100DV Detector TU911 Iphone CH-DVR 2500 T 1725 Germany DMV-PRO E6307 KV-21FX30K Sahe90 KX-TS550W DX6340 V220I 26121T MW123ST-XSA DV-GH750 WB500 DWD5410 SC-7830 M3688 CTK-2000 VP-DC171W 22PFL5403D 10 STR-SE501 DTF-521 Notebook Voicemailpro B4462N0 IC-Z1E Discovery SE VP-D380I GO 6430 Maximizer 12K-CHA CS-PA12GKD Samsung 173T Camera Gpsmap 3210 E2562 63-16 C
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101