Ref notice : 439.889
Decathlon 4 bd de Mons BP Villeneuve d'Ascq cedex France

400/0000361/12

uLire attentivement la notice. uPlease read the owner's manual carefully. uLea atentamente las instrucciones. uLesen Sie die Anleitung aufmerksam durch. uLeggere attentamente le istruzioni per luso. uLees zorgvuldig de handleiding. uLer atentamente as instrues. uPrzeczytaj uwanie instrukcj. uFigyelmesen olvassa el a tjkoztatt. u . u . uu
M O ont ut r do e o or ut 50 wa doo 0W tch r

LIMITED WARRANTY

GEONAUTE guarantees the initial purchaser that this watch is free from defects of materials or manufacture for a period of two years from the date of purchase. Please keep your receipt as proof of purchase. - This guarantee does not cover damage resulting from misuse, from a failure to respect the precautions for use nor from accidents; neither does this guarantee cover damage resulting from improper maintenance or from use of the item for commercial purposes. - This warranty does not cover damage resulting from repairs carried out by persons not authorized by GEONAUTE. - The guarantees contained herein explicitly replace all other guarantees including the implicit guarantee of fair and trade quality and/or adaptation to use. GEONAUTE cannot under any circumstances be held responsible for any damage, be it direct or indirect, general or specific, caused by or related to these directions for use or the products they describe. - During the warranty period, the item will either be repaired free of charge by an authorized repair service or replaced free of charge (depending on the distributor). - The guarantee does not cover batteries or cracked or broken casings where signs of a blow are evident.

UV INDEX

12:3845

WE 1-01

1 - Time 2 - Minute 3 - Second 4 - Day of the week 5 - Date 6 - Alarm indicator 7 - Chime indicator
8 - UV index icon 9 - UV index value, temperature 10 - Moon phase 11 - Tide indicator 12 - Time zone indicator

NORMAL CONDITIONS OF USE

This watch is designed to be worn on the wrist, for leisure and light sports activities. It is for telling the time and measuring lap times, thanks to its stopwatch function. This watch measures numerous parameters of the environment: UV index, temperature, moon phases, and tide schedules.
will go back to normal once it has cooled down again. Use only a soft, damp cloth to clean. Do not use detergents, as they could damage the materials the watch is made of. Do not expose the watch to excessively bright light for prolonged periods of time. Doing so could cause the plastic components to discolor.

BATTERIES

This watch runs on a CR2025 battery.

PRECAUTIONS FOR USE

Waterproof design: This watch is waterproof to 5 ATM, so it can be used in damp conditions, in heavy rain, in the shower, and for swimming. However, do not wear the watch while diving or at depths below 5 meters. Do not handle the buttons under water. Handle the device with care; do not drop it or bang it. Do not dismantle the watch. This would void the warranty and could cause damage and loss of waterproofing. Please read thus owner's manual carefully before use. Retain the owner's manual for the entire service life of the watch. Do not subject the watch to extreme temperatures. If the watch is subjected to direct sunlight for a long period of time, the display may darken temporarily, but

Important:

The display flashing abnormally or the watch malfunctioning generally indicates that the battery is low and should be replaced. We recommend that you take the watch to a DECATHLON specialist to have the battery replaced. If you change the battery yourself, you risk damaging the seal, thus losing the waterproof design as well as voiding your warranty. Please check the availability of the battery with your dealer before replacing it. Battery life can vary, depending on how long it was stored in the shop and the way in which the watch is used.

RECYCLING

The crossed-out wastebasket symbol indicates that this product and the batteries it contains cannot be disposed of with household waste. They are subject to a specific type of sorting. Deposit the batteries and your unusable electronic product in an authorized collection area for recycling. This treatment of your electronic waste will protect the environment and your health.

1 - Time mode (TIME)

S1 : alternate between temperature/UV index displays S2 : change the time zone S3 : switch to the next mode. S4 : quick press: electroluminescence long press: enter setting mode

MI UV LO

NAVIGATION SYSTEM
This watch has 7 operating modes: A time mode An alarm mode A stopwatch mode A countdown mode A tide schedule mode A temperature mode A UV index measurement mode The procedure for going from one mode to another is shown in the following diagram:
S3 Time/date Alarm S3 Stopwatch S3 Countdown feature Recall S3 S3 S3 Tide S3 Temperature S3 UV
In normal mode, the watch displays the time and the date, including the day of the week, as well as the temperature, the UV index and the tides.

SETTING THE TIME

Press on S4 for 2 seconds: enter time setting mode and the "NIGHT OFF" symbol will flash. Press on S1: activate the "NIGHT ON" option (electroluminescence when you press on each function): the "moon and star" symbol is displayed (press on S2 to deactivate this option). Press on S3: the 12/24h symbols will flash. Press on S1: set the time display mode (12 hours, 24 hours). Press on S3: the hours will flash. Press on S1: set the hours. Proceed in this manner to successively set the minutes, the seconds, the year, the month and the day of the month.

Press on S4 at any time to exit time setting mode. The day of the week is calculated automatically within a period from 2003 to 2053.

2 - Alarm mode (ALARM)

S1 : activate/deactivate the alarm S2 : activate/deactivate the hourly beep S4 S3 : switch to the next mode. S4 : quick press: S3 electroluminescence long press: set the alarm

DISPLAY OF MOON MODES

On the watch, an icon indicates the current moon phase. A full cycle of the moon lasts 29.5 days. The phases are indicated according to the table below:

12:00AL

USING THE ALARM
Press on S1: activate and deactivate the selected alarm. Press on S2: activate and deactivate the hourly beep (chimes).

SETTING THE ALARM

1 - New moon 2 - Waxing crescent 3 - First quarter 4 - Waxing gibbous 5 - Full moon 6 - Waning gibbous 7 - Last quarter 8 - Waning crescent and the cycle starts over until the next new moon
Press on S4 for 2 seconds: enter setting mode and the hour digits will flash. Press on S1 or S2: set the hours. Press on S3: the minute digits will flash. Press on S1 or S2: set the minutes. Press on S4 at any time to exit setting mode.
3 - Stopwatch mode (CHRONO)
S1 : start/stop stopwatch S4 S2 : lap time/clear the stopwatch 00'00"00 (long press) S3 S3 : switch to next mode S4 : quick press: electroluminescence long press: enter lap time recall mode
The LAP is the time elapsed since the last lap time.

Split1 Lap1

Split 2 Lap 2

Split 3 Lap 3

Split 4 Lap 4

USING THE STOPWATCH

Press on S1: start the stopwatch and the STW symbol is displayed while the stopwatch is timing. Press on S1: stop the stopwatch. Press for 2 seconds on S2: "RESET" is displayed and the stopwatch is cleared.
Press on S1: start the stopwatch. Press on S2: measure a lap time, the stopwatch keeps timing. The screen displays the LAP and the SPLIT for 3 seconds then goes back to the display of the current time. The watch can save up to 30 lap times. Press on S1: stop the stopwatch. Press on S2 for 2 seconds: "RESET" is displayed and the stopwatch is cleared. The stopwatch can measure times up to 23 hours, 59 minutes and 59 seconds.

LAP TIMES

The stopwatch included with this watch features 30 lap times. Each time a lap time is measured (quick press on S2 while the stopwatch is running) the watch will save the elapsed time (SPLIT) and the lap time (LAP). The SPLIT is the time elapsed since the stopwatch started timing (0) until the lap time.

RECALL OF LAP TIMES

In stopwatch mode: Press for 2 seconds on S4 to display the saved lap times. Press on S1: scroll up through the lap times. Press on S2: scroll down through the lap times.
Press on S3 to switch to countdown mode.
S1 : start/stop the countdown S2 : reset the countdown to its initial value S3 : switch to the next mode. S4 : quick press: electroluminescence long press: enter setting mode

00'00"00

5 - Tide schedule mode
S1 : display the schedule S1 S4 of the next tide. S2 : alternatively displays high 3:57H1 tide (HI)/ and low tide (LO). S2 S3 S3 : switch to the next mode. S4 : quick press: electroluminescence. long press: set the schedule of the next high tide (HI) or low tide (LO).

USING THE COUNTDOWN

This watch features 3 types of countdowns: 1. Countdown and stop (DOWN AND STOP) 2. Countdown and stopwatch (DOWN AND UP) 3. Repeated countdowns (DOWN AND REPEAT) Press on S1: start the countdown at the preset value (the TMR symbol appears). Press on S1: stop the countdown. Press on S2: reset the countdown to a preset value.

05'12.21

USING THE TIDE SCHEDULE FUNCTION
The tides are a natural phenomenon of rising and falling of the sea level in relation to land, influenced by the gravitational attraction of the Earth and the sun. The moon plays a larger role than the sun in this phenomenon.
SETTING THE VALUE OF THE COUNTDOWN
Press on S4 for 2 seconds: enter setting mode and the hour digits will flash. Press on S1 or S2: set the hours.

4 - Countdown mode

Press on S3: the minute digits will flash. Press on S1 or S2: set the minutes. Press on S3: the seconds digits will flash. Press on S1 or S2: set the seconds. Press on S3: the type of countdown flashes. Press on S1 or S2: set the type of countdown. Press on S4 at any time to exit setting mode. The starting value of the countdown may be set to 23 hours, 59 minutes, 59 seconds.

The tide cycle is approximately 12 hours and 42 minutes when the influence of the earth/moon system is isolated. Nevertheless, numerous factors influence the tides: the shape of the coast, the depth of the water, the ocean currents, the wind and the weather. This is why the prediction performed by this watch may differ from the actual schedule of the tides. For precise forecasts, consult the official tide schedule tables. Furthermore, this watch cannot predict the height of the tides or their coefficient, which also depends on the season and on various topographical factors. Press on S1: display the schedule of the next tide. The date is recalculated accordingly. Press on S2: switch the display from high tide to low tide.
SETTING THE TIDE SCHEDULE
The objective is to set the watch to a high tide or a low tide in order to initialize the cycle. In tide schedule mode: Press for 2 seconds on S4: enter tide setting mode and the HI/LO symbol will flash. Press on S1 or S2: set the high tide parameter and the low tide parameter for the next tide. Press on S3: the hours will flash. Press on S1 or S2: set the hours. Press on S3: the minute digits will flash. Press on S1 or S2: set the minutes. Press on S4 at any time to exit setting mode.

6 - Temperature mode

S1: alternatively displays the temperature in Celsius or in Fahrenheit S2: inactive S3: switch to the next mode. S4: quick press: electroluminescence long press: enter calibration mode

1 - Low tide

2 - Rising tide A graphic display shows the current status of the tide in 4 phases:

3 - High tide

4 - Falling tide
And the cycle starts over
USING THE TEMPERATURE FUNCTION
The temperature is measured within a range from 9.9C to +69.9C (14F to +158F). Important: to obtain a reliable temperature reading, remove the watch from your wrist to insulate it from the warmth of your body and place it on a table for about ten minutes so the casing will reach room temperature. In temperature mode, the temperature is taken about every 5 seconds.

USING THE UV MEASUREMENT

The UV index is a standard measurement that generally goes from 0 to 14. Under extreme conditions, values higher than 14 do exist. This watch displays a maximum value of 14. Important: these rays are very harmful; it is crucial to protect yourself from them. UV rays can be broken down into 5 main categories:

UV INDEX 0-2 Intensity very weak Level Icon

MI UV LO LO

CALIBRATING FUNCTION

TEMPERATURE

3-4 weak

5-6 average

7-9 strong

10+ very strong

In temperature mode: Press on S4 for 2 seconds: enter temperature calibration mode and the temperature will flash. Press on S1 or S2: increase/decrease the temperature value in relation to the reading of a reference instrument. Press on S4 at any time to exit calibration mode.
The sunlight measured is standardized according to the sensitivity of the skin to the various ultraviolet waves. The full spectrum is taken into account, but weighting coefficients are applied for the reactions to each wavelength. Visible light and unharmful wavelengths are disregarded by the sensor. Press on S1: activate/deactivate the UV alarm. If the UV index measured exceeds the value recorded as the limit, the watch rings for 30 seconds.

7 - UV index mode

S1: activate/deactivate the UV alarm S2: inactive S3: switch to next mode S4: quick press: electroluminescence long press: enter setting mode

SETTING THE UV ALARM

Press on S4 for 2 seconds: enter UV alarm setting mode and the value will flash. Press on S1 or S2: increase/decrease the limit value
of the UV index. Press on S4 at any time to exit setting mode.

CONTACT

As we strive to continually improve the products we develop, we are interested in your feedback regarding the quality, the functionality and the usage of our products. - In France, please call the customer service center at: Azure no. (local call rate) - For any other country, please leave a message under the relevant heading on our website: www.decathlon.com We promise to answer you promptly.