Gigabyte GA-6VX7-4x-AP Manual
Here you can find all about Gigabyte GA-6VX7-4x-AP like manual and other informations. For example: review.
Gigabyte GA-6VX7-4x-AP manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Gigabyte GA-6VX7-4x-AP please write about it to help other people. [ Report abuse or wrong photo | Share your Gigabyte GA-6VX7-4x-AP photo ]
User reviews and opinions
|K. Castania||8:24pm on Saturday, September 4th, 2010|
|My Company uses Citrix, so I am able to run Windows Applications, SAP, even flash and all my GO TO corporate applications on the device. Does this device have any real flaws? Lets address some real shortcomingsÂ of the iPad. you will love the 9 inches screen. You will enjoy the touchscreen experience with iPad Fast, Lightweight, Compact|
|p3ngu!n||7:41am on Sunday, June 27th, 2010|
|Overpriced content consumption table. Very responsive touch screen, high res screen Content Consumption only. Not great value for money. No camera.|
|Kibastoc7||1:55pm on Thursday, May 27th, 2010|
|I have had this for 3 weeks now and use it for home and work. Wireless works great. App selection is fantastic.|
|Onno Benschop||10:40pm on Tuesday, April 27th, 2010|
|PROS: OS, look, Awesomeness ITs great, and the idea is well along with the OS its a Mac downsized. its size is a bit big Bought the 16G WiFi for my wife. She enjoys playing games, surfing the web, reading books, reading email and catching up on her Soaps at ABC.com. Awesome game player, and has replaced my laptop but I do not have to need for business and so I do not know about how those work. Great for traveling,...|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
FCC Compliance Statement: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this Eric Lu equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: G.B.T. INC. Address: 18305 Valley Blvd., Suite#A LA Puent, CA 91744 Phone/Fax No: (818) 854- 9338/ (818) 854-9339 hereby declare s that the product Product Name: Mother Board Model Number: GA 6VX7-4X Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device Supplementary Information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful and (2) this device must accept any inference received, including that may cause undesired operation. ERIC LU Representative Person's Name: Signature: Date: Jan. 14, 2000
-Reorient or relocate the receiving antenna -Move the equipment away from the receiver -Plug the equipment into an outlet on a circuit different from that to which the receiver is connected -Consult the dealer or an experienced radio/television technician for additional suggestions You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void Your authority to operate such equipment. This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity
We, Manufacturer/Importer (full address) G.B.T. Technology Trding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-6VX7-4X is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM high frequency equipment EN55013 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment Limits and methods of measurement of radio disturbance characteristics of household electrical appliances, portable tools and similar electrical apparatus Limits and methods of measurement of radio disturbance characteristics of fluorescent lamps and luminaries Immunity from radio interference of broadcast receivers and associated equipment Limits and methods of measurement of radio disturbance characteristics of information technology equipment EN 61000-3-2* EN60555-2 Disturbances in supply systems caused by household appliances and similar electrical equipment Harmonics
Disturbances in supply systems caused by household appliances and similar electrical equipment Voltage fluctuations
Generic emission standard Part 1: Residual, commercial and light industry Generic immunity standard Part 1: Residual, commercial and light industry Generic emission standard Part 2: Industrial environment
Generic immunity standard Part 2: Industrial environment
Immunity requirements for household appliances tools and similar apparatus
DIN VDE 0855 Cabled distribution sys tems; Equipment part 10 for receiving and/or distribution from part 12 sound and television signals
EN 50091- 2
EMC requirements for uninterruptible power systems (UPS)
(EC conformity marking) The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 73/23 EEC
Safety requirements for mains operated electronic and related apparatus for household and similar general use Safety of household and similar electrical appliances
Safety for information technology equipment including electrical business equipment
General and Safety requirements for uninterruptible power systems (UPS)
Date: Jan.14, 2000
Socket 370 Processor Motherboard
Socket 370 Processor Motherboard REV. 1.2 First Edition
How This Manual Is Organized
This manual is divided into the following sections: 1) Revision History 2) Item Checklist 3) Features 4) Hardware Setup 5) Performance & Block Diagram 6) Suspend to RAM 7) BIOS Setup 8) Appendix Manual revision information Product item list Product information & specification Instructions on setting up the motherboard Product performance & block diagram Instructions STR installation Instructions on setting up the BIOS software General reference
Table Of Content
Revision History Item Checklist Summary of Features 6VX7-4X Motherboard Layout Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition Performance List Block Diagram Suspend to RAM Installation Memory Installation Page Index for BIOS Setup Appendix P.1 P.2 P.3 P.5 P.6 P.32 P.33 P.34 P.40 P.41 P.74
Revision 1.2 Revision Note Initial release of the 6VX7-4X motherboard users manual. Date Jan.2000
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners.
Jan. 10, 2000 Taipei, Taiwan, R.O.C 1
The 6VX7-4X motherboard Cable for IDE / floppy device Diskettes or CD (TUCD) for motherboard driver & utility oInternal COMB Cable (Optional) oInternal USB Cable (Optional) oCable for SCSI device 6VX7-4X users manual
Summary Of Features
Page P.7 P.15 P.15 P.15 P.16 P.16 P.17 P.17 P.18 P.18 P.19 P.19 P.20 P.20 P.21 P.21 P.22 P.22 P.23 P.23 P.24 P.24 P.25 P.25 P.26 P.26 P.27 P.27 P.28 P.28 P.29 P.29 P.30 P.30 P.31 P.31
CPU Speed Setup
The system bus speed is selectable at 66,100,133MHz and Auto. The user can select the system bus speed (SW1) and change the DIP switch (SW2) selection to set up the CPU speed for 300 - 733MHz processor. SW1:
OFF O : ON, X :
CPU Auto 150
PCI CLK 33.3 33.3 37.5 41.6 33.3 220.127.116.11
1 X O O O O O X X X X
2 X O O O X X X X X X
3 X X O X X O X X O O
4 X X X O X X O X O X
5 O X X X X X X X X X
6 O X X X X X X X X X
M The CPU speed must match with the frequency RATIO. It will cause system
hanging up if the frequency RATIO is higher than that of CPU. SW2:
FREQ. RATIO X3 X 3.5 X4 X 4.5 X5 X 5.5 X6 X 6.5 X7 X 7.5 X8 X 8.5
O X O X O X O X O X O X
X X O O X X O O X X O O
O O X X X X O O O O X X
O O O O O O X X X X X X
X9 X 9.5
F For Auto Jumper setting:
Note: 1. If you use 66, 100, 133 MHz CPU, we recommend you to set up your system speed to Auto value. 2. We dont recommend you to set up your system speed to 112, 124, 142,152 MHz because these frequencies are not the standard specifications for CPU, Chipset and most of the peripherals. Whether your system can run under 112, 124, 142,152 MHz properly will depend on your hardware configurations: CPU, SDRAM, Cards, etc.
Celeron 300A / 66MHz FSB
Celeron 333 / 66MHz FSB
Celeron 366 / 66MHz FSB
Celeron 400 / 66MHz FSB
Celeron 433 / 66MHz FSB
CeleronTM 466 / 66 MHz FSB
ON SW1 ON SW1
CeleronTM 500 / 66 MHz FSB
CeleronTM 533 / 66 MHz FSB
ON 4 SW2
CeleronTM 566 / 66 MHz FSB
Cyrix 300 / 100 MHz FSB (Optional)
ON 3 SW2
Coppermine 500 / 100MHz FSB
Coppermine 550 / 100MHz FSB
Coppermine 600 / 100MHz FSB
Coppermine 650 / 100MHz FSB
Coppermine 700 / 100MHz FSB
Coppermine 533 / 133MHz FSB
Coppermine 600 / 133MHz FSB
Coppermine 667 / 133MHz FSB
Coppermine 733 / 133MHz FSB
Game & Audio Port
GAME Port Line Out MIC In Line In
COM A / COM B / LPT Port
USB & LAN Connector (LAN is optional)
1 Green LED (LAN Link LED) 2 Yellow LED (LAN Active LED)
Pin No. 7 8
Definition USB V0 USB D0USB D0+ GND USB V1 USB D1USB D1+ GND
PS/2 Keyboard & PS/2 Mouse Connector
PS/2 Keyboard PS/2 Mouse/ Keyboard Pin No. Definition 1 Data 2 NC 3 GND 4 VCC(+5V) 5 Clock 6 NC
JP16: CPU Cooling Fan Power Connector
1 Pin No. Definition 1 GND 2 +12V 3 SENSE
JP15: Power Cooling Fan Power Connector
1 Pin No. Definition 1 GND 2 +12V 3 NC
JP2: System Cooling Fan Power Connector
Pin No. Definition 3,5,7,13,15-17 GND 1,2,11 3.3V 4,6,19,20 VCC 10 +12V 12 -12V 18 -5V 8 Power Good 9 5V SB stand by+5V 14 PS-ON(Soft On/Off)
USB 2 Connector
Definition VCC USB D0USB D0+ GND VCC USB D1USB D1+ GND
PIN No. Definition 1 VCC(+5V) 2 NC 3 IR data input 4 GND 5 IR data output
IDE1 (Primary), IDE2(Secondary) Port
IDE 1 IDE 2
J3: Ring Power On (Internal Modem Card Wake Up)
Pin No. 1 2
Definition Signal GND
J1: Wake On LAN
Pin No. Definition 1 +5V SB 2 GND 3 Signal
J7: TEL: The connector is for Modem with internal voice connector
Pin No. Definition 1 Signal-In 2 GND 3 GND 4 Signal-Out
Pin No. 3 4
Definition AUX-L GND GND AUX-R
J8: CD Audio Line In
Definition CD-L GND GND CD-R
JP5: STR LED Connector & LED1: DIMM LED
STR LED Connector External
Front USB Port (Optional)
Pin No. 1,4,5,3,7,1 Definition NC +5V GND USBP0+ USBP0-
J11: SM BUS
Pin No. 5
Definition SMB CLK NC GND SMB DATA +5V
Panel And Jumper Definition
J2: For 2X11 Pins Jumper
GN P+ P P HD
GN (Green Switch) GD (Green LED) HD (IDE Hard Disk Active LED) SPKR (Speaker Connector) RE (Reset Switch) P+PP(Power LED) PW (Soft Power Connector)
Open: Normal Operation Close: Entering Green Mode Pin 1: LED anode(+) Pin 2: LED cathode() Pin 1: LED anode(+) Pin 2: LED cathode() Pin 1: VCC(+) Pin 2- Pin 3: NC Pin 4: Data() Open: Normal Operation Close: Reset Hardware System Pin 1: LED anode(+) Pin 2: LED cathode() Pin 3: LED cathode() Open: Normal Operation Close: Power On/Off
The Main Menu
Once you enter AMI BIOS CMOS Setup Utility, the Main Menu (Figure 1) will appear on the screen. The Main Menu allows you to select from nine setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
AMIBIOS SIMPLE SETUP UTILITY -VERSION 1.20 ( C ) 1998 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP/PCI CONFIGURATION LOAD BIOS DEFAULTS LOAD SETUP DEFAULTS INTEGRATED PERIPHERALS HARDWARE MONITOR SETUP SUPERVISOR PASSWORD USER PASSWORD IDE HDD AUTO DETECTION SAVE & EXIT SETUP EXIT WITHOUT SAVING
ESC : Quit : Select Item (Shift) F2 : Change Color F5 : Old Values F6 : Load BIOS Defaults F7: Load Setup Defaults F10: Save & Exit Time, Date, Hard Disk Type,
Figure 1: Main Menu
Standard CMOS Setup
This setup page includes all the items in standard compatible BIOS.
BIOS Features Setup
This setup page includes all the items of AMI special enhanced features.
Chipset Features Setup
This setup page includes all the items of chipset special features.
Power Management Setup
This setup page includes all the items of Green function features.
This setup page includes all the configurations of PCI & PnP ISA resources.
Load BIOS Defaults
Bios Defaults indicates the value of the system parameter which the system would be in the safe configuration.
Load Setup Defaults
Setup Defaults indicates the value of the system parameter which the system would be in the most appropriate configuration.
This setup page includes all onboard peripherals.
Hardware Monitor Setup
This setup page is auto detect fan and temperature status.
Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup.
Change, set, or disable password. It allows you to limit access to the system.
IDE HDD auto detection
Automatically configure hard disk parameters.
Save & Exit Setup
Save CMOS value settings to CMOS and exit setup.
Exit Without Saving
Abandon all CMOS value changes and exit setup.
Standard CMOS Setup
The items in Standard CMOS Features Menu (Figure 2) are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item.
AMIBIOS SETUP STANDARD CMOS SETUP ( C ) 1998 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Web Oct 27, 1999 Time (hh/mm/ss) : 10:36:24 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Pri Master : Auto Pri Slave : Auto Sec Master : Auto Sec Slave : Auto Floppy Drive A: 1.44 MB 3 Floppy Driver B: Not Installed Boot Sector Virus Protection : Disabled Month: Jan Dec Day: Y ear : 1980 2099
Base Memory : 640 Kb Other Memory: 384 Kb Extended Memory: 30Mb Total Memory: 31Mb ESC : Exit : Select Item PU/PD/+/ : Modify (Shift)F2 : Color
Figure 2: Standard CMOS Setup
The date format is <Week>, <Month>, <Day>, <Year>. Week Month Day Year The week, from Sun to Sat, determined by the BIOS and is display -only The month, Jan. Through Dec. The day, from 1 to 31 (or the maximum allowed in the month) The year, from 1980 through 2099
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.
IDE Primary Master, Slave / Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and user definable type. User type is user-definable; Auto type which will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer. CYLS. Number of cylinders HEADS number of heads PRECOMP write precomp LANDZONE Landing zone SECTORS number of sectors If a hard disk has not been installed select NONE and press <Enter>.
Drive A type / Drive B type
The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. None 360K, 5.25 in. 1.2M, 5.25 in. 720K, 3.5 in. 1.44M, 3.5 in. 2.88M, 3.5 in. No floppy drive installed 5.25 inch PC-type standard drive; 360K byte capacity. 5.25 inch AT-type high-density drive; 1.2M byte capacity (3.5 inch when 3 Mode is Enabled). 3.5 inch double-sided drive; 720K byte capacity 3.5 inch double-sided drive; 1.44M byte capacity. 3.5 inch double-sided drive; 2.88M byte capacity.
Boot Sector Virus Protection
Try Other Boot Device
Yes No Enabled other device to boot system. (Default Value) Disabled other device to boot system.
Floppy Access Control
Read-Write Read-Only Set Floppy Access Control : Read-Write. (Default Value) Set Floppy Access Control : Read Only.
Hard Disk Access Control
Read-Write Read-Only Set Hard Disk Access Control : Read-Write. (Default Value) Set Hard Disk Access Control : Read Only.
S.M.A.R.T. for Hard Disks
Enable Disable Enable S.M.A.R.T. Hard for Disks. Disable S.M.A.R.T. Hard for Disks. (Default Value)
Boot Up Num-Lock
On Off Keypad is number keys. (Default Value) Keypad is arrow keys.
Floppy Drive Swap
Enabled Disabled Floppy A & B will be swapped under DOS. Floppy A & B will be normal definition. (Default Value)
Floppy Drive Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks. 360 type is 40 tracks while 720 , 1.2 and 1.44 are all 80 tracks. Enabled Disabled BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks. Note that BIOS can not tell from 720, 1.2 or 1.44 drive type as they are all 80 tracks. BIOS will not search for the type of floppy disk drive by track number. Note that there will not be any warning message if the drive installed is 360. (Default Value)
Setup Always Set Password Check to Setup. (Default Value) Set Password Check to Always.
Boot To OS/2 > 64MB
Yes No Enabled Boot To OS/2. Disabled Boot To OS/2. (Default Value)
CPU Serial Number
Disabled Enabled Disabled CPU Serial Number. (Default Value) Enabled CPU Serial Number.
L1 /L2 Cache
WriteBack Disabled Set L1 Cache is WriteBack. (Default Value) Disabled this Function.
Cache Bus ECC
Enabled Disabled Enable Cache Bus ECC. Disable Cache Bus ECC. (Default Value)
System BIOS Cacheable
Enabled Disabled Enabled System BIOS Cacheable. (Default Value) Disabled System BIOS Cacheable.
C000 32K Shadow- DC00 16K Shadow
These categories determine whether optional ROM will be copied to RAM by 16 byte. Enabled Disabled Cached Optional shadow is enabled. Optional shadow is disabled. Optional shadow is cached.
Chipset Features Setup
AMIBIOS SETUP CHIPSET FEATURE CMOS SETUP ( C ) 1998 American Megatrends, Inc. All Rights Reserved *** DRAM Timing *** PCI Dynamic Bursting :Enabled SDRAM Timing by SPD :Disabled PCI Master 0 W/S Write :Enabled DRAM Frequency :100Mhz PCI Delay Transaction :Disabled Bank 0/1 DRAM Timing :Normal AGP Master 1 W/S Write :Disabled Bank 2/3 DRAM Timing :Normal AGP Master 1 W/S Read :Disabled Bank 4/5 DRAM Timing :Normal ISA Bus Clock :PCICLK/4 SDRAM CAS# Latency :3 VGA Frame Buffer USWC :Disabled PCI Frame Buffer USWC :Disabled C2P Concurrency & Master :Enabled ClkGen Spread Spectrum :Enabled DRAM Integrity Mode :Disabled ClkGen for DIMM Slot :Enabled Memory Hole :Disabled USB Controller :USB Port 0&1 AGP Mode :4X USB Legacy Support :Disabled AGP Comp. Driving :Auto Manual AGP Comp. Driving :CB AGP Aperture Size :64MB Peer Concurrency :Disabled ESC : Quit : Select Item Delay Transaction :Disabled F1 : Help PU/PD/+/ - : Modify PCI Master Access PMRDY :Enabled F5 : Old Values (Shift)F2 :Color PCI Read Caching :Disabled F6 : Load BIOS Defaults
Figure 5: Power Management Setup
ESC F1 F5 F6
: Quit : Select Item : Help PU/PD/+/ - : Modify : Old Values (Shift)F2 :Color : Load BIOS Defaults
ACPI Sleep type
S1/POS S3/STR Set ACPI Sleep type is S1 (Default Value) Set ACPI Sleep type is S3.
USB KB Wakeup From S3~S5
Enabled Disabled Enable USB Keyboard Wakeup from system. Disable USB Keyboard Wakeup from system. (Default Value)
Power Management / APM
Enabled Disabled Enable Green & software APM function. (Default Value) Disable Green & software APM function.
Video Power Down Mode
Disabled Suspend Stand By Disabled Video Power Down Mode Function. Set Video Power Down Mode to Suspend. (Default Value) Set Video Power Down Mode to Stand By.
Hard Disk Power Down Mode
Disabled Suspend Stand By Disabled Hard Disk Power Down Mode Function. Set Hard Disk Power Down Mode to Suspend (Default Value) Set Hard Disk Power Down Mode to Stand By.
Standby Time Out (Minute.)
Disabled Disabled Standby Time Out Function. (Default Value) Enabled Standby Time Out after 1min. Enabled Standby Time Out after 2min. Enabled Standby Time Out after 4min. Enabled Standby Time Out after 8min. Enabled Standby Time Out after 10min. Enabled Standby Time Out after 20min. Enabled Standby Time Out after 30min. Enabled Standby Time Out after 40min. Enabled Standby Time Out after 50min. Enabled Standby Time Out after 60min.
Suspend Time Out (Minute.)
Disabled Disabled Suspend Time Out Function. (Default Value) Enabled Suspend Time Out after 1min. Enabled Suspend Time Out after 2min. Enabled Suspend Time Out after 4min. Enabled Suspend Time Out after 8min. Enabled Suspend Time Out after 10min. Enabled Suspend Time Out after 20min. Enabled Suspend Time Out after 30min. Enabled Suspend Time Out after 40min. Enabled Suspend Time Out after 50min. Enabled Suspend Time Out after 60min.
Ignore Monitor Ignore Display Activity. (Default Value) Monitor Display Activity.
Ignore Monitor Ignore IRQ3 ~IRQ15. Monitor IRQ3~IRQ15.
Ignore Monitor Ignore System Thermal. (Default Value) Monitor System Thermal.
Soft-off by Power Button
Instant off Delay -4Sec Soft switch ON/OFF for Power Button. (Default Value) Soft switch ON 4 Sec for Power off.
Figure 9: Integrated Peripherals
Disabled Both Primary Secondary Disabled OnBoard IDE Set OnBoard IDE is Both. (Default Value) Set OnBoard IDE is Primary. Set OnBoard IDE is Secondary.
Auto Disabled Enabled Set OnBoard FDC is Auto. (Default Value) Disabled OnBoard FDC. Enabled OnBoard FDC.
OnBoard Serial Port 1
Auto 3F8/COM1 2F8/COM2 3E8/COM3 2E8/COM4 Disabled BIOS will automatically setup the port 1 address. (Default Value) Enable onBoard Serial port 1 and address is 3F8. Enable onBoard Serial port 1 and address is 2F8. Enable onBoard Serial port 1 and address is 3E8. Enable onBoard Serial port 1 and address is 2E8. Disable onBoard Serial port 1.
OnBoard Serial Port 2
Auto 3F8/COM1 2F8/COM2 3E8/COM3 2E8/COM4 Disabled BIOS will automatically setup the port 2 address. (Default Value) Enable onBoard Serial port 2 and address is 3F8. Enable onBoard Serial port 2 and address is 2F8. Enable onBoard Serial port 2 and address is 3E8. Enable onBoard Serial port 2 and address is 2E8. Disable onBoard Serial port 2.
Serial Port 2 Mode
(This item allows you to determine which Serial Port 2 Mode of onboard I/O chip) ASKIR Set onboard I/O chip Serial Port 2 to ASKIR Mode. IrDA Set onboard I/O chip Serial Port 2 to IrDA Mode. Normal Set onboard I/O chip Serial Port 2 to Normal Mode. (Default Value)
Half Duplex N/A Full Duplex IR Function Duplex Half. Disabled this function. (Default Value) IR Function Duplex Full.
On Board Parallel port
3BC Auto Disabled Enable On Board LPT port and address is 378. Enable On Board LPT port and address is 278. Enable On Board LPT port and address is 3BC. Set On Board LPT port is Auto. (Default Value) Disable On Board LPT port.
Parallel Port Mode
EPP ECP Normal Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. (Default Value) Normal Operation.
Parallel Port DMA
Auto 0 Set Auto to parallel port mode DMA Channel. (Default Value) Set Parallel Port DMA is 3. Set Parallel Port DMA is 1. Set Parallel Port DMA is 0.
Parallel Port IRQ
7 Auto 5 Set Parallel Port IRQ is 7. Set Auto to parallel Port IRQ DMA Channel. (Default Value) Set Parallel Port IRQ is 5.
OnBoard AC97 Audio
Auto Disabled Set AC97 Audio to Auto. (Default Value) Disabled AC97 Audio.
OnBorard AC97 Modem
Auto Disabled Set AC97 Modem to Auto. (Default Value) Disabled AC97 Modem.
OnBorard Legacy Audio
Enabled Disabled Enabled OnBoard Legacy Audio. (Default Value) Disabled OnBoard Legacy Audio.
Enabled Disabled Enabled Sound Blaster. (Default Value) Disabled Sound Blaster.
SB I/O Base Address
220h-22Fh 280h-28Fh 260h-26Fh 240h-24Fh Set SB I/O Base Address is 220h-22Fh. (Default Value) Set SB I/O Base Address is 280h-28Fh. Set SB I/O Base Address is 260h-26Fh. Set SB I/O Base Address is 240h-24Fh.
SB IRQ Select
IRQ 9 / 5 / 7/ 10. (Default Value: 5 )
SB DMA Select
DMA 0 / 1 / 2/ 3. (Default Value: 1 )
Enabled Disabled Enabled MPU-401. (Default Value) Disabled MPU-401.
MUP-401 I/O Address
330h-333h 300h-303h 310h-313h 320h-323h Set MUP-401 I/O Address is 330h-333h. (Default Value) Set MUP-401 I/O Address is 300h-303h. Set MUP-401 I/O Address is 310h-313h. Set MUP-401 I/O Address is 320h-323h.
FM Port (388h-38Bh)
Disabled Enabled Disabled FM Port (388h-38Bh). Enabled FM Port (388h-38Bh). (Default Value)
Game Port (200h-207h)
Disabled Enabled Disabled Game Port (200h-207h). Enabled Game Port (200h-207h). (Default Value)
AMIBIOS SETUP HARDWARE MONITOR ( C ) 1998 American Megatrends, Inc. All Rights Reserved ACPI Shut Down Temperature Current CPU Temp. Current System Temp. Case Status Current CPU Fan Speed Current System Fan Speed Vcore +3.300V +5.000V +12.000V :65C/149F :36C/96F :28C/82F Closed :5487 RPM :0 RPM :2.075V :3.590V :5.119V :11.926V
Figure 10: Hardware Monitor
ACPI Shutdown Temp. (C / F)
(This function will be effective only for the operating systems that support ACPI Function.) Disabled 60C / 140F 65C / 149F 70C / 158F 75C / 167F Disable ACPI Shutdown function. Monitor CPU Temp. at 60C / 140F, if Temp. > 60C / 140F system will automatically power off. Monitor CPU Temp. at 65C / 149F, if Temp. > 65C / 149F system will automatically power off. (Default Value) Monitor CPU Temp. at 70C / 158F, if Temp. > 70C / 158F system will automatically power off. Monitor CPU Temp. at 75C / 167F, if Temp. > 75C / 167F system will automatically power off.
Current CPU Temp. (C / F)
Detect CPU Temperature automatically.
Current System Tem. (C / F)
Detect System Temperature automatically.
If the case is closed, Case Status will show Closed. If the case have been opened, Case Opened will show Open.
Current CPU FAN Speed
Detect CPU Fan speed status automatically.
Current System FAN Speed
Detect System Fan speed status automatically.
Current Voltage (V) VCORE / +3.3V / +12V / +5V
Detect systems voltage status automatically.
Set Supervisor / User Password
When you select this function, the following message will appear at the center of the screen to assist you
Enter newSAVE & EXIT SETUP supervisor password:
EXIT WITHOUT SAVING
ESC : Quit : Select Item (Shift) F2 : Change Color F5 : Old Values F6 : Load BIOS Defaults F7: Load Setup Defaults F10: Save & Exit Chang /Set /Disabled Password
in creating a password. Figure 11: Password Setting Type the password, up to eight characters, and press <Enter>. The password typed now will clear the previously entered password from CMOS memory. You will be asked to confirm the password. Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not enter a password. To disable password, just press <Enter> when you are prompted to enter password. A message PASSWORD DISABLED will appear to confirm the password being disabled. Once the password is disabled, the system will boot and you can enter Setup freely. If you select always at Password Check Option in BIOS Features Setup Menu, you will be prompted for the password every time the system is rebooted or any time you try to enter Setup Menu. If you select Setup at Password Check Option in BIOS Features Setup Menu, you will be prompted only when you try to enter Setup.
IDE HDD AUTO Detection
AMIBIOS SETUP STANDARD CMOS SETUP ( C ) 1998 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Fri Dec 25, 1998 Time (hh/mm/ss) : 10:36:24 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Pri Master : Not Installed Pri Slave : Not Installed Sec Master : Not Installed Sec Slave : Not Installed Floppy Drive A: 1.44 MB 3 Floppy Driver B: Not Installed Boot Sector Virus Protection : Disabled Month: Jan Dec Day: Year : Base Memory : 640 Kb Other Memory: 384 Kb Extended Memory: 31Mb Total Memory: 32Mb ESC : Exit : Select Item PU/PD/+/ : Modify (Shift)F2 : Color
Figure 12: IDE HDD Auto Detection Type "Y" will accept the H.D.D. parameter reported by BIOS. Type "N" will keep the old H.D.D. parameter setup. If the hard disk cylinder number is over 1024, then the user can select LBA mode or LARGER mode for DOS partition larger than 528 MB.
Save & Exit Setup
SAVE to CMOS and EXIT(Y/N)? Y
ESC : Quit : Select Item (Shift) F2 : Change Color F5 : Old Values F6 : Load BIOS Defaults F7: Load Setup Defaults F10: Save & Exit Save Data to CMOS & Exit Setup
Figure 13: Save & Exit Setup Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS. Type "N" will return to Setup Utility.
Exit Without Saving
AMIBIOS SIMPLE SETUP UTILITY -VERSION 1.20 ( C ) 1998 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP/PCI CONFIGURATION INTEGRATED PERIPHERALS HARDWARE MONITOR SETUP SUPERVISOR PASSWORD USER PASSWORD IDE HDD AUTO DETECTION
Quit without saving (Y/N) ? N LOAD BIOS DEFAULTS SAVE & EXIT SETUP
LOAD SETUP DEFAULTS EXIT WITHOUT SAVING
ESC : Quit : Select Item (Shift) F2 : Change Color F5 : Old Values F6 : Load BIOS Defaults F7: Load Setup Defaults F10: Save & Exit Abandon all Datas & Exit Setup
Figure 14: Exit Without Saving Type "Y" will quit the Setup Utility without saving to RTC CMOS. Type "N" will return to Setup Utility.
Appendix A: VIA Series VT82C686A Chipsets Driver Installation A. VIA 4 in 1 Service Pack Utility:
Insert the support CD that came with your motherboard into your CD-ROM driver or double click the CD driver icon in My Computer to bring up the screen.
1.Click VT82C686A item.
2.Click VIA 4 in 1 service Pack Utility item.
9.Click Finish to restart.
B. Hardware Monitor:
2.Click Hardware Monitor item.
5.Click Next to Finish.
Appendix B: BIOS Flash Procedure
BIOS update procedure: Please check your BIOS vendor (AMI or AWARD) on the motherboard. It is recommended you copy the AWDFlash.exe or AMIFlash.exe in driver CD (D:\>Utility \BIOSFlash) and the BIOS binary files into the directory you made in your hard disk. i.e:C:\>Utility \ (C:\>Utility : denotes the driver and the directory where you put the flash utilities and BIOS file in.) Restart your computer into MS-DOS mode or command prompt only for Win95/98, go into the directory where the new BIOS file are located use the utility AWDFlash.exe or AMIFlash.exe to update the BIOS. Type the following command once you have enter the directory where all the files are located C:\utility \ AWDFlash or AMIFlash <filename of the BIOS binary file intended for flashing>. Once the process is finished, reboot the system.
ECP2240 CA280 Nuvi 1370 Premacy DC728KA 260 WX Digtal AVH-P4250dvd-avh-p3250dvd-avh-p3250BT Omnia I908 LE32R87BD MPA-II Speed-modem 200 HK 3380 Dimage E50 ETX-60-70AT MEX-BT2500 CTY 105 GT-S5233W Review Coolpix P60 Edition KV-25ST12 Focusing Ring EX-Z60DX T55600 Zoom R24 Acoustasonic PRO Yzea 500 DVD-R130S Samsung B300 PCG-K415S - 2001 1040 FAX Quad FM3 Classe A 220-420LTO GT122D KV-32LS35B Compact 330 WF-T8510TC Canon S450 SX-636 WDJ1294 RMX 850 AF-1 N DSC-W370 Lecoaspira 715 Lgdvt418 M5 2000 AP120NPO HP 9G FJR1300-2004 WD-N80062 LS-1000 FOR AAA Ultimate 30BF IA120 DTH311 SC-PM45 LCD1810 WS-32Z308P ZWN2106 Asus A7VM CR-FOX CI DX7630 Scratch WD-14311RDK DLE7177WM Nikkor Scanjet 4850 KCA-420I-i-pod-space-interface VT660 37AM-23H VR9261 XA 4000 MX882 Syracuse MP35 Dvdr3480 MAX-C550 Digitech RP5 KM-8030 707SI Dect 627 LC4 2003 Smartphones LN32S81BD XVN332SUS-xv-n332 Tara 205 Clash Pads KD-S550 MHC-RG11 Express DVR-SK12D MD130 Grandprix 2004 Temporis 700 DVP-S530D CDX-L490B SGH-D830 Psr-320 SA-HE9
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101