Gigabyte GA-7ZX-1 Manual
Here you can find all about Gigabyte GA-7ZX-1 like manual and other informations. For example: review.
Gigabyte GA-7ZX-1 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Gigabyte GA-7ZX-1 please write about it to help other people. [ Report abuse or wrong photo | Share your Gigabyte GA-7ZX-1 photo ]
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Product Information for SKU:
Socket A GA-7ZX - Mainboard - ATX - 0 / 1 x Athlon, Duron Gigabyte is an international motherboards expert. Dedicated in customer service and high technology, Gigabyte has already earned a reputation for quality worldwide. With a long history of commitment in the computer product design and production, and a team of highly skilled engineers in the motherboard nowadays, Gigabyte positions itself as the standard setter of price and performance in the manufacturing and marketing of motherboards.
Supported RAM Technology Memory / RAM Memory / Cache Data Bus Speed Max Mainboard Communications Audio Output Video Output Networking Processor Storage Controller (2nd) Storage Controller Dimensions (WxDxH) Form Factor Warranty SDRAM, VCM SDRAM 0 MB ( 1.5 GB ) - SDRAM DIMM 168-PIN - 133 MHz None 133 MHz VIA Apollo KT133 Sound card - 16-Bit 48 KHz stereo None None 0 ( 1 ) - Athlon, Duron Floppy integrated DMA/ATA-66 (Ultra) - integrated 30.4 cm x 22.7 cm Desktop / deskside - ATX 1 year warranty
Telecom / Networking Networking Modem / Comm. Video Memory / Video Installed ( Max ) Video Output Audio Sound Output Mode Audio Output Processor Data Bus Speed Processor Installed ( Max ) Clock Speed Type / Form Factor Memory Supported RAM Technology Memory / RAM Installed ( Max ) Memory / Cache Installed ( Max ) Expansion / Connectivity Port(s) Total ( Free ) / Connector Type None None None None 16-Bit 48 KHz stereo Sound card - PCI - integrated AC 'MHz 0(1)
SDRAM, VCM SDRAM 0 MB ( 1.5 GB ) - SDRAM DIMM 168-PIN - 133 MHz None 2 ( 2 ) x storage DMA/ATA-66 (Ultra) / 40 PIN IDC male 1 ( 1 ) x storage floppy interface / 34 PIN IDC male 1 ( 1 ) x serial USB / 4 PIN USB Type A male
Expansion Slot(s) Total ( Free )
2 ( 2 ) x serial RS-232C / 9 PIN D-Sub (DB-9) male 1 ( 1 ) x parallel IEEE 1284 (EPP/ECP) / 25 PIN DSub (DB-25) female 1 ( 1 ) x keyboard generic / 6 PIN mini-DIN (PS/2 Style) female 1 ( 1 ) x mouse generic / 6 PIN mini-DIN (PS/2 Style) female 1 ( 1 ) x audio line-out / mini-phone stereo plug 3.5 mm female 1 ( 1 ) x audio line-In / mini-phone stereo plug 3.5 mm female 1 ( 1 ) x gameport / MIDI generic / 15 PIN D-Sub (DB-15) female 1 ( 1 ) x microphone input / mini-phone mono plug 3.5 mm female 1 ( 1 ) x serial generic / IrDA 1 ( 1 ) x AGP - full-size 5 ( 5 ) x PCI - full-size 3 ( 3 ) x memory - DIMM 168-PIN 1 ( 1 ) x processor Socket A 1 ( 1 ) x ISA - full-size None Floppy integrated IDE / EIDE integrated 1 year x limited warranty bring-In 1 year warranty Temperature: 0 C - Humidity: 0 - 85% Plug and Play Retail 22.7 cm 30.4 cm AMI VIA Apollo KTGHz Athlon, Duron Desktop / deskside ATX
Power Voltage Required Storage Controller Storage Controller (2nd) Storage Controller Warranty Service / Support Details Service / Support Miscellaneous Environmental Parameters Mounting Kit Compliant Standards Package Type General Depth Width BIOS Type Chipset Type Max Processor Speed Compatible Processors Form Factor Accessories Product Line: Product Line / Model: Parent SKU:
*NOTE: Every effort has been made to ensure the accuracy of all information contained herein.
Ingram Micro makes no warranty expressed or implied with respect to accuracy of the information, including price, product editorials or product specifications. Ingram Micro or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if Ingram Micro has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification.
7ZX-H Motherboard Layout
Socket A CPU
JP8 LED1 JP21 J15 JP7 FLOPPY SW1 PCI1 J13 JP3 J12 PCI4 JP10 J2 PCI5
MAIN BACK Up BIOS BIOS
VT8363A GAME & AUDIO
J18 IDE1 IDE2
BAT1 VT82C 686B
JP16 AMR JP18 ISA 1
JP17 BZ1 J11
Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition CPU Speed Setup Connectors Game & Audio Port COM A / COM B / LPT Port USB 1 Connector USB 2 Connector PS/2 Keyboard & PS/2 Mouse Connector J3 (CPU Fan) JP6 (Power Fan) J2 (System Fan) ATX Power Floppy Port IDE 1(Primary) / IDE 2(Secondary) Port J16 (TEL) J15 (AUX_IN) J18 (CD Audio Line In) J13 (Ring Power On) J12 (Wake On LAN) JP8 / LED1 (STR LED Connector & DIMM LED) J4 (IR) Panel and Jumper Definition J11 (2x11 Pins Jumper) JP16/JP17/JP18 (AMR Select)[Optional] JP4 (Rear USB Device Wake Up Selection) JP7 (STR Function Enable) JP11 (Front USB Device Wake Up Selection) JP10 (BIOS Write Protection)[Optional] JP3 (Clear CMOS Function)[Optional] BAT1 (Battery)
Page P.7 P.8 P.8 P.8 P.9 P.9 P.10 P.10 P.11 P.11 P.12 P.12 P.13 P.13 P.14 P.14 P.15 P.15 P.16 P.16 P.17 P.17 P.18 P.18 P.19 P.19 P.20 P.20 P.21
CPU Speed Setup
The system bus speed is selectable at 100~133MHz. The user can select the system bus speed by DIP switch SW1 & JP21. Set System Bus Speed SW1:
O: ON / X: OFF
1 O X 0
2 O X 0 X X 0 X 0 X
3 X X 0 X X X 0
4 X X X 0 X
JP21: CPU Clock Frequency (Optional)
Pin No. Definition 1-2 close 133MHz 2-3 close 100MHz (Default)
AMD CPU Heat Sink Installation: Beware: Please check that the heat sink is in good contact with the CPU before you turn on your system. The poor contact will cause over heat, and might cause damage to your processor.
Game & Audio Port
Line Out 1
MIC In Line In
COM A / COM B / LPT Port
USB 1 Connector
Pin No. 7 8
Definition USB V0 USB D0USB D0+ GND USB V1 USB D1USB D1+ GND
USB 2 Connector
Pin No. Definition +5V GND USB D2NC USB D2+ USB D3+ NC USB D3GND +5V
PS/2 Keyboard & PS/2 Mouse Connector
PS/2 Mouse/Keyboard Pin No. Definition 1 Data 2 NC 3 GND 4 VCC(+5V) 5 Clock PS/2 Keyboard 6 NC PS/2 Mouse
J3: CPU Fan
Pin No. Definition 1 Control 2 +12V 3 SENSE
JP6: Power Fan
1 Pin No. Definition 1 Control 2 +12V 3 NC
J2: Sysem Fan
Pin No. 3,5,7,13, 15-17 1,2,11 4,6,19,14 Definition GND 3.3V VCC +12V -12V -5V Power Good 5V SB (stand by+5V) PS-ON (Soft On/Off)
IDE1 (Primary), IDE2 (Secondary) Port
IDE 1 IDE 2
J16 TEL: The connector is for Modem with internal voice connector
1 Pin No. Definition 1 Signal-In 2 GND 3 GND 4 Signal-Out
1 Pin No. Definition AUX-L GND GND AUX-R
J18: CD Audio Line In
1 Pin No. Definition CD-L GND GND CD-R
J13: Ring Power On (Internal Modem Card Wake Up)
1 Pin No. Definition 1 Signal 2 GND
J12: Wake On LAN
Pin No. Definition 1 +5V SB 2 GND 3 Signal
JP8 / LED1: STR LED Connector & DIMM LED
STR LED Connector External. 1
1 Pin No. Definition 1 VCC (+5V) 2 NC 3 IR Data Input 4 GND 5 IR Data Output
Panel And Jumper Definition
J11: 2x11 Pins Jumper
GN (Green Switch) GD (Green LED) HD (IDE Hard Disk Active LED) SPK (Speaker Connector) RE (Reset Switch) P+PP(Power LED) PW (Soft Power Connector)
Open: Normal Operation Close: Entering Green Mode Pin 1: LED anode(+) Pin 2: LED cathode() Pin 1: LED anode(+) Pin 2: LED cathode() Pin 1: VCC(+) Pin 2- Pin 3: NC Pin 4: Data() Open: Normal Operation Close: Reset Hardware System Pin 1: LED anode(+) Pin 2: LED cathode() Pin 3: LED cathode() Open: Normal Operation Close: Power On/Off
Panel and Jumper Definition
JP16 /JP17/JP18: AMR (Primary or Secondary) Select (Optional)
(AMR Audio Modem Riser)
JP16 ON OFF ON
Onboard AC97 AMR (Primary) Onboard AC97+MR (Secondary) (Default)
JP17 1-2 3-4 1-2 3-4
JP18 1-2 3-4 1-2
JP4: Rear USB Device Wake up Selection (USB Connector
1 Pin No. Definition 1-2 Close Normal (Default) 2-3 Close USB Device Wake up
(If you want to use "USB Dev Wakeup From S3-S5" function, you have to set the BIOS setting "USB Dev Wakeup From S3-S5" enabled, and the jumper "JP4" enabled). *(Power on the computer and as soon as memory counting starts, press <Del>. You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP", then select "USB Dev Wakeup From S3-S5: Enabled". Remember to save the setting by pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)
JP7: STR Function Enable
1 Pin No. Open Close Definition Normal (Default) STR Enabled
JP11: Front USB Device Wake up Selection (USB Port
Pin No. Definition 1-2 close Normal (Default) Enabled Front USB Device 2-3 close Wake up
(If you want to use "USB Dev Wakeup From S3-S5" function, you have to set the BIOS setting "USB Dev Wakeup From S3-S5" enabled, and the jumper "JP11" enabled). *(Power on the computer and as soon as memory counting starts, press <Del>. You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP", then select "USB Dev Wakeup From S3-S5: Enabled". Remember to save the setting by pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)
JP10: BIOS Write Protection (Optional)
1 Pin No. Definition ON Write Protect Enable Write Protect Disable OFF (Default)
Please Set Jumper JP10 to OFF to enabled BIOS Write Function when you update new BIOS or new device
JP3: Clear CMOS Function (Optional)
Pin No. Definition 1-2 close Normal (Default) 2-3 close Clear CMOS
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions.
The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.)
CPU DRAM CACHE SIZE DISPLAY STORAGE O.S. DRIVER
AMD AlthonTM 1200MHz, AMD DuronTM 900MHz (128x1) MB SDRAM (Winbond W986408CH-75) 384 KB included in AlthonTM 192 KB included in DuronTM GA-GF2000 Onboard IDE (Quantum AS30000AT 30GB) Windows 2000 + SP1 + DirectX8 Display Driver at 1024 x 768 x 64k colors 75Hz. TUCD ver.1.7
Processor Winbench99 Business Disk Winmark 99 Hi-End Disk Winmark 99 Business Graphics Winmark 99 Hi-End Graphics Winmark 99 Winstone 2001 Business Winstone 2001
Content Creative Winstone 2001
AMD AlthonTM 1200MHz (100x12)
AMD DuronTM 900MHz (100x9)
Boot From : Main BIOS (Default), Backup BIOS Status 1: The user can set to boot from main BIOS or Backup BIOS. Auto Recovery : Enable(Default), Disable When one of the Main BIOS or Backup BIOS occurs checksum failure, the working BIOS will automatically recover the BIOS of checksum failure. (In the Power Management Setup of the BIOS Setting, if ACPI Suspend Type is set to Suspend to RAM, the Auto Recovery will be set to Enable automatically.) (If you want to enter the BIOS setting, please press Del key when the boot screen appears.) Halt On Error : Disable(Default), Enable If the BIOS occurs a checksum error or the Main BIOS occurs a WIDE RANGE PROTECTION error and Halt On BIOS Defects set to Enable, the PC will show messages on the boot screen, and the system will pause and wait for the users instruction. If Auto Recovery: Disable, it will show <or the other key to continue.> If Auto Recovery: Enable, it will show <or the other key to Auto Recover.> Copy Main ROM Data to Backup Backup message: Are you sure to copy BIOS? [Enter] to continue or [Esc] to abort The means that the Main BIOS works normally and could automatically recover the Backup BIOS. Or the means that the Backup BIOS works normally and could automatically recover the Main BIOS. (This auto recovery utility is set by system automatically and cant be changed by user.)
DualBIOSTM Technology FAQ
GIGABYTE Technology is pleased to introduce DualBIOS technology, a hot spare for your system BIOS. This newness Value-added feature, in a long series of innovations from GIGABYTE, is available on GA-7ZX-H motherboard. Future GIGABYTE motherboards will also incorporate this innovation.
On GIGABYTE motherboards with DualBIOS there are physically two BIOS chips. For simplicity well call one your Main BIOS and the other well call your Backup BIOS (your hot spare). If your Main BIOS fails, the Backup BIOS almost automatically takes over on your next system boot. Almost automatically and with virtually zero down time! Whether the problem is a failure in flashing your BIOS or a virus or a catastrophic failure of the Main BIOS chip, the result is the same - the Backup BIOS backs you up, almost automatically.
I. Q: What is DualBIOSTM technology? Answer:
DualBIOS technology is a patented technology from Giga-Byte Technology. The concept of this technology is based on the redundancy and fault tolerance theory. DualBIOSTM technology simply means there are two system BIOSes (ROM) integrated onto the motherboard. One is a main BIOS, and the other is a backup BIOS. The mainboard will operate normally with the main BIOS, however, if the main BIOS is corrupt or damaged for various reasons, the backup BIOS will be automatically used when the system powered-On. Your PC will operate as before the main BIOS was damaged, and is completely transparent to the user.
Gigabyte announces EasyTuneIII Windows overdrive utility
Overdrive might be one of the most common issues in computer field. But have many users ever tried it? The answer is probably no. Because overdrive is thought to be very difficult and includes a lot of technical know-how, sometimes overdrive is even considered as special skills found only in some enthusiasts.
But as to the experts in overdrive, whats the truth? They may spend quite a lot of time and money to study, try and use many different hardware and software tools to do overdrive. And even with these technologies, they still learn that its quite a risk because the safety and stability of an overdrive system is unknown. Now everything is different because of a Windows overdrive utility EasyTuneIII--announced by Gigabyte. This utility has totally changed the gaming rule of overdrive. This is the first overdrive utility suitable for both normal and power users. Users can choose either Easy Mode or Advanced Mode to run overdrive at their convenience. For users who choose Easy Mode, they just need to click Auto Optimize to have auto and immediate CPU overclocking. This software will then overdrive CPU speed automatically with the result being shown in the control panel. If someone prefers to overdrive by oneself, there is also another choice. Click Advanced Mode to enjoy sport drive class overclocking. In Advanced Mode, one can change the system bus speed in small increments to get ultimate system performance. And no matter which mainboard is used, if its a Gigabytes product*, EasyTuneIII helps to perform the best of system. Besides, different from other traditional over-clocking methods, EasyTuneIII doesnt require users to change neither BIOS nor hardware switch/ jumper setting; on the other hand, they can do overdrive at only one click. Therefore, this is a safer way for overdrive as nothing is changed on software or hardware. If user runs EasyTuneIII over systems limitation, the biggest lost is only to restart the computer again and the side effect is then well controlled. Moreover, if one well-performed system speed been tested in EasyTuneIII, user can Save this bus speed and Load it in next time. Obviously, Gigabyte EasyTuneIII has already turned the overdrive technology toward to a newer generation.
This wonderful software is now free bundled in Gigabyte motherboard attached driver CD. Users may make a test drive of EasyTuneIII to find out more amazing features by themselves. For further technical information, please link to: http://www.gigabyte.com.tw Note: For the latest version of EasyTuneIIITM, please visit our website.
The motherboard has 3 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot.The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets. Install memory in any combination table: DIMM DIMM 1 DIMM 2 DIMM 3 168-pin SDRAM DIMM Modules Supports 16 / 32 / 64 / 128 / 256 / 512 MB Supports 16 / 32 / 64 / 128 / 256 / 512 MB Supports 16 / 32 / 64 /128 / 256 / 512 MB X 1 pcs X 1 pcs X 1 pcs
Total System Memory (Max 1.5GB)
Page Index for BIOS Setup The Main Menu Standard CMOS Setup BIOS Features Setup Chipset Features Setup Power Management Setup PNP/ PCI Configuration Load BIOS Defaults Load Setup Defaults Integrated Peripherals Hardware Monitor & MISC Setup Supervisor Password / User Password IDE HDD Auto Detection Save & Exit Setup Exit Without Saving
Page P.43 P.45 P.48 P.50 P.54 P.57 P.60 P.61 P.62 P.66 P.68 P.69 P.70 P.71
BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
Power ON the computer and press <Del> immediately will allow you to enter Setup. If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" bottom on the system case. You may also restart by simultaneously press <Ctrl> <Alt> <Del> keys.
<> <> <> <> <Esc> Move to previous item Move to next item Move to the item in the left hand Move to the item in the right hand Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu Increase the numeric value or make changes Decrease the numeric value or make changes General help, only for Status Page Setup Menu and Option Page Setup Menu Reserved Reserved Reserved Restore the previous CMOS value from CMOS, only for Option Page Setup Menu Load the default CMOS value from BIOS default table, only for Option Page Setup Menu Load the Setup Defaults Reserved Reserved Save all the CMOS changes, only for Main Menu
<+/PgUp> <-/PgDn> <F1> <F2> <F3> <F4> <F5> <F6> <F7> <F8> <F9> <F10>
Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Esc>.
The Main Menu
Once you enter AMI BIOS CMOS Setup Utility, the Main Menu (Figure 1) will appear on the screen. The Main Menu allows you to select from nine setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24b ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP/PCI CONFIGURATION LOAD BIOS DEFAULTS LOAD SETUP DEFAULTS INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD IDE HDD AUTO DETECTION SAVE & EXIT SETUP EXIT WITHOUT SAVING
ESC : Quit : Select Item (Shift) F2 : Change Color F5 : Old Values F6 : Load BIOS Defaults F7: Load Setup Defaults F10: Save & Exit Time, Date, Hard Disk Type,
Figure 1: Main Menu
Standard CMOS Setup
This setup page includes all the items in standard compatible BIOS.
BIOS Features Setup
This setup page includes all the items of AMI special enhanced features.
Chipset Features Setup
This setup page includes all the items of chipset special features.
Power Management Setup
This setup page includes all the items of Green function features.
This setup page includes all the configurations of PCI & PnP ISA resources.
Load BIOS Defaults
Bios Defaults indicates the value of the system parameter which the system would be in the safe configuration.
Load Setup Defaults
Setup Defaults indicates the value of the system parameter which the system would be in the most appropriate configuration.
This setup page includes all onboard peripherals.
Hardware Monitor & MISC Setup
This setup page is auto detect fan and temperature status.
Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup.
Change, set, or disable password. It allows you to limit access to the system.
IDE HDD auto detection
Automatically configure hard disk parameters.
Save & Exit Setup
Save CMOS value settings to CMOS and exit setup.
Exit Without Saving
Abandon all CMOS value changes and exit setup.
Standard CMOS Setup
The items in Standard CMOS Features Menu (Figure 2) are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item.
AMIBIOS SETUP STANDARD CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Fri Mar 9, 2001 Time (hh/mm/ss) : 10:36:24 TYPE SIZE CYLS Pri Master : Pri Slave : Sec Master : Sec Slave : Auto Auto Auto Auto Base Memory : 640 Kb Other Memory: 384 Kb Extended Memory: 127Mb Total Memory: 128Mb ESC : Exit : Select Item PU/PD/+/ : Modify (Shift)F2 : Color
Floppy Drive A: 1.44 MB 3 Floppy Drive B: Not Installed Boot Sector Virus Protection : Disabled Month: Day: Year : Jan Dec 1990 2099
Figure 2: Standard CMOS Setup
The date format is <Week> <Month> <Day>, <Year>. Week Month Day Year The week, from Sun to Sat, determined by the BIOS and is display-only The month, Jan. Through Dec. The day, from 1 to 31 (or the maximum allowed in the month) The year, from 1990 through 2099
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.
Primary Master, Slave / Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and user definable type. User type is user-definable; Auto type which will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer. CYLS. Number of cylinders HEADS number of heads PRECOMP write precomp LANDZONE Landing zone SECTORS number of sectors If a hard disk has not been installed select NONE and press <Enter>.
S1/POS S3/STR Set ACPI sleep type to S1. (Default Value) Set ACPI sleep type to S3.
USB Dev Wakeup from S3-S5
Enabled Disabled Enable USB Dev Wakeup from S3-S5. Disable USB Dev Wakeup from S3-S5. (Default Value)
Suspend Time Out (Minute.)
Disabled Disable Suspend Time Out Function. (Default Value) Enable Suspend Time Out after 1min. Enable Suspend Time Out after 2min. Enable Suspend Time Out after 4min. Enable Suspend Time Out after 8min. Enable Suspend Time Out after 10min. Enable Suspend Time Out after 20min. Enable Suspend Time Out after 30min. Enable Suspend Time Out after 40min.
Enable Suspend Time Out after 50min. Enable Suspend Time Out after 60min.
Ignore Monitor Ignore Display Activity. (Default Value) Monitor Display Activity.
Ignore Monitor Ignore IRQ3 ~IRQ15. Monitor IRQ3~IRQ15.
Soft-off by Power Button
Instant-off Delay 4 sec The user press the power button once, he can turn off the system. (Default Value) Press power button 4 sec to Power off. Enter suspend if button is pressed less than 4 sec.
System after AC Back
Memory Soft-Off Full-On When AC-power back to the system, the system will return to the Last state before AC-power off. When AC-power back to the system, the system will be in Off state. (Default Value) When AC-power back to the system, the system will be in On state.
Modem USE IRQ
3, 4, (Default Value) 5, 7, N/A
Resume On Ring / LAN
Disabled Enabled Disable Resume On Ring / LAN. Enable Resume On Ring / LAN. (Default Value)
PME Event Wake Up
Disabled Enabled Disable PME Event Wake Up. Enable PME Event Wake Up. (Default Value)
Resume On RTC Alarm
You can set Resume On RTC Alarm item to enabled and key in Data/time to power on system. Disabled Enabled Disable this function. (Default Value) Enable alarm function to POWER ON system. Every Day, 1~31 0~23 0~59 0~59
If the Resume On RTC Alarm is Enabled. RTC Alarm Date: RTC Alarm Hour: RTC Alarm Minute: RTC Alarm Second:
AMIBIOS SETUP PNP / PCI CONFIGURATION ( C ) 1999 American Megatrends, Inc. All Rights Reserved PnP OS Installed No Reset Configuration Data No VGA Boot from AGP Disabled PCI AGP Palette Snoop Auto PCI Slot 1/5 IRQ Priority Auto PCI Slot 2 IRQ Priority Auto PCI Slot 3 IRQ Priority Auto PCI Slot 4 IRQ Priority IRQ 3 PCI/PnP IRQ 4 PCI/PnP IRQ 5 PCI/PnP IRQ 7 PCI/PnP IRQ 9 PCI/PnP IRQ 10 PCI/PnP ESC: Quit : Select Item IRQ 11 PCI/PnP F1 : Help PU/PD+/-/ : Modify IRQ 14 PCI/PnP F5 :Old Values (Shift)F2:Color IRQ 15 PCI/PnP F6 : Load BIOS Defaults F7 : Load SETUP Defaults
SB I/O Base Address
220h-22Fh 280h-28Fh 260h-26Fh 240h-24Fh Set SB I/O Base Address to 220h-22Fh. (Default Value) Set SB I/O Base Address to 280h-28Fh. Set SB I/O Base Address to 260h-26Fh. Set SB I/O Base Address to 240h-24Fh.
SB IRQ Select
IRQ 5 / 7 / 9 / 10. (Default Value: 5)
SB DMA Select
DMA 0 / 1 / 2/ 3. (Default Value: 1)
Enabled Disabled Enable MPU-401. Disable MPU-401. (Default Value)
Ps. When Force Feedback joystick is used, MPU-401 needs to be Enable.
MPU-401 I/O Address
330h-333h 300h-303h 310h-313h 320h-323h Set MPU-401 I/O Address to 330h-333h. (Default Value) Set MPU-401 I/O Address to 300h-303h. Set MPU-401 I/O Address to 310h-313h. Set MPU-401 I/O Address to 320h-323h.
Game Port (200h-207h)
Disabled Enabled Disable Game Port (200h-207h). Enable Game Port (200h-207h). (Default Value)
Hardware Monitor & MISC Setup
AMIBIOS SETUP HARDWARE MONITOR & MISC SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved ACPI Shut Down Temp. CPU Temperature System Temperature CPU Fan Speed System Fan Speed Vcore Vdd Vcc3 +5.000V +12.000V Disabled 32C/89F 32C/89F 7123 RPM 0 RPM 1.76 V 3.33 V 3. 27 V 4.97 V 12.18 V
ESC: Quit : Select Item F1 : Help PU/PD+/-/ : Modify F5 :Old Values (Shift)F2:Color F6 : Load BIOS Defaults F7 : Load Setup Defaults
Figure 10: Hardware Monitor & MISC Setup
ACPI Shutdown Temp. (C / F)
(This function will be effective only for the operating systems that support ACPI Function.) Disabled 60C / 140F 70C / 158F 80C / 176F 90C / 194F Disable ACPI Shutdown function. (Default Value) Monitor CPU Temp. at 60C / 140F, if Temp. > 60C / 140F system will automatically power off. Monitor CPU Temp. at 70C / 158F, if Temp. > 70C / 158F system will automatically power off. Monitor CPU Temp. at 80C / 176F, if Temp. > 80C / 176F system will automatically power off. Monitor CPU Temp. at 90C / 194F, if Temp. > 90C / 194F system will automatically power off.
CPU Temperature (C / F)
Detect CPU Temperature automatically.
System Temperature (C / F)
Detect System Temperature automatically.
CPU Fan Speed
Detect CPU Fan speed status automatically.
System Fan Speed
Detect System Fan speed status automatically.
Voltage (V) Vcore / Vdd / Vcc3 / +5V / +12V
Detect systems voltage status automatically.
Set Supervisor / User Password
When you select this function, the following message will appear at the center of the screen to assist you in creating a password.
PNP/PCI CONFIGURATION IDE HDD AUTO DETECTION Enter new supervisor password: LOAD BIOS DEFAULTS LOAD SETUP DEFAULTS SAVE & EXIT SETUP EXIT WITHOUT SAVING
III. Save BIOS In the very beginning, there is "Save Current BIOS" icon shown in dialog box. It means to save the current BIOS version. IV. Check out supported motherboard and Flash ROM: In the very beginning, there is "About this program" icon shown in dialog box. It can help you check out which kind of motherboard and which brand of Flash ROM are supported. Note: a. In method I, if it shows two or more motherboard's model names to be selected, please make sure your motherboard's model name again. Sellecting name will cause the system unbooted. b. In method II, be sure that motherboard's model name in BIOS unzip file are the same as your motherboard's. Otherwise, your system won't boot. c. In method I, if the BIOS file you need cannot be found in @BIOS server, please go onto Gigabyte's web site for downloading and updating it according to method II. d. Please note that any intercorruption during updating will cause system unbooted
Or else you can select flash BIOS in DOS mode. Please check your BIOS vendor (AMI or AWARD), your motherboard name and PCB version on the motherboard. 1. 2. 3. 4. Format a bootable system floppy diskette by the command format a:/s in command mode. Visit the Gigabyte website at http:// www.gigabyte.com.tw , Select the BIOS file you need and download it to your bootable floppy diskette. Insert the bootable diskette containing the BIOS file into the floppy diskette driver. Assuming that the floppy diskette driver is A, reboot the system by using the A: driver. At the A: > prompt, run the BIOS upgraded file by executing the Flash BIOS utility and the BIOS file with its appropriate extension. Example: (AMI tool) (Where 7zx-h.f1 is name of the BIOS file name) A:>flashxxx.exe 7zx-h.f1 Example: (Award tool) (Where 7zx-h.f1 is name of the BIOS file name) A:>Awdflash.exe 7zx-h.f1 5. Upon pressing the <Enter> key, a flash memory writer menu will appear on screen. Enter the new BIOS file name with its extension filename into the text box after file name to program. If you want to save the old BIOS file(perform as soon as system is operational, this is recommended), select Y to DO YOU WANT TO SAVE BIOS, then type the old BIOS filename and the extension after filename to save: This option allows you to copy the contents of the flash memory chip onto a diskette, giving you a backup copy of the original motherboard BIOS in case you need to re-install it. Select N to DO YOU WANT TO SAVE BIOS, if you dont want to save the old BIOS file. After the decision to save the old BIOS file or not is made, select Y to ARE YOU SURE TO PROGRAM when the next menu appear; wait until a message showing Power Off or Reset the system appears. Then turn off your system. Remove the diskette and restart your system. Hold down <Delete> key to enter BIOS setup. You must select Load Setup BIOS Default to activate the new BIOS, then you may set other item from the main menu.
Appendix E: Acronyms
Acronyms ACPI APM AGP AMR ACR BIOS CPU CMOS CRIMM CNR DMA DMI DIMM DRM DRAM DDR ECP ESCD ECC EMC EPP ESD FDD FSB HDD IDE IRQ I/O IOAPIC ISA LAN LBA LED MHz MIDI MTH MPT NIC OS Meaning Advanced Configuration and Power Interface Advanced Power Management Accelerated Graphics Port Audio Modem Riser Advanced Communications Riser Basic Input / Output System Central Processing Unit Complementary Metal Oxide Semiconductor Continuity RIMM Communication and Networking Riser Direct Memory Access Desktop Management Interface Dual Inline Memory Module Dual Retention Mechanism Dynamic Random Access Memory Double Data Rate Extended Capabilities Port Extended System Configuration Data Error Checking and Correcting Electromagnetic Compatibility Enhanced Parallel Port Electrostatic Discharge Floppy Disk Device Front Side Bus Hard Disk Device Integrated Dual Channel Enhanced Interrupt Request Input / Output Input Output Advanced Programmable Input Controller Industry Standard Architecture Local Area Network Logical Block Addressing Light Emitting Diode Megahertz Musical Interface Digital Interface Memory Translator Hub Memory Protocol Translator Network Interface Card Operating System To be continued
Acronyms OEM PAC POST PCI RIMM SCI SECC SRAM SMP SMI USB VID
Meaning Original Equipment Manufacturer PCI A.G.P. Controller Power-On Self Test Peripheral Component Interconnect Rambus in-line Memory Module Special Circumstance Instructions Single Edge Contact Cartridge Static Random Access Memory Symmetric Multi-Processing System Management Interrupt Universal Serial Bus Voltage ID
P50XR01E Gtab4M Italia Express 121 TX-14P1 DSC-V1 BC-137 GC4420 02 FW630 Inferno MP9 45 KW SHU 5300 HS6ZME Polaroid I533 M1001 NV-DS33B 25450 GR-DVL355 Galeo 2610 Alliance II Travelmate 6252 BSS610RFE SF-555P Digital 943BWX FP71V- 14MS15GT 740 Live 3100 R CCD-TRV98E Proheat 7950 A-X550 KV-36FS76U PFM42V1 CBX-D5 A25-S307 DA6473 Wolf NAF2 SDR-H250 F2 0 HDR-CX115E RX-V793 SC-7020 Lexmark X125 Vaci-5350 GFA-4402 3000CN T 7720 Converter Notebook M1717A-BZ BN68-02849B NT9110 KX-TG6411TW KNA-G520 CU-3E18EBE EW6F6W Suite X4 WF-F1062 MDR-NC300D 3VS351ID Ferrari 3200 MDR-IF240RK 19317 DCR-TRV320E 2 1 PRO 454 DST450 F5D8235ed4 R4000 Presario 7000 XD-655 DCR-DVD105 Psr-1500 RW33ebss GA-M720-us3 93243 Review LK-90TV Afipr ZWG6165 HD4917 M-400 SRS583HDP TL-WN551G SEW-AM100 CA3140 Magturbo Ergo Super 8 CQ138T-ST D52W27D KDL-37L4000 Samsung 712N NV-GX7K Pnts 30-4 DR-BT25NX UE46C7700WS 997MB Flash Curve 9300 WD-57731
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101