<><><><> <Enter> <Esc> CMOS Status Page Setup Menu Option Page Setup Menu Status Page Setup Menu Option Page Setup Menu CMOS CMOS O ption Page Setup Menu BIOS CMOS BIOS/Q-Flash CMOS
<+/PgUp> <-/PgDn> <F1> <F2> <F5> <F6> <F7> <F8> <F9> <F10>

/Option Page Setup Status page setup
F1 <Esc>

- 29 -

BIOS

( BIOS Ver.: F3)

Award BIOS CMOS ( ) <Enter>

Ctrl+F1

Standard CMOS Features

BIOS

Advanced BIOS Features

Award

Integrated Peripherals

Power Management Setup

PnP/PCI Configuration

PCI ISA

PC Health Status
MB Intelligent Tweaker (M.I.T.)

CPU

Load Fail -Safe Defaults

Fail-Safe Defaults

Load Optimized Defaults

Optimized Defaults

- 30 -

Set Supervisor Password

Set User Password

Save & Exit Setup

CMOS CMOS

Exit Without Saving

CMOS

Italiano Deutsch Espaol

- 31 -
2-1 Standard CMOS Features
<> <> <> <> BIOS Week Month 1 31() Day Year
<> <> <> 24 1 13:00:00
IDE Channel 0 Master, Slave
IDE HDD Enter IDE 0 ( )IDE Auto POST BIOS IDE ( ) None IDE Manual 4 Access Mode CHS/LBA/Large/Auto ( Auto) Cylinder Head Precomp Landing Zone Sector NONE <Enter> GA-8I915G Pro

- 32 -

Drive A / Drive B
A B None 360K, 5.25 5.25 PC 360K 1.2M, 5.25 5.25 AT 1.2M (3 3.5 ) 720K, 3.5 3.5 720K 1.44M, 3.5 3.5 1.44M 2.88M, 3.5 3.5 2.88M
Floppy 3 Mode Support (for Japan Area)
Disabled Drive A Drive B Both A 3 B 3 A B 3

Halt on

No Errors All Errors BIOS All, But Keyboard ( ) All, But Diskette All, But Disk/Key

Memory

BIOS POST ( ) Base Memory BIOS POST ( ) 512K 512K 640K 640K Extended Memory BIOS POST CPU 1M Total Memory

- 33 -

2-2 Advanced BIOS Features

# Intel Pentium 4

Hard Disk Boot Priority
( ) SCSI RAID <><> <+><-> <ESC>
First / Second / Third Boot Device
Floppy LS120 Hard Disk CDROM ZIP USB-FDD USB-ZIP USB-CDROM USB-HDD LAN Disabled LS120 CDROM ZIP USB-FDD USB-ZIP USB-CDROM USB-HDD LAN

Password Check

( ) System ENTER [SETUP] GA-8I915G Pro Setup

- 34 -

CPU Hyper-Threading
Enabled CPU ( ) CPU NT4 OS CPUID Maximum 3 ( ) Windows XP CPUID Limit 1MB 4MB 8MB ( ) 16MB 32MB
Disabled Enabled Disabled 1MB 4MB 8MB 16MB 32MB

Limit CPUID Max. to 3

On-Chip Frame Buffer Size

- 35 -

2-3 Integrated Peripherals

On-Chip Primary PCI IDE

Enabled Disabled IDE ( ) IDE

- 36 -

On-Chip SATA Mode
Disabled Auto Combined BIOS ( ) SATA Combined 4 HDD SATA 2 PATA IDE 2 On-Chip SATA Enhanced 6 HDD On-Chip SATA Non-Combined SATA PATA PATA IDE Ch.1 Master/Slave ( ) PATA IDE Ch.0 Master/Slave

Enhanced Non-Combined

PATA IDE Set to
Ch. 1 Master/Slave Ch. 0 Master/Slave

SATA Port 0/2 Set to

On-Chip SATA ModePATA IDE Set to PATA IDE Ch.1 Master/Slave Ch.0 Master/Slave

SATA Port 1/3 Set to

On-Chip SATA ModePATA IDE Set to PATA IDE Ch.0 Master/Slave Ch.1 Master/Slave

USB Controller

Enabled Disabled USB ( ) USB

USB 2.0 Controller

USB 2.0 Enabled USB 2.0 ( ) Disabled USB 2.0

USB Keyboard Support

Enabled Disabled USB USB ( ) USB USB ( ) Azalia ( ) Azalia IEEE 1394 ( )

USB Mouse Support

Enabled Disabled

Azalia Codec

Auto Disabled

Onboard H/W 1394

Onboard H/W LAN
Enabled Disabled LAN ( )

- 37 -

Onboard LAN Boot ROM
LAN ROM Enabled ( ) Disabled

Onboard Serial Port 1

Auto BIOS 1 1 3F8 3F8/IRQ4 ( ) 1 2F8 2F8/IRQ3 1 2E8 3E8/IRQ4 1 2E8 2E8/IRQ3 1 Disabled

Onboard IrDA Port

Auto 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled
BIOS IrDA IrDA 3F8/IRQ4 IrDA 2F8/IRQ3 ( ) IrDA 3E8/IRQ4 IrDA 2E8/IRQ3 IrDA

UART Mode Select

I/O (IR) I/O UART ASKIR ASKIR I/O UART IrDA IrDA ( )

UR2 Duplex Mode

IR UART Half IR ( ) Full IR

Onboard Parallel port

Disabled 378/IRQ7 278/IRQ5 3BC/IRQ7 LPT LPT 378/IRQ7 ( ) LPT 278/IRQ5 LPT 3BC/IRQ7 ( ) ECP EPP ECP DMA 3 ( ) ECP DMA 1

Parallel Port Mode

SPP EPP ECP ECP+EPP 3 1

ECP Mode Use DMA

- 38 -
2-4 Power Management Setup

ACPI Suspend Type

S1 (POS) S3 (STR) Instant-off Delay 4 Sec. ACPI S1/POS (Power On Suspend) ( ) ACPI S3/STR (Suspend To RAM) ( ) 4 4 PME ( ) Power on by Ring Power on by Ring ( )

Soft-off by PWR-BTTN

PME Event Wake Up

Disabled Enabled

Power On by Ring

Resume by Alarm

Resume by Alarm / ( ) Disabled Enabled RTC Date (of Month) Alarm: Time (hh: mm: ss) Alarm: (0~23):(0~59):(0~59)

Power On By Mouse

Disabled Double Click ( ) PS/2

- 39 -

Power On By Keyboard
Password Disabled Keyboard 98

1-5 ( )

KB Power ON Password
Power On by KeyboardPassword (15 ) Enter Enter

AC Back Function

Soft-Off Full-On Memory AC Off ( ) AC On AC AC

- 40 -

2-5 PnP/PCI Configurations

PCI 1 IRQ Assignment

Auto 3,4,5,7,9,10,11,12,14,15 PCI 1 IRQ ( ) PCI 1 IRQ PCI 2 IRQ ( ) PCI 2 IRQ

PCI 2 IRQ Assignment

Auto 3,4,5,7,9,10,11,12,14,15

- 41 -

2-6 PC Health Status
Current Voltage (V) Vcore / DDR25V / +3.3V / +12V

Current CPU Temperature

Current CPU/POWER/SYSTEM FAN Speed (RPM)

CPU//

CPU Warning Temperature
60C / 140F 70C / 158F 80C / 176F 90C / 194F Disabled Disabled Enabled Disabled Enabled CPU 60C / 140F CPU 70C / 158F CPU 80C / 176F CPU 90C / 194F ( ) ( ) CPU ( ) a. CPU 65 CPU b. CPU c. CPU 40 CPU
CPU/POWER/SYSTEM FAN Fail Warning CPU Smart FAN Control

- 42 -

CPU FAN PIN Type
CPU Smart FAN Control CPU 3 PIN CPU FAN PIN Type 3 ( ) 4 PIN CPU FAN PIN Type 4
2-7 MB Intelligent Tweaker (M.I.T.)

CPU Clock Ratio

CPU CPU

C.I.A.2

C.I.A.2(CPU Intelligent Accelerator 2) CPU CPU ( ) Disabled Cruise C.I.A.2 Cruise (CPU CPU (3% 5% 7%) Sports C.I.A.2 Sports (CPU CPU (7% 5% 9%) Racing C.I.A.2 Racing (CPU CPU (7% 9% 11%) Turbo C.I.A.2 Turbo (CPU CPU (13% 15% 17%) Full Thrust C.I.A.2 Full Thrust (CPU CPU (15% 17% 19%)

- 43 -

CPU Host Clock Control
20 CMOS Disabled CPU ( ) Enabled CPU

CPU Host Frequency (Mhz)

CPU Host Clock Control 100MHz ~ 355MHz CPU 100MHz 355MHz FSB800 Pentium 4 CPU Host Frequency 200MHz

Memory Frequency For

CMOS FSB( ) 533MHz x 2.5 2.5 x x DRAM SPD Auto ( ) FSB( ) 800MHz x 1.66 1.66 x 2.0 2.0 x 2.66 2.66 DRAM SPD Auto ( )

Memory Frequency (Mhz)

Memory Frequency For

DIMM OverVoltage Control

DIMM Normal DIMM ( ) +0.1V DIMM +0.1V +0.2V DIMM +0.2V +0.3V DIMM +0.3V
PCI-E OverVoltage Control
Normal +0.1V +0.2V +0.3V PCI-E ( ) PCI-E +0.1V PCI-E +0.2V PCI-E +0.3V

CPU Voltage Control

CPU Vcore 0.8375V 1.6000V ( ) CPU CPU CPU

Normal CPU Vcore

CPU Vcore GA-8I915G Pro

- 44 -

2-8 Load Fail-Safe Defaults

Fail-Safe defaults

2-9 Load Optimized Dafaults

BIOS

- 45 -

Espaol Deutsch Italiano

2-10 Set Supervisor/User Password
BIOS 8 <Enter> <Enter> <Esc> <Enter> BIOS 2 SUPERVISOR PASSWORD USER PASSWORD BIOS BIOS BIOS Password CheckSystem BIOS Password CheckSetup

- 46 -

2-11 Save & Exit Setup

Y RTC CMOS N

2-12 Exit Without Saving

- 47 -

- 48 -

3

Windows XP CD- CD-ROM CD- CD-ROM Run.exe

3-1

CD Xpress Install install Xpress Install
Xpress Install Windows XP USB2.0 Windows Service Pack Windows Service Pack ? ( USB2.0 )

- 49 -

Italiano Espaol Deutsch

3-2

Gigabyte intall

3-3 CD

CD

- 50 -

3-4

- 51 -

- 52 -

4-1

( Unique Software Utilities MB )
U-PLUS D.P.S. (Universal Plus Dual Power System)
U-Plus Dual Power System (U-Plus DPS), 8 U-Plus D.P.S. CPU LGA775 Intel Pentium4 Intel U-Plus D.P.S 4 LED
M.I.T. (Motherboard Intelligent Tweaker)
Motherboard Intelligent Tweaker (M.I.T.) BIOS GIGABYTE M.I.T. (CPU ) Gigabyte C.I.A.2 M.I.B.2 BIOS M.I.T C.I.A.2 (GIGABYTE CPU Intelligent Accelerator 2) CPU CPU CPU CPU M.I.B. Memory Intelligent Booster 2 (M.I.B.2) 10%
C.I.A.2 (CPU Intelligent Accelerator 2)
M.I.B.2 (Memory Intelligent Booster 2)
S.O.S. (System Overclock Saver)
System Overclock Saver (S.O.S.) GIGABYTE S.O.S PC Clear CMOS S.O.S.

BIOS PC

C.O.M. (Corporate Online Management)
CPU / C.O.M. MIS BIOS

- 53 -

4-1-1 Xpress Recovery

Xpress Recovery

Xpress Recovery OS / 1. 2. 3. 4. 5. FAT16 FAT32 NTFS IDE1 1 OS HPA IDE 1 Ghost NTFS Xpress Recovery

Xpress Recovery

1. CD (BMP ) BIOS Advanced BIOS Feature CD CD CD BIOS / Boot from CD: Boot from CD: Xpress Recovery Xpress Recovery F9

- 54 -

F9 ( ) F9

F9 Xpress Recovery

CD Xpress Recovery F9 Xpress Recovery OS Xpress Recovery

- 55 -

1. Execute Backup Utility:
B Esc Backup Utility F9 Xpress Recovery CD Xpress Recovery
2. Execute Restore Utility:

R Esc

3. Remove Backup Image:

(Y/N)

4. Set Password:
4-16 (a-z 0-9) Esc Xpress Recovery Xpress Recovery Set Password New Password/Confirm PasswordEnter

5. Exit and Restart:

- 56 -

4-1-2 BIOS

A. Dual BIOS

Dual BIOS 2 BIOS (ROM) BIOS BIOS BIOS BIOS BIOS BIOS P C

B. Dual BIOS Q-Flash

a. (POST) <Del> AWARD BIOS SETUP <F8> FLASH

BIOS/Q-Flash

- 57 -

Dual BIOS

Italiano Deutsch
Wide Range Protection: Disable (Default), Enable
1 BIOS (ESCD ) Wide Range Protection Enable P C BIOS 2 (SCSI LAN ) ROM BIOS BIOS BIOS
Boot Form : Main BIOS (Default), Backup BIOS
1 BIOS BIOS/ BIOS 2 BIOS Boot From: Main BIOS (Default)
Auto Recovery : Enable (Default), Disable
2 BIOS BIOS BIOS (BIOS Power Management Setup( ) ACPI Suspend Type (ACPI ) Suspend to RAM( RAM) Enable( ) ) (BIOS Del )
Halt On Error : Disable (Default), Enable
BIOS BIOS (WIDE RANGE PROTECTION error) Halt On Error Enable PC Auto Recovery Disabled <or the other key to continue> Auto Recovery Enable <or the other key to Auto Recover>
Keep DMI Data : Enable (Default), Disable
DMI BIOS ( ) DIMI BIOS
Copy Main ROM Data to Backup

( ROM ROM )

BIOS Recovery: Main to Backup

BIOS BIOS

BIOS Recovery: Backup to Main
BIOS BIOS ( )

Load Default Settings

dual BIOS

Save Setting to CMOS

GA-8I915G Pro

- 58 -

1 Q-Flash
Q-Flash ROM BIOS BIOS BIOS Q-Flash BIOS DOS Windows Q-Flash BIOS BIOS BIOS Gigabyte Technology Co., Ltd
Q-Flash BIOS 1. 2. 3. Gigabyte BIOS BIOS BIOS (.Fxx 8KNXPU.Fba) PC Del BIOS
BIOS 2 BIOS I BIOS II

I BIOS Q-Flash BIOS

Gigabyte BIOS Q-Flash BIOS BIOS Q-Flash BIOS Q-Flash GA-8KNXP Ultra BIOS Fa3 Fba

BIOS Fa3

- 59 -

Q-Flash

1 Q-Flash Del BIOS

2 F8 Y BIOS/Q-Flash

Q-Flash/ BIOS

Q-Flash/ BIOS

BIOS BIOS

Q-Flash

Q-Flash

BIOS

8 2 BIOS ROM Enter

Q-Flash

4 Enter

Q-Flash/ BIOS 4

- 60 -
Q-Flash BIOS BIOS Q-Flash BIOS

1. Q-Flash Load Main BIOS from Floppy Enter BIOS BIOS Save Main BIOS to Floppy 1 BIOS Enter

1 8KNXPU.Fba

BIOS

Enter BIOS

BIOS Are you sure to update BIOS?

- 61 -

BIOS Y BIOS BIOS BIOS

BIOS Q-Flash

BIOS 1-4
Q-Flash ESC Y Q-Flash

BIOS

BIOS Fab

- 62 -

Del BIOS BIOS Load Fail-Safe Defaults Enter BIOS BIOS BIOS BIOS
Y 7. Save & Exit Setup CMOS BIOS BIOS

Y

II BIOS Q-Flash BIOS

BIOS Q-Flash BIOS

- 63 -

Q-Flash

Q-Flash BIOS

Q-Flash Q-Flash

Q-Flash
3 Enter Q-Flash 4 Q-Flash BIOS BIOS Q-Flash BIOS
Q-Flash Update BIOS from Floppy Enter BIOS BIOS Save BIOS to Floppy 1 BIOS Enter

1 8GE800.F4

BIOS
BIOS Are you sure to update BIOS? BIOS

- 64 -

BIOS Y BIOS BIOS

BIOS F4
Del BIOS BIOS Fail-Safe Defaults (BIOS ) BIOS Fail-Safe Defaults I 6-7

BIOS

2 @BIOS
DOS @BIOS @BIOS Windows BIOS @BIOS BIOS 1 @BIOS 2 @BIOS
Start/Programs/GIGABYTE/@BIOS

@BIOS Install

3 @BIOS

Update New BIOS

4 @BIOS
I. BIOS a. Internet Update b. Update New BIOS c. @BIOS d. e. BIOS BIOS a. Internet Update b. Update New BIOS c. All Files d. BIOS ( 8I915G Pro.F1) e.

- 66 -

III. BIOS Save Current BIOS BIOS IV. ROM About this program ROM
I 2 II. II BIOS III. I BIOS @BIOS Gigabyte II IV. I.

- 67 -

4-1-3 2/4/5.1/7.1

C-Media CPL CMI Audio Config Information Show the audio configuration icon in the system tray

5 -2 -4 --

2/4/5.1/7.1
5.1 -- / 7.1 -- / ( ) / ( 7.1 ) GA-8I915G Pro

- 68 -

2

1

2
3 C-Media 3D Audio Configuration Main Setting Audio System Status Smart Jack

- 69 -

4

1

2
3 C-Media 3D Audio Configuration Main Setting Audio System Status Smart Jack

- 70 -

5.1
1 / /

/

2

- 71 -

7.1
1 / /

/

- 72 -

I/O

-(1) PCM (2) AC3 -(1) PCM

/ //

Enable Multiple Streaming Sound PlaybackSound Recording C-Media Azalia Rear Panel Enable Multiple Steaming C-Media Azalia Front Panel

- 73 -

4-2
http://tw.giga-byte.com/faq/faq.htm 1 BIOS BIOS BIOS BIOS Ctrl F1 2 3 EasyTune 4 EasyTune 4 EasyTune 4 4 HDD IDE3 IDE4 RAID Win 2000 XP RAID ATA CD-ROM RAID ( http://tw.giga-byte.com/support/user_pdf/raid_manual.pdf) ) 5 CMOS CMOS CMOS CMOS 1. 2. 3. 10 ( 1 ) 4. 5. 6. Del BIOS Fail-Safe Defaults 7. 6 BIOS BIOS Fail-Safe Defaults( BIOS Defaults) CMOS 7 / 8 VGA VGA Gigabyte VGA VGA

- 74 -

9 IDE 2 USB USB 10 AMI BIOS AWARD BIOS 1 * 2 CMOS 1 1 DRAM * 8 1 1 2 2 3 64K 1 3 4 1 9 BIOS ROM 5 DRAM A20 7 8 / 9 ROM 10 CMOS / 11 11 RAID IDE RAID ATA BIOS BIOS 1. Advanced BIOS features --> (SATA)/RAID/SCSI boot order: SATA 2. Advanced BIOS features --> First boot device: SCSI 3. Integrated Peripherals --> Onboard H/W ATA/RAID: enable RAID RAID controller function RAID RAID ATA ATA 12 IDE/SCSI/RAID BIOS BIOS 1. Advanced BIOS features --> (SATA)/RAID/SCSI boot order: SCSI 2. Advanced BIOS features --> First boot device: SCSI RAID/SCSI BIOS (RAID ATA)

- 75 -

- 76 -

- 77 -

- 78 -
Taiwan (Headquarters) GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien, Taiwan, R.O.C. TEL: +886 (2) 8912-4888 FAX: +886 (2) 8912-4003 Tech. Support : http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address (English): http://www.gigabyte.com.tw WEB address (Chinese): http://chinese.giga-byte.com U.S.A. G.B.T. INC. Address: 17358 Railroad St, City of Industry, CA 91748. TEL: +1 (626) 854-9338 FAX: +1 (626) 854-9339 Tech. Support : http://www.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.giga-byte.com Germany G.B.T. TECHNOLOGY TRADING GMBH Address: Friedrich-Ebert-Damm Hamburg TEL: +49-40-2533040 (Sales) +49-1803-428468 (Tech.) TEL: +49-40-25492343 (Sales) +49-1803-428329 (Tech.) Tech. Support : http://de.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.de

Japan NIPPON GIGA-BYTE CORPORATION WEB address : http://www.gigabyte.co.jp Singapore
GIGA-BYTE SINGAPORE PTE. LTD. Tech. Support : http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp
G.B.T. TECH. CO., LTD. Address: GUnit 13 Avant Business Centre 3 Third Avenue, Denbigh West Bletchley Milton Keynes, MK1 1DR, UK, England TEL: +44-1908-362700 FAX: +44-1908-362709 Tech. Support : http://uk.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://uk.giga-byte.com
The Netherlands GIGA-BYTE TECHNOLOGY B.V. TEL: +NL Tech.Support: 0900-GIGABYTE (0900-44422983) BE Tech.Support: 0900-84034 FAX: +Tech. Support : http://nz.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.giga-byte.nl

- 79 -

China
NINGBO G.B.T. TECH. TRADING CO., LTD. Tech. Support : http://cn.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.com.cn Shanghai TEL: +86-021-63410999 FAX: +86-021-63410100 Beijing TEL: +86-010-82886651 FAX: +86-010-82888013 Wuhan TEL: +86-027-87851061 FAX: +86-027-87851330 GuangZhou TEL: +86-020-87586074 FAX: +86-020-85517843 Chengdu TEL: +86-028-85236930 FAX: +86-028-85256822 Xian TEL: +86-029-85531943 FAX: +86-029-85539821 Shenyang TEL: +86-024-23960918 FAX: +86-024-23960918-809
Australia GIGABYTE TECHNOLOGY PTY. LTD. Address: 3/6 Garden Road, Clayton, VIC 3168 Australia TEL: +85616288 FAX: +85616222 Tech. Support : http://www.giga-byte.com.au/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.giga-byte.com.au France GIGABYTE TECHNOLOGY FRANCES S.A.R.L. Tech. Support : http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.fr Russia Moscow Representative Office Of Giga-Byte Technology Co., Ltd. Tech. Support : http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.ru Poland Representative Office Of Giga-Byte Technology Co., Ltd. POLAND Tech. Support : http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.pl

- 17 -

2-/4-/5.1-/7.1-
1) 2) 3) 4) 5) 6) 7) 8) 9) 10)
ATX_12V ATX (Power Connector) CPU_FAN SYS_FAN PWR_FAN NB_ FAN FDD IDE S_ATA1/S_ATA2/S_ATA3/S_ATA4 PWR_LED
11) 12) 13) 14) 15) 16) 17) 18) 19)
F_PANEL AZALIA_FP CD_IN F_USB1 / F_USB2 F1_1394 / F2_1394 IR COMA CLR_CMOS BAT

- 18 -

1/2) ATX_12V/ATX (

ATX_12V !

ATX_12V

( ) ATX 20 24

+12V +12V
3.3V 3.3V VCC VCC Power Good 5V SB (stand by +5V) +12V +12V 3.3V( 24 ) 3.3V -12V PS_ON(soft On/Off)

-5V VCC VCC VCC

- 19 -
3/4/5) CPU_FAN / SYS_FAN / PWR_FAN (

+12V +12V ! CPU (GND)

3-pin/4-pin( CPU_FAN )

CPU_FAN

PWR_FAN

6) NB_FAN (

- 20 -

7) FDD (

360KB 720KB 1.2MB 1.44MB 2.88MB

8) IDE (IDE

IDE IDE
IDE IDE ( Slave ( ) IDE IDE ) IDE

Master

- 21 -
9) S_ATA1/S_ATA2/S_ATA3/S_ATA4 (Serial ATA

Serial ATA 150MB

BIOS Serial ATA
S_ATA (Control by I CH 6)

TXP TXN RXN RXP

10) PWR_LED
PWR_LED ON OFF Power LED Suspend

MPD+ MPDMPD-

- 22 -

11) F_PANEL (

Messa ge L ED / Po we r / Sl ee p LED
Sp eaker Co nne ctor Pow e r Sw itch

MSG+ MSGPW+ PW-

SPEAK+

RES+ NC HD-

IDE H a rd D i sk Acti ve LED
HD (IDE Hard Disk Active LED) ( ) SPEAK (Speaker Connector) ( ) RES (Reset Switch) ( ) PW (Power Switch) ( ) MSG(Message LED/Power/Sleep LED) ( ) NC( )
Pin 1: LED anode(+) Pin 2: LED cathode(-) M Pin 1: VCC(+) +5v Pin 2- Pin 3: NC Pin 4: Data(-) Open: Normal Operation Close: Reset Hardware System M Open: NormalOperation : Close: Power On/Off : / M Pin 1: LED anode(+) Pin 2: LED cathode(-) M

- 23 -

R eset Swi tch

SPEAK20 19

12) AZALIA_FP (
MIC2_L MIC2_R -ACZ_DET Line2_R FSENSE1 FAUOIO_JD LINE2_L FSENSE2

13) CD_IN (

CD-ROM

DVD-ROM CD

- 24 -

14) F_ USB1 / F_USB2 (

"USB Device Wake up From S3"
USB DXUSB DyUSB DX+ USB Dy+
15) F1_1394/F2_1394 (IEEE 1394
1394 (Insitute of Electrical Eletronics Engineers) IEEE1394 IEEE1394

IEEE1394

F2_1394

F1_1394

TPA2+ TPA2-

TPB2+ TPB2-

TPA0+ TPA0-

TPB0+ TPB0-

TPA1+ TPA1-

TPB1+ TPB1-

- 25 -

16) IR (

17) COMA (
NDCDANSINA NSOUTA NDTRANDSRANRTSANCTSANRIA-

- 26 -

18) CLR_CMOS (

CMOS 1-2

19) BAT (

CMOS 1. 2. 3. 4.

- 27 -

- 28 -

BIOS(Basic Input and Output Sy stem) CMOSSETUP CMOS SETUP CMOSSRAM CMOSSRAM BIOS POST (Pow er-On Self Test ) BIOS CMOSSETUP BIOS BIOS + F1" BIOS BIOS BIOS @BIOSTM Q-FlashTM BIOS @BIOSTM BIOS BIOS

<Del> "Ctrl

Q-FlashTM BIOS
< <Enter> <Esc> <Page Up> <Page Dow n> <F1> <F2> <F5> <F6> <F7> <F8> <F9> <F10>

> SETUP

( Fail-Safe Optimized Q-Flash CMOS SETUP ( (

Dual BIOS/

< F1> BIOS CMOSSETUP <Esc>

- 29 -

CMOSSETUP

<Enter>

CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software } } } } } } } Stan dard CM OS Features Advanc ed BIOS Fe atures IntegratedPeripherals Power Manag ement Setup PnP/PCI Configur ations PC H ealth Status MB In telligent Tweaker(M. I.T.) Load Fail-Safe Defaults Load Optimized Defaults Set Su pervisor Pa ssword Set User Password Save & Exit Setup Exit Without Saving higf: Selec t Item F10: Save & Exit Setup Time, Date, Har d DiskTy pe.
ESC: Qu it F8: Du al BIOS/Q- Flash

"Ctrl+F1"

n Standard CMOS Features ( n Advanced BIOS Features (

BI S O

CMOS BIOS )
n Integrated Peripherals (

COM port LPT port AC97

IDE SATA USB IEEE1394
n Power Managem ent Setup (
n PnP/PCI Configuration (

ISA PnP

n PC Health Status ( n MB Intelligent Tw eaker(M.I. T.) (

) / ) )

n Load Fail-Safe Defaults (

Fai l-Safe

BIOS CMOS
n Load Optimized Defaults ( n Set Supervisor Password (

Optim ized

- 30 -
n Set User P assword ( n Save & Exi t Setup (

SETUP <F10>

PC BIOS BIOS

n Exit Without Sav ing (

<ESC>

- 31 -

Standard CMOS Features (
Date(mm:dd:y y ) Time (hh:mm:ss)
Item Help Menu Level} Change the day, month, y ear <Week> Su n. to Sa t. <Month> Jan. to Dec. <Day > 1 to 31 (or maximum allowe d in the m onth) <Y ear> to 2 098

CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software Stan dard CM OS Features Thu, Ap r 22:3 1:24 [None] [None] [1.44M, 3.5"] [None] [Disabled] [All, But Key board] 640K 127M 128M
} IDE Channel 0 M aster } IDE Channel 0 Slave Drive A Driv e B Flopp y 3 Mode Suport Holt On BaseMemory ExtendedMemory Total Memory
higf: M ove Enter: Select F5: Previo us Values
+/-/PU/P D:Value F6: Fail-Sa ve Default

F10: Save

ESC: Ex it F1: Gene ral Help F7: Op timized De faults

Date (mm:dd:yy) (

) / Time (hh:mm:ss) (

/ / / /

(mm) (dd) (yy)

1 28/29/30/2098

IDE Channel 0 Master, Slave [
IDE HDD Auto-Detection IDEChannel 0 Master(Slav e) None Auto Manual Access Mode Cylinder Head Precomp Landing Zone Sector "Enter"

)IDE None IDE (

BIOS POST

) Auto)

CHS/ LBA/ Large/ Auto(

Precompensation

"None"

- 32 -

Drive A / Drive B (
None 360K, 5.25" 1.2M, 5.25" 720K, 3.5" 1.44M, 3.5" 2.88M, 3.5" Disabled Driv e A Driv e B Both 5.25 5.3 3

A:/ B:

360KB 1.2MB 720KB 1.44MB 2.88MB

Floppy 3 Mode Support (

A: B: A: 3Mode 3Mode 3Mode 3 Mode

3 Mode

Halt on (
POST No Errors All Errors All, But Key board All, But Disk ette All, But Disk/Key

Memory (

STANDARDCMOS SETUP BaseMemory ExtendedMemory
BIOS POST(Pow er On SelfTest) PC 640KB MS-DOS
Base Other Memory Module TotalMemory

- 33 -

Advanced BIOS Features (
Item Help Menu Level} Select Hard Disk Boot Device Priority
CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software Advanc ed BIOS Fe atures } Hard Disk Bo ot Prio rity First Boot De vice Second Bo ot Device Third Boo t Device Passwor d Check # CPUHy per-Threading Limit CPUID Max. to 3 On-Chip Frame Buffer Size [Press Enter] [Floppy ] [Hard Disk] [CDROM] [Setup] [Enabled] [Enabled] [8MB]

"#"

Intel Pentium 4 HT
Hard Disk Boot Priority (
< > < > <ESC>

<+> <->

First / Second / Third Boot Dev ice (
Floppy LS120 Hard Disk CDROM ZIP USB-FDD USB-ZIP USB-CDROM USB-HDD LAN Disabled

ZIP USB USB-ZIP USB USB

Password Check (

System Setup

CMOSSETUP CMOSSETUP SETUP ( ) <Enter>

- 34 -

CPU Hyper-Threading (

Enabled Disabled CPU (

Limit CPUID Max. to 3
Enabled ( Disabled ) ( NT4.0)
On-Chip Frame Buffer Size
1MB 4MB 8MB 16MB 32MB On-chip frame buffer size 1MB On-chip frame buffer size 4MB On-chip frame buffer size 8MB ( On-chip frame buffer size 16MB On-chip frame buffer size 32MB

- 35 -

Integrated Peripherals (
[Enabled] [Auto] Ch.1 Master/Slave Ch.2 Master/Slave Ch.3 Master/Slave [Enabled] [Enabled] [Disabled] [Disabled] [Auto] [Enabled] [Enabled] [Disabled] [3F8/IRQ4] [2F8/IRQ] [IrDA] [Half] [378/IRQ7] [SPP] +/-/PU/P D:Value F6: Fail-Sa ve Default F10: Save

Item Help Menu Level}

CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software IntegratedPeripherals On-Chip Primary PCI IDE On-Chip SATA Mode x PATA IDE Se t to SATA Port 0/2 Se t to SATA Port 1/3 Se t to USB Contro ller USB 2.0 Contr oller USB K ey board Su pport USB Mouse Supp ort Azalia Codec Onboard H/W 1394 Onboard H/W LAN Onboa rd LAN Boo t ROM Onboar d Serial P ort 1 Onboard I rDA Port UART Mod e Select UR2 Duplex Mode Onboard Par allel Port Parallel Port Mode higf: M ove Enter: Select F5: Previo us Values
CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software IntegratedPeripherals x ECP Mode Use DMA 3 Item Help Menu Level}
On-Chip Primary PCI IDE (

Enabled Disabled

channel

PCI IDE

channel IDE

- 36 -

On-Chip SATA Mode
Disabled Auto Combined Enhanced Non-Combined BIOS ( ) On-Chip SATA mode Combined On-Chip SATA mode Enhanced On-Chip SATA mode Non-Combined PATA PATA IDE Ch. 1 Master/Slav e ( PATA IDE Ch. 0 Master/Slav e )

PATA IDE Set to

Ch.1Master/Slav e Ch.0Master/Slav e

SATA Port 0/2 Set to

PATA IDE "On-Chip SATA Mode" "PATA IDE Set to" Ch. 1 Master/Slav e Ch. 0 Master/Slav e "On-Chip SATA Mode" "PATA IDE Set to" Ch. 0 Master/Slav e Ch. 1 Master/Slav e USBController Enabled Disabled USB Controller ( USB Controller USB2.0 Controller USB 2.0 Controller ( USB 2.0 Controller )

SATA Port 1/3 Set to

PATA IDE

USB Controller

USB 2.0 Controller
Enabled Disabled Enabled Disabled )

USB Keyboard Support (

USB USB

USB Enabled) ) USB

USB Mouse Support (

Enabled Disabled USB USB

( ( Azalia
USBDev ice Enabled) ) ( ) USB

Azalia Codec

Auto Disabled Azalia IEEE1394 ( )

Onboard H/W 1394

Onboard H/W LAN (
onboard H/W LAN onboard H/W LAN

- 37 -

Onboard LAN Boot ROM (

( BIOS

Onboard Seri al Port 1 (
Auto 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled Auto 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled IrDA ASKIR 1 BIOS IrDA IrDA IrDA IrDA IrDA I/ O I/ O UARTMode Select IR IR 3F8 2F8 3E8 2E8
COM 1 COM 2 COM 3 COM 4 3F8 2F8 3E8 2E8 /IRQ4 ( /IRQ3 /IRQ4 /IRQ3 )

Onboard IrDA Port

/IRQ4 /IRQ3 ( /IRQ4 /IRQ3

UART Mode Select

IrDA ASKIR [Normal] ( ) 378/IRQ7 ( 278/IRQ5 3BC/IRQ7 ) ( )

UR2 Dupl ex Mode

Full Half 378/IRQ7 278/IRQ5 3BC/IRQ7 Disabled

Onboard Parallel port (

Parallel Port Mode (

SPP EPP ECP ECP+EPP

( EPP (Enhanced Parallel Port) ECP (Ex tended Capabilities Port) EPP ECP )

ECP Mode Use DMA

ParallelPort Mode "ECP" "ECP+EPP" ECP Mode use DMA 3 ( ) ECP M ode use DMA 1

- 38 -

Power Management Setup (
[S1(POS)] [Instant-off] [Enabled] [Enabled] [Disabled] Every day 0: 0: 0 [Disabled] [Disabled] Enter [Soft-Off]
CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software Power Manag ement Setup ACPI Susp end Ty pe Soft-Off b y PWR-BTTN PME E vent Wake Up Power On by Ring Resumeby Alarm x Date (of Month) Alarm x Time(hh:mm:ss) Alarm Power On By Mouse Power On By Key board x KB Power O N Password AC Back Func tion

ACPI Suspend Type (

S1(POS) S3(STR) Ins tant-off Delay 4 Sec. ACPI ACPI
S1/POS (Pow erOn Suspend) ( S3/STR (Suspend To RAM) )

Soft-off by PWR-BTTN (

( 4 +5VSB 1 ) )

PME Event Wake Up

Disabled Enabled

Power On by Ring (

Resume by Alarm (
Enabled Disabled Enabled Day of Month Alarm : Time (hh: mm: ss) Alarm :
Ev ery day , 1~31 (0~23) : (0~59) : (0~59)

Power On By Mouse (

Disabled Double Click ( PS/2 )

- 39 -

Power On By Keyboard (
Disabled Passw ord Key board 98 ( 1-5 Window s98 )

KB Power ON Password (

"Pow erOn by Keyboard" Enter 1-5 "Passow rd"

AC Back Function (

Soft-Off Full-On Memory

- 40 -

PnP/PCI Configurations (
PCI 1 IRQ Assignment PCI 2 IRQ Assignment [Auto] [Auto]
CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software PnP/PCI Configur ations

PCI 1 IRQ Assignm ent (

Auto 3,4,5,7,9,10,11,12,14,15

BIOS PCI 1 IRQ

) 3,4,5,7,9,10,11,12,14,15

PCI 2 IRQ Assignm ent (

BIOS PCI 2 IRQ

- 41 -

PC Health Status (
Vcore DDR18V +3.3V +12V Current CPU Temperature Curren t CPU FAN Speed Curren t POWER FAN Speed Curr ent SYST EM FAN Speed CPU Warning Temperature CPU FAN Fail Wa rning POWER FAN Fail Warning SYST EM FAN Fail War ning CPU Sm art FAN Co ntrol CPU FAN PIN Ty pe OK OK OK OK 33o C 4687 RPM 0 RPM 0 RPM [Disabled] [Disabled] [Disabled] [Disabled] [Enabled] [3 PIN]
CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software PC H ealth Status
Current Voltage(V) Vcore / DDR18V / +3.3V / +12V ( Current CPU Temperature (
Current CPU/POWER/SYSTEM FAN Speed (RPM) (
CPU / Disabled 60oC / 140oF 70oC / 158oF 80oC / 176oF 90oC / 194oF Enabled Disabled /
CPU Warning Temperature (CPU

CPU CPU CPU CPU CPU

( 60oC / 140oF 70oC / 158oF 80oC / 176oF 90oC / 194oF )
CPU/POWER/ SYSEM FAN Fail Warni ng (CPU /
CPU Smart FAN Control (CPU
Disabled Enabled a. CPU b. CPU c. CPU CPU 65oC CPU o 41 C 65oC 40oC CPU

( CPU )

- 42 -

CPU FAN PIN Type

3 PIN 4 PIN CPU CPU FAN PIN Ty pe 3 pin ( CPU FAN PIN Ty pe 4 pin CPU )
MB Intelligent Tweaker(M.I.T.) (
[15X] [Disabled] [Disabled] 200 [Auto] 533 [Normal] [Normal] [Normal] 1.40 00V
Item Help Menu Level} Set CPU Ratio if CPU Ratio is unclocked
CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software MB In telligent Tweaker(M. I.T.) CPU Clock Ratio C.I. A.2 CPU Host Clock Control CPU Ho st Frequency (Mhz) Memory Frequency For Memory Frequency (Mhz) DIMM O verVoltage Control PCI-E O verVoltage Control CPU Voltage Co ntrol Normal CPU Vcore

CPU Clock Ratio

<Y> <Enter>

- 45 -
2-10 Set Supervisor/User Password (
CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software } } } } } } } Stan dard CM OS Features Advanc ed BIOS Fe atures IntegratedPeripherals Power Manag ement Setup PnP/PCI Configur ations Enter Pa ssword: PC H ealth Status MB In telligent Tweaker(M. I.T.) Load Fail-Safe Defaults Load Optimized Defaults Set Su pervisor Pa ssword Set User Password Save & Exit Setup Exit Without Saving higf: Selec t Item F10: Save & Exit Setup Change/Set/Dis able Password

8 Enter BIOS

Enter BIOS PASSWORDDISABLED
Superv is or Superv isor "Setup" User User SYSTEM CMOSSETUP Superv isor Adv anced BIOS Features User Superv is or USER Passw ord CMOSSETUP Passw ord Check BIOS Adv anced BIOS Features Passw ord Check CMOSSETUP Superv isor

- 46 -

2-11 Save & Exit Setup (
CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software Stan dard CM OS Features Load Fail-Safe Defaults Advanc ed BIOS Fe atures Load Optimized Defaults IntegratedPeripherals Set Su pervisor Pa ssword Power Manag ement Setup Set User Password PnP/PCI Configur ations Save & Exit Setup Save to CMOS an d EXITExit Without Saving (Y/N)? Y PC H ealth Status MB In telligent Tweaker(M. I.T.) higf: Selec t Item F10: Save & Exit Setup Save & Exit Setup
<Y> <Enter> <N> <Esc>

SetupUtility

2-12 Exit Without Saving (
} } } } } } } Stan dard CM OS Features Advanc ed BIOS Fe atures IntegratedPeripherals Power Manag ement Setup PnP/PCI Configur ations PC H ealth Status MB In telligent Tweaker(M. I.T.)
CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software Load Fail-Safe Defaults Load Optimized Defaults Set Su pervisor Pa ssword Set User Password Quit Without Saving (Y/N)?& Exit Setup Save N Exit Without Saving higf: Selec t Item F10: Save & Exit Setup Abandon all Data

<N> <Esc>

- 47 -

- 48 -

Windows XP ( Run.exe )
Xpress Install Install Xpress Install

Xpress Install

Windows XP Windows Service Pack \ ( USB 2.0

USB2.0 \ "?" )

- 49 -

Install

- 50 -

- 51 -

- 52 -
U-PLUS D.P.S. (Universal Plus Dual Power System)
U-Plus Dual Power System Intel LGA775 Pentium 4 CPU C PU
M.I.T. (Motherboard Intelligent Tweaker)
M.I.T. BIOS M.I.T. M.I.T. BI OS C.I.A.2 M.I.B.2
C.I.A.2 (CPU Intelligent Accelerator 2)
C.I.A.2 CPU C. I. A. 2 CPU C PU
M.I.B.2 (Memory Intelligent Booster 2)

M.I.B.2 10%

S.O.S. (System Overclock Saver)

S.O.S. S.O.S. CMOS

Download Center
Download Center Download Center BIOS
C.O.M. (Corporate Online Management)
C.O.M. MIS C.O.M. ) BIOS - 53 MIS ( CPU

4-1-1 Xpress Recovery

Xpress Recovery?

1. 2. 3. 4. 5. 6. Ghost

FAT16 IDE1 HPA Master IDE (Partition) (Partition) NTFS

Xpress Recovery

1. CD-ROM ( : BIOS "Advanced BIOS Feature" Xpress Rcovery F9
. Verifying DMI Pool Data Boot from CD:
) CD-ROM "Boot from CD:" CD-ROM

Boot from CD:

Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technology CO. , Ltd.
1. Execute Backup Utility 2. Execute Restore Utility 3. Remove Backup Image 4. Set Password 5. Exit and Restart

Build 2011

- 54 -
(POST) F9 ( (power on self test)
Award Modular BIOS v6.00PG, An Energy Star Al ly Copyright (C) 1984-2004, Award Software, Inc. Intel 865PE AGPSet BIOS for 8IPE1000MT F1 Check System Health OK. Press DEL to enter SETUP / Q-Flash, F9 For Xpress Recovery 08/16/2002-I845GE-6A69YG01C-00

F9 For Xpress Recovery

CD-ROM F9

- 55 -

1.Execute Backup Utility: ! Press B to Backup your System or Esc to Exit
" " (POST) F9"

"

2.Execute Restore Utility: ! This program will recover your system to factory default.
Press R to restore your system back to factory default or press Esc to exit
3.Remove Backup Image: ! Remove backup image. Are you sure? (Y/N)
4.Set Password: ! Please input a 4-16 character long password (a-z or 0-9) or press Esc to exit
Xpress Recovery Xpress Recovery Set Password Enter New Password Confirm Password

5. Exit and Restart:

- 56 -

4-1-2 BIOS

A. BIOS (Dual BIOS) ?
BIOS BIOS (Backup BIOS)" BIOS BIOS BIOS BIOS " BIOS(Main BIOS)" "

Q-Flash

BIOS Award BIOS POST Power On Self Test CMOS SETUP <F8> Flash Utility

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software } } } } } } } Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving higf: Select Item F10: Save & Exit Setup Time, Date, Hard Disk Type.
ESC: Quit F8: Dual BIOS/Q-Flash

Dual BIOS

Dual BIOS Utility V1.33 Boot From.. Main ROM Type/Size. Backup ROM Type/Size.. Wide Range Protection Boot From Auto Recovery Halt On Error Keep DMI Data Main Bios SST 49LF004A SST 49LF004A Disable Main Bios Enable Disable Enable 512K 512K
Copy Main ROM Data to Backup Load Default Settings Save Settings to CMOS Q-Flash Utility Update Main BIOS from Floppy Update Backup BIOS from Floppy Save Main BIOS to Floppy Save Backup BIOS to Floppy PgDn/PgUp: Modify hi: Move ESC: Reset F10: Power Off

- 57 -

c. Dual BIOS Wide Range Protection: Disable( ) Enable 1 BIOS Checksum Error Reset) Wide Range Protection 2 ( :SCSI ROM BIOS , Boot From : Main BIOS( 1 ) Backup BIOS ROM BIOS

Failure ( Enabled

:Update ESCD Failure BIOS

BIOS BIOS BIOS

BIOS BIOS 2 BIOS BIOS BIOS , Auto Recovery : Enable( ) Disable BIOS BIOS Checksum Failure BIOS Checksum Failure BIOS { BIOS Power Management Setup ACPI Suspend Type Suspend to RAM Auto Recovery Enable } Halt On Error : Disable( ) Enable Halt On Error Enable CHECKSUM ERROR MAIN BIOS IS WIDE RANGE PROTECTION ERROR ; : Auto Recovery Disabled <or the other key to continue.> Auto Recovery Enabled <or the other key to Auto Recover.> Keep DMI Data : Enable( ) Disable Enable: BIOS DMI ( Enable) Disable: BIOS DMI Copy Main ROM Data to Backup ( BIOS "Copy Backup ROM Data to Main" : BIOS Recovery Main to Backup Main BIOS Backup BIOS BIOS Recovery Backup to Main Backup BIOS Main BIOS , Load Default Settings Dual BIOS Save Settings to CMOS CMOS

- 58 -

Q-FlashTM
Q-FlashTM BIOS Q-FlashTM DOS Windows BIOS BIOS BIOS Q-FlashTM BIOS Q-FlashTM BIOS

Q-FlashTM 1. 2. 3.

BIOS BIOS BIOS Del BIOS BIOS F1 F12 F1 F4 F4 BIOS F8 BIOS (.Fxx 8KNXPU.Fba)

BIOS BIOS

BIOS Ultra Q-Flash BIOS

BIOS Fa3

GA-8KNXP
Q-Flash Dual BIOS Q-Flash Fba
Award Modular BIOS v6.00PG, An Energy Star Ally Copyright (C) 1984-2003, Award Software, Inc.
Intel i875P AGPset BIOS for 8KNXP Ultra Fa3 Check System Health OK , VCore = 1.5250 Main Processor : Intel Pentium(R) 4 1.6GHz (133x12) <CPUID : 0F27 Patch ID : 0027> Memory Testing : 131072K OK Memory Frequency 266 MHz in Single Channel Primary Master : FUJITSU MPE3170AT ED-03-08 Primary Slave : None Secondary Master : CREATIVEDVD-RM DVD1242E BC101 Secondary Slave : None
Press DEL to enter SETUP / Dual BIOS / Q-Flash / F9 For Xpress Recovery 08/07/2003-i875P-6A79BG03C-00

- 59 -

1 Del BIOS Q-Flash
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software } } } } } } } Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) Select Language Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving F3: Change Language F10: Save & Exit Setup Time, Date, Hard Disk Type.

Dual BIOS/Q-Flash

Dual BIOS Utility Boot From... Main Bios Main ROM Type/Size..SST 49LF004A Backup ROM Type/Size..SST 49LF004A

512K 512K

Wide Range Protection Disable Boot From Main Bios Auto Recovery Enable Halt On Error Disable Copy Main ROM Data to Backup Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main BIOS from Floppy Load Backup BIOS from Floppy Save Main BIOS to Floppy Save Backup BIOS to Floppy Enter : Run hi:Move ESC:Reset

F10:Power Off

BIOS BIOS ROM Q-Flash Enter Dual BIOS/Q-Flash Enter

- 60 -

Q-Flash BIOS BIOS " " BIOS
"Load Main BIOS from Floppy" BIOS BIOS to Floppy"

Enter "Save Main

Enter BIOS

8KNXPU.Fba BIOS

Wide Range Protection Disable 1 file(s) found Boot From Main Bios 8KNXPU.Fba 512K Auto Recovery Enable Halt On Error Disable Total sizeCopy Main ROM Data to Backup911.50K : 1.39M Free size : F5 : Refresh DEL : Load Default SettingsDelete Save Settings to CMOS Q-Flash Utility Load Main BIOS from Floppy Load Backup BIOS from Floppy Save Main BIOS to Floppy Save Backup BIOS to Floppy Enter : Run hi:Move ESC:Reset F10:Power Off

Dual BIOS Utility Boot From... Main Bios Main ROM Type/Size..SST 49LF004A Backup ROM Type/Size..SST 49LF004A Wide Range Protection Disable Boot From Main Bios Reading BIOS file from floppy. Auto Recovery Enable >>>>>>>>>>>>>>. Halt On Error Disable Copy Main ROM Data to Backup Don't Turn Off Power or Reset System Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main BIOS from Floppy Load Backup BIOS from Floppy Save Main BIOS to Floppy Save Backup BIOS to Floppy Enter : Run hi:Move ESC:Reset

- 61 -

Wide Range Protection Disable Boot From Main Bios Auto Recovery Enable !! Copy BIOS completed - Pass !! Halt On Error Disable Copy Main ROM Data to continue Please press any key Backup Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main BIOS from Floppy Load Backup BIOS from Floppy Save Main BIOS to Floppy Save Backup BIOS to Floppy Enter : Run hi:Move ESC:Reset F10:Power Off

1~4 BIOS (Backup BIOS)

Wide Range Protection Disable Boot From Main Bios Auto Recovery Enable Are you sure to RESET ? Halt On Error Disable Copy Main ROM Data to Backup [Enter] to continure or [Esc] to abort. Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main BIOS from Floppy Load Backup BIOS from Floppy Save Main BIOS to Floppy Save Backup BIOS to Floppy Enter : Run hi:Move ESC:Reset F10:Power Off

BIOS Fba

Intel i875P AGPset BIOS for 8KNXP Ultra Fba Check System Health OK , VCore = 1.5250 Main Processor : Intel Pentium(R) 4 1.6GHz (133x12) <CPUID : 0F27 Patch ID : 0027> Memory Testing : 131072K OK Memory Frequency 266 MHz in Single Channel Primary Master : FUJITSU MPE3170AT ED-03-08 Primary Slave : None Secondary Master : CREATIVEDVD-RM DVD1242E BC101 Secondary Slave : None
Press DEL to enter SETUP / Dual BIOS / Q-Flash / F9 For Xpress Recovery 09/23/2003-i875P-6A79BG03C-00

- 62 -

6. BIOS

Del BIOS BIOS BIOS

Load Fail-Safe Defaults BIOS
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software } } } } } } } Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Select Language Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Load Fail-Safe Defaults (Y/N)? Y Set User Password Save & Exit Setup Exit Without Saving F3: Change Language F10: Save & Exit Setup Time, Date, Hard Disk Type.

CMOS CMOS

Del BIOS
"Load Fail-Safe Defaults" BIOS
BIOS BIOS Defaults" BIOS "Load Fail-Safe Defaults"( "Load BIOS CMOS

- 74 -

IDE2 F_USB(Front USB)

USB Over Current

Award AMI BIOS: * 11
AMI BIOS AWARD BIOS: CMOS BIOS
ECC 64k CPU Gate A20 CPU ROM CMOS

RAID BIOS

IDE3 IDE4
IDE3 IDE4 BIOS 1. Advanced BIOS features--> (SATA)/RAID/SCSI boot order: "RAID" 2. Advanced BIOS features--> First boot device: "SCSI" 3. Integrated Peripherals--> Onboard H/W ATA/RAID: "enable" RAID (RAID ATA) RAID Integrated Peripherals--> RAID controller function : "RAID" "ATA" IDE IDE/ SCSI/ RAID Card BIOS BIOS 1. Advanced BIOS features--> (SATA)/RAID/SCSI boot order: "SCSI" 2. Advanced BIOS features--> First boot device: "SCSI"

- 75 -

- 76 -

- 77 -

1. 2. 3. 2003

52 ( ) 1 ( ) 1 ( )

3 "SN" 010471933180703021SN0412030006 SN0140002546 "SN"

a. b. c. d. e. f.

11:00 ~ (

9:00 ) 14

~ 1:00 ~ 5:00 (

(02)2358-7250

9:00 ~ 12:00 ) 215 (03)439-6333 ext.1913 (03)403-0165

9:00 ) 278

(03)572-5747
11:00 ~ ( 81 (04)2301-5511

9:00 ) (

11:00 ~ 145 (06)221-7374
11:00 ~ 51-1 (07)235-4340

9:00 )

http://service.gigabyte.com.tw GA-8I915G Pro - 78 -
6 +886 (2) 8912-4888 +886 (2) 8912-4003 http://tw.giga-byte.com/TechSupport/ServiceCenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp : http://www.gigabyte.com.tw G.B.T. INC. 17358 Railroad St, City of Industry, CA 91748. +1 (626) 854-9338 +1 (626) 854-9339 http://www.giga-byte.com/TechSupport/ServiceCenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp http://www.giga-byte.com G.B.T. TECHNOLOGY TRADING GMBH Friedrich-Ebert-Damm Hamburg +49-40-2533040 (Sales) +49-1803-428468 (Tech.) +49-40-25492343 (Sales) +49-1803-428329 (Tech.)
NIPPON GIGA-BYTE CORPORATION http://www.gigabyte.co.jp GIGA-BYTE SINGAPORE PTE. LTD. http://tw.giga-byte.com/TechSupport/ServiceCenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp G.B.T. TECH. CO., LTD. Unit 13 Avant Business Centre 3 Third Avenue, Denbigh West Bletchley Milton Keynes, MK1 1DR, UK, England +44-1908-362700 +44-1908-362709 http://uk.giga-byte.com/TechSupport/ServiceCenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp http://uk.giga-byte.com GIGA-BYTE TECHNOLOGY B.V. +NL Tech.Support 0900-GIGABYTE (0900-44422983) BE Tech.Support 0900-84034 +http://nz.giga-byte.com/TechSupport/ServiceCenter.htm