Gorenje OGB 30-150 EL
Here you can find all about Gorenje OGB 30-150 EL like manual and other informations. For example: review.
Gorenje OGB 30-150 EL manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Gorenje OGB 30-150 EL please write about it to help other people. [ Report abuse or wrong photo | Share your Gorenje OGB 30-150 EL photo ]
Gorenje OGB 30-150 EL, size: 322 KB
Gorenje OGB 30-150 EL
User reviews and opinions
|Col Wheeler||8:19am on Saturday, October 30th, 2010|
|I came into Vanns on a whim on the iPads launch day not really expecting to see any there still available. I replaced my first-gen iPod Touch, which I had since they first came out a few years ago, with this new beast of a device. First of all.|
|jet||10:23am on Friday, October 8th, 2010|
|Awesome game player, and has replaced my laptop but I do not have to need for business and so I do not know about how those work. Great for traveling,...|
|FRiviR2||11:25pm on Saturday, July 17th, 2010|
|This product is EXACTLY what I wanted. It fits perfectly and it got here very fast. The item was all that the description said it would be! I am very pleased with this product and would recommend it to friends.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
WARNUNG: Vor jedem Eingriff in sein Inneres muss der Warmwasserbereiter verbindlich aus dem Elektronetz ausgeschaltet werden.
, . RUS
. , . . , , .
. . , , . ryry . 8.
  /   [~] 751) 
40 2) [///24]
/ g I IP 194 0,82 0,91 1,11
1) 15 2) 65 20, DIN 44532 12
. - , -. . , - . . , , . . , . , , . . - , 0,1 . , . , . , . , , . , , , , 3 . 14. ( ) . , , . 13
: 1 -
() 2 - 3 - 4 - 5 -
() 6 - 7 - - -
, . , 0,5 (5 ). 0,5 (5 ), . . . , . ! () . . , . . , . . , , , . :
. , 25 75. ; ; 55, , . . , . , : , *. 10. , , . . , . . . , . , . . . ryry , . . , , , , . . , . 15
: , , !
Dear buyer, we thank you for purchase of our product.
PLEASE READ THE INSTRUCTIONS THOROUGHLY PRIOR TO THE INSTALLATION AND FIRST USE OF THE WATER HEATER.
This water heater has been manufactured in compliance with the relevant standards and tested by the relevant authorities as indicated by the Safety Certificate and the Electromagnetic Compatibility Certificate. Its basic technical properties are stated upon the nameplate, glued between the connection pipes. The water heater may be connected to water and electric power supply only by a qualified specialist. The reach in its inside due to the repair or removal of limestone and checking and replacement of anti-corrosion protection anode may be performed only by an authorised service workshop.
The water heater should be installed as close as possible to the points of use to avoid heat dispersion along the pipes. It should be fastened to the wall with appropriate bolts with minimum diameter of 8 mm. In case the wall in question cannot support the weight three times that of the heater filled with water, the relevant section of the wall (where the heater is to be installed) must be suitably reinforced. OTG water heater must be mounted to the wall in the upright position.
TECHNICAL PROPERTIES OF THE APPLIANCE
Type Model Volume [l] Rated pressure [MPa] Weight / Filled with water [kg] Anti-corrosion protection of tank Connected power [W] Voltage [V~] Degree of protection Grad des Apparatschutzes Heating time to 75C 1) [h] Quantity of mixed water at 40C [l] Energy consumption2) [kWh/24h]
Enameled / Mg Anode I IP 194 0,82 0,91 1,11
1) Time for heating of the whole volume of heater with electric immersion heater by entering temperature of cold water from water supply 15C. 2) Energy consumption to maintain stable temperature of water in the water heater 65C at surrounding temperature 20C, measured according to DIN 44532.
Dimensions of the water heater for installation and connection [mm]
CONNECTION TO THE WATER SUPPLY
The water heater connections for the in-flowing and out-flowing water are colour-coded. The connection for the supply of cold water is coloured blue, while the hot water outlet is coloured red. The water heater may be connected to the water supply in two ways. The closed-circuit pressure system enables several points of use, while the open-circuit gravity system enables a single point of use only. The mixer taps must also be purchased in accordance with the selected installation mode. The open-circuit gravity system requires the installation of a non-return valve in order to prevent the water from draining out of the tank in the event of the water supply running dry or being shut down. This installation mode requires the use of an instantaneous mixer tap. As the heating of water expands its volume, this causes the tap to drip. The dripping cannot be stopped by tightening it further; on the contrary, the tightening can only damage the tap. The closed-circuit pressure system requires the use of pressure mixer taps. For safety reasons the supply pipe must be fitted with a return safety valve or alternatively, a valve of the safety class that prevents the pressure in the tank from exceeding the nominal pressure by more than 0.1 MPa. The heating of water in the heater causes the pressure in the tank to increase to the level set by the safety valve. As the water cannot return to the water supply system, this can result in the dripping from the outlet of the safety valve. The drip can be piped to the drain by installing a catching unit just below the safety valve. The drain installed below the safety valve outlet must be piped down vertically and located in the environment that is free from the onset of freezing conditions. In case the existing plumbing does not enable you to pipe the dripping water from the return safety valve into the drain, you can avoid the dripping by installing a 3-litre expansion tank on the inlet water pipe of the boiler. You should ensure that the return safety valve is functioning properly by checking it on a regular basis i.e. every 14 days. To check the valve, you should open the outlet of the return safety valve by turning the handle or unscrewing the nut of the valve (depending on the type of the valve). The valve is operating properly if the water comes out of the nozzle when the outlet is open. 17
Closed (pressure) system Legend: 1- Return safety valve 2- Bimetallic fuse 3- Non-return valve 4- Pressure reduction valve 5- Closing valve
Open (non-pressure) system 6- Checking fitting 7- Funnel with outlet connection H - Cold water T - Hot water
Between the water heater and return safety valve no closing valve may be built-in because with it the function of return safety valve would be impeded. The water heater may be connected to the water network in the house without reduction valve if the pressure in the network is lower than 0.5 MPa (5 bar). If the pressure exceeds 0.5 MPa (5 bar), a reduction valve must be installed. Prior to the electric connection the water heater must obligatorily be filled with water. By first filling the tap for the hot water upon the mixing tap must be opened. When the heater is filled with water, the water starts to run through the outlet pipe of the mixing tap.
The power lead must be fitted to the water heater prior to being connected to the power supply. In order to do this you should first unscrew the protective cover off the water heater. The water heater must be connected to the power supply in accordance with the requirements set out in the relevant standards applying to electrical installations. For safety reasons a switch should be installed on the lead connecting the heater to the power grid, i.e. a switch disconnecting both power supply poles with the minimum of 3 mm distance between the open contacts.
Legend: 1 - Thermostat 2 - Temperature safety device 3 - Heating element 4 - Light indicator 5 - Connector L - Phase conductor N - Neutral conductor - Earth conductor Electric installation
USE AND MAINTENANCE
After the connection to water and electric network the heater is ready for use. By turning the knob of thermostat at the front side of the protecting cover, the wished temperature of water between 25C and 75C is chosen. We recommend the adjustment of the knob to the position E. Such an adjustment is the most economic; with it the temperature of water shall be about 55C, the excretion of lime-stone and thermal loss shall be smaller as by adjustment to higher temperature. The operation of electric immersion heaters is shown by pilot light. On the perimeter of the water heater there is a built-in thermometer which is showing the temperature of water. When the heater shall not be used during a longer time, its contents must be protected against freezing so that the power supply (electricity) shall not be switched off, but the thermostat knob shall be adjusted to the position *. With this adjustment the heater shall maintain the water temperature by about 10C. But when the heater is switched-off from the electric network, at risk for freezing, the water must be emptied from it. Before draining water heater should be disconnected from main supply. Than hot water valves on taps should be opened. Water heater is to be drained through inlet connection. For this purpose it is recommendable to put special fitting or a drain valve between inlet connection of water heater and safety valve. If this is not the case water can be drained directly through safety valve by putting the lever or screw cap of safety valve to Test position. After draining through inlet pipe there is small quantity of residual water which is to be drained by taking off of heating flange. The outside of the water heater is cleaned by a mild solution of detergent. The solvents or rough cleaning means should not be used. By regular service check of impeccable operation must be assured and a long lifetime of the water heater. The first check must be performed by an authorised service workshop after about two years after the first connection. At check, the use of anti-corrosion protecting anode is checked and if necessary lime stone must be cleaned which with regard to the quality, quantity and temperature of the water used is gathered in the inside of the water heater. Service workshop shall after check recommend also the date of next check of the water heater with regard to the established results. Never try to repair any possible faults of the water heater by yourself, but inform about it the nearest authorised service workshop.
MS-194AS Speakers XL-MP60 EDI96150W RD-JT40 Review DPX-400 Flix 10 HCS 455 MX-305 Stacktraxx GM530 Stick IC-02A HR1372 1500G RL44qeus 78-4501 941MP RSJ1kers Nikon F65 SDE-3000 PHC-Z10 PI6500E CDX-GT130 Guide PRO KDL-32EX40B C740I KX-TG2000B Ultimate Ws PRO HFH5606 32HL57 Power CL7100 DEH-1050E Classic KX-TCD200SP DB178RMP PSC 2350 Clue DVD KX-TG1100PD DB125 CDU-711 8I845GVM-RZ Kxtg6513 C4205 8550MFP Sdrh85 BJ-30 VR636 DSC-H9 DX-7355 MS-6570 563A-CB563c-aa- Life V-AMP PRO Phaser 6180 HP2051 Model 2223 Futura 4010 XGA 350 Nuvi 660 FU-60SE-K Einhell H126 XD1170D Wixe 127 SE-70 TX-26LX1F MC-500mkii Lavamat1045S D5300 RF-3700 7 2 BCA-452K VGN-NS11z S VSX-409RDS EL-531GH CDX-GT23 WF-T502TH E-V 66 DPP-MS300E DSC- W110 HL-5040 CR-H227I NV-10 LD220 Switch LX700-22S MMT-8 TLA-01901C 5970 VFD HP 49G Yamaha MDF3 UR19A KDC-W5141U MCD177 12 FS4000US Sedan 11 CDX-GT33W Eurocombo 99
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101