Govideo DV1140 Manual
Govideo DV1140 - Product Manual, size: 1.3 MB
Govideo DV1140 Quick Reference
Here you can find all about Govideo DV1140 like manual and other informations. For example: review.
Govideo DV1140 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Govideo DV1140 please write about it to help other people. [ Report abuse or wrong photo | Share your Govideo DV1140 photo ]
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Unpack Your DV1140
DVD+VCR Remote control 1.5V AAA batteries (2) RF coaxial cable RCA Audio/Video cable Users guide Read Me First/Quick Reference Guide Registration card
DV1140 COPY POWER LINE 2 IN REW PLAY FF STOP PAUSE DVD EJECT VCR EJECT CH REC DVD/VCR VIDEO L - AUDIO - R
1 Remove battery cover. 2 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+/-). 3 Replace cover.
RCA Audio/Video Cable
RF Coaxial Cable
:: Basic Connections
To get started, you will need to connect the DVD+VCR to your TV. The DVD+VCR clock will be set automatically. 1 Connect Antenna/Cable Connect your antenna or basic cable TV jack to the ANT. IN jack on the rear panel. See the Users Guide for cable box/satellite receiver connections. 2 Connect TV Choose one of the following methods: a. RF Out Connection Using the supplied RF coaxial cable, connect the RF OUT jack on the back panel of the DVD+VCR to your TVs Antenna Input, or. b. Line Out Connection Using the supplied RCA Audio/Video cable (with the red, white, and yellow connectors), connect the DVD/VCR OUT jacks on the back panel of the DVD+VCR to your TVs Audio/Video In jacks. 3 Plug In Plug in the DVD+VCR. 4 Turn On the DVD+VCR Press the POWER button on the remote control or front panel of the unit. 5 Turn On Your TV Press the POWER button on your TV. 6 Set Your TV to View the DVD+VCR Turn your TV to channel 3 to view the DVD+VCR. If you are using the Line Connection method, set your TV to the appropriate Line or Video input. You must use either the RF Out or Line Out connection between your TV and DVD+VCR, even if you plan to use the S-Video or Component Video Output for improved DVD picture quality. The S-Video and Component Video Outputs are for DVD playback only! See the User's Guide for advanced connections.
Antenna/Cable TV Jack
Rear Panel of DVD+VCR
RCA A/V Cables
A/V IN ANT IN
Our Award-Winning Customer Service Professionals are Ready to Help!
STOP PRODUCT TO THE STORE!
DO NOT RETURN THIS
For Fast, Friendly Service
For a Prompt Reply
Than k You!
CD-ROM, CD+G, and CD-i discs cannot be played on this DVD player.
Or Check Our Website!
For the Latest FAQs
:: Basic Controls
Two Decks, One Set of Controls!
DVD Button - Press to control the DVD deck. All deck control keys and blue labeled buttons will operate the DVD player.
VCR Button - Press to control the VCR deck. All deck control keys and red labeled buttons will operate the VCR.
:: Basic Disc Playback
DVD EJECT DVD EJECT PLAY
L - AUDIO - R
LINE 2 IN
To Play a DVD or CD
Press EJECT on the remote control or DVD EJECT on the front panel to open the disc drawer. The DVD+VCR will power on automatically when you open the disc drawer. Place the disc in the drawer with the label side facing up. If the disc has two sides, place the disc with the desired side facing up. Press EJECT or DVD EJECT again to close the disc drawer. Press PLAY to begin playback. Many discs will begin playback automatically when the disc drawer closes. If the DVD has a disc menu, or more than one title, the disc menu may appear. If so, press / and / to highlight menu items, then press ENTER to make selections.
:: Basic VCR Playback
To Play a VHS Tape
Insert a VHS tape into the VCR deck. The DVD+VCR will power on automatically when you insert the tape. Press PLAY to begin playback. If the tape is missing the record safety tab and Auto Play is turned on, the tape will begin playing automatically.
2004 GoVideo. All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERS MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. Follow all instructions. - All operating and use instructions should be followed. 5. Do not use this product near water. For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool; and other areas located near water. 6. Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product. 11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart/product combination to avoid injury from tip-over. 13. Unplug this product during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped.
The control buttons on the front panel of the DVD+VCR can be switched off so that your DVD+VCR can only be operated using the remote control. Press CHILD LOCK on the remote control to enable LOCK function, SAFE appears in the display window. To disable the LOCK function, press CHILD LOCK on the remote control until OFF appears in the display window.
The DVD deck is selected. Lights when a disc is loaded in the DVD deck. Flashes when there is no disc. Indicates when Progressive scan is active. Indicates repeat mode. Indicates when the DVD+VCR is locked. A timer recording is programmed or in progress (VCR deck only).
A cassette is in the VCR deck.
The VCR deck is selected.
VCR REC PM TV
Lights when TV mode is active (See page 22.)
Indicates PM time. (AM is not displayed.)
DVD+VCR is Recording. (VCR deck only) Indicates total playing time, elapsed time, remaining time or current deck status (Playback, Pause, etc).
DVD & VCR select buttons
Sets the remote control to operate either the DVD deck or the VCR deck.
- Opens and closes the disc tray. - Ejects the tape in the VCR deck. Selects the VCR decks source (Tuner, LINE 1, or LINE 2).
Turns the DVD+VCR ON and OFF.
Switches between your TV tuner and the DVD+VCR tuner.
Accesses the on-screen display. Switches among the clock, tape counter and tape remaining modes on the display.
ENTER - Confirms menu selections. - Displays functions on the TV screen. DISC MENU
Opens menu on a DVD disc.
b/B/v/V (left/right/up/down) - Selects menu items - CH(v/V): Selects channels on the
VCR. - TRK(+/-): Manually adjusts tracking.
Exits the setup menu.
FF > (M)
DVD: Skips to NEXT chapter/track. Press and hold for fast-forward search. VCR: Fast forwards the tape during Stop mode or scans forward in Play mode.
Opens or exits DVD setup menu and VCR menu.
Displays the discs Title, if available.
PLAY ( N )
Pauses playback or recording temporarily. Press repeatedly for frameby-frame playback.
DVD: Skips to start of current chapter/track or to previous chapter/track. Press and hold for fast reverse search. VCR: Rewinds the tape during Stop mode or scans backward in Play mode.
Records normally or activates Instant Timer Recording.
Selects or exits Program menu.
Removes a track number on the Program menu or a mark on the MARK SEARCH menu. Also clears VCR tape counter settings.
0-9 number buttons
Selects channels or menu items.
Selects DVD audio languages.
Selects a DVD camera angle if available.
Selects available subtitle languages.
Repeats chapters, tracks, titles or all.
Magnifies video image.
Disables front panel buttons.
Marks any point during playback.
- Plays tracks in random order. - Scans ahead 30 seconds during VHS playback.
Displays last channel viewed.
- Repeats playback between two points. - Selects recording speed
Displays MARK SEARCH menu.
ote The remote control uses one set of playback buttons to operate both decks: To use the VCR, first press the VCR button. To use the DVD, first press the DVD button.
VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, Another VCR). DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs. COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD OUT) Connect to a TV with Y Pb Pr inputs. AUDIO OUT (Left/Right) (DVD OUT) Connect to a TV, amplifier, receiver, or stereo system.
AC Power Cord Plug into the power source.
S-VIDEO OUT (DVD OUT) Connect to a S-Video Input on TV. DIGITAL AUDIO OUT (COAXIAL) (DVD OUT) Connect to digital (coaxial) audio equipment.
ANT.IN (ANTENNA INPUT) Connect the VHF/UHF/CATV antenna to this terminal.
RF. OUT(DVD/VCR OUT) Connect to a TV with RF coaxial inputs.
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
Without Cable Box Tips
Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD+VCR. Use connections described on pages 11-13. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. For better sound reproduction, connect the DVD+VCRs DVD/VCR AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See Optional, Preferred TV Connections on pages 12-13. If your cable wire is connected to your TV without a converter or descrambler box, unscrew the wire from your TV and attach it to the ANT.IN jack on the DVD+VCR. Use the supplied round coaxial cable to connect between the DVD+VCRs RF.OUT jack and the 75 ohm antenna input jack on the TV. With this connection, you can receive all midband, super band, and hyperband channels.
Component Video / Progressive Scan connection
remote control to change the RF output channel (CH 03 or CH 04). 4. Turn off the DVD+VCR.
If your television is a high-definition or digital ready television, you may take advantage of the DVD+VCRs progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD+VCR. Connect the COMPONENT / PROGRESSIVE SCAN VIDEO OUT jacks on the DVD+VCR to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C). Connect the Left and Right AUDIO OUT jacks of the DVD+VCR to the audio left/right in jacks on the TV (A2) using the supplied audio cables.
Connect the DVD/VCR VIDEO OUT jack on the DVD+VCR to the video in jack on the TV using the supplied video cable (V).
the Left and Right DVD/VCR AUDIO 2 Connect the TV (A1) usingthe audio left/right inOUT jacks on DVD+VCR to jacks on the the supplied audio cables. ote If you use this connection, set the TVs source selector to VIDEO.
Rear of TV
ANTENNA INPUT AUDIO INPUT VIDEO INPUT
otes Set Progressive Scan to On in the setup menu for progressive scan signal, see page 18. When you use Component Video signal, set Progressive Scan to Off in the setup menu. Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack).
COMPONENT VIDEO INPUT AUDIO INPUT S-VIDEO INPUT
Rear of DVD+VCR Rear of DVD+VCR
Connections (Continued) Optional, Preferred TV Connections (Continued)
ote You can ONLY listen to DVD playback using COAXIAL (X) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jacks. (See page 12.) Rear of DVD+VCR
Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jacks on your amplifier, receiver, or stereo system using the supplied audio cables (A1, A2).
COAXIAL DIGITAL INPUT
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital, MPEG 2, or DTS)
SP CH 4 WABC STEREO PROGRAM DETAILS Home video LENGTH 01:00 TIME REMAINING 00:26 RATING N/A
CH 4 STEREO
OCT 8 , FRI
TAPE SPEED DISPLAY
Shows the current tape speed.
Indicates the function in progress.
Indicates when this unit is playing back tape recorded in Hi-Fi.
Indicates the selected channel (or LINE1, LINE2). STEREO/SAP DISPLAY (MONO is not displayed) Shows the type of audio signal received by the VCR tuner.
Shows the current date.
Shows the current time, tape counter and remaining time on the tape.
Home video OCT 8 , FRI
Easy Information Screen (Station ID)
Easy Information Screen (Program details)
Each press of the ENTER button changes the TV screen in the following sequence.
STOP SP CH 4 STEREO
Setting the On-Screen Display
The VCR's on-screen menu system allows you to set the clock, channels, timer recordings, and other setup options.
Follow these steps to access the VCR's on-screen menu system. Press MENU and the MAIN menu will appear.
2:15 PM 0:35:40 REM 1:58
1 desired menu 2 Select thepress ENTER. using the v/V buttons and then
ote MAIN MENU
CLOCK SET (page 16) PROGRAM (page 22) TUNING (page 15) SETUP (page 15)
The function displays will remain on the TV screen for 5 seconds. The clock (or tape counter, tape remaining) mode will continue until you press ENTER. The tape counter and remaining tape length indicator appear only when a cassette is inserted. Also, the remaining tape length indicator appears after any tape operation.
Menus remain on-screen for 3 minutes.
3 Press MENU when finished.
VCR Operation Setup (Continued) Setting the VCR Setup Menu Channel Selection
This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Preparation:
Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 11.
1 Press MENU and the MAIN menu will appear. v/V to V 2 Press ENTER.select the SETUP menu, then press The SETUP menu will appear.
AUTO CHANNEL PROGRAMMING
V /V to a desired option on 3 Press vmenu.choosepress b/B to choose athe B SETUP Then desired setting. FUNCTION OSD
The on-screen display of this DVD+VCR can be turned on or off. FUNCTION OSD can be switched between ON and OFF by pressing b/B.
Auto Tracking The automatic tracking function adjusts the picture to remove snow or streaks. The AUTO TRACKING function works in the following cases:
A tape is played back for the first time. Tape speed (SP, LP, SLP) changes. Streaks or snow appear because of scratches on the tape.
This is useful for skipping commercials or short program segments. 1 Press SKIP during playback mode. The tape will be fast forward picture search through 30 seconds of recording.
The skipping time can be extended by pressing SKIP. Subsequent presses result in advancing the fast forward picture search time by 30-second increments (maximum 3 minutes).
Manual Tracking If noise appears on the screen during playback, press either TRK(+/-) on the remote control or V CH (V/v) on the front panel until the noise on the screen is reduced.
In case of vertical tremble, adjust these controls very carefully. Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds.
Special Effect Playbacks
Special effects playback notes
Horizontal lines (noise bars) will appear on the TV screen. This is normal. The audio is automatically muted during special effect modes, so there is no sound during search. During the high-speed picture search modes, a short period is needed to stabilize tape speed when re-entering the PLAY mode. Slight interference may be observed during this period.
2 When the search is completed, the DVD+VCR will go into playback mode automatically.
Operation with tape (Continued) Normal Recording
Turn on the power of both the DVD+VCR and TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TVs source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TVs source selector to VIDEO.
This DVD+VCR can be programmed to record up to 8 programs within a period of 1 year. For unattended recording, the timer needs to know the channels to be recorded and the starting and ending times.
If you try to set the program timer before setting the clock, PLEASE SET THE CLOCK appears for a moment and then CLOCK menu appears on the TV screen. Set the time and date before proceeding. Make sure a tape is in the DVD+VCR and the safety tab is in place or the tape will be automatically ejected.
1 Insert a video cassette that the safety tab intact. vV 2 Select the desired channel by using CH (v/V).
If you are recording from another source via audio/video input jacks (at the Rear or Front panel), select the LINE1 or LINE2 by pressing INPUT.
Turn on the power of both the DVD+VCR and the TV. Be sure the TV is set to the DVD+VCR output channel (3 or 4). Make sure the TUNING BAND in the TUNING menu is set appropriately (TV or CATV).
Set the desired recording speed (SP or SLP) by pressing SP/SLP.
Shows On-screen as illustrated below when ENTER is pressed.
One or both of the indicators will light, depending on the MTS broadcast.
CH 4 STEREO/SAP
Set the AUDIO MODE option to HI-FI on the SETUP menu.
STEREO Lights up when a stereo broadcast is being received. SAP Lights up when a SAP BILINGUAL broadcast is being received.
If only STEREO appears on the TV screen.
The DVD+VCR can record in stereo onto the VHS Hi-Fi audio tracks when the BROADCAST TYPE option is in the STEREO position. The DVD+VCR will also record mono audio onto the mono audio track.
2 Set the AUDIO OUTPUT option to STEREO position.
(STEREO) POSITION: The left channel sound (L) is heard from the left speaker and the right channel sound (R) is heard from the right speaker. (LEFT) POSITION: The left channel sound (L) is heard from both speakers. (RIGHT) POSITION: The right channel sound (R) is heard from both speakers.
If only SAP appears on the TV screen.
Set the BROADCAST TYPE option to SAP.
If STEREO/SAP appears on the TV screen
Use the BROADCAST TYPE option to select the desired recording mode (STEREO or SAP).
SAP (Second Audio Program) Recording
Some stations transmit a Second Audio Program, which is used for a second language or additional information. When the station broadcasts a Second Audio Program, follow the procedure below to record the SAP. Insert a video cassette with the safety tab intact.
3 Press MENU. and press PLAY 4 Insert a cassetteyour stereo system.( N ). Adjust volume at
Set the BROADCAST TYPE option to SAP (SETUP menu).
Do this only if the SAP appears on the TV screen or you know the program will use the SAP.
3 Press MENU. 4 Set the desired recording speed (SP or SLP) by pressing SP/SLP. channel. 5 Select the desiredscreen. The SAP should appear on the TV z 6 Press REC (z) once x 7 Press STOP (x) to stop recording.
You are now recording the program you see and hear on the TV.
1 CLK/CTR repeatedly display the 2 Presscounter appears on thetoTV screen. realtime want locate 3 At the point that you0:00:00 by later, reset the real-time counter to pressing CLEAR. 4 x Press 5 ishes. STOP (x) when recording or playback fin. 6 Press BACKWARD (.). when the tape counter The tape automatically stops returns to about 0:00:00.
This function allows the time of the remaining tape to be displayed during recording or playback. Press CLK/CTR until the REM indicator displays on the TV screen during recording or playback. ote
The remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape (T-140, T-160, or T-210 etc.).
Begin recording or playing a tape.
Continue to play or record.
Auto power off does not function during regular DVD play mode. (DVD+VCR power stays on.)
Operation with DVD Playing DVD
Playback Setup DVD
Turn on the TV and select the video input source connected to the DVD+VCR. Audio system: Turn on the audio system and select the input source connected to the DVD+VCR. Set the Output Source to DVD as shown in Setting the Output Source on page 6. Z 1 Press OPEN/CLOSE (Z) to open the disc tray. chosen disc 2 Load yourside down. in the tray, with the playback Z Press OPEN/CLOSE (Z) to 3 Playback starts automatically.close the tray. not If playback does start, press PLAY ( N ). In some cases, the disc menu might appear instead.
Moving to another TITLE
To go directly to any title at STOP mode (or RESUME STOP mode), press the number button (0-9).
Moving to another CHAPTER
If a menu screen is displayed
The menu screen may be displayed first after loading a DVD which offers a menu.
When a title on a disc has more than one chapter, you can move to another chapter as follows: Press BACKWARD (.) or FORWARD (>) briefly during playback to return to the beginning of the current chapter or to select the next chapter. Press BACKWARD (.) twice briefly to step back to the previous chapter. To go directly to any chapter during playback, V press DISPLAY. Then, press v/V to select chapter icon. Then, enter the chapter number using the numbered buttons (0-9).
Use the b/B/v/V buttons to select the title/chapter you want to view, then press ENTER to start playback.Press TITLE or DISC MENU to return to the menu screen. stop playback at any other time, press STOP. 4 To exit RESUME STOP mode. press STOP again. This is To RESUME STOP mode, otes If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit password must be entered and/or the disc must be authorized (see LOCK, on page 20). DVDs may have a region code. Your DVD+VCR will not play discs that have a region code different from your DVD+VCR. The region code for this DVD+VCR is 1 (one). Do not keep an image or on-screen displayed for a long time.
1 Press PAUSE/STEP (X) during playback. The DVD+VCR will now go into PAUSE mode. 2 Press BACKWARD (.) or FORWARD (>) during pause mode.
The DVD+VCR will enter SLOW mode.
3 Use BACKWARD (.) or FORWARD (>) to select the required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward). 4 To return to playback, press PLAY ( N ).
1 Press PAUSE/STEP (X) during playback. The DVD+VCR will now go into PAUSE mode. 2 You can advance the picture frame by frame by pressing PAUSE/STEP (X) repeatedly on the remote control. 3 To return to playback, press PLAY ( N ).
ote Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.
1 Press and hold BACKWARD (.) or FORWARD (>) for about two seconds during playback.
The DVD+VCR will now go into SEARCH mode.
2 Press and hold BACKWARD (.) or FORWARD (>) repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). 3 To return to playback, press PLAY ( N ).
When a disc has more than one title, you can move to another title as follows: Press DISPLAY then press v/V to select the title icon. Then press the appropriate numbered button (0-9) to select a title number.
Operation with DVD (Continued) General Features (Continued)
DVD Video Discs - Repeat Chapter/Title/Off 1 To repeat the currently playing chapter, press REPEAT.
The Repeat Chapter icon appears on the TV screen.
The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback or still playback to activate the Zoom function.
The square frame will be displayed in the right bottom of the picture. If no button is pressed for more than 10 seconds, the square frame will disappear. Each press of the ZOOM button changes the TV screen in the sequence shown below. 400% size 1600% size multi zoom mode normal size
2 To repeat the title currently playing, press REPEAT a second time.
The Repeat Title icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
2 Use the b B v V buttons to move through the zoomed picture (400% or 1600%), or to enlarge and reduce the picture size through the multi zoom mode. 3 To resume normal playback, press ZOOM repeatedly until the normal picture appears. otes The zoom function may not work for some DVDs. The zoom function may not work on multi-angle scenes.
To repeat a sequence: 1 Press A-B at your chosen starting point.
A- appears briefly on the TV screen.
2 Press A-B again at your chosen end point (after more than 3 seconds).
A-B appears briefly on the TV screen, and the repeat sequence begins.
3 To cancel the sequence, press A-B.
The Time Search function allows you to start playing at any chosen time on the disc. 1 Press DISPLAY during playback. The on-screen display appears on the screen.
The Time Search box shows the elapsed playing time of the current disc.
You can start playback from a memorized point. Up to nine points can be memorized. To enter a mark, follow these steps. 1 During disc playback, press MARKER when playback reaches the spot that you want to memorize.
The Marker icon will appear on the TV screen briefly.
V 2 Within 10 seconds, use v/V to select the Time Search icon in the on-screen display.
The -:--:-- appears in the Time Search box.
2 Repeat step 1 to enter up to nine Marker points on a disc. To Recall a Marked Scene 1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
3 Within 10 seconds, use the numbered buttons to enter the required start time. Enter hours, minutes and seconds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers.
2 Within 10 seconds, press b/B to select a Marker number that you want to recall. 3 Press ENTER.
Playback will start from the Marked scene.
4 Within 10 seconds, press ENTER.
Playback starts from the selected time on the disc. If you enter an invalid time, playback will continue from the current point.
4 To remove the MARKER SEARCH menu, press SEARCH. To clear a Marked Scene 1 During disc playback, press SEARCH.
Audio CD Menu
2 Pressofv/V toinselect a folder then press ENTER. A list files the folder appears. select a 3 Press (v/V toor ENTER.track then press PLAY N )
Playback starts. During playback, the current tracks elapsed playing time will appear on the display window and menu. Playback will stop at the end of the disc. Tips
Press and hold V to move to the next page. Press and hold v to move to the previous page. If you are in a file list on the MP3/WMA menu and want to return to the Folder list, use the v/V to highlight and press ENTER. On CDs with MP3/WMA and JPEG files, you can switch between the MP3/WMA and JPEG menus. Press TITLE, and either MP3/WMA or JPEG will be highlighted on the top of the menu. Then, use b / B to select MP3/WMA or JPEG and press ENTER.
To stop playback 4 press STOP (x). at any other time, x
Operation with Audio CD and MP3/WMA Discs (Continued)
1 Press PAUSE/STEP (X) during playback. 2 To return to playback, press PLAY ( N ) or press PAUSE/STEP (X) again.
Moving to another Track
2 To return to normal playback, press RANDOM repeatedly until Random disappears on the menu screen.
Press BACKWARD (.) or FORWARD (>) briefly during playback to go to the next track or to return to the beginning of the current track. Press BACKWARD (.) twice briefly to step back to the previous track. To go directly to any track, enter the track number using the numbered buttons (0-9) during playback.
Repeat icon and A appears on the menu screen.
2 Press A-B again at your chosen end point.
The Repeat icon and A - B appears on the menu screen, and the repeat sequence begins.
3 To exit the sequence and return to normal play, press A-B again.
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and TRACK appears on the menu screen.
2 To repeat all tracks on a disc, press REPEAT a second time.
The Repeat icon and ALL appears on the menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The player will now go into SEARCH mode.
2 Press and hold BACKWARD (.) or FORWARD (>) repeatedly to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward).
Search speed and direction are indicated on the menu screen.
3 To exit SEARCH mode, press PLAY ( N ). ote The DVD+VCR mutes sound during search mode of MP3/WMA files.
1 Press RANDOM during playback or when playback is stopped. The unit automatically begins Random Playback and Random appears on the menu screen.
Operation with Photo Disc Viewing a Photo Disc
Moving to Another File
Press. or > once while viewing a picture to advance to the next file or to the previous file.
This DVD+VCR can play discs with JPEG files. Before playing JPEG recordings, read the "Notes on JPEG Recordings" at right.
4 To stop viewing at any other time, press STOP x.
The JPEG menu appears.
Programmed Playback with Audio CD and MP3/WMA Discs
The Program function enables you to store your favorite tracks from any disc in the player memory. Program can contain 99 tracks (Audio CD) or 300 tracks (MP3/WMA).
Repeat Programmed Tracks
To repeat the track currently playing, press REPEAT.
The Repeat icon and TRACK appears on the screen.
The Repeat icon and ALL appears on the screen.
To cancel Repeat mode, press REPEAT a third time.
1 Insert an Audio CD or MP3/WMA disc. 2 Press v V b B to select a track on the List. press v V b 3 Press PROGRAM. Or,press ENTER.B to highlight the Add icon then
Audio CD or MP3/WMA menu will appear. The selected track is added to the program list.
Erasing a Track from Program List
1 Select the track that you wish to erase from the Program list. 2 Press v V b B to highlight the Delete icon then press ENTER. Or, press CLEAR.
The selected track is deleted on the program list.
2-Repeat stepslist. to place additional tracks on the Program 5 Press v V b B to move to the Program list. 6 Press v/V to select the track you want to start playing.
3 Repeat steps 1-2 to delete additional tracks on the Program list.
Erasing the Complete Program List
Press v V b B to highlight the Delete All icon then press ENTER.
All tracks on the program list are deleted.
TRACK 8 TRACK 3 TRACK 12 TRACK 7 TRACK 6 TRACK 9 TRACK 1 TRACK 10
2-Music2 7-Music7 4-Music4 1-Music1 3-Music3 6-Music6 11-Music11 15-Music15
1-Music1.mp3 2-Music2.mp3 3-Music3.mp3 4-Music4.mp3 5-Music5.mp3 6-Music6.mp3 7-Music7.mp3
Add All Delete Delete All
Press and hold V to move to the next page. Press and hold v to move to the previous page. If you are in a file list on the MP3/WMA menu and want to return to the Folder list, use the v/V to highlight and press ENTER.
Press PLAY ( N ) or ENTER to start.
Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the Program list have played once.
To resume normal 8 grammed playback,playbacka from pro-the select track on List then press ENTER.
To repeat all tracks on the program list, press REPEAT a second time.
Check the following guide for the possible cause of a problem before contacting service. Symptom No power. The power is on, but the DVD+VCR does not work. No picture. Cause The power cord is disconnected. No disc is inserted. No tape is inserted. The TV is not set to receive DVD+VCR signal output. TV/VCR mode for DVD+VCR is set to TV. Correction Plug the power cord into the wall outlet securely. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) Select the appropriate video input mode on the TV so the picture from the DVD+VCR appears on the TV screen. Press the TV/VCR button on the remote control repeatedly to choose VCR mode. TV indicator disappears in the display window. Connect the video cable securely. Turn on the TV. Select the correct input mode of the audio receiver so you can listen to the sound from the DVD+VCR. Connect the audio cable securely. Turn on the equipment connected with the audio cable. Set the Digital Audio Output to the correct position, then turn on the DVD+VCR again by pressing POWER. Clean the disc. Clean video heads. Use TRK(+/-) for manual tracking adjustment while tape is playing. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) Insert a playable disc. (Check the disc type, color system, and Regional code.) Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide. Clean the disc. Cancel the Rating function or change the rating level. Point the remote control at the remote sensor of the DVD+VCR. Operate the remote control within 23 ft (7 m). Remove the obstacle. Replace the batteries with new ones. When using a VCR, first press the VCR button. When using a DVD, first press the DVD button.
indicator appears after DVD+VCR is turned off. Stereo Audio Record and/or Playback is not present.
DVD+VCR is in Timer Recording mode.
TV is not Stereo-compatible. Broadcast program is not in stereo format. DVD+VCR A/V Out jacks are not connected to TV A/V In jacks. DVD+VCR Audio/Video Out is not selected for viewing at the TV. DVD+VCR BROADCAST TYPE mode is set to SAP or MONO. The "PROGRESSIVE SCAN MODE" message remains onscreen. DVD+VCR was turned off while setting the Progressive scan mode.
Moisture Condensation Moisture condensation can occur: When the DVD+VCR is moved from a cold place to a warm place. Under extremely humid conditions. In locations where moisture condensation may occur: Keep the DVD+VCR plugged into an AC power outlet with POWER On. This will help prevent condensation. When condensation has occurred, wait a few hours for the DVD+VCR to dry before using it.
Troubleshooting (Continued) Video Head Cleaning
Video head clogging
The video heads are the means by which the unit reads the picture from the tape during playback. In the unlikely event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be determined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely snowy). If this is the case, use a high quality head cleaning system or have them cleaned professionally.
Video head cleaning
Video head cleaning is needed when the playback picture becomes unclear. This signifies that the heads are getting dirty and can occur when playing poor quality or damaged tapes. If the heads require cleaning, use an equivalent high quality chemical non-abrasive (wet) head cleaning tape or have them cleaned professionally. If playing a head cleaning tape in the unit once does not improve the picture, play it several times before requesting service.
DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE TOP COVER. Video heads may eventually wear out and should be replaced when they fail to produce clear pictures. To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
Language Code List
Enter the appropriate code number for the initial settings Disc Audio, Disc Subtitle and/or Disc Menu (See page 18).
Language Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faeroese Code 7079 Language Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Quechua Code 8185 Language Singhalese Slovak Slovenian Somali Spanish Sudanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapk Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 9085
LAC-M1500 XM-ZR704 EWT800 IC-V8000 SA-AK640 DVP-NS999ES PSS-595 3507722 Yamaha M916 Esi-32 HQ6990 16 ZOB892X 370 BW 2550LN 0 3 32PW8505-12 XH G1S PD-J900M Siemens SK65 MS 3200 ATS-606A ZX-10R Indicator KV-29CL10E EX-Z75 SDM-X52 Draft LH-W360SE DST Kt-6 HTS3011 12 AVR-4806CI Jamlab VDR-D150EP R2 0 TLA105 Rambla 250I KX-TCD715 HK6850 Ferrari-2003 RZ-15LA31 01WFD Max Hpdi HX2490 DX9400F Spectra AF Scotsman DC33 LN40R71B CI-5100 Freezer 1840 KDC-5024V CS-RE12HKE Aastra 8314 MZ-42PM13 C200-1-5 4515N SPH-M900 AWT1255AA Amplifier Edition Lil Fish Accompli 008 Adapter Univers41 Control S 2004 AL1516W Optio S5Z ACD2900 Server CP-A100 VK74A 42PF9631D TCK870ES Array Classique Iriver T60 HM70-100 945GM3 YZ450F-2008 Trajet Scie DUO Review - 2003 Ua46C6900 TH-37PV70F 29FS4RK-LG SLV3220-00 KX-TG6412 D-540 52x24x52 USB GPS 128 ML-1650 EW512S Maxima-1997 Dynax 5 Zanussi W902 UM 030 Mackie 8BUS AVC-A11XV ENS-0246B PS-42C6H
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101