WORLDWIDE HEADQUARTERS GPI INTERNATIONAL LIMITED
Gold Peak Building, 8/F., 30 Kwai Wing Road, Kwai Chung, N.T., Hong Kong Tel: (852) Fax: (852) E-mail address: gpii@goldpeak.com Website: http://www.gpbatteries.com
Battery Handling and Precautions
Safety Dont Dismantle Do not disassemble or modify the battery pack. The battery pack is equipped with built-in safety/protection features Should these features be disabled, the battery pack can leak, emitting corrosive liquid, or it would overheat, burst or ignite. Do not connect the positive (+) and negative (-) terminals with a metal object such as wire. Do not transport or store the battery pack together with metal objects such as necklaces, hair pins, etc. Otherwise, short-circuiting will occur, overcurrent will flow, causing the battery pack to leak electrolyte, overheat, emit smoke, burst and/or ignite, or the metal objects such as wire, necklaces or hair pin can generate heat. Do not discard the battery pack into fire or heat it. Otherwise, its insulation can melt down. Its gas release vent or safety features will be damaged and/or its electrolyte can ignite, possibly leading to acid leakage, overheating, smoke emission, bursting and/or ignition on it. Do not immerse the battery pack in water or seawater, and do not allow it to get wet. Otherwise, the protective features in it can be damaged. It can be charged with extremely high current and voltage, abnormal chemical reactions may occur in it, possibly leading to acid leakage, overheating, smoke emission, bursting and/or ignition. Do not pierce the battery pack with a nail or other sharp objects, strike it with a hammer, or step on it. Otherwise, the battery pack will become damaged and deformed, internal shortcircuiting can occur, possibly leading to acid leakage, overheating, smoke emission, bursting and/or ignition. Do not strike or throw the battery pack. Otherwise, the protective feature in it may become damaged, it can be charged with extremely high current and voltage, abnormal chemicalreactions can occur in it, possibly leading to acid leakage, overheating, smoke emission, bursting and/or ignition. Do not solder directly onto batteries. Always solder onto solder tag for connection. Otherwise, heat can melt down itinsulation, damage its gas release vent or safety features possibly leading to acid leakage, overheating, smoke emission, bursting and/or ignition on it.

Dont Short Circuit

Dont Put Into Fire

Dont Put Into Water

Dont Pierce

Dont Strike Or Throw

Distributed by:

Date: Dim.:

26.01.x 118mm(H) Blister card 450g

GPPA8RBL-A 02/10

Dont Direct Soldering
All rights reserved. No parts of this catalogue written or pictorial may be reproduced without the permission of GPI International Ltd.
Lithium Ion Rechargeable Batteries cat.

Color: 4C Request By:

Keness

Done by: Vendor:

Morris

Super production

Approved by:
Lithium Ion Rechargeable Batteries
Increased demand for portable electronic appliances has expanded the spectrum of battery applications to a wider extent. The new advanced appliances are looking for batteries with longer running-hours, lighter weight and higher energy density. Among all the existing rechargeable battery systems, Lithium Ion technology is, and will continue to be the most logical power force for the portable age. GP Batteries, one of the worlds top-ten battery manufacturers, offers a wide range of ultra-high performance cylindrical and prismatic Li-ion batteries to meet market needs. GP Batteries owes its success to 40 years of battery making experience, continuous efforts in R&D, cutting edge technology and advanced equipment. Today, GP Batteries has its manufacturing, marketing and distribution operations in 15 countries serving both retail and OEM markets. Take full advantage of GPs advanced technology and quality Li-ion batteries for better performance, and for more opportunities.
Applications & Recommended Models

Cell Model Bluetooth Headset Digital Pen Portable Speaker LED Lighting Payment Terminal HDDV Communication Devices Remote Controll Wireless Mouse & Keyboard
GP603450L114R GP623048L104 GP103450L180R(P) GP103450L180R(X) GP103450L180R(C) GP0836L17 GP1029L20 GP1229L30 GP1865T220

Major Features

High Energy Density Advanced technology provides ultra-high capacity performance for GP Li-ion batteries. Variety of Sizes and Capacities Our expanding list of models encompasses a wide range of battery sizes and capacities, making it convenient in various applications. Wide Operating Temperature Range GP Li-ion batteries can be charged over a temperature range of 0C to 45C, and discharged between -20C to 60C. Designed for Safe Operation All batteries are equipped with multiple safety features, including safe shut-down separator and safety vent. High-Output and High-Load Characteristics Capable of continuously discharge at 2C rate. Effective for large power consumption applications, such as Notebook, PC etc. Stable Operating Voltage Relatively gentle decreases in discharge voltage enhances the operating stability of the applications. Good Charge Retention Charged GP Li-ion batteries can be stored for long period with high residual capacity, because of low self-discharge rate. No Memory Effect The discharge performance is not affected even when the batteries are subjected repeatedly to shallow discharge cycles. There is thus no need to pre-discharge the batteries before charging. Long Cycle Life GP Li-ion batteries offers stable capacity and performance for hundreds of cycles, thus providing a great value over its life time. ISO Accreditation GPs manufacturing plants are accredited with QS9000, ISO 14001 and OHSAS 18001 certificates, International quality standards in terms of design, manufacturing and environmental management are guaranteed.

Cell Construction

Cylindrical
Combination tear-away-tab and vent device Top (+ve) Vent hole PTC switch Tab (+ve)

Prismatic

Gasket Negative terminal Safety vent line Insulator
Tab (+ve) Positive electrode

Positive eletrode

Tab (-ve)
Separator Negative electrode Separator Aluminum case

Negative electrode

Can (-ve)

Bi-metal

Positive terminal

Cylindrical Models

Specications
Cell Cell Model Voltage (V) Capacity (mAh) Min Typ Dimension (mm)# Diameter Height Weight (g) Max.Continuous Discharge Current (mAh)
Performance Characteristics
Superior High Temperature Storage Performance
Reversible Capacity (% of Initial)
GP0820L07* GP0836L17* GP1015L08* GP1022L15* GP1029L20* GP1229L30* GP1443L68* GP1850L140* GP1865T220*
3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.6
8.2 8.2 10.2 10.2 10.2 11.5 14.2 18.5 18.5
19.5 35.5 14.8 21.6 28.5 28.2 43.0 50.0 65.5
4.0 4.8 3.1 4.2 6.0 8.5 16.0 31.0 44.0
Fully charged cell stored at 60C for 1 week.
Typical Ambient Temperature : Charge : 0C to 45C / Discharge : -20C to 60C / Storage : -20C to 45C * UL recognized model # Dimension of bare cell before cycling.

Typical

Pack Mechanical Drawing

Voltage (V)

Discharge at Different Temperatures
4.4 4.4 4.0 3.6 3.2 2.8 2.4 0
-20C Charge: 0.5C to 4.2 V for 180 min at 23C Discharge: 0.2C to 2.8 V at various temperatures 0C 60C 40C 23C
Discharge at Different C-rate

4.0 3.6 3.2 2.8 2.4 0

Charge: 0.5C to 4.2 V for 180 min at 23 C Discharge: to 2.8 V at 23 C at various C-rate 2.0C 1.0C 0.5C 0.2C

% of Typical Capacity

GP1029L20 GP1229L30
Cycle Life At Room Temperature
Test Regime : 1C and 0.2C Rate

Charging Characteristics

4.4 4.0
Voltage % of Nominal Capacity

% of Initial Capacity

1C 80% of initial capacity

3.6 3.2 2.8 2.4

0.8 0.6

C-rate

0.4 0.180

450 500

Number of Cycles

GP0836L17 GP1865T220

Time (min)

Current (0.5C) & Capacity (100%)

Prismatic Models

Cell Cell Model Voltage (V) Capacity(mAh) Min Typ Dimension (mm)# Thickness Width Height Weight (g) Max. Continuous Discharge Current (mAh)

40C 0C -20C 60C 23C

Charge Charge Voltage Charge to 4.20 +0/-0.05V per cell, each being supervised. Charge Current Charge Temperature Do not exceed 1C charging rate. Charge in the range of 0 to 45C.
GP503436L60R* GP503449L98R* GP603450L114R* GP623048L104* GP103450L180R (P)* GP103450L180R (X)*+ GP103450L180R (C)*
3.7 3.7 3.7 3.7 3.7 3.7 3.7
5.3 5.4 6.4 6.6 10.6 10.6 10.5
34.0 34.0 34.1 30.0 34.0 34.0 34.0
36.1 49.4 50.0 48.0 50.0 50.0 50.0
Charge: 0.8C to 4.2 V for 150 min at 23C Discharge: 0.2C to 2.8 V at various temperatures
Discharge Discharge Current Size the discharge over-current protection elements to be able to take the maximum current. Discharge Temperature Overdischarge Discharge in the range of -20 to 60C. Do not discharge below 2.8V/cell under signicant loads. Small leakage current may discharge the cell further in some devices even after shut down.
Typical Ambient Temperature : Charge : 0C to 45C / Discharge : -20C to 60C / Storage : -20C to 45C * UL recognized model # Dimension of bare cell before cycling. Designed for very low temperature application.

2.0C 1.0C 0.5C 0.2C

Charge: 0.8C to 4.2 V for 150 min at 23C Discharge: to 2.8 V at 23C at various C -rate
Storage Storage Temperature Store at -20 to 45C. Signicant permanent loss can occur when storing at 60C for prolonged period. Keep the battery away from re. Long Term Storage Deterioration of cell capacity is slower at lower state of charge. Store at below 50% state of charge or about 3.7V. For extended storage period over one year, recharge the battery to 3.7V to prevent overdischarge of the battery.

400 500

Charge : 0.8C to 4.2V for 150mins Discharge : 0.2C to 2.8V at 20C

GP103450L180R ( C )

GP623048L104
Equipment Design Reverse Polarity Provide mechanical stop so that the battery pack cannot be inserted in a reverse manner. The electrical contacts should be designed so that they
Current (C) & Capacity (100%)

Prevention

1.0.8 0.6
are difcult to short. Battery Location Elements like solid state safety circuit should be mounted so that they are not subjected to high temperature or electromagnetic eld emanating from the device it is powering or being charged by. Damage Prevention Due to Drop The wiring and cells should be protected inside the battery pack by designing so that they are difcult to short.

: Rechargeable Lithium Ion Cylindrical Cell : = 8.2 mm * H = 35.5 mm : Recommended discharge current 34 to 340 mA : 3.7V : Typical: 170 mAh Minimum: 155 mAh When discharged at 34 mA to 2.8 V at 23 oC : 85 mA to 4.2V for 3.0 hrs at 23 oC

Model No.:

GP0836L17
Nominal Dimension (with Sleeve) Applications Nominal Voltage Capacity

Charge Condition

Recommended : 34 mA to 136 mA (0.2 to 0.8C) Charging Condition in Charge termination control Applications recommend control parameters: Taper current 0.05C at 4.2 V
Discharge at Different C-rate

2.0C 1.0C 0.5C 0.2C

Clamped Charging Voltage Service Life

: 4.2 V +/- 0.05 V

: >500 cycles (70% of typical capacity) : Approx. 4.8 g : 210 m max. at 1000Hz

Voltage (V)

3.6 3.2 2.8 2.4 0% 20% 40% 60% 80% % of Typical Capacity 100% 120%
Charge: 0.5C to 4.2 V for 180 min at 23 C Discharge: to 2.8 V at 23 C at various C-rate
Weight Internal Resistance
Ambient Temperature : Charging : 0 to 45 oC Range Discharging : -20 to 60 oC ** Storage (1 month) : -20 to 45 oC Storage (6 months) : -20 to 40 oC Storage (1 year) : -20 to 35 oC Note Precaution : * with plastic sleeve : ** 60 oC is only applied during 1C or lower discharging current
Charging Characteristics 4.4 4.0 Voltage (V) 3.6 3.2 2.8 2.Time (min) 0
Discharge at Different Temperatures 4.4 4.0 Voltage (V) 3.6

0oC 40oC 23oC

Current (mA) & Capacity (mAh)

2.8 2.4

Charge: 0.5C to 4.2 V for 180 min at 23 C Discharge: 0.2C to 2.8 V at various temperatures
40% 60% 80% % of Typical Capacity

100% 120%

The information (subject to change without prior notice) contained in this document is for reference only and should not be used as a basis for product guarantee or warranty. For applications other than those described here, please consult your nearest GP Sales and Marketing Office or Distributors. YRS2130 Rev.00

www.gpbatteries.com

Manufacturer reserves the right to alter or amend the design, model and specification without prior notice. Copyright@GPI International Ltd. All rights reserved