Fastening of the mounting bracket: sandwich special washers 8,4 as a spacer and fix the bracket with filister head screws M 8 x 20 and washers 8,4 in the free threaded holes. The round steel of the bracket is forward-turned.

each 2x

Fastening of the side carrier front bottom left: at the rear exhaust suspension with allen screw M 8 x 55 and washer 8,4 and self-lock nut M 8. Sandwich body washer 25 x 8,5 x 1 between carrier and rubber bushing.

each 1x

Fastening of the side carrier front bottom right: at the inner side of the footrest bracket with hexagon bolt M 8 x 20 and washer 8,4.
Fastening of the side carrier front top left+right: instead of the special alu part (look at pic.1) with filister head screws M8 x 40 and washers 8,4. Sandwich special washers 8,4 as a spacer.
Fastening of the side carrier middle left+right: at the mounting bracket (pic.2) with filister head screws M8 x 50, washers 8,4 and self-lock nuts M8. Sandwich washers 8,4 x 3mm between carrier and bracket as a spacer. In case of mounting a rear rack, too, this spacer is obsolete.
Fastening of the bracing bow with blinker adapter: with filister head screws M 6 x 20, washers 6,4 and self-lock nuts M 6. Fastening of the blinkers: to the bracing bow/blinker adapter with original screws. If you have already bought the cases, look at step eight. In this case, mount the adapters together with the bracing bow.
8 Hint: assembling side cases
Fastening of adapter to hook in the fixing lock Hint : The adapters are enclosed with the side cases. They are not included in the side carrier set.

each 4x

Control all screw connections after the assembly for tightness! Please notice our enclosed service information. Also available: Rear rack Engine guard
650.01 black 501.01 black
Hepco & Becker GmbH An der Steinmauer 6 D-66955 Pirmasens Germany
Tel.: +- 1453 - 100 Fax: +- 1453 - 120 eMail: vertrieb@hepco-becker.de www.hepco-becker.de Luggage ideas.