21T3A-T

COLOUR TELEVISION

Service Manual

MODEL : 21T3A-T (Latvia)

Features

54cm square flat picture tube Auto search 218 program presetting and memory Child lock & on screen help function

Haier Group

NO:M-PG-LE-21T3A-T-8821

Edition:2004/12/10

CONTENTS
16 Product Code illumination and Series Introduction --------------------2 Features --------------------------------------------------------------------------------3 Specifications-------------------------------------------------------------------------4 Safety Precautions-------------------------------------------------------------------5 Warning and Cautions--------------------------------------------------------------6 Net dimension------------------------------------------------------------------------12 Parts and Functions----------------------------------------------------------------13 Remote Controller Functions----------------------------------------------------14 Program Diagram--------------------------------------------------------------------15 Maintenance Service and Trouble shooting--------------------------------16 Circuit Diagram-----------------------------------------------------------------------22 Circuit Explanation------------------------------------------------------------------23 Adjustment-----------------------------------------------------------------------------28 Exploded View-------------------------------------------------------------------------34 List of Parts-----------------------------------------------------------------------------35 Damageable Parts List--------------------------------------------------------------45 Information of Resistors and Capacitors-------------------------------------46
Product Code illumination and Series Introduction
1. Product Code illumination and Series Introduction

21 T 3A T

Compony of Signal processor IC T:Toshiba
Model series of cabinet mumber Type of CRT T:super flat CRT size(unit:inch)

2. Features

FUNCTION
MODEL 21T3A-T Latvia 8821 super flat B/G D/K 218 ENGLISH/arabic 5

MODEL 21T3A-T Latvia

1 PICTURE Main IC 2 CRT 23 Color system Audio system NO.of channels OSD language AUDIO AV stereo Multi-picture modes Super woofer Surrounding sound Treble/bass boost Left/right balancer NICAM Multi-audio modes Tone adjuster MTS/SAP JACK AV input Auto-volume leveling
24 SOFTWARE Digital curtain 25 Slow fading on & off Semitransparent menu Non-flshing channel changing ZOOM 16:9 mode Games Calendar Child-lock Multi-functional lock No-picture listening Background light Auto-timer on CCD 37 38

PAL SECAM NTSC 26

marine game
V-CHIP 39 PARAMETER NO. of built-in speakers 40 Audio output power(W) back 1,side1 back 1 back 1 back 1 side Total power input Voltage range V W

65056552 5

AV output DVD terminal S-video jack Headphone socket SCART socket
Power frequency Hz Time of sleep timer(MINS) Net weight(KG) Gross weight(KG) Net dimension(MM) Packaged dimension(MM) Quantity for 20' container Quantity for 40' container Quantiry for 40' high container
FUNCTIONS : 1.ALL-BAND CATV (470MHz) 3.Auto and manual tuning 5.Multiple picture modes selection 7.Sliding color bar 9.volume setting stored 11.Child hold 2.I2C bus control 4.Audio/video input/output interfaces 6.Screen saver when no signal 8.218 programs Preset 10.Program scan 12.Slide curtain power on/off display improved eye protection

Specifications

3. Specifications
POWER SUPPLY: AC 220V, 50 Hz

Tuning system: voltage synthesized type auto-search fine tuning system IF: 38.9MHz Power consumption: 70W Antenna input impedance: 75 Receiving system: a) Color system: PAL/SECAM/NTSC3.58MHz/4.43MHz b) Broadcast TV system: B/G D/K Language displayed: ENGLISH Video input: 1.0VP-P (75) Audio input: 436m Vrms (40K)

Safety Precautions

4.Safety Precautions
IMPORTANT SAFETY NOTICE Many electrical identify these parts and mechanical parts in this chassis have special safety-related characteristics! In the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of the manufacturer. General Guidance An Isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents that might result in personal injury caused by electrical shocks. It will also protect the receiver and its components from being damaged by accidental shorts of the circuitry that might be inadvertently introduced during the service operation. If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it with a specified one. When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1W), keep the resistor 10mm away from PCB. Keep wires away from high voltage or high temperature parts. Due to the high vacuum and large surface area of the picture tube, extreme care should be taken in handling the Picture Tube. Do not lift the Picture Tube by its Neck. X-RAY Radiation Warning: The source of X-RAY RADIATION in this TV receiver is the High Voltage Section and the Picture Tube. For continued X-RAY RADIATION protection, the replacement tube must be of the same type as specified in the Replacement Parts List. Before returning the receiver to the customer, Always perform an AC leakage current check on the exposed metallic parts of the cabinet, such as antennas, terminals, etc., to make sure that the set is safe to operate without any danger of electrical shock.

Warning and Cautions

5. Warning and Cautions
1. When you clean the TV set, please pull out the power plug from AC outlet. Don' t clean the cabinet and the screen with benzene, petrol and other chemicals. 4. To prevent the TV set from firing and electric shock, don' t make the TV set rain or moisture.

components are usually called Electrostatic ally Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field effect transistors and semiconductor chip components. The following techniques should be used to help reduce the incidence of component damage caused by static electricity. 1. Immediately before handling any semiconductor component or semiconductor- equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device, which should be removed to prevent potential shock prior to applying power to the unit under test. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly. Use only a grounded-tip soldering iron to solder or unsolder ES devices. Use only an anti-static type folder removal device. Some solder removal devices not classified as anti-static can generate electrical charges sufficient to damage ES devices. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material). Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. CAUTION: Be sure no power is applied to the chassis or circuit, and observe all other safety precautions. 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise even some normally harmless motions such as mutual brushing of your clothes fabric or lifting of your foot from a carpeted floor might generate static electricity sufficient to damage an ES device.)

3. 4. 5. 6.

Net dimension

6. Net dimension

Parts and Functions

7. Parts and Functions
1.Front panel of the TV set
Menu TV/AV Volume switch up/ down Channel position up/down
Signal receiver Power indicator
2.Rear panel of the TV set
Video output terminal Video Y input terminal Video Cb input terminal S-VIDEO input terminal Video input terminal
Audio left channel output terminal Audio right channel output terminal Antenna input socket Video Cr input terminal Audio right channel input terminal Audio left channel input terminal
Remote Controller Functions
8. Remote Controller Functions

Buttons and Descriptions

TV and AV Exchange Button
To exchanger between TV and other available video inputs

Mute Button

Screen Display Button System Adjust Button
Press to conceal the sound of programs.
Direct-digit Choosing Button Lock Setting button
Directly select channel numbers
Used for setting lock for channelsearching, channel,AV and clock,etc. There are DYNAMIC, STANDARD, MILD,MEMORY, PICTURE MUTEand COLOR MUTE six modes of picture. Use this button to adjust the menu, the volume and the channels, as well as to control the game.
Picture Mode Select Button
Menu Select/ Adjust Button

" "

Chromaic Belt Length Adjust Button Program Play-forward Button Calendar Game Background Select Button BAR Button (this machine has not this Fire Button (can call the calendar) Background Lamp Control Button Restart Game Button
function) (this machine has not this function)
The stopwatch can work 1 hour without interruption and when you use this function,do not operate other function button as well.
DC Standby Button Sleep Timer Button

Program Diagram

9.Program Diagram
Insert the power plug into the power line socket and insert the antenna plug into the antenna socket on the rear panel. Press down the power switch of the TV set. The red indicator light goes on. If no picture appears, press the button on the remote controller. Follow the steps below. A Program preset 1. Auto searching and storing program Press MENU button on the remote controller then use the key to call up the tune program menu on the screen. Then Press the menu item to select it.Use the key to select the bar auto search program then press the to make sure. If you want to stop ,press the key . 2. Manual search and fine tune Press MENU button then use the key to call up the tune program menu on the screen. Then Press the menu item to select it.Use the key to select the bar Manual search program then press the to make sure. 3.Deleting channel number Press Program up/down buttons to select a channel to skip. Press MENU to call Menu. then use the key to call up the TUNING menu on the screen. Then Press the menu item to select it.Then select SKIP and select SKIP to ON. Now the program number is deleted. Repeat the above steps and select SKIP to OFF, the deleted program number can be resumed. B C Volume tuning - to increase and + to decrease the volume. Personal preference settings Press VOLUME buttons Picture modes Press SELC PICTURE repeatedly to change the Picture Mode.

Check the voltage of V411 collector is normal Higher Lower

InspectT401 R437 etc.

T402,VD415 or C415,C416 are broken
V411 is not well welded or open

Normal

Check to see if +9V voltage is normal at PIN 17 of N204
Change wrong component or check Normal Abnormal
Check Z901 N204 and peripheral circuit of N204

Check +9V power supply

Maintenance Service and Trouble shooting 3 Horizontal bright line
Make R328 open. Multimeter is at range R 1K. Red probe connects to ground. Touch No.5 of N402 with black probe. Bright line flashes for a moment Yes Check to see if the voltage of pin 15 and pin16 of N204 is normal No Inspect N204 and peripheral components of N204 Yes Check to see if the deflection yorks are connected, C433 is open or weldless. Inspect peripheral component of N402 and N402 itself No Check to see if voltage of pin6 at N402 is normal
Yes Change N204 and repair circuit
No Inspect +27V power supply

4. No sound and picture

Snowy noise exist Not exist Check to see if RAGC is at 00 mode Exist Check to see if voltage output available at tuner
Yes Enter D-MODE or enter S-MODE with customer remote controller. Make RAGC tuned to 25 or so. Noise on picture just disappears.
No Inspect V101 Z101 N204and PIF part
Antenna or tuner is abnormal
No Inspect the circuit from CPU to tuner
Maintenance Service and Trouble shooting 5 Picture exists but no sound
Make C703 open. Multimeter is at band R 1K. Red probe connect to ground. Touch No.7 of N701 with black probe No noise Power amplifier is abnormal. Inspect N701 and peripheral components of N701 Yes Inspect V701 V103 Have noise Make V701 collector open. Touch No.7of V701 with black probe to see if noise exists No Check to see if +20V exists
Yes Inspect N204 and peripheral component of N204
No Inspect +20V power supply
Lack of red Check to see if V611 is open or not well welded Yes Change V611 or weld V611 again No
Inspect R616,R617,R236 Inspect
No Check to see if voltages of XZ601 are normal Yes Inspect the circuit from No.50of N204 to No.3 of XZ603
Before calling service personnel, please check the following chart for a
possible cause to the trouble you are experiencing.
TV is not turned on Good picture , no sound Poor color / tint, good sound Spots appear on the screen Lines appear on the screen Double images or ghosts Snowy picture or black screen

Be sure the power cord is plugged in. The MUTE function may be used. Adjust the volume of the TV set. The contrast, color and tint may be incorrectly adjusted. If you change the direction of the TV while the TV is on, the picture may suffer from color shading. If so, turn off the TV and allow about 30 minutes to cool, then turn on the TV again. The broadcast signal may be jammed by other electrical sources such as cars, motorcycles, electric trains, high tension lines, neon signs, hair dryers. The broadcast signal may be jammed by other TV receivers, personal computers, and TV games, as well as interference from radio stations. Interference may be due to broadcast waves reflected from mountains or buildings. Check if the direction of the antenna is changed. The antenna may be disconnected or falling out. Check if the direction of the antenna is changed. The batteries in the remote control may be exhausted. The batteries may be improperly installed. Check if there are obstacles between the remote control and the remote (infrared ray) receiver. Check if there is strong light interference around the remote (infrared) receiver. Check if the main power is ON.
Clacking noise inside the receiver Uneven colour in a certain portion of the screen
It may result from the expansion of the shell caused by a temperature change. This will not affect the picture and sound quality. If the picture is too bright, this may occur according to the nature of the pictures. Reduce the contrast, it may resume to normal.

CAUTION

In case of problems, have your TV serviced by qualified personnel.Never attempt to service the set yourself since opening the cabinet may expose you to dangerous voltage or other hazards.

Circuit Diagram

11. Circuit Diagram

Circuit Explanation

12. Circuit Explanation
1 Microprocessor and Small signal processing: super monolithic integrated circuits V HAIER8821 is super large integrated circuit decoder, containing intermediate image amplifying, intermediate sound amplifying, horizontal and vertical scan, small signal processing, color decoding, hi-pressure tracing and over-load protection, I2C bus control. Information introducing functions and testing data for maintenance is listed in Table 1. Table 1 Step 15 16

Function

BAND1 BAND2 KEY INPUT DIGITAL GND CPU RESET CPU CLOCK CPU ClOCK TEST +5 VCC GND SIGNAL GND HORIZONTAL SYNC SIGNAL INPUT HORIZONTAL RETURN PULSE SIGNAL INPUT CHARACTER HORIZONTAL LOCATION HORIZONTAL AGC VERTICAL SIGNAL PRODUCE LOCATION VERTICAL RETURN PULSE SIGNAL INPUT CHARACTER VERTICAL LOCATION HORIZONTAL VCC NC Cb SIGNAL INPUT Y SIGNAL INPUT Cr SIGNAL INPUT TV GND COLOR SIGNAL INPUT EXTERIOR VEDIO SIGNAL INPUT2

Working Voltage (V) 0 1.2.3 2.1.7 6.3 4.3 5.3 8.2.4 2.4 2.0 2.4 3.4 2.6 4.5 3.5 8.8 3.6 1.8 4.3
Ground Resistance (R) Positive Negative ( ) ( ) 2100 1400
VEDIO SIGNAL INPUT AUTOMATIC BRIGHT CONTROL AUDIO OUTPUT +9 VCC IF SIGNAL OUTPUT SIF SIGNAL OUTPUT EXTERIOR SIGNAL INPUT
SIF SIGNAL INPUT AND LEVEL REVIS DC FEEDBACK PIF PLL +5 VCC FLITE RIPPLE DEEMPHA IF AGC IF GND IF INPUT IF INPUT RF AGC Y/C VCC +5 MONITOR OUTPUT BLACK EXTEND COLOR DECODE PLL GND +9V VCC RED SIGNAL OUTPUT GREEN SIGNAL OUTPUT BLUE SIGNAL OUTPUT TV SIMULATE GND GND +5V VCC MUTE I2C SERIAL BUS DATA LINE 0 I2C SERIAL BUS COLOCK LINE 0 BACKGROUND LAMB CONT TUNE VOLTAGE AV CHOICE CONTROL HORIZONTAL SYNCHRONIZATION SIGNAL REMOTE CONTROL INPUT STANDBY CONTROL
2.9 2.2 2.2.1 4.4 1.3.1.9 1.8 2.8.7 2.9 2.9 3.0 5.0.1 4.4 0.2 4.3.6

12500 8000

2. Analysis of common path circuits High frequency television signals, received via an antenna (or transmitted through a cable TV system) to the input terminal of the high frequency tuner A101, are processed for tuning and high frequency amplifying and mixing, then a 38.9MHz image intermediate frequency and 34.4MHZ and intermediate frequency signal will be released at the IF terminal of Z101 to b of the transistor V101 , where signals are amplified to compensate for the insertion losses of the sound surface wave filter. Single or dual-ended input is used for the sound surface wave filters Z101 of this appliance according to system properties. Intermediate frequency signals will be transmitted to (41) and (42) of N204(Haier8821). The mixed signals of picture video signals and secondary sound intermediate frequency signals output from (31) of N204, After sound carrier frequency is trapped by the trap filter, intermediate frequency signals are amplified and PLL image decoded, The AGC time constant is dependent on C205 (1u) connected to (39) of N204 (HAIER8821),.
3.Analysis of sound power amplifying circuits Sound power amplifying circuits are composed of integrated circuitsTDA2611 and peripheral components. TDA2611 is an integrated electrical circuit. Information introducing functions and testing data for TDA2611 maintenance is listed in Table 4. T if a cylindrical color card is installed then a fluke III digital multimeter is used. Table 4 No. 7 Function
+20V POWER SUPPLY AMPLIFIED AUDIO SIGNAL OUTPUT GROUND RIPPLE FILTER GROUND AUDIO SIGNAL INPUT NEGATIVE FEEDBACK
Working Voltage (V) 20 7.5.1.7 2.05
Grounding Resistance (R) Positive Negative ( ) ( ) 0.43 1.8 0.0.0.76 0.78 1.1.9 0
3. Analysis of vertical sync and vertical scan output circuits The field sync signals segregated from compound sync signals are used to activate the vertical frequency segregation system which commences when a set amount of vertical sync pulse signals are tested. Of the sync pulse frequencies obtained from segregation, some are transmitted to the vertical tooth wave generator. The vertical frequency tooth wave, after geometric processing, is transmitted from (16) of N204 (HAIER8821) to (5) of vertical scan output IC N402 (LA7840). The external resistor R443 (5.6K) of N204 (16) provides a reference current to the vertical tooth wave generator. The external capacitor C244 (0.1uF) of pin (2) forms the vertical ramp wave. The vertical ramp wave is sending the pin (4) of the vertical scan output integrated circuit N402 that is a complete bridge current drive output circuit. After shaped and amplified the vertical ramp wave is output from pin (2) of N402. Information introducing functions and testing data for LA7840 maintenance is listed in Table 4. if a cylindrical color card is installed then a fluke III digital multimeter is used. Table 5 Grounding Resistance (R) Working Positive Negative No. Function Voltage (V) ( ) ( ) GROUND 13 0.45 1.VERTICAL SCAN WAVE OUTPUT 3 PUMP UP OUT 27 0.5 0.95 0.9 1.VERTICAL RAMP WAVE INPUT 0.75 0.68 1.WAVE CORRECTION +26V POWER SUPPLY 27 0.5 2.Circuit Explanation 0.83 0.65 1.VERTICAL SYNC DETECT

Adjustment

13. Adjustment
A.Factory adjustment information Operation method: after the appliance is switched on, make the volume value to zero. Then press key on the TV set and press the DISP button on remote controller at the same time to enter the S state. Press DISP button one times and S will disappear, Repeat the first step, you will enter the D mode. Now one D is displayed on the TV screen. Press PRO- and PRO+ buttons to select items for adjustment. Press VOL- and VOL+ buttons to adjust selected items. Press the POWER button to switch off the appliance and go back to the normal state. B.Maintenance menu (Table 8) Item
OSD H-pos OPT RCUT GCUT BCUT GDRV BDRV CNTX BRTC COLC TNTC COLP COLS SCOL SCNT CNTC CNTN BRTX BRTN COLX COLN TNTX TNTN ST3 SV3 ST4 SV4 SVD ASSH SHPX
OSD Horizontal position Multiple setting R CUT OFF G CUT OFF B CUT OFF G DRIVE B DRIVE SUB CONTRAST MAX SUB BRIGHT CENTER SUB COLOR CENTER FOR NTSC NTSC SUB TINT CENTER SUB COLOR CENTER FOR PAL PAL SUB COLOR CENTER FOR SECAM SECAM Cr input(#21) gain up,000~111:0dB;1.1dB;1.9dB;2.5dB;3.0dB;3.3dB;3.6dB;3.9dB Y-SUB CONTRAST SUB CONTRASRT CENTER SUB CONTRASRT MINIMUM SUB BRIGHT MAX SUB BRIGHT MINIMUM SUB COLOR MAX SUB COLOR MINIMUM SUB TINT MAX SUB TINT MINIMUM SUB SHARP CENTER NTSC3.58 IN TV NTSC3.58 IN TV SUB SHARP CENTER NTSC3.58 IN VIDEO NTSC3.58 IN VIDEO SUB SHARP CENTER OTHER COLOR SYSTEM IN TV OTHER COLOR SYSTEM IN TV SUB SHARP CENTER OTHER COLOR SYSTEM IN VIDEO OTHER COLOR SYSTEM IN VIDEO SUB SHARP CENTER IN DVD ASYMMETRY SHARPNESS SUB SHARPNESS MAX POINTS FROM CENTER VALUE

Default Value

0A 3D 55 3D 2B 7F 0E 38

Variable Mark

SHPN TXCX RGCN ABL DCBS CLTO CLTM CLVO CLVD DEF AKB SECD HPOS VP50 HIT HPS VP60 HITS VLIN VSC VLIS VSS SBY SRY BRTS AGC HAFC V25 V50 V100 MUTT STAT FLG0 FLG1 REFP RSNS GSNS BSNS MOD STBY SVM VBLK VCEN HSIZ PRBR TRUM ECCT ECCB
SUB SHARPNESS MIN POINTS FROM CENTER VALUE RGB CONTRAST DATA AT MAX DATA OF USER CONTRAST OSD RGB CONTRAST DATA AT MIN DATA OF USER CONTRAST OSD ABL DCBS The data when TV mode & SOUND SYS != M The data when TV mode & SOUND SYS = M The data when YVU mode & SOUND SYS != M The data when YVU mode & SOUND SYS = M 0:V AGC reference, deends on YC Vcc;1:Depends on integrated regulator 00:AKB off; 01:ACB ( cutoff :align to targets);10:ADB( drive: align to targets);11:AKB(cutoff0/drive:align to targets) Secam mode 50HZ HORIZONTAL PHASE 50 HZ VERTICAL PHASE 50HZ VERTICAL AMPLITUDE SHIFT DAT OF 50/60HZ HORIZONTAL PHASE 60HZ VERTICAL PHASE SHIFT DATA OF 50/60 HZ HORIZONTAL PHASE V-LINEARITY V-S CORRECTION V-LINEARITY V-S CORRECTION SECAM B-Y SECAM R-Y SUB BRIGHT RF AGC ADJUSTMENT 1/2 AFC DATA ADJUSTMENT VOLUME OUTPUT DATA AT 25% VOLUME OUTPUT DATA AT 50% VOLUME 100 Y-MUTE FOR SOFT START CONTRAST UP FOR SOFT START Flag0 Flag1 AKB Ref Pulse Position R SENS G SENS B SENS 00:akb CUTOFF SENSITIVITY,*9.75;01:*10.00;10:*10.25;11:*10.50; MOD.3:0 CUTOFF range:-0.65~+0.65;1:-0.65~+0.85 Bit0,1:IF Standby; Bit2,3: VCD Standby PIC1 SVM V BLANKING START AND STOP POINT V CENTERING PICTURE WIDTH E-W PARABOLA TRAPEZIUM EW-CORNER CORRECTION(TOP) EW-CORNER CORRECTION(BOTTOM)

TJC1-1Y/2

HXC-54F TJC3-2Y
SPEAKER CONNECTING WIRE(850mm)
KEY CONTROLE SUBASSEMBLY ROBOTICIZED INSERTING SUBASSEMBLY
PCB CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR PLUG SEAT PLUG SEAT POWER CONTROLING SUBASSEMBLY
POWERCONTROLINGADVANCE SUBASSEMBLY
RT13-1/6W-5.6K-J------T RT13-1/6W-11K-J------T RT13-1/6W-16K -J------T RT13-1/6W-30K-J------T RT13-1/6W-110K-J------T 520315-7 TJC3-2A
LED LED BRACKET PCB POWER SWITCH INFRARED REMOTE CONTROL RECEIVER CARBON FILM RESISTOR PLUG SEAT PLUG SEAT PLUG SEAT SIDE AV SUBASSEMBLY PCB PLUG SEAT PLUG SEAT PLUG SEAT OXIDE-FILM RESISTOR
BT205-L AUA7.747.0004 KDC-A10 HS0038A IMPORT RT14-1/4W-680-J------T TJC1-2A TJC1-2A TJC3-4A
TJC3-3A TJC3-2A TJC3-2A RY15-1/2W-270-J-10-D-A

Location

XZXZ0094005098 V513 V513a 0090100448

0090600097

Material coding Name AV TERMINAL EARPHONE JACK MAIN BOARD SUBASSEMBLY
MAIN BOARD ADVANCED SUBASSEMBLY
specification AV3-8.35-6AK CK3-3.5-09K

TRIODE SCREW

TRIODE IC

2SC4236----B-A

SJ2831-87 ST3X8F

IMPORT

HEAT SINK MICAEOUS CHIP

V411 N402

0094101552
AC263 2SD1879----B-A LA7840 IMPORT

IMPORT IMPORT

HEAT SINK

SCREW WIRE FRAME

IC HEAT SINK SCREW IC HEAT SINK SCREW
ROBOTICIZED INSERTING SUBASSEMBLY
TMM0A102 TDA2611 IMPORT SJ2831-87 ST3X8F LM7809CS IMPORT SJ2831-87 ST3X8F 0091800331 V4.0 1.6x3.0/mm 2.3x3.5/mm 0.58/5mm 0.58/5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm
PCB RIVET RIVET JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE
W310 C314 W101 W103 W105 W108 W201 W204 W205 W206 W208 W209 W210 W211 W230 W232 W234 W236 W295 W302 W305 W433 W434 W435 W436
W437 W439 W505 W506 W508 W601 W602 W605 W608 W609 W901 W903 W905 W915 W916 W917 R212 R222 R235 R480 R601 R604 R611 R614 R621 R624 R700 R705 R709 R901 R907 R908 R951 R952 VD502 W106 W203 W213 W430 W431 W576 W908 W910 W913 W914 W918 W919 W920 R318

JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE
specification 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/7.5mm 0.58/10mm 0.58/10mm 0.58/10mm 0.58/10mm 0.58/10mm 0.58/10mm 0.58/10mm 0.58/10mm 0.58/10mm 0.58/10mm 0.58/10mm 0.58/10mm 0.58/10mm 0.58/10mm
R472 L163 L561 L564 VD603 VD613 VD623 VD904 W308 W432 W572 W906 W907 W909 W912 W935 R209 R329 R926 R932 R934 R319 R924 R925 W207 R444 R701 R113 R215 R203 R204 R206 R207 R208 R210 R217 R218 R219 R220 R221 R231 R292 R301 R305 R323 R201 R205 R404 R106 R107 R325 R236

0094100019 0094100795

JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE JUMPER WIRE CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR

specification RT15-1/2W-4.7K-J------T RT15-1/2W-12K-J------T RT15-1/2W-220K-J------T RT15-1/2W-220K-J------T RY15X-1/2W-330-J-----T RT15X-1/2W-1K-J------T RT15X-1/2W-47K-J------T RI40-1/2W-5.6M-K-----T RI40-1/2W-5.6M-K-----T CC1-06-CH-63V-20PF-J-F05 CC1-06-CH-63V-20PF-J-F05 CC1-06-CH-63V-22pF-J-F05 CC1-06-CH-63V-33PF-J-F05 CC1-CH-63V-180pF-J-F05 CC1-06-SL-500V-10PF-J-F05 CC1-CH-63V-220pF-J-F05 CC1-CH-63V-220pF-J-F05 CC1-CH-63V-220pF-J-F05 CC1-CH-63V-330pF-J-F05 CC1-CH-63V-330pF-J-F05 CC1-CH-63V-330pF-J-F05 CT1-B-63V-1000pF-K-F05 CT1-B-63V-1000pF-K-F05 CT1-06-2B4-63V-1500PF-K-F05 CT1-06-2B4-63V-1800PF-K-F05 CT1-08-2B4-63V-2700PF-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-B-63V-0.01 F-K-F05 CT1-10A-2B4-500V-1000PF-K-F05 CT1-10A-2B4-500V-3900PF-K-F05 CT1-10A-2B4-500V-3900PF-K-F05 CD110-16V-10uF-M------F CD110-16V-10uF-M------F CD110-16V-10uF-M------F CD110-16V-10uF-M------F CD110-16V-22uF-M------F CD110-16V-22uF-M------F
C238 C240 C244 C295 C307 C632 C914 C916 C920 C230 C243 C927 C928 C209 C222 C571 C430 C449 C237 C108 C110 C204 C301 C215 C216 C217 C236 C245 C103 C300 C443 C926 C101 C206 C291 C292 C296 C705 C411 C700 C201 C205 C303 C231 C446 C515 C305 C517 C447 C104 C314 C413 C421 C444 C460 C461

0094200096 0094200096

Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR

V902 V102 V103 V201 V202 V203 V231 V320 V551 V571 V572 V630 V701 V901 V903 N904 R445 R520 R521 R525 R580 R574 R437 R553 R606 R616 R626 R565 R449 R534 R502 R558 R550 R573 R613 C210 C503 C504 C505 C506 C556 C555 C516 C416 C630 C535 C302 C102 C311 C717 C308 C703 C561 C433 C557

0094201010

TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE IC OXIDE-FILM RESISTOR CARBON FILM RESISTOR CARBON FILM RESISTOR OXIDE-FILM RESISTOR OXIDE-FILM RESISTOR OXIDE-FILM RESISTOR OXIDE-FILM RESISTOR OXIDE-FILM RESISTOR OXIDE-FILM RESISTOR OXIDE-FILM RESISTOR OXIDE-FILM RESISTOR OXIDE-FILM RESISTOR WIRE-WOUND RESISTOR WIRE-WOUND RESISTOR WIRE-WOUND RESISTOR FUSE RESISTOR FUSE RESISTOR FUSE RESISTOR FUSE RESISTOR CERAMIC CAPACITOR CERAMIC CAPACITOR CERAMIC CAPACITOR CERAMIC CAPACITOR CERAMIC CAPACITOR CERAMIC CAPACITOR CERAMIC CAPACITOR CERAMIC CAPACITOR CERAMIC CAPACITOR CERAMIC CAPACITOR CERAMIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR
specification 2SA1015(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT 2SC1815(Y)------F IMPORT uPC574----F IMPORT RY16-1W-1-J-15-C-A RY16-1W-120K-J-C-A RY16-1W-120K-J-C-A RY17-2W-68-J-20-C-A RY17-2W-68-J-20-C-A RY17-2W-150-J-20-C-A RY17-2W-270-J-20-C-A RY17-2W-12K-J-20-C-A RY17-2W-18K-J-20-C-A RY17-2W-18K-J-20-C-A RY17-2W-18K-J-20-C-A RY17-2W-22K-J-20-C-A RX27-6-5W-3.9-J-15-----A RX27-3A-6W-27-K RX27-3A-6W-1.8-J RF10-1/2W-0.47-J-15-C-A RF10-1/2W-2.2-J-15-C-A RF10-1W-1-J-15-C-A RF10-2W-3.3-J-20-C-A CT1-B-63V-0.01 F-K-F05 CT81-10B-2B4-1KV-1000PF-K-07-C-A CT81-10B-2B4-1KV-1000PF-K-07-C-A CT81-10B-2B4-1KV-1000PF-K-07-C-A CT81-10B-2B4-1KV-1000PF-K-07-C-A CT81-10B-2B4-2KV-220PF-K-07-C-A CT81-10B-2B4-2KV-470PF-K-07-C-A CT81-10B-2B4-2KV-680PF-K-07-C-A CT81-10B-2B4-2KV-680PF-K-10-C-A CT81-10B-2B4-2KV-2200PF-K-10-C-A CT7-B-400VAC-1000pF-K-10-A IMPORT CD110-16V-100uF-M------F CD110-16V-470uF-M------F CD110-16V-470uF-M------F CD110-25V-470uF-M-05-E-A CD110-50V-0.47uF-M------F CD110-50V-4.7uF-M------F CD288-250V-10uF-M-05-G-A CD288H-25V-1000uF-M-05-E-A CD288H-25V-1000uF-M-05-E-A
C564 C565 C559 C563 C562 C507 C708 C412 C415 C501 C502 V570 V511 V552 V101 V444 V601 V611 V621 V512 V905 FZ503 RP551 PS502 F501 L401 Z901 Z303 Z304 Z101 A101 L414 T401 T402 L502 L503 T501 VD515 N901 N201 N204 N209 TP603 TP605 XZ503 XZ411 XZ500

0094300063

Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR Al ELECTROLYTIC CAPACITOR POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE TRIODE voltage nimble resistance RESISITOR THERMOSENSITIVE RESISTOR FUSE MAGNETIC BEAD INDUCTANCE CRYSTAL OSCILLATOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR