Reviews & Opinions
Independent and trusted. Read before buy Haier Dishwasher DW12-CFE 2S!

Haier Dishwasher DW12-CFE 2S Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Haier Dishwasher DW12-CFE 2S, size: 1.1 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


About Haier Dishwasher DW12-CFE 2S
Here you can find all about Haier Dishwasher DW12-CFE 2S like manual and other informations. For example: review.

Haier Dishwasher DW12-CFE 2S manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Haier Dishwasher DW12-CFE 2S please write about it to help other people.
[ Report abuse or wrong photo | Share your Haier Dishwasher DW12-CFE 2S photo ]

User reviews and opinions

Comments to date: 2. Page 1 of 1. Average Rating:
crashoverron 3:31am on Wednesday, May 19th, 2010 
A rated energy Wish it had a lower water use ie 12l not 16l easy to install and seems to work well
axasistemi 12:28pm on Saturday, April 17th, 2010 
easy to use does not clean the dishes as clean as some of the dishwashers ive had several different wash cycles and delay function racks at the bottom constantly collapse. The only plates that fit in are small side plates.

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




Granada Minnesota 56039 MN Dishwasher Manuals Haier Dishwasher Manuals 2-drawer Dishwasher, Automatic Dishwasher, Built-in Dishwasher, Compact Dishwasher, Convertible Dishwasher Haier Dishwasher Manuals
Haier Domestic Dishwasher Owner Manual DW12-CFE S Haier Dishwasher Manuals
Problems with your home can happen when you least expect. The last thing a home owner may have is time, patience or savings for an unexpected, costly repair. A Central Mass Home Warranty can help cover replacement or repairs of electrical, plumbing, HVAC systems and appliances.
Dishwasher Manuals 2-drawer Dishwasher, Automatic Dishwasher, Built-in Dishwasher, Compact Dishwasher, Convertible Dishwasher Haier Domestic Dishwasher Owner Manual DW12-CFE S Haier Dishwasher Manuals


Dishwasher DW12-PFE1S Instructions for Use



Index (EN)

Safety information Installation Getting to know your dishwasher How to fill the salt How to fill rinse aid How to fill the detergent dispenser Not suitable for the dishwasher Arranging crockery, glasses, etc. in the dishwasher Programme overview Care and maintenance Washing dishes How to keep your dishwasher in shape Fault finding Important information Technical data 10
Stoviglie non idonee Caricamento delle stoviglie Tabelle dei cicli di lavaggio Manutenzione e cura Lavaggio stoviglie Suggerimenti per una lunga durata della lavastoviglie Diagnosi dei guasti Avvertenze Caratteristiche tecniche

Indice (ES)

Consejos de seguridad Instalacin Familiarizndose con el lavavajillas Rellenar la sal descalcificadora Rellenar el abrillantador Detergente Vajilla no apropiada Colocacin de la vajilla Cuadro de programas Cuidado y mantenimiento Limpieza de la vajilla Cmo cuidar el lavavajillas Pequeas averas de fcil arreglo Advertencias Caractersticas tcnicas 50

Inhaltsverzeichnis (DE)

Sicherheitshinweise Installation Geschirrspler kennen lernen Wie wird der Salzbehlter gefllt ? Wie wird der Klarspler gefllt? Reiniger Nicht geeignetes Geschirr Geschirr einordnen Programmbersicht Wartung und Pflege Geschirrsplen So halte ich das Gert in Topform Fehlersuche Hinweise Technische Daten 20

Indice (PT)

Instrues de Segurana Instalao A sua nova mquina de lavar loia Adiao de sal Adiao de adicionar abrilhantador Detergente Loia no apropriada Introduzir a loia na mquina Tabela de programas Manuteno e tratameento Lavagem da Loia Como manter a sua mquina em forma Pesquisa de Anomalias Indicaes Caractersticas tcnicas 60

Inhaltsverzeichnis (FR)

Consignes de scurit Installation Faire connaissance avec votre lave-vaisselle Comment remplir le rservoir de sel ? Comment remplir le liquide de rinage? Dtergent Vaisselle inadquate Comment remplir votre lave-vaisselle Tableau des programmes Nettoyage et entretien Laver la vaisselle Comment maintenir votre lave-vaisselle en bon tat de fonctionnement Dtection des pannes Remarques Caractristiques techniques 30

Inhoud (NL)

Veiligheidsvoorschriften Installatie Kennismaking met het afwasautomaat Zout Glansspoelmiddel Zeep Serviesgoed sorteren De serviesgoed inruimen Programma-overzicht Schoonmaken en onderhoud Afwassen De zorg voor uw vaatwasser Opsporing van storingen Attentie Technische kenmerken 70

Indice (IT)

Avvertenze di sicurezza Installazione Vista da vicino (pannello comandi) Come riempire del sale ? Come riempire del brillantante? Detersivo 34 34

Safety information

At time of delivery
Check packaging and dishwasher immediately for signs of transport damage. If the appliance is damaged, do not put it into use but contact your supplier or customer service without delay. Please dispose of packaging materials properly.
If your family includes children
The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. Keep detergents out of the reach of children, who must also be kept away from the dishwasher when it is open.

During installation

Site the dishwasher and connect it up in accordance with the installation instructions. The dishwasher must not be connected to the electricity supply while installation is being carried out. Ensure that the domestic wiring is properly earthed. The mains electricity supply must conform to the details shown on the dishwasher rating plate. Do not connect the dishwasher to the electricity supply via an extension cable. Built-under and built-in appliances should always be installed under a continuous work surface which is attached to the adjacent cupboards, in order to ensure that the appliance is entirely stable. After the appliance has been installed,the mains plug should still be easily accessible. Not on all models: The plastic housing on the water inlet contains an electrically operated valve. The connecting wires are inside the inlet hose.Do not cut through this hose and do not immerse the plastic housing in water. During installation, the power supply cord must not be bent or flattened.

If a fault occurs

If the appliance malfunctions, turn off water supply to the appliance and disconnect the plug from the wall socket. Then, consult the section entitled, "Fault finding".If you cannot solve the problem, contact a service center. Only specialised personnel are authorised to make repairs. If the supply cord is damaged, it must be replaced by the manufacture, its service agent of similarly qualified persons in order to avoid an electrical hazard. To maintain the EFFICIENCY and SAFETY of this appliance,we recommend: - call only the Service Centers authorised by the manufacturer. - always use original Spare Parts.
When disposing of old appliances
Appliances which are no longer being used must be made inoperable by cutting the power supply cord and removing the door lock. Take the appliance to a designated waste disposal center.
Dangerous voltage During normal use
The dishwasher must only be used by adults for the washing of household dishes and cooking utensils. This appliance cannot be installed outdoors, not even if the area in which it is installed is covered by a roof; it is also very dangerous to leave it exposed to the elements. Do not place any heavy objects or swing on the door when it is open. The appliance could tip forward. The water inside the dishwasher is not suitable for drinking. Do not use solvents of any kind inside your dishwasher. They could cause an explosion. Open the door very carefully if the dishwasher is operating. There is a risk of water squirting out. Do not touch the heating element during or after a wash cycle. Fundamental rules to follow when using the appliance: - Never touch the dishwasher when barefoot or with wet hands or feet; - We discourage the use of extension cords and multiple sockets; - If the appliance is not operating properly or maintenance must be performed, disconnect the appliance from the power supply. The door shall not be left in the open position since this could present a tripping hazard.


Safety of Children when disposing of your old appliance.Some packaging materials can be dangerous for children. There is a risk of suffocation, keep packaging materials away from Children. When disposing of old products remember to disable the door locking system by breaking or removing the door catch. and or hinges. This will stop children from locking themselves inside the product when playing. (Danger of suffocation).


Positioning the appliance
Positioning the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.


The dishwasher plug must be accessible even when the appliance is installed as a built-in unit so that maintenance can be done safely.
Getting to know your dishwasher
Close-up view (control panel) Dishwasher interior

a c b d h e f g

a Upper Rack b Lower Rack

g h i j k

Washing Filter Detergent and Rinse Aid Dispenser Water Inlet Hose with Aquastop Drain Hose Power Supply Cord
c Top Spray Arm d Silverware Basket
A ON-OFF Button B Programme Button

C Programme Indicator

e Bottom Spray Arm f Salt Container Cap

How to fill the salt

The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water.
Adjusting salt consumption
The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water used. This is intended to optimize the amount of salt consumption keeping it to a minimum. To adjust salt consumption, proceed as follows: Unscrew the cap from the salt container; There is a ring on the container with an arrow on it (see figure below ). If necessary, rotate the ring in an anticlockwise direction from the "-" setting towards the "+" sign, based on the hardness of the water being used.
Loading the salt into the container
Always use salt intended for use with dishwashers. The salt container is located beneath the lower rack and should be filled as follows: According to the Water Hardness Tabel, you can calculate the salt consumption setting, then load the salt. Remove the lower rack and then unscrew and remove the cap from the salt container. If you are filling the container for the first time, fill it with 1/2 a litre of water. Place the end of the funnel (supplied) into the hole and fill with about 2 kg of salt. It is normal for a small amount of water to come out of the salt container. Carefully screw the cap back on. Do not over tighten it.

It is recommended that adjustments be made in accordance with the following table: Water Hardness
Clarke Level degrees 0 NQ PS 14 PS TN


mmol/l M NIT QIQ UIV
Salt Selector c o n s u m p t i o n Autonomy (cycles/2kg) position (Grams/cycle) L =?J? jba ?H? M OM QM SM L SM QM OR 3


To prevent the formation of rust, load the salt just before beginning a wash cycle.


How to fill rinse aid

Rinse aid

This product makes dishes sparkle and helps them to dry without spotting. The dispenser is located on the inside panel of the door. When the low rinse aid indicator 1 is bright ,it means the rinse aid is low,you must refill the rinse aid dispenser. 1

Loading the rinse aid

Regardless of the type of detergent dispenser installed on your appliance, you must proceed as indicated below when loading the rinse aid. To open the dispenser, turn the "2" cap in an anti-clockwise direction and then pour in the rinse aid, making sure not to overfill. The amount of rinse aid used for each cycle can be regulated by turning the " 3" dose adjustor, located beneath the "2" cap, with a screwdriver. There are 6 different settings; the normal dosage setting is 3. 2 3
Proper dosage of the rinse aid improves drying. If drops of water remain on the dishes or spotting occurs, the dosage adjustor should be turned to a higher setting. If the dishes have white streaks, turn the dosage adjustor to a lower setting.
How to fill the detergent dispenser


Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Programme overview". The detergent dispenser is located on the inside panel of the door.

Loading the detergent

To open the " 4 " cover on the dispenser, press the " 5 " button. The detergent for the wash cycle should be poured into the " 6 " compartment. The detergent for the pre-wash cycle should be poured into the 7 compartment. After the detergent has been placed in the dispenser, close the cover and press down until it clicks in place.


To facilitate closing the cover, remove any excess detergent on the edges of the dispenser.
Not suitable for the dishwasher
What you should not put into the dishwasher
Cutlery and tableware manufactured in whole or part from wood.They become faded and unsightly in appearance.Furthermore,the adhesives that are used are not suitable for the temperature that occur inside the dishwasher.Delicate decorative glassware and vases,special antique or irreplaceable china. The decorative patterns on such items will not be dishwasher-proof. Plastic objects that are not resistant to hot water, copper and pewter utensils are also not suitable. Decorative patterns printed or painted onto the surface of crockery, glasses, etc.,aluminium and silver items tend to become discoloured or faded if washed in the diswasher. Some types of glass can become opaque in appearance after they have been washed many times in a dishwasher. Highly absorbent materials, such as sponges and towels,should never be placed in the dishwasher.
Damage to glassware and other dishes

Possible causes

type of glass or manufacturing process chemical composition of detergent water temperature and duration of dishwasher programme.

Suggested remedy

Use glassware or porcelain dishes that have been marked dishwasher-proof by the manufacture.Use a mild detergent that is described as kind to dishes. If necessary, seek further information from detergent manufacturers. Select a programme with a low temperature and a short duration as possible. To prevent damage, take glass and cutlery out of the dishwasher as soon as possible after the programme has ended.

Our recommendation

In future, only purchase table or kitchenware that has been confirmed as being dishwasher-proof.
Dishes or cutlery that have been soiled by tobacco ash, wax, Iubricating grease or paint, should not be put in the dishwasher.
Arranging crockery, glasses, etc. in the dishwasher
Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from becoming clogged, which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they are soaked before washed. This will eliminate the need for extra wash cycles. Pull out the rack to load the dishwasher.
How to use the upper rack

The upper rack is designed to hold more delicate and lighter dishware, such as glasses, cups and saucers, plates, small bowls and shallow pans (as long as they are not too dirty). Position the dishes and cookware so that they do not get moved by the spray of water. The upper rack can be adjusted for height by using the knobs located on both sides of the rack itself (see fig.G). Adjust the upper basket by pulling the end stops (Fig.F) outwards and remove the upper rack completely re-insert using the upper or lower wheels.
How to use the lower rack
We recommend that you place the most difficult to clean items on the bottom rack: pots, pans, lids, serving dishes and bowls, as shown in the figure to the right. It is preferable to place serving dishes and lids on the sides of the racks in order to avoid blocking the rotation of the top spray arm. Pots, serving bowls, etc. must always be placed face down(see fig.D). Deep pots should be slanted to allow the water to flow out. The silverware basket can be doubled (see fig.E) so that only one section may be used when the silverware load is light. This also makes space for additional pots and pans and it can also be placed in the upper rack. Silverware should be placed in the silverware basket with the handles at the bottom; if the rack has side baskets, the spoons should be located individually into the appropriate slots. Especially long utensils should be placed in the horizontal position at the front of the upper rack.

fig.D Normal daily load

Lean tall glasses and those with long stems against the shelf-not against other items to be washed.
Place glasses, cups and small bowls on the additional cup rack. The additional cup rack can be swivelled in or out as required(see fig.H).
knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.

Programme overview

Type of crokery Wash Type of e.g.china, progra- pots/pans, food mme cutiery, remains glasses, etc Detergent Amount Condition of of food food remains remains Description of cycle Rinse ExtenPre- Aid ded wash Wash Energy Duration consuin mption minutes in kWh Water consumption in litres

Intensive Wash


Normal Wash

Soups, casseroles, sauces, potatoes, pasts, rice, eggs, roast or fried food.

stuck on hard

Pre-wash with hot water. Extended wash at 70C. Rinses with cold water. 25g Rinse with hot water. Drying. Pre-wash use cold water. Extended wash at 55C. Rinse with cold water. 25g Rinse with hot water. Drying.
Laboratory measured valve in accordance with European Standard EN50242

Soups, potatoes,

Light Wash (EN50242)
pasta, rice, eggs, roast or fried food. Coffee, cakes, milk, sausage, cold drinks, salads

a little

Pre-wash use cold water. loosely Extended wash at 50C. 25g attached Rinse with cold water. Rinse with hot water. Drying.

Very little

loosely attached
Short wash at 40C. Cold rinse.

Rapid wash

Rinse off if the dishes have been stacked for several days in the dishwasher prior to washing.
Short cold wash to prevent food residue from drying on the dishes.
* EN50242 test with rinse aid setting 5

Care and maintenance

Regular inspection and maintenance of your appliance helps to prevent problems from occurring.This saves time and aggravation.You should therefore carefully inspect the inside of your dishwasher from time to time. Inspect the nozzles in the spray arms for blocked holes due to remnants of food. If necessary, pull the lower arm 11 upwards and lift it off. Unscrew the upper spray arm 10. Clean both spray arms under running water. Refit the spray arms. Ensure that the lower arm has locked into place and the upper one is screwed tight.
Overall condition of appliance
Check that no grease or scale has accumulated on the inside of the dishwasher. If you see any deposits: Clean the interior of the dishwasher thorughly with a detergent solution.


The filters 8, 9 prevent larger particles of food in the water from reaching the pump.These particles may occasionally block the filters. When the appliance has finished washing, check the filters for particles of food and, if required, clean. After undoing the coarse micro-filter 8 , the filter unit 9 can be removed. Remove any particles of food and rinse the filters under running water. Insert the filter unit 9 and tighten the coarse micro-filter.

Spray arms

Lime and remnants of food in the washing water can block the nozzles in the
spray arms 10 and 11 and the arm mountings.

Washing dishes

Programme selection
The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in the wash cycle table.The corresponding programme sequence, duration and consumption details are shown in the right half of the overview. For example: Use the normal programme for dishes and utensils which have plenty of food remains stuck on hard.

End of programme

Six beeps will indicate that the wash cycle has finished and all the programme indicators light.
Switching the dishwasher OFF
Several minutes after the programme has ended: Set main switch A to OFF. Open the door. Turn the water tap off. (Does not apply when Aquastop unit has been fitted) Remove dishes, etc. when they have cooled down.


If only a small number of dishes have been loaded into the dishwasher,selecting a programme that operates at the next lowest temperature will usually be sufficient.
Interrupping the programme
Open the door. Caution! There is a risk of water squirting out from inside the appliance. Do not open the door fully until spray arm has stopped rotating. When you open the door, the dishwasher will beep ten times every thirty seconds. If the appliance has already heated up or the hot water was switched ON and then the appliance door opened, leave the door ajar for several minutes and then close. Otherwise, the appliance door may open due to expansion.

Programme data

The stated programme data are based on standard operating conditions. The values can vary considerably according to: different amounts of dishes temperature of mains water supply pressure of mains water supply ambient temperature fluctuations in mains voltage machine-related factors (e.g. temperature, water volume,.) Energy and water consumption is reduced by up to 1/4 when dishes are washed in the upper basket only.The water consumption values are related to water hardness level 1.
Cancelling or modifying a cycle
A cycle that is underway can be modified if it has only been running for a short time. Otherwise, the detergent may have already been used, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled ( see the paragraph entitled, Loading the detergent ). To modify a cycle that is already underway, press the button A , all of the settings will be cancelled. To set a new cycle, follow the instructions contained in the paragraph entitled Switching the dishwasher ON.

C1 C2 C3 C5 C6

Switching the dishwasher ON
Turn on the tap. Set ON-OFF button A to ON. All the programme indicatorsC1,C2,C3, C5,C6light. Press programme button B1-6,programme indicator C1-6 blinks. If the door is closed, after 5 seconds, the programme indicator C1 lights steady and the dishwasher beeps once time, then the programme starts automatically.
How to keep your dishwasher in shape

After Every Wash

After every wash, turn off the water supply (not necessary for models with Aquastop ) the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside.

Moving the Appliance

If the appliance must be moved, try to keep it in a vertical position. If absolutely necessary, it can be positioned on its back.
One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will prevent this from occurring. The door should not be left in the open position since this could present a tripping hazard.

Remove the plug

Before cleaning or performing maintenance, always remove the plug from the socket. Do not run risks.
No solvents or Abrasive Cleaning Products
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Rather, use only a cloth and warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar, or cleaning product made specifically for dishwashers.

When You Go on Holiday

When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance.

Fault finding

Resolving minor problems yourself
Experience has shown that you can resolve most problems that rise during normal daily usage yourself, without having to call out a service engineer.Not only does this save costs,but it also means that the appliance is available for use again that much sooner. The following list of common occurrences and their remedies should help you identify the causes of most problems.

the problem. the model type number (Mod.) And the serial number (S/N.), which are indicated on the plate located on the side of the inner part of the door.
Lower spray arm rotates with difficulty
Spray arm is blocked by small items or food remains.
Problems..when the appliance is switched on
Appliance does not start up
Fault with fuse in mains electricity supply. Plug not inserted in wall socket. Appliance door not closed properly. Programme button has not been pressed. Water tap not turned on. Blocked strainer in water intake hose. - The strainer is situated in the Aquastop or supply-hose connection.
Lid in detergent compartment cannot be closed
Detergent compartment has been overfilled. Mechanism is clogged with remnants of detergent.
Indicator lamps do not extinguish after washing has finished
Main switch is still set to ON.
Remnants of detergent stuck inside dispenser
Compartment was damp when it was filled up with detergent. Compartment must be dry before detergent is added.
Water remains inside appliance after programme has ended
Blockage or kink in drainage hose. Pump is jammed. Filters are blocked. The programme is still running. Wait for the programme to end.


Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable equipment damage as well as danger to the user.
.with the appliance itself
Error display on the time-remaining indicator When all the programme indicators C blink. Have you checked whether:
the door is closed properly.

.during washing

Unusual amount of foam is creased
Normal washing up liquid has been poured into the rinse-aid container.
Remove any spilled rinse aid with a cloth as it could otherwise lead to excessive foaming during the next washing cycle.
Appliance stops suddenly while washing is taking place When the programme indicators C1,C2,C3 blink. Have you checked whether:

the water is turned on and the hose is connected properly; the water supply to the house is on and has sufficient pressure; the water supply hose is crimped or bent; C1 C2 C3 the filter for the water supply hose is clogged. the drain hose is too low. Cut off electricity supply to appliance. Water supply has been interrupted.
Knocking sound can be heared while washing is taking place
A spray arm is knocking against the dishes inside the appliance.
Rattling sound can be heared while washing is taking place
Crockery has not been stacked properly inside the appliance.
Knocking sound coming from inlet valves When the programme indicators C1,C3,C5 blink. Have you checked whether: C1
the drain hose is crimped or bent. the drain hose is too high.
This is caused by the way the water pipes have been laid and it has no effect upon the way the appliance functions. There is no remedy for this.
.with the dishes,cutlery, etc.
Remnants of food are stuck to the dishes, cutlery,etc.
Dishwasher was not loaded properly. Jets of water could not reach all parts of the dishes, ect. Too many items in the rack. Items in the rack were touching each other. Not enough detergent was added to dispenser. Selected wash programme was not intensive enough. Rotation of spray arm was obstructed by dishes, etc. N ozzles in spray arm are blokcked by remnants of food. Filters are blocked. Filters have been incorrectly fitted. Waste-water pump is jammed.
When the programme indicators C1,C2,C5 blink. Have you checked whether:
the drain hose is too low.
If you take all these checks and the dishwasher still does not function or your dishwasher has any other error display, you can power the dishwasher OFF, and wait a few minutes. You can power the dishwasher on, try it again , if the dishwasher still does not function and/or the problem persists, contact the nearest authorised service center and provide them with the following information:
Plastic items are discoloured
Not enough detergent was added to dispenser. Detergent has insuffcient bleaching properties. Use a detergent containing a chemical bleaching agent.
Tea stains or traces of lipstick have not been completely removed
Detergent does not have a sufficient bleaching effect. Washing temperature was set too low.
White stains are left on crockery, glasses have a milky appearance
Not enough detergent was added to dispenser compartment. Amount of rinse-aid was set too low. Although water is quite hard, no salt has been put in appliance. Water softener was set too low. Lid on salt container is not screwed tight. If you used a phosphate-free detergent , try a detergent containing phosphates and compare results.
Traces of rust on cutlery
Cutlery is not sufficiently rustproof. Salt content in washing water is too high. - Lid on salt container is not screwed tight. - Too much salt was spilt while filling container.

Glasses become clouded and discoloured; coating cannot be wiped off
Unsuitable detergent was used. Glasses are not dishwasher-proof.
Dishes,cultlery,etc.have not been dried
Selected programme did not include drying function. Amount of rinse-aid was set too low. Items were removed from dishwasher too soon.
Smears left behind on glasses and cutlery; glasses have acquired a metallic appearance
Amount of rinse-aid set too high.
Glasses have a dull appearance
Amount of rinse-aid was set too low.

Important information

Notes on waste disposal
Old appliances still have some residual value. An environment-friendly method of disposal will ensure that valuable raw materials can be recovered and used again. When an appliance has reached the end of its working life,unplug it from the mains.Cut through the mains cable and dispose of it together with the plug. Destroy the door locking mechanism. This will ensure that children at play cannot become locked inside and are not exposed to the risk of suffocation. Your new appliance was protected by suitable packaging while it was on its way to you. All materials used for this purpose are environment-friendly and can be recycled. Please make a contribution to protecting the environment by disposing of the packaging appropriately. Do not allow children to play with any parts of the packaging. There is a risk of suffocation by the cardboard boxes and the plastic wrapping. Up-to -date information concerning options for disposal can obtained from your retailer or local municipal administration.
Information on comparability tests implemented in compliance with EN 50242
Appliance loaded in accordance with standard specifications. Example of loaded dishwasher: See Fig 1 , 2 and 3. Capacity: 12 place settings Comparability programme: Light wash Rinse-aid setting: 5 Detergent: 25+5g

General information

Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited as free-standing appliances cannot topple over. This can be achieved by bolting the dishwasher to the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards. For Switzerland only: There are no restrictions on installing the appliance between wooden or plastic walls as part of a fitted kitchen. If the appliance is not plugged into a



Combo 27F520T Super TC-14S3RP KLV-21SG2 Samsung 244T Spider Engine RC TX1504 IN 1 Simulator 3 TD-V75120E CFD-S26 Sbcru252 28PT7304 Thinkpad 1400 Nikon F50D NWZ-S755 Adat-RMB EW1248W Armband Pool 3 SPH-M900 Rocker PSL01A Escalade 1999 VGX-TP3z B MR350 MPK-THD Wl-537 Avtl 83 L-80 USB SA-TX50 Express 3 C5950 HQ6990 16 DT-540 F1-4000T UE-46B7000 Viewfinder PM5 P2050 NV-GS44 AUB300I WZR-G108 FY760 WL-400 Scpt860 Series Alive NEC 2000 Treo 180 WF-660 ICD-55 Dslr-A230 EP 4X Frame Control Unit PT-LC56E RM4211 MJU 700 Command IC-F5061 VSX-C502 TR-505 LX-U250D SL-D3 Adapter-d300 32PFL5322 KD-R311 Motorola T192 Premio Flashmate IC-M3euro CGX20 M2N-SLI CSP92 AFK BM-3 Black Deluxe WM2010CW KDC-3027 Pavilion 400 Rally 200 SGH-C266 KH 8090 WF-A50SW Motorola D800 Review TX-28LD1 F1DK102P Autopilot LN46A650 4 0 Motorola 3300 TL-01 RIO 500 Keyboard HVL-F32X FJ1200S KRF-V7010 AP610N


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101