HD Ready Digital LCD TV and HD Ready Digital LCD TV/DVD Combi

USER'S MANUAL

Please read this manual carefully before using your television and keep this manual for future reference.

CONTENT

Safety Notice....2 Front Panel Control... 3 Connection... 4 Remote Control... 5 Installing Batteries... 6 Connection Instructions... 7 Grounding... 7 External equipment connections... 7 Antenna Connection... 7 VGA Input.... 8 YPbPr Input... 8 S-VIDEO Input.... 9 SCART Input...10 CI Card Input...10 HDMI Input.... 10 Basic Operating Instructions...11 Turn on the LCD-TV...11 Inputs selection... 11 V+/V-... 11 Mute.... 11 Sound Mode... 12 Select the TV Channel...12 Picture Mode.... 12 Program Swap... 12 Sleep/Scan/Zoom... 12 Menu Operations...13 Picture Menu Options...14 Sound Menu Options... 15 Function Menu Options...16 Lock Menu Options... 17 Lock Menu Options Continued... 18 Tuning Menu Options... 20 Tuning Menu Options Continued.. 21 Time Menu Options... 23 Time Menu Options Continued... 24 TELE TEXT.... 25 Basic Playback... 27 Advanced Playback... 28 Special Function Playback... 29 JPEG DISC PLAYBACK.. 29 SCREEN SAVER FUNCTION... 29 DVD System Setup... 30 General Setup Process... 30 General Setup Page.... 31 Preferencel Page... 32 Playable Discs.... 34 Disc Protection and DVD Characteristics.. 35 Streaming Media Playing System..36 Troubleshooting Guide... 41 Specifications... 42
Note: DVD is only available for certain models, please refer to actual products

Safety Notice

To prevent fire or electric shocks please read the instruction before installing, using and cleaning the television. Please read all the instructions before operation; Please keep the manual for future reference ; Do not use any accessories that are not recommended by the manufacturer: Before operation, make sure the operating voltage of this unit is corresponds with your house electrical supply; Do not place the unit on unstable or in dusty and humid places; Never put the unit in direct sunlight or near heat sources; Allow enough space for proper ventilation; Please keep water away from the LCD-TV. If water comes in to contact with the LCD-TV, disconnect the power cord from the power source, then wipe the set with a dry soft cloth; Do not remove the back cover. If servicing is required , please refer to customer helpline.

Front Panel Control

SOURCE

VOL- VOL+ CH-

STANDBY
(The figure above and the description of the button may be d ifferent, all picture in this manual is just for reference, please see the actual set.)

Control Panel Function

1. Standby switch 2. SOURCE Call the Input Source menu/Confirm button when operation menu. 3. MENU Press to select the main menu 4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ Volume up / Right orientation to adjust the item/Press to enter 5. CH- TV channel down / to select the item in the menu CH+ TV channel up / to select the item in the menu 6. Power indicator 7.Remote Sensor

Connection

OPEN/CLOSE

DVD insert

PLAY/PAUSE STOP PREV NEXT
(Please refer to actual product of the DVD slot and buttons)
Just take one TV with DVD for example, please see the real)
Y TV SCART HDMI Pb Pr Common Interface USB

S-VIDEO

L AUDIO R

VGA IN PC AUDIO IN

COAXIAL ANT IN

ANT IN

COAXIAL

PC AUDIO IN

VGA IN

R-AUDIO-L

TV SCART

Common Interface

USB HDMI Connect to HDMI output of other equipment TV SCART YPbPr Connect a component video/audiodevice to these jacks Common Interface S-VIDEO Component/S-Video Audio Input AUDIO IN VGA IN Connect to the VGA 15PIN analog output connector of the Pc display card for PC display purpose PC AUDIO IN Connect the PC outpu tconnec tor from a PC to the audio Earphone port COAXIAL ANT IN Connect cable or antenna signals to the TV, either direc-tly or through your cable box.
Remote Control (for TV/DVD Combi)
When using the remote control, aim it towards the remote sensor on the TV
Buttons on the remote control

Stand By DVD Menu

D.MENU OPEN/CLOSE
DVD open/close Picture Mode Sound Mode Call Screen Display Sleep button DVD Audio/DTV Audio/NICAM ARC button Program Number Channel selection Source Exchange Q.VIEW V+/V- :Volume selection P+/P-:Channel selection Mute GUIDE Button

P.MODE S.MODE

SLEEP ARC

AUDIO SUB TITLE CH.LIST

Q.VIEW

EXIT BACK

REPEAT

PLAY/PAUSE

REVT FWD

PREV NEXT

SET UP

SEARCH

PROGRAM
Menu button Cursor Mover Button DVB-T favourite Exit Screen Display Back button (only for USB) Zoom(only for DVD &USB) Play/pause button(only for DVD &USB) Teletext index/STOP(only for DVD &USB) REPEAT(only for DVD &USB) FAST FORWARD(only for DVD &USB) PREVIOUS(only for DVD &USB) FAST REVERSE(only for DVD &USB) NEXT(only for DVD &USB) DVD SET UP/ TEXT
DVD TITLE/TELETEXT MIX DVD SEARCH/TELETEXT SUBCODE DVD 10+/TELETEXT HOLD DVD PROGRAM/TELETEXT REVEAL DVD CALL/TELETEXT MODE DVD A-B REPEAT/TELETEXT SIZE DVD ANGLE/TELETEXT TIME OK Button

D.CALL

Installing Batteries
1.Open the cover of the battery compartment at the back of the remote control. 2.Insert two AAA alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment.

Precautions

Make sure that there is no obstacle between the remote controller and television set. As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.
Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.
Make sure that two AAA 1.5V alkaline batteries are loaded. The batteries must be of the same type. The batteries must be located properly. The batteries are not rechargeable. If your TV is to be stored for a period of time, remove the batteries from the remote control.

Connection Instructions

Grounding
Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
External Equipment Connections

Antenna Connection

- Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments (Connect to wall antenna socket) wall antenna socket
RF coaxial wire (75 ohm) VHF antenna UHF antenna
outdoor antenna Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)
Be careful not to bend the bronze wire when connecting the antenna.
To improve picture quality in a poor signal area, purchase and install a signal amplifier. If the antenna needs to be split for two TV s, install a 2-Way Signal Splitter in the connections. If the antenna is not installed properly, contact your dealer for assistance.
NOTE: All cables shown are just for example.

VGA Input

You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off; 3.Connect a D type 15-pin VGA interface VGA IN cable ( not supplied ) to the VGA video interface connector on the PC. Then connect the other end to the PC video interface connector on the back of the LCD-TV.Tighten the screws on the VGA connectors once they are firmly connected, connect the audio cable(not supplied)to the audio input on the back of your LCD-TV; 4.Turn on the power of the LCD-TV first , and then turn on the power of the PC; 5.Set the video input mode of the LCD-TV to PC; 6.Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card cannot be changed,change the PC graphic card or consult the manufacturer of the PC graphic card.

HDMI Input

HDMI Devices
Connect the cable from the HDMI devices to the TV HDMI, as shown in the figure.

How to use

1. Set the mode of the LCD-TV to HDMI. 2. Operate the corresponding external equipment. Refer to external equipment operating guide.
Basic Operating Instructions

Turn on the LCD-TV

When the POWER(STANDBY) button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER(STANDBY) button, the LCD-TVwill go into standby mode and the indicator light turns red. You can also turn on the TV from standby mode by pressing the digits(1-9) or P/P+.
The display will appear on the screen when the TV is turned on for the first time: Press / to select the language you want, then press / to select the Auto Search and OK to enter the submenu: press / to select the country you are in, then press / to move to the following item and / to select Start , then press OK to confirm. All channels will be stored after the searching.
Installation Guide Language English Auto Search
Please select country first Then select Start to update info. Country selection Start UK Cancel

Inputs selection

Press SOURCE button to display the Source menu. Press / button to select the inputs you need and the TV will turn to the source automatically in 3 seconds or press OK to confirm.
Source DTV TV SCART Component PC HDMI S-Video DVD

EXIT OK

Press the V+/V- button to increase/decrease the volume and there will be display on the bottom of the screen.
1.Press the MUTE button to mute the sound temporarily. A mute icon appears on the screen. 2.Press the MUTE button again or V+ to restore the sound. The mute icon disappears.

Sound Mode

Press S.MODE button on the remote control for menu display. For desired mode as follows: Standard Music Theatre Voice Personal

Select the TV Channel

You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the P+/P- keys on the remote control or on the TV set to make a selection.

Picture Mode

Press P.MODE button on the remote control for menu display. For desired mode as follows: Standard Mild Personal Fresh
1 Suppose the TV set is in channel 8 just now and in channel 18 now. 2 If you want to return to the last watched program in channel 8, you can simply press the Q.VIEW button. 3 If you want to return to channel 18, press the button again. Through this function, you can easily change between the channel you are watching and the channel you watched just now.
Press SLEEP button to set the sleep timer among Off/10min/20min/30min/60min/90min /120min/180min/240min.
Press to zoom the picture.

Menu Operations

1. Press MENU button to display the main menu, and / to select the main menu. 2. Press / to scroll through the options 3. Press / buttons to make changes to the parameters 4. Press MENU to exit the menu step by step 5. Press the EXIT button to exit the menu

PICTURE MENU SOUND MENU

PICTURE
Video Mode Contrast Brightness Colour Sharpness Tint EXIT MENU OK Personal 0
Audio Language Audio Mode Treble Bass Balance AVL EXIT MENU OK English Personal 0 Off

FUNCTION MENU

LOCK MENU

FUNCTION

Language Subtitle Language Display Mode Blue Screen Software update Carry out system update Reset EXIT MENU OK English English Auto Off Off V1.1
Change Password Menu Lock Program Set Program No. Source Lock Child Lock EXIT MENU OK Off Off 1 Off

TUNING MENU

TIME MENU

TUNING

Auto Search DTV Manual Search ATV Manual Search Tuning Program Guide CI Information EXIT MENU OK Clock Off Time On Time Sleep Time Zone
-- -- -- -Off Off Off London GMT
NOTE: Using your remote control to navigate in the on-screen menus. The on-screen menus shown in this manual may be different from those on your TV. These are example to illustrate your TVs operation.

Picture Menu Options

Picture quality can be adjusted for any input separately. The picture quality on the screen can be adjusted as follows: 1. Press MENU button and / until the picture menu appears on the screen. 2. Press / button to enter the picture menu and go up and down to select the desired option. 3.Press / button to increase and decrease the level to match your preference. 4. Repeat step 2 and step 3 until desired picture quality has been achieved. Functions: Video Mode: Press / to set the picture mode. Contrast : Used to set the contrast balance of the picture. Brightness : Used to set the brightness level of the picture. Colour : Press / to adjust the colour saturation of the picture. Sharpness : By increasing the level, it will show cleaner and clearer images and by decreasing the level, it will make picture smoother. Tint(Only available in NTSC): Set the colour tone of the picture. Colour Temperature : Press to select the colour temperature from Normal/Cool/ Warm. Noise Reduction: Adjust the quality of the picture by selecting Off,Low, Middle,High. PC Adjust (can be adjust only in PC mode and there is PC signal): Press OK button to enter the submenu. Press / to adjust the value.

Auto Sync H.Position V.Position Size Phase EXIT

MENU OK

Auto Sync: Adjust the picture location frequency and phase parameters automatically in PC. H.Position: Picture horizontal adjust. V.Position: Picture vertical position adjust. Size: Adjust the size of the LCD to match the PC input source. Phase: Removes any horizontal distortion and clears or sharpness the displayed characters.

Sound Menu Options

Sound can be adjusted as follows: 1. Press MENU and / button until the following menu appears on the screen
2. Press / button to enter the sound menu and up and down to / select the desired option. 3.Press / button to increase and decrease the level to match your preference. 4. Repeat step 2 and step 3 until desired sound quality has been achieved. Functions : Audio Language(only available in DTV mode) : Press OK to enter the submenu. Then press / to select the Primary and the Secondary item and press to select the language you need. Audio Mode : Press / to select among Music/Theatre/Voice/Personal/ Standard. Treble : Increases or decreases the level of the treble sounds. Bass : Increases or decreases the level of the bass sounds.
Note: Bass and Treble can be adjust in any audio mode, and if the numerical value is changed, the audio mode will be changed to personal automatically.
Balance : Adjust the audio output between left and right speakers. AVL: Automatic Volume Limit Control. Reduces the differences in volume level between different broadcasters.

Function Menu Options

1. Press MENU button and / until the following menu appears on the screen.
2. Press / button to enter the function menu and go up and down to select the desired option. 3.Press / button to increase and decrease the level to match your preference. 4. Repeat step 2 and step 3 until desired function quality has been achieved. Functions: 1. Language: Used to set the language of the on-screen display. 2. Subtitle Language (in DTV mode only): To switch the subtitle languages. 3.Display Mode: Used to set the aspect ratio of the display. Choices include Auto /Full Screen/Zoom1/Zoom2/4:3( Display mode may differ from different inputs. ) 4. Blue Screen(in ATV mode only): Used to turn the blue screen option On or Off. With the option on, your TV screen turns blue after 3 seconds without an input signal. 5. Reset : Press OK button to enter the dialogue Are you sure? And press / to select Yes, then press OK button to reset the TV setting to factory default.

Max Volume Initial Volume Channel Lock Clear Lock Parental Lock 100 Off
Max Volume: Press / to adjust. If a certain value is set, when volume is being adjusted, the sound value can not exceed that maximum volume value. Initial Volume: Used to memory the volume you have set when you turn on our TV after turn off it. Channel Lock: Press OK button to enter the submenu. Press / to select the program you want to Lock. The colour of the circle is corresponding with the buttons on the bottom of the remote control. LOCK: to lock the program by pressing the green button and press again to unlock. If a channel is locked, the password is required to be input when you select the channel. (The initial password is 0000) MENU: Exit the screen step by step. EXIT: Press EXIT to exit the screen. OK: Press / to select the channel and then press OK button to enter it. Clear Lock: Press / to unlock all set modes, setting all lock options to off, and the maximum volume returns to 100. Parental Lock: Press / to change the setting. To enable setting specific program blocks according to different ages.

Tuning Menu Options

1. Press MENU and / button until the following menu appears on the screen
Auto Search DTV Manual Search ATV Manual Search Tuning Program Guide CI Information EXIT MENU OK
Note: This menu only appears in TV and DTV mode. 2. Press / button to enter the tuning menu and go up and down to select the desired option. 3.Press / button to increase and decrease the level to adjust the selected option to your preference. 4. Repeat step 2 and step 3 until desired quality has been achieved. Functions: 1. Auto Search: Auto search the TV signal source for available channels, then put them in memory. Press / to select the item. Then press OK to confirm. The on-screen menu appears :
Auto Search Please select country first DTV Manual Search Start to update info. Then select ATV Manual Search Tuning Program Country selection UK Guide CI Information Start Cancel EXIT MENU OK
Press / to select the country and press / to select Start and then press OK to confirm, the following will appears on the screen:
Tuning Menu Options Continued
Channel Tuning 32%. 687.25MHz TV

TV DTV Radio

: 12 Programme(s) : 0 Programme(s) : 0 Programme(s)
Press<Menu> to skip. Press<Exit> to exit.

EXIT MENU

You can press EXIT button to enter the submenu and then select Yes to exit the tuning absolutely. The first time you press MENU button the menu will display on the screen, and you can select Yes ,the ATV tuning will be skipped.

Do you want to skip ATV tuning? Yes No
The second time you press MENU button the menu will display on the screen, and you can select Yes ,the DTV tuning will be skipped.
Do you want to skip DTV tuning? Yes No
DTV Manual Search: Press OK button to display the submenu. After selecting DTV channel number, press OK again to start to search digital channel and you can press EXIT to exit the search. ATV Manual Search: Press OK button to display the submenu. Press / to select the item and / to adjust.
ATV Manual Search Storage To 3 System DK Current CH 3 Search Fine-Tune Skip Off

Frequency EXIT SAVE

424.75MHz
Select System among DK/L/BG/I and set the Current channel. Then select Search and press / to start it. Select Fine-Tune and adjust it to improve the picture. After these operation you could select Storage To to set the channel number you want to save. Then press the red button to save the adjustment or press EXIT to exit it.
Tuning Program: Press OK button to enter the submenu. Press / to select the program you want to edit. The colour of the circle is corresponding with the buttons on the bottom of the remote control. NAME(only available in ATV ): to rename the analog channel by pressing the red button. Then press / to input the characters and press / to select the position. FAV: to set the favourite program by pressing green button and press again to cancel. MOVE: press yellow button after you selected a channel (eg.1), then press / to move the channel selected to the channel number (eg.9) you want to place. Then the two channel program will be exchanged. SKIP: to skip the channel when press P+/P- button by pressing the blue button and press again to cancel. Guide( in DTV mode only): Press OK button to enter the submenu.
PROGRAMME GUIDE 10 Mar 2008 15:04 DTV
5 five 16 QVC UK Gold bid-up.tv TCM UK Style
DTV 23 bid-up.tv 10 Mar 16:30
The street of San Fra. No Information Gold Workshop With Jan Spanish Funstamps No Information No Information No Information No Information INFO Schedule DATE Reminder OK
The colour of the circle is corresponding with the buttons on the bottom of the remote control. EXIT : Press EXIT button to exit the screen. INFO: Press / to select the program and then press INFO button to display the program information. Schedule: Press the green button to display the schedule you have set. DATE: Press yellow button to enter the submenu, then press / button to set the date. You can press yellow button again to back to the menu. Reminder: Press blue button to enter the submenu.
Reminder 10 Mar 2008 14:58 Programme Hour Minute Mode Date Month

EXIT Schedule MENU

5 Five Once Wed.21 Mar
Program: Press / to select the program you want to watch. Hour/Minute/Date/Month: Press / to set the time. Mode: Press / to select Once/Everyday/Weekly. If Everyday selected, the Date and Month will not be available. After the operation above, press OK to reminder or press green button to display the schedule you have set. CI Information: insert a card first and CI Module Inserted will be on the screen. After selecting CI Information, press OK to access the card menu. Refer to the module instruction manual for setting details. When module is removed, the CI Module Removed will be on the screen.

Time Menu Options

Clock Off Time On Time Sleep Time Zone -- -- -- -Off Off Off Lisbon GMT
2. Press / button to enter the time menu and go up and down to select the desired option. 3.Press / button to increase and decrease the level to adjust the selected option to your preference. 4. Repeat step 2 and step 3 until desired quality has been achieved. Functions: 1.Clock( can not be adjusted in DTV mode): Press OK button to enter the submenu.
Time Menu Options Continued
Clock Off Time On Time Sleep Time Zone Date -- -- --29 -Month 5 Off Year 2008 Hour 18 Minute Lisbon 32 GMT Close EXIT MENU OK
Press / to select the item and / to adjust, if you have finish the adjustment, select Close and then press OK to exit. Off Time: Used to set the time that the TV goes off automatically. Press OK button to enter the submenu as follows:
Clock Off Time On Time Sleep Time Zone Repeat Off -- -- -- -Hour 00 Off Minute 00 Lisbon GMT Close EXIT MENU OK
Press / to select Repeat and / to select the frequence, then set the hour and minute. (The Hour and Minute can not be available when Repeat is off). If you have finish the adjustment, select Close and then press OK to exit. On Time: Used to set the time that the TV comes on automatically. And the operation is the same with the Off Time above. Sleep: Press / to set the optional sleep timer. Time Zone: Press / to set the optional time zone.

TELETEXT

Teletext is an information system, broadcast by certain channels, which can be read like a newspaper. It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc.).
Note: The teletext buttons could be working even if there is no teletext signal, but there is no teletext display.

Teletext

Teletext functions
To select teletext press the TEXT button on the handset. To switch off teletext, press the button again. Note all menu functions are not available in teletext mode. Only a few direct button control functions are available in teletext mode, they are: Volume adjustment Mute function Page up/down Use the P+/P- buttons to browse next or previous page.

Previous and Next

During playback, press PREV key can go back to the beginning of this chapter, then each press of this key will skip a chapter till the start of the disc. (note: Disc function may vary depending on disc format) Each press of NEXT key during playback will skip the current chapter and play the next one. 1. Place the DVD in the disc slot as figure above. The disc will be loaded automatically after one to two seconds, then the DVD player reads the DVD and displays the opening menu. If there is no disc placed on the disc slot in DVD mode, OPEN will display on the screen all the times) There is only one disc size can be loaded in the disc slot. Do not place a disc which is unplayable in this DVD player. Some disc may not playback automatically, you can press PLAY/PAUSE button to start playback. 2. Some disc may start playback with a menu, use the cursor button on the remote control to select menu options and press PLAY/PAUSE to start, or press digits to select a menu options directly.
Fast forward and Fast reverse
1. Press FWD to fast forward through the disc. Each time the FWD button is pressed, the fast forward motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal. 2. Press PLAY/PAUSE to resume normal playback. 3. Press REV to fast reverse through the disc. Each time the REV button is pressed, the fast reverse motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal. 4. Press PLAY/PAUSE to resume normal playback.
Press this button can zoom enlarge or lessen the picture.
Each time pressed the picture times will be change.
In zoom mode press navigation buttons to move the picture displayed on the screen

Pause playback

1. Press PLAY/PAUSE to pause playback (still mode). The sound will be muted during still mode. 2. Press PLAY/PAUSE to resume normal playback.
Advanced Playback Advanced Playback
IMPORTANT NOTE: ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION AND DISPLAY ON SCREEN MAY DIFFERENT.

SUBTITLE

Press " SUBTITLE ", the screen will display "SUBTI-TLE 01/XX XXXXX", "01" indicates the ordinal number of this language; "XX" indicates total number of language; "XXXXXX" indicates the language of country. (the number of language depends on disc). This function can select up to 32 languages displayed on screen.
When playing discs, press " PROGRAM " to enter program mode. Press the digit buttons to select the program number that you want. When finished, move the cursor to select "START". This will start the program playback. If you want to cancel this function, press " INDEX " , then press PLAY/PAUSE .

SEARCH REPEAT

Press REPEAT button multiple times to reach desired play mode: DVD Chapter repeat, Title repeat, All repeat CD Single-play current track, Repeat One-repeat current track, Repeat Folder-repeat current folder, Folder-play current folder. Press "SEARCH" once to display the search menu. Use the up/down navigation buttons to select the item you require. Press PLAY/PAUSE to confirm (CD press the search button several times to select the item). And then press the numeric buttons or navigation buttons to input the item you require. Press PLAY/PAUSE to confirm.

.General Setup Page.

. Tv Display 4:3 LB 4 3/Ps. Angle Mark On 4 3/Lb Osd Lang ENG Caption On Screen Saver Off
or 3.Press CH+/- bu to select then press OK to confirm.
4.Press SETUP repeatedly to exit the set-up menus.

PLAY OK

.Preference Page.
TV Type Parental Password Default

PAL AUTO NTSC

General Setup Page

ASPECT RATIO DESCRIPTION

When using the DVD with the internal TV, select 4 3/LB.
The following information applies only when the DVD output is connected to an external TV.
. Tv Display 4:3 LB 4 3/Ps. Angle Mark On 4 3/Lb OSD Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On
4 3/PS (PS = Pan and Scan) You may select this if you have a normal aspect ratio (4:3) TV, although the NORMAL /LB (letter box) is a more common choice. In PS mode, widescreen material will fill the screen, but at the expense of chopping off extreme left and right edges of the original film picture. For this feature to work, the disc must be specially coded. Such discs are uncommon. 4 3/LB (LB = Letter Box) You may select this if you have a normal aspect ratio (4:3) TV. Widescreen material will be shown in pure unaltered form, allowing the entire picture area of the original film to be viewed without any side cropping. Black bars will appear above and below the picture. You may select this if you have a widescreen (16:9) TV. Back bars may still appear above and below the picture even if using a widescreen TV. This is because some film directors prefer to use ultra widescreen aspect ratios e.g. 2.35:1. This will normally be indicated on the DVD packaging.
DVD System Setup(Continued)
DVD System Setup General Setup Page
Angle Mark: Users can select a particular camera angle when playing a DVD which offers. multiple angles.
This item allows you to set Angle Mark On or Off.
Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On

On Off

On Screen Display (OSD) Language: Users can select on-screen display language.
Tv Display 4:3 LB Angle Mark On OsdLang ENG Caption On Screen Saver Off Hdcd Off Last Memory On

English French

(The languages you can select may differ from different countries or models)
.General Setup Page. Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On
Caption: This function allows you to display or hide the caption.
Screen Saver: If the screen saver is on,then there will be an animated picture of DVD on the screen whenever the DVD player is idle for more than 3 minutes.

Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption.General SetupOn Page. Screen Saver Off On Hdcd Off Off Last Memory On
Hdcd: When default setting is off, it will display CD by reading HDCD, for HDCD playback, please choose 1X or 2X.
Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption.General SetupOn Page. Screen Saver Off Hdcd Off Off Last Memory On 1X 2X.General Setup Page.
Last Memory: Memorize the chapter you have just watched. When last memory is on, if you turn on the DVD again after off it will display form the chapter you watched when you turn off the DVD.
Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption.General SetupOn Page. Screen Saver Off Hdcd Off Last Memory On On Off
DVD System Setup Preference Page
The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played.
TV Type: This player supports different TV output, including AUTO, NTSC, and PAL systems. Usually please set to MULTI.
Parental: The parental control function works in conjunction with the different censorship classes assigned to DVDs. These classes help to control the types of DVDs that the family watches, There are up to 8 censorship classes for DVDs.
2G 3 Pg 4 Pg Pgr 6R 7 NcAdult Off
Note: 1 To change this setting you must enter your password. (Initial password is 1234) 2 When set to Off, all discs may be viewed.
Password change: You can change your password by entering 4 digits. Your must confirm the 4 digits before the new password can be accepted.

Auto Change

Old Password New Password Confirm Pwd
NOTE:If you forget your password or a password is accidentally set enter 1369 as the password. This will enable you to regain control.
Default: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press OK to perform the reset.
Note: Some functions may not be available depending on the type of disc.

Playable Discs

The following discs can be played:
Support discs: DVD, CD-R, CD-RW, HDCD, JPEG, CD+G, Kodak CD , W MA.
You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labeled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases, their performance may not be very well or even not playable.

Dics Protection and DVD Characteristics
Compare DVD disc with other discs:
Encode method Digital/MPEG

Analog

Capacity
Singleside singlelayer 4.7G
Double -side single -layer 8.5G
Singleside doublelayer 9.4G
Doubleside doublelayer 17G Single-side 60 minutes 484 minutes double-side 120 minutes 30cm/20cm
266 Playing Time minutes minutes minutes

Disc diameter

Horizontal resolution Picture proportion Subtitle

More than 500 line

No more than 430 line
Multiple kinds 32 kinds 48KHz, 96KHz/ 6, 20, 24bit
One kind 16 kinds at most 44.1KHz/ 16bit

Sound quality

Start/Exit Streaming Media Playing System 1. Press SOURCE on the remote control unit to select the streaming media function.
2.Insert USB equipment into corresponding USB interface 2s after starting the system.
3. After entering the system menu, press Left / remote control unit to select the require USB equipment selection and enter the interface.
Right on the press OK button to confirm the
4. Press Left / Righr to change pages then press UP / DOWN on the remote control unit to select the required file, press OK button to enter the selected file.
5. To exit the streaming media playing system and watch a TV program, you must press BACK button to return to the streaming media main menu at first(to protect equipment), and then press SOURCE to select TV to return to the TV mode.
Notes: 1.While playing non-pictures or non-music files, press MENU or SOURCE,the TV screen will be black and display corresponding menu. 2.While playing a USB ,press BACK, the screen picture will return to USB main interface, and only at this time you can switch corresponding signal sources by pressing SOURCE again.
Streaming Media Playing System
Operating Method of Screaming Media Menu
1. Press UP / your desired option. DOWN to scroll through main menu or submenu and select
2.Press OK to confirm your selection.
3.Press (FWD)/(REV) to achieve the FWD (fast forward) and REV (fast back) of the music being played. 4. Press "PLAY/PAUSE" to play and press it again to pause playing.
5.Press ZOOM to magnify pictures; in zoom mode, press UP / DOWN to move the picture.

Left /

Right and
6.Press to stop playing ,or return to the previous menu, and press BACK repeatedly to return to the main menu. NOTE: You can choose the photos or music in different files to play together.

Playing a Picture

1.After entering USB main interface, press Left / Right to select PHOTO item.
2.Press OK to confirm the selection and enter the picture playing interface.
3. Press Left / Righr to change page and press UP / DOWN to select the picture you want to play press OK to enter the playing display interface, and then press PLAY to paly the pictures.

Specifications

Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations.
Model Picture, sound system Audio output External input port Power requirements Power consumption Temperature

15 15.4

PAL/SECAM-B/G,I,D/K,L,L

1.5W+1.5W

COMPONENT input PC input S-VIDEO input Audio input SCART Antenna input HDMI input ~150-240V 50/60Hz 50W 60W
Working:5 C~35 C Storage:-15 C~45 C Working:20%~80% Storage:5%~90%

Humidity

Accessories
Remote control Batteries Owner's manual
Note: All specifications are subject to change without notice. All quality are approximate value.

AUTO AD

DISPLAY

SOURCE DTV/TV

P+ VS SM

MENU Sound mode Zoom

TELETEXT BUTTONS

PSUBCODE MIX MODE HOLD

DVB-T MENU

REVEAL SIZE TIME INDEX

TEXT BUTTON

DVB-T EPG button

D.MENU TEXT EPG
DVB-T ok button DVB-T SUBTITLE DVB-T Cursor Move button DVB-T favourite

UP LEFT DOWN RIGHT

FAV INFO EXIT
Exit Screen Display RED button Green button Blue button Yellow button (Language fast button in DTV)

DTV/RADIO LANG TIMER

DVB-T information button
Fast text button in analog signal Function button in DVBT (just reference the OSD)
Note: the instruction on this manual is taking TV/DVD combi remote control as an example.

(For TV /DTV Models)

Remote Control Key Functions

Installing Batteries

1.Open the cover of the battery compartment at the back of the remote control. 2.Insert two AA alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment.

Precautions

Make sure that there is no obstacle between the remote controller and television set. As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.
Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.
Make sure that two AA 1.5V alkaline batteries are loaded. The batteries must be of the same type. The batteries must be located properly. The batteries are not rechargeable. If your TV is to be stored for a period of time, remove the batteries from the remote control.

Connection Instructions

Grounding
Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
External Equipment Connections

Antenna Connection

- Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed.

S-VIDEO Input

- To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.Read the user guide supplied with your AV devices and ensure that it has S-Video connectors; 2.Make sure that the power of the LCD-TV and the AV device are switched off;
Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Connection Option 2 1. Connect the audio and S-VIDEO cables from the VCR's output jacks to the TV input jacks, as shown in the figure. 2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) 3.Turn on the power of the LCD-TV first ; and then turn on the power of the AV device; 4.Press the SOURCE button to set the video. input mode of the LCD-TV to S-VIDEO mode.

SCART Input

1.Connect the scart lead from the external device(DVD players, settop boxes or game consoles, to the TV SCART socket. 2.Press SOURCE to select SCART mode. 3. Press Play button on external equipment and it should appear on the screen.

External equipment

HDMI Input

HDMI Devices

Connect the cable from the HDMI devices to the TV HDMI, as shown in the figure.

How to use

1. Select the HDMI source by using the SOURCE button on the remote control. 2. Operate the corresponding external equipment. Refer to external equipment operating guide.
HDMI Devices Note: The audio cable included with the TV should be used when connected with PC/ COMPONENT/S-VIDEO.

Wall Mounting

Use 4 machine screws(M4x8mm not included) to mount the TV on the Bracket(not included) For the Wall Bracket-Refer to the user instructions supplied with the wall bracket(not included)
Remark: Wall mount is not applicable to 15 inch TV
Basic Operating Instructions

Turn on the LCD-TV

STANDBY P.STD 10+ SCAN SWAP CALL MUTE
When the POWER(STANDBY) button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER(STANDBY) button, the LCD-TVwill go into standby mode and the indicator light turns red. You can also turn on the TV from standby mode by pressing the digits(1-9) or P+/-.

PROGRAM EPG

OK ANGLE FAV A-B SLOW TITLE/PBC SEARCH i D.CALL REPEAT
The display will appear on the screen when the TV is turned on the first time: (Different displays for different countries, please see the real set)

AUTO SEARCH UNITED KINGDOM NO YES AUTO SEARCH

OTHER YES

Press V+/- to adjust among countries list on the screen just according to the country you are in, P+/ - to select the option and MENU to confirm.

Audio Control

1.Press the V+ button to increase the volume. 2.Press the V- button to decrease the volume.
1.Press the MUTE button to mute the sound temporarily. A mute icon appears on the screen. 2.Press the MUTE button again or V+ to restore the sound. The mute icon disappears.

Select the TV Channel

You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1. if you want to choose any channel from 0 to 9, please press the -/-- button until - is indicated on the screen and then press the relevant key on the remote control. for example: if you want to choose channel 8, just press the Key number 8. 2.If you want to choose a channel bigger than 9, please press the -/-- button until -- is indicated on the screen. Enter the two digits of the channel number you want to watch. for example: select channel 16 Note: if you want to choose one digit channel in this condition, you should press 0 first and then one digit number key.

Picture Mode

Press P.STD button on the remote control for menu display. For desired mode as follows: PERSONAL STANDARD MILD FRESH

Program Swap

1 Suppose the channel number you used is now channel 8 and the channel number you are using is 18 (as shown in the figure). 2 If you want to return to the last watched program channel 8, you can simply press the SWAP(Q.VIEW) button. 3 If you want to return to channel 18, press the button again. Through this function, you can easily change between the channel you are using and the channel you used last time.

Menu Operations

1. Press MENU button to display the main menu, and V+/V- to select the main menu. 2. Press P+/P- to scroll through the options 3. Press V+/V- buttons to make changes to the parameters 4. Press the EXIT button to exit the menu

Picture Menu Options

Picture quality can be adjusted for any input separately. The picture quality on the screen can be adjusted as follows: 1. Press MENU button and V+/V- until the following menu appears on the screen. 2. Press P+/P- button to enter the picture menu and to go up and down to select the desired option. PC MENU

PICTURE

BRIGHTNESS CONTRAST SHARPNESS COLOUR TEMP.

HDMI /COMPONENT MENU

PICTURE 2 COLD
BRIGHTNESS CONTRAST SHARPNESS COLOUR H.POSITION V.POSITION
TV/S-VIDEO/DVD/SCART/DTV MENU
PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOUR NOISE REDUCTION OFF
Picture Menu Options Continued
3.Press V+/V- button to increase and decrease the level to match your preference. 4. Repeat step 2 and step 3 until desired picture quality has been achieved. Functions: BRIGHTNESS :Adjust the brightness of the picture. By increasing the level, it will add more light to dark parts of the picture and by decreasing the level ,it will add more dark to light parts of the picture. CONTRAST : The image becomes higher as the number increase. SHARPNESS : By increasing the level, it will show cleaner and clearer images and by decreasing the level, it will make picture smoother. COLOUR : Press V+/V- to adjust the colour NOISE REDUCTION: Adjust the quality of the picture by selecting OFF,LOW, MID,HIGH. COLOUR TEMP. : Press to select the colour temperature from WARM/NORMAL/ COLD H.POSITION : Picture horizontal adjust V.POSITION : Picture vertical position adjust.

PASSWORD: ----

If password is correctly entered, the Lock set menu will be entered. If the password is not correctly entered, you will be required to reenter the password and the cursor will stay at the first place. Lock set menu is as follows: (The initial password is 0000. If CLEAR LOCK is activated, the password comes back to initialization and each lock is canceled)
Function Menu Options Continued
LOCK SET PASSWORD TUNER LOCK PROG. SET PROG. NUM SOURCE LOCK CHILD LOCK MAX VOLUME VOL. SET INITIAL VOLUME CLEAR LOCK

OFF TV 4 OFF 50 OFF 50

PASSWORD: The password can be changed. Press P+/- to select PASSWORD and V+ to enter. The screen will display NEW PW: ----, then enter the new password and the screen display CONFIRM PW: ----, if the same password is entered correctly twice, the password will be changed. TUNER LOCK: Press P+/- to select Tuner Lock and V+/- to set ON/OFF.(To set ON, some operation such as search will be not available. When enter the TUNING menu, TUNER LOCK will be on the screen. If you want to operate TUNING menu again, you need to enter the menu to set TUNER LOCK OFF or operate CLEAR LOCK. PROG.SET:Opted for setting up start condition. Press P+/- button to select it. Press V+/- button, sources can be swapped in HDMI/DVD/COMPONENT/PC/ S-VIDEO/SCART/TV/DTV/OFFmode. After setup, the set mode will be entered if the television is switched off and on again. To set Off, the television will memory the off-mode. PROG.NUM: Opted for setting up preset channel. Press P+/- button to select it. Press V+/- button, to select channel number.(The item is not available except TV signal.) CHILD LOCK: Press P+/- button to select it. Press V+/- button to set on or off mode. If lock on mode is set, child lock is activated. In such case, if buttons on the television is pressed, the screen will display CHILD LOCK. The child lock mode can be canceled by entering lock set menu, set child lock off or activate clear lock. SOURCE LOCK: Opted to hinder external input modes, such as PC. Press P+/button to select the option, and press V+ button to display the menu as follows:
SOURCE LOCK OFF PC OFF S-VIDEO SCART COMPONENT TV HDMI DTV OFF OFF OFF OFF OFF
Press P+/- button to select desired option. Press V+/- button to set up the mode. If some source is set on, The screen will display blue background with the mute mode and Lock icon when you enter the source. In lock on mode, when screen is blank, SOURCE LOCK will be always displayed on the screen. If you want to cancel the lock of some source mode, enter SOURCE LOCK submenu and set the mode off, or activate CLEAR LOCK. MAX VOLUME:Press P+/- button to select it. Press V+/- button for adjustment between 0 100. If a certain value is set, when volume is being adjusted, the sound value can not exceed that maximum volume value. VOL SET: Press V+/- to select ON or OFF. INITIAL VOLUME(only works when VOL SET is set ON): Used to memory the volume you have set when you turn on your TV after turn off it. (Eg., When INITIAL VOLUME is set to 50, you can still adjust the volume above or below 50 by V+/-. If the TV is turned on the second time, the volume will resume 50) CLEAR LOCK: Press P+/- button to select it. Press V+/- button to unlock all set modes, setting all lock options to off, and the maximum volume returns to 100.

Adjust Menu Options

1. Press MENU and V+/V- button until the following menu appears on the screen

ADJUST

AUTO SYNC PHASE CLOCK H. POSITION V. POSITION
Note: This menu only appears in PC mode. 2. Press P+/P- button to enter the adjust menu and to go up and down to select the desired option 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference. 4. Repeat step 2 and step 3 until desired quality has been achieved. Functions: AUTO SYNC : Is opted for adjustment of picture location frequency and phase parameters.
PHASE : Removes any horizontal distortion and clears or sharpness the displayed characters. CLOCK : Adjust the TFT-LCD to match the PC input source H.POSITION : Picture horizontal adjust V.POSITION : Picture vertical position adjust.

Tuning Menu Options

TUNING TUNING PROGRAM COUNTRY UNITED KINGDOM AUTO SEARCH Only for some countries
Note: This menu only appears in TV mode. 2. Press P+/P- button to enter the tuning menu and to go up and down to select the desired option. 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference. 4. Repeat step 2 and step 3 until desired quality has been achieved. Functions: 1.TUNING PROGRAM: Press V+ to enter it and the TUNING PROGRAM menu appears:
TUNING PROGRAM CHANNEL 1 EDIT NAME COLOUR SYSTEM AUTO SOUND SYSTEM DK SKIP OFF AFC ON FINE TUNE EXCHANGE MANUAL SEARCH

143.65MHZ

CHANNEL : Press V+/V- to change the TV channel. EDIT NAME: Press V+ to enter it , then press V+/- to select the position you want to edit and press P+/- to input the emblem such as character and so on.(There are 8 position for you to edit totally) COLOUR SYSTEM : Select the TV colour system from AUTO,PAL,SECAM.
Tuning Menu Options Continued
SOUND SYSTEM : Select the TV standard system from DK,I,L/L',BG. (L' may be not available in some countries) SKIP : If you want to skip a channel , press V+/V- to select ON , and this channel will be skip next time when you press P+/P-. But you can press digits button to select the channel. If you want to restore the channel , select OFF. AFC : Auto frequence control. Select ON to improve the image quality. FINE TUNE :Press P+/P- to select FINE TUNE item in menu. Then , press V+/Vbutton to adjust and improve the image quality. EXCHANGE : Press V+ to display the menu as follows:

Programme Timers No. Channel Name Start Duration Date

Modify

When setting a timer the pin code must be supplied to a parental controlled service. So that the timer can override any parental control when is triggers. A timer could be triggered in standby or viewing mode. the receiver is locked during a timer is running. You can unlock the receiver by pressing the TIMER button then the EXIT button, then the timer is cancelled. When a timer is triggered whilst in standby mode the service for which the timer was set will be selected. At the end of the timer the receiver will return to standby mode. Add Timer Add timer function allows you to create a new timer. 1) Press the / button to highlight Add and press OK to enter the Add New Timer screen when you are in the programme Timer screen. You could also enter this screen by pressing the TIMER button during viewing. 2) Set the following items for the new timer: - Channel Number: Select the channel by press the / button. - Repeat: Periodicity of the timer. You can select from the list of once, daily and weekly(from Monday to Sunday) by pressing the / button. - Date(dd/mm/yyyy)(only available when Repeat is set Once) : The day, month and year. Press / button to select the position and digits button to set. - Start Time(hh:mm): Begin time of the service to record with the format hh:mm. - Duration: Total time to record with the format hh:mm. 3) Press OK to save this timer and EXIT to give up this timer. Modify timer This function allows you to modify the programmed timers from the timers list. 1) Press / button to select Modify in the Programmes Timers screen. 2) Press / button to select th timer you want to modify and OK button to enter the Modify Timer screen. All items of this timers are displayed. 3) Modify the items with the way described in Add Timer. 4) Press OK button to save the changes and return to Programme Timer screen. 5) Press EXIT button to give up the changes and return to Programme Timer screen. Delete Timer You can delete the programmed timers from the timers list. 1) Press / button to select Delete in the Programme Timers screen. 2) Press / button to select the timer you want to delete and press OK to delete. A pop-up confirmation window is displayed if you select Yes and press OK button. The selected timer will be deleted. Info Panel Timeout This sub-menu allows you to set the display duration of the info panel. You can select from the list of 3,4,5,6,7,8,9,10,11 seconds by pressing / button.

Settings

The Settings menu includes several sub menus: Configuration, Parental Control, Time Settings, Upgrade and System Information.
Settings Configuration Parental Control Time Settings System Information
Configuration In the configuration menu you may select the Menu/Subtitle/Audio Language. Set the TV Type and enable/disable the subtitle display. 1) Menu Language: the language used in the menu. It could be selected from the pre-defined list by the / button. 2)Audio Language: the default audio language for all services selected from the pre-defined list by pressing / button. 3)Subtitle Language: the default subtitle language for all services selected from the pre-defined list by pressing / button. 4) TV Type: Allows you to set as 4:3 or 16:9 according to the received data by pressing / button. 5) Subtitle: Allows you to set as ON or OFF by pressing the / button. Normally, when it is set to On, the subtitle will be displayed during viewing. 6) Press OK button to save all settings. Parental Control The parental control allows you to enable/disable the menu lock,The channel lock, the maturity level and change the current lock key/password(the default is0000) to any new lock button for security purposes. 1) Enter the parental control menu by navigating main menu -settings-parental control. 2) Setting the following items:

Note: The teletext buttons could be working even if there is no teletext signal, but there is no teletext display.
Teletext Teletext functions
To select Teletext press the TEXT button on the handset. To switch off Teletext, press the button again. Note all menu functions are not available in Teletext mode. Only a few direct button control functions are available in TELETEXT mode, they are: Volume adjustment Mute function

P+ VMENU

Page up/down Use the P+/- buttons to browse next or previous page.
Page number entering To select a Teletext page, enter the page number using the numeric key pad on the remote control, or use the P+ or P- buttons, or the coloured Fast text buttons.
Mix mode To view the TV picture while in Text mode press the button, this will superimpose the Teletext data on top of the TV picture. Press this button again to return to Full text.
Press the tune button to go to the index page of teletext.

Teletext

Language change Pressing the button will change the Teletext characters between Eastern and Western. Hold Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number. Size Pressing the button changes between full screen top half bottom half full screen. This feature is very useful as it magnifies the image making the characters easier to read. Reveal Pressing the button will reveal hidden text. This feature is used to reveal information such as answers to Teletext on-line interactive puzzles. Time While in normal TV mode only, pressing the button will display the teletext time in the top right hand corner for a few seconds. Fast text coloured buttons Fast text automatically displays the four most commonly used pages that the broadcaster thinks that you may want to choose next. Press the same coloured button on the remote control as the coloured link at the bottom of the teletext page to go directly to that page. Subcode

Pressing the

button by entering its 4-digit number to

enter a secondary page;

Basic Playback Basic Playback

Preparations

Press the DTV/DVD button on the remote control to enter the DVD status. Note: The unit do not allow enter DVD mode(or place a DVD in the disc slot) again after it have just left to avoid any damage of the DVD. Wait for 10 seconds to enter again.
When pressing the D.CALL button repeatedly different OSD indicator will be displayed for different types of disc DVD, CD etc

Stop playback

1. Press STOP button to go to stop mode, the TV screen will show the start-up logo. For some disc the player can recall the location where stopped, such as DVDs and audio CDs. 2. Press ENTER/PLAY to resume playback from the location where playback is stopped. 3. Press STOP twice to stop completely.

SEARCH REPEAT

Press REPEAT button multiple times to reach desired play mode: DVD Chapter repeat, Title repeat, All repeat CD Single-play current track, Repeat One-repeat current track, Repeat Folder-repeat current folder, Folder-play current folder.
Press "SEARCH" once to display the search menu. Use the up/down navigation buttons to select the item you require. Press PLAY/ENTER to confirm (CD press the search button several times to select the item). And then press the numeric buttons or navigation buttons to input the item you require. Press PLAY/ENTER to confirm.

SLOW PLAY

Press SLOW to play a disc in slow forward. Each time the SLOW button is pressed, the slow motion speed changes. Press PLAY /ENTER to resume normal playback. Note: This function is invalid for CD.

REPEAT A-B

Press A-B to mark the start-point, press again to set an end point to complete setting. The selected section A-B will be repeated immediately. Press the Repeat A-B again to cancel this function.
Press this key can change the audio mode. such as: Audio 1/2: AC CH English Audio 2/2: AC 3 5.1 CH English If you play CD disc, press this button can cycle among Mono Left, Mono Right, Mix-Mono and Stereo.
When enjoying sports, concert or theatre, press this key to watch same actions in different angles. (Valid for discs possessing this function. Using a disc recorded in multi-angle you can view the scene from different angles, for example, front, side, whole view and exterior scene.)
Note: When press this button continuously, you must above 3 seconds interval.
Press this key to display root menu, select item according to your preference. (This function will work with a DVD having a multi-layer menu.).

TITLE/PBC

With some DVD discs pressing this key will display the title menu. You can then use the digit buttons to select the item you prefer.
Special Function Playback JPEG DISC PLAYBACK
Insert a picture CD or JPEG picture CD into the tray and the disc will be loaded automatically. If the disc type can be identified, the player will start showing the pictures one by one (slide show mode).If a navigation menu will be displayed use the navigation buttons to select a file, then press the PLAY/ENTER button. Each picture in the CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen. Some slide show transition modes are provided, use "PROGRAM" key to select. Customer can set transition effects for each picture. To display an image indefinitely, press the "PAUSE" key. To view the next or previous picture, press "NEXT" or "PREV" key. To resume the slide show, press the " PLAY/ENTER" key. Press the STOP button to preview the photos in a folder. Press navigation buttons to rotate a picture.

SCREEN SAVER FUNCTION

If this unit is idle for 3 minutes, it will go to sleep mode with screen saver on. In this mode, you can press any key on remote control or on front panel to activate the unit. You can set SCREEN SAVER function to OFF in GENERAL SETUP PAGE of DVD SYSTEM SETUP.

DVD System Setup

DVD System Setup General Setup Process
1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn. 2.Press CH+/- b or item, then press submenu. to select, the to enter the

.General Setup Page.

. Tv Display 4:3 LB 4 3/Ps. Angle Mark On 4 3/Lb Osd Lang ENG Caption On Screen Saver Off
or 3.Press CH+/- bu to select then press PLAY/ENTER to confirm.
4.Press SETUP repeatedly to exit the set-up menus.

.Preference Page.

TV Type Parental Password Default

PAL AUTO NTSC

General Setup Page

ASPECT RATIO DESCRIPTION

When using the DVD with the internal TV, select 4 3/LB.
The following information applies only when the DVD output is connected to an external TV.
. Tv Display 4:3 LB 4 3/Ps. Angle Mark On 4 3/Lb Osd Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On
4 3/PS (PS = Pan and Scan) You may select this if you have a normal aspect ratio (4:3) TV, although the NORMAL /LB (letter box) is a more common choice. In PS mode, widescreen material will fill the screen, but at the expense of chopping off extreme left and right edges of the original film picture. For this feature to work, the disc must be specially coded. Such discs are uncommon. 4 3/LB (LB = Letter Box) You may select this if you have a normal aspect ratio (4:3) TV. Widescreen material will be shown in pure unaltered form, allowing the entire picture area of the original film to be viewed without any side cropping. Black bars will appear above and below the picture. You may select this if you have a widescreen (16:9) TV. Back bars may still appear above and below the picture even if using a widescreen TV. This is because some film directors prefer to use ultra widescreen aspect ratios e.g. 2.35:1. This will normally be indicated on the DVD packaging.
DVD System Setup(Continued)
DVD System Setup General Setup Page Angle Mark: Users can select a particular camera angle.when playing a DVD which offers multiple angles.
This item allows you to set Angle Mark ON or OFF.
Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On

On Off

On Screen Display (OSD) Language: Users can select on-screen display language.
Tv Display 4:3 LB Angle Mark On OsdLang ENG Caption On Screen Saver Off Hdcd Off Last Memory On
English French German Spanish Italian
(The languages you can select may differ from different countries or models)
.General Setup Page. Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On
Caption: This function allows you to display or hide the caption.
.General Setup Page. Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption.General SetupOn Page. Screen Saver Off On Hdcd Off Off Last Memory On
Screen Saver: If the screen saver is on,then there will be an animated picture of DVD on the screen whenever the DVD player is idle for more than 3 minutes.
.General Setup Page. Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption.General SetupOn Page. Screen Saver Off Hdcd Off Off Last Memory On 1X 2X.General Setup Page.
Hdcd: When default setting is off, it will display CD by reading HDCD, for HDCD playback, please choose 1X or 2X.
Last Memory: Memorize the chapter you have just watched. When last memory is on, if you turn on the DVD again after off it will display from the chapter you watched when you turn off the DVD.
Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption.General SetupOn Page. Screen Saver Off Hdcd Off Last Memory On On Off
DVD System Setup Preference Page
The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played.
TV Type: This player supports different TV output, including MULTI(Auto), NTSC, and PAL systems. Usually please set to MULTI. Parental: The parental control function works in conjunction with the different censorship classes assigned to DVDs. These classes help to control the types of DVDs that the family watches, There are up to 8 censorship classes for DVDs. Note:
2G 3 Pg 4 Pg Pgr 6R 7 NcAdult Off
1 To change this setting you must enter your password. (Initial password is 1234) 2 When set to OFF, all discs may be viewed.

Password change:

You can change your password by entering 4 digits. Your must confirm the 4 digits before the new password can be accepted.

Auto Change

Old Password New Password Confirm Pwd
NOTE:If you forget your password or a password is accidentally set enter 1369 as the password. This will enable you to regain control.
Default: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset.
Some functions may not be available depending on the type of disc.

Playable Discs

The following discs can be played:
Support discs: DVD, CD-R, CD-RW, HDCD, JPEG, CD+G, Kodak CD , W MA.
You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labeled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases, their performance may not be very well or even not playable.
Dics Protection and DVD Characteristics
Compare DVD disc with other discs:
Encode method Digital/MPEG

Analog

Capacity
Singleside singlelayer 4.7G
Double -side single -layer 8.5G
Singleside doublelayer 9.4G
Doubleside doublelayer 17G Single-side 60 minutes double-side 120 minutes 30cm/20cm
266 Playing Time minutes minutes minutes

484 minutes

Disc diameter
Horizontal resolution Picture proportion Subtitle

More than 500 line

No more than 430 line
Multiple kinds 32 kinds 48KHz, 96KHz/ 6, 20, 24bit
One kind 16 kinds at most 44.1KHz/ 16bit

Sound quality

Troubleshooting Guide
To assist in location possible faults use help guide below.

Troubleshooting

Verify if the television is properly plugged in. Verify if the television has a proper supplied power source. Verify if electricity is available. Verify if correct signals are input. Press TV/AV button to change signal input to TV input. Restart the television if power supply is interrupted. Press MUTE button and verify if Mute mode is set. Switch to other channel and verify if the same problem happens. Press VOL+ button to see if the problem can be solved. Verify if sound system is correct. Refer to user's manual for adjustment. Verify if correct channel is selected. Adjust the antenna. Make adjustments by FINE TUNE and MANUAL SEARCH. Verify if the same problem exists in other channels. adjustment. Verify if the antenna is correctly connected. Verify if the antenna is in good condition. Make fine adjustment of channel. Disconnect the television from power supply and 10 seconds later, connect the television to the power supply. If the problem still exists, contact authorized after-sales service for technical assistance.

No picture, no sound

Blank screen

No sound

Poor sound
No picture in some channel
No color for some channel Check out of picture and sound systems. program (black and white) Refer to relative instructions in the Manual for color
Spots with some or all pictures
Television out of control
Note: 1.If the fault can not be repaired using the above guide consult with your local authorized service center. 2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.

Specifications

Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations.
Model Picture, sound system Audio output External input port Power requirements Power consumption Temperature
L15T11W-A,L15TA11W, L15T11W-C, L15TC11W, L15T12W-A,L15TA12W, L15T12W-C, L15TC12W, LT15T1W ,LT15T1BW, LT15T1WW
L19T11W-A, L19TA11W, L19T11W-C, L19TC11W, L19T12W-A, L19TA12W, L19T12W-C, L19TC12W , LT19T1W,LT19T1BW, LT19T1WW
L22T11W-A, L22TA11W, L22T11W-C, L22TC11W, L22T12W-A, L22TA12W, L22T12W-C, L22TC12W, LT22T1W,LT22T1BW, LT22T1WW

PAL/SECAM-B/G,I,D/K,L,L

1.5W+1.5W
COMPONENT input PC input S-VIDEO input Audio input SCART Antenna input HDMI input ~150-240V 50/60Hz 50W 60W 70W
Working:5 C~35 C Storage:-15 C~45 C Working:20%~80% Storage:5%~90%
Remote control Batteries Owner's manual Audio cable

Humidity

Accessories
Note: All specifications are subject to change without notice. All quality are approximate value.