My dad @DJLouie Atlanta going over the upgrades I've done to my 2015 Harley Davidson Street Bob FXDB. 03:45 - How it ...
This is the brand new 2016 Harley Davidson Dyna Street Bob. I perform an indepth walk around, and explain the key features and ...
POV Test ride and review of the 2016 Harley Davidson Dyna Street Bob FXDB motorcycle. I ride the bike through the city and give ...
INSTALLATION INSTRUCTIONS: HARLEY-DAVIDSON, DYNA, STREET BOB EC TWIN SLASH SLIP-ONS PART# 16786/46786
Congratulations, you have purchased the finest exhaust product for your motorcycle. This Vance & Hines exhaust product is type-approved for highway use in the European Union when installed on Harley-Davidson models. Please follow the installation instructions below and if you have any questions, please call our technical support line at (562) 926-5291. Attention installer (if other than owner), please forward this instruction sheet to the owner of this product. These instructions contain valuable information to the end user.
DESCRIPTION REAR CYLINDER MUFFLER BODY FRONT CYLINDER MUFFLER BODY
Page 1 of 4
FLAT BLADE SCREWDRIVER 5/16 NUT DRIVER 1/2" WRENCH
RATCHET: 3/8" DRIVE SOCKETS:9/16",1/2" 9" EXTENSION
STOCK EXHAUST SYSTEM REMOVAL
1. Loosen the heat shield clamps on both front and rear exhaust pipes. 2. Loosen the clamps holding the mufflers ...