Reviews & Opinions
Independent and trusted. Read before buy Harman Kardon PM640!

Harman Kardon PM640

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Harman Kardon PM640, size: 637 KB
Related manuals
Harman Kardon PM640VXI

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Harman Kardon PM640About Harman Kardon PM640
Here you can find all about Harman Kardon PM640 like manual and other informations. For example: review.

Harman Kardon PM640 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Harman Kardon PM640 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Harman Kardon PM640 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 6. Page 1 of 1. Average Rating:
toprobroy 9:07am on Monday, October 25th, 2010 
Forget Bose get this Did loads of research, weeks in fact, went round listening to every ipod dock I could find.
scsgeorgiegirl 7:56am on Saturday, September 11th, 2010 
So more on the sound. Like I said, the origi... Getting a demo of this device is much much better than any review. So more on the sound. Like I said, the original will blow any sound dock at this price out of the water (Bose... NOT EVEN CLOSE).
donjones12 10:18pm on Thursday, May 27th, 2010 
Much better than Bose. I came across these speakers for £329 in John Lewis, which is a massive difference compared to here. Quality Sound, Solid Bass, Highly Recommend I paid £140 for this, which is an absolute bargain. Sounds nice at full volume. Harmon Kardon Go and Play Harman Kardon - Go & Play - High Performance iPod Speaker System This machine has a fantastic sound and huge bass for such a...
Bastian 8:48am on Friday, May 7th, 2010 
If you listen to this Unit with your favorite music at a 200-250 price range there is nothing on the market that I have found that is even close(the t...
shujask 1:26am on Monday, May 3rd, 2010 
No one know how to make a good boombox!! In general, 99% of the iPod docking speakers on the market are junks, be exact are over priced junks. Awesome - outperforms Bose by a long shot When our Bose Sounddock was stolen, I started looking at other options. Best Sounding Portable EVER! I bought this portable over two years ago, and it still draws the praise of everyone that hears it.
BVoris 6:00am on Monday, March 29th, 2010 
Best Ipod Speaker System No One Knows About If I worked on the design team at Harmon Kardon.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Service Rang & Namen

Die groe

Testbersicht

Verstrker
Service: Rang & Namen

Vollverstrker

Name Heft Preis in Punkte Bemerkungen
Abacus Rieder Amp 50 Accuphase E-530 Accuphase E-203 Accuphase E-205 Accuphase E-206 Accuphase E-210 Accuphase E-211 Accuphase E-211 Accuphase E-303 Accuphase E-303 X Accuphase E-305 Accuphase E-306 V Accuphase E-405 Acoustic Research A 03 Acoustic Research A 07 Acoustic Research A 07 Adyton Opera Aiwa AA-8500 E Aiwa XA-006 Akai AM-2400 Akai AM-35 Akai AM-47 Akai AM-52 Akai AM-55 Akai AM-65 Akai AM-67 Akai AM-73 Akai AM-93 Akai AM-95 Akai AM-A 301 Akai AM-U 61 AMC 3050 AMC CVT 3030 A Arcam A 65 Arcam A 85 Arcam Alpha Arcam Alpha 10 Arcam Alpha 3 Arcam Alpha 5 Arcam Alpha 8 Arcam Delta 60 Arcam Delta 90 Arion Tycho ASR Emitter 1 Plus SQ ASR Schfer Emitter II HD Audio Analogue Puccini
04/86 02/03 02/80 04/86 06/89 09/95 04/01 04/01 10/79 08/85 05/88 05/98 02/90 01/94 11/89 12/89 11/93 12/81 05/94 03/79 02/91 02/92 11/87 02/91 11/89 10/92 09/88 03/89 06/90 12/85 12/82 06/96 06/98 05/02 05/02 03/87 08/98 10/92 01/94 03/98 11/89 08/87 01/96 04/01 03/97 12/97

6500 950

21-23 Punkte, frher om37-39 Punkte, frher s1 37-39 Punkte, frher s1 45-47 Punkte, frher as50 43-45 43-45-47 Punkte, frher as3 29-31 Punkte, frher s3 33-35 Punkte, frher s2 33-35 Punkte, frher s2 41-43 Punkte, frher as4 25-27 Punkte, frher s4 29-31 Punkte, frher s3 29-31 Punkte, frher s3 29-31 Punkte, frher s3 29-31 Punkte, frher s3 29-31 Punkte, frher s3 33-35 Punkte, frher s2 29-31 Punkte, frher s3 37-39 Punkte, frher s1 33-35 Punkte, frher s2 9-11 Punkte, frher m2 25-27 Punkte, frher s4 37-39 Punkte, frher s33-35 Punkte, frher s33-35 Punkte, frher s2 29-31 Punkte, frher s33-35 Punkte, frher s2 33-35 Punkte, frher s2 41-43 Punkte, frher as26 21
digital digital FB digital digital digital
Audio Innovations Audio NET SAM Audio Net SAM V 2 Audio Research CA 50 Audioanalyse PA 90 Audium 6L6 Aura VA 40 Avantgarde C 1 AVM A 2 AVM Competition amp AVM Evolution A 1 AVM Inspiration A 6 Ayre AX 7 Ayre AX 7 X Braun A 1 Burmester 909 Burmester 959 Burmester Rondo 991 Burmester Rondo 991 Burmester Twin-Amp 940 Cairn Alegra Cambridge A 1 Mk 3 Cambridge ATAC 3 Cambridge ATAC 3 Advance Edit. Cambridge Audio A 500 Camtech Der Verstrker Camtech V 102 Cayin 220 Cayin 500 Cayin 600 Cayin TA 30 Cayin TA 35 Classe Audio CAP 100 Conrad Johnson CAV 50 Creek 4330 Creek 5250 Creek 5250 SE Creek 5350 Creek 5350 SE Creek A 50i Cybernet CA-50 Cyrus 5 Cyrus 6 Denon AVC-1530 Denon AVC-A 1 SR Denon AVC-A 10 SE Denon AVC-A 11 SR Denon PMA 655 R Denon PMA-1060 Denon PMA-1315 R Denon PMA-1500 R Denon PMA-2000 Denon PMA-250 Denon PMA-250 SE Denon PMA-260 Denon PMA-280 Denon PMA-300 Denon PMA-350 SE Denon PMA-360 Denon PMA-425 R Denon PMA-500 Denon PMA-500 V Denon PMA-520 Denon PMA-525 R
06/91 02/98 01/01 03/97 06/89 11/93 11/89 09/95 07/99 03/97 03/92 10/02 06/02 04/03 02/81 06/91 08/96 11/99 08/02 01/95 05/99 09/98 06/96 09/96 09/03 03/98 11/95 12/01 02/00 03/01 11/01 05/02 09/97 10/98 05/99 01/98 03/98 06/01 05/02 09/03 03/79 03/00 10/03 12/94 07/02 08/00 01/02 05/00 09/91 10/94 05/98 07/96 03/87 11/97 03/90 05/94 11/86 05/97 02/91 03/97 04/81 03/87 08/88 12/95

300 250

33-35 Punkte, frher s37-39 Punkte, frher s1 41-43 Punkte, frher as4 29-31 Punkte, frher s3 45-47 Punkte, frher as22 41-43 Punkte, frher as53-55 Punkte, frher as1 45-47 Punkte, frher as47 49-51 Punkte, frher as28 33-35 Punkte, frher s2 33-35 Punkte, frher s42 37-39 Punkte, frher s25-27 Punkte, frher s4 51/43 45/38 49/33-35 Punkte, frher s2 33-35 Punkte, frher s41-43 Punkte, frher as4 25-27 Punkte, frher s29-31 Punkte, frher s3 29-31 Punkte, frher s29-31 Punkte, frher s25-27 Punkte, frher s4 25-27 Punkte, frher s4 25-27 Punkte, frher s4 29-31 Punkte, frher s3
Digital-Vollverstrker ohne Phono m. D/A-Wandler

Phono MM+ 46 FB

Rhre Rhre; ohne Phono
FB, Surround Surround-Vollverstrker AC-3, DTS, 6.1 Surround-Vollverstrker FB FB FB FB
Vollverstrker Vorverstrker Endverstrker Receiver

Seite 7 9

www.stereoplay.de

1 stereoplay 2004

Denon PMA-700 V Denon PMA-707 Denon PMA-715 R Denon PMA-725 R Denon PMA-737 Denon PMA-750 Denon PMA-770 Denon PMA-860 Denon PMA-880 R Denon PMA-900 Denon PMA-920 Denon PMA-925 R Denon PMA-950 Denon PMA-960 Denon PMA-S 1 Denon PMA-S 10 II deVa 600 Diora (Conrad) WS 504 Dual CV 1230 Dual CV 1260 Dual CV 1280 Dual CV 1280 Dual CV 1450 Dual CV 440 Dual CV 5600 Dual CV 5670 Dual CV 6060 Dual PA 5060 Electrocompaniet ECI 1 Electrocompaniet ECI 1 Electrocompaniet ECI 1 Electrocompaniet ECI 2 Electrocompaniet ECI 3 Electrocompaniet ECI 4 Electrocompaniet ECI 4 Eton 120 VV Euphya Alliance 250 Exposure 15 Exposure 2010 Fidelity Garant Fisher CA-2030 Fisher CA-276 Fisher CA-350 Fisher CA-67 Fisher CA-863 Fisher CA-866 Fisher CA-866 Graaf Venticinque Grant G 60 S Grundig Fine Arts A 9000 Grundig Fine Arts A 903 Grundig Fine Arts A 909 Grundig Fine Arts V 3 Grundig Fine Arts V1 Grundig SV 2000 Grundig V 30 Grundig V 35 Grundig V 7200 Grundig V 7500 Grundig V 8200 Grundig V 8200 Mk II Grundig V 8300 Mk II Harman/Kardon HK 505 Harman/Kardon HK 610 Harman/Kardon HK 6100 Harman/Kardon HK 6150 Harman/Kardon HK 620 Harman/Kardon HK 630 Harman/Kardon HK 640 Harman/Kardon HK 650 Harman/Kardon HK 6500 Harman/Kardon HK 6550 Harman/Kardon HK 670 Harman/Kardon HK 680 Harman/Kardon HK 6800 Harman/Kardon PM 625 Harman/Kardon PM 635 Harman/Kardon PM 640 Harman/Kardon PM 640 VXI Harman/Kardon PM 650 Harman/Kardon PM 655 Harman/Kardon PM 655 VXI Harman/Kardon PM 665 VXI Hitachi HA-007 Hitachi HA-2 Hitachi HA-270 Hitachi HA-3 Hitachi HA-6 10/86 12/85 12/95 06/96 10/84 04/82 10/83 02/91 05/93 10/87 09/88 10/96 10/82 08/85 08/94 07/97 01/97 05/94 03/87 10/84 06/86 11/86 02/81 04/86 03/90 02/91 03/90 08/88 11/93 03/94 06/97 09/95 06/00 04/01 04/02 01/95 10/02 06/91 06/01 10/86 09/80 05/85 04/82 08/84 06/86 11/86 03/87 06/00 08/85 09/87 11/87 03/92 10/93 05/94 12/82 12/84 12/85 10/84 05/85 03/87 09/89 07/89 01/80 02/95 09/89 05/93 12/95 05/00 12/95 05/99 11/89 10/92 12/01 03/95 06/90 06/86 12/86 10/84 08/88 04/82 05/85 09/88 10/87 09/88 10/84 03/79 06/86 10/450 33-35 Punkte, frher s2 21-23 Punkte, frher om1 29-31 Punkte, frher s3 33-35 Punkte, frher s2 15-17 Punkte, frher m1 17-19 Punkte, frher om 33-35 Punkte, frher s2 29-31 Punkte, frher s3 29-31 Punkte, frher s3 33-35 Punkte, frher s2 33-35 Punkte, frher s2 33-35 Punkte, frher s2 37-39 Punkte, frher s1 37-39 Punkte, frher s1 45-47 Punkte, frher as18 25-27 Punkte, frher s4 21-23 Punkte, frher om1 15-17 Punkte, frher m1 21-23 Punkte, frher om1 Hitachi HA-7700 Jadis Orchestra JJ Electronic 828 JVC A-K 200 JVC A-K 300 B JVC AX-411 JVC AX-5 JVC AX-500 VB JVC AX-55 JVC AX-611 JVC AX-77 JVC AX-A 572 JVC AX-Z 1010 JVC JA-S 22 Kenwood DA-9010 Kenwood KA-2050 L Kenwood KA-3010 Kenwood KA-3050 R Kenwood KA-400 Kenwood KA-4010 Kenwood KA-4020 Kenwood KA-4040 R Kenwood KA-405 Kenwood KA-4050 R Kenwood KA-5010 Kenwood KA-5020 Kenwood KA-5040 R Kenwood KA-5090 R Kenwood KA-550 Kenwood KA-550 D Kenwood KA-5700 Kenwood KA-660 D Kenwood KA-660 D Kenwood KA-7010 Kenwood KA-7020 Kenwood KA-7090 R Kenwood KA-74 Kenwood KA-747 Kenwood KA-770 D Kenwood KA-801 Kenwood KA-9 X Kenwood KA-900 Kenwood KA-990 Kenwood KA-990 SD Kenwood KA-990 V Kenwood KAF-3010 R Kenwood KAF-3030 R Kenwood KA-V 8500 Kenwood L-01 A Kenwood L-02 A Kora Explorer 90 SL Lindemann Amp 1.0 Lindemann Amp 3 Lindemann Amp 3 Mk II Lindemann Amp 4 Linn Intek Linn Klimax Kontrol Loewe SX-6396 Lua 4040 C Lua 6060 C Lua Sonata Lundahl Magnetic Amplifier Luxman A-371 Luxman A-384 Luxman L-190 Luxman L-3 Luxman L-405 Luxman L-410 Luxman L-435 Luxman L-503 s Luxman L-505s Luxman L-510 Luxman L-525 Luxman L-530 Luxman L-540 Luxman L-560 Luxman LV-105 Luxman LV-110 Luxman LV-112 Luxman LV-113 Luxman LV-117 Marantz 1050 Marantz 1072 Marantz PM 14 Mk II KI Marantz PM 15 Marantz PM 16 Marantz PM 17 Marantz PM 17 KI 04/81 02/98 10/02 12/84 08/84 09/89 04/81 05/85 10/83 11/89 10/82 01/94 06/90 03/79 06/90 09/93 03/90 05/93 09/80 10/89 02/91 02/92 07/80 01/94 07/89 02/91 02/92 05/97 03/87 11/88 03/79 10/85 06/88 01/89 09/91 01/97 12/85 06/86 11/87 02/80 12/82 04/81 10/83 05/85 10/86 09/98 05/00 11/94 09/80 09/82 03/01 11/93 01/96 07/97 04/01 06/91 11/02 02/81 02/00 10/00 06/02 09/99 09/91 11/95 10/84 10/79 10/86 10/83 08/86 02/98 06/97 10/82 04/86 08/85 02/90 05/88 06/85 08/88 06/88 09/88 10/87 03/79 12/78 04/01 08/94 06/97 09/97 08/1750 21-23 Punkte, frher om51 9-11 Punkte, frher m2 17-19 Punkte, frher om 25-27 Punkte, frher s4 21-23 Punkte, frher om1 25-27 Punkte, frher s4 33-35 Punkte, frher s2 29-31 Punkte, frher s3 33-35 Punkte, frher s2 29-31 Punkte, frher s3 37-39 Punkte, frher s1 33-35 Punkte, frher s2 25-27 Punkte, frher s4 25-27 Punkte, frher s4 29-31 Punkte, frher s3 25-27 Punkte, frher s4 21-23 Punkte, frher om1 25-27 Punkte, frher s4 29-31 Punkte, frher s3 29-31 Punkte, frher s3 29-31 Punkte, frher s3 33-35 Punkte, frher s17-19 Punkte, frher om2 25-27 Punkte, frher s4 29-31 Punkte, frher s3 25-27 Punkte, frher s4 29-31 Punkte, frher s3 33-35 Punkte, frher s9-11 Punkte, frher m2 25-27 Punkte, frher s4 29-31 Punkte, frher s3 25-27 Punkte, frher s4 29-31 Punkte, frher s3 33-35 Punkte, frher s2 33-35 Punkte, frher s2 29-31 Punkte, frher s37 33-35 Punkte, frher s2 29-31 Punkte, frher s3 37-39 Punkte, frher s41-43 Punkte, frher as4 41-43 Punkte, frher as51 29-31 Punkte, frher s33-35 Punkte, frher s2 37-39 Punkte, frher s1 25-27 Punkte, frher s4 29-31 Punkte, frher s3 37-39 Punkte, frher s1 33-35 Punkte, frher s22 37-39 Punkte, frher s1 37-39 Punkte, frher s1 37-39 Punkte, frher s1 45-47 Punkte, frher as3 43-45 33-35 Punkte, frher s2 21-23 Punkte, frher om1 33-35 Punkte, frher s2 29-31 Punkte, frher s3 37-39 Punkte, frher s1

Separater PhonoVorverstrker Phono mit A 2 digital digital

mit Endstufe

Mulitkanal

Surround

Akkugert
63/58 SurroundVorverstrker

5 stereoplay 2004

Mark Levinson No 38 S Mark Levinson No. 28 Mark Levinson No. 380 MBL 4010 MBL 5010 CM MBL 5010 CM MBL Der Vorverstrker McIntosh C 2200 McIntosh C 27 McIntosh C 29 McIntosh C 29 McIntosh C 33 McIntosh C 712 McIntosh MC 7205 McIntsoh C 100 Mclntosh MX132 Meridian 201 Meridian 501 Meridian 562/517/516 Meridian 565 Meridian 568 Meridian MCLP Metaxas Marquis Metaxas Opulence Mission 776 Mission Pre Mitsubishi DA-P 600 Mondial Acurus ACT 3 Monrio Primus Moscode Minuet in A Musical Fidelity Preamp 3 AX Musical Fidelity X P 100 Musical Fidelity X-Pre Musical Technology P 1 Myryad MP 100 NAD 1130 NAD 114 NAD 1155 NAD 118 NAD 1240 NAD 1300 NAD C 160 NAD PP 2 NAD S-100 Nagra PL-P Naim AV 2 Naim NAC 282 + HiCap Naim NAC 500 Naim NAC 552 Nakamichi CA-5 E Nakamichi CA-5 E II Nikko Beta 400 Nikko Beta II Octave HP 200 Octave HP 300 Octave HP 500 Octave HP 500 Octave HP 500 Mk 3 Onkyo P-200 Onkyo P-3030 Onkyo P-3060 Onkyo P-3060 R Onkyo P-3090 Onkyo P-3390 Onkyo P-3890 Parasound P/HP 850 Parasound P/LD 1100 Parasound P/LD 2000 Parasound P/LP 1500 Parasound P/SP 1000 Parasound P/SP 1500 Pass X 2 Pass Xono Perreaux SM 2 Pioneer C-7 Pioneer C-73 Pioneer C-90 Pioneer C-Z 1 Plinius Jarrah Proceed AVP Proceed PAV Proton AP-1000 Proton AP-400 Pro Quad 34 Quad 44 02/95 10/91 07/99 10/83 04/98 06/00 02/88 04/03 09/78 01/80 05/82 08/83 10/97 10/00 06/98 10/00 06/88 07/95 08/97 04/98 03/01 12/85 09/91 02/88 03/83 04/97 05/79 10/99 03/95 08/86 07/88 05/00 07/98 08/01 03/99 04/86 04/97 12/86 04/96 05/89 06/88 05/01 11/03 12/98 02/98 08/02 06/03 10/97 09/02 11/85 10/89 01/89 11/79 09/93 07/01 10/90 03/96 02/00 11/85 11/83 01/82 03/83 11/81 12/86 09/92 06/94 02/95 03/96 03/94 07/95 12/96 11/98 10/01 06/85 07/91 02/91 08/86 09/80 08/01 01/01 09/94 01/89 06/94 01/89 03/k.A. 750 53-55 Punkte, frher as1 43-37-39 Punkte, frher s51 43-Restek V 2a 03/Rotel RC 1070 05/Rotel RC-1000 05/Rotel RC-2000 07/Rotel RC-850 06/Rotel RC-870 BX 05/Rotel RC-970 BX 06/Rotel RC-972 03/Rotel RC-990 BX 09/Rotel RC-995 10/Rotel RHA-10 09/Rotel RSP 1066 08/Rotel RSP-960 12/Rotel TC-980 AX 03/Rowen PR 1 08/Rowland Consonance 10/SAC Epsilon 02/SAC Mediatore 12/SAE 2100 L 06/SAE X 1 P 12/Sherwood AP-7020 09/Sherwood AVP-8500 R 12/Siemens RP 666 03/Sony TA-E 1000 ESD 10/Sony TA-E 2000 ESD 08/Sony TA-E 90 ES 02/Sony TA-E 900 01/Sony TA-E 901 07/Sony TA-E 901 03/Sony TAE-9000 ES 06/Stax CA-Y 05/Sudgen C 28 06/Sumo Athena 06/Sumo Electra 12/T + A P 1220 01/T + A PD 1200 R 01/T + A Pulsar P 1200 R 09/T + A Pulsar P 2000 04/T + A Pulsar P 2000 AC 12/T + A Pulsar P 2000 AC 10/TAG McLaren AV 192 R (PL II, 6.1, U2, Raumkorr.) TAG McLaren AV 32 R-EX TAG McLaren DPA 32 R TAG McLaren PA 20 R TAG McLaren PPA 20 Tandberg 3038 A Tandberg TCA 3002 Tandberg TCA 3002 A Technics SU-A 4 Mk II Technics SU-A 40 Technics SU-A 6 Technics SU-A 60 Technics SU-A 8 Technics SU-C 1000 Technics SU-C 3000 Terratec Phono Preamp Studio Theta Casablanca II Threshold FET One Threshold FET Two Mk II Thule PR 250 Thule spirit Control Toshiba Aurex SY-A 88 Toshiba Aurex SY-A 90 Uher UPA 3000 VT Uher UPA-1000 Vincent LS 1 Vincent SA 11 Vincent SA T 1 VTL Maximal WBE Diamond 36 HE Yamaha C-2a Yamaha C-2x Yamaha C-4 Yamaha C-60 Yamaha C-65 Yamaha C-70 Yamaha CX-50 Yamaha CX-70 Yamaha CX-830 Yves Cochet P Deux 03/01 11/00 10/98 01/02 10/89 01/82 06/84 07/84 10/90 01/82 07/88 12/81 10/95 03/99 06/03 05/01 05/82 03/86 04/00 02/98 09/82 11/83 09/93 09/92 04/96 02/98 07/03 05/90 08/01 09/80 06/85 08/80 09/84 12/86 09/82 10/88 10/89 10/90 08/33-35 Punkte, frher s2 48

doc1

Drive+Play OM revB.qxd

9/14/05

7:20 PM

Page 1

Owners Manual

Page 2

INTRODUCTION
Thank you for purchasing Harman Kardons Drive + Play, an elegant mobile audio solution that provides the driver with total iPod control, including full music browsing capability. Weve organized this manual to make installation and operation as simple and trouble-free as possible. Please read it thoroughly before you begin installing Drive + Play. Remember to keep your sales receipt with this manual in a safe place, so both are available for future reference. If you have any questions about the installation, please contact us at: 1 (516) 255 HKHK (4545) Or on the Web at: www.harmankardon.com

Drive + Play Warnings

Distraction Warning Do not connect or disconnect your iPod or program Drive + Play while driving. Always be careful and attentive to your vehicle and the traffic around you. Always obey all traffic laws while driving. Always pull off the road and park in a position you are sure presents absolutely no risk before browsing your iPod or adjusting the settings on your Drive + Play. Connecting the iPod Always hold the Drive + Plays iPod dock connector by its sides and gently insert (or remove) the dock connector. Never use excessive force to insert or remove the connector, or damage to your iPod may occur. Lost Data Harman/Kardon is not responsible for any lost data on your iPod when using the Drive + Play. Be sure to back up the audio data files on your computer. Loud Music and Hearing Playing loud music in a vehicle can permanently damage your hearing, as well as hinder your ability to hear traffic. The maximum volume levels achievable with this product, combined with high power amplification, may exceed safe levels for extended listening. We recommend using low volume levels when driving. Harman/Kardon accepts no liability for hearing loss, bodily injury, or property damage as a result of use or misuse of this product.

iPod Requirements

Drive + Play is designed to work with all iPods equipped with the following Apple hardware and software: 1. iPod dock port

iPod Dock Port

Headphones and Driving Do not use headphones while operating a vehicle. This practice is illegal in some areas. Always be careful and attentive to your vehicle and the traffic around you. Always obey all traffic laws while driving. Drive + Plays audio output is not suitable for driving headphones and is intended to output a signal appropriate for an audio systems line-level input jack. About Installation Although we recommend professional installation for your Harman/Kardon Drive + Play, this product is designed for do-it-yourself installation as well, especially when using the wireless FM transmission method (see page 4). Although the enclosed instructions explain how to install the Drive + Play in a general sense, they do not show the exact methods for your particular vehicle. After reading the manual, if you feel uncomfortable in performing the necessary steps to install the product, consider asking your car-audio dealer about professional installation options.

2. iPod software

Model Description and Minimum Software Version/Date
3G Buttons above touch wheel v2.2 2/04 Mini All v1.1 3/04 4G Click Wheel v3.0 7/04 Photo Color Screen v1.0 10/04 5G Color Screen v1.0 6/05 Nano Color Screen v1.0 9/05
As long as both of these requirements are met, Drive + Play can be easily added to virtually any mobile audio system for total control of your iPod.

2 INTRODUCTION

Page 3

INSTALLATION

Parts List
Drive + Play includes the following components and parts: Text Display With Universal Mounting Base and Attached Cable (3m) Control Knob With 30 Mounting Base and Attached Cable (3m) Electronics Enclosure (the Brain) 12-Volt Accessory Power Cable (2m) With Cigarette Lighter Adaptor 12-Volt Power Harness (0.5m) With In-Line Fuse Holder (for direct connection to the vehicles electrical system) Line Out Cable (1.6m): Stereo 3.5mm (M) Plug to L/R RCA (M) Plugs iPod Cable (3m): 8-Pin Mini DIN (M) Plug to iPod Dock Connector (2) Control Knob Bases: 0 and 60 (2) Mounting Plates for Knob Base and Display Base (10) Mounting Screws: (3) Knob Base, (3) Display Base and (4) Electronics Enclosure (6) Cable Ties, Black (2) Hex Keys: 3mm and 1.5mm (2) Adhesive Mounting Pads (2) Alcohol Prep Pads Warranty Card Drive + Play Components Drive + Play consists of three main components: Text Display, Control Knob and Electronics Enclosure. They operate together as a system to make controlling your iPod easy, and to route the audio signal to your mobile audio system. All three components must be installed. You can choose wireless FM transmission, wired FM transmission (adaptor sold separately), or direct connection of the line-output audio signal for the audio interface. Text Display Location The Text Display shows current iPod information and is similar to the display on your iPod. It comes with a three-position pivot arm for virtually limitless viewing adjustment. You can install the unit in a variety of locations, as long as the proposed site offers a direct view of the display. For easiest viewing, mount the unit near other instrument-panel gauges or on top of the dashboard. Control Knob Location The Control Knob allows you to control the iPod much like the iPod Click Wheel. The unit comes with three interchangeable bases so you can choose the most comfortable operation angle. Ideally, you should install the Control Knob in a location that provides comfortable access while driving where you can easily feel and operate it without taking your eyes off the road.

(under seat)

Choosing Installation Locations
IMPORTANT: Drive + Play should be installed according to these instructions and relevant regulations. No part of this system should obstruct the drivers view of the road or vehicle controls or information displays necessary for safely operating the vehicle. The text display should be positioned to eliminate glare and reflections, and should be as close as possible to the drivers normal line of sight.

Install Text Display

(on dash) (on windshield glass) (on gauges panel) (on dash)

(behind radio)

Install Electronics Enclosure

(in glove box)

(on console)

Install Control Knob

Tools and Precautions
To install Drive + Play components, we recommend using the following tools: Electric or cordless drill with drill bit set Phillips screwdriver set Pencil Protective eyewear
Before starting the installation, please observe the following precautions: Turn off all audio system power, including the iPod, before making any connections. Always wear protective eyewear when using tools.

continued on next page.

INSTALLATION 3

Page 4

Choosing Installation Locations (continued)
Electronics Enclosure Location The Electronics Enclosure contains the wireless FM transmitter and the power supply for the three components. You can install it under a seat, in the center console compartment, or in the glove box. If possible, select a site that provides both convenient access to the enclosure and easy cable routing. Drive + Play also provides an audio interface to a cell phone, satellite radio, or any other device that outputs a low-level audio signal using the Aux In jack. When using the Auxiliary Input feature, select a mounting site for the electronics enclosure that provides easy access to the Aux In jack. Otherwise, you will need to purchase a 3.5mm stereo extension cable for a longer cable run (see Wiring Diagram on page 5). iPod Location With this system, you can place your iPod in any location that allows you to conveniently connect it to the Drive + Play iPod cable. Since you dont have to view the iPod or use its controls, you can place it inside the center console compartment, the glove box, or another hidden site.
Wireless FM Transmission This method is the most convenient and requires the least wiring. After setup, you simply tune your radio to the assigned FM frequency to listen to your iPod. Drive + Play has a built-in FM transmitter and its software provides a choice of five fixed FM frequencies or a tunable frequency for areas where none of the fixed frequency selections are available. See Initial Setup on page 9 for details. Wired FM Transmission For better quality FM transmission performance, consider purchasing our Wired FM Adaptor for direct connection (via the Antenna jack on the Electronics Enclosure) to your radios antenna input (see Wiring Diagram on the next page).

NOTE: Depending on your vehicle model, antenna plug adaptors may be required to connect the Wired FM Adaptor to your radio and antenna.
Connecting to Audio Out This method provides the best sound quality, but involves more wiring. After making the connections and setup, you will select Auxiliary Input or CD Changer on your audio system to listen to your iPod. See Initial Setup on page 9 for details.
NOTE: Since an iPod can get hot during operation, avoid tightly enclosed areas. Review About Operating and Storage Temperatures in your iPods Users Guide.
Planning the Installation
IMPORTANT: When routing wires from any of the components to the electronics enclosure, be sure to route them away from any moving parts such as the gear-shift levers, pedals, parking brake and steering column.
Temporarily place the main components at their proposed sites and lay out their interconnect cables to judge the cable routes (see Wiring Diagram on page 5 for wiring options). If a cable comes up short, try moving one or more components to find a better run. Next, inspect the vehicles interior assembly and locate areas where cables can be hidden or tucked into seams (e.g., under the center console housing, along body panel, etc.). Once you have found the ideal cable runs and component locations, mark the sites with a pencil and continue with the installation.
NOTE: In order to use the Audio Out, your audio system must have an auxiliary input jack or a CD changer input. A thirdparty interface is required for a CD changer interface. If your system has neither feature, FM transmission is the only choice for the audio interface.
Choosing a Power Interface
Referring to the Wiring Diagram on the next page, you can connect Drive + Plays power connections to your vehicles electrical system in one of two ways: Removable 12-Volt Accessory Power Cable With Cigarette Lighter Adaptor This power interface is the most convenient, since the power cable can be simply plugged into the vehicles cigarette lighter outlet. No additional wiring is required. The cigarette lighter adaptor is fuse-protected, and the fuse can be changed by removing the adaptors end nut.
Choosing an Audio Interface
Referring to the Wiring Diagram on the next page, you can interface the Drive + Plays audio output to your mobile audio system in three ways:
NOTE: If your cigarette lighter works even when the cars ignition switch is in the off position, youll have to turn Drive + Play on manually. It can be turned off manually, or it will shut off automatically after one hour of inactivity.

4 INSTALLATION

Page 5

Wiring Diagram

iPod Text Display Control Knob

Audio Input/Output Jacks

Tip = LEFT RIGHT = Ring Sleeve = GROUND
3.5mm Stereo Mini-Plug Cable

iPod Cable

Electronics Enclosure Side Back

Wireless FM Transmitter

Head Unit/Radio
or or 12-Volt Power Harness

Aux. L/R In Antenna In

3.5mm Stereo Cable (not included)

Line Out Cable

2A Fuse

CD Changer L/R In

Third-Party CD Changer Interface (optional)
Auxiliary Device (optional)

+12Vdc = yellow

Wired FM Adaptor (optional) 12-Volt Accessory Power Cable
Antenna Cable (disconnect from Head Unit/Radio)
Cell Phone, Satellite Radio, etc.

ACC = red GND = black

Direct Connection of the 12-Volt Power Harness With In-Line Fuse Holder Use this method when you want a permanent power connection to the vehicle. Also, by connecting the harnesss red wire to the ignition switchs ACC terminal, Drive + Play will turn on
or off with the vehicles ignition (ACC) switch. An in-line fuse holder provides protection for the unit.
IMPORTANT: Replace the in-line fuse only with one of the same type and rating.

INSTALLATION 5

Page 6

Installing Components

Installing the Electronics Enclosure At the selected site, install the Electronics Enclosure. Use either the enclosed cable ties or mounting screws, as shown below.
b. Select another viewing angle position (middle or top). Reassemble the parts in reverse order and tighten the recessed hex screw.

3mm Hex Key Display Base

Display Assembly
2. At the base, using the 1.5mm hex key, loosen (but do not remove) the hex setscrew. Installing the Text Display 1. Temporarily place the Text Display at the proposed site and check the default viewing angle while adjusting the pivot arm. If it meets your needs, then skip to step 2. Otherwise, change the viewing angle as follows: a. Using the 3mm hex key, loosen the recessed hex screw (inside the display base) until the pivot arm is free from the display assembly. The hex screw will remain captive. 3. To install the Text Display with adhesive tape, perform the following steps or skip to step 4: a. Insert the mounting plate, rotate it 180, and tighten the hex setscrew as shown below.

Hex Setscrew Recessed Hex Screw Mounting Plate

6 INSTALLATION

Adhesive Pad

Page 7

b. At the proposed site, wipe the surface and exposed mounting plate with one of the enclosed alcohol pads. Allow both to dry. c. Remove the protective tape from one side of one of the enclosed adhesive pads, and press the pad against the mounting plate. d. Remove the remaining protective tape, and press and hold the Text Display to its site for 5 seconds. 4. To install the Text Display with mounting screws, perform the following steps: 1. Place the Control Knob at the site and check the operation angle with the default 30 base. If it meets your needs, then skip to step 2. Otherwise, change the base as follows: a. Using a Phillips screwdriver, remove the two screws from the bottom of the base and set the internal mounting plate aside.

Control Knob

30 Base

Internal Mounting Plate

Hex Setscrew Arrow Mounting Plate
b. While holding the base, grasp the Control Knob and turn it to the right until you feel it release from the base. Slide the base off the attached cable and put it aside. c. Select another base (0 or 60) and thread the cable through the base to meet the Control Knob. d. Place the new base against the Control Knob bottom and turn it to the left until it locks. Route the attached cable through the bases opening. Fasten the internal mounting plate to the base with the screw(s) from step a.
a. At the proposed site, place the mounting plate and rotate it so that the arrow will point toward the hex set-screw at the back of the base after its mounted. b. Holding the mounting plate in position, fasten it to the surface with three enclosed mounting screws. c. Place the Text Display on the mounting plate (180 from its final position), and then rotate it a half-turn to the final position. Tighten the hex setscrew at the back of the base. 5. Route the attached cable to the Electronics Enclosure. Installing the Control Knob
NOTE: The 60 base uses two screws, while the 0 base uses one screw. continued on next page.
Control Knob 0 Base Cable Through 0 Base and Internal Mounting Plate
NOTE: The Control Knobs cable can be routed differently for adhesive or screw mounting. The default cable route is through the back of the base and should be used when mounting the base with the supplied adhesive pad. For screw mounting, the cable can be routed through the center of the base and through a hole that must be drilled in the mounting surface. You may use the mounting plate as a template.

INSTALLATION 7

Page 8
Installing the Control Knob (continued) 2. At the base (below the cable), using the 1.5mm hex key, loosen (but do not remove) the hex setscrew. 3. To install the Control Knob with adhesive tape, perform the following steps or skip to step 4: a. Insert the mounting plate, rotate it 180, and tighten the hex setscrew.

Control Knob With 0 Base Mounting Plate Arrow Control Knob With 0 Base
5. Route the attached cable to the Electronics Enclosure. Installing the iPod Cable

Mounting Plate

Route the iPod dock connector cable to the chosen iPod site (e.g., the center console compartment or the glove box). Be sure to leave enough cable exposed to make connecting and disconnecting the iPod easy. Making the System Connections With all power off, refer to the Wiring Diagram on page 5 and make only the power, ground and audio signal connections that apply to the scheme you have chosen. After verifying all connections including the iPod, proceed to the next section, Operating Drive + Play.
b. At the site, wipe the surface and exposed mounting plate with one of the enclosed alcohol pads. Allow both to dry. c. Remove the protective tape from one side of one of the enclosed adhesive pads, and press the pad against the mounting plate. d. Remove the remaining protective tape, and press and hold the Control Knob to its site for 5 seconds. 4. To install the Control Knob with mounting screws, perform the following steps: a. At the proposed site, place the mounting plate and rotate it so that the arrow will point toward the hex set-screw at the back of the base after its mounted. b. Holding the mounting plate in position, fasten it to the surface with three enclosed mounting screws. c. Using the mounting plates center hole as a template, drill a hole through the mounting surface and pass the Control Knobs cable through the hole. d. Place the Control Knob on the mounting plate (180 from its final position), and then rotate it a half-turn to the final position. Tighten the hex setscrew at the back of the base.

OPERATING DRIVE + PLAY

Distraction Warning
Do not connect or disconnect your iPod or program Drive + Play while driving. Always pull off the road and park in a position that you are absolutely sure presents no risk before browsing your iPod or adjusting the settings on your Drive + Play. Always obey all traffic laws while driving.

Overview

Scroll Left Once to Last Menu Item

Scroll Ring

Press Once to Jump to Last Screen
Scroll Left and Hold to Jump Back In Now Playing, Scroll Left to Fast Rewind
Scroll Right Once to Next Menu Item Scroll Right and Hold to Jump Forward In Now Playing, Scroll Right to Fast Forward
Press Once to Play Last Track

Previous/Rewind

Next/Fast Forward
Press Once to Play Next Track

Select

Press Once to Stop or Resume Play of Current Track

Play/Pause

Press Once to Choose Highlighted Menu Item

8 INSTALLATION/OPERATION

Page 9

OPERATION

Drive + Play operates much like the iPod itself. The Control Knob mimics the iPods Click Wheel, and its software uses a similar menu-select system. Before you use Drive + Play, youll need to set it up for the first time. After you perform the Initial Setup using the Settings Menu, controlling your iPod with Drive + Play will be easy and intuitive. To make selections on the Text Display, you simply turn the Control Knobs Scroll Ring to highlight a desired menu item. Turn the Scroll Ring to the right to scroll down, and to the left to scroll up. Press the (center) Select button once to confirm your selection. Depending on your selection, this display may show: a list of settings or menu operation, or a highlighted setting with a choice of values, or a highlighted setting with a check box, or a graphic display which may be adjusted using the Scroll Ring. When in any of the settings menus: Drive + Play will tell your iPod to play the same selection as when it was last turned off. If you plugged your iPod into Drive + Play while it was playing, Drive + Play will tell the iPod to play the current song without interruption. However, if nothing was playing when your iPod was last turned off or when it was plugged in, Drive + Play will tell the iPod to begin playing the first song in its Songs database.
Setting FM Transmission FM Settings can be accessed from the Main Menu or later within the Settings Menu. To turn FM Transmission on or off: Drive + Play Menu > FM Settings > FM Transmitter> select On (default) or Off. To change the preset FM Frequency: Drive + Play Menu > FM Settings > FM Frequency > select 88.1 (default), 88.3, 88.5, 88.7, 88.9 or Custom (default = 91.7MHz or last setting).
Pressing the (center) Select button again will select the next highlighted setting (to the right) or go back to the beginning if all settings have been viewed, or set the check box on or off (i.e., check or uncheck). If a graphic display appears, use the Scroll Ring to adjust the setting. After making your adjustment or selection, you may press the (top) Menu button to go to the previous menu. If no buttons are pressed within 10 seconds, the Now Playing screen will appear. At this point, pressing the Menu button will take you back to the screen of your previous selection. Repeated Menu presses will take you back to the Drive + Play Menu.

NOTE: If the preset FM frequencies are already assigned to FM stations in your listening area, then use Custom FM Frequency (below) to select an unused frequency. The default setting is 91.7MHz.
To select a Custom FM Frequency: 1. Drive + Play Menu > FM Settings > Custom Frequency. 2. The FM Frequency graphic display will appear. Scroll to select a desired FM frequency. Setting Shuffle You can set Drive + Play to shuffle (randomly play) iPod songs or albums as follows: Drive + Play Menu > Settings > Shuffle > select Off (default), Songs or Albums.

Initial Setup

NOTE: Please refer to Drive + Plays display screen as you make initial settings. Also refer to your iPod Users Guide for operation information.
Power On 1. With the main volume turned down (on your audio system), power on your entire mobile audio system and then turn on Drive + Play by pressing the (bottom) Play/Pause Button. If everything is operating correctly, the iPod screen will display the following message: OK to disconnect. 2. Drive + Plays Text Display will show the Harman Kardon splash screen first, followed by the Now Playing screen. What the Now Playing screen displays next depends on the following conditions:
Setting Repeat You can set Drive + Play to repeat the current iPod song or all songs in a playlist or album as follows:
NOTE: When browsing by Artists, Genres or Composers, selecting Repeat All will repeat the album that contains the selected song.
Drive + Play Menu > Settings > Shuffle > select Off (default) > One > All.

OPERATION 9

Page 10
Initial Setup (continued)
Setting AUX Input To route an audio signal from a device (e.g., cell phone or satellite radio; see Wiring Diagram on page 5) connected to Drive + Plays auxiliary input to your mobile audio system: To enable or disable automatic sensing and switching of audio signals on Drive + Plays auxiliary input: Drive + Play Menu > Settings > select Auto audio sense check box to enable or to disable (default) it. To select Auxiliary input signals manually with iPod connected: 1. Drive + Play Menu > Settings > AUX input. 2. Go Back (on) will appear. To restore audio from the iPod manually with iPod connected: 1. Drive + Play Menu > Settings > Go Back (on). 2. Audio from the iPod will be restored, and the Settings Menu will appear. To enable/disable AUX input manually, when no iPod is connected: 1. Turn on the Drive + Play. Aux is Disabled is highlighted. 2. Press (center) Select button once to enable AUX input. Listening to AUX message will appear. 3. Press Select button again to disable AUX input. Aux is Disabled message will appear. Setting the Display You can customize Drive + Play to display your viewing preferences as follows: To enable or disable Large Fonts: 1. Drive + Play Menu > Settings > Display Settings > select Large Font check box to turn it on or off (default). 2. To enable or disable Large Fonts, press the (top) Menu button twice to return to the Drive + Play menu.

When Large Fonts are enabled, you can also enable or disable Auto Scroll, which automatically scrolls a text message longer than 16 characters in the Now Playing screen: Drive + Play Menu > Settings > Display Settings > Auto Scroll > select On or Off (default).
To adjust the displays contrast: 1. Drive + Play Menu > Settings > Display Settings > Adjust Contrast. 2. The Contrast graphic display will appear. Scroll to select a desired contrast.
To adjust the displays backlight: 1. Drive + Play Menu > Settings > Display Settings > Adjust Backlight. 2. The Brightness graphic display will appear. Scroll to select a desired brightness.
You can set Drive + Plays backlight to turn off after 10 seconds. When it is off, pressing any button on the Control Knob will turn it back on. To turn the displays backlight timer on or off: Drive + Play Menu > Settings > Display Settings > Backlight Timer > select On (default is always on) or 10 sec.
To enable or disable an inverted display (i.e., white text on black background): Drive + Play Menu > Settings > select Display Settings check box to enable or disable (default) it.
Setting the Drive + Play (Main) Menu You can set the Drive + Play (Main) Menu to display your choice of menus as follows:
NOTE: As a default, the following eight menus will be displayed (denoted by checked boxes): FM Settings, Now Playing, Playlists, Artists, Albums, Songs, Genres and Composers. If you want all these selections to display, then skip this section.
1. Drive + Play Menu > Settings > Change Main Menu. 2. Scroll to a selection (e.g., Composers) you want to remove and press the (center) Select Button once to uncheck the box. To add the menu again, press the (center) Select Button once to check the box. 3. Repeat step 2 for other menus you want to remove from or add to the Main Menu.
NOTE: When Large Fonts is disabled (unchecked), the Now Playing screen can display up to 32 characters. When Large Fonts is enabled (checked), the first 16 characters will be displayed and you can press the (center) Select button to display the next 16 characters and again to display the first 16, or use Auto Scroll (see next item).

10 OPERATION

Page 11
Setting the Sleep Timer Drive + Play is equipped with a sleep timer that delays its power off by a default of 2 seconds after the ignition is turned off. You can set a different delay time as follows:
Now Playing Song Title Artist TO1 0:00
NOTE: Sleep Timer only works when the Drive + Plays ACC wire is connected to the ignition switchs accessory terminal (see Wiring Diagram on page 5).
Drive + Play Menu > Settings > Sleep Timer > select 2 sec (default), 4 sec, or 8 sec.
Setting the Jump Size When browsing a database (songs, albums, artists, etc.), you can scroll and hold to jump to a different position in the list, skipping over undesired titles. The default jump size is 10 percent of your database. You can set a different jump size as follows: Drive + Play Menu > Settings > Jump Size > select 5%, 10% (default), 15%, 20%, or 25%.

NOTE: Now Playing, Playlists, Artists, Albums, Songs, Genres or Composers will only appear in the Main Menu after they have been checked for display (see the previous page).
Browsing Playlists Drive + Play Menu > Playlists > select a playlist (e.g., Favorites) > select a song.
NOTE: The On-The-Go playlist will not be updated while using Drive + Play.
Browsing Artists Drive + Play Menu > Artists > select an artist > select an album > select a song. Drive + Play Menu > Albums > select an album > select a song. Drive + Play Menu > Songs > select a song. Drive + Play Menu > Genres > select a genre > select an artist > select an album > select a song. Drive + Play Menu > Composer > select a composer > select an album > select a song.
About Drive + Play You can view information about Drive + Play as follows: Drive + Play Menu > Settings > About. Resetting All Settings

Browsing Albums

NOTE: Resetting all settings will erase all your custom settings and replace them with default values.
To reset all Drive + Play settings to their default values: 1. Drive + Play Menu > Settings > Reset All. 2. After a few seconds, you will see the Harman Kardon splash screen, followed by the Now Playing screen. At this point, all Drive + Play settings have been reset.
Browsing Songs Browsing Genres

Browsing Composers

Browsing and Playing Songs
Browsing and playing songs using Drive + Play works much like an iPod. Using the Control Knob (see Overview on page 8), you can play songs in any playlist, or play songs in categories such as Artists, Albums, Songs, Genres or Composers.
Shuffle Play You can set Drive + Play to shuffle (randomly play) iPod songs or albums as follows: Drive + Play Menu > Settings > Shuffle > select Off (default), Songs, or Albums.
NOTE: Drive + Play does not support chapter search when playing an Audiobook. You may use the scroll wheel to move forward or backward manually.
Press the (center) Select Button to advance through menu items to locate and play songs. Press the (top) Menu Button to go back to a previous menu.
Repeat Play You can set Drive + Play to repeat the current iPod song or all songs in a playlist or album as follows:

When a song starts to play, the Text Display will show the Now Playing screen (see above right) with Song Name, Artist, track number and the elapsed play time. You can also set Drive + Play to shuffle-play or repeat-play a song or album.
NOTE: When browsing by Artists, Genres or Composers, selecting Repeat All will repeat the album containing the desired song.
Drive + Play Menu > Settings > Shuffle > select Off (default), One, or All.

OPERATION 11

Page 12

TROUBLESHOOTING

Problem:
Message = iPod Disconnected

TECHNICAL SPECIFICATIONS

Dimensions of Electronics Enclosure: 6" (152.0mm) x 1-14" (32.4mm) x 2-58" (66.4mm) (W x H x D) Maximum Mounting Diameter of Text Display: 1-1316" (46.2mm) Maximum Mounting Diameter of Control Knob: 1-1316" (45.9mm) Fuse Rating: 2A Nominal Current Requirement with iPod Connected: 500mA Line Output Voltage: 1V Maximum Auxiliary Input Voltage: 1V Audio Input and Output Jacks: 3.5mm stereo mini-plug
All features and specifications are subject to change without notice. Harman Kardon and Harman International are registered trademarks, and Drive + Play is a trademark, of Harman International Industries, Incorporated. Apple and iPod are registered trademarks of Apple Computer, Inc.

Solution:

Check that the iPod Connection Cable is connected between the Electronics Enclosure and the iPod.
Message = AUX is Disabled
Check AUX Input (see page 10). Check the connection between the Electronics Enclosure and the auxiliary device.
Hearing static when playing the iPod with wireless FM transmission.
Interference from an FM station at the same frequency. Try another FM frequency (see page 9). Consider installing the optional Wired FM Adaptor (see page 5).

Information for the User

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Drive + Play wont turn on.
Replace the in-line fuse with one of the same type and rating.
Message = Please update your iPod software
Download and install the latest software version for your iPod (see Apple.com).
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Technical Support

If you are having other problems with Drive + Play, please contact us at: 1 (516) 255 HKHK (4545) Or on the Web at: www.harmankardon.com
250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com 2005 Harman International Industries, Incorporated. All rights reserved. Part No. 950-0081-001 revB

12 TROUBLESHOOTING

 

Tags

F17C LE Light Iden I880 S6120 ALL-IN-ONE 2000 A1 CS-E12CKP 330XI CE-5430 Creator PD-M435 C TOP Mkiii NEC E616 WS-7078-UF S651M DPX-510 Control 2 Powershot A520 Turbo Veriton 2800 Review SAT-A55 MFC-7150C Privileg 470 CW29M66V KX-TG2238 Mhcc405 Devireg 550 Pronto RF PRO 88 HK400XM KDL-26S2000 FS-3700 M228WA-BM D-R400 Philips MZ-3 MF5730 21PT135A WJS1272 Bolex B8 DA4002 Starplus STS FTM-350 Medistar S KRC-194A Soliris IB YZ250-1998 RC-2000mkii Deluxe Automatic-2006 1400W AJ-HD1400 19HFL3340D 705CD Impressa X90 Gf-200 Inforad M1 Option Models Cronometro 700 Oxygen DCR-TRV130E UT13118 Scanjet 4850 Sennheiser K6 SH-S223C BFH3520 FM19AH Kd-g343 MV16P RRM112 ZS204 8HP-1998 TS-W1201C Samsung U900 Touch PRO2 Keyboard 200 Olympus X-41 Xsat 410S DC C750 Secrets AX64 PRO Mobile Cglm23-2H 5-5 6G LE32C457c6H 2400 XT HDR255 HD4QE22SC GX210 Digital FS-9000 PA 3630 DCR-SR88E Programchart HP-136 VA712B CD163 Travelmate-2420

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101