www.hertzaudiovideo.com

Power Supply

Power supply voltage: Idling current: Idling current when off:
1115 VDC 1.5 A 0.02 mA 45 A
1 FR-4 dual-layer 70 m copper thick PCB and robust copper bars for high current transfer,
Consumption @ 2 , 14.4 VDC (Max Musical Power):
shorter audio signal paths and high reliability.
2 The output stage features 2 + 2 SANKEN TO3P 2SC3284/2SA1303 transistors pairs for
each channel, providing the highest current and power delivery.

Amplifier stage

Distorsion - THD ( 1kHz @ 4 Bandwidth (-3 dB): S/N Ratio (A weighted @ 1 V): Damping factor (1kHz @ 4 Pre-In sensitivity: Pre-In impedance: Speaker-In sensitivity: Speaker-In impedance: Minimum Load impedance: 4 Ch 3 Ch 2xCh ): ): 0.08
3 The power supply stage is based on Dual Multi-winding toroidal transformers and Low ESR
105C electrolytic capacitors.
4 Special pseudo-balanced dual input circuitry to reject electromagnetic disturbances present
7 60k Hz 98 dB 130 0.V 15 k 1.V +1x4 4
on the Pre-amplified or Speaker-In.
5 Pre-amplified and Speaker-In allow interface with aftermarket or OEM sources.
Speaker-In are provided with compact install-friendly connector.
6 ARTTM-Automatic Remote Turn-On/Off function turns the amplifier on and off in perfect
sync with the source, eliminating the need for a remote signal when using the Speaker-In. Remote Out signal is also provided to turn on/off other components installed in the system. 7 Flexible 12 dB/Oct. crossover system allows full range, hi-pass or lo-pass configuration. In lo-pass configuration a MIX function can be selected on B Channels, providing the ability for the amplifier to combine L&R input signals to drive the subwoofer system in a mono configuration. 8 B Channels feature Bass Boost control adjustable within the dB range at 45 Hz for best bass frequency enhancement in 3-channel mode front plus subwoofer configuration. Input configuration Filter configuration

Config.

CEA 2006-A RATINGS
RMS Power(4 , 1%THD+N, 14.4 Volts): 100 W x 4 Ch

Input / Filter

B XOVER MODE

B Ch C

STEREO MIX
S/N Ratio (ref. 1 W output): 76 dBA OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%: 4 Ch 100 W x 4 (4 ) 4 Ch 160 W x 4 (2 ) 3 Ch 100 W x 2 (4 ) + 320 W x 1 (4 ) 3 Ch 160 W x 2 (2 ) + 320 W x 1 (4 ) 2 Ch 320 W x 2 (4 )

4 Ch 3 Ch 2 Ch

A= stereo B= mono

Sterero/Mix

Apply same L&R signal Apply same L&R signal using RCA Y-adapter using RCA Y-adapter

Other functions

Remote In: VDC - 1 mA Remote Out : 12 VDC - 15 mA Automatic Remote Turn-On/Off ARTTM: with Speaker-In Fuse: 3 x 30 A

Filters & Controls

A Channels B Channels B Channels Full / Hi-pass / Lo-Pass Hz @ 12 dB/Oct. Full / Hi-pass / Lo-Pass (Stereo/Mix) Hz @ 12 dB/Oct. Bass Boost 0 +12 dB @ 45 Hz

Measure

Max size (mm/inches): 240 x 500 x 54 / 9 15/32 x 19

Inputs/Outputs

Input PRE / Speaker

x 2 5/32

Weight (kg/lb):

5,42 / 11.94

- 62018 Potenza Picena (MC) Italy - Tel. +870870 - Fax +870880 - www.elettromedia.it