Hilti DD 200

diamond coring system
More punch, higher performance, as simple as ever.
Hilti. Outperform. Outlast.
Applications Drilling penetrations, e.g. for plumbing/ heating pipes or ventilation ducts Drilling corner holes for wall sawing door and window openings Large-diameter holes, e.g. for shafts Stitch drilling, e.g. creating openings for cable trays Angular drilling, e.g. for the installation of gas pipes Blind holes Advantages Optimized drive unit with higher torque for even higher performance LED Power Controls help inexperienced users achieve maximum efficiency Quick and easy to use: new keyless BL chuck and connection end system for fast bit changes Service indicator warns in good time when servicing is due for less down time and lower maintenance costs
The all-out coring machine. For the most demanding requirements.
Welcome to the new power generation. The DD 200 diamond coring system provides an impressive combination of power and performance coupled with exceptional convenience and ease of operation with considerably higher torque for fast, effortless coring in all diameters right up to 400 mm.
Highlights Exceptionally powerful: the DD 200 also drills larger diameters significantly quicker New gearing for peak performance: up to 60% higher torque for rapid drilling progress even under the most demanding conditions Straightforward from beginning to end: convenient to transport and easy to set up and operate simply a pleasure to use

Max. torque, 230 V [Nm]

DD 250 DD 200

new DD 200

Max. torque, 110 V [Nm]
The new Hilti DD 200 now with higher torque for even higher performance makes coring easier than ever before and gives the user that extra edge.
Maximum versatility: drills precisely at almost any angle, e.g. for gas pipes.

Efficient core bits

The new H line core bits are tuned for optimum performance in this power class. They drill faster, last longer and thus cut the cost of every meter drilled.

Light weight drill stand

Extremely easy to transport and set up a single square-drive wrench is all thats required. Rigid and secure, with only 3 adjusting screws for maximum simplicity. Built-in fine feed mechanism and stepless angle adjustment.

LIFETIME SERVICE

Lifetime REPAIR COST LIMIT

NO COSTS Lifetime

MANUFACTURERS

WARRANTY

Anything but business as usual: First-class service for all Hilti tools for the tools entire lifetime!

Performance data

Voltage (V ) Drilling diameter range (mm) Rated power (W) Rated current (A) Speed under load (r.p.m.) Torque under load (Nm) Gear range 12./ 435 / / 45 / 2300 22./ 400 / / 40 / (min. 25, max. 400)
1st gear mm (6 16") 2nd gear 82162 mm (8") 3rd gear 25 - 82 mm (1 4")
Rigid and secure in all positions: ideal for drilling corner holes for wall sawing door and window openings.
Weight of machine as per EPTA 1/2003 (kg)
Right of technical changes reserved.
Drive unit and drill stand
Ordering designation Item no.
DD 200 drive unit, complete DD-HD 30 drill stand, complete

Fastening elements

DD-HD30-VBP vacuum base plate HKD-E M16 x 65 anchors HSD-G manual setting tool for HKD-E anchors DD-CS-M16 clamping spindle DD-CN-SML clamping nut DD-HD30-SL bracing spindle Quick-release brace 009870
Hilti = registered trademark of Hilti Corp., Schaan | W0-en | 1 Printed in Liechtenstein | 2006 | Right of technical and programme changes reserved S. E. & O.
Water supply and disposal
DD-WFI water flow indicator Water supply unit DD-HD30-WCH water collector holder Water collector rings and sealing rings, 8-250 mm diameter

Accessories

DD-HD30-W wheel set (set of 2) DD-HD30-SP spacer (extends drilling diameter range by 150 mm) DD-HD30-XT extension rail (1 m) DD-HD30-XT30 extension rail (30 cm) DD-BL-ET 300 core bit BL extension (30 cm) DD-BS-ET hex. core bit BS extension, steel and aluminium

Productivity plus

Vacuum pumps for securing the drill stand quickly with the vacuum base plate no anchors required
Universal vacuum cleaner for constantly high performance in wet and dry applications
Powerful rotary hammers for tough drilling jobs
Anchor systems for light, medium and heavy-duty applications
Hilti Corporation | 9494 Schaan | Liechtenstein | P +423 234-2111 | F +423 234-2965 | www.hilti.com

cid_etlx V. 10.1 GIESE

For information only, will not be exchanged when altered!
QuantityUnit Description Specifications

Date Proc.restr.

27.08.2007 09:24

Cnt-no Item-no

280029 279515
piece Motor housing piece Stator 100V-127V piece Staple piece Recess tapping screw 3,9X19 piece Ring KOLLEKTORSEIT. piece Rotor 100V-127V packed piece Bearing plate assy piece Circlip JL32 piece Shim ring 22x32x1,5 piece Ball bearing 12X32X10 piece Ring piece Sleeve piece Slotted tapping screw 4,8X25 piece Air deflector piece Carbon brush 100V-127V set piece Terminal tab piece Brush holder assy piece Slotted tapping screw C 3,9X13 piece Housing piece Brush cap left piece Torx-soc re scr 4X10 T20 black piece Brush cap right piece Housing end cap printed piece Torx-soc re scr 5X28 T20 black

Spare parts list

HILTI Aktiengesellschaft Schaan/FL
Hilti = registered trademark of Hilti Corp., FL-9494 Schaan, Principality of Liechtenstein 2001 - 2006, Right of technical and programme changes reserved, S.E. & O.

Item-no 279558

Index Description

valid as fro Drawing

14.03.07 350179

Page 1 / 6

Diamond coring tool DD 200 120V assy

51139 51161

piece Ball bearing 8X22X7 piece Lid piece Torx-soc cap screw 3X12 T10 black piece Lid piece Torx-soc re scr 4x18 T20 black piece Adhesive label PRCD piece Adhesive label WASSERFANG piece Multi-connector 6,3mm piece Torx-soc re scr 3X10 T10 piece Tab terminal 4,8 mm piece Electronics 100V-240V packed piece Lightguide 2 piece Lightguide 1 short piece Switch piece Protective cap piece Terminal block TYP1000/2DS piece Hanger clamping piece Taptite screw CM3,5X10 T10 piece Clamp piece Supply cord 120V USA piece Protective sleeve 12MM piece Gear housing packed piece Ball bearing 30x62x20 piece Supporting washer S50X62 DIN 625-3 DIN 988 3.1990 3.1990 national purchase national purchase

Page 2 / 6

279372 70402
piece Circlip 62X3 piece Ball bearing 15x35x14 piece Needle bearing 15x23x20 piece Supporting washer S30X42 piece Circlip 30X2 piece Rotary shaft seal AS30X62X7 piece Bearing cover packed piece Rotary shaft seal 14,8x25x7 piece Ball bearing 12X37X12 piece Needle bearing 20x32x20 piece Safety clutch packed piece Shaft z14 assy piece Feather key A5X5X40 piece Shim ring 15X22X1,5 piece Shaft BL piece O-ring 17X2,5 piece Toothed gear Z40 piece Circlip 28X1,5 piece Setting lever boss Z18 assy piece Setting lever boss Z18 piece Pin 7x31 piece Setting rod piece Compression spring 0,7x4,3x8,5 piece Ball 5 G80 DIN 3760 9.1996 NBR national purchase DIN 988 3.1990 national purchase

Page 3 / 6

111 112

46833 46905

piece Toothed gear Z37 piece Toothed gear Z50 piece Toothed gear Z60 piece Washer 24,1x33,5x2 piece Circlip 24x1,75 piece Shaft Z26 piece Seal 1,5 piece Setting lever boss Z18 piece Switch piece Spring pin 5x28 piece O-ring 16X2 piece Screw plug Service assy piece O-ring 11,5X1,5 piece Taptite screw M4X10 piece Hex nut with flange M8 piece Hex skt hd cap screw M8X20 black piece Tool suspension piece Lid right piece Lid left piece Hex skt hd cap screw M6X40 piece O-ring 30X2,5 piece Bushing piece Water connection assy piece Ball cock G1/4"

Page 4 / 6

810 826

30214 280102

piece Hose assy piece Hose coupling assy piece O-ring 10,85X2,75-NBR 70 piece Hose coupling piece Water swivel packed piece Rotary shaft seal 40X55X7 piece Torx-soc ov screw M6x16 T20 black piece Attachment piece Chuck DD-CS-BL piece Absorber ring piece Washer 48x38x1 piece Circlip 38x1,75 piece Hex skt hd cap screw hohl piece Retaining ring A38 piece Sleeve piece O-ring 34,65X1,78 piece Chuck DD-C-BL piece Hex skt hd cap screw M6X55 black piece Spade grip assy piece Torx-soc ov screw M5x20 MK T20 black piece Rating plate DD 200 120V USA piece Oil Kluebersinth GH 6-80 5L piece Grease MOLYKOTE TP42 100G piece Grease PETAMO GHY 133 N 400G

Page 5 / 6

piece Adhesive LOCTITE 243 50CCM

Page 6 / 6