Instructions for use Notice d'utilisation

GB F NL I E

15LD2550EB
Gebruiksaanwijzing Istruzioni per l'uso Manual de Instrucciones

QUICK GUIDE

IMPORTANT - If placing TV into cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides, rear and top of the TV. This is to allow for adequate ventilation during operation. Please read the main Users Guide for more safety information before installation.
insert the batteries into your handset

Rear view

either connect the aerial straight to your TV.

Aerial (RF) Lead

wall socket

Aerial (RF) Socket

.or connect the aerial through a VCR.

TFT-LCD TV

(RF) connector lead VCR to TV wall socket
Optional Scart Lead Aerial (RF) Socket VCR TV to VCR

ANT.IN

It is recommended that a scart lead should be fitted between your TV and VCR to enhance your picture and sound quality. Scart leads are essential if you have a stereo TV and VCR and wish to obtain stereo sound from your equipment. These leads can be purchased from your Hitachi dealer or any good High Street electrical retailer.
.or through a satellite decoder.

Aerial

RF Lead from Satellite to TV
Scart Lead to AV-1 on TV.
RF Lead to Aerial Satellite LNB lead
.or through a VCR and satellite decoder.

RF Lead from VCR to TV

RF Lead from VCR to Satellite Aerial

RF Lead to Aerial

Satellite LNB lead
connect the TV plug to the mains socket

UK plug

Power Cord Power on/off Input button

European plug

Plug the mains lead into the TV.

insert plug.

.and switch on
switch your TV on by pressing the On/Off button

Front View

NB: When the set is first switched on, the set will be in standby and the indicator on the front of the set will illuminate red. Press the channel up down (P- , P+) or numeric buttons (1, 2, 3,.) to operate.
basic functions of remote control

AV SOURCE INFO

-/-EXIT
To select a programme number.
Programme Up Programme Down

Volume Up Volume Down

For navigation of the menus

TV/DTV

To enter the main menu

P<P/SWAP

RC1055
important note before starting Auto Setup
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV please ensure that they are switched on before automatic tuning begins. In the case of a VCR, insert a pre-recorded tape and begin playback of your equipment. These measures ensure that all your external equipment is tuned in during the Auto Setup procedure.
start A.P.S. (Auto Programming System)

First time installation

Choose Country
Set country and continue installation
When the TV is turned on for the first time, the menu for the language selection appears on the screen. The message Welcome please select your language! is written in all language options sequentially in the menu on the screen. By pressing or buttons highlight the language you want to set and press OK. After then, First time Installation Menu will appear on screen. By pressing or buttons, select country item you want to set and press OK button.
Do you want to start automatic search?
After the First Time Installation is set, the following message appears on the screen. To start automatic search, select Yes, to cancel select No. This process will take about five minutes. To cancel searching, you can press MENU button at any time during the process.

English - 1 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 1
A.P.S... 25 A.P.S. (Auto Programming System) Country.. 25 Teletext Region.. 25 Program Table.. 25 Name.. 25 Move.. 26 Delete.. 26 APS (Auto Programming System).. 26 Favourite Mode.. 26 Install Menu in AV Modes.. 26 Programming.. 26 Colour System.. 26 Other Features.. 26 TV Status... 26 Mute Indicator... 26 AV Modes.. 26 Menu System in AV Modes. 27 Sound/Picture/Features/Install Menu.. 27 Personal Preference.. 27 Teletext... 27 Connect Peripheral Equipment.. 28 Via the Scart... 28 Via Aerial Input.. 28 Via AV Input... 28 Audio Line Out.. 28 Headphones... 28 Peripheral Equipment Connections. 29 Aerial Connection.. 29 Troubleshooting.. 30 Specifications.. 31 Pin Specifications... 32
English - 2 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 2

Safety Precautions

Please read the following recommended safety precautions carefully for your safety.
DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DONT place water filled vessels on top of T.V. cabinets. DONT remove any fixed cover as this may expose dangerous voltages. DONT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. DONT use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving. DONT obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. DONT use makeshift stands and NEVER fix legs or stands to the TV with any screws other than those provided - to ensure complete safety always use the manufacturers approved stand with the fixings provided. DONT allow electrical equipment to be exposed to rain or moisture.
IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV

Dos and Donts

This Television has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO consult your dealer if you are in any doubt about installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. This TV is supplied with a fitted mains plug. This plug must not be cut off as it may contain a special radio interference filter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate safety approved extension lead or consult your dealer. Observe the manufacturers instructions when connecting extension leads to the TV. Check the fuse rating on the new plug, this should be fitted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1 362) approvals, these are easily identifiable by either the or symbols. If you are in any doubt about the installation of an extension lead, please consult a competent electrician.

U W 9U W

X D9@

B VD9@

Q 1 Q T X

5&

Remote Controller RC1055

Batteries 2 X AA

Instruction Book

Quick Guide
English - 6 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 6

Remote Control Buttons

Standby Direct programme External source Info Programme up/down OK (Select) Cursor buttons Menu GREEN/Page down/Picture RED/Page up/Sound Subtitle on/off in the digital mode Teletext on/off Mix Image size/Expand Previous programme/SWAP Personel preference Reveal Index Page / Electronic programme guide (EPG) Update Hold Install/Blue Feature/Yellow TV / DTV Mode Mono-stereo/Dual I-II Volume + / Volume Double digit Mute
XD9@ BVD9@ H@IV UW9UW 678 9@A BCD

6W TPVS8@

DIAP DDD

Q1QTX6Q

English - 7 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 7

LCD TV Front View

3&+

QSPBS6HH@ VQ9PXI

WPGVH@ VQ9PXI

TU6I97`

C@69QCPI@

DSSrprvr

ThqiG@9
Rear View and Peripheral Connections
VIDEO INPUT AUDIO INPUT (L, R) SCART ANTENNA AUDIO LINE OUTS HEADPHONE

* COMMON

INTERFACE (CI SLOT)
English - 8 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 8

Preparation

For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.
Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part. Insert two AAA/R03 or equivalent type batteries inside. Place the batteries in the right directions. Replace the battery cover.
Use this device in tropical and/or moderate climates.
Before Switching On Your TV
Power Connection IMPORTANT: The set should be operated only from a 220-240 V AC, 50 Hz. outlet. Connections to the Aerial Input Socket Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV and connect the cable plug coming out from the TV to the out socket located on the devices (VCR, DVB etc.). Note: Remove the battery from the remote control handset when it is not to be used for a long period. Otherwise, it can be damaged due to any leakage of batteries.
Handling the Remote Control
It could cause corrosion or battery leakage and may result in physical injury and/or property damage including fire. Never mix used and new batteries in the device. Replace all the batteries in a device at the same time. Remove the batteries if the remote control is not going to be used for an extended period of time. To avoid possible failure, read the following instructions and handle the remote control properly. Do not drop or cause impact to the remote control.

867G@UW

9+)8+)

S@6SPAUC@UW

Do not spill water or any liquid on the remote control. Do not place the remote control on a wet object. Do not place the remote control under the direct sunlight or near sources of excessive heat. Remove the battery from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of battery.
Inserting Batteries in the Remote Control. Handset
WARNING: Remote control is battery included. NOTE: A plastic protector is used to disconnect the batteries in order to prevent the battery life from reducing. Please remove the plastic protector before the first use. English - 9 -
A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 9
Operating Range for the Remote Control Point the top of the remote control toward the LCD TV's remote sensor LED while pressing a button.
Navigating the Menu System

Ahvthv

Upsvpuvpr Aqvyhvt rv

H@IV UW 9UW

Press MENU to display the menu. Press a or b button to select an icon. Press ` for more options. Use a or b button to highlight. Press _ or ` buttons to change the settings. Press OK to set as default.
To exit the menu or to return from sub-menu screen, press MENU. Note: These explanations are valid for the navigation of the entire menu system. To select options that are explained in the following parts, refer to Navigating the Menu System part.

T P V S8 @ D IA P

DD D Q 8 C

H @IV

U W9U W

B V 9 D @

Q1 Q T X 6 Q
Remote range is approximately 7m/23ft.

Switching the TV On/Off

To Switch the TV On Your TV will switch on in two steps. Connect the power cord to 220-240V AC 50 Hz. Press stand-by button. Then the TV switches itself to stand-by mode (Optional). To switch on the TV from stand-by mode either: Press a digit button on the remote control so that a channel number is selected, or press the P/CH- or P/CH+ button on the TV or press the P/CH+ or P/CH- button on the remote control, so that last mode switched off is selected. By either method the TV will switch on. To Switch the TV Off Press the (stand-by) button on the remote control or stand-by button on the TV, so the TV will switch to stand-by mode. To power down the TV completely, unplug the power cord from the mains socket.

Initial Settings

When the TV set is operated for the first time, the IDTV turns on first. Because this is the first time that IDTV has been used, there are no channels stored in the memory. When the TV is turned on for the first time, the menu for the language selection appears on the screen. The message Welcome please select your language! is displayed in all language options sequentially in the OSD. By pressing the or buttons highlight the language you want to set and press OK button. In the dialog box Set Language is displayed next to OK item to indicate that Press SELECT button to set the highlighted language option. You can get information about the menu usage by pressing button. Press button again to exit the help menu. After then, First time installation OSD will appear on the screen. By pressing or buttons, select the country you want to set and press OK button.
English - 10 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 10

Avvrvhyyhv

Trphqpvrvhyyhv

&]HFK

After the First time installation is made, the following message appears on the screen:

9hhhhvprhpu4

<HV
To start automatic search, select Yes, to cancel select No. To select the "Yes" or "No" option, highlight the item by using or buttons and press OK button. The IDTV will automatically tune to the UHF transmission channels 21 to 68, searching for digital terrestrial TV broadcasts and displaying the names of channels found. This process will take about five minutes. To cancel searching, you can press M button at any time during the process.

6hvpTrhpu

UrtvXr@r
Set Language item by pressing or button. Press or button to highlight Country item and then use or to set. Afterwards, by pressing or button, highlight Txt. region and use or to set. When finished, press OK button to continue:

8qrp#)" 8qrp %)(

@rGpxFr

!778UXP9vr8h8yvssqUur7vtSrq9t $svrUur8uh9h8rrx $ADW@Uur8uh9h8rrx

Ihvthr

Tpurqyr
In the EPG Menu all channels are displayed. The current channel is highlighted when you enter the EPG menu. Use or buttons to change the channel. Also press RED or GREEN buttons to scroll up/ down the pages for the channels. Press OK button to watch the highlighted channel. If you highlight an event, short event description, extended event description, start and end time of the event are displayed on the screen. If you press OK button when a next event is highlighted, a reminder is set for the highlighted programme and a clock icon appears across the highlighted channel line as shown in the following EPG menu figure. Programme reminders is set to signal that a programme is about to start when you are watching another channel. If you set reminder for a programme, then you will be asked for
Electronic Programme Guide (EPG) Some, but not all, channels send information about the current and next events. Please note
English - 12 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 12
switching to that channel when the reminder time is due.

@yrpvpQthrBvqrXrq"

&()

"

selection OSD will be displayed on the screen. You can set Subtitles as ON or OFF. For Subtitle Language options, refer to Language Settings in the Configuration Menu section. Teletext Use of teletext and its functions are identical to the analogue text system. Please do refer to the Analogue teletext explanations.

IDTV Menu System

The IDTV Menu can only be shown when watching Digital terrestrial broadcasting. Press the 79 '79 button to turn the IDTV on while TV is in the analogue mode. 1. Press MENU button. The menu below appears on the screen:

1DYLJDWH

6FKHGXOH

5HPLQGHU

When you press the BLUE button you can view the extended schedule of the programmes. By pressing the button you can see the detailed help information easily. By pressing button again you can exit help menu. By pressing the BLUE button, the following EPG Menu appears on the screen.

@yrpvpQthrBvqr

778PI@ 778PI@ !778UXP $Avr &7788uvpr 9DT8PW@S` $778I@XT!# &778v UV@! #!)!!)

Xrq! # ) !

0DLQ 0HQX

8uhryGv Dhyyhv

8svthv

IDshv6hvyhiyr

8Drshpr

Channel List

Ihvthr 8uhtrUvr 6qhpr9h
By pressing YELLOW/BLUE button, you can advance the schedule of a day backwards/ forwards. By pressing / schedule time. buttons you can change the

Using or buttons on the remote control in Main menu, make sure that the first item, Channel List, is highlighted and press the OK button to display the Channel List. The following operations can be performed in this menu: 1. Navigating the entire list of channels 2. Moving channels * 3. Deleting channels 4. Renaming channels 5. Adding locks to channels 6. Setting favourites Channel List is the place where the channels are managed.
If you press button you can see the detailed help information easily. By pressing button again you can exit Help menu. Displaying the Subtitles With digital terrestrial broadcasting (DVB-T), some programmes are broadcast with subtitles. Subtitles can be displayed when watching these programmes. Whenever GREEN button is pressed, Subtitle
English - 13 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 13
* Depending on your country selection in the first time installation, MOVE option of the Channel List may not be visible.
Use or buttons to select the new position of the channel and press OK button to place the channel to the selected position and return the menu. Deleting the channels in the channel list Press or buttons to select the channel that will be deleted. Press or buttons to select the Delete item on Channel List menu. As seen on Channel List menu, Delete is displayed next to OK item at the bottom of the screen to indicate that you can press OK button to delete the highlighted channel in the channel list.

8C6 II@GGDTU

778PI@ !778UXP "DUW' #8uhry# $778UCS@@ %U ryrr &778APVS 'TxUhry (VFCv SUG 77 8PI@
@qvIh r GpxAhvr Tryrp 9ryrr

ApvTryrp8uhryXhpuHr L

6(/(&7
Navigating the entire channel list or keys for selecting the previous Press or next channel. You can press or or page down. buttons to move page up

8C6II@GGDTU

778PI@ !778UXP "DUW' #8uhry# $778UCS@@ %Uryrr &778APVS 'TxUhry (VFCv SUG 778PI@
To watch a specific channel, highlight it using or buttons and then press OK button, while the Select item on Channel List menu is highlighted via or buttons. Moving the channels in the channel list Press or buttons to select the channel that will be moved. Press or buttons to select the Move item on Channel List menu. Move is displayed next to OK item to indicate that you can press OK to move the highlighted channel to the desired position on the channel list.

Tryrp9ryrr@qvIhrGpxAhvr

6(/(&7 ApvTryrp8uhry9ryrrHr L
Press OK button to delete the highlighted channel in the channel list. Then the message below appears on the screen.
Uurryrprqrvprvyyirrhryqryrrqhq shvryvvyyirrqss6rr4 `r I

Press option.

buttons to highlight the desired
If OK button is pressed while Yes is highlighted, the highlighted channel will be deleted. Selecting No cancels the deletion. Renaming channels To rename a specific channel, the channel must be highlighted by pressing or buttons. Then highlight the Edit Name item by pressing or buttons. Press OK button to activate rename feature.

If Yes is selected, Automatic Search is started. Selecting No cancels Automatic Search. After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen.

9hrhpus hhytrpuhry4 `r I

Hint: Pressing button can help you for displaying information in IDTV. Installation The Installation menu is mainly intended to help you for creating a Channel Table in most efficient way.
Highlight Yes and press OK button to search for analogue channels. The following menu appears on the screen for analogue channel search.
English - 16 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 16
services may not appear with the correct channel number. This is because some broadcasters have no channel number information. Manual Search: In Manual Search, the number of the multiplex is entered manually and only that multiplex is searched for the channels. For every valid channel number, signal level, signal quality and network name are shown at the bottom of the screen.
By pressing or button, adjust the Language item. Press or button to highlight Country item and then use or to set. Afterwards, by pressing or button, highlight Txt. region and use or to set. When finished, press OK button to continue:
In both manual and auto search any existing channel in the database is not re-stored to avoid redundant duplicates of that channel. First Time Installation The user can use this item to load default settings, which were loaded to the receiver at the factory. To install factory settings, highlight First Time Installation menu item and press OK button, then you will be asked whether or not to delete the settings. Selecting Yes by pressing OK button while the Yes is highlighted will delete the existing channel table.
6rrhqryrrhyypuhryhq rvtssvvrvhyyhv4
After factory settings are loaded, First Time Installation menu will be displayed. The menu which is displayed for language selection appears on the screen at first. By using or buttons, select the desired language option, and press OK button to activate. After the language is selected, a message asking for automatic search appears on the screen.

9hhhhvprhpu4 `r I

After APS is finalized, the programme table will appear on the screen. In the programme table you will see the programme numbers and names assigned to the programmes. If you do not accept the locations and / or the programme names, you can change them in aps sub-menu in the settings menu. All the services are searched and a channel table is created automatically.

English - 19 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 19
Press OK and Time Settings sub menu will be displayed on the screen:

8rUvr UvrarTrvt Uvrar

#)!% 6 BHU
No new software was found appears on the screen if no new software is found. Timers Display the main menu by pressing the M button. Highlight the Timers line by pressing or buttons and press OK button to display the Timer menu.
Use or buttons to highlight the Time Zone Setting. Time Zone Setting is set using or buttons. It can be set to AUTO or MANUAL. When AUTO is selected, Current Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone Setting, Time Zone can be altered: By pressing or buttons select Time Zone. Use or buttons to change the Time Zone between GMT-12 or GMT+12. Current Time on the top of the menu list will then change according to the selected Time Zone. Receiver Upgrade The IDTV can be upgraded via the configuration menu, entered from the main menu.
Ah vrH qr Pss 8uhryGv U Py
Up to five separate timer events can be set and each is displayed in the Programme Timers screen, showing the event number, the channel to be selected, the start time, end time, date and the mode - whether that event is active (and will be acted on) or not.

QthrUvr

I8uhryIhrTh@q9hrHqr

DUW !)! )

!$!$6pvr !$Dhpvr

!778PI@))

"778PI@)) !$Dhpvr
#778PI@)) $778PI@)) %778PI@))

!$Dhpvr !$Dhpvr !$Dhpvr

TrhpusVthqr

)#! #&!$

0RYH&KDQJH
In the configuration menu, highlight the Receiver Upgrade item by pressing or buttons and press OK button to start upgrade process. The following menu appears on the screen.

TshrVthqr

0(18 @ v

@qvUvr

To set an event, highlight its mode button using or buttons and press OK button to display the timer entry window.
Ur) Ihr) Th) @q) 9hr) UW "DUW ) ) "%!$ Ppr
TrhpuvtsthqrQyrhrhvr H@IVphpry

TrhpuQtr)

After the search progress is completed, the message Completed searching for upgrade.
Here, the six settings consisting of the channel type, channel name, start time, end time, date and frequency mode can be set. You can move freely between each setting using or English - 20 -
A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 20
buttons. The channel type is set using or buttons. It enables displaying the channels only with the selected type. The channel name is set using or buttons to display the channel which broadcasts the programme. The start time, end time and date are each set with the numeric buttons on the remote control in 24-hour format. The frequency mode determines how often the receiver operates this event and is set with the or buttons to be either Once, Daily, or Weekly.

English - 23 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 23

Install Menu

Channel Select Channel by pressing a or b button. Use _ / ` buttons to change the channel number. You can also enter a number using the numeric buttons on the remote control. Standard Select Standard by pressing a or b button. Use _ / ` button to change the standard to B/G, D/K, I or L/L'. Colour System Select Colour System by pressing a or b button.
Programming Select Programming by pressing a or b button. After pressing ` button, programming menu appears on the screen:
Use _ / ` button to change the colour system to PAL, SECAM or AUTO. Search Select Search by pressing a or b button. Press _ / ` button to start search. The search will stop when a signal is found. Note: If you press the buttons with one-step moves, a frequency of 0.25 MHz will be advanced. However if you press the buttons all at once, it will advance automatically. To stop searching at a certain time, you may press a or b buttons. VCR Mode Select VCR Mode by pressing a or b button. Use _ / ` buttons to set VCR Mode On or Off. Hint: If you want to watch a DVD , then you have to set this item as Off. Decoder
Programme Select Programme by pressing a or b button. By pressing _ / ` button, you can select the program number. You can also enter a number using the numeric buttons on the remote control. There are 100 program storage between 0 and 99. Band Select Band by pressing a or b button.
You can use this mode to connect any decoder to your TV. Select Decoder by pressing a or b button. Press the _ / ` buttons to turn it ON or OFF. When you switch the decoder setting to OFF, EXT1 output will be muted. In this case, EXT1 output will not be available to display video. If it is switched ON, the EXT-1 output will be the selected video source. Any decoder can be connected to EXT1 to unscramble required video signal.
By pressing _ / ` button, you can change the channel type to C or S. English - 24 -
A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 24

Hint: Decoder setting should be stored separately for each programme.
Store Select Store by pressing a or b button. Press ` or OK button to store the settings. Stored will be displayed on the screen. A.P.S. Select A.P.S. by pressing a or b button. Press ` button to enter the A.P.S. menu. A.P.S. menu appears on the screen:
Whenever you press the TV/DTV button, A.P.S. function stops and Channel table appears on the screen. If you wait until the end of the process, program table is displayed with the programmes found and located. Teletext Region Select Teletext Region by pressing a or b button. Using _ / ` buttons in the Install menu, select your Teletext region. There are five options to select : West Europe, East Europe, Turk/Gre, Cyrillic and Arabic/Hebrew. Program Table

Q QthUhiyr

Q 778 Q Q Q Q Q Q Q Q Q ! " # $ % & ' (
Q!8# Q" Q# Q$ Q% Q& Q' Q(
A.P.S. (Auto Programming System) Country Press _ / ` button to select your country. If you want to exit from A.P.S. function, press the TV/ DTV button. For going back, press MENU. When you press OK button for starting APS, all stored programs will be erased and the following screen will be displayed.

'HOHWH 1DPH

0RYH $3 6
By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except for the AV mode). By cursor action, programme selection is performed automatically. Name To change the name of a programme, select the programme and press the YELLOW button.
The first letter of the selected name will be highlighted. Press a or b button to change that letter and _ / ` button to select the other letters. By pressing the YELLOW button, you can store the name. English - 25 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 25
Move Select the programme that you want to insert by navigation buttons. Press the GREEN button. By navigation buttons, move the selected programme to the decided programme space and press the GREEN button again. Delete To delete a programme, press the RED button. Pressing the RED button again erases the selected programme from the programme list, and the following programmes shift one line up. APS (Auto Programming System) When you press the BLUE button for APS, Auto Programming System menu will appear on the screen. Favourite Mode You can set various channels as favourites so that only the favourites are navigated. To set a favourite, use navigation buttons to select a channel and then press the item. The channel selected as a favourite appears in the Program Table with a favourites icon ( ) against the channel name. Carry out the same operation to remove a favourite. Press MENU to exit. Install Menu in AV Modes The following screen appears in the install menu:

Colour System Select Colour System by pressing a or b button. By pressing _ / ` button, you can change the colour system to PAL, SECAM or AUTO. Note: Other settings are identical with the ones described in Install Menu.

Other Features

TV Status Programme Number, Programme Name, Sound Indicator and Zoom Mode are displayed on the screen when a new programme is entered. Mute Indicator It is displayed in the upper side of the screen when enabled.
To cancel mute, there are two alternatives; the first one is pressing the button and the second one is increasing/decreasing the volume level. AV Modes By pressing the AV/SOURCE button you can switch your TV to AV modes (except for being in teletext). Pressing this button consecutively will switch the TV in one of the optional AV modes: TV, EXT1, EXT2 or DTV. To remove source OSD from screen press TV/DTV or MENU button.

,167$//

Qthvt USrtv Xr@r
6285&( 79 (;7 (;7 '79

7hpx)Hr

352*5$00,1*
8yTr W8SHqr Tr 7hpx)Hr @v)UW Q 6G Pss
English - 26 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 26
Menu System in AV Modes Sound/Picture/Features/Install Menu The items in these menus are described at Sound, Picture, Features and Install Menu explained in Menu System. Personal Preference By pressing PP button, you may adopt the previous settings that you had stored before.
P/CH+ / P/CH- and numbers (0-9) Press to select a page. Note: Most TV stations use code 100 for their index pages. Coloured Buttons (RED / GREEN / YELLOW / BLUE) Your TV supports both FASTEXT and TOP text systems. When these systems are available, the pages are divided into groups or topics. When FASTEXT system is available, sections in a teletext page will become colour-coded and can be selected by pressing the coloured buttons. Press a coloured button that corresponds to your needs. The coloured writings will appear, showing you which coloured buttons to use when TOP text transmission is present. Pressing P/CH- or P/CH+ commands will request the next or previous page respectively.

Remote Control Your TV no longer responds to the remote control. Perhaps the batteries are exhausted. If so you can still use the local buttons at the bottom of the TV.
English - 30 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 30

Specifications

DISPLAY Size/Diagonal Viewable size / Diagonal VIDEO STANDARDS Video TV Tuner (Analog) 15" (4:3 Display) 30.42 x 22.81 (cm) / 38.1 (cm) PAL/NTSC/SECAM PAL/SECAM/B/G/D/K K'I/I' L/L' VHF (BAND I/II) UHF (BAND U) HYPERBAND CABLE TV (S1-S20 / S21-S41) 100 PRESET CHANNELS MHEG-5 ENGINE compliant with ISO/IEC 13522-5 Ukengine Profile 1 Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile Frequency range: 474-850 MHz Transmission standard: DVB-T, MPEG-2 FEC: all DVB modes Video: MP@ML, PAL, 4:3/16:9 Audio: MPEG Layer I&II 32/44.148KHz Auto, 4:3, Wide German + Nicam Stereo TV Tuner: IEC 75 Ohm Input Resistance SCART: CVBS, RGB CVBS: 1 x RCA CVBS: Audio Phono L/R

TV Tuner (Digital)

Formats AUDIO INPUT CONNECTIONS Video
Audio OUTPUT CONNECTIONS Audio Audio Speaker Output OPERATOR CONTROL KEYS OPERATING CONDITIONS Temperature Air Humidity Atmospheric Pressure POWER SUPPLY Voltage Supply Mains Frequency Power Consumption DIMENSIONS AND WEIGHT Display with stand D x L x H Display without stand: D x L x H Weight Display Weight Stand Weight (net)
Line Out: Phono L/R Headphones: 3.5mm Jack L/R 2 x 2W (RMS) (10% THD) TV/AV, MENU, P/CH +, P/CH -, VOL +, VOL -, STANDBY.
0 ~ 40C (in-oparation) 20% ~ 80% (no condensation) 800 ~ 1114 Hpa
220-240VAC 50Hz 45W (Max), 1W Standby 178 x 397 x 370 (mm) 79 x 397 x 343 (mm) 3.9 kg 0.4 kg 4.3 kg
English - 31 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 31

Pin Specifications

SCART connector pin specifications
Qv Dvthy 6V9DPPVUSDBCU ! " # $ % & ' ( 6V9DPDISDBCU 6V9DPPVUG@AUHPIP 6V9DPBI9 SB77BI9 6V9DPDIG@AUHPIP SB77DI 6V9DPSB7TXDU8C SB7BBI9 Irq SB7BDI %)( Qv ! " # $ % & ' ( ! ! Dvthy Irq SB7SBI9 BI9 SB7STWCT8CSPHDI6I8@DI 7G6IFDIBTDBI6G 8PHQPTDU@WD9@PBI9 7G6IFDIBTDBI6GBI9 8PHQPTDU@WD9@PPVU 8PHQPTDU@WD9@PTWCTGVHDI6I8@DI BI9TCD@G98C6TTDT
English - 32 A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50 32
Hitachi Ltd. Consumer Business Group
Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan

Italiano - 135 A04-ITA-15LD2550EB-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-C2-10052174-50112161.p6510:27.07.2007,
Hitachi Ltd. Consumer Business Group
Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan
HITACHI EUROPE LTD. Consumer Affairs Department PO Box 3007 Maidenhead Berkshire SL6 8ZE UNITED KINGDOM Tel: 4405 Email: consumer.mail@hitachi-eu.com HITACHI EUROPE S.A. 364, Kifissias Ave. & 1, Delfon Str. Chalandri Athens GREECE Tel: Fax: Email: dmgservice.gr@hitachi-eu.com
HITACHI EUROPE GmbH Munich Office Dornacher Strasse 3 D-85622 Feldkirchen bei Mnchen GERMANY Tel: 089-- 0 Fax: 089 - - 224 Hotline: 0180 - 51 (12ct/min.) Email: dmg-mun.service@hitachi-eu.com
HITACHI EUROPE S.A. Gran Via Carles III, 86 Planta 5 Edificios Trade - Torre Este 08028 Barcelona
Tel: 2550 Fax: 3513 Email: atencion.cliente@hitachi-eu.com
HITACHI EUROPE S.r.l. Via T. Gulli, MILANO ITALY Servizio Clienti Tel. Email: customerservice.italy@hitachi-eu.com
HITACHI EUROPE S.A.S Digital Media Group Cit Internationale
HITACHI EUROPE AB Box 77 S-KISTA SWEDEN Tel: Fax: Email: csgswe@hitachi-eu.com
94 Quai Charles de Gaulle,

69463 LYON cedex 06

FRANCE
Tel: 70 Fax: 99 Email: france.consommateur@hitachi-eu.com
HITACHI EUROPE AB (Norway Branch Nuf) Strandveien Lysaker NORWAY Tel: 67519030 Fax: 67519032 Email: csgnor@hitachi-eu.com
HITACHI EUROPE LTD. Benelux Branche Office Bergensesteenweg Sint-Pieters-Leeuw BELGIUM Tel: 0032/Fax: 0032/Email: info@hitachi.be HITACHI EUROPE LTD. Kodanska 00 Praha 10 CZECH REPUBLIC Tel: 514 Fax: 513 Email: dmg.eeu@hitachi-eu.com
HITACHI EUROPE AB Egebkvej Nrum DENMARK Tel: Fax: Email: csgden@hitachi-eu.com
HITACHI EUROPE AB Lars Sonckin kaari 16 FIN-02600 ESPOO FINLAND Tel: 010-8503085 Fax: 010-8503086 E-mail: info.finland@hitachi-eu.com
www.hitachidigitalmedia.com