Instructions for use Bedienungsanleitung

GB D F I E

26LD6200 32LD6200
Notice d'utilisation Istruzioni per l'uso Manual de Instrucciones

Contents

Remote Control Buttons.. 2 TFT TV.. 3 Installation Of The TFT TV To The Wall 5 Preparation.. 7 Features.. 7 Panel Features. 7 Safety Precautions.. 7 Before Switching On Your TV. 10 Power Connection.. 10 Connections To The Aerial Input Socket.. 10 How To Connect Other Devices. 10 Inserting Batteries In The Remote Control Handset.. 10 Switching The TV ON/OFF.. 10 To switch the TV on:.. 10 To switch the TV off:.. 10 Operating The TV.. 11 Initial APS (Automatic Programming System)... 11 Operating with the buttons on the TV set.. 11 Operating With Remote Control. 11 picture menu.. 12 When VGA Or DVI Is Connected To TV:.. 13 window menu.. 13 When VGA Or DVI Is Connected To TV:.. 14 audio menu.. 14 options menu.. 15 settings menu. 16 aps menu.. 16 program table.. 16 programming menu.. 18 source select.. 19 Other Features.. 19 TV Status.. 19 Freeze Picture. 20 Sound Indicator.. 20 Mute Indicator.. 20 AV Modes.. 20 Teletext.. 20 To Operate Teletext.. 20 To Select A Page Of Teletext.. 21 To Select Index Page.. 21 To Select Teletext With A TV P rogramme.. 21 To Select Double Height Text. 21 To Reveal Concealed Information. 21 To Stop Automatic Page Change. 21 To Select A Subcode Page.. 21 To Exit Teletext. 21 To Display The Time. 21 Fastext.. 22 Connect Peripheral Equipment. 22 Via The Euroconnector.. 22 Via Aerial Input. 22 Decoder... 22 TV And Video Recorder.. 23 Playback NTSC.. 23 Copy Facility.. 23 Search For And Store The Test Signal Of The Video Recorder. 23 Camera And Camcorder.. 23 Connect The Decoder To The Video Recorder.. 23 Connecting Headphones. 23 Aerial Connections. 24 Tips... 25 Care Of The Screen.. 25 Poor Picture.. 25 No Picture.. 25 Sound.. 25 Remote Control.. 25 Specifications.. 26
-101-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45

Remote Control Buttons

= Stand By = Cursor Up = Cursor Right OK = Okay / Freeze 0 - 9 = Direct Program = Image size SWAP = Not used on this model P/CH + = Programme Up + = Volume Up = TV / Quit Menu SOURCE = Source select YELLOW BLUE = Hold = Update = Index Page = Reveal = Expand = Mix = Teletext = Time / Subpage RED GREEN = Mute I-II = Mono/Stereo - Dual A-B = Volume Down =Previous Programme = Info (Program Table) M = Menu - P/CH = Programme Down

6285&(

= Cursor Down = Cursor Left
-201-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45

TFT TV

FRONT VIEW

REAR VIEW

T U6I 97`

U W 6W

WP GV H@

3RZHU FRUG LQSXW

2Q2II VZLWFK
-301-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
Headphone Audio Input (Left, Right) Video Input S-VHS Input STAND BY button TV/AV button MENU button Program Up, Program Down buttons Volume Up, Volume Down buttons Power cord input On/Off switch Antenna Audio Line Out L, R Scart 1 Full Scart Scart 2 Audio In (for VGA and DVI source) DVI Input VGA Input

TU6I97`

WPGVH@

TU 6I9 ` UW W 7 6

W PGVH @

!!W!#W 68$C

Q86V9DP

Q8DIQVU

-401-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
Installation Of The TFT TV To The Wall
1- To install the TFT TV on the wall, first of all, foot assembly should be removed. (Figure 1). Unscrew the 4 screws (M4 x 6) that attach the foot assembly to the TFT panel and remove the foot assembly from the TFT panel. 2- Place the 4 plastic pins to the circular screw holes at the rear of the TFT and screw them to the TFT panel with 4 (M6 x 20) screws. 3- Install the wall hanger as in figure 2 to the wall with 4 anchors (M7 x 30) and 4 screws (M4 x 30). Decide the place on the wall where the TFT panel would be placed. Level and mark with a pencil the 4 mounting points on the wall hanger. Drill pilot holes for the plastic anchors and then fix the wall hanger with 4 screws (M4 x 30). 4- Raise the TFT panel and hang it to the holes on the wall hanger from the 4 hanging screws at the rear of the TFT panel.

7)7 3$1(/

6&5(: +2/(6 )25 3/$67,& 3,16

6&5(:;

)227 $66(0%/<

),*85(

-501-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
7)7 3$1(/ 6&5(: +2/(6 )25 3/$67,& 3,16 6&5(:[ 6&5(: 0 [ 3/$67,& $1&+[

01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 6
3/$67,& 3,16 :$// +$1*(5

:$// +$1*(5

27.12.2004, 08:45

Preparation

For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in tropical and/or moderate climates.
PLL (Channel Search) PC input (Support Up to WXGA 1280 x 768) 1 SVHS Input and 1 RCA AV Input are available. Headphone output. Stereo PC Audio Input Plug&Play for Windows 9X, ME, 2000, XP 4H Comb Filter Audio Line Out

Features

It is a remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system. It has 2 Euroconnector sockets for external devices (such as video, video games, audio set, etc.) Stereo sound system (German+Nicam). Full function Teletext. Fastext (10 Pages), TOP text. It is possible to connect headphone. Direct channel access. A.P.S. (Automatic Programming System). All programmes can be named. Programme swapping between last watched two programmes. Forward or backward automatic tuning. Sleep timer. Automatic sound mute when no transmission. Fill all (16:9), zoom, letterbox, subtitles, normal (4:3), 14:9, Auto switch WSS (Wide Screen Signaling). NTSC Playback. Front SVHS is available. Front AV in is available. It has VGA and DVI connector for external devices such as computer. AVL (Automatic Volume Limiting) When no valid signal is detected, after 5 minutes the TV switches itself automatically to stand-by mode. -701-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 7

Panel Features

High resolution, 26-inch TFT LCD display. WXGA resolution (1280 x 768) Contrast ratio (500:1 typical) Brightness (typical) 450 cd/m2. Response time (typical) 16 msec. Viewing angle (typical) 176 (horizontal) and 176 (vertical). Display colour 16.7 Million.

Safety Precautions

IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV

Dos and Donts

This Television has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO consult your dealer if you are in any doubt about installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. This TV is supplied with a fitted mains plug. This plug must not be cut off as it may contain a special radio interference filter, the removal

of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate safety approved extension lead or consult your dealer. Observe the manufacturers instructions when connecting extension leads to the TV. Check the fuse rating on the new plug, this should be fitted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1 362) approvals, these are easily identifiable by either the or symbols. If you are in any doubt about the installation of an extension lead, please consult a competent electrician.

ABOVE ALL

NEVER let anyone, especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electric shock. NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry!

1. Power Source

The receiver should be operated only from a 220-240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting for your convenience.
DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DONT place water filled vessels on top of T.V. cabinets. DONT remove any fixed cover as this may expose dangerous voltages. DONT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. DONT use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving. DONT obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. DONT use makeshift stands and NEVER fix legs or stands to the TV with any screws other than those provided - to ensure complete safety always use the manufacturers approved stand with the fixings provided. DONT allow electrical equipment to be exposed to rain or moisture. -801-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 8

2. Power Cord

The power supply cord should be placed so that it is not likely to be walked on or pinched by items placed upon them or against it. Pay particular attention to cord where it enters the plug, power outlet, and the point where it exits from the receiver.

3. Moisture and Water

Do not use this equipment in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this equipment to rain or water, as this may be dangerous and do not place objects filled with liquids on top. Avoid from dripping or splashing.

4. Cleaning

Before cleaning, unplug the receiver from the main supply, outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.

5. Ventilation

The slots and openings on the receiver are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.

6. Lightning

In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.

7. Replacement Part

When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorised substitutions may result in fire, electrical shock, or other hazards.

8. Servicing

Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock.

9. Naked Flame Sources

Do not place naked flame sources on the apparatus. WARNING: When the device is not in use for a long time, disconnect from power. Instructions for waste disposal: Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children. Battery, including those which is heavy metal-free, should not be disposed of with household waste. Please dispose of used battery in an environmentally sound manner. Find out about the legal regulations which apply in your area. Cold cathode fluoresant lamp in LCD PANEL contains a small amount of mercury, please follow local ordinates or regulations for disposal. "The LCD panel is very high technology product with about a million thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product."
DO NOT LEAVE YOUR TV AT STAND-BY OR OPERATING WHEN YOU LEAVE YOUR HOUSE
-901-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
Before Switching On Your TV

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.
batteries inside. Replace the battery cover.

Connections To The Aerial Input Socket
NOTE: Remove batteries from remote control handset when it is not to be used for a long period.Otherwise it can be damaged due to any leakage of batteries.

Switching The TV ON/OFF

867G@UW

To switch the TV on:

Your TV will switch on in two steps: 1- Connect the power supply cord to the system. Press On/Off switch at the rear of the TV. Then the TV switches itself to stand-by mode and the led becomes red located on the front of the TV. 2- To switch on the TV from stand-by mode either: Press a digit button on the remote control so that a programme number is selected, or, Press , "-P/CH" or "P/CH+" button at the top of the TV or press -P/CH or P/CH+ button on the remote control, so that last switched off mode is selected. By either ways the TV will switch on and the led becomes green.

9+)8+)

S@6SPAUC@UW
Connect the aerial or cable TV plug to the Aerial socket located at the back of the TV. If you are also connecting a VCR, plug the aerial cable into the aerial input socket on the VCR and then connect the RF output cable from the RF out socket on the VCR to the TV aerial socket. See P24 for further details.
How To Connect Other Devices
IMPORTANT: Switch off the TV before connecting any external device. Sockets for external connections are at the back and side of the TV. For connection of other devices via Euroconnector refer to the manuals of the related devices.
Inserting Batteries In The Remote Control Handset
Place the batteries in the right directions as seen below. Remove the battery cover located on the back of the handset by gently pulling upwards from the indicated part. Insert two MN2400 AAA or equivalent type

To switch the TV off:

Press the stand-by button on the remote control, so the TV will switch to stand-by mode and the GREEN LED will become RED, or, Press the button located on the top of the TV, so the TV will switch off and the GREEN LED will become RED.
- 10 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
To power down the TV completely, press On/Off switch, or unplug the power cord from the mains socket.
settings menu. (See page 17 for Program table explanation.)
Operating with the buttons on the TV set
Volume setting and programme selection can be made by using the buttons at the control panel on the top of the TV. Volume Setting Press "VOLUME -" button to decrease volume or "VOLUME +" button to increase volume, so a volume level scale (slider) will be displayed at the middle of the bottom on the screen.

qqr r !C #! " & '"
image size By pressing / button, select image size. "right/left to change image size" is seen on the screen. By pressing / button, you can change image size to fill all, fill 1:1 and fill aspect.

audio menu

By pressing / button, select the third icon. Audio menu appears on the screen.
ihyhpr rhyvr 6WG vqrq qhvp ih

qshqvhqwr

volume By pressing / button, select volume. "right/left to adjust volume" is seen on the screen. Press button to increase volume level. Press button to decrease volume level. Volume level can be adjusted between 0 and 54. headphone volume By pressing / button, select hp volume. "right/left to adjust hp volume" is seen on the screen. Press button to increase hp volume level. Press button to decrease hp volume level. Hp volume
AVL By pressing / button, select AVL. "right/left for AVL on/off" is seen on the screen. By pressing / button set to AVL on to activate it or off to deactivate it.
- 14 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
wide sound It is used to gain saloon effect to the sound. By pressing / button, select wide sound. "right/left for wide sound off/stereo/ mono" is seen on the screen. By pressing / button set to wide sound on to activate it or off to deactivate it. dynamic bass Dynamic Bass is used to increase bass effect of the TV set. By pressing / button, select dynamic bass. "right/left for dynamic bass on/off" is seen on the screen. By pressing / button set to dynamic bass on to activate it or off to deactivate it.

yhthtr p v

rtyvu ss

r ihpxtq puvyqypx ph!

hypr Tph ss

yrrvr yrrvrrhvvt

"vr

qshvrv

osd timeout By pressing / button, select osd timeout. "right/left to change osd timeout" is seen on the screen. By pressing / button, you can change osd timeout to 5 sec, 15 sec or 60 sec. menu background By pressing / button, select menu background. "right to change menu background" is seen on the screen. You can change menu background to translucent or opaque by pressing button. child lock You can use this feature to prevent children turning on TV or changing programs or adjustments etc. without remote control. By pressing / button, select child lock. "right/left to change" is seen on the screen. The child lock feature can be set by or button to either on or off. When off is selected, there will be no difference in the operation of your TV. When on is selected, the TV can only be controlled by the remote control handset. scart 2 out By pressing / button, select scart 2 out. "right/left to select scart 2 out" is seen on the screen. You can set scart 2 out to Scart 1, Tuner or FAV by pressing / button.

options menu

By pressing / button, select the fourth icon. Options menu appears on the screen.
yhthtr qvr rihpxtq puvyqypx ph!

rtyvu $rp $rp %rp

"vr !(vr

yrrvrrhvvt

language By pressing / button, select language. "right/left to change language" is seen on the screen. By pressing / button, you can select the language. vcr This item is displayed only when TV is in AV mode. By pressing / button, select vcr. "right/left to change vcr status" is seen on the screen. By pressing / button set vcr to on or off.
- 15 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
sleep timer By pressing / button, select sleep timer. "adjust sleeptimer" is seen on the screen. You can set the sleep time to Off, 15, 30, 60, 90 or 120 minutes by pressing / button. The sleep timer is used to turn the TV off after a pre-defined period. sleep time remaining Selected and remaining sleep time is displayed at this area. Sleep time remaining item can not be selected by / button.

th xvr

$ ' 7B 8

puhryr

rqvyhiry

hhyrhpu

qthvtv

settings menu

By pressing / button, select the fifth icon. Settings menu appears on the screen.

aps menu

By pressing / button in tv tuner menu select the second icon. aps menu appears on the screen.

prryrp

thhiyr

qshvrrvt

tv tuner By pressing / button, select tv tuner. "<ok> to activate tuner menu" is seen on the screen. By pressing / or OK button enter the menu. tv tuner menu has two sub-menu named as aps and programming.

qpuhtrhv

program table
By pressing / button, select program table. "right/left to enter program table" is seen on the screen. By pressing / or OK button, you can enter the following program table. Programme table is also entered directly by pressing button.
- 16 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
8II !S6D! "T6U #S6D" $UW$ %a9A &S6 '8! (T& 8$ 9ryrr ! " # $ % & ' ( ! Dr ! !! !" !# !$ !% !& !' !( " Ihr

6rrhqryrr4

0! 8hpry 2.! 9ryrr
Insert: Select the program which you want to insert by navigation buttons. Press GREEN button. By navigation buttons move the selected program to the decided programme space and press GREEN button again. Name: To change the name of a decided programme, that programme is selected and pressed to the YELLOW button. The following menu comes to screen.

Tph SB7

Tph!SB7

vturyrppr

In source select menu, come on one of the sources by pressing / button and select it by pressing button. The source types are tuner, Scart 1, Scart 1 RGB, Scart 2, Scart 2 RGB, PC, DVI, FAV and S-Video.
- 19 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45

Freeze Picture

You can freeze the picture on the screen by pressing OK button.

AV Modes

By pressing the SOURCE button or via source select menu, you can switch your TV to AV modes (except being in Teletext). Pressing this button will consecutively switch the TV in one of the optional AV modes: Tuner 1, Scart 1, Scart 1 RGB, Scart 2, Scart 2 RGB, PC, DVI, FAV and SVideo. If you wish the set to remember the Scart RGB setting for your devices (Set Top Box, Satellite receiver or DVD), select this option from the Source Select Menu rather than the SOURCE button. Once this option has been selected in the menu it will be automatically selected every time you turn the device on. While watching VCR; vcr item in options menu should be set to on. In order to quit the AV mode press the TV, digit buttons or -P/CH or P/CH+.

Sound Indicator

The alternatives of the indicator are Mono, Stereo, Dual A and Dual B. This indicator is displayed under the programme number indicator on the screen. "I-II" button is used to select Mono, Stereo, Dual A or Dual B.
In Mono broadcast or in forced-mono (for stereo broadcast).

67(5(2

In Stereo broadcast.

'8$/ $

If dual broadcast detected. Dual A is selected in default and also can be selected after Dual B by Remote Control.

'8$/ %

If Dual B selected by Remote Control.

Teletext

Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index). On screen display is not available in text mode. Contrast, brightness or colour control is not available, but volume control is available in text mode.

Mute Indicator

It is placed in the upper left side of the screen when enabled. To cancel mute, there are two alternatives, the first one is pressing " " button, thus the volume is set to the preceding value, and the second one is increasing/decreasing the volume level, thus it starts from the previous level to increase/decrease.

To Operate Teletext

Select a TV station on which Teletext is being transmitted. Press button. Usually the list of contents (index) is displayed on the screen.
- 20 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
To Select A Page Of Teletext
Press the appropriate digit buttons for the required Teletext page number. The selected page number is displayed at the top left corner of the screen. The Teletext page counter searches until the selected page number is located, so that the desired page is displayed on the screen.
To Reveal Concealed Information
Pressing button once will reveal answers on a quiz or games page. Pressing button again will conceal the revealed answers.
To Stop Automatic Page Change
The teletext page you have selected may contain more information than what is on the screen; the rest of the information will be displayed after a period of time. button to stop the automatic Press page change.
Press button again to allow the next page to be displayed.
Press P/CH + button to move the Teletext screen forward one page at a time. Press - P/CH button to move the Teletext screen backward one page at a time.

To Select A Subcode Page

Subcode pages are subsections of long Teletext pages that can only be displayed on the screen one section at a time. Select the required Teletext page. Press button. Select the required subcode page number by pressing four digit buttons (e.g. 0001). If the selected subcode page is not displayed button. TV in a short time, press programme will be displayed on the screen. Teletext page number will be displayed on the upper left corner of the screen when the selected page is found. Press button to display the selected Teletext page.

To Select Index Page

To select the page number of the index (generally page 100), press button.
To Select Teletext With A TV Programme
Press button. The text is now superimposed over the programme on the screen. button again to return to the Press Teletext page.
To Select Double Height Text
Press button for the top half of the information page to be displayed in double height text. Press button again for the bottom half of the information page to be displayed in double height text. Press button once more for the full page of normal height text.

To Exit Teletext

Press or 79 button. The screen will switch to TV mode.

Connect your camera or camcorder S-VHS input at the right side of the TV. Connect your equipment to the TV via S-VHS input and audio inputs of FAV inputs by using S-VHS cables.

Copy Facility

Source selection for VCR recording. Select options menu. Select scart 2 out source pressing / button. Select Scart 1 to copy the picture from tuner. Select Scart 2 to copy the picture from FAV or SCART 2.
Connect The Decoder To The Video Recorder
Some video recorders have a special euroconnector for decoder. Connect a eurocable to the euroconnector of your decoder and to the special euroconnector of your video recorder. See also the booklet of your video recorder. To connect your video recorder to the TV, see TV and Video Recorder section. If you want to connect more equipment to your TV, consult your dealer.
Search For And Store The Test Signal Of The Video Recorder
Unplug the aerial cable from the aerial socket ANT of your video recorder. Switch on your TV and put the video recorder on the test signal. (See the booklet for your video recorder.) Enter the tv tuner menu in settings menu. Enter the programming menu in tv tuner menu and select manual search.

Connecting Headphones

Use the stereo headphone socket at the right side of the TV, to connect headphones.
- 23 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45

Aerial Connections

2XWGRRU $HULDO &RQQHFWLRQV
VCA6rvhy Sq&$uphvhyphiyr

SrhsUW

WCAVCA6rvhy

Ayh"uvyrhqphiyr

Sq&$uphvhyphiyr

HEADPHONE AUDIO

6V9DPDI WD9@PDI

$17 ,1

&$0&25'(5

FOR SATELLITE RECEIVER

DECODER
- 24 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45

Care Of The Screen

Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.

You can not hear any sound. Did you perhaps interrupt the sound, pressing button? Are external speakers connected to the TV? Sound is coming from only one of the speakers. Is the balance set to one direction extreme? See audio menu.

Poor Picture

Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or Teletext unrecognisable? Check if you have entered the correct frequency. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.

Remote Control

Your TV no longer responds to the remote control. Press the 79 button on the remote control once more. Perhaps the batteries are exhausted. If so you can still use the local buttons on the top of the TV. Have you selected the wrong menu? Press 79 button to return to TV mode or press M button to return to the previous menu. No solution: Switch your TV set off and on. If this does not work, call the service personnel; never attempt to repair it yourself.

No Picture

Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer. No Picture means that your TV is not receiving any transmission. Have you pressed the correct buttons on the remote control? Try once more.
- 25 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45

Specifications

TV BROADCASTING PAL SECAM B/G D/K K I/I L/L RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20/ S21-S41) NUMBER OF PRESET CHANNELS CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz. AUDIO German+Nicam Stereo AUDIO OUTPUT POWER (WRMS.) (%10 THD) 2x8 POWER CONSUMPTION (W) (max.) 142 W < 3 W (Stand-by) PANEL 16:9 display, 26 Screen Size DIMENSIONS (mm)

',0(16,216 PP ' / +

Xrvtuxt
- 26 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
Hitachi, Ltd. International Sales Division 292 Yoshida-cho, Totsuka-ku, Yokohama, 244-0817, Japan HITACHI EUROPE LTD.
Digital Media Group Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA
UNITED KINGDOM Tel: Fax: Email: consumer-service@hitachi-eu.com
HITACHI EUROPE S.A. 364, Kifissias Ave. & 1, Delfon Str. Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835694 Email: service.hellas@hitachi-eu.com
HITACHI EUROPE GmbH Munich Office Dornacher Strasse 3 D-85622 Feldkirchen bei Mnchen GERMANY Tel: 089-991 80-0 Fax: 089 - -224 Hotline: 0180 - 51 (12ct/min.) Email: HSE-DUS.Service@Hitachi-eu.com
HITACHI EUROPE S.A. Gran Via Carles III, 86 Planta 5 Edificios Trade - Torre Este 08028 Barcelona
Tel: 2550 Fax: 3513 Email: atencion.cliente@hitachi-eu.com
HITACHI EUROPE SRL Via T. Gulli n.MILAN
Tel: Fax: Servizio Clienti Tel. Email: customerservice.italy@hitachi-eu.com
HITACHI EUROPE AB Box 77 S-KISTA SWEDEN Tel: Fax: Email: csgswe@hitachi-eu.com
HITACHI EUROPE S.A.S Lyon Office B.P. 45, 69671 Bron Cedex FRANCE Tel: 70 Fax: 99 Email: france.consommateur@hitachi-eu.com
HITACHI EUROPE LTD. Norwegian Branch Office Strandveien Dysaker NORWAY Tel: Fax: Email csgnor@hitachi-eu.com
HITACHI EUROPE LTD. Benelux Branche Office Bergensesteenweg Sint-Pieters-Leeuw BELGIUM TEL : 0032/FAX: 0032/Email : info@hitachi.be
www.hitachi-consumer-eu.com

50058455