Instructions for use Bedienungsanleitung

GB D F I E

26LD6200 32LD6200
Notice d'utilisation Istruzioni per l'uso Manual de Instrucciones

Contents

Remote Control Buttons.. 2 TFT TV.. 3 Installation Of The TFT TV To The Wall 5 Preparation.. 7 Features.. 7 Panel Features. 7 Safety Precautions.. 7 Before Switching On Your TV. 10 Power Connection.. 10 Connections To The Aerial Input Socket.. 10 How To Connect Other Devices. 10 Inserting Batteries In The Remote Control Handset.. 10 Switching The TV ON/OFF.. 10 To switch the TV on:.. 10 To switch the TV off:.. 10 Operating The TV.. 11 Initial APS (Automatic Programming System)... 11 Operating with the buttons on the TV set.. 11 Operating With Remote Control. 11 picture menu.. 12 When VGA Or DVI Is Connected To TV:.. 13 window menu.. 13 When VGA Or DVI Is Connected To TV:.. 14 audio menu.. 14 options menu.. 15 settings menu. 16 aps menu.. 16 program table.. 16 programming menu.. 18 source select.. 19 Other Features.. 19 TV Status.. 19 Freeze Picture. 20 Sound Indicator.. 20 Mute Indicator.. 20 AV Modes.. 20 Teletext.. 20 To Operate Teletext.. 20 To Select A Page Of Teletext.. 21 To Select Index Page.. 21 To Select Teletext With A TV P rogramme.. 21 To Select Double Height Text. 21 To Reveal Concealed Information. 21 To Stop Automatic Page Change. 21 To Select A Subcode Page.. 21 To Exit Teletext. 21 To Display The Time. 21 Fastext.. 22 Connect Peripheral Equipment. 22 Via The Euroconnector.. 22 Via Aerial Input. 22 Decoder... 22 TV And Video Recorder.. 23 Playback NTSC.. 23 Copy Facility.. 23 Search For And Store The Test Signal Of The Video Recorder. 23 Camera And Camcorder.. 23 Connect The Decoder To The Video Recorder.. 23 Connecting Headphones. 23 Aerial Connections. 24 Tips... 25 Care Of The Screen.. 25 Poor Picture.. 25 No Picture.. 25 Sound.. 25 Remote Control.. 25 Specifications.. 26
-101-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45

Remote Control Buttons

= Stand By = Cursor Up = Cursor Right OK = Okay / Freeze 0 - 9 = Direct Program = Image size SWAP = Not used on this model P/CH + = Programme Up + = Volume Up = TV / Quit Menu SOURCE = Source select YELLOW BLUE = Hold = Update = Index Page = Reveal = Expand = Mix = Teletext = Time / Subpage RED GREEN = Mute I-II = Mono/Stereo - Dual A-B = Volume Down =Previous Programme = Info (Program Table) M = Menu - P/CH = Programme Down

6285&(

= Cursor Down = Cursor Left
-201-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45

TFT TV

FRONT VIEW

REAR VIEW

T U6I 97`

U W 6W

WP GV H@

3RZHU FRUG LQSXW

2Q2II VZLWFK
-301-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
Headphone Audio Input (Left, Right) Video Input S-VHS Input STAND BY button TV/AV button MENU button Program Up, Program Down buttons Volume Up, Volume Down buttons Power cord input On/Off switch Antenna Audio Line Out L, R Scart 1 Full Scart Scart 2 Audio In (for VGA and DVI source) DVI Input VGA Input

TU6I97`

WPGVH@

TU 6I9 ` UW W 7 6

W PGVH @

!!W!#W 68$C

Q86V9DP

Q8DIQVU

-401-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
Installation Of The TFT TV To The Wall
1- To install the TFT TV on the wall, first of all, foot assembly should be removed. (Figure 1). Unscrew the 4 screws (M4 x 6) that attach the foot assembly to the TFT panel and remove the foot assembly from the TFT panel. 2- Place the 4 plastic pins to the circular screw holes at the rear of the TFT and screw them to the TFT panel with 4 (M6 x 20) screws. 3- Install the wall hanger as in figure 2 to the wall with 4 anchors (M7 x 30) and 4 screws (M4 x 30). Decide the place on the wall where the TFT panel would be placed. Level and mark with a pencil the 4 mounting points on the wall hanger. Drill pilot holes for the plastic anchors and then fix the wall hanger with 4 screws (M4 x 30). 4- Raise the TFT panel and hang it to the holes on the wall hanger from the 4 hanging screws at the rear of the TFT panel.

7)7 3$1(/

6&5(: +2/(6 )25 3/$67,& 3,16

6&5(:;

)227 $66(0%/<

),*85(

-501-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
7)7 3$1(/ 6&5(: +2/(6 )25 3/$67,& 3,16 6&5(:[ 6&5(: 0 [ 3/$67,& $1&+[
01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 6
3/$67,& 3,16 :$// +$1*(5

:$// +$1*(5

27.12.2004, 08:45

Preparation

For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in tropical and/or moderate climates.
PLL (Channel Search) PC input (Support Up to WXGA 1280 x 768) 1 SVHS Input and 1 RCA AV Input are available. Headphone output. Stereo PC Audio Input Plug&Play for Windows 9X, ME, 2000, XP 4H Comb Filter Audio Line Out

Features

It is a remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system. It has 2 Euroconnector sockets for external devices (such as video, video games, audio set, etc.) Stereo sound system (German+Nicam). Full function Teletext. Fastext (10 Pages), TOP text. It is possible to connect headphone. Direct channel access. A.P.S. (Automatic Programming System). All programmes can be named. Programme swapping between last watched two programmes. Forward or backward automatic tuning. Sleep timer. Automatic sound mute when no transmission. Fill all (16:9), zoom, letterbox, subtitles, normal (4:3), 14:9, Auto switch WSS (Wide Screen Signaling). NTSC Playback. Front SVHS is available. Front AV in is available. It has VGA and DVI connector for external devices such as computer. AVL (Automatic Volume Limiting) When no valid signal is detected, after 5 minutes the TV switches itself automatically to stand-by mode. -701-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 7

Panel Features

High resolution, 26-inch TFT LCD display. WXGA resolution (1280 x 768) Contrast ratio (500:1 typical) Brightness (typical) 450 cd/m2. Response time (typical) 16 msec. Viewing angle (typical) 176 (horizontal) and 176 (vertical). Display colour 16.7 Million.

Safety Precautions

IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV

Dos and Donts

This Television has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO consult your dealer if you are in any doubt about installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. This TV is supplied with a fitted mains plug. This plug must not be cut off as it may contain a special radio interference filter, the removal
of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate safety approved extension lead or consult your dealer. Observe the manufacturers instructions when connecting extension leads to the TV. Check the fuse rating on the new plug, this should be fitted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1 362) approvals, these are easily identifiable by either the or symbols. If you are in any doubt about the installation of an extension lead, please consult a competent electrician.

ABOVE ALL

NEVER let anyone, especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electric shock. NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry!

1. Power Source

The receiver should be operated only from a 220-240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting for your convenience.
DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DONT place water filled vessels on top of T.V. cabinets. DONT remove any fixed cover as this may expose dangerous voltages. DONT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. DONT use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving. DONT obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. DONT use makeshift stands and NEVER fix legs or stands to the TV with any screws other than those provided - to ensure complete safety always use the manufacturers approved stand with the fixings provided. DONT allow electrical equipment to be exposed to rain or moisture. -801-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p65 8

2. Power Cord

The power supply cord should be placed so that it is not likely to be walked on or pinched by items placed upon them or against it. Pay particular attention to cord where it enters the plug, power outlet, and the point where it exits from the receiver.

3. Moisture and Water

Do not use this equipment in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this equipment to rain or water, as this may be dangerous and do not place objects filled with liquids on top. Avoid from dripping or splashing.

4. Cleaning

Before cleaning, unplug the receiver from the main supply, outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.

5. Ventilation

The slots and openings on the receiver are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.

6. Lightning

In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.

7. Replacement Part

When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorised substitutions may result in fire, electrical shock, or other hazards.

8. Servicing

Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock.

9. Naked Flame Sources

Do not place naked flame sources on the apparatus. WARNING: When the device is not in use for a long time, disconnect from power. Instructions for waste disposal: Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children. Battery, including those which is heavy metal-free, should not be disposed of with household waste. Please dispose of used battery in an environmentally sound manner. Find out about the legal regulations which apply in your area. Cold cathode fluoresant lamp in LCD PANEL contains a small amount of mercury, please follow local ordinates or regulations for disposal. "The LCD panel is very high technology product with about a million thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product."

DO NOT LEAVE YOUR TV AT STAND-BY OR OPERATING WHEN YOU LEAVE YOUR HOUSE
-901-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
Before Switching On Your TV

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.
batteries inside. Replace the battery cover.
Connections To The Aerial Input Socket
NOTE: Remove batteries from remote control handset when it is not to be used for a long period.Otherwise it can be damaged due to any leakage of batteries.

Switching The TV ON/OFF

867G@UW

To switch the TV on:

Your TV will switch on in two steps: 1- Connect the power supply cord to the system. Press On/Off switch at the rear of the TV. Then the TV switches itself to stand-by mode and the led becomes red located on the front of the TV. 2- To switch on the TV from stand-by mode either: Press a digit button on the remote control so that a programme number is selected, or, Press , "-P/CH" or "P/CH+" button at the top of the TV or press -P/CH or P/CH+ button on the remote control, so that last switched off mode is selected. By either ways the TV will switch on and the led becomes green.

9+)8+)

S@6SPAUC@UW
Connect the aerial or cable TV plug to the Aerial socket located at the back of the TV. If you are also connecting a VCR, plug the aerial cable into the aerial input socket on the VCR and then connect the RF output cable from the RF out socket on the VCR to the TV aerial socket. See P24 for further details.
How To Connect Other Devices
IMPORTANT: Switch off the TV before connecting any external device. Sockets for external connections are at the back and side of the TV. For connection of other devices via Euroconnector refer to the manuals of the related devices.
Inserting Batteries In The Remote Control Handset
Place the batteries in the right directions as seen below. Remove the battery cover located on the back of the handset by gently pulling upwards from the indicated part. Insert two MN2400 AAA or equivalent type

To switch the TV off:

Press the stand-by button on the remote control, so the TV will switch to stand-by mode and the GREEN LED will become RED, or, Press the button located on the top of the TV, so the TV will switch off and the GREEN LED will become RED.
- 10 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
To power down the TV completely, press On/Off switch, or unplug the power cord from the mains socket.

settings menu. (See page 17 for Program table explanation.)
Operating with the buttons on the TV set
Volume setting and programme selection can be made by using the buttons at the control panel on the top of the TV. Volume Setting Press "VOLUME -" button to decrease volume or "VOLUME +" button to increase volume, so a volume level scale (slider) will be displayed at the middle of the bottom on the screen.

yr rr $ vtuyrshqw

Operating The TV
You can operate your TV both using the remote control handset and onset buttons.
Initial APS (Automatic Programming System)
The following menu will be displayed on the screen when you turn on your TV for the first time. APS, searches and sorts all channels and stores them automatically on your TV, according to the transmission of programme systems in your area.

vvvhyh rtyvu

Programme Selecting Press "P/CH+" button to select the next programme or "PCH-" button to select the previous programme. "P/CH+ / PCH-" and "VOLUME + / VOLUME " buttons on the TV are used as navigation buttons in menu. Entering The Menu Press "MENU" button at the control panel on the top of the TV to enter the menu. "P/CH+ / PCH-" and "VOLUME + / VOLUME " buttons at the control panel on the top of the TV work as direction buttons in the menu. AV Mode Press "TV / AV" button at the control panel on the top of the TV to switch your TV to AV mode (See AV Modes in page 20).

yhthtr

1x3rhiyr
yrhrpurpxurhrhphiyr 1UW3phpry vtuyrspuhtryhthtr
To cancel APS before starting, press TV button. First of all choose language and country by using / and / buttons. This, will effect the sort process in APS. To start aps select autoset, by using / buttons and press / or OK button.
puhryrhpuvt yrhrhv rrphpry
Operating With Remote Control
After APS is finalized, the programme table will be appeared on the screen. In the programme table you will see the programme numbers and names assigned to the programmes. If you do not accept the locations and / or the programme names of programmes, you can change them in APS submenu in the The remote control handset of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV. Functions of the menu system are described in Menu System section.

image size By pressing / button, select image size. "right/left to change image size" is seen on the screen. By pressing / button, you can change image size to fill all, fill 1:1 and fill aspect.

audio menu

By pressing / button, select the third icon. Audio menu appears on the screen.
ihyhpr rhyvr 6WG vqrq qhvp ih

qshqvhqwr

volume By pressing / button, select volume. "right/left to adjust volume" is seen on the screen. Press button to increase volume level. Press button to decrease volume level. Volume level can be adjusted between 0 and 54. headphone volume By pressing / button, select hp volume. "right/left to adjust hp volume" is seen on the screen. Press button to increase hp volume level. Press button to decrease hp volume level. Hp volume
AVL By pressing / button, select AVL. "right/left for AVL on/off" is seen on the screen. By pressing / button set to AVL on to activate it or off to deactivate it.
- 14 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
wide sound It is used to gain saloon effect to the sound. By pressing / button, select wide sound. "right/left for wide sound off/stereo/ mono" is seen on the screen. By pressing / button set to wide sound on to activate it or off to deactivate it. dynamic bass Dynamic Bass is used to increase bass effect of the TV set. By pressing / button, select dynamic bass. "right/left for dynamic bass on/off" is seen on the screen. By pressing / button set to dynamic bass on to activate it or off to deactivate it.

yhthtr p v

rtyvu ss

r ihpxtq puvyqypx ph!

hypr Tph ss

yrrvr yrrvrrhvvt

"vr

qshvrv

osd timeout By pressing / button, select osd timeout. "right/left to change osd timeout" is seen on the screen. By pressing / button, you can change osd timeout to 5 sec, 15 sec or 60 sec. menu background By pressing / button, select menu background. "right to change menu background" is seen on the screen. You can change menu background to translucent or opaque by pressing button. child lock You can use this feature to prevent children turning on TV or changing programs or adjustments etc. without remote control. By pressing / button, select child lock. "right/left to change" is seen on the screen. The child lock feature can be set by or button to either on or off. When off is selected, there will be no difference in the operation of your TV. When on is selected, the TV can only be controlled by the remote control handset. scart 2 out By pressing / button, select scart 2 out. "right/left to select scart 2 out" is seen on the screen. You can set scart 2 out to Scart 1, Tuner or FAV by pressing / button.

a9A qyrsvturqvyhiry 1pr3pyrhyhiry 1r3r
By moving the cursor in four directions you can reach 30 programmes in the same page. By scrolling the pages up or down by pressing the navigation buttons you can select all the programmes in TV mode (except the AV mode). In program table, / buttons work like "Direction Up" and "Direction Down". By cursor action, programme selection is done automatically. Programme Number is between 01 and 99. 00 is not displayed on program table. Programme Name has a name string with 5 characters. After autoset process the Programme Names are set to "C02" or "S07" (channel type and channel number) or name of the tuned channel if defined. At the bottom of the program table there is a programme sort functions section. Each function is activated by colour button (seen above). By pressing Delete you can delete programmes that you have selected. Insert section is for inserting programmes into another programme spaces. Name allows changing the programme name. Delete: For "Delete" process RED button is pressed. The following warning menu comes to screen. Pressing M button cancels the activated "Delete" process. Pressing OK button erases the selected programme from the programme list, and the programmes below shift one up.
The first letter of the selected name is highlighted. To change that letter / button can be used, and to select the other letters, / button can be used. If the cursor is at the last letter of the Programme Name, pressing button moves the cursor at the beginning. On the contrary, if the cursor is at the beginning of the Programme Name, pressing button moves the cursor at the end. country By pressing / button, select country. "right/left to change country" is seen on the screen. By pressing / button, you should select the country where you are. autoset By pressing / button, select autoset. "right/left to start aps function" is seen on the screen. When / or OK button is pressed, the following menu comes to the screen. If you want to cancel autoset function, press M button. You return to aps menu.
- 17 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
If you press M button after autoset is started, program table appears on the screen.

6yyrrqth vyyirqryrrq

fine tune By pressing / button, select fine tune. "right/left to adjust fine tuning" is seen on the screen. By pressing / button, you can adjust the tuning. The adjust values are between -50 and +50. channel By pressing / button, select channel. "right/left to change channel" is seen on the screen. By pressing / button, you can change the channel number. You can also enter a number via digit buttons on the remote control. The adjust values change according to the standard and channel type. standard By pressing / button, select standard. "right/left to change standard" is seen on the screen. By pressing / button, you can change the standard to B/G, D/K, I or L/L'. (optional) channel type

If OK button is pressed, autoset function starts and the following menu comes to the screen.
After autoset is finalized, the program table comes to the screen.

programming menu

By pressing / button in tv tuner menu select the first icon. Programming menu appears on the screen.
By pressing / button, select channel type. "right/left to change channel type" is seen on the screen. By pressing / button, you can change the channel type to C or S. edit labels By pressing / button, select edit labels. "right/left to edit labels" is seen on the screen. By pressing / or OK button, you can enter the following menu.

svrr puhry

program By pressing / button, select program. "right/left to select program" is seen on the screen. By pressing / button, you can select the program number. You can also enter a number via digit buttons on the remote control. There are 100 program storage between 0 and 99.
/ or / buttons are used to edit labels. store program By pressing / button, select store program. "right/left to store program" is seen on the screen. By pressing / or
- 18 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
OK button, you can store the program and following menu appears on the screen.

Other Features

TV Status
Programme Number, Programme Name and Sound Indicator are displayed on the upper right side of the screen. Source is also displayed with them on the right bottom side of the screen. They are displayed after programme change during 3 seconds.
manual search By pressing / button, select manual search. "right/left to search" is seen on the screen. By pressing or button, you can start program searching and following menu appears on the screen.

Programme Number

35 Programme Name (5 characters)
These OSDs are displayed when a new programme is entered by digit button, by pressing P<P button or -P/CH or P/CH+ button or TV button.

source select

By pressing / button, select source select in settings menu. "<ok> to activate source selection menu" is seen on the screen. By pressing / or OK button, you can enter the source select menu.
Previous Programme Press "P<P" (Previous Programme) button to select the last selected programme. This button provides swapping between last two selected programmes. For example, select programme 8, then select programme 2. Now, if you press "P<P" button, programme 8 will be selected. If you press the same button again, programme 2 will be selected and so on.

To Operate Teletext

Select a TV station on which Teletext is being transmitted. Press button. Usually the list of contents (index) is displayed on the screen.
- 20 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
To Select A Page Of Teletext
Press the appropriate digit buttons for the required Teletext page number. The selected page number is displayed at the top left corner of the screen. The Teletext page counter searches until the selected page number is located, so that the desired page is displayed on the screen.
To Reveal Concealed Information
Pressing button once will reveal answers on a quiz or games page. Pressing button again will conceal the revealed answers.
To Stop Automatic Page Change
The teletext page you have selected may contain more information than what is on the screen; the rest of the information will be displayed after a period of time. button to stop the automatic Press page change.
Press button again to allow the next page to be displayed.
Press P/CH + button to move the Teletext screen forward one page at a time. Press - P/CH button to move the Teletext screen backward one page at a time.

To Select A Subcode Page

Subcode pages are subsections of long Teletext pages that can only be displayed on the screen one section at a time. Select the required Teletext page. Press button. Select the required subcode page number by pressing four digit buttons (e.g. 0001). If the selected subcode page is not displayed button. TV in a short time, press programme will be displayed on the screen. Teletext page number will be displayed on the upper left corner of the screen when the selected page is found. Press button to display the selected Teletext page.

To Select Index Page

To select the page number of the index (generally page 100), press button.
To Select Teletext With A TV Programme
Press button. The text is now superimposed over the programme on the screen. button again to return to the Press Teletext page.
To Select Double Height Text
Press button for the top half of the information page to be displayed in double height text. Press button again for the bottom half of the information page to be displayed in double height text. Press button once more for the full page of normal height text.

To Exit Teletext

Press or 79 button. The screen will switch to TV mode.

To Display The Time

While watching a TV programme with Teletext transmission press button. The current time information, captured from Teletext will be displayed on the screen. Press button again to remove the
- 21 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45

time from the screen. If the programme being watched does not have Teletext transmission, no information will be displayed.
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV. The following connection diagrams show you where the different (Optional) equipment should be connected at the back or right side of the TV.

Fastext

Your TV supports the 10 page Teletext system. When the page number of any of the 10 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically. If the requested page is not in memory, the system will search for the requested page number and save the 10 pages including the requested page into memory after finding it. For Fastext The subject-heading for the information may have a particular colour. Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly. For TOP text TOP text mode of operation will be activated automatically according to the transmission. If TOP text transmission is present, colour coded buttons will appear in status row. If TOP text transmission is not present, status row will not appear. The subject-heading for information may be located in colored box. In Top mode the -P/CH or P/CH+ commands will request the next or previous page respectively. If TOP text transmission is not available, in case of operation of these commands, wraparound occurs. For example page 100 appears to be one greater than page 199.

Via The Euroconnector

TFT TV has 2 Euroconnector sockets. If you want to connect peripherals (e.g. video, decoder, etc.) which have Euroconnectors, to the TV, use SCART 1 or SCART 2 inputs. If an external device is connected via Euroconnector sockets TV is switched to AV mode automatically. If the signal is RGB, select RGB in the source select menu to view picture. If the external device is connected to SCART 1, choose Scart 1 RGB. If the external device is connected to SCART 2, choose Scart 2 RGB.

Via Aerial Input

If you want to connect to your TV, peripherals like video recorders or decoders, but the device you want to connect does not have Euroconnector, you should connect it to the Aerial input of the TV. If the VCR is connected via Aerial input it is suggested to use the Programme 0.

Decoder

Cable TV offers you a wide choice of programs. Most of them are free, others are to be paid for by the viewer. This means that you will need to subscribe to the broadcasting organisation whose programmes you wish to receive. This organisation will supply you a corresponding decoder unit to allow the programmes to be unscrambled. For further information ask your dealer. See also the booklet supplied with your decoder.

- 22 01-ENG-26705W-1546UK-26 INCH TFT-(LG)(10 PAGE)(WO PIP)-50058455.p27.12.2004, 08:45
Connect a decoder with an aerial socket to the TV Connect the aerial cable. Connect a decoder without an aerial socket to the TV Connect the decoder to the TV with a eurocable to SCART 1.
Search for the test signal of your video recorder in the same way as you searched for and stored the TV signals. See programming menu. Store the test signal under programme number 0. Replace the aerial cable in the aerial socket ANT of your video recorder once you have stored the test signal.

TV And Video Recorder

Connect the aerial cables. Better picture quality can be obtained if you also connect a eurocable to SCART sockets.
Camera And Camcorder To Connect To FAV Input
Connect your camera or camcorder FAV input at the right side of the TV. Connect your equipment to the TV via VIDEO (yellow), AUDIO R (red) and AUDIO L (white) inputs. You should connect the jacks to the input in the same color.

Playback NTSC

To use this option you can; Connect NTSC VCR player to Euroconnector at the rear side of the TV. Connect NTSC VCR player to RCA Jacks at the right side of the TV. Then, press SOURCE button to select proper source.
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS input at the right side of the TV. Connect your equipment to the TV via S-VHS input and audio inputs of FAV inputs by using S-VHS cables.

Copy Facility

Source selection for VCR recording. Select options menu. Select scart 2 out source pressing / button. Select Scart 1 to copy the picture from tuner. Select Scart 2 to copy the picture from FAV or SCART 2.
Connect The Decoder To The Video Recorder
Some video recorders have a special euroconnector for decoder. Connect a eurocable to the euroconnector of your decoder and to the special euroconnector of your video recorder. See also the booklet of your video recorder. To connect your video recorder to the TV, see TV and Video Recorder section. If you want to connect more equipment to your TV, consult your dealer.

VR 414 LVA

TOSHIBA
21 N21 BN13 D (i) VTW 2887

VESTEL

17MB11 (i) 17MB18

WHARFEDALE

E9 Chassis (ii) Please Note: Models and chassis indicated by (i) differ to previously published information. (Sch) Indicates Schematics Only

MATSUI

TVR 180 T

MITSUBISHI

HVS 451 B
U-View Publishing 73, St Martins Ave York Road Doncaster Yorkshire DN5 8JA Tel: info@u-view-circuits.co.uk www.u-view-circuits.co.uk