32LD8700U

82cm Visible LCD
Hitachis new 32LD8700U LCD Widescreen Television combines the latest flat panel technology with stylish design. Offering a whole range of features, this LCD TV will fit perfectly into any environment.
82cm Visible LCD Widescreen Television HD Ready Digital Terrestrial & Analogue Tuner High Screen Resolution of 1366 x 768 pixels 2 x SCART Sockets HDMI and Component Sockets Side Input Terminal 15-pin D-sub PC socket Panel Luminance 550cd/m2 Contrast Ratio 1000:x 8W RMS Output Headphone Socket for Personal Viewing
The "HD ready" Logo is a trademark of EICTA HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Technical Specifications

PICTURE
Screen Size Screen Type Resolution (Pixels) Advanced Image Technology Panel Luminance (Typical) Contrast Ratio HD Ready PaP/PaT/PinPC Aspect Ratio 82cm Visible LCD 1366 x 768 I3 550cd/m2 1000:1 // 16:/ PAL I I' PAL/SECAM/I I'/BG/H/L L'/DK (7days) / / 2 Selectable
RMS Output Dynamic Bass 3DS 2 x 8W Europe 180W/<3W 16kg 13.5kg 854 x 649 x x 600 x 104 UK, F, GE, IT, SP, SWE, NOR, GRE, TUR, DUT, POR, DAN, FIN UK, F , GE, IT, SP UK 4902530773392 As supplied UK

AUDIO CONNECTIONS

Audio In Audio Line Out PC In Headphone Socket

ANALOGUE TUNER

Programmes Cable/Hyperband UK Specifications European Specifications

COMPUTER INPUT

15-pin D-sub

GENERAL

Country of Origin Power Consumption/Standby Weight (inc stand) Weight (exc stand) Dimensions (W x H x D) (mm) (inc stand) Dimensions (W x H x D) (mm) (exc stand) OSD Languages Analogue Digital IB Languages EAN Code

DIGITAL TUNER

HITACHI DIGITAL MEDIA, Hitachi Europe Ltd, Whitebrook Park, Lower Cookham Road, Maidenhead, Berkshire SL6 8YA UNITED KINGDOM Tel: +44 (0)000 Fax:+44 (0)500 www.hitachidigitalmedia.com
Digital Teletext (MHEG 5) DVB EPG Program Reminder & Event timer Multi Language Subtitle Decoding and Display

VIDEO SIGNAL INPUT

PAL/PAL60 SECAM NTSC4.43/3.58
The specification above and photography is for reference only and may be subject to change.

ACCESSORIES

Wall Mount

VIDEO CONNECTIONS

HDMI Input SCART Socket Component Video Progressive Input (PAL/NTSC) S-VHS Video Composite Video Video Line Out (Tuner)

AVAILABILITY

Safety Precautions

Please read the following recommended safety precautions carefully for your safety.
IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV

Dos and Donts

This Television has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO consult your dealer if you are in any doubt about installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. This TV is supplied with a fitted mains plug. This plug must not be cut off as it may contain a special radio interference filter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate safety approved extension lead or consult your dealer. Observe the manufacturers instructions when connecting extension leads to the TV. Check the fuse rating on the new plug, this should be fitted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1 362) approvals, these are easily identifiable by either the or
symbols. If you are in any doubt about the in-
-550101374-ENG-3230W-HL02331HT UK-32 INCH TFT UK IDTV-17MB15-(LG-SL01)-32LD8700UB.p26.02.2007, 19:04
stallation of an extension lead, please consult a competent electrician.

1. Power Source

The set should be operated only from a 220240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting for your convenience.
DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DONT place water filled vessels on top of T.V. cabinets. DONT remove any fixed cover as this may expose dangerous voltages. DONT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. DONT use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving. DONT obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. DONT use makeshift stands and NEVER fix legs or stands to the TV with any screws other than those provided - to ensure complete safety always use the manufacturers approved stand with the fixings provided. DONT allow electrical equipment to be exposed to rain or moisture.

CABLE TV

VHF/UHF

REAR OF THE TV

Connect the aerial or cable TV plug to the Aerial input socket located at the rear of the TV and connect the cable plug coming out from the TV out socket located on the devices (VCR, DVB etc.) to this socket as well.
2- To switch on the TV from stand-by mode either: Press a digit button on the remote control so that a programme number is selected, or, Press the "+P/CH " or "P/CH-" button at the right side of the TV or press the P- or P+ button on the remote control, so that last mode switched off is selected. By either method the TV will switch on and the led becomes green.
How To Connect Other Devices
IMPORTANT: Switch off the TV before connecting any external device. Sockets for external connections are at the rear side of the TV. For connection of other devices via Scart refer to the manuals of the related devices.

To switch the TV off:

Press the (stand-by) button on the remote control or On/Off switch at the right side of the TV, so the TV will switch to stand-by mode and the GREEN LED will become RED. To power down the TV completely, press Power On/Off button at the rear side of the TV, or, Unplug the power cord from the mains socket.
Inserting Batteries In The Remote Control Handset
Remove the battery cover located on the back of the handset by gently pulling downwards from the indicated part. Insert two AA/R6 or equivalent type batteries inside. Place the batteries in the right directions. Replace the battery cover. -8-
50101374-ENG-3230W-HL02331HT UK-32 INCH TFT UK IDTV-17MB15-(LG-SL01)-32LD8700UB.p26.02.2007, 19:04

Initial Settings

When the TV is turned on for the first time, it is in the digital mode. Because this is the first time the TV is used, there are no channels stored in the memory and the following message appears on the screen.
Please ensure aerial is plugged in. Do you want to start first time installation? Yes No

OK Cancel

PROGRAM Country UK
WARNING ! All prestored programs will be deleted
To start installation process, select Yes, to cancel select No. To select an option Yes or No, highlight the item by using or buttons and press the OK button. The IDTV will automatically tune to the UHF transmission channels 21 to 68 looking for digital terrestrial TV broadcasts and displaying the names of channels found. This process will take about five minutes. To cancel searching, you can press the button at any time during the process.
AUTOMATIC SEARCH Channels:
BBC ONE BBC TWO BBC CHOICE
Press the BLUE button to cancel APS if you d o n o t wan t t o d e l e t e yo u r e xi s t i n g programme list. To continue APS, first select the country by pressing / button and then press the RED or OK button.
APS is running. UK - I 055,25 Mhz Cancel

Lock Edit Name

Now pressing or button moves to the previous/next character. Pressing or button toggles the current character, i.e., b character becomes a by and c by. Pressing the numeric buttons 0.9 replaces the highlighted character with the characters printed above the button one by one as the button is pressed. Press the button to cancel the editing or OK button to save the new name. Adding locks to channels

Lock Delete

Channel Locking provides a password-protected access to channels selected by parents. In order to lock a channel you should know the Parental Lock password (default value is set to 0000 in the factory and can only be changed from the Configuration Menu). - 11 -
Select the channel to be locked by highlighting it and select the Lock option by pressing or button. When the OK button is pressed, a password box is displayed.

Add/Remove. i More

On Screen Help Pressing INFO Button

Lock/Unlock

Enter Lock Key
For all menus press the button to display the help information about the menu functions. For Channel List menu the following message is displayed on the screen.
Press the SELECT button on your remote control to tune to the highlighted channel. Press MENU to exit this screen.
Enter the password using the digit buttons on will now the remote control. The Lock icon be displayed next to the selected channel. Repeat the same operation to cancel the Lock. Setting Favourites You can set various channels as favourites so that only the favourite channels are navigated when you press the P +/- keys on the remote control. To set a favourite you should highlight the Favourites item at bottom of the Channel List menu. Use the or button to highlight the Favourites item at the base of the screen and then, in turn, highlight each channel you want to add to the favourites list, using the and buttons and press the OK button. A channel selected as a favourite appears in the main channel list with a favourites icon ( ) against the channel name.

Installation

The Installation menu mainly intends to help you for building a Channel Table in the most efficient way.
This menu includes the following items: 1. Add New Channels 2. First Time Installation. ADD NEW CHANNELS: This tuning menu consists of two parts: Automatic Search Manual Search
Installation Add New Channels Automatic Search First Time Installation Manual Search
You must then set the Favourite mode to ON in the Configuration menu (see page 14 for further details).
Automatic Search: Automatic search is started by pressing the
- 12 50101374-ENG-3230W-HL02331HT UK-32 INCH TFT UK IDTV-17MB15-(LG-SL01)-32LD8700UB.p26.02.2007, 19:04
OK button in the auto-search pop up menu. All the services are searched and a channel table is created automatically. All channels found are stored in a sorted form with respect to their channel numbers. Some services may not appear with the correct channel number. At the time of printing, not all broadcasters are sending their channel number information. Manual Search: In manual search, the number of the multiplex is entered manually and only that multiplex is searched for the channels. For every valid channel number, signal level, signal quality and network name are shown at the bottom of the screen. In both manual and auto search any existing channel in the database is not re-stored to avoid redundant duplicates of that channel. FIRST TIME INSTALLATION The user can use this item to load default settings, which had been loaded to the receiver at the factory. To install factory settings, highlight First Time Installation menu and press the OK button, then you will be asked to confirm for deleting all channels and settings.
Installation Add New Channels First Time Installation
Your previous digital channel list will be destroyed. Are you sure you want to delete all digital channels and settings for first time installation? Yes No
Press the OK button to search for analogue channels.The following menu appears on the screen for analogue channel search.

Cancel

First of all choose Language and Country by using / and / buttons. This will affect the sort process in APS. To start APS, press the RED or OK button.
After APS is finalized, the programme table will appear on the screen. In the programme table you will see the programme numbers and names assigned to the programmes. If you do not accept the locations and / or the programme names, you can change them in the Program menu. (See page 22 for Program table explanation.)

In the Configuration menu, highlight the Receiver Upgrade item by pressing or button and press the OK button to start upgrade process. There are two possibilities for Receiver software to be upgraded: automatic and manual.
Automatic Download Enabled Search for New Version
Automatic Download (Automatic upgrade) Automatic Download can be enabled or disabled by pressing or button. If it is enabled, then there are two ways for automatic upgrade. The first one is checking the existence of a new software every time the IDTV goes to standby. The second one is waking up at 03:00 a.m. every night, provided that the IDTV is left in standby mode.
- 14 50101374-ENG-3230W-HL02331HT UK-32 INCH TFT UK IDTV-17MB15-(LG-SL01)-32LD8700UB.p26.02.2007, 19:04
Both automatic upgrade methods result in standby mode either upgraded or not. If the automatic upgrade is set to Disabled then this function will not work. Search For New Version (Manual upgrade) Manual upgrade starts if the Search for New Version item is highlighted by using or button and activated via pressing the OK button. After Search for New Version is activated, the IDTV tunes to each frequency that have been stored in its database and looks for the new software.

Software Upgrade

Searching for upgrade. Please wait, or press MENU to cancel. Search Progress:

Menu Lock Set Lock Key

There you can set/reset locking for the Main Menu, or the Installation Menu to restrict access. If the menu lock is disabled, there will be free access to the menu system. Also in this menu you can change the lock key and set/change parental lock mode. Disabled: All menus are unlocked. Main Menu: Main menu is accessible only with the correct lock key. So the user cannot add, delete, rename, move channels, cannot set timers. Installation: Installation menu is locked, so the user cannot add channels. Changes will be updated after exiting Configuration Menu.
Parental Settings Some channels broadcast material which you do not want younger members of the family to watch. Any channel can be locked so that it cannot be selected for viewing without first a four-digit PIN code being entered. In this way any channel not suitable for younger viewers can be protected. This function enables or disables the menu protection system and allows the PIN code to be changed. Use or button to go to Parental Settings option. Press the OK button to enter Parental Settings Menu. A box asking for the lock key is displayed.

Timers

Display the Main Menu by pressing the button. Highlight the Timers line by pressing or button and press the OK button to display the Timer menu.
There is only one key which is set to 0000 initially. Enter lock key. If wrong Lock key is entered, the following message is displayed on the screen and it is returned back.

Wrong Lock Key

Up to five separate timer events can be set and each is displayed in the Timer screen, showing the event number, the channel to be selected, the start time, end time, date and the mode - whether that event is active (and will be acted on) or not.
TIMER MENU No Channel Name 1. 2. 3. 4. 5. 6. ITV 1 BBC ONE BBC ONE BBC ONE BBC ONE BBC ONE Start 20:00 00:00 00:00 00:00 00:00 00:00 End 21:00 00:00 00:00 00:00 00:00 00:00 Date 12/05/2005 01/01/2005 01/01/2005 01/01/2005 01/01/2005 01/01/2005 Mode Active Inactive Inactive Inactive Inactive Inactive
If it is correct, the Parental Settings Menu including following items is displayed:

Toggle Mode

Edit Timer
- 15 50101374-ENG-3230W-HL02331HT UK-32 INCH TFT UK IDTV-17MB15-(LG-SL01)-32LD8700UB.p26.02.2007, 19:04
To set an event, highlight its mode button using the or button and press the OK button to display the timer entry window.
Name: Start: End: Date: Mode: 3. ITV 1 00:00 00:00 03/06/2005 Once

Language

Some programmes are broadcast in two or more languages simultaneously. The language heard can be selected from the Language Menu. Press the button to display the Main Menu and use or button to highlight the Language line and press the OK button.
Here the five settings of channel name, start time, end time, date and frequency mode can be set. You can move freely between each setting using the or buttons. or The channel name is set using the button to display the channel which broadcasts the programme. The start time, end time and date are each set with the digit buttons on the remote control in 24-hour format. The frequency mode determines how often the receiver operates this event and is set with the or button to be either Once, Daily, or Weekly. If an invalid number for the start or end times or the date is entered, Entered time is not valid message appears on the menu. RECORDING FROM IDTV Connect your VCR to AV2 via a scart lead. Set the AV2-OUT in the feature menu to DDT, as illustrated and described on page 20. Set the time as described above. Set your TV to standby using the remote control. Set your VCR to correspond with the time set on your TV and select external input (refer to your VCR instruction book). NB. If you switch on your TV whilst the timer recording is active and then switch back to standby, the timer recording will be cancelled; the timer setting will be deleted and the desired programme will not be recorded.

Use the or button to highlight the soundtrack language required and press the OK button. Normal viewing, with the required language soundtrack, can be resumed by pressing the

Languages

English

button.

If the programme has no alternative language soundtrack broadcast, the Language Menu will not be available, but a message, No Multi Language Available is displayed briefly.

TV Setup

To be able to go through TV functions, you can use this item. The digital TV Setup menu screen is accessed from the main menu. Press the button to display the main menu and use or button to highlight TV Setup, press the OK button to display TV Setup menu screen.
- 16 50101374-ENG-3230W-HL02331HT UK-32 INCH TFT UK IDTV-17MB15-(LG-SL01)-32LD8700UB.p26.02.2007, 19:04
Detailed information about Sound, Picture and Feature menus are in AnalogueTV Menu System section on page 17.
3. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated. Some CAMs may require the following set up. Please set the CAM by entering the IDTV menu, Common Interface then pressing the OK button. (CAM set up menu is not displayed when it is not required.) To see the viewing contract information: Enter IDTV; press the button, then highlight Common Interface and press the OK button. When no module is inserted, No Common Interface module detected message appears on the screen. Refer to the module instruction manual for details of the settings.

Common Interface

Press the button to display the Main Menu and use the or button to highlight the Common Interface line and press the OK button.
It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial broadcasting. Obtain the Conditional Access Module (CAM) and the Viewing card by subscribing to a pay channel company, then insert those to the Television using the following procedure. 1. Switch off the TV and unplug from the mains. 2. Insert the CAM, then Viewing Card to the slot that is located in the terminal cover at the left-hand side of the TV (from front view). The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.

Menu System

Your TV has been designed with a menu system to provide easy manipulation of a multifunction system. Press the button to enter the menu. Press / button to select a menu title and then / button to select a menu item and / or OK button to enter the menu item. Press the Press the menu. button to exit the menu. button to return to the previous

Picture menu

By pressing button, select the first icon. / Picture menu appears on the screen.
PICTURE Mode Contrast Brightness Sharpness Colour Colour Temp Noise Reduction Film Mode 3D Comb Reset PAL 50Hz Cinema Warm Medium Off Off

Menu Background By pressing / button, select Menu Background. You can change menu background to Translucent or Opaque by pressing button. / Menu Timeout By pressing / button, select Menu Timeout. Press / button to change menu timeout to 15 sec, 30 sec or 60 sec. Teletext Language By pressing / button, select Teletext Language. Press / button to change Teletext Language to West, East, Cyrillic, Turk/Gre or Arabic. This will normally be set to West for Western Europe.
Colour System By pressing / button, select Colour System. Press / button to change the colour system to PAL, PAL60, SECAM or AUTO. Note: In EXT mode, you can choose NTSC 3.58 and NTSC 4.43 as well. Sound System By pressing / button, select Sound System. Press / button to change the sound system to BG, DK, I or L/L. Fine Tune By pressing / button, select Fine Tune. Press / button to adjust the tuning. Search By pressing / button, select Search. Press / button to start program searching. The searching will stop when a signal is found. You can also enter a frequency value directly by pressing the digit buttons. VCR (Video Cassette Recorder)

0 224.25 Off

Install menu
By pressing / button, select the fourth icon. Install menu appears on the screen.
INSTALL Program Band Channel Colour System Sound System Fine Tune Search VCR Store Program 1 C 12 AUTO BG
This item can be seen in all modes except AV-3, AV-5 and PC RGB. If you want to watch a VCR source from one of these modes, then it will be better to set VCR mode on. For this, while the cursor is on this item press the / buttons to set it On. If you want to watch a DVD , then you must set this item off. Store Program By pressing / button, select Store Program. Press / OK button to store the or adjustments. Program Stored will be displayed on the screen.
Program By pressing / button, select Program. Press / button to select the program number. You can also enter a number via digit buttons on the remote control. There are 100 program storage between 0 and 99. Band Band can be selected either C or S by pressing / button. Channel Channel can be changed by / button or Digit Buttons.
- 21 50101374-ENG-3230W-HL02331HT UK-32 INCH TFT UK IDTV-17MB15-(LG-SL01)-32LD8700UB.p26.02.2007, 19:04

Program menu

By pressing / button, select the fifth icon. Program menu appears on the screen.
PROGRAM ITV ZDF CH5 C - 02 C - 05 C - 06 C - 08 C - 21 C - 23 C - 20
APS (Automatic Programming System) When you press the BLUE button for APS, the following warning screen will be displayed.

By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except the AV mode). By cursor action, programme selection is done automatically. Name: To change the name of a decided programme, select the programme and press the RED button. The first letter of the selected name starts to blink. Press / button to change that letter and / button to select the other letters. By pressing the RED button, you can store the name. Insert: Select the programme which you want to insert by navigation buttons. Press the GREEN button. By navigation buttons move the selected programme to the decided programme space and press the GREEN button again. Delete: To delete a programme, press the YELLOW button. Pressing the YELLOW button again erases the selected programme from the programme list, and the programmes below shift one up.
After APS is finalized, the programme table will appear on the screen.

Source menu

By pressing button, select the sixth icon. / Source menu appears on the screen.
SOURCE : TV TV/ DTT AV - 1 AV - 2 AV - 3 AV - 4 AV - 4S AV - 5 PC RGB
In source menu, highlight a source by pressing / button and switch to that mode by pressing OKbutton. / or
- 22 50101374-ENG-3230W-HL02331HT UK-32 INCH TFT UK IDTV-17MB15-(LG-SL01)-32LD8700UB.p26.02.2007, 19:04

PC Mode

Power off both Computer and Display before making any connections. Set your PCs resolution correctly before connecting to the TV. See the table on page 32 for supported modes. Use a D-SUB cable to connect the TVs PC input to the computers RGB output terminal.
15 Pin Mini D-Sub Connector
Select Autoposition item by using / buttons. Press OK button. or Warning: Auto position adjustment recommended to be done with the full screen image for the proper adjustment. H (Horizontal) Position This item shifts the image horizontally to right hand side or left hand side of the screen. Select H Position item by using / button. Use / button to adjust the value. V (Vertical) Position This item shifts the image vertically towards the top or bottom of the screen. Select V Position item by using / button. Use / button to adjust the value. Dot Clock Dot Clock adjustments correct interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Use / button to adjust the value. Phase Depending on the resolution and scan frequency that you input to the TV Set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method. Use / button to adjust the value.

Feature Menu

By pressing / button, select the fourth icon. Feature menu appears on the screen. The items in this menu are described at Feature menu starting page 20.

Source Menu

By pressing / button, select the fifth icon. Source menu appears on the screen. In source menu, highlight a source by pressing / button and switch to that mode by pressing OKbutton. / or

Sound in PC mode

Connect the PCs Audio output to the TVs PC Audio In socket with an audio cable.
At PAP Mode, two pictures with equal sizes are displayed on the screen. Aspect Ratios of the windows are fixed. When you switch to PAP Mode, Main window in PIP Mode is displayed on the right side of
- 24 50101374-ENG-3230W-HL02331HT UK-32 INCH TFT UK IDTV-17MB15-(LG-SL01)-32LD8700UB.p26.02.2007, 19:04
the screen. The active window can be changed by pressing the / button. Source restrictions of PAP Mode are same as in PIP Mode. It is not possible to show 2 different channels from the TV tuner at the same time.
16:9 Zoom: This zooms up the wide picture (16:9 aspect ratio) to the full screen.

Freeze Picture

You can freeze the picture on the screen by pressing the button. At PIP and PAP layouts; only the main picture can be frozen. 16:9 Subtitle: This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.

Zoom Modes

Zoom mode can be changed by pressing the button. You can change the screen size according to the picture aspect ratio. Select the optimum one from the following ZOOM modes.
Note: You can only choose 4:3 and FULL in PC mode.
Default Zoom Modes: 4:3 Use to view a normal picture (4:3 aspect ratio) as this is its original shape.
Auto: When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode according to the WSS signal. When the AUTO mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, change to another ZOOM mode manually. Full: This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen. Panoramic: This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural.

There is a wide range of audio and video equipment that can be connected to your TV. The following connection diagrams show you where the different (Optional) equipment should be connected at the rear side of the TV.

High Definition

Your Hitachi LCD Television is capable of displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI socket (AV-5) or Component Socket (AV-3). These sockets can accept either 720p or 1080i signals.

TV And Video Recorder

Connect the aerial cables. Better picture quality can be obtained if you also connect a Scart cable to SCART sockets.
- 27 50101374-ENG-3230W-HL02331HT UK-32 INCH TFT UK IDTV-17MB15-(LG-SL01)-32LD8700UB.p26.02.2007, 19:04

Playback NTSC

To use this option you can; Connect an NTSC VCR player to a Scart socket at the rear side of the TV. Connect an NTSC VCR player to RCA Jacks at the rear side of the TV.
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS input at the rear side of the TV. Connect your equipment to the TV via S-VHS input and audio inputs of AV inputs by using S-VHS cables.

Copy Facility

Source selection for VCR recording. Select Feature menu. Select AV-2 Out by pressing button. / Select a source to copy the picture from that source.
Connect The Decoder To The Video Recorder
Some video recorders have a special Scart socket for decoder. Connect a Scart cable to the Scart socket of your decoder and to the special Scart socket of your video recorder. Refer to the booklet of your video recorder. To connect your video recorder to the TV, refer to the TV and Video Recorder section. If you want to connect more equipment to your TV, consult your dealer.
Search For And Store The Test Signal Of The Video Recorder
Unplug the aerial cable from the aerial socket of your video recorder. Switch on your TV and put the video recorder on the test signal. (See the booklet for your video recorder.) Enter the Install menu and select search. Search for the test signal of your video recorder in the same way as you searched for and stored the TV signals. Store the test signal under programme number 0. Replace the aerial cable in the aerial socket of your video recorder once you have stored the test signal.

Care Of The Screen

Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.
You can not hear any sound. Did you perhaps interrupt the sound, pressing the button? Sound is coming from only one of the speakers.Is the balance set to one extreme? See Sound menu.

Poor Picture

Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or Teletext unrecognisable? Check if you have entered the correct frequency. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.

Remote Control

Your TV no longer responds to the remote control. Perhaps the batteries are exhausted. If so you can still use the local buttons at the bottom of the TV. Have you selected the wrong menu? Press the button to return to TV mode or press the button to return to the previous menu.

No solution

Switch your TV set off and on. If this does not work, call the service personnel; never attempt to repair it yourself.

No Picture

Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer. No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control?Try once more.
- 30 50101374-ENG-3230W-HL02331HT UK-32 INCH TFT UK IDTV-17MB15-(LG-SL01)-32LD8700UB.p26.02.2007, 19:04

Specifications

TV BROADCASTING PAL SECAM B/G D/K K' I/I' L/L' RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20/ S21-S41) NUMBER OF PRESET CHANNELS 100 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz. AUDIO German+Nicam Stereo AUDIO OUTPUT POWER (WRMS. ) (%10 THD) 2x8 POWER CONSUMPTION (W) (max.) 180 W < 3 W (Stand-by) PANEL 16:9 display, 32 Screen Size DIMENSIONS (mm)