Audio Line Outs Subwoofer Out PC Audio Input Aerial Scart 2 (EXT-2) Scart 1 (EXT-1) HDMI Input (EXT-5) Component Audio Inputs Component Video (YPbPr) Inputs VGA Input EXT-3
-401-ENG-3730W-CLE967 UK-HITACHI 37 INCH4TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15

Preparation

For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in tropical and/or moderate climates.
When no valid signal is detected, after 5 minutes the TV switches itself automatically to stand-by mode. PLL (Frequency Search) PC Input (Support up to WXGA 1366 x 768) Stereo PC Audio Input Plug&Play for Windows 9X, ME, 2000, XP 3D Comb Filter Audio Line Out

Features

Remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system. It has 2 Scart sockets for external devices (such as video, video games, audio set, etc.) 3DS Virtual Surround Sound Stereo sound system (German+Nicam). Full function Teletext. Fastext (1000 Pages), TOP text. Headphone connection. Direct channel access. A.P.S. (Automatic Programming System). All programmes can be named. Forward or backward automatic tuning. Sleep timer. Child Lock. Automatic sound mute when no transmission. NTSC Playback. AV in and S-VHS in are available. It has VGA connector for external devices such as computer. It has an HDMI connector for Digital Video and Audio. This connection is also designed to accept High Definition signals. It has PIP / PAP / PAT functions. AVL (Automatic Volume Limiting) TV Picture in PC

Panel Features

37-inch TFT LCD display. High resolution (1366x768) Contrast ratio (800:1 typical) Brightness (typical) 500 cd/m2. Display colour 16.7 Million.

Safety Precautions

IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV

Dos and Donts

This Television has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO consult your dealer if you are in any doubt about installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. This TV is supplied with a fitted mains plug. This plug must not be cut off as it may contain a special radio interference filter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate safety approved extension lead or consult your dealer. -5-

01-ENG-3730W-CLE967 UK-HITACHI 37 INCH5TFT-TRIDENT-(LG)-50073600.p65
Observe the manufacturers instructions when connecting extension leads to the TV. Check the fuse rating on the new plug, this should be fitted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1 362) approvals, these are easily identifiable by either the or symbols. If you are in any doubt about the installation of an extension lead, please consult a competent electrician.
sult in a fatal electric shock. NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry!

1. Power Source

The receiver should be operated only from a 220-240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting for your convenience.
DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DONT place water filled vessels on top of T.V. cabinets. DONT remove any fixed cover as this may expose dangerous voltages. DONT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. DONT use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving. DONT obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. DONT use makeshift stands and NEVER fix legs or stands to the TV with any screws other than those provided - to ensure complete safety always use the manufacturers approved stand with the fixings provided. DONT allow electrical equipment to be exposed to rain or moisture.

2. Power Cord

The power supply cord should be placed so that it is not likely to be walked on or pinched by items placed upon them or against it. Pay particular attention to cord where it enters the plug, power outlet, and the point where it exits from the receiver.

3. Moisture and Water

Do not use this equipment in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this equipment to rain or water, as this may be dangerous and do not place objects filled with liquids on top. Avoid from dripping or splashing.

4. Cleaning

Before cleaning, unplug the receiver from the main supply, outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.

5. Ventilation

The slots and openings on the receiver are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.

6. Lightning

In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.

7. Replacement Part

When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the origi-

ABOVE ALL

NEVER let anyone, especially children push anything into holes, slots or any other opening in the case - this could re-6-
01-ENG-3730W-CLE967 UK-HITACHI 37 INCH6TFT-TRIDENT-(LG)-50073600.p65
nal one. Unauthorised substitutions may result in fire, electrical shock, or other hazards.

8. Servicing

Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock.

9. Naked Flame Sources

Do not place naked flame sources on the apparatus. WARNING: When the device is not in use for a long time, disconnect from power. Instructions for waste disposal: Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children. Battery, including those which is heavy metal-free, should not be disposed of with household waste. Please dispose of used battery in an environmentally sound manner. Find out about the legal regulations which apply in your area. Cold cathode fluoresant lamp in LCD PANEL contains a small amount of mercury, please follow local ordinates or regulations for disposal.
"The LCD panel is very high technology product with about a million thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product."
DO NOT LEAVE YOUR TV AT STAND-BY OR OPERATING WHEN YOU LEAVE YOUR HOUSE
-701-ENG-3730W-CLE967 UK-HITACHI 37 INCH7TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15
Before Switching On Your TV

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.

6VUPQSPBS6H @tyvu Ghthtr 8 VF
Operating with the buttons on the TV set
Volume setting and programme selection can be made by using the buttons on the control panel at the right side of the TV. Volume Setting Press the button to decrease volume or the + button to increase volume, so a volume level scale (slider) will be displayed at the bottom of the screen. Programme Selecting Press the button to select the next programme or the button to select the previous programme. Entering The Menu Press the MENU button on the control panel at the side of the TV to enter the menu. / and +/ buttons on the TV are used as navigation buttons in menu. AV Mode Press the AV button on the control panel at the side of the TV to switch your TV to EXT modes.
QG@6T@8C@8F6IU@II6867G@ 6VUPQSPBS6HHDIBT`TU@H

PF 8hpry

First of all choose Language and Country by / and _ / ` buttons. This will afusing fect the sort process in APS. To start APS, press the RED or OK button.

6QTvvt $$!$Hu

Operating With Remote Control
The remote control handset of your TV is designed to control all the functions of your TV. The functions will be described in accordance with the menu system of your TV. Functions of the menu system are described in Menu System section. Volume Setting Press the button to increase volume. Press the button to decrease volume. A volume level scale (slider) will be displayed at the bottom of the screen. Programme Selecting (Previous or next programme) Press the P- button to select the previous programme.
After APS is finalized, the programme table will appear on the screen. In the programme table you will see the programme numbers and names assigned to the programmes. If you do not accept the locations and / or the programme names of programmes, you can change them from the Program Menu. (See page 14)

Operating The TV

You can operate your TV using both the remote control handset and the buttons on the set.
-901-ENG-3730W-CLE967 UK-HITACHI 37 INCH9TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15
Press the P+ button to select the next programme. Programme Selecting (direct access): Press digit buttons on the remote control handset to select programmes between 0 and 9. The TV will switch to the selected programme after a short delay. For a two digit programme number enter the second digit after pressing the first digit within 2 seconds.

Contrast

By pressing / button, select Contrast. Press ` button to increase contrast. Press _ button to decrease contrast. Contrast level can be adjusted between 0 and 63. Brightness By pressing / button, select Brightness. Press ` button to increase brightness. Press _ button to decrease brightness. Brightness level can be adjusted between 0 and 63. Sharpness By pressing / button, select Sharpness. Press ` button to increase sharpness. Press _ button to decrease sharpness. Sharpness level can be adjusted between 0 and 31. Colour By pressing / button, select Colour. Press ` button to increase colour. Press _ button to decrease colour. Colour level can be adjusted between 0 and 99. Hue This item is displayed in picture menu when the TV receives an NTSC signal. By press/ button, select hue. Press ` button ing to increase hue. Press _ button to decrease hue. Hue level can be adjusted between -31 and 31.

Menu System

Your TV has been designed with a menu system to provide easy manipulation of a multifunction system. button to enter the menu. Press the Press _ / ` button to select a menu title and then / button to select a menu item and _ / ` or OK button to enter the menu item.
Press the Press the menu.
button to exit the menu. button to return to the previous

Picture menu

By pressing _ / ` button, select the first icon. Picture menu appears on the screen.
QD8UVS@ Hqr8vrh 8h%! 7vtur!# Tuhr 8y"! 8yUrXh IvrSrqpvHrqv AvyHqr Pss "98i Pss Srr

Colour Temp

By pressing / button, select Colour Temp. Press _ / ` button to choose one of these options: Cool, Normal and Warm. Noise Reduction This item is used to reduce the image noise and improve the picture quality at weak signals. By pressing / button, select Noise Reduction. Press _ / ` button to set Noise reduction level to Off, Low, Medium or High.
By pressing / button, select Mode. Press _ / ` button to choose one of these options: Natural, Dynamic and Cinema. Picture mode can be changed directly by button. pressing the
- 10 01-ENG-3730W-CLE967 UK-HITACHI 37 INCH10 TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15
Film Mode Films are recorded at a different number of frames per second to normal television programmes. / button, select Film Mode. By pressing Press _ / ` button to set this feature On or Off. Turn this feature on when you are watching films to see the fast motion scenes clearly. 3D Comb 3D Comb is used to improve colour transitions and colour quality of pictures. / button, select 3D Comb. By pressing Press _ / ` button to set this feature On or Off. Reset By pressing / button, select Reset. Press _ / ` or OK button to reset the picture modes to factory default settings.
TPVI9 @hyvr TqHqr Vr !C $C $xC $xC
In equalizer menu the sound mode can be changed to User, Pop, Rock, Jazz, Flat and Classic by pressing _ / ` button. Equalizer menu settings can be changed only when Sound Mode is User. Select the desired fre/ button and increase or dequency by crease the frequency gain by pressing _ / ` button.

Sound menu

By pressing _ / ` button, select the second icon. Sound menu appears on the screen.

TPVI9 Wyr @hyvr 7hyhpr

Press the menu. Balance
button to return to the previous
By pressing / button, select Balance. Press ` button to increase balance to the right. Press _ button to increase balance to the left. Balance level can be adjusted between -31 and 31. Headphone By pressing / button, select Headphone. Press _ / ` or OK button to enter headphone menu.
Crhqur TqHqr Trr P 6WG Pss @ssrp Pss 9hvp7h P "9T Tisr Pss

Volume

Crhqur
By pressing / button, select Volume. Press ` button to increase volume level. Press _ button to decrease volume level. Volume level can be adjusted between 0 and 63. Equalizer By pressing / button, select Equalizer. Press _ / ` or OK button to enter equalizer menu. - 11 01-ENG-3730W-CLE967 UK-HITACHI 37 INCH11 TFT-TRIDENT-(LG)-50073600.p65

TqHqr Trr 7hyhpr

Sound Mode
/ button, select Sound By pressing Mode. Press _ / ` button to change the mode. You can select Mono, Stereo, Dual A or Dual B mode, only if the selected channel supports that mode. In case of bilingual broadcast (Dual Sound), you can select original or dubbed language using mode option. AVL Automatic Volume Limiting (AVL) function adjusts the sound to obtain fixed output level between programs, having different sound levels. Pressing _ / ` button will turn this feature on or off. Effect You can use this feature to switch the sound effect on or off. If the current sound system is Mono and the sound effect is switched on, then the sound will be heard as if it is Stereo. If the current sound system is Stereo, switching this effect on will give a more spatial effect. Pressing _ / ` button will turn this feature on or off. Dynamic Bass Dynamic Bass is used to increase bass effect of the TV set. By pressing / button, select Dynamic Bass. By pressing _ / ` button set Dynamic bass to Low, High or OFF. It is not recommended to select High if listening at high volume levels. There is a subwoofer output that can accept an active subwoofer if you wish to create very high levels of Bass.
SubWoofer It is possible to connect an external, active subwoofer to the set to give a much deeper bass effect. / button, select Subwoofer. By pressing Subwoofer can be set to On or Off. Set Subwoofer to On when you connect an external subwoofer to the set.

Feature menu

By pressing _ / ` button, select the third icon. Feature menu appears on the screen.

$QvHvv9Ti8rp

a / b but-
Use _ / ` button to adjust the value.
Tighten the screws of the Display cable until the connectors are fastened securely (finger-tighten only).
Select V Position item by using ton.
- 15 01-ENG-3730W-CLE967 UK-HITACHI 37 INCH15 TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15
Dot Clock Dot Clock adjustments correct interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Use _ / ` button to adjust the value. Phase Depending on the resolution and scan frequency that you input to the TV Set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method. Use _ / ` button to adjust the value.

Sound Menu

By pressing _ / ` button, select the third icon. Sound menu appears on the screen. The items in this menu are described at Sound menu starting page 11.

Feature Menu

By pressing _ / ` button, select the fourth icon. Feature menu appears on the screen. The items in this menu are described at Feature menu starting page 12.

PC Picture Menu

By pressing _ / ` button, select the second icon. PC Picture menu appears on the screen.
Q8QD8UVS@ 8h #% 7vtur" 8yUrIhy S B 7 Srr "! "! "!
Source menu appears on the screen.
Source Menu By pressing _ / ` button, select the fifth icon.

Sound in PC mode

Connect the PCs Audio output to the TVs PC Audio In socket with an audio cable.

Other Features

TV Status
Programme Number, Programme Name, Sound Indicator and Zoom Mode are displayed on the upper right side of the screen when a new programme is entered or button is pressed.
Contrast, Brightness and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu. When Colour Temp is Manual, you can also adjust the R,G,B items. R, G and B adjust the TV image colour in PC mode. You can change the TV colour to your desired colour: R (Red), G (Green), B (Blue) Select Reset and press _ / ` or OK button to reset the picture modes to factory default settings.

Mute Indicator

It is placed in the upper left side of the screen when enabled.
To cancel mute, there are two alternatives; button and the first one is pressing the the second one is increasing/decreasing the volume level.

- 16 01-ENG-3730W-CLE967 UK-HITACHI 37 INCH16 TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15

PIP and PAP modes

Press the button to switch to PIP mode. At PIP Mode, a small picture (PIP picture) is displayed on the main picture. There are 1 size and 4 positions (upper left, upper right, bottom left and bottom right) available for the button to PIP window. You can use change the PIP position. Aspect Ratio of the PIP window is fixed and 4:3. When PIP Mode is entered, the default active window is PIP window and the active window is indicated by a green frame around it. The active window can be changed by pressing the Yellow button. The status info OSD belongs to active window. The place of the status OSDs are same for both windows. For PIP picture restrictions, see table on page 27. Press the mode. button twice to switch to PAP
Auto: When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode according to the WSS signal. When the AUTO mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, change to another ZOOM mode manually. Full: This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.
At PAP Mode, two pictures with equal sizes are displayed on the screen. Aspect Ratios of the windows are fixed. When you switch to PAP Mode, Main window in PIP Mode is displayed on the right side of the screen. The active window can be changed by pressing the Yellow button. Source restrictions of PAP Mode are same as in PIP Mode. It is not possible to show 2 different channels from the TV tuner at the same time.
For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the Full mode to restore the picture to its original shape. 16:9 Zoom: This zooms up the wide picture (16:9 aspect ratio) to the full screen.
16:9 Subtitle: This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.

Freeze Picture

You can freeze the picture on the screen by pressing the button. At PIP and PAP layouts; only the main picture can be frozen.

Zoom Modes

To Stop Automatic Page Change
The teletext page you have selected may contain more information than what is on the screen; the rest of the information will be displayed after a period of time. button to stop the automatic Press the page change. button again to allow the next Press the page to be displayed.
If the programme being watched does not have Teletext transmission, no information will be displayed.

Fastext

Your TV supports the 1000 page Teletext system. When the page number of any of the 1000 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically. If the requested page is not in memory, the system will search for the requested page number and save the 1000 pages including the requested page into memory after finding it. Press the button to move the Teletext screen forward one page at a time. Press the button to move the Teletext screen backward one page at a time. For Fastext The subject-heading for the information may have a particular colour. Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly. For TOP text TOP text mode of operation will be activated automatically according to the transmission. If TOP text transmission is present, colour coded buttons will appear in status row. If TOP text transmission is not present, status row will not appear. The subject-heading for information may be located in coloured box. In Top mode the or commands will request the next or previous page respectively. If TOP text transmission is not available, in case of operation of these commands, wraparound occurs. For example page 100 appears to be one greater than page 199.

To Select A Subcode Page

Subcode pages are subsections of long Teletext pages that can only be displayed on the screen one section at a time. Select the required Teletext page. Press the button. Select the required subcode page number by pressing four digit buttons (e.g. 0001). If the selected subcode page is not displayed button. TV in a short time, press the programme will be displayed on the screen. Teletext page number will be displayed on the upper left corner of the screen when the selected page is found. button to display the selected Press the Teletext page.

PAT (Picture and Text)

Press the RED ( ) button to see the programme and teletext at the same time. The screen will be divided into two parts. Teletext will be displayed on the left side of the screen.

To Exit Teletext

Press the button. The screen will switch to TV mode.

To Display The Time

While watching a TV programme with Telebutton. The text transmission press the current time information, captured from Teletext will be displayed on the screen.
- 19 01-ENG-3730W-CLE967 UK-HITACHI 37 INCH19 TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15

You can not hear any sound. Did you perhaps interrupt the sound, pressing the button? Sound is coming from only one of the speakers.Is the balance set to one extreme? See Sound menu.

Poor Picture

Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or Teletext unrecognisable? Check if you have entered the correct frequency. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.

Remote Control

Your TV no longer responds to the remote control. Perhaps the batteries are exhausted. If so you can still use the local buttons at the bottom of the TV. Have you selected the wrong menu? Press button to return to TV mode or press the button to return to the previous menu. the

No solution:

Switch your TV set off and on. If this does not work, call the service personnel; never attempt to repair it yourself.

No Picture

Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer. No Picture could mean that your TV is not receiving a transmission. Have you selected the correct button on the remote control?Try once more.
- 23 01-ENG-3730W-CLE967 UK-HITACHI 37 INCH23 TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15

Specifications

TV BROADCASTING PAL/SECAM B/G D/K K' I/I' L/L' RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20/ S21-S41) NUMBER OF PRESET CHANNELS CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz. AUDIO German+Nicam Stereo AUDIO OUTPUT POWER (WRMS.) (%10 THD) 2x8 POWER CONSUMPTION (W) (max.) 180 W < 3 W (Stand-by) PANEL 16:9 display, 37 Screen Size DIMENSIONS (mm)

9DH@ITDPIT 9 G C

Xrvtuxt vuhq
- 24 01-ENG-3730W-CLE967 UK-HITACHI 37 INCH24 TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15
Appendix A: PC Input Typical Display Modes
The display has a maximum resolution of 1366x 768, vertical sync. frequency range of 56-85 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes.
H qr S r y v C v hy W rvphy Ar r p C xC WrC
%# ! " # $ % & ' ( %# '#' %# %# %# ' ' ' ' ' ! " # $ % & ' ( ! !# !# !# !# $! !' !' !' "%%

# #' #' #' #' #' % % % % % &%' &%' &%' &%' '%# !# &%' &%' &%'

" " "

& % % &! &$ '$ $% % &! &$ '$ % & &$ '$ &$ % % & %
"&( "&$ #"" "$! "&( #' #%( $"& #'# $%$ % %'& %&$ %# #&' $% #&&
* Only available in Full and PAP modes, not in 4:3 mode.
- 25 01-ENG-3730W-CLE967 UK-HITACHI 37 INCH25 TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15
Appendix B: DVD Player Selection
You can use this remote control to operate the selected brand of DVD player by pressing the following buttons on the remote control simultaneously.
7hqs9W9Qyhr Cvhpuv Qvrr Qhhvp Uuvih Quvyv EW8 Tht T Qr DIAP DIAP DIAP DIAP DIAP DIAP DIAP DIAP ! " # $ % & ' 7hqs9W9Qyhr S86 Hvivuv Px arvu Pv Tuvp Txu 7ix Qr DIAP DIAP DIAP DIAP DIAP DIAP DIAP DIAP ( DI9@Y HDY TV7Q6B@ VQ96U@ S@W@6G UWU@YU
Example To operate HITACHI DVD player, press and hold the INFO button, followed by the 1 button.

UWU@YUi

TV7Q6B@i DI 9@Yi

VQ96U@i HDYi S@W@6Gi

Note: Not all models of the listed brands can be operated using this remote control.
- 26 01-ENG-3730W-CLE967 UK-HITACHI 37 INCH26 TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15
01-ENG-3730W-CLE967 UK-HITACHI 37 INCH27 TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15
Appendix C: Main and PIP-PAP Picture Combinations

(;7 &9%6

(;7 5*%

(; 7 &9%6

(;7 <3E3U

(;69+6

(;7 +'0 ,

3&

Q D Q Q 6Q
@YU 8W7T @YU SB7 @YU ! 8W7T

Q D Q

Q 6 D T @ Y U $

- 27 -

@YU ! SB7 @YU " ` Q iQ @YU # 8W7T @YU #T TWCT @YU $ C9HD Q8
Y)Ih h vyh iyr P)6 h vyh iyr

UK Guarantee

Your Guarantee of Excellence
Thank you for purchasing this Hitachi Television. In the unlikely event that this product should develop a fault, we undertake to replace or repair any part of the product which fails due to a manufacturing defect within 12 months of the date of purchase provided that: i) The product has been installed and used only in accordance with the instructions supplied with the product ii) The product has not been repaired, maintained, or modified by any person other than an Hitachi authorised engineer iii) The product serial number has not been removed or altered

This guarantee does not apply to product acquired second hand or for commercial or communal use This guarantee does not cover the replacement of exhausted batteries, the adjustment of user controls, or aerial alignment. Any parts replaced under this guarantee shall become the property of Hitachi Europe Ltd. Please note that evidence of the date of purchase will be required before any service under this guarantee is carried out.
THIS GUARANTEE DOES NOT AFFECT YOUR STATUTORY RIGHTS.
IN ALL CASES OF DIFFICULTY PLEASE CONSULT YOUR HITACHI DEALER
- 28 01-ENG-3730W-CLE967 UK-HITACHI 37 INCH28 TFT-TRIDENT-(LG)-50073600.p65 25.10.2005, 16:15

QUICK GUIDE GB 37LD6600

IMPORTANT - If placing TV into cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides, rear and top of the TV. This is to allow for adequate ventilation during operation. Please read the main Users Guide for more safety information before installation.
insert the batteries into your handset

Rear view

either connect the aerial straight to your TV.

Aerial (RF) Lead

wall socket Aerial (RF) Socket
.or connect the aerial through a VCR.

TFT-LCD TV

Aerial (RF) Socket
(RF) connector lead VCR to TV wall socket
Optional Scart Lead Aerial (RF) Socket VCR TV to VCR

ANT.IN

It is recommended that a scart lead should be fitted between your TV and VCR to enhance your picture and sound quality. Scart leads are essential if you have a stereo TV and VCR and wish to obtain stereo sound from your equipment. These leads can be purchased from your Hitachi dealer or any good High Street electrical retailer.
.or through a satellite decoder.

Aerial

RF Lead from Satellite to TV
Scart Lead to EXT-1 on TV.
RF Lead to Aerial Satellite LNB lead
.or through a VCR and satellite decoder.

RF Lead from VCR to TV

RF Lead from VCR to Satellite Aerial

RF Lead to Aerial

Satellite LNB lead
connect the TV plug to the mains socket

UAUQ6I@G

%T8S@XT H#'

APPU6TT@H7G`

),*85(

- 33 GXYDUDPRQWDM',/S

X6GGC6IB@ST
T8S@X #" QG6TUD86I8CPS &"

QG6TUD8QDIT

X6GGC6IB@S
Attention: Only the original wall bracket should be used with this product

- 34 GXYDUDPRQWDM',/S

Hitachi, Ltd. Consumer Business Group Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan HITACHI EUROPE LTD. Consumer Affairs Department PO Box 3007 Maidenhead Berkshire SL6 8ZE UNITED KINGDOM Tel: 4405 Email: consumer.mail@hitachi-eu.com HITACHI EUROPE S.A. 364, Kifissias Ave. & 1, Delfon Str. Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835694 Email: service.hellas@hitachi-eu.com
HITACHI EUROPE GmbH Munich Office Dornacher Strasse 3 D-85622 Feldkirchen bei Mnchen GERMANY Tel: 089-991 80-0 Fax: 089 - -224 Hotline: 0180 - 51 (12ct/min.) Email: HSE-DUS.Service@Hitachi-eu.com
HITACHI EUROPE S.A. Gran Via Carles III, 86 Planta 5 Edificios Trade - Torre Este 08028 Barcelona
Tel: 2550 Fax: 3513 Email: rplan@hitachi-eu.com
HITACHI EUROPE S.r.l. Via T. Gulli n.MILAN
Tel: Fax: Servizio Clienti Tel. Email: customerservice.italy@hitachi-eu.com
HITACHI EUROPE AB Box 77 S-KISTA SWEDEN Tel: Fax: Email: csgswe@hitachi-eu.com
HITACHI EUROPE S.A.S Lyon Office B.P. 45, 69671 Bron Cedex FRANCE Tel: 70 Fax: 99 Email: france.consommateur@hitachi-eu.com
HITACHI EUROPE LTD. Norwegian Branch Office Strandveien Dysaker NORWAY Tel: Fax: Email csgnor@hitachi-eu.com
www.hitachidigitalmedia.com

50079319

HITACHI EUROPE LTD. Benelux Branche Office Bergensesteenweg Sint-Pieters-Leeuw BELGIUM TEL : 0032/FAX: 0032/Email : info@hitachi.be