Subwoofer Out PC Audio Input Aerial Scart 2 (AV-2) Scart 1 (AV-1) HDMI Input (AV-5) Component Audio Inputs s Component Video (YPbPr) Inputs VGA Input CI Slot AV-3

Preparation

For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in tropical and/or moderate climates.
When no valid signal is detected, after 5 minutes the TV switches itself automatically to stand-by mode. PLL (Channel Search) PC Input (Support up to SXGA 1280 x 1024) Stereo PC Audio Input Plug&Play for Windows 9X, ME, 2000, XP 3D Comb Filter Audio Line Out

Features

Remote controlled colour television. Fully integrated Digital TV (DVB-T) 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system. It has 2 Scart sockets for external devices (such as video, video games, audio set, etc.) 3DS Virtual Surround Sound Stereo sound system (German+Nicam). Full function Teletext. Fastext (1000 Pages), TOP text. Headphone connection. Direct channel access. A.P.S. (Automatic Programming System). All programmes can be named. Forward or backward automatic tuning. Sleep timer. Child Lock. Automatic sound mute when no transmission. NTSC Playback. AV in and S-VHS in are available. It has VGA connector for external devices such as computer. It has an HDMI connector for Digital Video and Audio. This connection is also designed to accept High Definition signals. It has PIP / PAP / PAT functions. AVL (Automatic Volume Limiting) TV Picture in PC

Panel Features

42-inch PLASMA display. High resolution (1024x1080) Contrast ratio (4000:1 typical) Brightness (typical) 1400 cd/m2. Display colour 16.77 Million.

Safety Precautions

Please read the following recommended safety precautions carefully for your safety
IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV

Dos and Donts

This Television has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO consult your dealer if you are in any doubt about installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. This TV is supplied with a fitted mains plug. This plug must not be cut off as it may contain a special radio interference filter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appro-5-

- 10 -

Everyday Operation (DIGITAL TELEVISION)
Pressing the DTT/TV button at any time while watching television programmes will switch the TV set between the digital terrestrial television broadcasting and the analogue broadcasting.
ELECTRONIC PROGRAMME GUIDE (EPG)
Some, but not all, channels send information about the current and next events. Please note that event information is updated automatically. If there is no event information data available for channels, only channel name with No Information Available banner is displayed. Press menu. (GUIDE) button to view the EPG

Information Banner

Whenever you change the channel using the P + or P - buttons or the number buttons, TV displays the channel picture along with an information banner at the bottom of the screen. This will remain on the screen for approximately three seconds. The information banner can also be displayed by pressing the button at any time while watching the TV. Pressing the button again removes the banner.

4 CH 48 Now: Next: RTL

Signal :
or buttons to navigate in Chan Press nels or Programmes. Press or buttons to navigate through the channel and programme list. In EPG Menu, you can easily see the extended help information by pressing the button and by pressing this button again you can close this window.
Electronic Programme Guide Wed 31/7 09:13

04:35-11:00 11:00-17:55

NEWS NEWS

10:00-11.00

The information banner gives a number of facts on the channel selected and the programme on it: The name of the channel is displayed along with its channel list number and an indication of the strength of the signal received on this channel. The current and next programme information are given with the start and finish time. The current time information is displayed along with channel name. Hint Not all channels broadcast the programme data. If the name and times of the programme are not available then No Information Available is displayed in the information banner. If the selected channel is locked, you must enter the correct four digit key to view the channel.

Enter Lock Key

1. ONE 2. BBC TWO 5. five 5. FIVE
Commonwealth Nachrighten Driven Crazy Clifford The Big Red Dog The Chart Dawsons Creek The Chart Dawsons Creek
Navigate Schedule OK Watch More
In the EPG Menu all channels are displayed. The current channel is highlighted when you enter the EPG menu.Use or buttons to change the channel. Also press RED or GREEN buttons to make page up/ down scroll for the channels. And press SELECT button to watch the highlighted channel. If you highlight an event, short event description, extended event description, start and finish time of the event are displayed on the screen. If you press OK button when a next event is highlighted, a reminder is set for the highlighted programme and a clock icon ap-

- 11 -

pears across the highlighted channel line as shown in the following EPG menu figure. Programme reminders is set to signal that a programme is about to start when you are watching another channel. If you set reminder to a programme, then you will be asked for switching to that channel when the reminder time is reached.
Electronic Programme Guide

News 10:00-11.00

Displaying The Subtitles
With Digital terrestrial broadcasting (DVB-T), some programmes are broadcast with subtitles. Subtitles can be displayed when watching these programmes. Whenever GREEN button is pressed, Subtitle selection OSD will be displayed on the screen. You can set Subtitles as ON or OFF. For Subtitle Language options, refer to Language Settings in the Configuration Menu section.

Wed 31/7 09:13

TELETEXT
Use of teletext and and its functions are identical to the analogue text system. Please do refer to the Analogue teletext explanations. Note: When subtitles are set to ON, teletext service cannot be used in the Digital Mode. To enable teletext, set subtitles OFF.

Navigate

Schedule

Reminder

By pressing the BLUE button you can view the extended schedule of the programmes. By pressing the button you can see the detailed help information easily. And by pressing button again you can exit Help menu. By pressing the BLUE button, the following EPG Menu appears on the screen.
BBC ONE 1. BBC ONE 2. BBC TWO 5. Five 7. BBC Choice 11.DISCOVERY 15.BBC NEWS 24 17.BBCi TUE 21/4, 20:00-22:00

Wed 21/4 10:12

IDTV Menu System
The IDTV Menu can only be shown when watching Digital terrestrial broadcasting. Press the DTT/TV button to turn the IDTV on while TV is in the analogue mode.

1. Press MENU button.

The menu below appears on the screen:

No Information Available

Main Menu
Channel List Installation Configuration

Change Time

Advance Day
Timers TV Setup Common Interface
By pressing YELLOW/BLUE button, you can advance the schedule backward / forward of a day. By pressing RED or GREEN buttons you can change the schedule time. If you press button you can see the detailed help information easily. And by pressing button again you can exit Help menu.

Channel List

Using or buttons on the remote control in Main menu, make sure that the first item, Channel List, is highlighted and press the OK button to display the Channel List.

- 12 -

The following operations can be performed in this menu: 1. Navigating the whole list of channels 2. Moving channels * 3. Deleting channels 4. Renaming channels 5. Adding locks to channels 6. Setting favourites * Depending on your selection of Country in the first time installation, MOVE option of the Channel List may not be visible.
CHANNEL LIST 1. BBC ONE 2. BBC TWO 3. ITV 8 4. Channel 4 5. BBC THREE 6. Teletext 7. BBC FOUR 8. Sky Travel 9. UKHistory 10. RTL

Select Move Delete

BBC ONE

Edit Name

SELECT OK

Favourites i More

Function

Select Channel

Press OK button, the selected channel becomes highlighted. or buttons to select the new Use position of the channel and press OK button to place the channel to the selected position and return the menu.
Deleting the channels in the channel list Press or buttons to select the channel that will be deleted.

Favourites

SELECT Select Channel
Press or buttons to select the Delete item on Channel List menu. As seen on Channel List menu, Delete is written next to OK at the bottom of the screen to indicate that pressing OK button will delete the highlighted channel in the channel list.
Navigating the whole channel list or keys for selecting the previ Press ous or next channel. You can press RED or GREEN buttons to move the page up or page down. To watch a specific channel, highlight it using or buttons and then press OK button, while the Select item on Channel The List menu is highlighted via using buttons. Moving the channels in the channel list or buttons to select the chan Press nel that will be moved. Press or buttons to select the Move item on Channel List menu. Move is written next to OK item to indicate that press OK to move the highlighted channel to the desired position on the channel list. or

Select ChannelSELECT

Delete

i More

Press OK button to delete the highlighted channel in the channel list. Then the message below appears on the screen.
The selected service will be permanently deleted, and favourite list will be turned off. Are you sure? Yes No

- 13 -

Press or sired option.
buttons to highlight the de-
press theOK button, a password box is displayed.
If OK button is pressed while Yes is highlighted, the highlighted channel is deleted. Selecting No cancels the delete operation. Renaming channels To rename a specific channel, the channel must be highlighted via pressing or buttons and then highlight the Edit Name or buttons. Press item by pressing OK button to activate rename feature.

Select Channel SELECT

Lock/Unlock
Setting Favourites You can set various channels as favourites so that only the favourite channels are navigated. To set a favourite you should highlight the Favourites item at bottom of the Channel List menu. To set a favourite you should highlight the Favourites item at bottom of the Channel List menu, and then pressing OK key, Edit Favourite Lists menu appears on the screen. You can list your favourite channels using List 1, List 2, List 3, List 4 or List 5. Using 5 lists enables listing channels for diffrerent categories (sport, music etc.). And by activating the favourites list number that you want in Favourite Mode submenu of Configuration menu, you enable only the channels in the selected list. Configuration menu is entered from the Main Menu.

Type: Name: Start: End: Date: Mode:
TV 3. ITV 00:00 00:00 03/06/2005 Once
standby, the timer recording will be cancelled; the timer setting will be deleted and the desired programme will not be recorded.

TV Setup

To be able to go through TV functions, you can use this item. The digital TV Setup menu screen is accessed from the Main Menu. Press the button to display the Main Menu and use or buttons to highlight TV Setup. Press OK button to display TV Setup menu screen.
Here the six settings of channel type, channel name, start time, end time, date and frequency mode can be set. You can move freely between each setting using or buttons. or but The channel type is set using tons. It enables displaying only the selected type channels. The channel name is set using or buttons to display the channel which broadcasts the programme. The start time, end time and date are each set with the number buttons on the remote control in 24-hour format. The frequency mode determines how often the receiver operates this event and is set with the or buttons to be either Once, Daily, or Weekly. Press OK button to complete setup.
Detailed information for all menu items is in AnalogueTV Menu System section.
Hint If an invalid number for the start or end times or the date is entered, Entered time is not valid message appears on the menu.

Common Interface

Press button to display the Main Menu and use the or buttons to highlight the Common Interface line and press OK button.
RECORDINGFROM IDTV Connect your VCR to AV2 via a scart lead. Set the AV2-OUT in the feature menu to DDT, as illustrated and described on page 24. Set the time as described above. Set your TV to standby using the remote control. Set your VCR to correspond with the time set on your TV and select external input (refer to your VCR instruction book). NB. If you switch on your TV whilst the timer recording is active and then switch back to
It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial broadcasting.

Analogue TV Menu System

Your TV has been designed with a menu system to provide easy manipulation of a multifunction system. Press the button to enter the menu. Press / button to select a menu title and then / button to select a menu item and / or OK button to enter the menu item. Press the Press the menu. button to exit the menu. button to return to the previous

- 21 -

Hue This item is displayed in picture menu when the TV receives an NTSC signal. By pressing / button, select hue. Press button to increase hue. Press button to decrease hue. Hue level can be adjusted between -31 and 31. Colour Temp By pressing / button, select Colour Temp. Press / button to choose one of these options: Cool, Normal and Warm. Noise Reduction This item is used to reduce the image noise and improve the picture quality at weak signals. By pressing / button, select Noise Reduction. Press / button to set Noise reduction level to Off, Low, Medium or High. Film Mode Films are recorded at a different number of frames per second to normal television programmes. By pressing / button, select Film Mode. Press / button to set this feature On or Off. Turn this feature on when you are watching films to see the fast motion scenes clearly. 3D Comb 3D Comb is used to improve colour transitions and colour quality of pictures. By pressing / button, select 3D Comb. Press / button to set this feature On or Off. Reset / button, select Reset. By pressing Press / or OK button to reset the picture modes to factory default settings. Volume / button, select Volume. By pressing Press button to increase volume level. Press button to decrease volume level. Volume level can be adjusted between 0 and 63. Equalizer By pressing / button, select Equalizer. Press / or OK button to enter equalizer menu.
SOUND Equalizer Sound Mode 120Hz 500Hz 1.5kHz 5kHz 10kHz User 0 SOUND Volume Equalizer Balance Headphone Sound Mode AVL Effect Dynamic Bass 3DS Subwoofer Stereo On Off Off On Off

Sound menu

By pressing / button, select the second icon. Sound menu appears on the screen.
In equalizer menu the sound mode can be changed to User, Pop, Rock, Jazz, Flat and Classic by pressing / button. Equalizer menu settings can only be changed when Sound Mode is User. Select the desired frequency by / button and increase or decrease the frequency gain by pressing / button. Press the menu. button to return to the previous

- 22 -

Balance / button, select Balance. By pressing Press button to increase balance to the right. Press button to decrease balance to the left. Balance level can be adjusted between -31 and 31. Headphone By pressing / phone. Press / hedphone menu. button, select Heador OK button to enter
Sound Mode By pressing Mode. Press mode. / / button, select Sound button to change the
You can select Mono, Stereo, Dual A or Dual B mode, only if the selected channel supports that mode. In case of bilingual broadcast (Dual Sound), you can select original or dubbed language using mode option. AVL
SOUND Headphone Volume Sound Mode Balance 10 Stereo 0
Automatic Volume Limiting (AVL) function adjusts the sound to obtain fixed output level between programs, having different sound levels. Pressing or off. Effect You can use this feature to switch the sound effect on or off. If the current sound system is Mono and the sound effect is switched on, then the sound will be heard as if it is Stereo. If the current sound system is Stereo, switching this effect on will give a more spatial effect. Pressing or off. / button will turn this feature on / button will turn this feature on
volume / button, select Volume. By pressing Press button to increase hp volume level. Press button to decrease hp volume level. Headphone volume level can be adjusted between 0 and 63. sound mode By pressing Mode. Press mode. / / button, select Sound button to change sound
Dynamic Bass Dynamic Bass is used to increase bass effect of the TV set. By pressing / button, select Dynamic Bass. By pressing / button set Dynamic bass to Low, High or OFF. It is not recommended to select High if listening at high volume levels. There is a subwoofer output that can accept an active subwoofer if you wish to create very high levels of Bass. 3DS This feature is used to create the impression that sound is coming from around the room instead of from the set speakers. Pressing the / buttons will turn the feature on or off.
Sound mode is used to identify sound mode of the headphone and can be set to mono, stereo, dual a or dual b according to the transmission. balance By pressing / button, select Balance. Press button to increase balance to the right. Press button to decrease balance to the left. Balance level can be adjusted between -31 and 31. Press the menu. button to return to the previous

- 23 -

The first letter of the selected name starts to blink. Press / button to change that letter and / button to select the other letters. By pressing the RED button, you can store the name. Insert: Select the programme which you want to insert by navigation buttons. Press the GREEN button. By navigation buttons move the selected programme to the decided programme space and press the GREEN button again. Delete: To delete a programme, press the YELLOW button. Pressing the YELLOW button again erases the selected programme from the programme list, and the programmes below shift one up. APS (Automatic Programming System) When you press the BLUE button for APS, the following warning screen will be displayed.

PROGRAM Country UK

Program menu
By pressing / button, select the fifth icon. Program menu appears on the screen.
PROGRAM ITV ZDF CH5 C - 02 C - 05 C - 06 C - 08 C - 21 C - 23 C - 20
C - 43 C - 64 C - 68 S - 40 ------------------------Insert APS
WARNING ! All prestored programs will be deleted
By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except the AV mode). By cursor action, programme selection is done automatically. Name: To change the name of a decided programme, select the programme and press the RED button.
Press the BLUE button to cancel APS if you d o n o t wan t t o d e l e t e yo u r e xi s t i n g programme list. To continue APS, first select the country by pressing / button and then press the RED or OK button.
After APS is finalized, the programme table will appear on the screen.

- 26 -

Source menu
By pressing / button, select the sixth icon. Source menu appears on the screen.

PC Picture Position Menu

By pressing / button, select the first icon. PC Picture Position menu appears on the screen.
PC PICTURE POSITION Autoposition H Position V Position Dot Clock Phase 50 50
SOURCE : TV TV / DTT AV - 1 AV - 2 AV - 3 AV - 4 AV - 4S AV - 5 PC RGB
In source menu, highlight a source by pressing / button and switch to that mode by pressing / or OKbutton.

1024x768 H:48kHz V:60Hz

Autoposition If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically. Select Autoposition item by using buttons. /

PC Mode

Power off both Computer and Display before making any connections. Set your PCs resolution correctly before connecting to the TV. See the table on page 37 for supported modes. Use a D-SUB cable to connect the TVs PC input to the computers RGB output terminal.
15 Pin Mini D-Sub Connector
Press or OK button. Warning: Auto position adjustment recommended to be done with the full screen image for the proper adjustment. H (Horizontal) Position This item shifts the image horizontally to right hand side or left hand side of the screen. Select H Position item by using ton. Use / V (Vertical) Position / but-

button to adjust the value.
Tighten the screws of the Display cable until the connectors are fastened securely (finger-tighten only).
This item shifts the image vertically towards the top or bottom of the screen. Select V Position item by using ton. Use / button to adjust the value. / but-

Menu System in PC mode

Press the button. The menu will be displayed in the middle of the screen.

- 27 -

Dot Clock Dot Clock adjustments correct interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Use Phase Depending on the resolution and scan frequency that you input to the TV Set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method. Use / button to adjust the value. / button to adjust the value.

Sound Menu

By pressing / button, select the third icon. Sound menu appears on the screen. The items in this menu are described at Sound menu starting page 22.

Feature Menu

By pressing / button, select the fourth icon. Feature menu appears on the screen. The items in this menu are described at Feature menu starting page 24.

Source Menu

By pressing / button, select the fifth icon. Source menu appears on the screen. In source menu, highlight a source by pressing / button and switch to that mode by pressing / or OKbutton.

PC Picture Menu

By pressing / button, select the second icon. PC Picture menu appears on the screen.
PC PICTURE Contrast Brightness Colour Temp R G B Reset Normal 32

Sound in PC mode

Connect the PCs Audio output to the TVs PC Audio In socket with an audio cable.
Contrast, Brightness and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu. When Colour Temp is Manual, you can also adjust the R,G,B items. R, G and B adjust the TV image colour in PC mode. You can change the TV colour to your desired colour: R (Red), G (Green), B (Blue) Select Reset and press / or OK button to reset the picture modes to factory default settings.

- 28 -

Other Features

TV Status

Programme Number, Programme Name, Sound Indicator and Zoom Mode are displayed on the upper right side of the screen when a new programme is entered or button is pressed.

Zoom Modes

Zoom mode can be changed by pressing the button. You can change the screen size according to the picture aspect ratio. Select the optimum one from the following ZOOM modes.

Note: You can only choose 4:3 and FULL in PC mode.

Mute Indicator

It is placed in the upper left side of the screen when enabled.
Auto: When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode according to the WSS signal. When the AUTO mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, change to another ZOOM mode manually. Full: This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.
To cancel mute, there are two alternatives; button and the first one is pressing the the second one is increasing/decreasing the volume level.

PIP and PAP modes

Press the button to switch to PIP mode. At PIP Mode, a small picture (PIP picture) is displayed on the main picture. For PIP picture restrictions, see table on page 40. Press the mode. button twice to switch to PAP
At PAP Mode, two pictures with equal sizes are displayed on the screen. Aspect Ratios of the windows are fixed. When you switch to PAP Mode, Main window in PIP Mode is displayed on the right side of the screen. Source restrictions of PAP Mode are same as in PIP Mode.
For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the Full mode to restore the picture to its original shape. 16:9 Zoom: This zooms up the wide picture (16:9 aspect ratio) to the full screen.

Freeze Picture

You can freeze the picture on the screen by pressing the button. At PIP and PAP layouts; only the main picture can be frozen.
16:9 Subtitle: This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.

- 29 -

Teletext
Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index).
Default Zoom Modes: 4:3 Use to view a normal picture (4:3 aspect ratio) as this is its original shape.

To Operate Teletext

Select a TV station where Teletext is being transmitted. button. Usually the list of con Press the tents (index) is displayed on the screen.
14:9 Zoom: This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.

Use the stereo headphone socket at the rear side of the TV, to connect headphones.

Connecting Subwoofer

Use Subwoofer Out socket to connect an external, active subwoofer to the set to give a much deeper bass effect.

- 33 -

Aerial Connection
Outdoor Aerial Connection
Round 75 ohm coaxial cable

Rear of TV

either connect the aerial straight to your TV.

Rear view

.or connect the aerial through a VCR.

PLASM A TV

Sca rt 3

Aerial (RF) Socket

Sca rt 1

Scart 2

(RF) connector lead VCR to TV Aerial (RF) Socket VCR

Aerial (RF) Lead

wall socket

Scart 1

AN T. IN
It is recommended that a scart lead should be fitted between your TV and VCR to enhance your picture and sound quality. Scart leads are essential if you have a stereo TV and VCR and wish to obtain stereo sound from your equipment. These leads can be purchased from your Hitachi dealer or any good High Street electrical retailer.or through a VCR and satellite decoder.

PLASMA TV

.or through a satellite decoder.
RF Lead from VCR to TV Scart Lead to AV-1 on TV.
RF Lead from Satellite to VCR Aerial

A NT.IN

Aerial
RF Lead from Satellite to TV

RF Lead to Aerial

Scart Lead to EXT-1 on TV.

Satellite LNB lead

ANT IN

headphone connection

camcorder connection

Headphone Audio Inputs

Headphone
Video Input S-VHS Input Audio Inputs Headphone

DC Input

A/V Input / Output

- 34 -

Care Of The Screen
Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.

Remote Control

Your TV no longer responds to the remote control. Perhaps the batteries are exhausted. If so you can still use the local buttons at the bottom of the TV. Have you selected the wrong menu? Press the button to return to TV mode or press the button to return to the previous menu.

Poor Picture

Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or Teletext unrecognisable? Check if you have entered the correct frequency. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.

No solution:

Switch your TV set off and on. If this does not work, call the service personnel; never attempt to repair it yourself.

start A.P.S. (Auto Programming System)
1 When the TV is turned on for the first time, the menu for the language selection
appears on the screen. The message Welcome please select your language! is written in all language options sequentially in the menu on the screen. By pressing or buttons highlight the language you want to set and press OK. After then, First time Installation Menu will appear on screen. By pressing or buttons, select country item you want to set and press OK
2 After the First Time Installation

screen.

is set, the following message appears on the
3 To start automatic search, select Yes, to cancel select No. This process will
take about five minutes. To cancel searching, you can press time during the process. button at any
4 After Automatic Search process is completed, a message asking for analogue
channel search appears on the screen. To continue APS, first select the language and country by pressing _ / ` button and then press the RED or OK button.
5 After APS is finalized, the programme table will appear on the screen.For details
Program menu please refer to the Installation Menu section of the instruction book.

UK - I

APS is running. 055,25 Mhz Cancel

important note.

Once the TV has found all your local stations, they are then automatically assigned a programme numberand name, if available from the broadcast.
Hitachi Ltd. Consumer Business Group
Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan
HITACHI EUROPE LTD. Consumer Affairs Department PO Box 3007 Maidenhead Berkshire SL6 8ZE HITACHI EUROPE S.A. 364, Kifissias Ave. & 1, Delfon Str. Chalandri Athens

GREECE

Tel: 1 - 6837200 Fax: 1 - 6835694 Email: dmgservice.gr@hitachi-eu.com

UNITED KINGDOM

Tel: 4405 Email: consumer.mail@hitachi-eu.com
HITACHI EUROPE GmbH Munich Office Dornacher Strasse 3 D-85622 Feldkirchen bei Mnchen
HITACHI EUROPE S.A. Gran Via Carles III, 86 Planta 5 Edificios Trade - Torre Este 08028 Barcelona
Tel: 089-- 0 Fax: 089 - - 224 Hotline: 0180 - 51 (12ct/min.) Email: dmg-mun.service@hitachi-eu.com
Tel: 2550 Fax: 3513 Email: atencion.cliente@hitachi-eu.com