Hitachi Power Tools

JIG SAW Model CJ 110MVA

LIST NO. E515

ELECTRIC TOOL PARTS LIST

507 508

ITEM NO. * * * * 17 * * * * * * * * * * * * 27 * * 41

--- 2 ---

CJ 110MVA
CODE NO. 325-419 930-153 325-415 325-416 960-356 325-417 325-418 984-528 301-653 960-356 953-327 937-631 984-750 321-594 959-140 305-499 938-307 955-509 302-488 325-566 SUPPORT (B)
DESCRIPTION HOUSING (A).(B) SET PRINTED CIRCUIT BOARD (LED LIGHT) PRINTED CIRCUIT BOARD (LED LIGHT) TERMINAL (A) M3.5 (10 PCS.) CONTROLLER 120V CONTROLLER 230V-240V O-RING (P-6)
TAPPING SCREW (W/FLANGE) D4X20 (BLACK)

NO. USED

REMARKS
FOR USA, CAN EXCEPT FOR USA, CAN 1 EXCEPT FOR USA, CAN 1 (CORD ARMOR D8.8) 1 (CORD ARMOR D8.8) FOR FIN, NOR, SWE, DEN 1 (CORD ARMOR D8.8) FOR NZL, AUS 1 (CORD ARMOR D8.8) FOR USA, CAN 1 (CORD ARMOR D8.8) FOR SUI INCLUD. 21, 1 FOR USA, CAN 1
* ALTERNATIVE PARTS 12 -- 05
NAME PLATE TERMINAL (A) M3.5 (10 PCS.) CORD ARMOR D8.8 CORD CLIP TAPPING SCREW (W/FLANGE) D4X16 SLIDE BAR CONNECTOR 50091 (10 PCS.) MACHINE SCREW (W/WASHER) M3.5X6 PILLAR TERMINAL SWITCH (1P SCREW TYPE) EARTH TERMINAL NOISE SUPPRESSOR
500-234Z CORD 500-247Z CORD 500-439Z CORD 500-240Z CORD 500-447Z CORD 608-VVM BALL BEARING 608VVC2PS2L 360-764U ARMATURE ASSY 120V 360-764E ARMATURE 230V 360-764F ARMATURE 240V 340-666D STATOR 120V 340-666E STATOR 230V-240V 323-420 608-VVM 999-041 955-203 311-741 960-356 325-078 325-083 325-414 325-082 321-592 325-079 321-580 325-080 325-081 325-071 983-564 325-070 325-072 RUBBER RING BALL BEARING 608VVC2PS2L CARBON BRUSH (1 PAIR) BRUSH HOLDER TERMINAL TERMINAL (A) M3.5 (10 PCS.) FRONT COVER
TAPPING SCREW (W/FLANGE) D4X12 (BLACK)
SLIDE KNOB LIGHT BAR FENCE
MACHINE SCREW (W/SP. WASHER) M4X8 (BLACK)
LEVER SPRING LEVER LEVER BOLT PLATE SPRING PIN D6 PLUNGER HOLDER (A) PLUNGER
ITEM NO. 68 CODE NO. 994-251 325-069 325-242 325-068 325-067 325-066 957-540 325-061 673-489 325-064 325-063 325-062 325-241 325-077 325-076 325-073 325-075 325-074 315-500 321-576 321-573 321-575 949-665 983-545 325-065 982-454 959-155 DESCRIPTION RETAINING RING FOR D7 SHAFT CONNECTING PIECE NEEDLE BEARING GEAR BALANCE WEIGHT ORBITAL CAM WASHER (A) GEAR HOLDER RETAINING RING (E-TYPE) FOR D5 SHAFT BLADE ROLLER ROLLER HOLDER NEEDLE ROLLER SEAL LOCK HEX. SOCKET HD. BOLT M3X8 SEAL LOCK HEX. SOCKET HD. BOLT M3X6 BLADE HOLDER PLUNGER HOLDER (B) PACKING COVER PACKING
MACHINE SCREW (W/WASHER) M4X8 (BLACK) NO. USED
RUBBER BUSHING BASE BASE LOCKER HEX. SOCKET HD. BOLT M5X14 (10 PCS.) NEEDLE ROLLER CHANGE KNOB SPRING (C) STEEL BALL D3.97 (10 PCS.)

12 -- 05

* ALTERNATIVE PARTS

--- 3 --

STANDARD ACCESSORIES
ITEM NO. * 501 * * 506 * * * 509 CODE NO. 325-096 321-591 321-590 879-357 944-458 325-090 321-993 321-996 321-593 CHIP COVER DUST COLLECTOR TABLE INSERT JIG SAW BLADE NO. 41 (5 PCS.) HEX. BAR WRENCH 4MM CASE SUB BASE (B) SET (PLASTIC) SPECIAL BOLT GUIDE DESCRIPTION
1 FOR EUROPE, NZL, AUS 1 FOR EUROPE, NZL, AUS 1 FOR EUROPE, NZL, AUS INCLUD. 508 FOR FRA 4 FOR FRA 1 FOR FRA

OPTIONAL ACCESSORIES

ITEM NO. CODE NO. 963-400 879-336 879-337 879-338 879-339 879-340 879-341 321-878 321-992 321-996 321-593 325-149 DESCRIPTION

JIG SAW BLADES NO.97 FOR STAINLESS (5PCS.) NO. USED

INCLUD. 610

JIG SAW BLADES NO. 11 (5 PCS.) JIG SAW BLADES NO. 12 (5 PCS.) JIG SAW BLADES NO. 15 (5 PCS.) JIG SAW BLADES NO. 16 (5 PCS.) JIG SAW BLADES NO. 21 (5 PCS.) JIG SAW BLADES NO. 22 (5 PCS.) JIG SAW BLADES (LONG) 185L (3PCS.) SUB BASE (A) SET (STEEL) SPECIAL BOLT GUIDE GREASE (MOLUB-ALLOY NO. 777-1) 75G

--- 4 ---

Printed in Japan 12 -- 05 (051229N)

HECTORJONESLTD 117KINGSTREETNORTH HASTINGS PH:0800708070 www.hitachitools.co.nzsales@hectorjones.co.nz CJ110MVA110mm720WattBarrelGripJigsaw
The latest generation in professional Jigsaw design. Awesome performance is acheived with its powerful motor and 4-stage orbital cutting action. Given the accuracy required by tools of this type, it is no surprise that this new design features a non-slip handle, ergonomically positioned controls, and a rugged nickel-plated cast alloy base plate. To provide a cleaner work environment and maintain good vision of the blade, a removable dust extraction outlet can be connected to an external dust collector. When not using dust extraction, the built-in blower redirects airflow from the fan and blows dust away from the cutting area. When it comes to blade changing nothing could be simpler than Hitachi's new quick release system. A flick of a lever and the blade is released. Locking a blade in is just as easy. With a 26mm stroke and a capacity of 110mm in timber, this Jigsaw is an awesome performer.
Features: Variable speed Includes dust collection adapter Toolless blade change by lever A new orbital balance design for low vibration and smooth cutting Powerful input 720W motor 3-mode orbital action LED light Soft grip Handle Light weight 2.2kg Dust blowing for clear view over cut line Specifications : Capacity: Wood 110mm Capacity: Mild Steel Plate 10mm Capacity: Min. Cutting Radius 25mm Base Tilt Angle 45 Right/Left Power Input 720W Length of Stroke 26m No Load Speed(stroke) 850 - 3,000/min. Overall Length 264mm Weight 2.1kg Standard Accessories:
Blade Splinter Guard Chip Cover Dust Collection Adapter Carry Case