Hitachi CPX1200, size: 7.7 MB
Part Number: CP-X1200-LAMP
Here you can find all about Hitachi CPX1200, for example manual and . You can also write a review.
[ Report abuse or wrong photo | Share your Hitachi CPX1200 photo ]
User reviews and opinions
|Lily||5:06pm on Sunday, August 29th, 2010|
|I initially bought this game for the Nintendo DS for the Monopoly game, as this for me was the stand out one of the four games on offer.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
LENS SHIFT BNG COMPONENT S-VIDEO RGB INTER M1-D INPUT KEYSTONE SEARCH RESET FOCUS ZOOM
User's Manual - Operating Guide
Thank you for purchasing this projector.
WARNING Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. NOTE The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual. The reproduction, transmission or use of this document or contents is not permitted without express written authority. TRADEMARK ACKNOWLEDGMENT : VGA and XGA are registered trademarks of the International Business Machines Corporation. Apple and Mac are registered trademarks of Apple Computer, Inc. VESA and SVGA are trademarks of the Video Electronics Standard Association. Windows is a registered trademark of Microsoft Corporation. Internet Explorer is a trademark of Microsoft Corporation. All other trademarks are the property of their respective owners.
This multimedia projector is used to project various computer signals as well as NTSC/PAL/SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized.
Ultra High Brightness
Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly efficient optical system.
Whisper Mode Equipped User Memory Function
Special mode is available for reducing projector noise to achieve quieter operation.
This projector can memorize 4 settings by MY MEMORY function.
Partial Magnification Function
Interesting parts of images can be magnified for closer viewing.
Keystone Distortion Correction Optical Lens Shift
Quick correction of distorted images electrically.
The lens of this projector can be shifted vertically. When you want to finely adjust the picture position, use the LENS SHIFT buttons.
Please see the Contents Of Package of the Users Manual Quick Guide. Your projector should come with the items shown there. Contact your dealer anything is missing.
NOTE Keep the original packing material for future reshipment. For moving the projector, be sure to use the original packing material. Use special caution for the lens part.
Projector Features Preparation Part Names Projector Control Buttons Remote control Setting Up Arrangement Adjusting The Projectors Elevator Using The Lens shift Buttons Connecting Your Devices Connecting The Power Supply Remote Control About The Laser Pointer Putting Batteries Operating The Remote Control Using The Remote ID Feature Using The Mouse/Keyboard Control Function Power ON/OFF Turning On The Power Turning Off The Power Operating Selecting An Input Signal Selecting The Aspect Ratio Using The Automatic Adjustment Feature Adjusting The Picture Position Correcting The Keystone Distortion Adjusting The Volume Muting The Sound Temporarily Blanking The Screen Freezing The Screen Using The Magnify Feature Displaying The Child Window Selecting An Audio Input 3 Multifunctional Settings Using The Menu Functions MAIN Menu PICTURE-1 Menu PICTURE-2 Menu INPUT Menu AUTO Menu SCREEN Menu OPTION Menu NETWORK Menu Network Setting Up Lamp Replacing The Lamp Air Filter Caring For The Air Filter Other Care Caring For The Inside Of The Projector Caring For The Lens Caring For The Cabinet And Remote Control Troubleshooting Related Messages Regarding The Indicator Lamps Phenomena That May Easily Be Mistaken For Machine Defects Warranty And After-Service Specifications TECHNICAL 47
VIDEO BNG COMPONENT S-VIDEO STANDBY/ON TEMP INTER LAMP
BNG COMPONENT S-VIDEO RGB M1-D INPUT KEYSTONE SEARCH RESET MENU TEMP FOCUS ZOOM INTER VIDEO STANDBY/ON LAMP
REMOTE CONTRO AUDIO IN2 RGB RGB OUT AUDIO OUT CR/PR Ca/Pa L R/CR/PR G/Y B/CB/PB H V R-AUDIO IN-L BNC
MENU KEYSTONE SEARCH RESET FOCUS ZOOM
Elevator button Elevator foot Remote sensor Lens cap Lens The picture is projected from here. 6 Filter cover An air filter is inside.
A B C D E F G H I J K L M -
RGB port M1-D port BNC port
AUDIO IN 1 port AUDIO IN 2 port
CONTROL port NETWORK port AUDIO IN R/L port VIDEO IN port S-VIDEO port COMPONENT port RGB OUT port AUDIO OUT port REMOTE CONTROL port DC OUT port AC Inlet Power switch Control buttons See the following page.
181(4.6) 272(6.9) 45(114) 90(229) 243(6.2) 364(9.2) 60(152) 120(305) 304(7.7) 455(11.6) 75(191) 150(381) 366(9.3) 547(13.9) 90(229) 180(457) 427(10.9) 638(16.2) 105(267) 210(533) 489(12.4) 730(18.5) 120(305) 240(610) 612(15.5) 913(23.2) 150(381) 300(762) a [inch (m)] b [inch (cm)] Min. Max. m:n=1:1 m:n=10:0 50(1.3) 77(2.0) 10(25) 23(58) 77(2.0) 117(3.0) 15(37) 91(2.3) 137(3.5) 17(44) 104(2.6) 157(4.0) 20(50) 131(3.3) 197(5.0) 25(62) 158(4.0) 237(6.0) 29(75) 198(5.0) 297(7.5) 37(93) 34(87) 40(102) 46(116) 57(145) 69(174) 86(218)
300 (7.6) 350 (8.9) 400 (10.2) 500 (12.7)
Reference for the 16:9 aspect ratio
Screen Lens center b n m
Screen Size [inch (m)] 40 (1.0) 60 (1.5) 70 (1.8) 80 (2.0) 100 (2.5) 120 (3.0) 150 (3.8) 200 (5.1) 250 (6.4) 300 (7.6) 350 (8.9)
265(6.7) 396(10.1) 49(125) 114(291) 332(8.4) 496(12.6) 61(156) 143(363) 399(10.1) 596(15.1) 74(187) 172(436) 466(11.8) 696(17.7) 86(218) 200(508) 533(13.5) 795(20.2) 98(249) 229(581) 600(15.2) 895(22.7) 110(280) 257(654)
400 (10.2) 450 (11.4)
Setting Up (continued)
Adjusting The Projector's Elevator
WARNING Do not touch about the lens and ventilation openings during use or immediately after use to prevent a burn. CAUTION To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet. You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.
Press and hold in the elevator buttons. Raise or lower the projector to the desired height and then release the elevator buttons. When you release the elevator buttons, the elevator feet will lock into position. As necessary, you can also finely adjust the height of the projector by twisting the elevator feet by hand.
Using The Lens Shift Buttons
NOTE Generally, better quality of a picture is available when the lens shift is set to the center. The lens of this projector can be shifted vertically. When you want to finely adjust the picture position, use the LENS SHIFT buttons of the projector.
LENS SHIFT buttons Projector
Connecting Your Devices
WARNING Whenever attempting to connect other devices to the projector, read thoroughly the "User's Manual - Safety Guide", this manual and the manual of each device to be connected. Incorrect connecting could result in fire or electrical shock. CAUTION TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. ATTENTION Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector. Refer to the section Technical of this manual for the pin assignment of connectors and RS-232C communication data. Some cables have to be used with core set. Use the accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector. Secure the screws on the connectors and tighten. Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptops RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.
VIDEO BNG COMPONENT S-VIDEO STANDBY/ON TEMP INTER LAMP MENU RESET FOCUS ZOOM
memo You can use the remote control as a wired remote control, by connecting the REMOTE CONTROL ports of the main unit and remote control via an audio cable (3.5 dia. stereo mini cable with plugs).
Using The Remote ID Feature
This is the function to properly use when you use two or three same type projectors at the same time. This function should be used combining a setup of a projector.
Set the ID number to the projector beforehand, referring to the item IR REMOTE ID of the section OPTION Menu.
memo When the ALL is selected to the item IR
REMOTE ID of the OPTION menu, the projector is controlled by a remote control irrespective of the position of the ID CHAGE switch.
ID CHANGE switch
ESC POSITION MAGNFY ON FREEZE OFF KEYSTONE SEARCH 3 ID CHANGE MUTE MENU RESET PinP AUTO VOLUME
Slide the knob of the switch into the position of the ID number of the projector you want to control.
Using The Mouse/Keyboard Control Function
CAUTION Before connecting, read the manuals of the device you will connect. Mistaken use of the mouse/keyboard control could damage your equipment. Only connect to a PC. Do not unplug the connector cables while the computer is operating. Using the USB control feature, you can use the remote control as a simplified mouse or keyboard of the computer. Connect the M1-D port of the projector to the computer via the M1-D cable. Then functions illustrated below will be enabled.
memo The USB control can be used with
Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computers configurations and mouse drivers.
memo The function can be used only for the
Mouse left button
Mouse move pointer Keyboard Arrow keys / / / Mouse right button Keyboard ESC key (Rear)
functions illustrated on the right.
ESC MENU RESET PinP FREEZE OFF KEYSTONE SEARCH 3 ID CHANGE AUTO VOLUME MUTE
memo The projector would be enumerated as a
mouse and a keyboard of HID (Human Interface Device) class devices, after connecting cable.
WARNING When the power is ON, a strong light is emitted. Do not look into the lens or vents of the projector.
NOTE Turn the power on/off in right order. Please power on the projector before the connected devices. Power off the projector after the connected devices.
Turning On The Power
Remove the lens cap.
STANDBY/ON button / indicator
BNG COMPONENT S-VIDEO RGB M1-D INPUT KEYSTONE SEARCH RESET MENU TEMP FOCUS ZOOM INTER VIDEO STANDBY/ON
Set the power switch to [ | ] (ON). The STANDBY/ON indicator will light to solid orange. Press the STANDBY/ON button. The projector lamp will light up and the STANDBY/ON indicator will begin blinking green. When the power is completely on, the indicator will stop blinking and light green. Use the LENS SHIFT buttons to shift the picture upward or downward. Select an input signal according to the section Selecting An Input Signal of the following page.
V R-AUDIO IN-L
Power switch (ON position)
LENS SHIFT buttons
Turning Off The Power
Press the STANDBY/ON button. The message Power off? will appear on the screen for approximately 5 seconds. Press the STANDBY/ON button again while Power off? the message is visible. The projector lamp will go off, and the STANDBY/ON indicator will begin blanking orange. Then the STANDBY/ON indicator will stop blinking and light to solid orange when the lamp cooling is complete. Switch the power switch to [O] (OFF). The STANDBY/ON indicator will go off. Attached the lens cap.
LENS SHIFT BNG COMPONENT S-VIDEO RGB M1-D INPUT KEYSTONE SEARCH RESET MENU TEMP FOCUS ZOOM INTER VIDEO STANDBY/ON
Power switch (OFF position)
Selecting An Input Signal
Select an input signal. Using the INPUT dial Turn the INPUT dial of the projector. Turning the dial cycles through the input ports as shown below. Select the signal you wish to project.
M1-D VIDEO RGB S-VIDEO BNC COMPONENT
M1-D RGB BNC COMPONENT S-VIDEO VIDEO ENTER MENU INPUT RESET SEARCH
Using SEARCH button Press the SEARCH button of the projector or the remote control. Pressing the button automatically cycles through input ports and displays the picture of retrieved signal.
memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will turn to the state it was in prior to the search.
Using RGB button Press the RGB button of the remote control. Pressing the button toggles between the RGB ports as shown below Select the signal you wish to project.
M1-D RGB BNC
ESC POSITION MAGNFY ON
Using VIDEO button Press the VIDEO button of the remote control. Pressing the button toggles between the VIDEO ports as shown below Select the signal you wish to project.
to correct the
Press the KEYSTONE button again to close the dialog and complete this operation. memo Even if you don't do anything, the dialog will automatically disappear after a few seconds. memo When this adjustment is excessive, certain degradation may appear on the picture. Also, please note that it may not function correctly with some input.
Adjusting The Volume
Press the VOLUME button. As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the volume. Use the cursor buttons adjust the volume. / to
ESC POSITION MENU RESET PinP FREEZE OFF KEYSTONE SEARCH AUTO VOLUME MUTE
Press the VOLUME button again to close the dialog and complete this operation.
memo Even if you don't do anything, the dialog will
automatically disappear after a few seconds.
Muting The Sound
Press the MUTE button. As illustrated on the right, a dialog will appear on the screen indicating that you have muted the sound. Press the MUTE or VOLUME button to restore the sound.
memo Even if you don't do anything,
ESC POSITION MAGNFY
ON OFF KEYSTONE SEARCH 3
the dialog will automatically disappear after a few seconds.
Temporarily Blanking The Screen
Press the BLANK button. The input signal screen will shut off, and a BLANK screen will appear.
memo You can set the BLANK screen using the
menu. Please refer to the item BLANK of the table of the section SCREEN Menu.
Press the BLANK button again to remove the blank screen, and return to the input signal screen.
Freezing The Screen
Press the FREEZE button. As illustrated on the right, a dialog will appear on the screen, and the screen will freeze at the current image.
Press the FREEZE button again to restore the screen to normal. The icon || will change to the icon . And after a couple of seconds, the dialog will be closed and the screen will be restored to normal.
memo The freezing feature will automatically finish if a remote controls
Press the MENU button again to close the menu display and complete this operation.
memo Even if you dont do anything, the menu will
5) Press the MENU button.
automatically disappear after a few seconds
Multifunctional Settings (continued)
With the MAIN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.
Item BRIGHT CONTRAST Adjust the brightness using the Adjust the contrast using the / Description / buttons. : buttons. : Light Strong Dark Weak
Select an aspect ratio using the / buttons. : At a M1-D signal NORMAL 4:3 16:9 The NORMAL keeps the original aspect ratio of the input signal. At a RGB signal (not M1-D) 4:3 16:9 At a video signal 4:3 16:9 SMALL memo At a HDTV signal of 1125i or 750p, only the 16:9 can be selected. Select the NORMAL or the WHISPER using the / buttons. : NORMAL WHISPER When the WHISPER is selected, acoustic noise and screen brightness are reduced. Select a mirror status using the NORMAL H:INVERT / buttons. : V:INVERT H&V:INVERT
MIRROR ex. Select a menu language using the ENGLISH LANGUAGE NORSK NEDERLANDS SVENSKA PORTUGUS SUOMI POLSKI FRANAIS / buttons. : ESPAOL ITALIANO
Select the EXECUTE using the button to reset the MAIN menu items. : EXECUTE CANCEL The items of the MAIN menu are collectively returned to the initial setting. Note that the items WHISPER and LANGUAGE are not reset.
With the PICTURE-1 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.
Item Description Select a gamma mode using the / buttons. : NORMAL CINEMA DYNAMIC CUSTOM Selecting the CUSTOM and then pressing the (or the ENTER) button calls the CUSTOM menu. CUSTOM Menu GAMMA Select an item using the / buttons, and press the NORMAL GAMMATEMP 2.2 CINEMA HIGH COLOR DYNAMIC 100 R (or the ENTER) button to perform each function. CUSTOM 100 G 100 B GAMMA COLOR TEMP R G B memo The R, G and B can be selected only when the : SELECT USER is selected under the COLOR TEMP. GAMMA GAMMA COLOR TEMP R G B COLOR BAL R COLOR BAL G COLOR BAL B Adjust the gamma data using the Up Down / / buttons. : buttons. :
MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT GAMMA COLOR BAL R COLOR BAL G COLOR BAL B SHARPNESS COLOR TINT MY MEMORY NORMAL +0 +0 +0 +0 +0 +0 LOAD1
INPUT Menu (continued)
Item Description Select a signal input port for the child window using the / buttons. : VIDEO S-VIDEO memo About the child window, please refer to the section Displaying the Child Window. Select the display position of the child window using the P.IN P. POSIT. / buttons. :
P.IN P. INPUT
memo About the child window, please refer to the section Displaying the Child Window. Select a signal input port to display just when the projector is turned on, using the / buttons. : LAST INPUT M1-D RGB BNC COMPONENT S-VIDEO VIDEO Selecting the LAST INPUT selects the port that was used at the last time. Pressing the (or the ENTER) button displays the INPUT INFORMATION menu. The INPUT INFORMATION menu shows the information about the current signal input as illustrated below.
INPUT-INFORMATION RGB 1024x768 @60.0 FRAME LOCK INPUT-INFORMATION S-VIDEO SECAM AUTO INPUT-INFORMATION COMPONENT 575i @50 SCART RGB
memo The FRAME LOCK message means the frame lock function is working. This function automatically works when a RGB signal with vertical frequency of 50 to 60 is input, and it displays a moving picture more smoothly. memo The SCART RGB message means the COMPONENT port is working as a SCART RGB port. Please refer to the item COMPONENT in this table. Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, an S2-video signal can be identified and the optimum aspect ratio is automatically selected. memo This item is performs only at a S-VIDEO signal. memo When the ASPECT button is used or the item ASPECT of the MAIN menu is operated, the TURN OFF will be automatically selected to this item. Select the EXECUTE using the button to reset the INPUT menu items. : EXECUTE CANCEL The items of the INPUT menu are collectively returned to the initial setting. Note that the item INFORMATION is not reset.
With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.
Item Description Pressing the (or the ENTER) button performs the automatic adjustment. At a RGB signal The vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically adjusted. memo Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting. At a video signal The signal type mode best suited for the respective input signal will be selected automatically. memo This function is available only when the AUTO is selected to the item VIDEO of the INPUT menu. For a component video signal, the signal type is identified automatically independently of this function. memo This operation requires approximately 10 seconds, and the message AUTO IN PROGRESS is displayed during the operation. memo This operation may not work well at some signals. If the picture becomes unstable (ex. a irregular picture, a color lack), please select the suitable mode to the item VIDEO of the INPUT menu. Set the time using the / Long (max. 99 minutes)
AUTO POWER OFF ENABLE
MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT ADJUST POWER OFF POWER ON SEARCH RESET 0 min TURN ON TURN ON
buttons. : Short (min. 0 minute = DISABLE)
AUTO POWER OFF DISABLE 0min
ex. When the time is set to 1 to 99, the projector lamp will go off and the STANDBY/ON indicator begins blinking when the passed time with a proper signal (without no-signal and an unsuitable signal) reaches at the set time. Please refer to the section Turning Off The Power. Select the TURN ON or the TURN OFF using the / buttons.: TURN ON TURN OFF When the TURN ON is selected, you can turn the projector on without pressing the STANDBY/ON button. Please refer to the section Turning Off The Power. (This table is continued to the following page.)
AUTO Menu (continued)
Item Description Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, detecting no signal cycles through input ports and displays the picture of retrieved signal. M1-D SEARCH VIDEO S-VIDEO RGB
memo When the TURN ON is selected, pressing the RGB button selects the M1-D ports, and pressing the VIDEO button selects the COMPONENT port. memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will return to the state it was in prior to the search. Select the EXECUTE using the button to reset the AUTO menu items. : EXECUTE CANCEL The items of the AUTO menu are collectively returned to the initial setting. Note that the item ADJUST is not reset.
With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.
Item Description Select a type of the BLANK screen using the / buttons. : MyScreen ORIGINAL BLUE WHITE BLACK The BLANK screen is the screen, which is displayed by pressing the BLANK button. The MyScreen is the screen you can register a desired screen, and the ORIGINAL is the existing standard screen. The BLUE, the WHITE and the BLACK are the non-pattered (plain) screens in each color. memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes. memo For the MyScreen, please refer to the item MyScreen in this table. Select a type of the START UP screen using the / buttons. : MyScreen ORIGINAL TURN OFF The START UP screen is the screen, which is displayed by detecting no signal or an unsuitable signal. The MyScreen is the screen you can register a desired screen, and the ORIGINAL is the existing standard screen. When the TURN OFF is selected, the BLUE is used. memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK after several minutes. If also the BLANK screen is the MyScreen or the ORIGINAL, it will change to the BLACK screen. memo About the MyScreen, please refer to the item MyScreen in this table. About the BLUE, BLACK and BLANK screens, please refer to the item BLANK in this table. Pressing the (or the ENTER) button starts the MyScreen registration. Please see the flow chart on the following page. Select the size of the MyScreen using the x1 FULL / buttons. :
MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT BLANK START UP MyScreen MyScreen SIZE MyScreen LOCK MENU POSITION MESSAGE RESET BLACK ORIGINAL x1 TURN OFF TURN ON
Select the TURN ON or the TURN OFF using the / buttons.: TURN ON TURN OFF MyScreen LOCK The TURN ON disables the operation of the item MyScreen of this SCREEN menu. After pressing the (or ENTER) button, adjust the menu position using the / / / buttons.: Up MENU POSITION Left + Right button. Down memo To finish this operation, press the ESC button but not the buttons. :
(This table is continued to the following page.)
SCREEN Menu (continued)
Item Description Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, the following message function works. The message of the AUTO IN PROGRESS for the auto adjustment. The message of the NO INPUT IS DETECTED The message of the SYNC IS OUT OF RANGE The message of the Searching The message of the Detecting The indication of the input signal by input change. The indication of the aspect ratio by changing the aspect ratio. The indication of FOCUS by adjusting the focus. Select the EXECUTE using the button to reset the SCREEN menu items. : EXECUTE CANCEL The items of the SCREEN menu are collectively returned to the initial setting.
How to register your picture as the MyScreen MyScreen is pointed on the SCREEN menu. Press the button
MyScreen Do you start capturing this picture?
The MyScreen menu appears. Do you capture the picture from the current screen? If the ESC/RESET button is pressed.
NO: Press the ESC/RESET button
YES: Press the ENTER button
The picture freeze and the frame for capturing appears. Move the frame to the position of the picture which you want to use, using / / / buttons, and press the ENTER button to register.
MyScreen Move the capture area as you want. ESC :RETURN ENT :NEXT
NETWORK - SETUP Pressing the (or the ENTER) button calls the IP IP ADRRESS ADDRESS menu. 192. 168. 1. 24 memo This item performs only when the TURN OFF ESC ENT :NEXT :RETURN is set to the item DHCP of this NETWORK menu. The IP Address is identification number of the projector on the Network. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT SETUP DHCP INFORMATION RESET TURN OFF
1. Set the IP Address using the / buttons. memo The same number as the IP Address of other units cannot be used. Pressing the (or the ENTER) button at the IP NETWORK - SETUP SUBNET MASK ADDRESS menu calls the SUBNET MASK menu. The 255. 255. 255. 1 SUBNET MASK is an address of the Network. ESC ENT :NEXT :RETURN 2. Set the same number as the address of the Network to be used. Pressing the (or the ENTER) button at the NETWORK - SETUP DEFAULT GATEWAY SUBNET MASK menu calls the DEFAULT GATEWAY 255. 255. 255. 0 menu. The DEFAULT GATEWAY is the address of ESC ENT :NEXT :RETURN the main device. 3. Set the same number as the address of the device as gateway to an outer Network.
NETWORK Select the TURN ON or the TURN OFF using the / DHCP buttons. : TURN ON TURN OFF TURN ON TURN OFF When you use a Network unsuitable to the DHCP function, select the TURN OFF.
Pressing the (or the ENTER) button displays the INFORMATION menu. The INFORMATION menu shows the information about the current Network setting as illustrated below.
NETWORK-INFORMATION IP ADRRESS 192. 168. 1. 24 SUBNETMASK 255. 255. 255. 0 DEFAULT GATEWAY 255. 255. 255. 0 MAC ADRRESS 00. E0. 47. 03. 0C. D8
Select the EXECUTE using the button to reset the NETWORK menu items. : EXECUTE CANCEL The items of the NETWORK menu are collectively returned to the initial setting.
Network Setting Up
This projector provides the NETWORK function. If you use this function, please consult your dealer for information. To start, connect the NETWORK port to a gateway device via a RJ-45 (10BASE-1) cable, then set up the projector according to the Network environment in which you use it.
When you use a Network unsuitable to the DHCP function
Please set the IP Address, the Subnet Mask, the Gateway and the DHCP (on/off) using the NETWORK menu, referring to the section NETWORK Menu.
When you use a Network suitable to the DHCP function or has been set up
You can set the IP Address, the Subnet Mask, the Gateway and the DHCP (on/off) using a Web Browser of the computer connected to the Network. Although it needs a Web Browser of Internet Explorer 4.0 or higher. Input the same IP address as set to the projector, to the Web Browser of the computer connected to LAN. ex. Case of IP Address = 192.168.1.11 1) Input http://192.168.1.11. 2) Click ENTER.
3) Input the required data according to the screen. 4) Make sure of the input data, then click "Write".
memo These setting will be active after reboot. These setting will be stored, and used when DHCP is OFF.
5) Click Return to top page.
6) Click REBOOT to complete this operation.
The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projectors vent holes. About disposal of a lamp This product contains a mercury lamp; do not put in trash. Dispose of in accord with environmental laws. For lamp recycling, go to www.lamprecycle.org. (in USA) For product disposal, contact your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada). For more information, call your dealer. If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projectors internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself. If the lamp should break (it will make a loud bang when it does), ventilate the room well, and make sure not to breathe the gas that comes out of the projector vents, or get it in your eyes or mouth. Before replacing the lamp, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently. Handling the lamp while hot can cause burns, as well as damaging the lamp. Do not open the lamp cover while the projector is suspended from above. This is dangerous, since if the lamps bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or injury. Use only the lamp of the specified type DT00601. If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. Handle with care: jolting or scratching could cause the lamp bulb to burst during use. If the indicators or a message prompts you to replace the lamp (see the section Related Messages and Regarding the indicator Lamps), replace the lamp as soon as possible. Using the lamp for long periods of time, or past the replacement date, could cause it to burst. Do not use old (used) lamps; this is a cause of breakage.
Caring For The Inside Of The Projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about once every 2 years.
Caring For The Lens
Turn off the projector, and unplug the power cord. Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand.
Caring For The Cabinet And Remote Control
Turn off the projector, and unplug the power cord. Wipe lightly with gauze or a soft cloth. memo If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company.
memo Although these messages will be automatically disappeared around several
minutes, it will be reappeared every time the power is turned on.
Message CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER. Description
The time the lamp timer has counted is approaching 2000 hours.
Preparation of a new lamp, and an early lamp change is recommended. After you have change the lamp, please be sure to reset the lamp timer.
CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER. THE POWER WILL TURN OFF AFTER ** hr. CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER. THE POWER WILL TURN OFF AFTER 0 hr.
The time the lamp timer has counted is approaching 2000 hours, so a lamp change within ** hours is recommended.
When lamp usage reaches 2000 hours, the power will automatically be turned off. Please change the lamp by referring to the section Lamp. After you have changed the lamp, please be sure to reset the lamp timer.
As the time the lamp timer has counted has reached 2000 hours, the power will soon be automatically turned off.
Please immediately turn the power off, and change the lamp by referring to the section Lamp. After changing the lamp, please be sure to reset the lamp timer. (This table is continued to the following page.)
NOTE A lamp has a finite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This projector is equipped with an automatic shut-down function, such that the power will automatically be turned off when lamp usage time has reached 2000 hours. Please be aware, however, that among lamp types, there are major differences in product lifetimes; a lamp may thus fail to light even prior to the functioning of the automatic shut-down function of this projector.
Reference pages 11 15
Cases not involving a machine defect The electrical power cord is not plugged in. Correctly connect the power cord. The power switch is not set to the on position. Set the power switch to [ | ] (On). The main power source has been interrupted during operation such as by a power outage (blackout), etc. Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector has sufficiently cooled down, please turn the power on again. Either there is no lamp and/or lamp cover, or either of these has not been properly fixed. Please turn the power off, and allow the unit to cool down at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. The signal cables are not correctly connected. Correctly connect the connection cables.
Power does not come on.
Neither sounds nor pictures are outputted.
Signal source does not correctly work. Correctly set up the signal source device by referring to the manual of the source device. The input changeover settings are mismatched. Select the input signal, and correct the settings.
Phenomena That May Easily Be Mistaken For Machine Defects (continued)
Phenomenon Cases not involving a machine defect The signal cables are not correctly connected. Correctly connect the connection cables. Pictures are displayed, but no sounds are heard. The volume is adjusted to an extremely low level. Adjust the VOLUME to a higher level. The sound is muted. Press the MUTE button to restore the sound. The audio input is not correctly selected when the child window is displayed. Correctly select the audio input. The lens cap is attached. Remove the lens cap. Sounds are heard, but no pictures are displayed. The signal cables are not correctly connected. Correctly connect the connection cables. The brightness is adjusted to an extremely low level. Adjust the BRIGHT to a higher level using the menu function. The screen is blanked. Press the BLANK button to return to the input signal screen. Colors have a faded- out appearance, or Color tone is poor. Color settings are not correctly adjusted. Perform picture adjustments by changing the COLOR BAL R, COLOR BAL G, COLOR BAL B, COLOR and/or TINT settings, using the menu functions. The brightness and/or contrast are adjusted to an extremely low level. Adjust the BRIGHT and/or CONTRAST settings to a higher level using the menu function. The WHISPER function is working. Select the NORMAL to the item WHISPER in the MAIN menu. The lamp is approaching the end of its product lifetime. Replace the lamp. Either the focus and/or horizontal phase settings are not properly. Adjust the focus using the focus buttons, and/or H PHASE using the menu function. The lens is dirty or misty. Clean the lens by referring to the section Caring For The Lens. Input signal changes with no operation. The INPUT dial is set between the click points. Turn the INPUT dial and set it at a click point. Reference pages 8, 9 19, 32 19
3,500 ANSI Lumens Network Control, Diagnostics and Monitoring (including E-Mail Alerts)* Native XGA resolution Vertical & horizontal keystone correction 17 lbs. Picture in Picture My Screen Progressive scan Easy operation 35 dB (Whisper Mode) 3D-YCS Video Noise Reduction FCC class B Color temperature and gamma correction Lens shift 10:0 to 1:1 HDTV theater ready Reverse image function for ceiling mount Convenient lamp replacement
* with use of supplied Windows based PJ Monitoring & Control Software
Model name Liquid crystal panel structure Number of pixels Resolution Video RGB Colors Aspect ratio Lens Throw ratio (distance:width) Display size Lamp Expected lamp life Brightness Contrast ratio Speakers Power supply Power consumption Operating temperature Input signals RGB Composite video Component video Acoustic noise level H Sync V Sync Vertical keystone correction Horizontal keystone correction Approvals RGB input Analog RGB CP-X1200 series 0.99" P-Si active-matrix TFTx 3 with Micro Lens 786,432 pixels (H1,024 x V768) 540 TV lines 1024 dots x 768 lines 16.7 million colors Native 4:3 (16:9 resizing mode) Power zoom 1:1.5 (F=1.7-2.4) (f=31-46mm) 1.5 ~ 2.2:1 (distance:width) 40 ~ 500 inches 275W UHB 2,000 hours (approx) 3,500 ANSI Lumens 800:1 1.0 W x 2 AC100 - 120V/220 - 240V 430W 32 ~ 95F (0 ~ 35C) VGA, SVGA, XGA, SXGA/UXGA (compressed), MAC13, MAC16, NTSC, NTSC4.43, PAL, PAL60, SECAM, PAL-M, PAL-N 480i, 575i, 480p, 1080i, 720p 39dB (35dB in whisper mode) 15kHz ~ 91kHz 50Hz ~ 120Hz Digital keystone +/ 15 Digital keystone +/ 5 UL60950/C-UL, FCC Part 15, Class-B, CE, TUV ENpin Mini-D-sub terminal x 1, BNC x 5 (Share with component video) Audio Stereo mini jack x 2 Digital RGB M1-D x 1 RGB output RGB 15-pin D-sub connector x 1 Audio Stereo mini jack x 1 Video input S-video Mini DIN 4-pin connector x 1 Composite video RCA jack x 1 Component video RCA jack x 3, BNC x 3 (Share with Analog RGB) Audio RCA jack(x2) x 1 for Video Control terminals 9 pin D-sub connector x 1 M-1 (for USB remote control mouse only) Wired remote control input 3.5mm mini jack x 1 Ethernet RJ-45 Port / 10BASE-T Dimensions (W x H x D) 16.5 x 6.3 x 12.6 (420 x 160 x 320mm) Weight 17 lbs. Supplied accessories Remote control, batteries (AA), RGB cable, Video/Audio cable, M1 cable (DVI and USB to M1), Power cord, Operator/safety manual Lamp model name CPX1200LAMP Remote control (Part #: HL02001)
Screen Size 4.3 Diagonal* Width* 200 160
Throw distance Min* Max* 243 364
Throw ratio: 1.5-2.2:1 (distance:width) *: Measured in inches
For sales information, call 1.800.225.1741. Printed 07/04 Specifications are subject to change without notification.
Pro-m7 EM-S5595S P4G8X AM1450 Battery DKS-7500Q E-330 LM-230 P2602HW-C AEG-electrolux IH18 Ii-2003 PC-1248 LE37C535f1W KX-T9000BS Omniaccess 6000 WK-200 MZ-NF610 Biloba 130 MF-FM20s1K AJ-PD900W DCR-DVD410E CFX16 AX6B-TBL CDX-GT120 VP-D60 F1203FD KV-32S26 WF7604NAW IR 622 42PFL7662D SE1501B Sbcru111 Series SGH-I640V Radio 166 PMA400 T712C 29PT9521 12 TT 6244 Calculator 1244-4IU Trickster SDE-3000 VPL-PS10 KV-29LS35B Ergometer P2 DSC-W380 PX-7500S 1410XI UE22C4010 SU-C1010 160 PS AW12ECB8 Flash 5 1 Luna 450 Virtual DJ GT-M3510L CME1056R Raid 5 P7010 EDC46130W KV-24DA1 DMP-555 TX-8011 LH-T9654SB LFD23860ST AVX-P7650DVD EP1085 VP-L906 42PF5421 Live 2005 RQ-NX60V Rocketraid 2240 XEA110 VR485-02 RHT-G800 APS57 1350E DS116 I-DOG PUP Mc2404 S12AHP Sr0 GR-151SF KM-6330 MT-4X INT2700 Racing UX-BD80 DVP-S315 TX-32LZD85F RH361LD AW8-MAX DPL930VD-radio SGH-Z630 RBC30sesa MDE9651 Alesis QS82 Nuvi 215
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101