Hitachi Power Tools

CORDLESS DRIVER DRILL Model DS 14DFL

LIST NO. G864

ELECTRIC TOOL PARTS LIST
ITEM NO. * 1 * * * * * * 39 * * * * 45 320-287 320-288 306-952 315-141 319-926 320-881 327-729 327-728 317-333 324-482 328-498 324-484 324-499 324-498 324-117 323-229 324-116 CODE NO. 324-503 311-959 322-167 324-205 324-490 324-114 324-108 324-109 324-110 324-347 324-491 306-936 324-111 324-348 324-349 324-501 324-357 324-115 324-351 324-112 324-352 324-492 324-494 324-493 324-355 324-495 324-483 324-485 313-687 DESCRIPTION SPECIAL SCREW (LEFT HAND) (B) M6X23 SPECIAL SCREW (LEFT HAND) M6X23
DRILL CHUCK 10VLRF-N (W/O CHUCK WRENCH) DRILL CHUCK 13VLRM-N (W/O CHUCK WRENCH) NO. USED

DS 14DFL

REMARKS

3 INCLUD. 4-24

GEAR BOX ASS'Y CLUTCH DIAL CLICK SPRING NUT SPRING WASHER (D) FRONT CASE STEEL BALL D5 RING GEAR PLANET GEAR (C) SET (3 PCS.) WASHER (A) REAR CASE SCREW SET D3X12 (4 PCS.) SHIFT ARM SLIDE RING GEAR PINION (C) PLANET GEAR (B) SET (3 PCS.) PINION (B) PLANET GEAR (A) SET (3 PCS.) FIRST RING GEAR WASHER (B) MOTOR SPACER MOTOR SPACER NAME PLATE
TAPPING SCREW (W/FLANGE) D3X16 (BLACK)
MACHINE SCREW (W/SP. WASHER) M4X6 HOUSING (A).(B) SET
INTERNAL WIRE (BLACK) 90L INTERNAL WIRE (RED) 140L DC-SPEED CONTROL SWITCH PUSHING BUTTON FERRITE CORE SHIFT KNOB HITACHI LABEL HOOK ASS'Y V-LOCK NUT M5 STRAP (BLACK) TERMINAL SUPPORT (A) HOOK SPRING SPECIAL SCREW (A) M5 BATTERY BCL 1415 (EUROPE, AUS, NZL) BATTERY BCL 1415 (USA, CAN) CAUTION PLATE

HOUSING (A).(B) SET

FOR USA, CAN EXCEPT FOR USA, CAN INCLUD. 39 EXCEPT FOR NZL, AUS, USA, CAN FOR USA, CAN 1

* ALTERNATIVE PARTS

--- 2 ---

4 -- 07

STANDARD ACCESSORIES
ITEM NO. * 501 * 503 983-006 327-727 CODE NO. DESCRIPTION CHARGER (MODEL UC 18YGL) CHARGER (MODEL UC 18YRL) + DRIVER BIT NO. 2 65L CASE

NO. USED

--- 3 --

ITEM NO.

CODE NO.

DESCRIPTION

--- 4 ---
Printed in Japan 4 -- 07 (070427N)

DS14DFL/DS18FDL 14.4V/18V Drill/Drivers
New drill/drivers with all new Lithium Ion batteries Long life - unique protection circuit gives up to 1300 battery cycles Light weight - 40% lighter than NiCad batteries Standard battery fitting, compatible with existing Hitachi cordless tools High maximum torque Handy belt hook with bit holder 13mm keyless chuck Two speed gearbox Variable speed & reverse Soft grip handle Fan cooled charger with 20 minute charge time
Standard Accessories Two 1.5Ah Li-Ion batteries UC18YRLfan cooled charger Driver bit Carrying case
Model No-load Speed Number Low/High DS14DFL DS18DFL 0-400/min 0-1200/min 0-400/min 0-1200/min
Maximum Capacity Torque Steel Wood 31Nm 41Nm 12mm 13mm 30mm 36mm
Overall Length 210mm 220mm

Weight 1.6kg 1.7kg

NOTE: Hitachi Li-Ion batteries hold their charge for longer, which means there is no discernible loss of performance throughout the battery charge. The user should be aware that the machine may cut out when the battery needs recharging or is overloaded. This is not a battery fault; the new technology protects the battery cells, giving extended charging cycles when compared to previous battery technology.
Specification is subject to change without notice.