FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Notice If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

READ THIS FIRST

Trademark Information
Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Inc. SD is a trademark. SDHC is a trademark. Other names and products may be trademarks or registered trademarks of their respective owners.

Product Information

Product design and specifications are subject to change without notice. This includes primary product specifications, software, software drivers, and users manual. This User Manual is a general reference guide for the product. The product and accessories that come with your camera may be different from those described in this manual. This is due to the fact that different retailers often specify slightly different product inclusions and accessories to suit their market requirements, customer demographics, and geographical preferences. Products very often vary between retailers especially with accessories such as batteries, chargers, memory cards, cables, pouches, and language support. Occasionally a retailer will specify a unique product color, appearance, and internal memory capacity. Contact your dealer for precise product definition and included accessories. The illustrations in this manual are for the purpose of explanation and may differ from the actual design of your camera. The manufacturer assumes no liability for any errors or discrepancies in this user manual.

SAFETY INSTRUCTIONS

Read and understand all Warnings and Cautions before using this product.

Warnings

If foreign objects or water have entered the camera, turn the power off and remove the batteries. Continued use might cause fire or electric shock. Consult the store of purchase. If the camera has fallen or its case has been damaged, turn the power off and remove the batteries. Continued use might cause fire or electric shock. Consult the store of purchase. Do not disassemble, change or repair the camera. This might cause fire or electric shock. For repair or internal inspection, ask the store of purchase. Do not use the camera in areas near water. This might cause fire or electric shock. Take special care during rain, snow, on the beach, or near the shore. Do not place the camera on inclined or unstable surfaces. This might cause the camera to fall or tilt over, causing damage. Keep the batteries out of the reach of children. Swallowing the batteries might cause poisoning. If the batteries are accidentally swallowed, immediately consult a physician. Do not use the camera while you are walking, driving or riding a motorcycle. This might cause you to fall over or result in traffic accident. Please use batteries with complete external seals. Do not use batteries from which the seals have been damaged or removed. This may cause leakage, explosion, or injury.

Cautions

Load the batteries paying careful attention to the polarity (+ or ) of the terminals. Loading the batteries with their polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyones eyes. This might cause damage to the persons eyesight. Do not subject the LCD monitor to impact. This might damage the glass on the screen or cause the internal fluid to leak. If the internal fluid enters your eyes or comes into contact with your body or clothes, rinse with fresh water. If the internal fluid has entered your eyes, consult a physician to receive treatment. A camera is a precision instrument. Do not drop it, strike it or use excessive force when handling the camera. This might cause damage to the camera. Do not use the camera in humid, steamy, smoky, or dusty places. This might cause fire or electric shock. Do not remove the batteries immediately after long period of continuous use. The batteries become hot during use. Touching a hot battery might cause burns. Do not wrap the camera or place it in cloth or blankets. This might cause heat to build up and deform the case, resulting in fire. Use the camera in a well-ventilated place. Do not leave the camera in places where the temperature may rise significantly, such as inside a car. This might adversely affect the case or the parts inside, resulting in fire. Before you move the camera, disconnect cords and cables. Failure to do this might damage cords and cables, resulting in fire and electric shock.

Notes on Battery Usage

When you use the batteries, carefully read and strictly observe the Safety Instructions and the notes described below: Use only the specified batteries. Avoid extremely cold environments as low temperatures can shorten the battery life and reduce camera performance. Therefore Ni-MH rechargeable batteries are highly recommended. When you are using a new rechargeable batteries or rechargeable batteries that have not been used for an extended period of time (the batteries that passed the expiry date are exception), it may affect the number of images that can be captured. Therefore, to maximize their performance and lifetime, we recommend that you fully charge the batteries and discharge them for at least one complete cycle before use. The batteries may feel warm after a long period of continuous use of the camera or the flash. This is normal and not a malfunction. The camera may feel warm after a long period of continuous use. This is normal and not a malfunction. If the batteries are not to be used for a long period of time, remove them from the camera to prevent leakage or corrosion and store them after no battery power is left. Stored for a long time in a fully charged condition, their performance may be impaired. Always keep the battery terminals clean. There is a risk of explosion if the batteries are replaced by an incorrect type. Dispose of used batteries according to the recycle instructions. Charge the rechargeable batteries fully before using for the first time. Never use batteries of different types (together) or mix old and new batteries. Never use manganese batteries. To prevent short-circuiting or fire, keep the batteries away from other metal objects when carrying or storing.

CONTENTS

INTRODUCTION...7
Overview....7 Package Contents...7
GETTING TO KNOW YOUR CAMERA...8
Front View....8 Rear View....9 LCD Monitor Display....10

GETTING STARTED...12

Preparation....12

CAPTURE MODE...13

Capturing Images....13 Recording Shots using Face Detection Technology..13 Setting the Scene Mode....14

VIDEO MODE....16

Recording Video Clips....16 Playing Back Video Clips...16

PLAYBACK MODE...17

Playing Back Still Images...17 Thumbnail Display....17

MENU OPTIONS....18

Capture Menu...18 Video Menu....20 Playback Menu....21 Setup Menu....22
SYSTEM REQUIREMENT...23 USING THE CAMERA AS A PC CAMERA...23
Install the PC camera driver...23

SPECIFICATIONS....24

Connecting to a PictBridge Compatible Printer..25

INTRODUCTION

Overview
Congratulations on your purchase of the new digital camera. Capturing high-quality digital images is fast and easy with this state-of-the-art smart camera. Equipped with an 10.0-megapixel sensor, this camera is capable of capturing images with a resolution of up to 3648 x 2736 pixels.

Package Contents

Carefully unpack your camera and ensure that you have the following items: Common Product Components: Digital Camera Software CD-ROM Users Manual USB cable Camera strap Camera pouch 2 x AA size batteries
Common (Optional) Accessories: SD/SDHC memory card
Accessories and components may vary by retailer.
GETTING TO KNOW YOUR CAMERA

Front View

1. Shutter button 2. Power button 3. Status LED 4. Flash 5. Self-timer LED 6. Microphone 7. Lens

Rear View

Item 1. 2. 3. 4. 5. 6. 7. 8.
Function Capture Mode Zoom Wide Menu Capture Mode Focus Auto>

> >

Video Mode Zoom Wide Menu Video Mode Focus Auto>

Playback Mode Zoom

Menu Playback Mode Rotation Right Next Image Delete -Previous Image Set
Flash Z>Y>X>W Self-timer Off>10s>2s>10+2s

Compensation ] [

-Self-timer Off>10s>2s

Set Scene mode

LCD Monitor Display
Capture Mode 1. Scene mode 2. Flash mode [Z] Auto Flash [Y] Red-eye Reduction [X] Forced Flash [W] Flash Off 3. Zoom status 4. Battery condition [D] Full battery power [C] Medium battery power [B] Low battery power [A] No battery power 5. Storage media [}] Internal memory (no card) [{] SD/SDHC memory card 6. CaptureMd. [Blank] Single [ ] Cont. [ ] AEB [ ] Burst [ ] Cont.flash [ ] Pre-Shot [ ] Coupl.shot 7. Image size resolution [10M] 10M (3648 x 2736 pixels) [8M] 8M (3264 x 2448 pixels) [6M] 6M (2816 x 2112 pixels) [4M] 4M (2272 x 1704 pixels) [2M] 2M (1600 x 1200 pixels) [0.3M] 0.3M (640 x 480 pixels) 8. Image quality [ ] Fine [ ] Normal [ ] Economy 9. Available number of shots 10. Main focus area 11. Date 12. Self-timer icon [%10s] 10 sec. [%2s] 2 sec. [%10+2s] 10+2 sec.

10M 10s

2008/01/01 00154
13. ISO 14. []] Backlight correction [[] Exposure compensation 15. Slow shutter warning * Poor lighting conditions. Images will be vulnerable to vibration. 16. Metering [o] Average [q] Spot 17. W.Balance [Blank] Auto [f] Incand. [h] Fl1 [i] Fl2 [c] Daylight [d] Cloudy [ ] Manual 18. Focus setting [Blank] Auto focus [ ] Face detection [m] Macro [ ] Infinity
Video mode [S] 1. Mode icon 2. Zoom status 3. Battery condition 4. Storage media 5. Video resolution 6. Available recording time/Elapsed time 7. Main focus area 8. Date 9. Self-timer icon 10. Focus setting

2008/01/03:50

Playback mode [x] - Still image playback 1. Mode icon 2. File number 3. Folder number 4. Protect icon 5. DPOF icon

100-0001

Playback mode [x] - Video playback 1. Total recorded time 2. Video status bar 3. Elapsed time 4. File number 5. Folder number 6. Protect icon 7. Mode icon 8. Play mode

Play 00:25

Total 00:51

GETTING STARTED

Preparation
1. Attach the camera strap.
2. Open the battery/memory card cover. 3. Load the supplied batteries with orientation as shown.

correct

4. Insert an SD/SDHC memory card (Optional). The camera has 16MB internal memory (12MB available for image storage), but you can load an SD/SDHC memory card to expand the cameras memory capacity. Be sure to format the memory card with this camera before its initial usage. 5. Close the battery/memory card cover and make sure it is locked securely.
To prevent valuable data from being accidentally erased from an SD/ SDHC memory card, you can slide the write protect tab (on the side of the SD/SDHC memory card) to LOCK. To save, edit, or erase data on an SD/SDHC memory card, you must unlock the card To prevent damaging of an SD/SDHC memory card, be sure to turn off the power when inserting or removing the SD/SDHC memory card. If inserting or removing the SD/SDHC memory card with the power on, the camera will automatically turn off. Be careful not to drop the batteries when opening or closing the battery cover.

CAPTURE MODE

Capturing Images
Your camera is equipped with a 3.0" full color TFT LCD monitor to help you compose images, playback recorded images/video clips or adjust menu settings. 1. Press the Power button to turn the power on. The status LED lights green and the camera is initiated. 2. Set the camera mode to [ ]. 3. Compose your image in the LCD monitor. Pressing the button zooms in on the subject, and enlarges the subject on the LCD monitor. Pressing the button provides a wider angle image. 4. Press the shutter button. Pressing the shutter button down halfway automatically focuses and adjusts the exposure, and pressing the shutter button down fully captures the images. The focus area frame turns blue when the camera is in focus and the exposure is calculated. When the focus or exposure is not suitable, the frame of the focus area turns yellow.

Recording Shots using Face Detection Technology
Face Detection Technology can identify and focus on the human faces in the image. This advanced function simultaneously detects up to 5 human faces regardless of their position in the scene. 1. Set the camera mode to [ ]. ] icon appears on the LCD monitor. 2. Toggle the [m ] button until [ The white frame is identified as the top priority face (main focus frame), and gray ones around the other faces. 3. Press the shutter button halfway down to lock the focus. The main focus frame simultaneously turns green. If the top priority face is out of focus, the main focus frame turns red. 4. Press the shutter button down fully to capture your image.
Subjects that are not suitable with this function: a. A person wearing glasses, sunglasses, or face covered with hat or hair. b. A person turning sideways.

Setting the Scene Mode

By simply selecting one of the following 20 modes, you can capture the image with the most appropriate settings. 1. Set the camera mode to [ ]. 2. Press the SCN/SET button. 3. Select the desired scene mode with the / buttons, Sports 07/20 and press the SCN/SET button. 4. Compose the image and press the shutter button.

MENU:Exit SET:OK

The table below will help you choose the appropriate scene mode: Scene mode Description P Program AE Smile Shot This mode allows you to manually set parameters other than the shutter speed and the aperture value. Select this mode to automatically capture an image when a smiling face is detected. This mode minimizes the influences of hand shaking when you want to capture an image.

n Anti-Shake

Portrait Man Select this mode when you want to capture an image that makes a man stand out against a blurred background. Portrait Lady Select this mode when you want to capture an image that makes a lady stand out against a blurred background. l Landscape l Sports Select this mode when you want to capture an image with infinity focus, hard sharpness and high saturation. Select this mode when you want to capture fast-moving subjects. night scene background. h Night Scene c Candlelight Select this mode when you want to capture dark scenes such as night views. Select this mode when you want to capture photos of candlelit scene, without spoiling the ambience. Select this mode when you want to capture fireworks clearly with optimal exposure. The shutter speed becomes slower, so using a tripod is recommended. Select this mode when you want to capture an image that contains black and white subjects like printed documents.
g Night Portrait Select this mode when you want to capture people with an evening or

d Fireworks

| Text
Scene mode e Sunset m Sunrise

Description Select this mode when you want to capture a sunset. This mode helps keep the deep hues in the scene. Select this mode when you want to capture a sunrise. This mode helps keep the deep hues in the scene. Select this mode when you want to capture the soft flowing water. Select this mode when you want to capture clear snow scenes without darkened subjects and bluish tint. Select this mode when you want to capture bright beach scenes and sunlit water surfaces. Select this mode when you want to capture your pets. Shoot from their eye level.
k Splash Water Select this mode when you want to capture photos of splashing water. e Flow Water _ Snow Beach a Pets
\ User Setting This mode allows you to manually set your favorite parameters and these settings will be memorized.

VIDEO MODE

Recording Video Clips
This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels. Voice can also be recorded. 1. Set the camera mode to [w]. 2. Compose the image. 3. Press the shutter button. The recording of the video clip will start. Pressing the shutter button one more time will end the recording of the video clip. The recording time depends on the storage size and the subject of the image to be recorded. The zoom function cannot be used during video recording.
When recording a video clip, the flash cannot be used. If the write speed of your SD/SDHC memory card is not fast enough for recording video clips in the currently selected size, and then the video recording will stop. In this case, select a video size lower than the current one.

Playing Back Video Clips

You can play back recorded video clips on the camera. 1. Set the camera mode to [x]. The last image appears on the screen. 2. Select the desired video clip with the / buttons. 3. Press the SCN/SET button. A press of the / buttons during playback allows fast forward play / fast reverse play. To stop video playback, press the button. This stops playback and returns to the start of the video clip. To pause video playback, press the SCN/SET button. This pauses video playback. To cancel pause, press the SCN/SET button again.
Video clips cannot be displayed rotated or enlarged. This camera does not have a built-in speaker so that you can not play back sound with the camera. To play the video clip back on your computer, you may use either Windows Media Player or Apple QuickTime Player. QuickTime basic player is available free of charge, compatible with Mac and Windows-computers and can be downloaded from the Apple web site at www.apple.com. For help using QuickTime Player usage, please refer to the QuickTime on-line help for more information.

PLAYBACK MODE

Playing Back Still Images
You can play back the still images on the LCD monitor. 1. Set the camera mode to [x]. The last image appears on the screen. 2. The images can be displayed in reverse or forward sequence with the / buttons. To view the previous image, press the button. To view the next image, press the button. Pressing the button enlarges the image. To return to normal magnification, press the button.

An [S] icon is displayed with the video data.

Thumbnail Display

This function allows you to view thumbnail images on the LCD monitor so you may search for a particular image/video clip/audio file. 1. Set the camera mode to [x]. The last image appears on the screen. 2. Press the button. 3 thumbnail images are displayed simultaneously. Press the / buttons to select the file to be displayed. Press the / buttons to go to the previous or the next page. 3. Press the SCN/SET or button to exit from the thumbnail display.
100-0001 100-0001 100-0002 100-0002 100-0003 100-0003 100-0004 100-0004 100-0005 100-0005 100-0006 100-0006 100-0007 100-0007

MENU OPTIONS

Capture Menu
This menu is for the basic settings to be used when capturing still images.

Capture Capture

Size Quality Color W.Blance ISO W Metering

MENU:Exit

10M Normal Normal Auto Auto Average

SET:Adj.

A Sharpness Normal

Saturation Normal

1. Set the camera mode to [ ]. 2. Press the MENU button, and select the [Capture] / [Function] menu with the / button. 3. Select the desired option item with the / buttons, and press the SCN/SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SCN/SET button. 5. To exit from the menu, press the MENU button. Size This sets the size of the image that will be captured. * [10M] 10M (3648 x 2736 pixels) * [8M] 8M (3264 x 2448 pixels) * [6M] 6M (2816 x 2112 pixels) * [4M] 4M (2272 x 1704 pixels) * [2M] 2M (1600 x 1200 pixels) * [0.3M] 0.3M (640 x 480 pixels) Quality This sets the quality (compression) at which the image is captured. *[ ] Fine *[ ] Normal ] Economy *[ Color This sets the color of the image that will be captured. * Normal / Vivid / Sepia / B&W W. Balance This sets the white balance for a variety of lighting conditions and permits images to be captured that approach the conditions that are seen by the human eye. * [ Blank ] Auto * [ f ] Incand. * [ h ] Fl1 * [ i ] Fl2 * [ c ] Daylight * [ d ] Cloudy *[ ] Manual
ISO This sets the sensitivity for capturing images. When the sensitivity is raised (and the ISO figure is increased), photography will become possible even in dark locations, but the more pixelated (grainier) the image will appear. * Auto / 80 / 100 / 200 / 400 / 800 / 1000 Metering This sets the metering method for calculating the exposure. * [ o ] Average: The entire area of the screen is measured, and the exposure is calculated. * [ q ] Spot: A very small portion of the center of the screen is measured, and the exposure is calculated. Sharpness This sets the sharpness of the image that will be captured. Saturation This sets the saturation of the image that will be captured. CaptureMd. This sets the recording method at the time of capturing images. * [Blank] Single: Captures one image at a time. *[ ] Cont.: Permits continuous capture of up to 3 images. *[ ] AEB: Permits 3 consecutive images in the order of standard exposure, underexposure and overexposure compensation. *[ ] Burst: Permits continuous photography while pressing holding the shutter button.As long as you hold the shutter button pressed, images are captured until thememory capacity is exhausted. *[ ] Cont.flash: Permits continuous capture of up to 3 images with flash. *[ ] Pre-Shot: Lets you capture the background first, then have someone to capture you in front of it. *[ ] Coupl.shot: Uses separate areas to combine two shots. You can include yourself in the shot. Date Print The date of recording can be printed directly on the still images. This function must be activated before the image is captured. Preview This sets whether or not to display the captured image on the screen immediately after the image is captured. Digi. Zoom This sets whether or not to use digital zoom at the time of photography.

Video Menu

This menu is for the basic settings to be used when recording video clips.

640x480

1. Set the camera mode to [ w ]. 2. Press the MENU button. 3. Select the desired option item with the / buttons, and press the SCN/SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SCN/SET button. 5. To exit from the menu, press the MENU button.
Size This sets the size of the video clip that will be captured. * [VGA] 640 x 480 * [QVGA] 320 x 240 Color This sets the color of the video clip that will be captured. * Normal / Vivid / Sepia / B&W

Playback Menu

In the [x] mode, choose which settings are to be used for playback.
Fix Red Eyes Slide Show DPOF Protect LCD Bright. Copy to Card
Next Menu 3 sec. Next Menu Next Menu 0 Next Menu
1. Set the camera mode to [x]. 2. Press the MENU button. 3. Select the desired option item with the / buttons, and press the SCN/SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SCN/SET button. 5. To exit from the menu, press the MENU button. Fix Red Eyes You can use this function to remove the red-eye effect after an image is taken. Slide Show You can play back recorded images in order with a selected interval. DPOF DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the embedded information on the memory card and print the specified images. Protect Set the data to read-only to prevent images from being erased by mistake. LCD Bright. Select a brightness level for the LCD monitor. The LCD becomes brighter with the button and darker with the button. The adjustment range is from -5 to 5. Copy to Card Allows you to copy your files from the cameras internal memory to an SD/SDHC memory card. Of course, you can only do this if you have a memory card installed and some files in internal memory.

Setup Menu

Set your cameras operating environment.
Beep Date/Time Language Fr.No.Reset LCD Bright. Auto Off
On Next Menu English Next Menu Min.
Beep Format Fr.No.Reset Media Info. Sys. Info. Language
On Next Menu Next Menu Next Menu Next Menu English
Set the camera mode to [ ] / [S] / [x]. Press the MENU button. Select the [Setup menu with the button. Select the desired option item with the / buttons, and press the SCN/SET button to enter its respective menu. 5. Select the desired setting with the / buttons, and press the SCN/SET button. 6. To exit from the menu, press the MENU button. Beep This sets whether or not to mute the camera sound each time you press the camera's buttons. Date/Time This sets the cameras date and the time. Language Specify in which language menus and messages are to be displayed on the LCD monitor. Fr. No. Reset This creates a new folder. The captured images are recorded to the newly created folder from number 0001. LCD Bright. Refer to section in this manual titled LCD Bright. in Playback Menu for further details. Auto Off If no operation is performed for a specific period of time, the power to the camera is automatically turned off. This feature is useful for reducing battery usage. Light Freq. This camera supports different lighting frequencies: 50 Hz and 60 Hz. When photographing under fluorescent lighting, select the correct frequency setting depending in your local area's voltage. This function is only effective if you set the White Balance to Fluorescent setting. Sys. Reset This returns all basic settings to the cameras default settings. The time setting will not be reset. Format This utility formats the internal memory (or memory card) and erases all stored images and data. Media Info. This displays the free capacity of the internal memory or the memory card. Sys. Info. This displays the firmware version of the camera.

1. 2. 3. 4.

SYSTEM REQUIREMENT
Windows Pentium III 800 or equivalent Windows 2000/XP/Vista 256MB RAM (512 MB recommended) 150MB available hard disk space CD-ROM drive Available USB port Macintosh PowerPC G3/G4/G5 OS 9.0 or later 256MB RAM (512 MB recommended) 128MB available hard disk space CD-ROM drive Available USB port
USING THE CAMERA AS A PC CAMERA
Your camera can act as a PC camera, which allows you to videoconference with business associates, or have a real-time conversation with friends or family. To use the camera for videoconferencing, your computer system must include the items as below: Microphone Sound card Speakers or headphones Network or Internet connection
Install the PC camera driver
The PC-camera driver included in the CD-ROM is exclusively for Windows. The PC camera function is not supported for Mac platforms. 1. Insert the enclosed CD-ROM into your CD-ROM drive. 2. Follow the on-screen instructions to complete the installation. 3. After the driver installation is completed, restart your computer.

SPECIFICATIONS

Item Image sensor Image resolution Description 1/2.33 CCD sensor (10.0 megapixels) <Still image> 3648 x 2736, 3264 x 2448, 2816 x 2112, 2272 x 1704, 1600 x 1200, 640 x 480 <Video clip> 640 x 480 (30 fps), 320 x 240 (30 fps) 3.0 full color TFT LCD (230K pixels) 16MB internal memory (12MB available for image storage) Supports SD/SDHC memory card (up to 4GB) (optional) DCF, JPEG (EXIF 2.2), DPOF, Motion-JPEG 3x optical zoom lens Aperture range: 2.9 (W) - 5.2 (T) Focal length: 5.7mm - 17.1mm (equivalent to 34mm - 102mm on a 35mm camera) Auto Focus 0.5m to infinity Macro Wide: 0.10m to infinity Tele: 0.35m to infinity 2 - 1/1000 sec. Auto / 80 / 100 / 200 / 400 / 800 / 1000 4x (Capture mode) 1-4x in 0.5x increment (Playback mode) 0.5m - 2.4m (Wide) 0.5m - 2.1m (Tele) USB 2.x AA size batteries Approx. 97 x 62 x 21mm (without protruding parts) Approx. 132g (without batteries and memory card)
LCD monitor Recording media File format Lens

Focus Range

Shutter speed ISO Sensitivity Digital zoom Flash effective range Terminal Power supply Dimensions Weight
* Design and specifications are subject to change without notice.
Connecting to a PictBridge Compatible Printer
Read this section if the model you purchased is included with the PictBridge functions. If a printer that supports PictBridge is available, images can be printed by connecting the digital still camera directly to the PictBridge-compatible printer without using a computer. Connecting the camera to the printer 1. Connect one end of the USB cable to your camera. 2. Connect the other end of the USB cable to the USB port on the printer. 3. Turn on your camera. 4. Select [Printer] with the / buttons, and press the SCN/SET button. Printing images When the camera is properly connected to a PictBridge compliant printer and set to [Printer], the PictBridge menu is displayed on the monitor. 1. Select the item you want to configure with the / PictBridge buttons, and press the SCN/SET button. Images Next Menu [Images]: Select whether you want to print specific Date Print Off image or all images. You may also select printing Paper Size Default number for specific image. Layout Default [Date Print]: According to the printer type, select Print whether you want to print the image with date imprint or not. SET:Enter [Paper Size]: Select the desired paper size according to the printer type. [Layout]: Select the desired printing layout according to the printer type. [Print]: After all settings are configured, select this item to start printing. 2. If you select [Images] in the previous step, the figure shown on the right hand side will appear. Select [Single], [All], [DPOF] with the / buttons, and press the SCN/SET button. 3. If you select [Single] in the previous step, the figure shown on the right hand side will appear. Select the image that you want to print with the / buttons. Select the [Print Num] (up to 99) with the / Single buttons. After selecting the desired image and printing number, Print Num press the SCN/SET button to confirm. 00 4. Select [Print] with the / buttons, and press the SCN/SET button to start printing. 100-0001 The [COMPLETE] will be displayed temporarily, reminding you that the printing procedure is finished. SET:Enter If a print error is detected, the [PRINT ERROR] will be displayed.

The image printing may be failed if the power to the camera is cut off.

QUICK START GUIDE

This Quick Start Guide is only for quick reference. For more details on advanced functions, you can refer to your users manual. Helpline Number: 08704460806

Item 1. 2.

3. 4. 5.
1. Shutter button 2. Power button 3. Status LED 4. Flash 5. Self-timer LED 6. Microphone 7. Lens 6. 7. 8.
2. Open the battery/memory card cover. 3. Load the supplied batteries with correct orientation as shown.
Face Detection Technology can identify and focus on the human faces in the image. This advanced function simultaneously detects up to 5 human faces regardless of their position in the scene. 1. Set the camera mode to [ ]. 2. Toggle the [m ] button until [ ] icon appears on the LCD monitor. The white frame is identified as the top priority face (main focus frame), and gray ones around the other faces. 3. Press the shutter button halfway down to lock the focus. The main focus frame simultaneously turns green. If the top priority face is out of focus, the main focus frame turns red. 4. Press the shutter button down fully to capture your image.
By simply selecting one of the following 20 modes, you can capture the image with the most appropriate settings. 1. Set the camera mode to [ ]. 2. Press the SCN/SET button. 3. Select the desired scene mode with the / buttons, and press the SCN/SET button. 4. Compose the image and press the shutter button.
Scene mode | Text e Sunset m Sunrise

Sports 07/20

Description Select this mode when you want to capture an image that contains black and white subjects like printed documents. Select this mode when you want to capture a sunset. This mode helps keep the deep hues in the scene. Select this mode when you want to capture a sunrise. This mode helps keep the deep hues in the scene.
k Splash Water Select this mode when you want to capture photos of splashing water. e Flow Water Select this mode when you want to capture the soft flowing water.

_ Snow Beach a Pets

Select this mode when you want to capture clear snow scenes without darkened subjects and bluish tint. Select this mode when you want to capture bright beach scenes and sunlit water surfaces. Select this mode when you want to capture your pets. Shoot from their eye level.

The table below will help you choose the appropriate scene mode: Scene mode Description P Program AE This mode allows you to manually set parameters other than the shutter speed and the aperture value. Smile Shot Select this mode to automatically capture an image when a smiling face is detected. n Anti-Shake This mode minimizes the influences of hand shaking when you want to capture an image.
Portrait Man Select this mode when you want to capture an image that makes a man stand out against a blurred background. Portrait Lady Select this mode when you want to capture an image that makes a lady stand out against a blurred background. l Landscape l Sports Select this mode when you want to capture an image with infinity focus, hard sharpness and high saturation. Select this mode when you want to capture fast-moving subjects.
g Night Portrait Select this mode when you want to capture people with an evening or night scene background. h Night Scene Select this mode when you want to capture dark scenes such as night views. c Candlelight Select this mode when you want to capture photos of candlelit scene, without spoiling the ambience. d Fireworks Select this mode when you want to capture fireworks clearly with optimal exposure. The shutter speed becomes slower, so using a tripod is recommended.
This function allows you to view 9 thumbnail images on the LCD monitor at the same time, which can let you quickly search for the image that you want. 1. Set the camera mode to [x]. The last image appears on the screen. 2. Press the button. The images are displayed in the thumbnail display. Images that have been selected with the / / / buttons will be indicated by a yellow frame. When there are ten or more images, scroll the screen with the / buttons. 3. Press the / / / buttons to select the image to be displayed at regular size. 4. Press the SCN/SET button. The selected image is displayed at its regular size.

Language English

WEEE explanation "The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE)." "The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries as unsorted municipal waste, but use the return and collection systems available" "Le marquage est en conformit avec la directive 2002/96/EC du DEEE (dchets dquipements lectriques et lectroniques)". "Ce symbole indique l'obligation de ne pas dposer ce produit dans des dcharges publiques, mais d'utiliser les systmes spcifiques de retour et rcupration disponibles". "Das Symbol ist in bereinstimmung mit der Richtlinie 2002/96/EG ber Elektro- und Elektronik- Altgerte (Elektro- und Elektronik - Altgerte Richtlinie). " "Das Symbol weist darauf hin, dass das Gert einschlielich ge- und verbrauchten Batterien bzw Akkus nicht in den Hausmll gegeben werden darf, sondern den hierfr bestimmten getrennten Sammelsystemen zugefhrt werden muss." La marca es un requisito de la Directiva europea 2002/96/EC (WEEE) acerca de los Residuos de Aparatos Elctricos y Electrnicos. Esta marca indica la obligacin de no mezclar dichos aparatos con los residuos domsticos generales, sino que deben utilizarse los sistemas de recogida especficos, disponibles para estos productos. " Il simbolo in accordo con la Direttiva 2002/96 EC sui Rifiuti Apparecchiature Elettriche ed Elettroniche (RAEE)". "Il simbolo indica l' obbligo della raccolta separata delle apparecchiature elettriche ed elettroniche, pertanto si raccomanda d'utilizzare i sistemi di raccolta e/o restituzione disponibili nella vostra zona per queste tipologie d'apparecchiature". Mrket anger verensstmmelse med "Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). Mrket anger kravet p att anvnda tillgngliga retur- och insamlingssystem och att EJ avyttra utrustningen som osorterat kommunalt avfall. Symbolet er i samsvar med "Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE)". Symbolet angir kravet p anvende tilgjengelige retur og gjenvinningssystem, og ikke benytte vanlige usorterte kommunale avfallsordninger. Het symbool is in overeenstemming met de EU-Richtlijn betreffende afgedankte elektrische en elektronische apparatuur (AEEA) 2002/96/EC. Het symbool geeft aan dat de apparatuur NIET mag worden gestort als ongesorteerd stedelijk huisvuil, maar moet worden ingezameld via de voorziene terugname- en inzamelingssystemen. To (WEEE). , ( ). 2002/96/EC