Hitachi Htdk150EBS Manual
Hitachi Htdk150EBS, size: 993 KB
Here you can find all about Hitachi Htdk150EBS like manual and other informations. For example: review.
Hitachi Htdk150EBS manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Hitachi Htdk150EBS please write about it to help other people. [ Report abuse or wrong photo | Share your Hitachi Htdk150EBS photo ]
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Do not place any object containing water or other liquids on
this unit. In the event that liquid should enter the cabinet, unplug this unit immediately and contact the retailer or service centre immediately. Do not remove the cabinet. Touching parts inside the cabinet could result in electric shock and / or damage to the unit. Do not use the unit in a car. The operation can not be guaranteed. Do not put subwoofer near TV as this might cause interference to TV image. Nonuse Periods When the unit is not being used, turn the unit off. When left unused for a long period of time, the unit should be unplugged from the household AC outlet. No Fingers or Other Objects Inside Do not put any foreign object on the disc tray. Stacking Place the unit in a horizontal position, and do not place anything heavy on it. Condensation Moisture may form on the pickup lens in the following conditions: Immediately after a heater has been turned on. In a steamy or very humid room. When the unit is suddenly moved from a cold environment to a warm one. If moisture forms inside this unit, it may not operate properly. In this case, turn on the power and wait about one hour for the moisture to evaporate. On adjusting volume Do not turn up the volume while listening to a portion with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level portion is played. If There is Noise Interference on the TV While a Broadcast is being Received Depending on the reception condition of the TV, interference may appear on the TV monitor while you watch a TV broadcast with the unit on. This is not a malfunction of the unit or the TV. To watch a TV broadcast, turn off the unit. Service Do not attempt to service the unit yourself. Please refer any service to the nearest service centre. Copyright Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. Please refer to relevant laws in your country.
10cm or more 10cm or more
DVD/VCD/CDSURROUNDRECEIVERHTD-K150 SADY TNB UI PETNGET RV NNX SO P A P U E T P L YA S /
P WR OE OECOE PNL S / O N O F F
POE H NS
V LM OU E SLC EE T V LM OU E
10cm or more
Air vents are provided in the cabinet to prevent excessive
temperatures inside the unit. Do not place this unit in closed spaces, cover it, or otherwise block the vents. Do not place this unit in direct sunlight, or near heat sources. Keep this unit away from strong magnetic objects. Do not insert or drop anything into this unit through the air vents as this could cause serious damage, possibly resulting in fire.
Copy protection This DVD player supports Macrovision copy protection. On DVD discs that include a copy protection code, if the contents of the DVD disc are copied using a VCR, the copy protection code prevents the videotape copy from playing normally. Recommended Measures for Optimum Picture Excellence This unit is a precision device that is constructed using extremely accurate technology. Soiling or friction affecting the pickup lens or disc drive can impair the image quality. At the worst, neither video nor audio will be played back. To obtain optimum picture quality, the player should be checked (cleaning and replacement of some parts) every 1,000 hours. Note that this period varies depending on the environment (temperature, humidity, dust, etc.) in which the player is used. Do not attempt to clean the pickup lens yourself.
Features of This System
DVD player built-in DTS*1 and Dolby Digital*2 decoder, supporting Dolby Pro Logic and Virtual Surround. 5-channel amplifiers attached with active subwoofer. Tuner (AM/FM) receiver. Conforming DVD, SVCD, VCD1.1, VCD2.0, MP3, CDR, CDRW and CD-DA discs. DVD navigation and SVCD, VCD 2.0 PBC controlling functions. VFD front panel display and OSD menu display. Full function remote control.
Manufactured under license from Digital Theater System, Inc. US Pat. No. 5,451,942 and other worldwide patents issued and pending. DTS and DTS Digital Surround are trademarks of Digital Theater Systems, Inc. 1996 Digital Theater Systems, Inc. All rights reserved. *2 Manufactured under license from Dolby Laboratories. Dolby, AC-3, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. 1992-1997 Dolby Laboratories, Inc. All rights reserved.
Conventions about This Manual
Instructions in this manual describe the controls on the system. You can also use the controls on the remote control if they have
the same or similar names as those on the system.
The types of functions and operations that can be used for a particular disc vary depending on the features of that disc. In some
cases, these functions and operations may differ from the descriptions given in this instruction Manual. In this event, follow the instructions given on the screen. This instruction Manual only covers basic disc operations. For some operations, the icon may appear on the screen. This indicates that the operation described in this instruction Manual is not permitted for the current disc. The drawings about the TV screen and front panel display used in this instruction Manual are purely for the purposes of explanation. The actual displays may differ slightly from what are shown here.
Type of Disc That Can be Played on This System
This player can playback discs bearing any of the following marks:
DVDs 12cm disc / 8cm disc See Note-1 See Note-2 See Note-3
Video CDs 12cm disc / 8cm disc See Note-2
Audio CDs 12cm disc / 8cm disc
Supports version until version 2.0
Icons used on DVD discs Sample Icons:
Note-1 DVD players and discs are designed with region numbers which dictate the regions in which a disc can be played. If the region number on the disc you want to play does not match the region number in your DVD player, you will not be able to play the disc. If you try to play the DVD, the message WRONG REGION will appear on OSD. The region number for this DVD player is 2. On the rear panel of the unit has a region code printed. Sample disc display:
1. English 2. Chinese
Number of recorded audio tracks
Number of subtitles recorded
Screen aspect ratio recorded
Disc with Region code Multiple indicator camera angles
Note-4 DVD door can be opened in DVD function only. Glossary of Disc Terms Title (DVD) The longest sections of a picture or a music piece on a DVD; a movie, etc., for a picture piece on a video software; or an album, etc., for a music piece on and audio software. Each title is assigned a title number enabling you to locate the title you want.
Disc playable in all regions
Note-2 The specific playback functionality for some DVD and video CD discs is determined by the disc manufacturer. Because this DVD player plays disc data in accordance with the disc manufacturers guidelines, some functions may not be available on some discs. Be sure to read the instructions provided with the disc. The Prohibited icon displayed during DVD player operation indicates that such manufacturer imposed restrictions apply. Note-3 The audio on a DVD disc recorded in MPEG version 2.0 format maybe cannot be played (image only). Discs that Cannot be Played You cannot play CD-G, PHOTO CD, CD-ROM and DVDROM discs. You cannot play illegally produced discs. You cannot play scratched discs. You cannot play disc that are dusty, soiled or marked with fingerprints.
Subwoofer Rear Panel
SUB WOOFER SYSTEM
M D L:H D-K 5 S BW O E O E T 10 U O F R P W RS P L : O E U P Y ~ 0 z 3 V 5 H 4 I P D N E M E A C :
P W RC N U P I N O E O S M TO : Hitachi,Ltd. Tokyo Japan
0 Phase 180 Audio Input
1 POWER ON/OFF Push this switch to ON position to switch on the system. Push this switch to OFF position to switch off the system. 2 AC cord Connect to a 230V AC power outlet. 3 AUDIO INPUT Connects the audio source such as amplifier.
4 PHASE (0O-180O) The phase relationship between the subwoofer and main speakers may vary depending on the crossover frequency selected and the distance between the subwoofer and the main speakers. While listening to music with strong bass content, move the phase switch between the 0 O and 180O position. Leave the switch in the position that provides the strongest bass output.
Index to Parts and Controls Remote Control
6. STEP(MONO/STEREO) button (page 28, 51) Do the single stepping play while playing a DVD or VCD. Switches between monaural or stereo of FM stereo reception. 7. SEARCH / STATION (+ or -) buttons (page 28, 49) Press to play a disc in fast forward / reverse mode. In tuner mode, press to select the preset stations. 8. SKIP / TUNING( or ) buttons (page 28, 49) In DVD player mode, press to select the next / previous title, chapter or track. In Tuner mode, press to change the tuning frequency. Press and hold the button for more than 1 second to search the station automatically 9. SLOW(MEMORY) button (page 26, 28) Do the slow-motion play while playing a DVD or VCD. In tuning mode, press to save as memory preset station for tuning frequency. 10. STOP button (page 28) Stops playing a disc and clears the stored program. 11. OPEN/CLOSE button (page 27) Opens or closes the disc tray. 12. RETURN button (page 30) Displays the root menu when playing a DVD. Goes back to the PBC menu when playing a VCD or SVCD. 13. REPEAT button (page 31) Press to do a Repeat 1 or Repeat All playback. 14. A-B button (page 31) Specifies a section and plays it repeatedly. 15. MUTE button (page 25) Mutes the sound. 16. LISTENING button (page 51) Selects a listening mode you want. 17. VOLUME ( or ) buttons (page 25) Increase / decrease the master volume level or the selected channel level. 18. SELECT button (page 25) Selects the audio channel to view or adjust its level. 19. 20. 1. STANDBY button (page 28) Turns on and off the system power. 2. GOTO button (page 33) Selects a start point to play. 3. Number buttons Select the items or settings. 4. PROGRAM button (page 32) Sets a program play. 5. NTSC/PAL button (page 22) Changes the color system temporarily to match the your TV standard. 21. / / / / ENTER button Selects and executes the items or settings. AUDIO button (page 47) Selects the audio channels for sound. SUBTITLE button (page 46) Selects a desired language for the subtitles while playing a DVD. LANGUAGE button (page 46) Selects a desired language for the audio when playing a DVD. DISPLAY button (page 34) Switches the item displayed on the TV screen or/and on the front panel display.
DD V TUNER AUX
G T OO
Z O O M
MN E U /PBC
NS / TC P L A
OE / PN CO E L S
SA C E R H STATION SKIP TUNING
STEP ST/MO SLOW MM E O V LM OU E
P O. R G
TS ET T N O E
REMOTE CONTROLLER RB - HTDK150
24. DVD button (page 28) Selects the DVD player mode. 25. ZOOM button (page 45) Zoom in the playing pictures. 26. SETUP button (page 21, 35) Displays or exits the SETUP menu. 27. TEST TONE (page 25) Turns test tone on and off. 28. TUNER button (page 26, 48) Selects FM or AM mode. 29. AUX button (page 49) Selects the AUX1 or AUX2 component (i.e. external source). 30. TITLE button (page 29) Displays the title menu when playing a DVD. 31. MENU/PBC button (page 30) Switch the PBC functions to on or off when playing a VCD (Ver. 2.0) or SVCD. 32. ANGLE button (page 46) Changes the angles while playing a DVD. 33. SLEEP button (page 50) Activates the sleep timer. 34. PLAY/PAUSE button (page 28) Starts or pauses playing a disc.
DISPLAY NTSC/ PAL MUTE
STOP SEARCH STATION SKIP TUNING REPEAT A-B
This section describes how to hookup the system to the speakers, a TV monitor with audio / video input jacks and other video component. You cannot connect this system to a TV monitor which does not have a video input connector. Be sure to turn off the power of each component before making the connections.
Check that you have the following items: Main unit (1) Subwoofer (1) Speakers (5) Remote control (1) Audio & Video cable (1) Subwoofer cable (1) Scart cable(1) Speaker cords (5m x 3, 15m x 2) AM loop antenna (1) FM pigtail antenna (1) Instruction Manual (1)
Inserting Batteries into the Remote Control
You can control the system using the supplied remote control. Insert two batteries by matching the + and - on the batteries. When using the remote control, point it at the remote sensor on the front panel of this system. 3V [2X AAA cell OR IEC R3 OR JIS R3P (JIS SUM-4)]
DVD/VCD/CD SURROUND RECEIVER HTD-K150 STANDBY
TUNING PREV NEXT
P WR O E POE H NS OPEN/CLOSE O N OFF
Note The optional items vary with the changing of listening mode. To adjust the volume of all the speakers (Master Volume) at one time Use the VOLUME and VOLUME buttons in normal mode.
Press the TEST TONE button on the remote control. You will hear the test tone from Front-left speaker, Center speaker, Front-right speaker, Surround-right speaker and Surround-left speaker in sequence. Sit at your listening position, use the VOLUME and VOLUME buttons to adjust the level of each speaker. Adjust the volume level so that the volume of the test tone from each speaker sounds the same. The adjusted value will appear on the front panel display and TV screen. If you do not operate the remote for a few seconds, the value turns off and is stored in the system. Press TEST TONE again to turn off the test tone.
To shut off all of speakers output Press the MUTE button. The red LED on the front panel starts to blink. Press it a second time to release muting and resume the normal output. The blinking LED blacks out.
The playback will pause during test tone. The test tone only tests the valid speakers, depending on the
current listening mode.
Presetting Radio Stations
You can preset 40 stations for FM and AM randomly. Before tuning, make sure that you have turned down the volume to the minimum. TUNING( / ) SOURCE
Press the STATION (+ or -) button on the remote control to select a preset number you want. You can use the number buttons (0~9 / +10) on the remote control to key in a preset number directly.
AUX RETURN ANGLE AUDIO DISPLAY NTSC/ PAL MUTE
LANGUAGE ZOOM 8 0
GOTO 7 +10 SETUP
Press the MEMO button again to store the station. If you do not press this button in 3 seconds or you press any other buttons, the station will not be stored in the system. The preset number and Memory indicator disappear. Repeat Step 2 to 6 to store other stations.
PLAY/ PAUSE STEP
STATION +/TUNING /
VOLUME SELECT LISTENING
To tune in a station with a weak signal Press the TUNING ( or ) repeatedly in Step 3 to tune in the station manually.
In DVD, AUX1 or AUX2 mode, press the TUNER on the remote control to select Tuner function directly. To select between FM or AM, press the TUNER button. You can select FM or AM band using the SOURCE button on the front panel. Press and hold the TUNING ( or ) button until the frequency indicator starts to change automatically, then release the button. Scanning stops when the system tunes in a station.
Press MEMORY(MEMO). A preset number P00 and Memory indicator appear on the front panel display.
This chapter describes how to play a DVD / Video CD / CD / MP3 disc.
Depending on the DVD or Video CD discs, some operations may be different or restricted. Refer to the instructions supplied with your disc. POWER TUNING( or ) STOP SOURCE
DVD TUNER AUX SUB TITLE LANGUAGE TITLE RETURN GOTO ZOOM MENU /PBC ANGLE
STOP SEARCH STATION +/SKIP TUNING /
Turn on the TV and select the video input so that you can view the pictures from this system. Press the POWER button on the front panel to turn on the main power of this system. The front panel display lights up, and the startup screen appears on TV screen. If the system is not in the DVD player mode, press the DVD button on the remote control to enter DVD player mode directly, or press the SOURCE button on the front panel to select it. Press the (OPEN/CLOSE) button, and place a disc on the disc tray. Press again to close the tray. The player begin to loading disc. The operating message will appear on the TV screen or/and on the front panel display, e.g. as the following list: On TV screen On front panel display WAITING DISC LOADING OPEN CLOSE PLAY NO DISC BAD DISC LOADING OPEN CLOSE PLAY NO DISC BAD DISC DVD/VCD/CD/MP3 WRONG REGION (See page 9) PARENTAL VIOLATION (See page 43)
After following Step 4 When playing a DVD A DVD menu or title menu may appear on the TV screen (see page 21). When playing a Video CD The menu screen may appear on the TV screen depending on the Video CD disc. You can play the disc interactively, following the instructions on the menu sceen. (About PBC playback, see page 30.) When playing a CD or MP3 Begin to play the disc from the first track. Note When DVD player is loading disc, the system may not respond your any operations.
Single Stepping Play
Press the STEP button repeatedly to play the disc step by step (one frame every step).
Note This function is not available for CD and MP3.
button to resume normal playback.
Locate a Point Quickly
Press the or remote control button while playing a disc. The player will search the disc fast forward or reverse. When you find the point you want, press the button to return to the normal speed.
Press the / (PLAY/PAUSE) button to begin playback in stop mode. Press it again to pause. Press the (STOP) button to stop playback. In program playback status, press button one time to stop playback, press it again to clear the memory of program. See page 32.
Note If you leave the system in pause or stop mode for 1 minutes, the screen saver image appears automatically. To make the screen saver image go away, press /. (You can set the screen saver function to off, see page 28.) ` 7 When the system is on, press the STANDBY button on the remote control to turn the system off. The red LED on the front panel lights up. In standby mode, press this button to turn on the system. You can also turn on the system using the SOURCE. Note When the system is on, press STANDBY button on the remote control to standby mode. If the power shutted off or the power cord re-plug, the system will go to power on mode.
Selecting a Start Point Using the Time Code
You can search by inputting the time code. The time code corresponds to the approximate actual playing time. For example, to search for a scene 2 hours 30 minutes 20 seconds past the beginning, key in 02:30:20. Note This function is not available for CD and MP3. Note If the title number, chapter number or time code you input is not exist in the disc, the system will not execute your selection and the selecting menu will exit. The selecting menu will time out for a few seconds if you do not input valid number. If the playing disc is Video CD
AUX RETURN ANGLE AUDIO
Press the GOTO button. The time menu appears on the TV screen. GOTO: - - : - -
GOTO Number buttons
Use the number buttons (0~9 / +10) to input the time code you want. For example, key in 0, 1, 2, 3. GOTO: 01 : 23 When the last digit is input and the time code is valid, the system will begin to play (from the point of 01:23).
If the playing disc is DVD
Follow Step 1, press the GOTO button again to exit.
Press the GOTO button, the following menu appears on the TV screen. TITLE 02 / 05 CHAPTER 001 / 006
Selecting a Track Using Number Buttons
You can select a track directly using the number (0~9 / +10) buttons
Use the number.
button to select title number or chapter
TITLE 02 / 05
CHAPTER 001 / 006
In play or stop mode, press the number button to select a
track you want. The system will go to the beginning of the selected track and start playing it. If the track number is more than 10, use the +10 button. The number will increase 10 whenever you press +10 once. For example, you want to select the track of 25. Press the +10 button twice, then press 5 button. Note This function is not available for DVD. If the PBC function is set to on, you cannot select the track on the Video CD (Ver. 2.0) or SVCD using number buttons directly. About PBC, see page 30.
Use the number buttons (0~9 / +10) to input the title or chapter number you want.
Press ENTER to play your selection. Follow Step 1, press the GOTO button again to enter time menu shown as below. TITLE 02 / 05 TIME - - : - - : - -
Use the number buttons (0~9 / +10) to input the time code you want. For example, key in 0, 1, 2, 3, 4, 5. TITLE 02 / 05 TIME 01 : 23 : 45
Front-right (not supplied)
Audio Mode Setting
Path: Main Page Speaker Setup Page Audio Mode.
Dual Mono Setting
Path: Main Page Dolby Digital Setup Dual Mono.
STEREO VSS PRO LOGIC 5.1CH LT / RT
STEREO L - MONO R - MONO MIX - MONO
Selects the Dual Mono reproduction mode to support dual mono programs. STEREO: 2-channel stereo outputs, for stereo and headphone listening. VSS: 2-channel Virtual Surround outputs. PROLOGIC: Dolby Pro Logic decoding function is activated. 5.1CH: Depending on the audio encoding format of the playing disc, Dolby Digital or DTS decoding function is activated automatically. LT / RT: 2-channel Tape outputs (for later decoding by Dolby Pro Logic decoder). Note If the loading disc is identified as VCD or CD format, the unit will set the Audio Mode to PROLOGIC automatically. If the loading disc is identified as DVD format, the unit will set the AUDIO Mode to 5.1CH automatically. If LT/RT, STEREO or VSS is selected, the outputs of Center, Rear and Subwoofer are disabled. Depending on the disc, maybe there is no audio output if LT/RT or STEREO is selected. Depending on the disc, the actual outputs may not match you selection.
Select the Dual Mono reproduction mode to support dual mono programs. STEREO: Reproduces both channels as stereo. LEFT MONO: Only reproduces left mono signal to FL and FR channels. RIGHT MONO: Only reproduces right mono signal to FL and FR channels. MIXED MONO: Reproduces both channels mixed together.
Dynamic Range Setting
Path: Main Page Dolby Digital Setup Dynamic RNG.
FULL 6/8 4/8 2/8 OFF
In many listening situations, it is objectionable to allow the sound to become very loud, and thus the loudest sounds must be compressed downwards in level. Likewise, the very quiet sounds would be inaudible and must be brought upwards in level to be heard. Dolby Digital satisfies these needs through the dynamic range controlling. Selects the dynamic range compression to fit the individual listening situation of the audience. The variable range is from FULL, 7/8 to 1/8, or OFF. FULL: Audio with fully compressed dynamic range. 7/8~1/8: Audio with partially compressed dynamic range. OFF: Audio with uncompressed dynamic range. Note The Dual Mono and Dynamic Range settings only support Dolby Digital programs.
menu, see page 42.
Audio Language Selection
Note This function can only be used for DVD discs on which audio has been recorded in multiple languages. While playing a DVD disc, press the LANGUAGE button repeatedly to select a desire language for audio, and playback then continues in new language. Note The first pressing shows the current selection. Subsequent pressing toggles to the next audio setting. Some DVDs allow you to change audio selections only via the disc menu. Use / / / and ENTER buttons. The maximum number of audio languages stipulated by the manufacturers is 8/8. You can set a preferred audio language, see page 42. Depending on some VCD and DVD discs, you may be able to change the audio format (including audio coding type, number of channels recorded and audio language) using LANGUAGE button. The relevant message appears on the TV display as shown below. AUDIO 2/8: AC-3 5.1CH ENGLISH
Note Before connecting, reduce the volume level. Avoid listening for prolonged periods of time to prevent hearing damage.
1 Plug your headphones to the HEADPHONE jack on the front
panel of the unit. Plug type: 6.35mm, stereo. If the listening mode is not set to Stereo, the system will switch to stereo mode automatically when the headphones have been plugged.
Adjust the volume level using the VOLUME on the front panel or on the remote control.
Note The system shuts off all of speakers outputs when you are using headphone.
This chapter describes how to use some functions contained in the system, i.e. how to listen to the radio, how to listen to an external source, how to select a listening mode and how to use the sleep timer.
Listening to the Radio
Preset radio stations to the systems memory first (see Presetting Radio Stations on page 26). TUNING( or ) SOURCE
Press the SOURCE button repeatedly until FM or AM appears on the front panel display. You can press the TUNER button to select FM or AM directly. The last received station is tuned in.
Press the STATION + or STATION - button repeatedly to select the preset station you want. Each time you press the button, the system tunes in one preset station at a time. In Tuner mode, use the number buttons (0~9 / +10) to key in a preset number (1~40), you can select the preset station directly.
Adjust the volume level by pressing the VOLUME( or ). This system is built in Dolby Pro Logic decoder, so you can enjoy the live sound in Dolby Surround. How to operate, see Selecting Listening Modes on page 50.
To turn off the radio Press the STANDBY button.
To listen to non-preset radio stations Use manual or automatic tuning in step 2. For manual tuning, press TUNING ( or ) repeatedly. For automatic tuning, press and hold TUNING ( or ) until the frequency indicator starts to change automatically, then release the button. If an FM program is noisy Press (ST/MO) button on the remote control so that MONO appears on the front panel display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.
The left and right sounds are unbalanced or reversed. Check that the speakers and components are connected correctly and securely. Adjust front balance parameter using SELECT and VOLUME ( or ) buttons (see page 25). Severe hum or noise is heard. Check that the speakers and components are connected securely. Check that the connecting cords are away from a transformer or motor, and at least 3 meters away from a TV set or fluorescent light. Move your TV away from the audio components. The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. Clear the disc. The sound loses stereo effect when you play a Video CD or a CD. Set the Audio mode to STEREO in the SETUP menu (see page 41). Make sure you connect the system appropriately. The surround effect is difficult to hear when you are playing a Dolby Digital sound track. Set the Audio mode and the Dolby Surround to OFF in the SETUP menu. Check the speaker connections. Depending on the DVD disc, the output signal may not be the entire 5.1 channel but monaural or stereo even if the sound track is recorded in Dolby Digital format. The sound comes from the center speaker only. Depending on the disc, the sound may come from the center speaker only. No sound is heard from the center speaker. Make sure the Center is set to ON in SETUP menu (see page 24). You may set the listening mode to Dolby Pro Logic Phantom (see page 50). Adjust the speaker volume (see page 25). No sound or only a very low-level sound is heard from the rear speakers. Make sure the Rear is set to ON in SETUP menu (see page 24). You may set the listening mode to 3-Stereo (see page 50). Adjust the speaker volume (see page 25). Subwoofer sound deficient or no sound. Make sure connection / setup is correct. If it is still no good, change the subwoofer phase angle (0o180o or 180o-0o). Radio stations cannot be tuned in. Check that the antennas are connected correctly. Adjust the antennas and connect an external antenna if necessary. The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning. No stations have been preset. The remote does not function. Remove any obstacles between the remote control and the system. Use the remote control near the system. Point the remote control at the remote sensor on the front panel. Replace all the batteries in the remote control with new ones if they are weak. Check that the batteries are loaded correctly. The disc does not play. There is no disc inside. (NO DISC appears on the front panel display and the TV screen.) Insert a disc. Insert the disc correctly with the playback side facing down on the disc tray. Clean the disc (see page 10). The system cannot play CD-ROMs, etc. (see page 9). Insert a DVD, a Video CD, a CD , or a MP3 disc. Check the region code of the DVD disc (see page 9). Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour (see page 6). Playback stops automatically. Depending on the disc, the auto pause signal is recorded. While playing such a disc, the system stops playback at the signal. Stopping playback, Search, Slow-motion play, repeat play or Program play, etc., cannot be done. Depending on the disc, you may not do some of the operations above. Messages do not appear on the TV screen in the language you want. Select the language for OSD in SETUP menu (see page 21). The language for the sound cannot be changed when you play a DVD. Multilingual sound is not recorded on the DVD. Changing the language for the sound is prohibited on the DVD.
DVD A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. The data capacity of a single-layer and single-sided DVD, at 4.7 GB (Giga Byte), is 7 times that of a CD. Furthermore, the data capacity of a dual-layer and singlesided DVD is 8.5 GB, a single-layer and double-sided DVD 9.4 GB, and a dual-layer and double-sided DVD 17 GB. The picture data uses the MPEG 2 format, one of the worldwide standards of digital compression technology. The picture data is compressed to about 1/40 of its original size. The DVD also uses the variable rate coding technology that changes the data to be allocated according to the status of the picture. The audio data is recorded in Dolby Digital as well as in PCM, allowing you to enjoy more real audio presence. Furthermore, various advanced functions such as the multiangle, multilingual, and Parental Control functions are provided with the DVD. Multi-angle function Various angles, or viewpoints of the video camera, for a scene are recorded on some DVDs Multilingual function Several languages for the sound or subtitles in a picture are recorded on some DVDs. Parental Control A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback is completely prohibited, violent scenes are skipped or replaced with other scenes and so on. Playback Control (PBC) Signals encoded on Video CDs (Version 2.0) to control playback. By using menu screens recorded on Video CDs with PBC functions, you can enjoy playing simple interactive programs, programs with search functions, and so on. Title The longest sections of a picture or a music piece on a DVD; a movie, etc., for a picture piece on video software; or an album, etc., for a music piece on an audio software. Each title is assigned a title number enabling you to locate the title you want. Track Sections of a picture or a music piece on a CD or Video CD. Each track is assigned a track number enabling you to locate the track you want. Video CD A compact disc that contains moving pictures. The picture data uses the MPEG 1 format, one of the worldwide standards of digital compression technology. The picture data is compressed to about 1/140 of its original size. Consequently, a 12 cm Video Disc can contain up to 74 minutes of moving pictures. Video CDs also contain compact audio data. Sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed. Video CDs can hold 6 times the audio information of conventional audio CDs. There are 2 versions of Video CDs. Version 1.1: You can play only moving pictures and sounds. Version 2.0: You can play high-resolution still pictures and enjoy PBC functions. This system conforms to both versions.
DVD Player Pickup...Semiconductor laser, Wavelength 650 nm Signal system...NTSC / PAL Video signal horizontal resolution..480 lines (DVD) Video signal-to-noise ratio...60 dB (DVD) Audio frequency response (at 2 CH stereo mode).DVD (PCM): 20 Hz ~ 20 kHz (+/- 1.0 dB) CD: 20 Hz ~ 20 kHz (+/- 1.0 dB) Audio signal-to-noise ratio...90 dB Total harmonic distortion...0.02% Dynamic range...DVD : 90 dB CD: 90 dB FM Tuner System....PLL quartz-locked digital synthesizer system Tuning range...87.50 ~ 108.00 MHz (50 kHz step) Antenna....FM pigtail antenna Antenna terminals...75 ohms, unbalanced Intermediate frequency..10.7 MHz AM Tuner System....PLL quartz-locked digital synthesizer system Tuning range...522~1620 kHz (9 kHz interval) Antenna....AM Loop antenna Video outputs CVBS Video....1 Vp-p 75 ohms S-video....Y: 1 Vp-p 75 ohms C: PAL 0.3 Vp-p 75 ohms / NTSC 0.286 Vp-p 75 ohms Scart out...1 Vp-p 75 ohms Optical & Coaxial out...1 Vp-p 75 ohms
Review DC 32 VG900B Motorola 2500 L1753T-SF Server RX-V557 NV-DS29 DA3525 BX600FW C-190 645NII FMS40X SK-5207 DB-V40 Scph-39001N HBH-60 KX-TG9344 SF-5100 Alpha 9-5 2000 MCD709 IC-F3023t-S Duty 5 Dmcls75 Watches Comfort C5300 R-220DW Eurv 6 BD-HP20H Prada TX-904 LBT-G1 RX-500 KV-20M20 Bka123 CS-55P Keyer YBR125-2008 Pupillo Roland FR-7 RX-V440RDS PSR330 205BW Se400S BLE100 DVD-S540 Aspire-1710 RM-NX7000 BCD3000 3030 KD-SH1000 MZ-E77 PCG-R600hmpd Singer 5050 FAX-phone B640 F90HP-2004 CD-450 8150MFP Project IGI GT-7300U Aego 2 TCM-5000EV KX-T7425 SE361 RZ-20LA70 Kodak CD40 IP2200 HDR-CX106E KX-TCD150E F-204RDS BL650 OBY-600 Wash Aspire 5040 Kenwood A950 Olympus E500 EMP-7250 FW-V39-21M Vega 7000 WDH-928 2 0 CD1501B 53 EW1280F BH-600 SBG900 DBA 380 CLP-133 10X-blackberry W-GM SRU160 10 LAV70530-W Year Door Photosmart 8050 Suite Audioline 702 Units SF-3200T Bravada 1997 Yamaha MW12 Paperport 10 HX-DU010EC
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101