Reviews & Opinions
Independent and trusted. Read before buy Hitachi L37VP01U!

Hitachi L37VP01U Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Hitachi L37VP01U, size: 4.3 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Hitachi L37VP01UAbout Hitachi L37VP01U
Here you can find all about Hitachi L37VP01U like manual and other informations. For example: review.

Hitachi L37VP01U manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Hitachi L37VP01U please write about it to help other people.
[ Report abuse or wrong photo | Share your Hitachi L37VP01U photo ]

User reviews and opinions

Comments to date: 3. Page 1 of 1. Average Rating:
netherwolf 5:37pm on Friday, October 29th, 2010 
The Hitachi L37V01U is my first LCD TV. The picture is brilliant, i paid £449 from Richer Sounds and i am very pleased, it is full HD 1920 x 1080p.
kain 3:39am on Tuesday, October 5th, 2010 
Great Value for Full HD Have owned this tv for nearly a year and have been very happy with it. Blu Rays look great with the full HD on this. Excellent Value for Money I have to say that i am extremely pleased with this TV.
sebeke 7:20pm on Monday, May 17th, 2010 
The Hitachi L37V01 HD LCD TV is a full High Definition television. That means it can display in 720p, 1080i and 1080p modes.

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




37" Digital LCD Colour Television

L37VP01E L37VP01U

Safety Precautions.. 3 IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV. 3 DOs... 3 DONTs.. 3 1.Power Source... 4 2.Power Cord.. 4 3. Moisture and Water. 4 4.Cleaning... 4 5. Ventilation.. 4 6. Heat and Flames... 4 7. Lightning.. 4 9. Servicing... 4 10. Waste Disposal... 4 11. Disconnect Device. 5 Features.. 6 Accessories.. 6 LCD TV Front View.. 7 Rear View and Peripheral Connections. 7 Remote Control Buttons.. 8 Installation Of The TFT TV To The Wall. 9 Preparation.. 11 Before Switching On Your TV.. 11 Power Connection.. 11 Connections To The Aerial Input Socket. 11 Inserting Batteries In The Remote Control Handset.. 11 Handling the Remote Control.. 11 Operating Range for the Remote Control.. 11 Switching The TV ON/OFF.. 12 Navigating the Menu System. 12 Initial Settings.. 12 Everyday Operation... 13 Information Banner.. 13 ELECTRONIC PROGRAMME GUIDE(EPG).. 13 Displaying The Subtitles.. 14 Teletext... 14 IDTV Menu System.. 14 Channel List.. 14 Navigating the whole channel list.. 15 Moving the channels in the channel list. 15 Deleting the channels in the channel list 15 Renaming channels.. 15 Adding locks to channels.. 16 Setting Favourites.. 16 Installation.. 17 Configuration.. 18 Timers.. 20 TV Setup.. 21 Common Interface... 21 Menu System... 22 Picture Menu.. 22 Mode.. 22 Contrast/Brightness/Sharpness/Colour/ Hue... 22 Colour Temp.. 22 Noise Reduction.. 22 Film Mode.. 22 Store... 22 Reset.. 22 Sound Menu.. 22 Volume.. 22 Equalizer.. 22 Balance... 22 Headphone.. 22 Sound Mode.. 23 AVL.. 23 Effect.. 23 Dynamic Bass... 23 3DS.. 23 SubWoofer.. 23 Store... 23 Feature Menu.. 23 Sleep Timer.. 23 Child Lock.. 23 Language.. 23 AV-2 Out.. 23 Default Zoom.. 24 Blue Background. 24 Menu Background.. 24 Menu Timeout.. 24 Teletext Language.. 24 Install Menu.. 24 Program... 24 Band... 24 Channel... 24 Colour System.. 24 Sound System.. 24 Fine Tune.. 24 Search.. 24 VCR.. 24 Store Program... 24 Program Menu.. 24 A.P.S. (Auto Programming System) Country... 25 Install menu in AV modes. 25 Source menu.. 26 PC Mode.. 26 Installation.. 26 Menu System in PC mode.. 26 Sound Menu/Feature Menu.. 26 PC Picture Menu.. 26 PC Picture Position Menu. 26 Autoposition.. 26 H (Horizontal) Position.. 26 V (Vertical) Position.. 26 Dot Clock.. 26 Phase.. 26 Sound in PC mode.. 26

English - 1 -

Other Features.. 27 TV Status.. 27 Mute Indicator.. 27 PIP and PAP modes.. 27 PAT... 27 AV Modes.. 27 Freeze Picture.. 27 Zoom Modes.. 27 Teletext.. 28 Connect Peripheral Equipment.. 29 High Definition.. 29 Via The Scart.. 29 Via Aerial Input... 29 Decoder.. 29 Connect a decoder with an aerial socket to the TV.. 29 Connect a decoder without an aerial socket to the TV.. 29 TV And Video Recorder. 29 Playback NTSC... 29 Copy Facility.. 29 Camera And Camcorder. 29 To Connect To AV Input. 29 To Connect To S-VHS Input.. 29 Connect The Decoder To The Video Recorder.. 29 Connecting Headphones (optional). 29 Audio Lineout.. 29 Connecting SubWoofer.. 29 Tips... 30 Care Of The Screen.. 30 Poor Picture... 30 No Picture.. 30 Sound.. 30 Remote Control... 30 Peripheral Equipment Connections. 31 Aerial Connection.. 31 Specifications... 32 S-input connector pin specifications. 34 HDMI connector pin specifications.. 34 SCART connector pin specifications. 34 Signal Input.. 34 PC RGB Terminal (D-sub 15-pin connector). 34 Appendix A: PC Input Typical Display Modes... 35 Appendix B: AV and HDMI Signal Compatibility.. 36 Appendix C: Main and PIP-PAP Picture Combinations... 37 Addendum to the instruction book. 37 UK Guarantee.. 38

English - 2 -

Safety Precautions
Please read the following recommended safety precautions carefully for your safety.

Dos and Donts

DOs This Television has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO consult your dealer if you are in any doubt about installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. This TV is supplied with a fitted mains plug. This plug must not be cut off as it may contain a special radio interference filter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate safety approved extension lead or consult your dealer. Observe the manufacturers instructions when connecting extension leads to the TV. Check the fuse rating on the new plug, this should be fitted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1 362) approvals, these are easily identifiable by either the or symbols. If you are in any doubt about the installation of an extension lead, please consult a competent electrician.

10. Waste Disposal

Instructions for waste disposal: Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children. Battery, including those which are heavy metal-free, should not be disposed of with household waste. Please dispose of used battery in an environmentally sound manner. Find out about the legal regulations which apply in your area. Cold cathode fluoresant lamp in LCD PANEL contains a small amount of mercury; please follow local ordinates or regulations for disposal. Information for users applicable in European Union countries

3. Moisture and Water

Do not use this equipment in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this equipment to rain or water, as this may be dangerous and do not place objects filled with liquids, such as flower vases, on top. Avoid from dripping or splashing. If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualified personnel before operating it any further.


Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.

5. Ventilation

The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway. This symbol on the product or on its packaging means that your electrical and electronic equipment should be disposed at the end of life separately from your household wastes. There are separate collection systems for recycling in EU. For more information, please contact the local authority or the dealer where you purchased the product.

6. Heat and Flames

The set should not be placed near to naked flames and sources of intense heat, such as an electric heater. Ensure that no naked flame sources, such as lighted candles, are placed on top of the TV. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

7. Lightning

In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.

8. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorized sub-

English - 4 -

11. Disconnect Device
The mains plug is used to disconnect TV set from the mains and therefore it shall remain readily operable.

_ or `

button to select an icon.
5- To exit the menu or return from sub-menu screen, press. These explanations are available for the navigation of the whole Menu System. To select options that are explained in the following parts, refer to Navigating The Menu System.

English - 12 -

After Automatic Search process is completed, the following message asking for analogue channel search appears on the screen. TV switches to the analogue TV mode:
name and times of the programme are not available then No Information Available is displayed in the information banner. If the selected channel is locked, you must enter the correct four digit key to view the channel.
Some, but not all, channels send information about the current and next events. Please note that event information is updated automatically. If there is no event information data available for channels, only channel name with No Information Available banner is displayed. Press GUIDE button to view the EPG menu. Select your Language, Country and Text language by using a / b and _ / ` buttons. Press OK button to continue. To cancel, press BLUE button. For more information on this process, see Install Menu section. Press or Programmes. buttons to navigate in Channels or
Press or buttons to navigate through the channel and programme list. In EPG Menu, you can easily see the extended help information by pressing the button and by pressing this button again you can close this window.

Everyday Operation

Pressing the TV/DTT button at any time while watching television programmes will switch the TV set between the digital terrestrial television broadcasting and the analogue broadcasting.

Information Banner

Whenever you change the channel using the P + or P - buttons or the number buttons, TV displays the channel picture along with an information banner at the bottom of the screen. This will remain on the screen for approximately three seconds. The information banner can also be displayed by pressing the button at any time while watching the TV. Pressing the button again removes the banner. In the EPG Menu all channels are displayed. The current channel is highlighted when you enter the EPG menu. or buttons to change the channel. Also Use press RED or GREEN buttons to make page up/down scroll for the channels. And press OK button to watch the highlighted channel. If you highlight an event, short event description, extended event description, start and finish time of the event are displayed on the screen. If you press OK button when a next event is highlighted, a reminder is set for the highlighted programme and a clock icon appears across the highlighted channel line as shown in the following EPG menu figure. Programme reminders is set to signal that a programme is about to start when you are watching another channel. If you set reminder to a programme,

Moving the channels in the channel list

Press or will be moved.

Press or buttons to select the Move item on Channel List menu. Move is written next to OK item to indicate that press OK to move the highlighted channel to the desired position on the channel list.

Press tion.

buttons to highlight the desired op-
If OK button is pressed while Yes is highlighted, the highlighted channel is deleted. Selecting No cancels the delete operation.

Renaming channels

To rename a specific channel, the channel must be or buttons and then highlighted via pressing highlight the Edit Name item by pressing or buttons. Press OK button to activate rename feature. Press OK button, the selected channel becomes highlighted. Use or buttons to select the new position of the channel and press OK button to place the channel to the selected position and return the menu.
Deleting the channels in the channel list
Press or will be deleted. buttons to select the channel that
Press or buttons to select the Delete item on Channel List menu. As seen on Channel List menu, Delete is written next to OK item at the bottom of the screen to indicate that press OK button to delete the highlighted channel in the channel list. Now pressing or buttons moves to the previous/next character. Pressing or buttons toggles the current character, i.e., b character becomes a on and c on. Pressing the numeric buttons 0.9 replaces the highlighted character with the characters printed above the key one by one as the button is pressed.

English - 15 -

Press the button to cancel the editing or OK button to save the new name.

Adding locks to channels

Channel Locking provides a password-protected access to channels selected by parents. In order to lock a channel you should know the Parental Lock password (default value is set to 0000 in the factory and can only be changed from the Configuration Menu). By pressing or buttons, highlight the channel to be locked and select the Lock option by pressing or buttons.Then press the OK button, a password box is displayed.
How To Add A Channel To A Favourite List:
By pressing / buttons, highlight the channel that you want to add to the favourite list. Select the list number by pressing / buttons.

After factory settings is loaded, First Time Installation menu will be displayed. The menu which is displayed for language selection appears on the screen at first. By using or buttons, select the desired language option, and press OK button to activate. After the language is selected, a message asking for automatic search start appears on the screen.


Press button to display the Main Menu and the button twice to highlight Configuration, then press OK button to display the Configuration menu. Press button to exit the menu.
Highlight Yes item by pressing or buttons and press OK button to start installation. After search is completed for digital channels, a message asking search for analogue channels appears on the screen.
Highlight Yes item by pressing or buttons and press OK button to searh for analogue channels.The following menu appears on the screen for analogue channel search.
The various configuration functions are displayed in a list, along with a quarter-screen image of the currently selected channel. You can select a function by highlighting the corresponding menu line using the or buttons.

English - 18 -

Audio Language Digital terrestrial television channels can broadcast simultaneous sountracks in more than one language. This function selects which language soundtrack you will hear when switching to a channel broadcasting with the multiple soundtracks. Use or options. buttons to cycle through the language
Whenever YELLOW button is pressed, Audio Language selection OSD will be displayed on the screen. Favourite Mode This function enables or disables the favourite channel list mode. Use or buttons to set Favourite Mode to List 1, List 2,., List 5 or Off. Selecting Off disables the favourite channel List mode. If the Favourite Mode is set on via selecting a channel list number, in normal operating mode pressing P + and P - buttons will only navigate through the channels that were previously defined as favourites in the selected channel list. Channel List In the Configuration Menu, highlight the Channel List item by pressing or buttons. Use the or buttons to set the Channel List to TV only or Radio only. This feature enables navigation only through the selected channel list type. If Radio only is set, you can only navigate through the Radio channels in the channel list via using P + or P - buttons. Language Settings In the configuration Menu, highlight the Language Settings item by pressing or buttons. Press OK and Language Settings sub menu will be displayed on the screen: There is only one key which is set to 0000 initially. Enter lock key. If wrong Lock key is entered, the following message is displayed on the screen and it is returned back. Subtitle Language Digital terrestrial television channels can broadcast with subtitles displayed on-screen for the hard-ofhearing. This function selects the desired subtitle language and enables the automatic display of subtitles whenever subtitle information is broadcast. Use or buttons to cycle through Off and language options. Parental Settings Some channels broadcast material which you do not want younger members of the family to watch. Any channel can be locked so that it cannot be selected for viewing without first a four-digit PIN code being entered. In this way any channel not suitable for younger viewers can be protected. This function enables or disables the menu protection system and allows the PIN code to be changed. Channel And Menu Protection Lock feature. Use or buttons to highlight Parental Settings. Press OK button to enter Parental Settings Menu. A box asking for the lock key is displayed.

If it is correct, the Parental Settings Menu including following items is displayed: Use or buttons to highlight the menu item that will be adjusted. System Language System Language determines the on-screen menu language. Use or setting. buttons to set the System Language Use or buttons to highlight the menu item that will be adjusted.

English - 19 -

Maturity Lock: Use or buttons to set Maturity Lock to the Off, Age 4, Age 5.Age17 or Age 18. (Off, Age 4, Age 5,., Age 18, above 6 years, Universal viewing (FRA) or X-rated ESP.) Menu Lock: There you can set/reset locking for the Main Menu or the Installation Menu to restrict access. If the menu lock is disabled, there will be free access to the menu system. Off: All menus are unlocked. Main Menu: Main menu is accessible only with the correct lock key. So the user cannot add, delete, rename, move channels, cannot set timers. Installation: Installation menu is locked, so the user cannot add channels. Changes will be updated after exiting Configuration Menu. Set Lock Key: Also in this menu you can change the lock key and set/change parental lock mode. Time Settings In the configuration Menu, highlight the Time Settings item by pressing or buttons. Press OK and Time Settings sub menu will be displayed on the screen: After the search progress is completed, the message Completed searching for upgrade. No new software was found appears on the screen if no new software is found. In the configuration menu, highlight the Receiver or buttons and Upgrade item by pressing press OK button to start upgrade process. The following menu appears on the screen.


Display the Main Menu by pressing the button. Highlight the Timers line by pressing or buttons and press OK button to display the Timer menu. Use or buttons to highlight the Time Zone
or butSetting. Time Zone Setting is set using tons. It can be set to AUTO or MANUAL. When AUTO is selected, Current Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone Setting, Time Zone could be altered: By pressing or buttons select Time Zone. or buttons to change the Time Zone beUse tween GMT-12 or GMT+12. Current Time on the top of the menu list will then change according to the selected Time Zone. Receiver Upgrade The IDTV can be upgraded via the configuration menu, entered from the main menu.

English - 21 -

Menu System

Picture Menu

By pressing a / b button, select Reset. Press _ / ` or OK button to reset the picture modes to factory default settings.

Sound Menu

By pressing a / b button, select Mode. Press _ / ` button to choose from one of these options: Cinema, Dynamic and Natural.
Contrast/Brightness/Sharpness/Colour/Hue By pressing a / b button, select the desired Option.


By pressing a / b select Volume. Press button to change the level of the Volume.
_ / ` button to set the level.
Hint: Hue is displayed in picture menu when the TV receives an NTSC signal.


By pressing a / b button, select Equalizer. Press / ` or OK button to enter equalizer menu.

Colour Temp

By pressing Press _ / ` to choose from one of these options: Cool, Normal and Warm.
a / b button select Colour Temp.
Noise Reduction By pressing a / b button select Noise Reduction.
Press _ / ` to choose from one of these options: Low, Medium, High or Off.
In equalizer menu the sound mode can be changed to User, Music, Movie, Speech, Flat and Classic by pressing _ / ` button. Select the desired frequency by a / b button and increase or decrease the frequency gain by pressing _ / ` button. Press the button to return to the previous menu. NOTE: Equalizer menu settings can be altered only when the Equalizer Mode is in User.

Film Mode

Films are recorded at a different number offrames per second to normal television programmes. By pressing Press _ / ` button to set this feature On or Off. Turn this feature on when you are watchingfilms to see the fast motion scenes clearly.


By pressing a / b select Balance.Press _ / ` button to change the level of the balance.Balance level can be adjusted between -32 and + 32.
a / b button, select Film Mode.


By pressing a / b button, select Headphone. Press ` button to enter hedphone menu.
By pressing Press ` or OK button to store the adjustments. Stored will be displayed on the screen.
a / b button select Store.


By pressing a / b button, select Volume. Press ` button to increase hp volume level. Press _ button to decrease hp volume level. Headphone volume level can be adjusted between 0 and 63.

English - 22 -

By pressing a / b button, select Balance. Press ` button to increase balance to the right. Press _ button to decrease balance to the left. Balance level can be adjusted between -32 and +32. Press the button to return to the previous menu.

Feature Menu

Sound Mode
By pressing a / b select Sound Mode. Press _ / ` button, you can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel supports that mode.
By pressing a / b select AVL. Press set the AVL as on or off.

_ / ` button to

By pressing a / b select Effect. Press set Effect as on or off.

` button to

Dynamic Bass
Dynamic Bass is used to increase bass effect of the TV set. By pressing a / b button, select Dynamic Bass. By pressing _ / ` button set Dynamic bass to Low, High or Off. It is not recommended to select High if listening at high volume levels.

Sleep Timer

By pressing a / b select Sleep Timer. Press button to set the Sleep Timer.
The timer can be programmed between Off and 120 minutes in steps of 10 minutes.

Child Lock

By pressing Press _ / ` button to set the Child Lock on or off.When on is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons will not work (except for the STANDBY button). Hence, if one of these buttons is pressed, Child Lock On will be displayed on the screen when the Menu screen is not visible.

a / b select Child Lock.

By pressing a / b button select 3DS. Press button to set 3DS as on or off.


It is possible to connect an external, active subwoofer to the set to give a much deeper bass effect. By pressing a / b button, select Subwoofer. Subwoofer can be set to On or Off. Dynamic Bass is not available if Subwoofer is set to On. Set Subwoofer to On when you connect an external subwoofer to the set.


By pressing a / b button, select Language.Use / ` button to select the language.
By pressing Press ` or OK button to store the adjustments. Stored will be displayed on the screen.
Available language options are; English, German, French, Turkish, Spanish, Danish, Swedish, Dutch, Italian, Greek, Portuguese, Norwegian, Finnish, Polish, Czech, Hungarian, Russian, Slovak, Slovenian, Rumanian, Bulgarian, Croatian, Serbian.

AV-2 Out

By pressing a / b select AV-2 Output. Use _ / ` button, to set Ext-2 Out to TV/DTT, AV-1, AV-3, AV-4, HDMI-1, HDMI-2 or PC RGB. NOTE: Only audio output is available for AV-3, AV-6, AV-7 and PC RGB. The other options have both audio and video outputs. If currently watched source is analogue TV, a connected device displays analogue TV source as well. If this source is set to digital mode, connected device displays digital source. In order to avail this function, AV-2 Out should be set to TV/DTT.

English - 23 -

Default Zoom
By pressing a / b button, select Default Zoom. You can set Default Zoom to Full, Panoramic, 4:3 or 14:9 Zoom by pressing _ / ` button.

_ / ` button or Digit ButEnglish - 24 -
By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except the AV mode). By cursor action, programme selection is done automatically.
To change the name of a decided programme, select the programme and press the RED button. The first letter of the selected name will be highlighted. Press a / b button to change that letter and _ / ` button to select the other letters. By pressing the RED button, you can store the name.
Whenever you press the BLUE button, A.P.S. function stops and Program Table appears on the screen. If you wait until the end of A.P.S., Program Table is displayed with the programmes found and located.

Install menu in AV modes

The following screen appears in the install menu:


Select the programme which you want to insert by navigation buttons. Press the GREEN button. By navigation buttons move the selected programme to the decided programme space and press the GREEN button again.


To delete a programme, press the YELLOW button. Pressing the YELLOW button again erases the selected programme from the programme list, and the programmes below shift one up.
APS (Auto Programming System)
When you press the BLUE button for APS, Auto Programming System Menu will appear on the Screen.
By pressing a / b select Colour System. By pressing _ / ` button, you can change the colour system to PAL, SECAM, PAL 60, NTSC 4,43, NTSC 3,58 or AUTO.
By pressing a / b select VCR. By pressing button, you can set the VCR to ON or OFF.
By pressing a / b button, select Store Program. Press ` or OK button to store the adjustments. Program Stored will be displayed on the screen.
A.P.S. (Auto Programming System) Country
Press _ / ` button to select your country. If you want to exit from A.P.S. function, press the BLUE button. When you press OK or RED button for starting APS, all stored programs will be erased and the following screen will be displayed:

English - 25 -

Source menu
By pressing a / b button, select the sixth icon and press ` or OK button. Source menu appears on the screen.


If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically. Select Autoposition item by using Press or OK button.
In source menu, highlight a source by pressing a / b button and switch to that mode by pressing ` or OK button. Source options are; TV, AV-1, AV-2, AV-2 S, AV-3, AV-4, AV-5, AV-6, AV-7, PC RGB and DTT.

a / b buttons.

PC Mode

Power off both computer and display before making any connections. Set your PCs resolution correctly before connecting to the TV. See the table on Appendix A on page 35. Use 15-pin display cable to connect a PC to the LCD TV.
Warning: Auto position adjustment recommended to be done with the full screen image for the proper adjustment.

H (Horizontal) Position

This item shifts the image horizontally to right hand side or left hand side of the screen. Select H Position item by using Use
_ / ` button to adjust the value.

a / b button.

V (Vertical) Position
This item shifts the image vertically towards the top or bottom of the screen. Select V Position item by using Use

Menu System in PC mode

Sound Menu/Feature Menu
The items in these menus are described at Sound & Feature Menu explained in Menu System.
` button to adjust the value.

Dot Clock

Dot Clock adjustments correct interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Use
PC Picture Menu By pressing a / b button, select the second icon. PC
Picture menu appears on the screen. Brightness, Contrast and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu in Analogue TV Menu System.
Depending on the resolution and scan frequency that you input to the TV Set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method. Use
PC Picture Position Menu By pressing a / b button, select the first icon and
press ` or OK button. PC Picture Position menu appears on the screen.

Sound in PC mode

Connect the PCs Audio output to the TVs PC Audio In socket with an audio cable.

English - 26 -

Other Features

TV Status

Programme Number, Programme Name, Sound Indicator and Zoom Mode are displayed on the screen when a new programme is entered or button is pressed.
While the PAP function is off, pressing switch the TV to PAT mode.

twice will

AV Modes
You can switch your TV to AV modes by using related buttons on the remote control. First, press button till INPUT OSD is displayed on the screen. You can then use; AV1, AV2, AV3, AV4, AV5, HDMI1 or HDMI2 buttons on your remote control to select the desired source (except being in teletext). Note that in PIP/PAP modes, pressing will directly change sources. button

Mute Indicator

It is placed in the upper side of the screen when enabled.
To cancel mute, there are two alternatives; the first one is pressing the button and the second one is increasing the volume level.

Freeze Picture

You can freeze the picture on the screen by pressing the button on the remote controller. At PIP and PAP layouts, only the main picture can be frozen.

PIP and PAP modes

Press the button to switch to PIP mode. At PIP Mode, a small picture (PIP picture) is displayed on the main picture. Aspect Ratio of the PIP window is fixed and 4:3. When PIP Mode is entered, the default active window is PIP window and the active window is indicated by a white frame around it. The active window can be changed by pressing _ / ` button. The status info OSD belongs to active window. The place of the status OSDs are same for both windows. Press the button again to switch PAP mode.

Zoom Modes

Zoom mode can be changed by pressing the Aspect ratio button. You can change the screen size according to the picture aspect ratio. Select the optimum one from the following ZOOM modes. NOTE: InYPBPR and HDMI modes,while in 720 and 1080 resolutions, Full 1 and Full 2 modes will be visible. NOTE: When in Full 1 mode; if picture defects in top and bottom lines occur because of the broadcast, switch to Full 2 mode to avoid. If such defects in the edges of picture are not experienced, it is advised that you watch in Full 1 mode. NOTE: You can only choose 4:3 and FULL in PC mode.
At PAP Mode, two pictures with equal sizes are displayed on the screen. Aspect Ratios of the windows are fixed. When you switch to PAP Mode, Main window in PIP Mode is displayed on the right side of the screen. The active window can be changed by pressing _ / ` button. Press the button again to exit the PAP mode.
When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode according to the WSS signal. When the AUTO mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, change to another ZOOM mode manually.
NOTE: In all HDMI modes, Pip and PAP are not visible. In YPbPr 1080i , Pip is not visible. NOTE: See Appendix C for all PIP/PAT modes.
In PAT (Picture and Text) mode, picture is splitted into two and text is displayed near the main picture. There are two ways available for switching to PAT mode: Pressing button while in teletext will switch the TV to PAT mode.

Audio Lineout

To connect the external speakers to your TV, use Line Outs of the TV. NOTE: While watching HDMI source, Lineout selection could only be the current source.
Connect a decoder with an aerial socket to the TV
Connect the aerial cable.

Connecting SubWoofer

Use SubWoofer Out socket to connect an external, active subwoofer to the set to give a much deeper bass effect.
Connect a decoder without an aerial socket to the TV
Connect the decoder to the EXTERNAL socket of TV with a RCA cable. Through the SCART/RCA socket of the decoder, you may attain a better display resolution.

TV And Video Recorder

Connect the aerial cables. Better picture quality can be obtained if you also connect a Scart cable to SCART sockets.

Playback NTSC

Connect NTSC VCR player to a Scart socket of the TV. Then, select the related source from the SOURCE menu.

Copy Facility

Source selection for VCR recording. Select Feature menu.

English - 29 -

Care Of The Screen
Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.

Poor Picture

Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or Teletext unrecognisable? Check if you have entered the correct frequency. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.

No Picture

Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer. No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control?Try once more.
You can not hear any sound. Did you perhaps interrupt the sound, pressing the button? Sound is coming from only one of the speakers.Is the balance set to one extreme? See Sound menu.



BH-505 CA-520 KX-TSC11W DMC-FZ30PP ER-HM650 Asus AIL AX-300 CU-HE9GKE SMT-1921P Eo-ettl BTP140 CTK-50 4200DTN Edius HR2898 9314 TS MC115 Control Becker Z103 P5GPL-X P4S333-VF XD3500 01V96V2 NV-U50T Snowthrower LS-T246CEL Machine DSC-P150 BC700 Liquid LL 63 Snap S8100 FD ESL499 SX10 IS Review Flojet 2100 IC-T81E S8300 VSX7000 SK1XG I945GTM-vhl0602a1 LM729 Kxtg2511FX Autocad MEP NV-GS120EG EX532 KRF-V6020 SX410 Attachment SGH-F480V DI Moka Samsung ST70 Cobra 37ST 41260 700 Plus ERS-7853B 147 X KV-29LS35K CH-3988 SB908WL C1100 ZKT623LX RHT499H XC102 42LH30 LH-T6740D Thinkpad Z61T ICD-SX77 RX-D26 Droid Laserjet 5L Axiom 49 GT-E1360 Vice City HD4QN20RE Compiere MS7177C Missouri DJ70 A720 IS Nokia 8310 KX-FC258PD IC-720 MY521X K10ledvh MC-7644AS 4100B Digimax L60 SRP-265 MS-7379 DSP9024 Monster-1999 X125- MAL783W NP-NB30-ja01 P2250 WL-520G IC-F30LT PRO 7 NV-GS80E 41804


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101