Reviews & Opinions
Independent and trusted. Read before buy Hitachi PJ-TX300E!

Hitachi PJ-TX300E

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Hitachi PJ-TX300E, size: 7.6 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

About Hitachi PJ-TX300E
Here you can find all about Hitachi PJ-TX300E like manual and other informations. For example: review.

Hitachi PJ-TX300E manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Hitachi PJ-TX300E please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Hitachi PJ-TX300E photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Projector

PJ-TX300E
Users Manual - Operating Guide
Thank you for purchasing this projector. Please read this users manual thoroughly to ensure the proper use of this product.
ENGLISH FRANAIS DEUTSCH ESPAOL ITALIANO
Manuel d'utilisation - Guide d'utilisation
Merci davoir achet ce projecteur. Veuillez lire ce manuel dutilisation entirement, pour vous assurer que vous utiliserez correctement ce produit.
Bedienungsanleitung - Benutzerhandbuch
Herzlichen Glckwunsch zum Kauf dieses Projektors. Bitte lesen Sie sich diese Bedienungsanleitung sorgfltig durch, um richtige und sichere Verwendung dieses Produkts sicherzustellen.
Manual de usuario - Gua de funcionamiento Manuale d'istruzioni - Guida operativa
Muchas gracias por la adquisicin de este proyector. Lea detenidamente el manual del usuario para asegurarse de usar apropiadamente este producto. Vi ringraziamo per avere acquistato questo proiettore. Per garantirne l'impiego corretto vi raccomandiamo di leggerne a fondo il manuale d'istruzioni.
User's Manual - Safety Guide
Thank you for purchasing this projector.
WARNING Before using, read these user's manuals of this projector to ensure correct usage through understanding. After reading, store them in a safe place for future reference. Incorrect handling of this product could possibly result in personal injury or physical damage. The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage defined in these manuals of this projector. NOTE The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual. The reproduction, transmission or use of this document or contents is not permitted without express written authority.

About The Symbols

V arious symbols are used in this manual, the users manual and on the product itself to ensure correct usage, to prevent danger to the user and others, and to prevent property damage. The meanings of these symbols are described below. It is important that you read these descriptions thoroughly and fully understand the contents.

WARNING CAUTION

Typical Symbols
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. This symbol indicates information that, if ignored, could result possibly in personal injury or physical damage due to incorrect handling.
T his symbol indicates an additional warning (including cautions). An illustration is provided to clarify the contents. T his symbol indicates a prohibited action. The contents will be clearly indicated in an illustration or nearby (the symbol to the left indicates that disassembly is prohibited). T his symbol indicates a compulsory action. The contents will be clearly indicated in an illustration or nearby (the symbol to the left indicates that the power plug should be disconnected from the power outlet).

Safety Precautions

WARNING
Never use the projector if a problem should occur.
Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer. Never attempt to make repairs yourself because this could be dangerous. The power outlet should be close to the projector and easily accessible.
Disconnect the plug from the power outlet.
Use special caution for children and pets.
Incorrect handling could result in fire, electrical shock, injury, burn or vision problem. Use special caution in households where children and pets are present.
Do not insert liquids or foreign object.
Penetration of liquids or foreign objects could result in fire or electrical shock. Use special caution in households where children are present. If liquids or foreign object should enter the projector, immediately turn off the power switch, disconnect the power plug from the power outlet and contact your dealer. Do not place the projector near water (ex. a bathroom, a beach, etc.). Do not expose the projector to rain or moisture. Do not place the projector outdoors. Do not place flower vases, pots, cups, cosmetics, liquids such as water, etc on or around the projector. Do not place metals, combustibles, etc on or around the projector. o avoid penetration of foreign objects, do not put the projector into a case T or bag together with any thing except the accessories of the projector, signal cables and connectors.
Never disassemble and modify.
The projector contains high voltage components. Modification and/or disassembly of the projector or accessories could result in fire or electrical shock. Never open the cabinet. Ask your dealer to repair and clean insider.
Do not give the projector any shock or impact.

Do not disassemble.

If the projector should be shocked and/or broken, it could result in an injury, and continued use could result in fire or electrical shock. If the projector is shocked, immediately turn off the power switch, disconnect the power plug from the power outlet and contact your dealer.
Do not place the projector on an unstable surface.
If the projector should be dropped and/or broken, it could result in an injury, and continued use could result in fire or electrical shock. Do not place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined stand. Use the caster brakes placing the projector on a stand with casters. Do not place the projector in the side up position, the lens up position or the lens down position. In the case of a ceiling installation or the like, contact your dealer before installation.

Safety Precautions (continued)
Be cautious of High temperatures of the projector.
High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn. Take care of ventilation. Keep a space of 30 cm or more between the sides and other objects such as walls. Do not place the projector on a metallic table or anything weak in heat. Do not place anything about the lens, air fans and ventilation openings of the projector. Never block the air fan and ventilation openings. Do not cover the projector with a tablecloth, etc. Do not place the projector on a carpet or bedding.
Never look through the lens or openings when the lamp is on.
The powerful light could adversely affect vision. Use special caution in households where children are present.
Use only the correct power cord and the correct power outlet.
Incorrect power supply could result in fire or electrical shock. Use only the correct power outlet depending on the indication on the projector and the safety standard. The enclosed power cord must be used depending on the power outlet to be used.
Be cautious of the power cord connection.
Incorrect connection of the power cord could result in fire or electrical shock. Do not touch the power cord with a wet hand. Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to clean the power plug. Insert the power plug into a power outlet firmly. Avoid using a loose, unsound outlet or contact failure.
Be sure to connect with ground wire.
Connect the ground terminal of AC inlet of this unit with the ground terminal provided at the building using the correct power cord; otherwise, fire or electric shock can result. Dont take the core of power cord away.
Surely connect the ground wire.
Be careful in handling the light source lamp.
The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break with a loud bang, or burn out. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projectors vent holes.

Please carefully read the section Lamp. Be careful in handling the power cord and external connection cables.
If you keep using a damaged the power cord or cables, it can cause a fire or electrical shock. Do not apply too much heat, pressure or tension to the power cord and cables. If the power cord or cables is damaged (exposed or broken core wires, etc.), contact your dealer. Do not place the projector or heavy objects on the power cord and cables. Also, do not place a spread, cover, etc, over them because this could result in the inadvertent placing of heavy objects on the concealed power cord or cables. Do not pull the power cord and cables. When connecting and disconnecting the power cord or cables, do it with your hand holding the plug or connector. Do not place the cord near the heater. Avoid bending the power cord sharply. Do not attempt to work on the power cord.
Be careful in handling the battery of the remote control.
Incorrect handling of the battery could result in fire or personal injury. The battery may explode if not handled properly. Keep the battery away from children and pets. If swallowed consult a physician immediately for emergency treatment. Do not allow the battery in a fire or water. Avoid fire or high-temperature environment. Do not hold the battery with the metallic tweezers. Keep the battery in a dark, cool and dry play. Do not short circuit the battery. Do not recharge, disassemble or solder the battery. Do not give the battery a physical impact. Use only the battery specified in the other manual of this projector. Make sure the plus and minus terminals are correctly aligned when loading the battery. If you observe a leakage of the battery, wipe out the flower and then replace the battery. If the flower adheres your body or clothes, rinse well with water. Obey the local laws on disposing the battery.

CAUTION

Be careful in moving the projector.
Neglect could result in an injury or damage. Do not move the projector during use. Before moving, disconnect the power cord and all external connections, and close the slide lens door or attach the lens cap. Avoid any impact or shock to the projector. Do not drag the projector. or moving the projector, use the enclosed case or bag if provided. F
Do not put anything on top of the projector.
Placing anything on the projector could result in loss of balance or falling, and cause an injury or damage. Use special caution in households where children are present.
Do not attach anything other than specified things to the projector.

Disconnect the plug from the power outlet
Warranty And After-Service
Unless seen any abnormal operations (mentioned with the first paragraph of WARNING in this manual), when a problem occurs with the equipment, first refer to the Troubleshooting section of the Operating Guide, and run through the suggested checks. If this does not resolve the problem contact your dealer or service company. They will tell you what warranty condition is applied.
Users Manual Operating Guide

ENGLISH

Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual - Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. NOTE The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual. The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent. Trademark acknowledgment VGA and XGA are registered trademarks of International Business Machines Corporation. Mac is registered trademarks of Apple Computer, Inc. VESA and SVGA are trademarks of Video Electronics Standard Association. Windows is a registered trademark of Microsoft Corporation. HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other trademarks are the properties of their respective owners.

Content

Before use... 4 Projector features.... 4 About this manual.... 4 About contents of package... 5 Part names.... 6 Projector... 6 Controls buttons... 7 Ports.... 7 Remote control... 8 Preparations... 9 Fastening the lens cover... 9 Arrangement.... 10 Adjusting the projectors elevation.. 12 Connecting your devices... 13 With a VCR/DVD player.... 13 For HDMI signal source.... 14 For DVI signal source... 14 For a SCART RGB input... 14 With a computer.... 15 Example of computer signal... 16 Connecting a power supply.. 17 Loading batteries into the remote control... 18 Using the remote control... 19 Using the remote control button lights... 19 Projection... 20 Turning the power on.... 20 Selecting an input signal... 21 Automatically adjusting the picture... 21 Adjusting the display position... 22 Adjusting the zoom... 22 Adjusting the focus... 22 Turning the power off.... 23 Basic operation... 24 ASPECT.... 24 IRIS... 25 MODE.... 26 BLACK.... 27 BRIGHTNESS, CONTRAST, COLOR... 27 MY MEMORY... 28 EASY MENU... 30 EASY MENU operation... 30
(EASY MENU)... 30 EASY MENU functions... 31 ASPECT.... 31 MODE, BLACK... 32 BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, MIRROR.. 33 RESET, LANGUAGE, Go To Advance Menu.. 34 Advanced Menu... 35 Advanced Menu operation... 35 PICTURE menu... 37 BRIGHTNESS, CONTRAST, GAMMA.. 37 COLOR TEMP.... 39 COLOR, TINT, SHARPNESS... 40 IRIS, BLACK, MY MEMORY... 41 IMAGE menu.... 43 ASPECT, OVER SCAN... 43 V POSITION, H POSITION, H PHASE, H SIZE, AUTO ADJUST. 44 INPUT menu.... 45 PROGRESSIVE, COLOR SPACE... 45 COMPONENT, VIDEO FORMAT, HDMI, FRAME LOCK.. 46 S-ASPECT, INFORMATION... 47 SETUP menu... 48 KEYSTONE, WHISPER, MIRROR.. 48 SCREEN menu... 49 LANGUAGE, MENU POSITION, OSD BRIGHT... 49 START UP, MyScreen... 50 MyScreen Lock, MESSAGE... 51 DIGITAL SHUTTER... 52 OPTION menu.... 53 AUTO OFF, LAMP TIME, FILTER TIME... 53 SERVICE (FAN SPEED, GHOST, STRIPE).. 54 SERVICE (FILTER MESSAGE, FACTORY RESET).. 55 Maintenance... 56 Lamp.... 56 Air lter... 58 Inside of the projector... 60 Lens... 60 Cabinet and remote control.. 60 Troubleshooting... 61 Related message.... 61 Regarding the indicator lamps... 62 Phenomena that may be easily mistaken as machine defects. 64 Warranty and after-service... 67 Specications.. 67 Dimension diagram... 68 Glossary... 69

Before use

Before use Projector features
This projector is used to project computer and NTSC/PAL/SECAM video signals onto a screen. It requires only a small amount of space for installation and projects a large image from even a short distance. The following features will turn any room into a High Denition Theater. Super Focus ED (Extra-low dispersion) lenses are used for the highest possible image quality. 720P wide LCD panels are used for faithful reproduction of high denition images. Motorized iris control provides lm-like images with a darker black. The 1.6x zoom lens and optical lens shift feature allow for exibility of installation and viewing position.

About this manual

Various symbols are used throughout this manual. The meanings of these symbols are described below. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. CAUTION This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling. To ensure proper use, please take special notice of information NOTE provided following this symbol. See the pages noted after this symbol for more information about the current topic.
About contents of package

(1) Projector....

Your projector should come with the items shown below. Check to make sure that all the items are included. Contact your dealer immediately if anything is missing.
(2) Lens cover, rivet and strap.
(3) Power cord... (4) Component video cable..

POWER LIGHT

(5) SCART adapter (PJ-TX200E only) (5) Remote control and 2 AAA batteries..

BLACK ASPECT

MEMORY IRIS

BRIGHT CONTRAST COLOR

HDMI COMPO

PC S-VIDEO

AUTO VIDEO

(6) Users manuals..

WARNING Do not place the projector on an unstable surface. NOTE Keep the original packing materials for future reshipment. Be sure to use the original packing material when moving the projector. Use special caution for the lens. Use the original cushion for the lens.

Cushion for the lens

Part names
Zoom ring (22) Focus ring (22) Exhaust vent Do not block or cover the projector's vents. To avoid being burnt, please do not touch areas near the vents while the projector is in use or immediately after use. Lens (9, 60) A bright light for projecting is emitted from the lens. Please do not look into the lens while the projector is in use. Elevator feet (12) Lamp cover (57) Covers the lamp. The lamp has a nite product life. Preparation of a new lamp and early replacement are recommended. Intake vent Do not place anything that may be sucked into or stick to the vents underneath the projector. (Bottom view) Control buttons See next page. Exhaust vent Do not block or cover the projector's vents. To avoid being burnt, please do not touch areas near the vents while the projector is in use or immediately after use. (Rear left view) Elevator foot (12) Elevator button (12) Elevator button (12) Horizontal lens shift dials (22) Vertical lens shift dials (22) Filter cover (58) Covers the air lter and intake vent. Maintain the air lter to ensure proper ventilation.

For 16:9 screens

(a) Screen size inch (m) 30 (0.8) 40 (1.0) 50 (1.3) 60 (1.5) 70 (1.8) 80 (2.0) 90 (2.3) 100 (2.5) 120 (3.0) 150 (3.8) 200 (5.1) 250 (6.4) 300 (7.6) (a) Screen size inch (m) 30 (0.8) 40 (1.0) 50 (1.3) 60 (1.5) 70 (1.8) 80 (2.0) 90 (2.3) 100 (2.5) 120 (3.0) 150 (3.8) 200 (5.1) 250 (6.4) 300 (7.6)
(b) Projection distance min. max. m (inch) m (inch) 0.8 (32) 1.3 (52) 1.1 (43) 1.8 (70) 1.4 (54) 2.3 (89) 1.7 (66) 2.7 (107) 2.0 (77) 3.2 (125) 2.2 (89) 3.6 (143) 2.5 (100) 4.1 (161) 2.8 (111) 4.6 (179) 3.4 (134) 5.5 (215) 4.3 (168) 6.9 (270) 5.7 (224) 9.2 (360) 7.1 (281) 11.5 (451) 8.6 (337) 13.8 (541) (b) Projection distance min. max. m (inch) m (inch) 1.0 (39) 1.6 (65) 1.4 (53) 2.2 (87) 1.7 (67) 2.8 (109) 2.1 (81) 3.3 (131) 2.4 (95) 3.9 (153) 2.8 (109) 4.5 (175) 3.1 (122) 5.0 (198) 3.5 (136) 5.6 (220) 4.2 (164) 6.7 (264) 5.2 (206) 8.4 (330) 7.0 (275) 11.2 (441) 8.7 (344) 14.0 (552) 10.5 (413) 16.8 (663)
(c) Screen height cm (inch) 37 (15) 50 (20) 62 (25) 75 (29) 87 (34) 100 (39) 112 (44) 125 (49) 149 (59) 187 (74) 249 (98) 311 (122) 374 (147) (c) Screen height cm (inch) 46 (18) 61 (24) 76 (30) 91 (36) 107 (42) 122 (48) 137 (54) 152 (60) 183 (72) 229 (90) 305 (120) 381 (150) 457 (180)

For 4:3 screens

CAUTION Avoid smoky, humid and dusty places (e.g. near a humidier, a smoking area, a kitchen etc.) Placing the projector in such a place could cause re, electric shock and/or projector malfunction. Adjust the position of the projector so that light does not shine directly on the projector's remote sensor. The manufacturer strongly recommends avoiding any magnetic contact that is not shielded or protected on or near the projector itself. (e.g. Magnetic Security Devices, or other projector accessories that contain magnetic material that has not been provided by the manufacture etc.) Magnetic objects may cause interruption of the projector's internal mechanisms which may interfere with cooling fan speed or cause the fans to stop, and may cause the projector to shut down completely.
Refer to the illustrations and tables below to determine the screen size and projection distance. The values shown in the table are calculated (10%) for a full size screen at 1280x720.
Adjusting the projectors elevation
The elevator feet can be used to make adjustments if the surface on which the projector is set is uneven or if the projection angle needs to be otherwise adjusted. The adjustment range of the elevator feet is 0 to 7 degrees. elevator 1. Press and hold in the the projector. buttons while holding

When using the remote control in the dark, the buttons of the remote control can light up. LIGHT turns the remote 1. Pressing the on. Thebutton will automatically control after button lights lights turn off a short time.

LIGHT button

CAUTION Be careful when handling the remote control. Incorrect handling could cause damage and/or malfunction. Do not drop, hit or otherwise jar the remote control in anyway. Do not get the remote control wet or place it on wet objects. If you will not use the remote control for an extended period, remove the batteries from the remote control and store them in a safe place. NOTE If the remote control starts to malfunction, replace the batteries. The remote control may not function correctly if strong light (such as direct sunlight) or light from an extremely close range (such as from an inverter uorescent lamp) shines on the projectors remote sensor. Adjust the position of the projector so that light does not shine directly on the projector's remote sensor.

Remote control sensor

Projection
Projection Turning the power on

STANDBY/ON

STANDBY/ON button POWER button
HDMI COMPO PC S-VIDEO AUTO VIDEO

POWER indicator

1. Make sure that the power cord is rmly and correctly connected to both the projector and power outlet. 2. Open the lens cover, and set the power switch to the ON position.
The power indicator will light a steady orange. Then wait several seconds because buttons may not function for the rst several seconds the projector is turned on. Press the STANDBY/ON button on the projector or the POWER button on the remote control. The projector lamp will light up and the POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light a steady green.

( Steady orange)

Blinking in green

Steady green

WARNING When the power is on, a strong light is emitted. Do not look into the projector lens or openings. NOTE Turn the power on in the correct order. Turn on the projector before the connected devices.

1.CUSTOM1

When the current settings are not saved to memory the following dialog is displayed.
Temporarycondition ENTER ENTER;Savetheseparameters MEMORY;Recallsavedparameters MEMORY ;Quit
settings press the MEMORY button. 2. To load saved adjustmentbutton, one of the saved adjustments is loaded, in Each time you press the the following order. Memories in which no data is saved are skipped. 1. CUSTOM-1 2. CUSTOM-2 3. CUSTOM-3 4. CUSTOM-4 When there are no saved adjustment settings the following dialog is displayed.

Nosaveddata

NOTE Adjustment settings cannot be loaded when there are no saved adjustment settings. The numbers to the left of each memory cannot be changed but the name to the right can be changed. The MY MEMORY function can also be accessed via the PICTURE menu in the Advanced Menu (41).
To save adjustment settings Note that if the MESSAGE function (51) is inactive, the following procedure cannot be performed and the projector will load saved adjustment settings as soon as the MEMORY button is pressed. When the MESSAGE function is inactive please use the MY MEMORY function in the PICTURE menu (42) to save adjustment settings. When the MESSAGE function is active, the MY MEMORY menu can be displayed using the following procedure. The MY MEMORY menu displayed is the same as in the PICTURE menu. You cannot only save adjustment settings but also change and rename previously saved adjustment settings via this menu. the MEMORY button 1. Pressprojector will display a once. to indicate the current adjustment settings. The dialog When the current adjustment settings are from one of the saved memories a dialog shows which memory is being used.

MYMEMORY

:SELECT
the ENTER button while the dialog displayed to 2. Pressthe MY MEMORY menu and save toisthe currently open selected memory. refer MEMORY under PICTURE 3. Please(42)to the MY informationitemusing the MY menu for more on MEMORY menu.
NAMECUSTOM1 BRIGHTNESS0 CONTRAST0 GAMMASTANDARD COLORTEMP6500K COLOR+0 TINT+0 SHARPNESS+3 IRIS10 BLACKTURNOFF WHISPERNORMAL DIGITALSHUTTERTURNOFF SAVE

STANDARD Suitable for a wide range of sources. LOW GAMMA STANDARD This mode emphasizes the reproducibility of lower LOW tones. HIGH HiCONTRAST CUSTOM1 HIGH CUSTOM2 CUSTOM3 This mode emphasizes the reality of the image. CUSTOM4 Hi-CONTRAST This mode emphasizes the contrast of the image. CUSTOM-1, CUSTOM-2, CUSTOM-3, CUSTOM-4 These modes can be customized based on one of the pre-set modes. (Continued on next page) GAMMA 37
Description To adjust a CUSTOM mode (1) Select one of the CUSTOM modes to adjust using the / cursor buttons. Then press the cursor button to display the CUSTOM dialog. (2) Select the base mode to be adjusted using the / cursor buttons. Note that changing the base mode and pressing the cursor button in the CUSTOM dialog will erase the current settings of the selected mode. If you want to keep the settings, please press the cursor button to return to the preceding menu, and select a different CUSTOM mode. Then press the cursor button to display a dialog with 9 adjustment bars. Each bar corresponds to the tone of each of 9 gamma steps. The names of selected mode and the base mode are shown at the bottom of the dialog.

ENTER:

CUSTOM1

Select thereference

Continuation of "GAMMA"
STANDARD LOW HIGH HiCONTRAST CUSTOM1 CUSTOM2 CUSTOM3 CUSTOM4
STANDARD LOW HIGH HiCONTRAST
MIDDLE +0 +0 +0 +0 +0 +0 +0 +0 LOW CUSTOM CUSTOM1[STANDARD]
(3) Pressing the ENTER button while the dialog is displayed displays a test pattern to aid in adjusting. This projector has 3 types of test pattern. Each time you press the ENTER button, the test pattern is changed. Each part of the 9 step gray scale is linked to the corresponding adjustment bar in the dialog.
MIDDLE +0 +0 +0 +0 +0 +0 +0 +0 +0 LOW CUSTOM CUSTOM1[STANDARD]
(no display) 9 step gray scale

15 step gray scale

(4) Select the adjustment bar for the step to adjust using the / cursor buttons. Note that pressing the cursor button while the number 1 adjustment bar is selected closes the dialog and returns to the GAMMA menu. (5) Adjust the tone of the selected step using the / cursor buttons. (Continued on next page)

Description This projector provides 4 pre-set modes and 4 custom color temperature modes. To select a mode Using the / cursor buttons in the COLOR TEMP menu changes the color temperature mode. The mode that the yellow highlight bar is on is the currently selected mode. 6500K 7500K 9300K Hi-BRIGHT CUSTOM-1 CUSTOM-2 CUSTOM-3 CUSTOM-4 6500K, 7500K, 9300K COLORTEMP These modes set the same color temperature as 6500K the mode name. 7500K 9300K HiBRIGHT Hi-BRIGHT CUSTOM1 CUSTOM2 The mode is prepared thinking much of the CUSTOM3 brightness of the image with the maximum gains of CUSTOM4 all colors. CUSTOM-1, CUSTOM-2, CUSTOM-3, CUSTOM-4 These modes can be customized based on one of the pre-set modes. To adjust a CUSTOM mode (1) Select one of the CUSTOM modes to adjust using the / cursor buttons. Then press the cursor button to display the CUSTOM dialog. Note that pressing the // cursor buttons or the ENTER button in the CUSTOM dialog will erase the current settings of the selected mode. If you want to keep the settings, please press the cursor button to return to the preceding menu, and select a different CUSTOM mode. (2) Select the base mode to be adjusted using the / cursor buttons. Then press the cursor button to display a dialog with 3 sets of 3 adjustment bars. Each set corresponds to a step of the color temperature, and every set has 3 adjustment bars for red, green and blue. The names of selected mode and the base mode are shown at the bottom of the dialog.

COLOR TEMP

COLORTEMP

LOW R G B R

MID G B R

HIGH G B

6500K 7500K 9300K HiBRIGHT CUSTOM1 CUSTOM2 CUSTOM3 CUSTOM4
6500K 7500K 9300K HiBRIGHT
OFFSET HIGH R G B MIDDLE +0 +0 +0 +0 +0 +0 +0 +0 LOW CUSTOM CUSTOM1[7500K]
Description (3) Pressing the ENTER button while the dialog is displayed displays a test pattern to aid in adjusting. This projector has 3 types of test pattern. Each time you press the ENTER button, the test pattern is changed. Each part of the 9 step gray scale is linked to the corresponding adjustment bar in the dialog.
ENTER: LOW MID HIGH R G B R G B R G B
Continuation of "COLOR TEMP"
OFFSET HIGH R G B R MIDDLE +0LOW +0 +0 +0 +0 +0 +0 +0 +0 CUSTOM CUSTOM1[7500K]
OFFSET HIGH R G B R MIDDLE +0LOW +0 +0 +0 +0 +0 +0 +0 +0 CUSTOM1[7500K] CUSTOM
(4) Select the adjustment bar for the color element to adjust using the / cursor buttons. Note that pressing the cursor button while the adjustment bar of the LOW steps R is selected closes the dialog and turns it into the COLOR TEMP menu. (5) Adjust the tone of the selected step using the / cursor buttons. Using the / cursor buttons adjusts the picture. Stronger Weaker - NOTE The COLOR function can only be used for video, s-video, component video or HDMI signals. The COLOR function can also be accessed using the COLOR buttons on the remote control (27) or via the EASY MENU (33). Using the / cursor buttons adjusts the picture. Greenish Reddish - NOTE The TINT function can only be used for video, s-video, component video or HDMI signals. The TINT function can also be accessed via the EASY MENU (33). Using the / cursor buttons adjusts the picture. Stronger Weaker - NOTE The SHARPNESS function can also be accessed via the EASY MENU (33).

A lamp has a nite product life. Using the lamp for long periods of the time could cause the picture to become darker or the color tone to become poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To purchase a new lamp, contact your dealer and tell the lamp type number = DT00665.
1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes.
If the mounted 2. Prepare a new lamp.dealer projector isthe lamp. on the ceiling, or if the lamp has broken, ask the to replace Replacing the lamp by yourself
Bottom of the projector Screw
After making sure that the projector has adequately cooled, slowly turn the projector over so that the bottom is facing up.
the screw (marked by 4. Loosen thenlamp coverlift the lamp cover. the arrow), slide and Loosen the 2 lamp screws (marked by the arrow), and slowly lift the lamp by the handles. Be careful when handling the lamp. Breaking the lamp could cause injury and the release of gas containing mercury.

Lamp cover Screw

the new screws 6. Insertloosened lamp, and retighten the lock it inthat were in the previous step to place. the lamp cover into place, and 7. Slide cover screw loosened in step 4.retighten the lamp reconnect the projector 8. Please reposition andprojector on (20). ( 12-17). Then turn the LAMP TIME in the 9. Reset the the MENU button toOPTIONamenu (53). are using the Advanced (1) Press display menu. If you

Handles

Menu skip the next step (2). (2) To switch from the EASY MENU to the Advanced Menu, select the Go To the Advanced Menu item in the EASY MENU using the / cursor buttons, then press the cursor button. The Advanced Menu will appear. (3) Select the OPTION item in the left column of the Advanced Menu using the / cursor buttons then press the cursor button.
(4) Select the LAMP TIME item in the right column of the Advanced Menu using the / cursor buttons, then press the cursor button and the LAMP TIME menu will appear. (5) Pressing the cursor button in the menu resets the LAMP TIME. NOTE Only reset the LAMP TIME item when you have replaced the lamp so that the LAMP TIME remains accurate.

Air lter

If the air lter becomes clogged by dust or the like, internal temperatures will rise and could cause re, burn and/or projector malfunction. When the indicators or a message prompts you to clean the air lter, make sure to clean it as soon as possible. Check and clean the air lter periodically, even if no message is displayed. Please replace the air lter when it is damaged or too dirty to be cleaned. Preparation of a new air lter is recommended. To purchase a new air lter, contact your dealer and tell the air lter type number = NJ22632. Replace the air lter when the lamp is replaced. An air lter of the specied type will be included with replacement lamps for this projector.

Phenomenon Flicker appears on the screen.

Projector is very noisy.

Cases not involving a machine defect AUTO1 or AUTO2 is selected for the BLACK mode. Please set the BLACK mode to TURN OFF using the BLACK button (27) or the BLACK item in the PICTURE menu (41). The WHISPER function is working. The WHISPER function may cause screen icker. Set the WHISPER item (48) in the SETUP menu to NORMAL. The fan speed has been automatically changed. When the ambient temperature is, the projector will automatically raise the cooling fan speed to keep the internal temperature stable. Lower the ambient temperature. If you want to reduce noise more, set the WHISPER item (48) in the SETUP menu to WHISPER.
NOTE Although bright spots, dark spots, uneven color or misconvergence may appear on the screen, these are common characteristics of liquid crystal displays, and do not constitute or imply a machine defect.
Warranty and after-service / Specications
Warranty and after-service
When a problem occurs with the equipment, rst refer to Troubleshooting (62-66) and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.

Specications

Item Product name Liquid crystal panel Lens Lamp Power Supply Power Consumption Temperature range Size Weight (mass) Panel size Drive system Pixels Liquid crystal projector 1.8 cm (0.7 Type) TFT active matrix 921,600 pixels (1280 horizontal x 720 vertical) Zoom lens F=1.7 ~ 2.4 f = 20.0 ~ 31.9 mm 150W UHB AC100-120V/2.4A, AC220-240V/1.3A 220W 5 ~ 35C (Operating) 340 (W) x 113 (H) x 299 (D) mm (Not including protruding parts) 4.7 kg RGB input port: COMPUTER.. D-sub 15pin mini shrink jack x 1 Digital input port: HDMI.. HDMI connector x 1 Communication port: CONTROL...D-sub 9pin plug x 1 Video input port: VIDEO... RCA jack x 1 S-VIDEO.. Mini DIN 4pin jack x 1 COMPONENT VIDEO.. RCA jack x 3 Other port: TRIGGER (12V/25mA)... x 1 Lamp Air lter Others DT00665 NJ22632 Please consult your dealer. Specication

doc1

Projectors

/ CRT, LCD and DLP varieties / The biggest pictures youll ever see / 4:3 or widescreen aspect ratios / HD Ready
FOR MANY PEOPLE, a video projector is simply the ultimate way to enjoy the cinema experience in the home. The technology allows you to bring incredible images into your viewing room, with screen sizes measured in feet rather than inches. There are three main technologies CRT, LCD and DLP, but they share some common characteristics. Projectors take a video signal and project it onto a screen. The further from the screen the projector is, the bigger the image can be, and projectors are available that can throw truly massive pictures. Once extremely expensive, LCD and DLP models lowered the price for a good projector down to levels comparable with ordinary TV sets. Most projectors now come in the widescreen aspect ratio, but 4:3 models are still out there. screen to make a colour image. Capable of quite superb pictures, they also require painstaking setup and cannot be moved once installed without going through the entire lengthy setup procedure again.
Screens and why you need one
You should not be tempted to project onto a white wall. Although pictures will probably still appear watchable, you are not maximising the full potential of your projector. You will be losing a large percentage of the light from the projector, which will simply be absorbed on the surface of the wall. A dedicated screen, however, will bounce much more of the light back at you and will make the picture even more dynamic. Alternatively you can buy a special acrylic paint called Goo, which can be applied to any at, rigid surface to turn it into an effective projection screen.
HDMI The most superior input. Most commonly used for HD sources VGA input Used for connecting a PC for presentations or gameplay
LCD projectors benet from portability and extremely easy setup. You can simply place them on a at surface, switch them on, adjust the focus and youre ready to start watching. The structure of the LCD panels used can be visible, however. This is the so-called chicken-wire effect that can be distracting on some models, especially at larger image sizes.
Hitachis PJ-TX300 LCD projector

CRT projectors

These big, heavy projectors use the familiar cathode ray tubes to produce red, green and blue images that converge on the
A relative newcomer to the eld, DLP projectors are extremely portable and offer the same straightforward setup as LCD. Images can be breathtaking, with the only issue being the rainbow effect Caused by the. spinning colour wheel that constructs the image, it manifests itself as bands of colour on the periphery of your vision that can be distracting.
S-video Better quality than composite, but inferior to compenet video Composite video Lowest quality analogue input Component video The best analogue input, ideal for progressive scan sources
SXRD stands for Silicon X-Tal Reective Display technology and is exclusive to Sony. Typical advantages include twice the pixel density of LCD chipsets, superior response times and impressive black levels.

What the FAQ?

What is a projectors Throw Distance Ratio? This is a measure of exactly how big a picture a projector can produce at a set distance from the screen.
If you have a small viewing room this will be an important factor, because you will want to maximise the impact of the projected images.
The DLP Action! Model One

High denition

Sonys stunning SXRD VPL-VW50
LCD and DLP projectors can be HD Ready, and the impact of watching high-denition
broadcasts on a 10-foot screen is simply amazing. These projectors measure their resolution in pixels, just
like HD Ready TVs, so be sure to check that your new projector delivers at least 720 vertical lines of resolution Z
Issue 330/ What Video & High-Denition TV / 095

WHV330.jbpro 095

20/12/07 13:06:43

 

Tags

MP460 4 8IS Peugeot 106 Filter II P4B266-E At WAR Philips 655 ICF-CD823 Sni WFT11C65EF Compact Bravo Projector RDR-HX920 CDX-CA650X WDH-928 VSX-D511 MT1055 BM 66 BO5021 PI6500E Dt 830B VP-330 Gothic 3 KDL-46W4710 Chessman PRO Yamaha PW50 DR-UN7 VTH6050F Chameleon2000 37-7851 T HR-S7600 SP-600UZ Cabrio 290 MS8-T Ademco Lynx 5 Mk2 50PQ2000 SV-236MK HM121HI-BMS Dmctz5 KNA-G510 P4BGV-MX GR-B197dvca Milestone 2 940BW Plus Korg KP1 WD-10155TP - 2003 6420FF Bass1200 III DVD VT100 MP0402H-SCC DWA-142 PRO9500 WT5160 Hino 700 DC2101 T1100 MFP LP1200DXR 26LG3050 20PT3331-78R Smart Z Marquis 2003 Kodak Z885 DLS PS6 RSA1dhpe N610V KV-24CW1 STR-GA7ES GR-L247NI Jama 101 3210 E Akm515BC PN42A450p1D 42LG10R Triton 2000 ZTB220 CX-146 UE-32C6510 Galaxy S 250-2006 UX-F15CW GUC232A Omnia I900 DJ-X10 Arcbody WFH1161F Review Mayhem Pioneer C-91 Samsung ES67 DV-W28ss-R 3000cicr 80975 32PF5331 Power F6 EL-W535 W760I 26LX2R

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101