ACCESSORIES

Bull Point / Cold Chisels - Japan

Bull Point

AB00247
Size (mm) 17 x x x x 410 Power Tool Models Makita 8035NB, HM0810, HM0821, Hitachi H41, H45SA, PH40F Makita 8035NB, HM0810, HM0821, Hitachi H41, H45SA, PH40F Makita HM1200, HM1201, Hitachi H50, H50SA Makita 8600N, Hitachi PH65A, H656A

Cold Chisel

AB00248

Size (mm) 17 x x x x 410

Power Tool Models Makita 8035NB, HM0810, HM0821, Hitachi H41, H45SA, PH40F Makita 8035NB, HM0810, HM0821, Hitachi H41, H45SA, PH40F Makita HM1200, HM1201, Hitachi H50, H50SA Makita 8600N, Hitachi PH65A, H65SA

Scaling Chisel

AB00254
Size (mm) 17 x 280 x x 320 x x 360 x x 410 x 75
Power Tool Models Makita 8035NB, HM0810, HM0821 Makita 8500NB, HM0811, Hitachi PH-45 Malota 8900S, Hitachi PH-55 Makita 8600N, Hitachi PH65A, H65SA

Diamond Tools - Japan

Diamond Hi-Bit For Concrete Newly designed one piece-shaped diamond chip eliminates cracking or flaking. For concrete, titles, brick, ceramic, ALC, FRP etc.

Dia (mm) 125

Body Length (mm) 163

Depth of Cut (mm) 145

Diamond Hi-Bit

Vari Bits - USA

Vari Bit Double-uted VARI-BIT is made of high speed steel with a steam oxide surface treament.Because of its high heat and wear resistance, it cuts much faster and lasts much longer than ordinary step drills. Drills various types of material including stainless steel, metal, wood, plastic etc.
Model No. Hole Sizes Electric drill chuck size
AE00845 AE00846 AE00847 AE00848 AE00849 AE00850
4, 5, 6, 7, 8, 9, 10, 11, 12mm 5, 7.5, 10, 12.5, 15.2, 18.6, 20.4, 22.5, 25.5, 28.3mm 6, 8, 10, 12, 14, 16, 18mm 14, 16, 18, 20, 22, 24mm 20, 22, 24, 26, 28, 30, 32, 34mm 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 3/8, 1/2 7/8 7/8,1-1/8 7/8, 1-1/8, 1-7/32, 1-1/4, 1-3/8
10mm 10mm 10mm 1/4 3/8 3/8 3/8 1/4 3/8 3/8 3/8
Cuts stainless steel sheets in less than 25 sec per hole.

AE00851 AE00852

AE00845
AE00853 AE00854 AE00855 AE00856 AE00857
Allinton Engineering & Trading Pte Ltd
Head Ofce: Block 803, King Georges Avenue #01-234 Singapore 200803. Tel: (10 lines) Fax: Branch Ofce: 21 Tuas Basin Link Singapore 638782 Tel: (10 lines) Fax: Web-site: http://www.allinton.com.sg E-mail: allinton@singnet.com.sg

Accessories

Industrial
Filter Regulator Lubricators - FRL Model AFC-200H
1/4" 2 Piece FRL 88 mm / 3.mm / 5.90 B 301

In-line Oiler

Regulator & Lubricators
1/4" Brass Regulator

Width (A)

Length (B)

BFC-200H

1/4" 2 Piece FRL 140 mm / 5.mm / 8.mm / 8.11 1/4-Midget-Lube 250 mm / 9.54
1/4" Lubricator 9 cc Capacity

BFC-300H

3/Piece FRL 140 mm / 5.51

CFC-400H

1/2" 2 Piece FRL 176 mm / 6.92

3/8-Midget-Lube

BC-300H
3/8" 3 Piece FRL 207 mm / 8.mm / 6.77
3/8" Lubricator 9 cc Capacity

1/4-Master-Lube

1/4" Lubricator 22 cc Capacity

CC-400H

1/2" 3 Piece FRL 280 mm / 11.mm / 7.67 Maximm 160 psi on all models. Auto Drains available for all models.

3/8-Master-Lube

360 Swivels 922A

1/4" Swivel

Self Storing Hose
High quality Poyurethane SelfStoring Hose. Complete with Pig Tails and Swivel Male NPT fittings at each end.

3/8" Swivel

SS-1/4X20JT - 1/4" x 20'
1/4" Swivel Fittings

1/2" Swivel

SS-1/4X25JT - 1/4" x 25'

Construction

Heavy Duty Hose Barbs 3502
1/4" Male Thread x 1/4" HB

Hose Barb Swivels 9089

3/8" NPT x 1/2" HB Swivel
Fits all Chipping Hammers or other tools with a 3/8 NPT Inlet Thread.
3/8" Male Thread x 1/2" HB
3/8" Male Thread x 3/8" HB
3/4" Male Thread x 1/2" HB
1/4" Male Thread x 1/2" HB
1/2" Male Thread x 1/2" HB
1/2" NPT x 1/2" HB Swivel
Fits all Diggers and Busters or other tools with a 1/2 NPT Inlet Thread.

Just Tools Inc.

33A Haas Road, Toronto, On. M9W 3A1 Tel: 416-748-0707 Toll Free: 1-888-748-0707 Fax: 416-748-0706 E-mail: sales@justools.com www.justools.com
7/8"-24 Thread x 1/2" HB Swivel
Fits all Chipping Hammers or other tools with a 7/8-24 Inlet Thread.

Construction Accessories

Universal Couplers UC-1/4M

1/4" Male Thread

UC-1/4F

1/4" Female Thread

UC-1/4H

1/4" Hose Barb

UC-3/8M

3/8" Male Thread

UC-3/8F

3/8" Female Thread

UC-3/8H

3/8" Hose Barb

UC-1/2M

1/2" Male Thread

UC-1/2F

1/2" Female Thread

UC-1/2H

1/2" Hose Barb

UC-3/4M

3/4" Male Thread

UC-3/4F

3/4" Female Thread

UC-3/4H

3/4" Hose Barb

UC-3WAY

3-Way Coupler

UCW-AWR-4

Replacement Washers

Bowes Couplers 51522

3/8 Hose Shank-Male End

3/8 Hose Shank-Female End

3/8 Male Thread Male End

3/8 Male Thread Female End

1/2 Hose Shank-Male End

1/2 Hose Shank-Female End

1/2 Male Thread Male End

1/2 Male Thread Female End

3/4 Hose Shank-Male End

3/4 Hose Shank-Female End

3/4 Male Thread Male End

3/4 Male Thread Female End
3/8 Female Thread Male End
3/8 Female Thread Female End

Hose Whips

WHIP-1/2
Hose Whip 1/2" Swivel
1/2 Female Thread Male End
1/2 Female Thread Female End
3/4 Female Thread Male End
3/4 Female Thread Female End

WHIP-3/8

Hose Whip 3/8" Swivel

WHIP-7/8

Hose Whip 7/8-24" Swivel
Ensure long life and trouble free running with an AirPro Hose Whip. Fits all Chippers and Rivet Busters.

Oilers

0L - Oiler
1/2" Port 3.8 oz capacity

Whip Check

1/8" Cable Two Eye

1L - Oiler

3/4" Port 6.6 oz capacity
A must for all jobsites, the AirPro whip check prevents dangerous hose whipping when hoses become accidentally separated. Fits 3/8 to 1" Hose.

2L - Oiler

3/4" Port 9.9 oz capacity
Oiler Filter Combo & Inline Filters

3L - Oiler

1" Port 18.8 oz capacity
OL-F - Oiler Filter Combo
1/2" Port 3.8 oz. Capacity

Filler Cap

Optional Manual Relief replacement cap for the 0L,1L, 2L and 3L Oilers.
Inline Filter 1/2" Thread

Heavy Duty Oilers

60-CF-M
Oiler 1-1/4" Port 1 Quart Capacity
Inline Filter 3/4" Thread

230-CF-M

Oiler 2" Port 1 Gallon Capacity Constant Feed
Super Heavy Duty Constant Feed Oiler, adjustable flow. Suitable for lubricating multiple tools. Place as close to the tools as is possible. Other sizes available.

Water Separators

3/4" Ports -150 cfm

1" Ports -190 cfm

2" Ports - 770 cfm

1.25ST

1-1/4" Ports -300 cfm
2-1/2" Ports -1170 cfm
1-1/2" Ports -425 cfm

3" Ports -1750 cfm

Wright-Austin Water Separators remove 99% of entrained solids and water over 10 microns in size.These Heavy Duty Cast Iron Separators will provide years of trouble free service. All interior components are stainless steel, and an automatic drain is standard on all models.
Air Manifolds (ASME Certified)

ASME-2834-BV

8 Station Manifold c/w Ball Valves

Air Movers

3VAMS 7.31 3VAM 7.31 8VAM 14.37 6VAM 11.25 10VAM 17
AirPro Air Movers use small volume of high velocity compressed air passing through a series of small holes creating a venturi action, causing large volumes of low pressure air to be moved. (Steam pressure may also be used as a power source). Because air movers have no moving parts they are s uited for use in venting air, dust, smoke and fumes in hazardous areas.

ASME-2834

8 Station Manifold
The AirPro Air Manifold offers a heavy duty, stackable design, rugged enough to withstand the toughest jobsite. All Air Manifolds comes with 2 NPT inlet and 3/4 NPT Outlets.

Enviro-Lube

ENVIRO-LUBE is an industrial fluid that is not just rapidly biodegradable, operator safe and made from renewable resources, but environmentally safe. Suitable for all types of pneumatic tools. Available in

Air Tool Oil

High Quality Pneumatic Tool Lubricant, for indoor or outdoor summer use. Suitable for all Rotary Vane and Percussion Pneumatic tools. Available in

Anti-Freeze Oil

Good to -450 Celsius. Suitable for all Rotary Vane and Percussion Pneumatic Tools. Available in 500ml, 1L and 4L.

500ml, 1L and 4L.

Electric Tool Steel
188 Shank - Fits Bosch - 11304, 11308, 12308, 12314, HSH10, HSH27, HSH28. Hitachi - H65, H85, H90SB. Kango - 2500
Tool# Type Point Chisel Chisel Asphalt Cutter Width of Working End (in.) Std. Std. Overall Length (in.) Approx. Weight (lbs.) 7-1/4 7-1/9
226 Shank - Fits Hitachi PH65A, H65SA, H65SB, Makita 8900N, 8900-S, HK1399, HM1300
Tool# 2269500 Type Point Chisel Chisel Chisel Asphalt Cutter Width of Working End (in.) Std. Std. 5 Overall Length (in.) 20 Approx. Weight (lbs.) -
227 Shank - Fits Kango - 900, 900X, 928, 950, 950K, 950X, 1400. Hitachi - DH50SA, DH50SA1, H55SA, H55SC
Tool# P227B42 P227B66K0500 P227B75K0300 Type Moil Point Chisel Chisel Chisel Clay Spade Asphalt Cutter Ground Rod Driver Width of Working End (in.) Std. Std. 4-1/3/4 opening Overall Length (in.) 12 Approx. Weight (lbs.) 1-1/4 1-1/5 3
229 Shank - Fits Bosch - 11202, 11203, 11204, 11205, 11206, 11207. Kango - 420S, 501S 637S, 750S, 950KS, 950S, 950XS,
978S. Hitachi - DH38YE, DH40FA, DH50SB, H45SB and all tools that use the spline shank.

Tool# P229B42K05

Type Moil Point Chisel Chisel Chisel Clay Spade
Width of Working End (in.) Std. Std. 4-1/2

Overall Length (in.) 18

Approx. Weight (lbs.) 5
239 Shank - Fits all tools with SDS MAX Shank
Tool# P239B42K0500 P239B45K0550 P239B66K0500 P239B77KType Moil Point Chisel Chisel Chisel Clay Spade Pointed Clay Spade Asphalt Cutter Ground Rod Driver SDS Max to SDS Plus Adaptor Width of Working End (in.) Std. Std. 4-1/Tapered 5 3/4 opening Overall Length (in.) 7 Approx. Weight (lbs.) 1-1/4 1-1/4-3/1 1
Floor Cleaning Tools, Shanks and Bushing Tools
Tool# Description Assembly with 5/64 (2mm) Thick Blade 5/64 (2mm) Replacement Blade Nut & Bolt Set 17 Kango Shank (227 Shank) 12 Spline Shank (229 Shank) 12 SDS Max Shank (239 Shank)

22715240

45mm Kango 1 pc Bushing Tool (227 Shank)

23920240

45mm SDS Max 1 pc Bushing Tool (239 Shank)