Pomona

General Purpose Passive Oscilloscope Probes Models 4550B, 5795A, 5800A, 5803A, 5806A, 5827A, 6049A, 6069A, 6265, 6266, SP150B
FEATURES: Pomonas latest design of Passive Oscilloscope probes feature a one piece (monolithic) design for robust probe life. Probe bandwidth ratings are specified as a system bandwidth. System bandwidth includes both probe and oscilloscope together as a system. The result is a probe frequency response that can essentially can be considered transparent. For ease of use, Readout Actuator for probe attenuation sensing and a Ground Reference switch are featured on some probe models. Full set a accessories are included with each probe. All probes meet IEC1010-2-031, 300V, CAT I
Model #: Attention: System Bandwidth (3dB) MHz.: 15/20/60 20/60 15/150 System Risetime ns 23.33/3.5 3.5 11.66 1.75 17.5/1.75 1.75 2.33 1.75 5.83 17.5/5.83 23.33/2.33 Compensation Range (pf.): 10-60 10-60 N/A 10-60 10-60 15-50 10-30 10-30 10-60 10-60 10-60 Voltage Max. (Note 2) 300 Input Res. (M ) 1/1/10 1/10 1/10 Input Cap. (pf.): 64/10.5 9.10 77/11.5 5.5 10.10.5 65/11 50/15 Readout Actuator Pin: Gnd. Ref.: X
4550B 5795A 5800A 5803A 5806A 5827A 6049A 6069A SP150B
X1/X10 X10 X1 X10 X1/X10 X100 X10 X10 X10 X1/X10 X1/X10
1.) Measurements based on 1M Ohm, 20 pf. Oscilloscope.
All dimensions are in inches. Tolerances (except noted):.xx =.02 (,51 mm),.xxx = .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA

6/9/99 SY/EH/LS

Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060
PomonaACCESS 90474 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com

Page 1 of 6

S:\Engineering \Release\DataSheets\FlukeDataSheet\d4550B-SP150B_6_01.doc
2.) Maximum probe input voltage is limited to the lesser of 300VDC (includes AC peak to 1.3MHz.) or on X1, to the driven equipments input rating. * Oscilloscope Model # 5827 has a cable length of 2.0 Meters.

Model #:

Attention:

6101A 6102A

X10 X10
System Bandwidth (3dB) MHz.: 150 250
System Risetime ns 2.33 1.4
Compensation Range (pf.): 10-30 10-30
Voltage Max. (Note 2) 300 300

Input Res. (M ) 10 10

Input Cap. (pf.): 10.5 10
Readout Actuator Pin: X X

Gnd. Ref.:

5809A 5812A
System Bandwidth (3dB) MHz.: 300 300
System Risetime ns 1.17 1.17
Compensation Range (pf.): 10-60 10-60

Input Cap. (pf.): 17 17

Readout Actuator Pin: X
1.) Measurements based on 1M Ohm, 20 pf. Oscilloscope. 2.) Maximum probe input voltage is limited to the lesser of 300VDC (includes AC peak to 1.3MHz.) or on X1, to the driven equipments input rating.

Page 2 of 6

Low Frequency Trimmer Adjustment: (Model 5800A is not adjustable) Low frequency response can be matched to the oscilloscope by adjusting the compensation trimmer on the head of the probe. 1.) Connect the probe to the oscilloscope and to a 1 KHz. Square wave source, the rise time should not exceed 10 microseconds (most oscilloscopes provide a probe compensation output). For X1/X10 probes, switch to the X10 position. 2.) Set the oscilloscope to display two to three cycles and two to six vertical divisions. 3.) Carefully adjust the trimmer tool to obtain the flattest tops to the square waves displayed on the oscilloscope, see illustrations.
High Frequency Trimmer Adjustment: (Models 5809A and 5812A only) The high frequency compensation has been preadjusted at the factory, however if adjustment is required, use the following procedure. 1.) Remove the compensation box cover located near the connector. Using the BNC adapter, connect the probe to a square wave generator operating between 10 to 100 KHz terminated into 50 ohms. The square wave generator rise time should be approximately.125 ns. Adjust each control until the leading edge of the waveform is as flat, square and horizontal as possible (see high frequency illustrations). 2.) Readjust the low frequency compensation if necessary.

Page 3 of 6

Replacement Accessory Kit Part Number: 6267
Pomona Oscilloscope to Probe Cross Reference:
Manf. B&K B&K B&K B&K B&K B&K B&K B&K Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Model Series 1422, 1443 2120, 2125, 2522 5020, 5024, 5034 5100, 1541B 90, 105 Series PM3050, PM3052 PM3055, PM3057 PM3065, PM3067 PM3070, PM3072 PM3092, PM33094 PM3208, PM3209 PM3335, PM3337 PM3350A, PM3352A PM3355, PM3357 PM3365A, PM3367A PM3375, PM3377 PM3382, PM3384 x1 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A x10 x1/x10 x6266 5827A 5827A 5795A 4550B 5827A 5827A 5827A 5795A 4550B 5827A 6049A SP150B 5827A 5827A 6006* & 6033 6035* 5827A 5827A 5795A 4550B 5827A 5795A 4550B 5827A 5803A 5806A 5827A 5827A 5827A 5827A 5827A 5795A 4550B 5827A 5795A 4550B 5827A 5795A 4550B 5827A

Page 4 of 6

PM3392, PM3394 V-1060, V-1065A V-1100A V-1150 V-209, V-212 V-222, V-223, V-225 V-422 V-509, V-522 V-523, V-525 V-6155 V-660, V-665A VC-5025 VC-5410, VC-5430 VC-5460 VC-6023, VC-6024 VC-6025A VC-6045, VC-6045A VC-6155 VC-7102, VC-7104 54600B, 54601B 54602B 54603B 54645A, 54645D SS-7811, SS-7821 COR5500U, COR5501U COR5502U COR5520U, COR5521U COR5540U, COR5541U COR5560U, COR5561U 2250 8020, 8060, 8063 8060, 8063 8100, 8101, 8103, 8104 3060D 3100A 313A, 315A, 323A, 325A LBO-5825 9304A,9340AM 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5803A 5795A 5795A 6049A 6265 5795A 6265 6049A 5795A 5795A 6049A 5795A 6049A 6265 5795A 5795A 5795A 5795A 6265 5795A 6265 6069A 5795A 6265 5795A 5803A 5806A 4550B 4550B SP150B 6266 4550B 6266 SP150B 4550B 4550B SP150B 4550B SP150B 6266 4550B 4550B 4550B 4550B 6266 4550B 6266 4550B 6266 4550B 5806A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A
Fluke Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi H-P H-P H-P H-P Iwatsu Kikusui Kikusui Kikusui Kikusui Kikusui Leader Leader Leader Leader Leader Leader Leader Leader Leader Leader LeCroy

Page 5 of 6

2201, 2205 2211, 2214 2212, 2224 2221A, 2235A, 2236A 2245A, 2246A, 2247A 2430A/M, 2445B 2445A TAS220, TAS250 TAS465, TAS475 TAS485 TDS210 TDS220 TDS310 TDS320, TDS350 TDS410, TDS420 TDS410A, TDS420A DL1540, DL4100 DL4200 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 6101A 6101A 6101A 6101A 6101A 6265 6101A 6102A 6101A 6102A 6101A 6102A 6049A 5809A 6266 4550B 4550B SP150B 4550B 6266 4550B 5806A 6266 4550B 6266 5806A SP150B 5806A SP150B 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A

Pomona
General Purpose Passive Oscilloscope Probes
Pomonas latest design of Passive Oscilloscope probes feature a one piece (monolithic) design for robust probe life. Probe bandwidth ratings are specified as a system bandwidth. System bandwidth includes both probe and oscilloscope together as a system. The result is a probe frequency response that can essentially be considered transparent. For ease of use, Readout Actuator for probe attenuation sensing and a Ground Reference switch are featured on some probe models. Full set of accessories are included with each probe.

Model #:

Attention:
4550B 5795A 5800A 5803A 5806A 5827A 6049A 6069A SP150B
X1/X10 X10 X1 X10 X1/X10 X100 X10 X10 X10 X1/X10 X1/X10
System Bandwidth (3dB) MHz. (Note 1): 15/20/60 20/60 15/150
System Risetime ns Compensation Range (pf.):
Voltage Max. (Note 2) 600 Input Res. (M ) Input Cap. (pf.): Readout Actuator Pin:

co m st

Gnd. Ref.: 23.33/3.5 3.5 11.66 1.75 17.5/1.75 1.75 2.33 1.4 5.83 17.5/5.83 23.33/2.33 NA/N/A 1060 NA/1060 NA/1060 NA/1060 1/1/10 1/10 1/10 64/10.5 9.10 77/11.5 5.5 10.10.5 65/11 50/15
1.) Measurements based on 1M Ohm, 20 pf. Oscilloscope. 2.) Maximum probe input voltage (VDC + Peak AC), derated with frequency. 3.) Oscilloscope probe cable length:1,2 meters (47), Model 5827 cable length 2.0 meters (79).

Made in USA

D4550B
PomonaACCESS 90474 Fax: 909-629-3317 or (714) 253-3858 Sales: 909-469-2900 (800) 444-6785
Technical Assistance: 800-241-2060

4-2-98 JS

More drawings available at www.ittpomona.com

6101A 6102A

X10 X10

2.33 1.4

Voltage Max. (Note 2) 10 10
System Bandwidth (3dB) MHz.: (Note 1) 150 250

System Risetime ns

Compensation Range (pf.):

Voltage Max. (Note 2)

Input Res. (M )

Input Cap. (pf.):

Readout Actuator Pin: X X

Gnd. Ref.:

1030 1030

10.5 10

System Bandwidth (3dB) MHz. (Note 1): System Risetime ns 1.17 1.17 Compensation Range (pf.):
1. Measurements based on 1M Ohm, 20 pf. Oscilloscope. 2. Maximum probe input voltage (VDC + Peak AC), derated with frequency. 3. Oscilloscope probe cable length:1,2 meters (47).

Readout Actuator Pin:

5809A 5812A

1060 1060

High Frequency Trimmer Adjustment: (Models 5809A and 5812A only)
The high frequency compensation has been preadjusted at the factory, however if adjustment is required, use the following procedure. 1.) Remove the compensation box cover located near the connector. Using the BNC adapter, connect the probe to a square wave generator operating between 10 to 100 KHz terminated into 50 ohms. The square wave generator rise time should be approximately.125 ns. Adjust each control until the leading edge of the waveform is as flat, square and horizontal as possible (see high frequency illustrations). 2.) Readjust the low frequency compensation if necessary.
Low Frequency Trimmer Adjustment: (Model 5800A is not adjustable) Low frequency response can be matched to the oscilloscope by adjusting the compensation trimmer on the head of the probe. 1.) Connect the probe to the oscilloscope and to a 1 KHz. Square wave source, the rise time should not exceed 10 microseconds (most oscilloscopes provide a probe compensation output). For X1/X10 probes, switch to the X10 position. 2.) Set the oscilloscope to display two to three cycles and two to six vertical divisions. 3.) Carefully adjust the trimmer tool to obtain the flattest tops to the square waves displayed on the oscilloscope, see illustrations.

Replacement Accessory Kit Part Number: 6267 (Accessories are also included with each probe)
Pomona Oscilloscope to Probe Cross Reference:
Manf. B&K B&K B&K B&K B&K B&K B&K B&K Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Fluke Model Series 1422, 1443 2120, 2125, 2522 5020, 5024, 5034 5100, 1541B 90, 105 Series PM3050, PM3052 PM3055, PM3057 PM3065, PM3067 PM3070, PM3072 PM3092, PM33094 PM3208, PM3209 PM3335, PM3337 PM3350A, PM3352A PM3355, PM3357 PM3365A, PM3367A PM3375, PM3377 PM3382, PM3384 x1 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A x10 x1/x10 x6266 5827A 5827A 5795A 4550B 5827A 5827A 5827A 5795A 4550B 5827A 6049A SP150B 5827A 5827A 6006* & 6033 6035* 5827A 5827A 5795A 4550B 5827A 5795A 4550B 5827A 5803A 5806A 5827A 5827A 5827A 5827A 5827A 5795A 4550B 5827A 5795A 4550B 5827A 5795A 4550B 5827A
Fluke Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi Hitachi H-P H-P H-P H-P Iwatsu Kikusui Kikusui Kikusui Kikusui Kikusui Leader Leader Leader Leader Leader Leader Leader Leader Leader Leader LeCroy Tektronix Tektronix Tektronix Tektronix Tektronix PM3392, PM3394 V-1060, V-1065A V-1100A V-1150 V-209, V-212 V-222, V-223, V-225 V-422 V-509, V-522 V-523, V-525 V-6155 V-660, V-665A VC-5025 VC-5410, VC-5430 VC-5460 VC-6023, VC-6024 VC-6025A VC-6045, VC-6045A VC-6155 VC-7102, VC-7104 54600B, 54601B 54602B 54603B 54645A, 54645D SS-7811, SS-7821 COR5500U, COR5501U COR5502U COR5520U, COR5521U COR5540U, COR5541U COR5560U, COR5561U 2250 8020, 8060, 8063 8060, 8063 8100, 8101, 8103, 8104 3060D 3100A 313A, 315A, 323A, 325A LBO-5825 9304A,9340AM 2201, 2205 2211, 2214 2212, 2224 2221A, 2235A, 2236A 2245A, 2246A, 2247A
5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5800A 5803A 5795A 5795A 6049A 6265 5795A 6265 6049A 5795A 5795A 6049A 5795A 6049A 6265 5795A 5795A 5795A 5795A 6265 5795A 6265 6069A 5795A 6265 5795A 5803A 6101A 6101A 6101A 5806A 4550B 4550B SP150B 6266 4550B 6266 SP150B 4550B 4550B SP150B 4550B SP150B 6266 4550B 4550B 4550B 4550B 6266 4550B 6266 4550B 6266 4550B 5806A 6266 4550B 4550B 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A 5827A