GPSport 260 Quick Guide

1. Unit Overview 3. Initial Setup Users will be prompted with the Initial Setup for the first use of GPSport 260. Use the 5-direction button to select your preference for language, unit, time format/zone, auto flip page, weight, and sport type. If the GPSport 260 is reset, the Initial Setup will automatically start when users turn on the device.

1.8 LCD screen

Backlight Menu Exit

Power/ Stop/Pause

OK/ Up/ Down/ Right/ Left button Buttons Name Power button Icon
Speed Meter Abbreviation List ALT = Altitude AVG = Average speed BAR = Barometer CAL = Calorie DST = Distance KM = Kilometer KMH = Kilometer per hour MAX = Max speed MPH = Mile per hour ODA = Odometer A ODB = Odometer B SPD = Speed TIM = Time TOD CAL = Todays Calorie VAR = Variation
4. Basic Operation/ Sport Mode Once the device is turned on, the main menu appears. Select Sport Mode and the default first page for Sport Mode appears Speed Meter. You are now on the Sport Page and are ready to use the basic function of this device.
Function Press to pause/ resume log when the device is turned on. Press for 3 seconds to turn on/off the unit. Main Menu Sport Mode Sport Page Press the 5-direction button left or right to switch among pages with different sport information as shown in the following. The Speed Meter page can be defined by user with preferred Top or Bottom sport information. For detail, please refer to the user manual saved in the Tool CD that came with this device. 5. Starting/Stopping Logging Auto-Start Logging The GPSport 260 is set to automatically log your track once it is turned on. To stop/ pause logging during activity, just press the Power button. The play icon will be replaced by pause icon
Backlight Menu Exit 5-Direction OK
Press for 3 seconds to turn on/off the backlight. Return to main menu Use Left, Up, Right, and Down to select an option. Press the OK button to confirm input.
2. Installing Bike Mount (1) Attach the bracket to the bracket holder. (2) Thread the two cable ties through the slots of the bracket holder. (3) Place the rubber pad under the bike mount and attach the bike mount securely to the bike stem using the two cable ties. (4) Slide in the GPS on top of the bike mount until it snaps into place
as illustrated. Please note that the stop/pause is only functional in Sport Mode. If you are in the Follow Course mode, the stop/pause function is disabled. NOTES 1. Barometer calibration is set to automatically perform by default. Users can perform the barometer calibration manually. Please refer to the section titled Barometer Calibration in the user manual for details on setting. 2. When a warning icon appears on the status bar , it means the 3D
compass needs calibration. Go to 3D compass mode to perform calibration. 3. Do not charge the device at high temperature otherwise the charging may not be performed or the lithium battery cannot be fully charged.
GPSport 260 Schnellanleitung
1. Gerteberblick 3. Initialisieren Nutzer werden gebeten, das GPSport 260 zu initialisieren, wenn Sie es das erste Mal nutzen. Verwenden Sie den 5-Wege Taster um Ihre bevorzugte Sprache, Einheit, Zeitformat/-zone, Automatisches Umblttern, Gewicht und Sportart einzustellen.Wenn das GPSport 260 zurckgestellt wird, beginnt die Initialisierung automatisch sofern das Gert eingeschaltet wird.
Abkrzungen des Geschwindigkeitsmessers ALT = Hhe AVG = Durchschnitt BAR = Hhenmesser CAL = Kalorie KM = Kilometer KMH = Kilometer pro Stunde MAX = Max Geschwindigkeit MPH = Meilen pro Stunde ODA = Entfernungsmesser A ODB = Entfernungsmesser B SPD = Geschwindigkeit TIM = Zeit TOD CAL = Kalorien heute VAR = Abweichung

1.8 LCD Bildschirm

Hintergrundbeleuchtung Men Ausgang

Power/ Stopp/Pause

4. Basisnutzung / Sport Modus Sobald das Gert eingeschaltet ist, erscheint das Hauptmen. Whlen Sie den Sportmodus und die voreingestellte erste Seite erscheint mit dem Geschwindigkeitsmesser. Sie sind jetzt auf der Sportseite und knnen die Basisfunktionen des Gertes nutzen.