Operating instructions

DISHWASHER EN

English,1

Franais, 13

Deutsch, 25

Contents

Installation, 2-3

Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data

Portugus, 61

Nederland, 37 Espaol, 49
Description of the appliance, 4
Overall view Control panel

Polski, 73

Loading the racks, 5
Lower rack Cutlery basket Upper rack

Start-up and use, 6-7

LDF 12314
Starting the dishwasher Measuring out the detergent Wash options

Wash cycles, 8

Table of wash cycles
Rinse aid and refined salt, 9
Measuring out the rinse aid Measuring out the refined salt

Care and maintenance, 10

Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods
Precautions, advice and Assistance,11
General safety Disposal Saving energy and respecting the environment Assistance

Troubleshooting, 12

Installation
Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance. If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.
Connecting the water inlet hose
To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a gas threaded connection. To a suitable hot water connection point: your dishwasher may be supplied with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60C. Screw the hose to the tap as described for connection to a cold water supply. If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance). The water pressure must be within the values indicated in the Technical data table (see adjacent information). The hose should not be bent or compressed.
Positioning and levelling
1. Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed any further with the installation process. 2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction sheet). 3. Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position. If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating. 4.* Adjust the height of the rear foot from the front of the appliance* on the central lower part of the dishwasher, turning a hexagonal spanner (red color) with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height.

Anti-flooding protection

To ensure floods do not occur, the dishwasher: - is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance. Some models are also equipped with the supplementary safety device New Acqua Stop*, which guarantees antiflooding protection even in the event of a supply hose rupture.
Connecting the water and electricity supplies
Connection to the water and electricity supplies should only be performed by a qualified technician. The dishwasher should not stand on top of the water hoses or the electricity supply cable. The appliance must be connected to the water supply network using new hoses. Do not use old hoses. The water inlet (A) and outlet (B) hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation (see figure).
WARNING: HAZARDOUS VOLTAGE!
Under no circumstance should the water inlet hose be cut as it contains live electrical parts.
* Only available in selected models.
Connecting the water outlet hose

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 4 cm. Alternatively, rest it over a sink or tub; the free end of the hose should not remain immersed in water. The special plastic elbow* makes it easier to find the best layout: fix the elbow to the wall securely in order to prevent the outlet hose from moving and spilling the dirty water. The part of the hose marked with the letter A should be between 40 and 100 cm above the ground (see

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form.
After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add only then approximately 1 kg of salt (see chapter entitled Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. Select the water hardness value (see chapter entitled Rinse aid and refined salt). - After the salt has been poured into the machine, the LOW SALT indicator light* switches off. If the salt container is not filled, the water softener and the heating element may be damaged as a result.
Advice regarding the first wash cycle
figure). We advise against the use of hose extensions.

Electrical connection

Before inserting the plug into the electrical socket, make sure that: The socket is earthed and complies with current regulations. The socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see chapter entitled Description of the appliance). The power supply voltage falls within the values indicated on the data plate on the inside of the door. The socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance); do not use extension cables or multiple sockets. Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible. The cable should not be bent or compressed. If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See Assistance) The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

Technical data

Dimensions Capacity Water supply pressure Power supply voltage width 60 cm height 85 cm depth 60 cm 14 standard place-settings 0,05 1MPa (0.bar) 7,psi See appliance data plate
Total absorbed See appliance data plate power Fuse See appliance data plate This dishwasher conforms to the following European Community Directives: -2006/95/CE dated 16/01/2007 (Low Voltage) and subsequent modifications -89/336/EEC dated 03/05/89 (Electromagnetic Compatibility) and subsequent modifications -97/17/EC (Labelling) -2002/96/ CE Waste Electrical and Electronic Equipment (WEEE)
Description of the appliance

Overall view

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Upper rack Upper sprayer arm Tip-up compartments Rack height adjuster Lower rack Lower sprayer arm Cutlery basket Washing filter Salt dispenser Detergent and rinse aid dispensers Data plate Control Panel ***

Control panel

ShorTime option indicator light* Low salt indicator light * Multi-functional tablets indicator light* Select wash cycle button Good Night option indicator light * Extra Dry indicator light* Half load upper and lower rack indicator lights * Time remaining light-up display Start/Pause button and indicator light

ON/OFF indicator light

Wash cycle name indicator light

ON/OFF/Reset button

Low rinse aid indicator light*
Multi-functional tablets button * Option button ShorTime * Good Night option button *
Delayed start indicator light* Delayed start button * Half load button* Extra Dry button *
The number and type of wash cycles and options may vary depending on the dishwasher model.
***Only in completely built-in models. * Only available in selected models.

Loading the racks

Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and cups. After loading the appliance, check that the sprayer arms can rotate freely.

Tilt A

Tilt B

Tilt C

Lower rack
The lower rack can hold pans, lids, plates, salad bowls, cutlery, etc. as seen in the Loading examples. Plates and large covers should be placed at the sides of the rack, ensuring that they do not block the rotation of the upper sprayer arm. Some dishwasher models are fitted with tip-up sections*, which can be used in a vertical position when arranging plates or in a horizontal position when arranging pans and salad bowls. The type of cutlery basket may vary according to the dishwasher model: it may be modular, non-modular or a sliding version. The non-modular basket must only be positioned at the front of the lower rack. The modular basket may be separated into two parts, a solution which is recommended when performing a half load wash (only in models offering this option), is available in a sliding version (positioned at any point on the lower rack by sliding it between the fixed or tip-up inserts. - Both versions are fitted with a collapsible sliding system which means the cutlery can be arranged in the best possible way. Knives and other utensils with sharp edges must be placed in the cutlery basket with the points facing downwards, or they must be positioned horizontally in the tip-up compartments on the upper rack.
- Lift the tip-up compartment, slide it gently and position it in the desired tilt angle.
Adjusting the height of the upper rack
In order to make it easier to arrange the crockery, the upper rack may be moved to a higher or lower level. (in models which offer the Baby cycle, the upper rack must be placed in its lower position when the appliance is being loaded). The height of the upper rack should ideally be adjusted WHEN THE RACK IS EMPTY. Never lift or lower the rack on one side only. Open the left and right guide rail stops and pull out the rack; position it higher or lower as required, slide it along the guide rails until the front wheels are in place and close the stops (see figure). If the rack is fitted with Dual Space handles* (see figure), pull out the upper rack until it reaches its stop point, grip the handles at the sides of the rack and move it upwards or downwards, then slowly let it fall back into place.

Cutlery basket

Loading examples for the upper/lower rack
Cutlery basket positioning examples Baby Tip-up compartments*
For dishwasher models with a Baby Cycle, tip-up compartments suitable for washing bottles, rings and teats are provided. (see the instruction sheet)
Load this rack with delicate and lightweight crockery: glasses, tea and coffee cups, saucers, small salad bowls, saucepans and small saucepans which are not too soiled, using the Loading examples as a guide. Mugs and cups, long sharp knives and serving utensils: place these on the tip-up compartments**.

The ShorTime and Good Night options are not compatible with each other. The ShorTime and Good Night options are not compatible with the HALF LOAD option.
Half load using the upper or lower rack
If there are not many dishes to be washed, a half load cycle may be used in order to save water, electricity and detergent. Select the wash cycle and press the HALF LOAD button repeatedly: the triangle corresponding to the selected load will illuminate and the wash cycle will take place only using the upper or lower rack. If the button is pressed again, the option will be deselected. The Half Load option is not compatible with the Good Night and ShorTime options. Remember to load the upper or lower rack only, and to reduce the amount of detergent accordingly.
Multi-functional tablets*
This option optimises washing and drying results. When using multi-functional tablets, press the MULTIFUNCTIONAL TABLETS button; the corresponding indicator light will illuminate. If the button is pressed again the option will be deselected. The Multi-functional tablets option results in the lengthening of the wash cycle. The MULTI-FUNCTIONAL TABLETS option remains set for subsequent wash cycles if it is not deselected.
It is better to use powder detergent in this case. This option is incompatible with the following wash cycle: Speed wash.
The use of tablets is only recommended when the MULTI-FUNCTIONAL TABLETS option is available.
This option is not recommended for use with wash cycles which do not specify the use of multi-functional tablets (see Table of options).

Delayed start

It is possible to delay the start time of the cycle for a period of time between 1 and 24 hours. 1. After selecting the desired wash cycle and any other options, press the DELAYED START button. The Delayed Start symbol will begin to flash. Use the same button to select the time at which you wish the wash cycle to begin (after a period of 1 to 24 hours).

Extra drying

To improve the dryness level of the crockery, press the EXTRA DRYING button; the indicator light will illuminate. If it is pressed again the option will be deselected. The EXTRA DRYING option increases the duration of the wash cycle.
2. Confirm the selection using the STAR/PAUSE button; the symbol will stop flashing and the countdown will begin. The text Start in will be displayed, the selected delay time will flash and the START/PAUSE button will remain lit in a fixed manner. 3. When the set time has elapsed, a long beep sounds, the DELAYED START indicator light switches off and the wash cycle begins.

To deselect the DLEAYED START option, press the DELAYED START button repeatedly until the text OF. appears. The Delayed Start function cannot be set once a wash cycle has been started.

SELFCARE WASH CYCLE

This disinfecting wash cycle deep cleans the inside of the dishwasher, thereby reducing the formation of bad odours.

WARNING

The SELFCARE wash cycle should be performed as part of your dishwasher maintenance routine, using special singledose products (follow the instructions on the packaging) while the dishwasher is EMPTY.

Table of options

Auto Super wash Normal Daily A 60 Soaking Eco 50C Speed 25 Crystals Auto Duo Wash Ultra Intensive Special Guest Baby Cycle Self Care
A Delayed Start Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
B Half Load Yes Yes Yes Yes Yes No Yes No Yes Yes No No
C Tabs Yes Yes Yes No Yes Yes Yes Yes Yes No No No
D Extra Dry Yes Yes No No Yes NO Yes Yes Yes Yes No No
E Shor Time Yes Yes No No No No No Yes No No No No
F Good Night No Yes No No Yes No No No No No No No

ShorTime* option

This option can be used to reduce the duration of the main wash cycles while maintaining the same washing and drying performance levels. After selecting the wash cycle, press the ShorTime option button; the illumination of the corresponding indicator light followed by a short beep indicates its selection. To deselect the option, press the same button again.

Good Night option*

This option reduces the amount of noise made by the machine and lengthens the wash cycles. It is a useful option because it enables users to benefit from the night-time energy rate. After selecting the wash cycle, press the Good Night option button; the illumination of the corresponding indicator light followed by a short beep indicates its selection. To deselect the option, press the same button again.

Wash cycles

For available OPTIONS please refer to the Table of options on the Start-up and use page. The number and type of wash cycles and options may vary depending on the dishwasher model.
Detergent (A) = compartment A (B) = compartment B Powder Heavily soiled dishes and pans (not to be used for delicate items). Liquid Tablets Wash cycles which include drying Wash cycle duration (tolerance 10%) Hrs. Min.
Wash cycle selection instructions

Wash cycle

Options

Auto Super Wash

35 g (A)

35 ml (A)

A-B-C-DE A-B-C-DE-F
Normally soiled pans and dishes. Standard daily wash cycle. Limited quantity of daily soiling. (4 place settings + 1 saucepan +1 frying pan). Pre-wash for dishes while awaiting completion of the load with the dishes from the next meal. Environmentally-friendly wash cycle with low energy consumption levels, suitable for pans and dishes. Economic and fast wash to be used for lightly soiled dishes. (Run cycle immediately after use) (2 plates + 2 glasses + 4 pieces of cutlery + 1 saucepan + 1 small frying pan). Economic and fast wash for delicate items which are sensitive to high temperatures. (Run cycle immediately after use) (glasses, upper rack + delicate plates, lower rack ). Wash spread over the two racks: delicate for crystal and glasses on the upper rack and heavy duty for the pans on the lower rack.

Normal

29 g (A) 6 g (B)

29 ml (A) 6 ml (B)

Daily A 60

25 g (A)

25 ml (A)

Soaking

Eco* 50 C

AB-C-DF

Speed 25

Crystals

Auto Duo Wash
Heavily soiled saucepans or pans with residual dried-on food.

Ultra Intensive

1 (A) 1 (bottom of the appliance)
Rinse and drying cycle for dishes that are seldom used and are only dusty. Disinfecting wash cycle suitable for washing bottles, rings and teats together with plates, cups, glasses and cutlery. The crockery should only be loaded on the upper rack. Disinfecting cycle for cleaning the inside of the dishwasher, to be carried out only when the dishwasher is EMPTY using specific detergents designed for dishwasher maintenance.

Special Guest

Baby Cycle

20 g (A)

20 ml (A)

SelfCare

Notes: Optimum performance levels when using the "Daily A 60 and "Speed 25 cycles can be achieved by observing the maximum amounts of crockery specified. To make it easier to measure out the detergent, it is worth remembering that: 1 tablespoon = 15 grams of powder = approximately 15 ml of liquid - 1 teaspoon = 5 grams of powder = approximately 5 ml of liquid
* The Eco wash cycle adheres to the regulation EN-50242. Although it has a longer duration than other wash cycles it uses less energy and is les harmful to the environment. Note for Test Laboratories: for information relating to comparative EN testing conditions, please send an email to the following address: ASSISTENZA_EN_LVS@indesitcompany.com
Rinse aid and refined salt
Only use products which have been specifically designed for dishwashers. Do not use table salt or industrial salt, or washing up liquid. Follow the instructions given on the packaging.
If using a multi-functional product it is not necessary to add rinse aid; however, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. Follow the instructions given on the packaging. - Press the DELAYED START button (levels 1 to 5) or the HALF LOAD button (levels 5 to 1) repeatedly, until the desired hardness level has been reached (1-2-3-4-5*, see hardness table). You will be able to scroll through a maximum of 5 levels. Press the P button to confirm. - To exit the function, wait approximately 30 seconds or press another option button, or switch off the machine using the ON/OFF button. Even if using multi-functional tablets, the salt dispenser should still be filled.

Water Hardness Table

dH fH mmol/l 1.2.3.6.level 5*
If you do not add salt or rinse aid, the LOW SALT* and LOW RINSE AID* indicator lights remain lit.
Measuring out the rinse aid
Rinse aid makes it easier for the crockery to dry, as water runs off surfaces more readily and therefore does not leave streaks or marks. The rinse aid dispenser should be filled: When the LOW RINSE AID* indicator light on the control panel is illuminated; 1. Open the dispenser by turning the lid (G) in an anticlockwise direction. 2. Pour in the rinse aid, making sure it does not overflow from the dispenser. If this happens, clean the spill immediately with a dry cloth. F 3. Screw the lid back on. NEVER pour the rinse aid directly G into the appliance tub.
For values between 0f and 10f, we do not recommend the use of salt. * this setting may cause a slight increase in the duration of the cycle.
(dH = hardness measured in German degrees - f = hardness measured in French degrees - mmol/l = millimoles per litre)
Adjusting the amount of rinse aid
If you are not completely satisfied with the drying results, you may adjust the quantity of rinse aid used. Use a screwdriver to turn the dosage adjuster (F) to one of the 6 pre-set positions (the default position is set to 4): If there are streaks on the crockery, set the adjustment device to a lower number (1-3). If drops of water remain on the crockery or if there are limescale marks present after the cycle has finished, set the adjuster to a higher number (4-6).
Setting the water hardness
Every dishwasher is equipped with a water softener which, by using refined salt designed especially for this type of appliance, supplies water without limescale which is then used to wash the crockery. This dishwasher offers a setting which helps to reduce pollution and optimises washing performance in accordance with the water hardness level in your area. This information can be obtained from the organisation which supplies your household with water. - Switch on the appliance by pressing the ON/OFF button. - Press the P button and hold for a few seconds; two short beeps will sound, The text "WATER HARDNESS" will appear on the display and the set hardness number will also flash slowly on the display (the water softening system is set by default to number 3).
In order to achieve the best possible results using a wash cycle, make sure that the dispenser is never empty. Refined salt removes limescale from the water, thus avoiding the formation of deposits on crockery. The salt dispenser is located in the lower part of the dishwasher (see Description) and should be filled: When the green float* cannot be seen by simply looking at the cap of the salt dispenser. When the LOW SALT* indicator light on the control panel is illuminated; 1. Remove the lower rack and unscrew the container cap (anticlockwise). 2. The first time you do this: fill the water tank right up to its edge. 3. Position the funnel* (see figure) and fill the salt container right up to its edge (this should hold approximately 1 kg); it is not unusual for a little water to leak out. 4. Remove the funnel* and wipe any salt residue away from the opening; rinse the cap under running water and then screw it on, the head facing downwards so as to let the water flow out of the four cracks which are arranged in a star shape on the lower part of the cap. (the container cap with the green float*) It is advisable to perform this procedure every time you add salt to the container. Make sure the cap is screwed on tightly, so that no detergent can get into the container during the wash cycle (this could damage the water softener beyond repair). When necessary, measure out the salt before a wash cycle so that any saline solution which has leaked out of the salt dispenser is removed.

After cleaning the filters, replace the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher.
Leaving the machine unused for extended periods
If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.
Cleaning the water inlet filter*
Disconnect the appliance from the electricity supply and shut off the water tap. Leave the door of the appliance ajar.
When you return, run a wash cycle when the dishwasher is empty.
Precautions, advice and Assistance
This appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety reasons and should therefore be read carefully. If your electricity supply contract gives details of electricity saving time bands, run wash cycles during the periods when a lower tariff is applied. The Delayed start* button (see Start-up and use) helps you organise the wash cycles accordingly.

General safety

The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use. The appliance must be used by adults only, to wash domestic crockery in accordance with the instructions in this manual. The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the machine exposed to rain and storms. Do not touch the appliance when barefoot. When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable. The water supply tap must be shut off and the plug should be removed from the electrical socket before cleaning the appliance or carrying out any maintenance work. If the appliance breaks down, do not under any circumstances touch the internal parts in an attempt to perform the repair work yourself. Never touch the heating element. Do not lean or sit on the open door of the appliance: this may cause the appliance to overturn. The door should not be left open as it may create a dangerous obstacle. Keep detergent and rinse aid out of reach of children. The packaging material should not be used as a toy.

Phosphate-free and chlorine-free detergents containing enzymes
We strongly recommend that you use detergents that do not contain phosphates or chlorine, as these products are harmful to the environment. Enzymes provide a particularly effective action at temperatures around 50C, and as a result detergents containing enzymes can be used in conjunction with lowtemperature wash cycles in order to achieve the same results as a normal 65C wash cycle. To avoid wasting detergent, use the product in appropriate quantities based on the manufacturers recommendations, the hardness of the water and the soil level and quantity of crockery to be washed. Even if they are biodegradable, detergents contain substances which may alter the balance of nature.

Assistance

Before contacting Assistance:
Check whether the problem can be resolved using the Troubleshooting guide (see Troubleshooting). Restart the programme to check whether the problem has ceased to exist. If the problem persists, contact the Authorised Technical Assistance Service. Never use the services of unauthorised technicians.

Disposal

Disposal of packaging materials: observe local legislation so that the packaging may be reused. The European Directive 2002/96/EC relating to Waste Electrical and Electronic Equipment (WEEE) states that household appliances should not be disposed of using the normal solid urban waste cycle. Exhausted appliances should be collected separately in order to optimise the cost of re-using and recycling the materials inside the machine, while preventing potential damage to the atmosphere and to public health. The crossed-out dustbin is marked on all products to remind the owner of their obligations regarding separated waste collection. For further information relating to the correct disposal of household appliances, owners may contact the relevant public authority or the local appliance dealer.
Please have the following information to hand:
Saving energy and respecting the environment

Saving water and energy

Only begin a wash cycle when the dishwasher is full. While waiting for the dishwasher to be filled, prevent unpleasant odours using the Soak cycle (see Wash cycles). Select a wash cycle which is suited to the type of crockery and to the soil level of the crockery using the Table of wash cycles: - For dishes with a normal soil level, use the Eco wash cycle, which guarantees low energy and water consumption levels. - If the load is smaller than usual activate the Half load option* (see Start-up and use).

The type of malfunction. The appliance model (Mod.). The serial number (S/N). This information can be found on the appliance data plate (see Description of the appliance).

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance.

Malfunction:

The dishwasher does not start.
Possible causes / Solutions:
The p l u g h a s n o t b e e n i n s e rt e d i n t o t h e e l e c t ri c a l s o c k e t p ro p e rl y, o r t h e re i s n o p o w e r i n t h e h o u s e. The d i s h wa s h e r d o o r h a s n o t b e e n s h u t p r o p e rl y. A d e l a y e d s t a rt h a s b e e n p ro g ra m m e d (s e e S t a rt -u p a n d u s e ).
N o w a te r d r a i n s o u t f r o m th e dishwasher.
The d i s h wa s h e r c y c l e h a s n o t y e t f i n i s h e d. The wa t e r o u t l e t h o s e i s b e n t (s e e I n s t a l l a t i o n ). The d ra i n d u c t i s b l o c k e d. The f i lt e r i s c l o g g e d u p wi t h f o o d re s i d u e s.
Th e d i s h w a s h e r m a k e s excessive noise.
The d i s h e s a re ra t t l i n g a g a i n s t e a c h o t h e r o r a g a i n s t t h e s p ra y e r a rm s. A n e xc e s s i v e a m o u n t o f f o a m h a s b e e n p ro d u c e d : t h e d e t e rg e n t h a s n o t b e e n m e a s u re d o u t c o rr e c t l y o r i t i s n o t s u i t a b l e f o r u s e i n d i s h wa s h e rs (s e e S t a rt -u p a n d u s e ).
Th e d i s h e s a n d g l a s s e s a r e c o v e r e d i n a w h i te fi l m o r l i m e s c a l e d e p o s i ts.
The l e v e l o f t h e re f i n e d s a l t i s l o w o r t h e d o s a g e s e t t i n g i s n o t s u i t e d t o t h e h a r d n e s s o f t h e wa t e r (s e e R i n s e a i d a n d s a l t ). The l i d o n t h e s a l t d i s p e n s e r i s n o t c l o s e d p ro p e rl y. The ri n s e a i d h a s b e e n u s e d u p o r t h e d o s a g e i s t o o l o w. The c ro c k e ry i s m a d e f ro m n o n -s t i c k m a t e ri a l.
Th e d i s h e s a n d g l a s s e s a r e s tr e a k e d o r h a v e a b l u i s h t i n g e. Th e c r o c k e r y h a s n o t b e e n d r i e d p r o p e r l y.
The ri n s e a i d d o s a g e i s t o o h i g h.
A was h c y c l e wi t h o u t a d ry i n g p r o g r a m m e h a s b e e n s e l e c t e d. The ri n s e a i d h a s b e e n u s e d u p o r t h e d o s a g e i s t o o l o w (s e e R i n s e a i d a n d s a l t ). The ri n s e a i d d i s p e n s e r s e t t i n g i s n o t h i g h e n o u g h.
Th e d i s h e s a r e n o t c l e a n.
T h e ra c k s a r e o v e rl o a d e d ( s e e L o a d i n g t h e ra c k s ). T h e c ro c k e ry h a s n o t b e e n a rra n g e d we l l. T h e s p ra y e r a r m s c a n n o t m o v e f re e l y. T h e wa s h c y c l e i s t o o g e n t l e (s e e W as h c y c l e s ). A n e xc e s s i v e a m o u n t o f f o a m h a s b e e n p ro d u c e d : t h e d e t e rg e n t h a s n o t b e e n m e a s u re d o u t c o rr e c t l y o r i t i s n o t s u i t a b l e f o r u s e i n d i s h wa s h e rs (s e e S t a rt -u p a n d u s e ). T h e l i d o n t h e ri n s e a i d c o m p a rt m e n t h a s n o t b e e n s h u t c o rre c t l y. T h e f i l t e r i s d i r t y o r b l o c k e d (s e e C a re a n d m a i n t e n a n c e ). T h e re f i n e d s a l t l e v e l i s l o w (s e e R i n s e a i d a n d s a l t ). T h e re i s n o w a t e r i n t h e m a i n s s u p p l y. T h e wa t e r i n l e t h o s e i s b e n t (s e e I n s t a l l a t i o n ). T u r n o n t h e t a p a n d t h e a p p l i a n c e wi l l s t a r t a f t e r a f e w m i n u t e s. The appliance lock has been activated beca use no action was taken when the beeps sounded. S wi t c h o f f t h e m a c h i n e u s i n g t h e O N / O F F b u t t o n , t u r n o n t h e t a p a n d s wi t c h t h e m a c h i n e b a c k o n a f t e r a f e w s e c o n d s b y p re s s i n g t h e s a m e b u t t o n. R e -p r o g r a m m e t h e m a c h i n e a n d re s t a rt t h e w a s h c y c l e.

Th e d i s h w a s h e r d o e s n o t t a k e a n y w a t e r i n - T a p s h u t -o ff a l a r m (s e v e ra l s h o rt b e e p s a re emitted) (the ON/OFF indicator light flashes and the following message appears on the display: No water. Open tap. After a few seconds, A:6 will appear).
W a te r l o a d i n g s o l e n o i d v a lv e m a l fu n c ti o n a l a r m (the ON/OFF indicator light flashes and A:2 appears on the display).
S wi t c h o f f t h e a p p l i a n c e b y p re s s i n g t h e O N / O F F b u t t o n a n d s wi t c h i t b a c k o n a f t e r a p p ro x i m a t e l y o n e m i n u t e. I f t h e a l a rm c o nt i n u e s , s h u t o f f t h e wa t e r t a p t o e l i m i n a t e t h e ri s k o f f l o o d i n g , re m o v e t h e p l u g f ro m t h e e l e c t ri c a l s o c k e t a n d c o n t a c t A s s is t a n c e.
W a te r i n l e t h o s e a l a r m /W a te r i n l e t fi l te r b l o c k e d. (the ON/OFF indicator light flashes and A:7 appears on the display).
S wi t c h o f f t h e a p p l i a n c e b y p re s s i n g t h e O N / O F F b u t t o n. S h u t o f f t h e w a t e r t a p t o e l i m i n a t e t h e ri s k o f f l o o d i n g a n d re m o v e t h e p l u g f ro m t h e e l e c t ri c a l s o c k e t. M a k e s u r e t h e wa t e r i n l e t f i l t e r h a s n o t b e c o m e b l o c k e d b y v a ri o u s i m p u r i t i e s. ( s e e C a r e a n d m a i n t e n a n c e c h a p t e r ).

Mode demploi

LAVE-VAISSELLE FR

Sommaire

Installation, 14-15
Mise en place et mise niveau Raccordements eau et lectricit Conseils pour le premier lavage Caractristiques techniques
Description de lappareil, 16
Vue densemble Tableau de bord

Charger les paniers, 17

Panier infrieur Panier couverts Panier suprieur
Mise en marche et utilisation,18-19
Mettre en marche le lave-vaisselle Charger le produit de lavage Options de lavage

Programmes, 20

Overall view Control panel

Loading the racks, 17

Lower rack Cutlery basket Upper rack

Start-up and use, 18-19

Starting the dishwasher Measuring out the detergent Wash options

Wash cycles, 20

Table of wash cycles
Rinse aid and refined salt, 21
Measuring out the rinse aid Measuring out the refined salt

Care and maintenance, 22

Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods
Precautions, advice and Assistance,23
General safety Disposal Saving energy and respecting the environment Assistance

Troubleshooting, 24

Installation
Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance. If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.
Connecting the water inlet hose
To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a gas threaded connection. To a suitable hot water connection point: your dishwasher may be supplied with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60C. Screw the hose to the tap as described for connection to a cold water supply. If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance). The water pressure must be within the values indicated in the Technical data table (see adjacent information). The hose should not be bent or compressed.
Positioning and levelling
1. Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed any further with the installation process. 2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction sheet). 3. Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position. If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating. 4.* Adjust the height of the rear foot from the front of the appliance* on the central lower part of the dishwasher, turning a hexagonal spanner (red color) with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height.

Anti-flooding protection

To ensure floods do not occur, the dishwasher: - is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance. Some models are also equipped with the supplementary safety device New Acqua Stop*, which guarantees antiflooding protection even in the event of a supply hose rupture.
Connecting the water and electricity supplies
Connection to the water and electricity supplies should only be performed by a qualified technician. The dishwasher should not stand on top of the water hoses or the electricity supply cable. The appliance must be connected to the water supply network using new hoses. Do not use old hoses. The water inlet (A) and outlet (B) hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation (see figure).
WARNING: HAZARDOUS VOLTAGE!
Under no circumstance should the water inlet hose be cut as it contains live electrical parts.
* Only available in selected models.
Connecting the water outlet hose
Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 4 cm. Alternatively, rest it over a sink or tub; the free end of the hose should not remain immersed in water. The special plastic elbow* makes it easier to find the best layout: fix the elbow to the wall securely in order to prevent the outlet hose from moving and spilling the dirty water. The part of the hose marked with the letter A should be between 40 and 100 cm above the ground (see

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form.
After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add only then approximately 1 kg of salt (see chapter entitled Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. Select the water hardness value (see chapter entitled Rinse aid and refined salt). - After the salt has been poured into the machine, the LOW SALT indicator light* switches off. If the salt container is not filled, the water softener and the heating element may be damaged as a result.
Advice regarding the first wash cycle
figure). We advise against the use of hose extensions.

Electrical connection

Before inserting the plug into the electrical socket, make sure that: The socket is earthed and complies with current regulations. The socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see chapter entitled Description of the appliance). The power supply voltage falls within the values indicated on the data plate on the inside of the door. The socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance); do not use extension cables or multiple sockets. Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible. The cable should not be bent or compressed. If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See Assistance) The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

Technical data

Dimensions
width 60 cm height 85 cm depth 60 cm 12 standard place-settings 0,05 1MPa (0.bar) 4.3 psi 145 psi See appliance data plate
Capacity Water supply pressure Power supply voltage
Total absorbed See appliance data plate power Fuse See appliance data plate This dishwasher conforms to the following European Community Directives: -73/23/EEC dated 19/02/73 (Low Voltage) and subsequent modifications -89/336/EEC dated 03/05/89 (Electromagnetic Compatibility) and subsequent modifications -97/17/EC (Labelling) -2002/96/ CE Waste Electrical and Electronic Equipment (WEEE)
Description of the appliance

Overall view

Upper rack Upper sprayer arm Tip-up compartments Rack height adjuster Lower rack Lower sprayer arm Cutlery basket Washing filter Salt dispenser Detergent and rinse aid dispensers Data plate Control Panel***

Control panel

ShorTime option indicator light * Low salt indicator light * Multi-functional tablets indicator light* Select wash cycle button Good Night option indicator light * Extra Dry indicator light* Half load upper and lower rack indicator lights * Time remaining light-up display Start/Pause button and indicator light
Wash cycle name indicator light

ON/OFF indicator light

ON/OFF/Reset button
Low rinse aid indicator light *
Multi-functional tablets button * Option button ShorTime * Good Night option button*
Delayed start indicator light* Delayed start button * Half load button* Extra Dry button *
***Only in completely built-in models. * Only available in selected models.

Loading the racks

Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and cups. After loading the appliance, check that the sprayer arms can rotate freely.
Adjusting the height of the upper rack
In order to make it easier to arrange the crockery, the upper rack may be moved to a higher or lower level. (in models which offer the Baby cycle, the upper rack must be placed in its lower position when the appliance is being loaded). The height of the upper rack should ideally be adjusted WHEN THE RACK IS EMPTY. Never lift or lower the rack on one side only. Open the left and right guide rail stops and pull out the rack; position it higher or lower as required, slide it along the guide rails until the front wheels are in place and close the stops (see figure). If the rack is fitted with Dual Space handles* (see figure), pull out the upper rack until it reaches its stop point, grip the handles at the sides of the rack and move it upwards or downwards, then slowly let it fall back into place.

Lower rack

The lower rack can hold pans, lids, plates, salad bowls, cutlery, etc. as seen in the Loading examples. Plates and large covers should be placed at the sides of the rack, ensuring that they do not block the rotation of the upper sprayer arm. Some dishwasher models are fitted with tip-up sections*, which can be used in a vertical position when arranging plates or in a horizontal position when arranging pans and salad bowls.
The type of cutlery basket may vary according to the dishwasher model: it may be modular, non-modular or a sliding version. The non-modular basket must only be positioned at the front of the lower rack. The modular basket may be separated into two parts, a solution which is recommended when performing a half load wash (only in models offering this option), is available in a sliding version (positioned at any point on the lower rack by sliding it between the fixed or tip-up inserts. - Both versions are fitted with a collapsible sliding system which means the cutlery can be arranged in the best possible way. Knives and other utensils with sharp edges must be placed in the cutlery basket with the points facing downwards, or they must be positioned horizontally in the tip-up compartments on the upper rack.

Cutlery basket

Loading examples for the upper rack
Loading examples for the lower rack
Cutlery basket positioning examples
For dishwasher models with a Baby Cycle, tip-up compartments suitable for washing bottles, rings and teats are provided. (see the instruction sheet)
Baby Tip-up compartments*
Items which should not be washed in the dishwasher
Load this rack with delicate and lightweight crockery: glasses, tea and coffee cups, saucers, small salad bowls, saucepans and small saucepans which are not too soiled, using the Loading examples as a guide. Mugs and cups: place these on the tip-up compartments**. Long sharp knives and serving utensils: place these on the tip-up compartments**.

Upper rack

Wooden items, objects with wooden or horn handles or gluedon parts. Items made from aluminium, copper, brass, pewter or tin. Items made from plastic material which is not heat-resistant. Antique or hand-painted porcelain. Antique silver. Silver which is not antique may, however, be washed in the dishwasher using a delicate wash cycle, provided that it does not come into contact with other metals. We recommend the use of crockery which is dishwasher safe.
* Only available in selected models. ** The number and position may vary.

Start-up and use

Switching the appliance on for the first time

Selecting the language

Press the ON/OFF symbol; you will hear a short beep and the display will show the set language. Use the DELAYED START button to scroll forwards, or the HALF LOAD button to scroll backwards through the list until you reach the desired language. Press the P button to confirm the selection; you will then automatically enter the list of wash cycles. Every time the dishwasher is switched on subsequently, the list of wash cycles will be displayed. The language may also be changed at a later date, by pressing the P button and the DELAYED START button simultaneously for a few seconds. 1. Turn the water tap on. 2. Press the ON/OFF button: you will hear a short beep and the display will light up. 3. Open the door and pour in a suitable amount of detergent (see below). 4. Load the racks (see Loading the racks) and shut the door. 5. Select the wash cycle in accordance with the type of crockery and its soil level (see Table of wash cycles) by pressing the P button. 6. Select the wash options (see adjacent information). 7. Start the cycle by pressing the Start button: a long beep signals the start of the wash cycle; the name of the selected cycle is displayed, along with the time remaining until the end of the cycle. 8. Two short beeps and one long one indicate the end of the wash cycle and the text CYCLE END appears on the display. Switch off the appliance by pressing the ON/OFF button, shut off the water valve and unplug the appliance from the electricity socket. 9. Wait for a few minutes before removing the crockery, in order to avoid burns. Unload the racks, beginning with the lower level. The order in which the different wash cycles are displayed will change according to the frequency with which each cycle is used. AUTO WASH CYCLES*: this model of dishwasher is equipped with a special sensor which can be used to assess the level of soiling and automatically select the most efficient and economic wash cycle accordingly. The duration of the auto wash cycles may vary due to the operation of the sensor. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly.

Adding extra crockery

Press the Start/Pause button (the corresponding indicator light will flash). Open the door, taking care to avoid the escaping steam, and place the crockery inside the appliance. Press the Start/Pause button (fixed light): the cycle will restart after a prolonged beep is emitted. If the Start/Pause button is pressed so as to pause the machine, the wash cycle or the Delayed Start function (if selected) is interrupted. At this stage it is not possible to change the wash cycle.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or once the electricity supply is restored.

Starting the dishwasher

Measuring out the detergent
A good wash result also depends on the correct amount of detergent being used; exceeding the stated amount does not result in a more effective wash and increases environmental pollution.
Only use detergent which has been specifically designed for dishwashers. DO NOT USE washing up liquid. Using excessive detergent may result in foam residue remaining in the machine after the cycle has ended. To achieve the best results from each washing and drying cycle, powder detergent, rinse aid liquid and salt should be used.
Compartment A: Washing detergent Compartment B: Pre-wash detergent 1. Open cover C by pressing button D. 2. Pour in the detergent after consulting the Table of wash cycles: For powder detergent use compartments A and B. For detergent in tablet form: when the cycle requires 1 tablet, place it in compartment A and close the cover; C when it requires 2, place the second tablet at the bottom of the appliance. 3. Remove detergent residues from the edges of the compartment and close the cover until it clicks.

Wash options*

The OPTIONS may only be set, modified or reset after the wash cycle has been selected and before the Start/ Pause button has been pressed.
Only the options which are compatible with the type of wash cycle set may be selected. If an option is not compatible with the selected wash cycle (see Table of wash cycles), the corresponding LED flashes rapidly 3 times and 2 short beeps will sound. If an option is selected which is incompatible with another (previously selected) option, the indicator light corresponding to the option selected first will flash 3 times, 3 beeps will sound and it will
Modifying a wash cycle in progress
If a mistake was made during the wash cycle selection process it is possible to change the cycle, provided that it has only just begun: once the wash cycle has started, switch off the machine by pressing and holding the ON/OFF/Reset button. Switch it back on using the same button and select the desired wash cycle and options.
be deselected, while the most recently selected option will remain active. To deselect an option which has been set by mistake, press the corresponding button again.

The ShorTime and Good Night options are not compatible with each other. The ShorTime and Good Night options are not compatible with the HALF LOAD option.
Half load using the upper or lower rack
If there are not many dishes to be washed, a half load cycle may be used in order to save water, electricity and detergent. Select the wash cycle and press the HALF LOAD button repeatedly: the triangle corresponding to the selected load will illuminate and the wash cycle will take place only using the upper or lower rack. If the button is pressed again, the option will be deselected. The Half Load option is not compatible with the Good Night and ShorTime options. Remember to load the upper or lower rack only, and to reduce the amount of detergent accordingly.
Multi-functional tablets*
This option optimises washing and drying results. When using multi-functional tablets, press the MULTIFUNCTIONAL TABLETS button; the corresponding indicator light will illuminate. If the button is pressed again the option will be deselected. The Multi-functional tablets option results in the lengthening of the wash cycle. The MULTI-FUNCTIONAL TABLETS option remains set for subsequent wash cycles if it is not deselected.
It is better to use powder detergent in this case. This option is incompatible with the following wash cycle: Quick wash.
The use of tablets is only recommended when the MULTI-FUNCTIONAL TABLETS option is available.
This option is not recommended for use with wash cycles which do not specify the use of multi-functional tablets (see Table of options).

Delayed start

It is possible to delay the start time of the cycle for a period of time between 1 and 24 hours. 1. After selecting the desired wash cycle and any other options, press the DELAYED START button. The Delayed Start symbol will begin to flash. Use the same button to select the time at which you wish the wash cycle to begin (after a period of 1 to 24 hours).

Extra drying

To improve the dryness level of the crockery, press the EXTRA DRYING button; the indicator light will illuminate. If it is pressed again the option will be deselected. The EXTRA DRYING option increases the duration of the wash cycle.
2. Confirm the selection using the STAR/PAUSE button; the symbol will stop flashing and the countdown will begin. The text Begin in will be displayed, the selected delay time will flash and the START/PAUSE button will remain lit in a fixed manner. 3. When the set time has elapsed, a long beep sounds, the DELAYED START indicator light switches off and the wash cycle begins.

To deselect the DLEAYED START option, press the DELAYED START button repeatedly until the text OF. appears. The Delayed Start function cannot be set once a wash cycle has been started.

SELFCARE WASH CYCLE

This disinfecting wash cycle deep cleans the inside of the dishwasher, thereby reducing the formation of bad odours.

WARNING

The SELFCARE wash cycle should be performed as part of your dishwasher maintenance routine, using special singledose products (follow the instructions on the packaging) while the dishwasher is EMPTY.

Table of options*

A Delayed Start Auto Super wash Auto Normal Daily A 60 Soak Eco 50C Speed 25 Crystal Baby Cycle Auto Duo Wash Ultra Intensive Special Guest SelfCare Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes B Half Load Yes Yes Yes Yes Yes No Yes No No Yes Yes No C Tabs Yes Yes Yes No Yes Yes Yes No Yes Yes No No D Extra Dry Yes Yes No No Yes NO Yes No Yes Yes Yes No E Shor Time Yes Yes No No No No No No Yes No No No F Good Night No Yes No No Yes No No No No No No No

ShorTime* option

This option can be used to reduce the duration of the main wash cycles while maintaining the same washing and drying performance levels. After selecting the wash cycle, press the ShorTime option button; the illumination of the corresponding indicator light followed by a short beep indicates its selection. To deselect the option, press the same button again.

Good Night option*

This option reduces the amount of noise made by the machine and lengthens the wash cycles. It is a useful option because it enables users to benefit from the night-time energy rate. After selecting the wash cycle, press the Good Night option button; the illumination of the corresponding indicator light followed by a short beep indicates its selection. To deselect the option, press the same button again.

Wash cycles

For available OPTIONS please refer to the Table of options on the Start-up and use page. The number and type of wash cycles and options may vary depending on the dishwasher model.
Detergent (A) = com partm ent A (B) = com partm ent B Powder Heavily soiled dishes and pans (not to be used for delicate item s). Auto Super Wash Liquid Tablets W ash cycles which include drying W ash cycle duration (tolerance 10%) Hrs. Min.
W ash cycle selection instructions

W ash cycle

Options

A -B-C-DE

Norm ally soiled pans and dishes. Standard daily wash cycle.

Auto Norm al

25 m l (A) 5 m l (B)

A -B-C-DE-F

Lim ited quantity of daily soiling. (4 place settings + 1 saucepan +1 frying pan). Pre-wash for dishes while awaiting com pletion of the load with the dishes from the next m eal. Environm entally-friendly wash cycle with low energy consum ption levels, suitable for pans and dishes. Econom ic and fast wash to be used for lightly soiled dishes. (Run cycle imm ediately after use) (2 plates + 2 glasses + 4 pieces of cutlery + 1 saucepan + 1 sm all frying pan). Econom ic and fast wash for delicate items which are sensitive to high tem peratures. (Run cycle imm ediately after use) (12 glasses + delicate plates). Disinfecting wash cycle suitable for washing bottles, rings and teats together with plates, cups, glasses and cutlery. The crockery should only be loaded on the upper rack. W ash spread over the two racks: delicate for crystal and glasses on the upper rack and heavy duty for the pans on the lower rack.

Daily A 60

Eco * 50 C

A B-C-DF

Speed 25

Crystal

A BC-D

Baby Cycle

Auto Duo Wash

A CD-E

Heavily soiled saucepans or pans with residual dried-on food.

Ultra Intensive

30 m l (A) 5 m l (B)
1 (A) 1 (bottom of the appliance)

A B CD

Rinse and drying cycle for dishes that are seldom used and are only dusty. Disinfecting cycle for cleaning the inside of the dishwasher, to be carried out only when the dishwasher is EMPTY using specific detergents designed for dishwasher m aintenance.

Special Guest

No SelfCare
Notes: Optimum performance levels when using the "Daily A 60 and "Speed 25 cycles can be achieved by observing the maximum amounts of crockery specified. To make it easier to measure out the detergent, it is worth remembering that: 1 tablespoon = 15 grams of powder = approximately 15 ml of liquid - 1 teaspoon = 5 grams of powder = approximately 5 ml of liquid

* The Eco wash cycle adheres to the regulation EN-50242. Although it has a longer duration than other wash cycles it uses less energy and is les harmful to the environment. Note for Test Laboratories: for information relating to comparative EN testing conditions, please send an email to the following address: ASSISTENZA_EN_LVS@indesitcompany.com
Rinse aid and refined salt
Only use products which have been specifically designed for dishwashers. Do not use table salt or industrial salt, or washing up liquid. Follow the instructions given on the packaging.
If using a multi-functional product it is not necessary to add rinse aid; however, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. Follow the instructions given on the packaging. - Press the P button repeatedly until the desired hardness level has been reached (1-2-3-4-5* see Water hardness table), up to a maximum of 5 levels. - To exit the function, wait approximately 30 seconds or press another option button, or switch off the machine using the ON/OFF button. Even if using multi-functional tablets, the salt dispenser should still be filled.

Water Hardness Table

dH fH mmol/l 1.2.3.6.level 5*
If you do not add salt or rinse aid, the LOW SALT* and LOW RINSE AID* indicator lights remain lit.
Measuring out the rinse aid
Rinse aid makes it easier for the crockery to dry, as water runs off surfaces more readily and therefore does not leave streaks or marks. The rinse aid dispenser should be filled: When the LOW RINSE AID* indicator light on the control panel is illuminated; 1. Open the dispenser by turning the lid (G) in an anticlockwise direction. 2. Pour in the rinse aid, making sure it does not overflow from the dispenser. If this happens, clean the spill immediately with a dry cloth. F 3. Screw the lid back on. G NEVER pour the rinse aid directly into the appliance tub.
For values between 0f and 10f, we do not recommend the use of salt. * this setting may cause a slight increase in the duration of the cycle.
(dH = hardness measured in German degrees - f = hardness measured in French degrees - mmol/l = millimoles per litre)
Adjusting the amount of rinse aid
If you are not completely satisfied with the drying results, you may adjust the quantity of rinse aid used. Use a screwdriver to turn the dosage adjuster (F) to one of the 6 pre-set positions (the default position is set to 4): If there are streaks on the crockery, set the adjustment device to a lower number (1-3). If drops of water remain on the crockery or if there are limescale marks present after the cycle has finished, set the adjuster to a higher number (4-6).

Cleaning the water inlet filter*
Disconnect the appliance from the electricity supply and shut off the water tap. Leave the door of the appliance ajar.
When you return, run a wash cycle when the dishwasher is empty.
Precautions, advice and Assistance
This appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety reasons and should therefore be read carefully. If your electricity supply contract gives details of electricity saving time bands, run wash cycles during the periods when a lower tariff is applied. The Delayed start* button (see Start-up and use) helps you organise the wash cycles accordingly.

General safety

The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use. The appliance must be used by adults only, to wash domestic crockery in accordance with the instructions in this manual. The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the machine exposed to rain and storms. Do not touch the appliance when barefoot. When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable. The water supply tap must be shut off and the plug should be removed from the electrical socket before cleaning the appliance or carrying out any maintenance work. If the appliance breaks down, do not under any circumstances touch the internal parts in an attempt to perform the repair work yourself. Never touch the heating element. Do not lean or sit on the open door of the appliance: this may cause the appliance to overturn. The door should not be left open as it may create a dangerous obstacle. Keep detergent and rinse aid out of reach of children. The packaging material should not be used as a toy.
Phosphate-free and chlorine-free detergents containing enzymes
We strongly recommend that you use detergents that do not contain phosphates or chlorine, as these products are harmful to the environment. Enzymes provide a particularly effective action at temperatures around 50C, and as a result detergents containing enzymes can be used in conjunction with lowtemperature wash cycles in order to achieve the same results as a normal 65C wash cycle. To avoid wasting detergent, use the product in appropriate quantities based on the manufacturers recommendations, the hardness of the water and the soil level and quantity of crockery to be washed. Even if they are biodegradable, detergents contain substances which may alter the balance of nature.

Assistance

Before contacting Assistance:

Check whether the problem can be resolved using the Troubleshooting guide (see Troubleshooting). Restart the programme to check whether the problem has ceased to exist. If the problem persists, contact the Authorised Technical Assistance Service. Never use the services of unauthorised technicians.

Disposal

Disposal of packaging materials: observe local legislation so that the packaging may be reused. The European Directive 2002/96/EC relating to Waste Electrical and Electronic Equipment (WEEE) states that household appliances should not be disposed of using the normal solid urban waste cycle. Exhausted appliances should be collected separately in order to optimise the cost of re-using and recycling the materials inside the machine, while preventing potential damage to the atmosphere and to public health. The crossed-out dustbin is marked on all products to remind the owner of their obligations regarding separated waste collection. For further information relating to the correct disposal of household appliances, owners may contact the relevant public authority or the local appliance dealer.
Please have the following information to hand:
Saving energy and respecting the environment

Saving water and energy

Only begin a wash cycle when the dishwasher is full. While waiting for the dishwasher to be filled, prevent unpleasant odours using the Soak cycle (see Wash cycles). Select a wash cycle which is suited to the type of crockery and to the soil level of the crockery using the Table of wash cycles: - For dishes with a normal soil level, use the Eco wash cycle, which guarantees low energy and water consumption levels. - If the load is smaller than usual activate the Half load option* (see Start-up and use).
The type of malfunction. The appliance model (Mod.). The serial number (S/N). This information can be found on the appliance data plate (see Description of the appliance).

Troubleshooting

12/2007 - Xerox Business Services

195064128.02

Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance.

Malfunction:

The dishwasher does not start.
Possible causes / Solutions:
The p lu g h a s n o t b e e n in s e rte d in to th e e le c tric a l s o c k e t p ro p e rly, o r there is no p o w e r in the h ou se. The d is h w a s h e r d o o r h a s n o t b e e n s h u t p ro p e rly. A delayed sta rt has been p rog ram m ed (s ee S tart-u p an d use).

The dishw ash er does not take an y w ater in - Tap shut-off alarm (seve ral sho rt beeps are em itted) (the ON/OFF indicator light flashes and the following m essage appears on the display: No water. Turn on tap. After a few seconds, A:6 will appear).
W ater lo ad in g so len o id valve m alfunction a larm (the ON/OFF indicator light flashes and A:2 appears on the display).
S witch off the app liance b y pressing the O N /O F F button and s witch it back on after a pp ro xim ately one m inute. If the alarm continues, shut off the water ta p to elim inate the risk of floodin g, rem ove th e plug fro m the e le c tric a l s o c k e t a n d c o n ta c t A s s is ta n c e.
W ater inlet ho se alarm (the ON/OFF indicator light flashes and A:1 appears on the display). W ater in let h o se alarm /W ater inlet filter blo ck ed. (the ON/OFF indicator light flashes and A:7 appears on the display).
S witch off the app liance b y pressing the O N /O F F button. S hut off the w ater tap to e lim inate the risk of flooding, rem ove the p lu g from the e le c tric a l s o c k e t a n d c o n ta c t A s s is ta n c e.
S witch off the app liance b y pressing the O N /O F F button. S hut off the w ater tap to e lim inate the risk of flooding an d rem ove the plug from the electrical sock et. M ake sure the wate r inlet filter has not beco m e blocked by vario us im purities. (see C are an d m aintena nce ch a pter).