Reviews & Opinions
Independent and trusted. Read before buy HP Cisco MDS 9222I Multiservice Modular Fabric Switch!

HP Cisco MDS 9222I Multiservice Modular Fabric Switch

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
HP Cisco MDS 9222I Multiservice Modular Fabric Switch, size: 1.1 MB
Related manuals
HP Cisco MDS 9222I Multiservice Modular Fabric Switch Storageworks C-series Fabric Switches For San-os Release 3.1(3a) And Fabricware
HP Cisco MDS 9222I Multiservice Modular Fabric Switch Cisco Mds 9000 Family Release Notes For Cisco Mds San-os Release 3.2(1) (ol-1411
HP Cisco MDS 9222I Multiservice Modular Fabric Switch Cisco Mds 9000 Family Release Notes For Cisco Mds San-os Release 3.1(3) (ol-1220
HP Cisco MDS 9222I Multiservice Modular Fabric Switch Cisco Mds 9000 Family Fabric Manager Quick Configuration Guide (ol-7765-06, Nove
HP Cisco MDS 9222I Multiservice Modular Fabric Switch Cisco Mds 9000 Family Command Reference - Cisco Mds San-os Release 3.0(1) Throug

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

HP Cisco MDS 9222I Multiservice Modular Fabric SwitchCisco MDS 9222i MultiService Fabric Switch Switch - 18 ports

62.2 lbs, 17.3″ x 22.7″ x 5.2″

The Cisco MDS 9222i Multiservice Modular Fabric Switch brings flexible, high performance Storage Area Network (SAN) solutions usually reserved for director class switches, to the department or remote branch office level. This "all-in-one-box solution" provides eighteen 4-Gbps Fiber Channel ports and four 1-Gbps Ethernet IP storage services ports in the base unit, plus an open slot for modular expansion. The MDS 9222i Fabric Switch is capable of expanding up to 66 Fiber Channel ports wi... Read more

 

[ Report abuse or wrong photo | Share your HP Cisco MDS 9222I Multiservice Modular Fabric Switch photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 7. Page 1 of 1. Average Rating:
sheeko 5:24am on Friday, October 15th, 2010 
The product that I received looked great and appeared new and unopened. However, when installed. I had been using this system since a May 2007 purchase.Now the system will not pass validation. MicroSoft saysa KEYGEN program was used for this.
jallenc 9:29pm on Monday, June 14th, 2010 
I installed Windows XP Pro on two computers - one with a Pentium IV 3.0 HT and one with an Amd XP 2900+ I started from OEM hard drives (unformatted). Microsoft Windows XP Professional is a wonderful operating system to work with. I have been using it for several years and I am very pleased.
gruad 8:18am on Monday, June 7th, 2010 
Im tired of hearing all the linix, unix, mac fanboys say its horrable. Directions for installation were good, no trouble installing. Was used to 98SE and just have to get used to the differences.
PredatorVI 1:23am on Monday, March 29th, 2010 
Worth getting, but be sure you have MS& 7 Home Premium. Easy To Install Enjoy using this mouse. It makes using my new netbook easier/more fun. I particularly like the size, not too big/not too small.
scott22 3:48pm on Thursday, March 25th, 2010 
Stability and Durability 3Ease of Use 3Speed ...  Speed is exceptional, Stability and Durability is also okay. Ease of Use is lacking. it isnt worth buying...  its ok compared to home edition linux is way better
zedkatuf 12:10am on Monday, March 22nd, 2010 
Well, what can I say it works fine, and lacks...  compatible, stable easily becomes unstable, activation is impossible, and security is a joke
Craig Colby 10:10am on Friday, March 12th, 2010 
Users can experience to a higher level of system uptime. Windows XP Home Edition operating system is Windows XP that is intended for home users. Basically.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Cisco MDS 9000 Family Fabric Switch Portfolio
Cisco MDS 9000 family fabric switches are cost-effective, highly scalable, easy-to-install, and highly configurable Fibre Channel switches that are ideal for small to medium-sized businesses (SMBs) and departmental and remote branch offices needing intelligent storage area networks (SANs). With deployment options ranging from stand-alone, top-of-the rack, and blade switches for IBM BladeCenter and HP c-Class BladeSystem, the Cisco MDS 9100 Series Multilayer Fabric Switches provide customers with exceptional flexibility, while maintaining consistent feature sets and management capabilities. In addition, the Cisco MDS 9222i Multiservice Modular Switch offers customers a modular yet highly compact form factor solution that provides an optimized platform for deploying high-performance SAN extension solutions, distributed intelligent fabric services, and cost-effective multiprotocol connectivity for both open and mainframe environments. With the Cisco MDS 9222i expansion slot, enterprise customers with Cisco MDS 9000 family director-class solutions can maximize existing investments and extend the capabilities of their core infrastructure into the fabric space. Figure 1 shows the Cisco MDS 9000 family multilayer fabric switches.
Figure 1. Cisco MDS 9000 Family Multilayer Fabric Switches

At-A-Glance

Cisco MDS IBM Blade Switch: Cisco 4-Gbps 10-port and 20-port Fibre Channel switch modules for IBM BladeCenter, BladeCenter T, and BladeCenter H Cisco MDS HP Blade Switch: Cisco MDS 9124e 12-port and 24-port fabric switches for HP c-Class BladeSystem
Cisco MDS 9222i Multiservice Modular Switch: Flexible platform for up to 66 ports of 4-Gbps Fibre Channel and 4 ports of Gigabit Ethernet; multiprotocol support for Fibre Channel, Fibre Channel over IP (FCIP), Small Computer System Interface over IP (iSCSI), and FICON; and capability to support Cisco Storage Media Encryption (SME) natively and the Cisco Data Migration Manager (DMM) with the addition of a storage services module (SSM)
Benefits of Cisco MDS 9000 Family Fabric Switches
The Cisco MDS 9000 family fabric switch portfolio brings nearly all the benefits of Cisco director-class solutions to an entirely new audience, with features such as the following:
Cisco fabric switches provide more features than competing products and offer thelowest total cost of ownership (TCO) for SMB and branch-office SAN deployments. Quick configuration wizard (on the Cisco MDS 9124 and 9134) simplifies and streamlines the deployment process. Based on the same Cisco MDS 9000 SAN-OS Software platform as the industry-leading Cisco director-class switches, the fabric switches offer many of the same features as thedirector-class switches. The switches provide a consistent feature set end-to-end. Cisco Fabric Manager and Cisco Device Manager are included in the price of the switch. Port licensing is enabled so that organizations can expand their deployments as they grow. SAN security is supported for authentication of devices on the fabric, and role-based access control (RBAC) is provided to restrict management access. There are no hidden licenses to enable features. The Cisco MDS 9000 family fabric switches support innovative Cisco features such as VSANs, PortChannels, quality of service (QoS), SAN security, SAN management, hardware-enforced zoning, and Cisco In Service Software Upgrade (ISSU) at no additional cost to the user. The Cisco MDS 9000 family Fibre Channel blade switch offers up to 20 or 24 autosensing Fibre Channel ports capable of speeds of 4, 2, and 1 Gbps. The Cisco MDS 9000 family Fibre Channel blade switches are designed to meet the performance and scalability requirements of the most demanding environments and have the same features and functions available as those on the Cisco MDS 9124 platform. The Cisco MDS 9222i provides SAN extension, disaster recovery, and business continuance, offering cost effectiveness. The Cisco MDS 9222i also provides modularity, allowing multiple blade options. This fabric switch also extends innovative features unique to Cisco, such as the Cisco DMM for heterogeneous data migration from one storage array to another and encryption of data sent through the fabric with Cisco SME.
Cisco MDS 9124 Cisco MDS 9222i

Cisco MDS 9134

Cisco Switch Module for IBM BladeCenter
Cisco MDS 9124e HP Blade Switch
Product Family Highlights
The Cisco MDS 9000 family fabric switches consist of the following: Cisco MDS 9124 Multilayer Fabric Switch: 24-port Fibre Channel 4-Gbps full-fabric switch; supports VSANs and PortChannels Cisco MDS 9134 Multilayer Fabric Switch: 32-port Fibre Channel 4-Gbps full-fabric switch with 2 ports of standard 10-Gbps Fibre Channel for uplinks or stacking; supports VSANs, PortChannels, and IBM Fibre Connector (FICON) Cisco MDS 9124 blade switches:

Table 1 summarizes the features that the Cisco MDS 9000 family fabric switch platforms offer to meet the storage network requirements of campus, SMB, and enterprise data centers.
Table 1. Cisco MDS 9000 Family Fabric Switch Platform Features Feature Cisco MDS IBM Blade Switch for IBM BladeCenter

10 or 20 No No

Storage Networking Solutions with Cisco Fabric Switches
Figure 2 shows sample configurations using Cisco MDS 9000 family fabric switches.
Figure 2. Sample SAN Configurations Using Cisco MDS 9000 Family Fabric Switches
Cisco MDS HP Blade Switch for HP c-Class BladeSystem

12 or 24 No No

Cisco MDS 9124

Cisco MDS 9222i

Benefit

SAN Type

Sample Configuration Diagram

Solution Focus

E-mail
8 to 24 No No 24 to 64 Yes No 18 to 66 No 4 Buy what you need, pay as you grow Scalability with high performance Transparent integration of FCIP and iSCSI storage High flexibility, smooth migration, and investment protection with fabric storage services modules High-availability features to minimize disruption Capability for business continuity solutions Critical for high availability Isolation of fabric disruption without the need to spend money on isolated SAN islands Secure port-level access Time-efficient. easy setup and network monitoring and fabric management
Cisco MDS 9000 Fabric Switch
Storage Arrays Tape Libraries

Shared

4-Gbps Fibre Channel Ports 10-Gbps Fibre Channel Ports Gigabit Ethernet Ports Modular Expansion Slot

Departmental SAN

Common

Database

Storage Backup

Simplified

Management

E-mail, Database

Enterprise Core-Edge SAN
Storage Arrays Tape Libraries Cisco MDS 9500 Director Switches Cisco MDS 9000 Fabric Switches
Scalability Security Compliance
Trunking or PortChannels and Safe Code Upgrades Extended Distance Support Redundant Power Supplies Virtual Fabric or VSAN

and Regulations Consolidation
Business Continuity Metro-SAN
Storage Arrays Tape Libraries Storage MAN

Business

Compliance

Continuity

Cisco MDS 9100 Fabric Switch Storage Arrays Tape Libraries
Business Continuity SAN over IP
and Regulations Simplified Management
Port Security Easy Configuration, Event Monitoring, and Fabric Management QoS
Yes Configuration wizard and Cisco Fabric and Device Managers
Yes Configuration wizard and Cisco Fabric and Device Managers Yes
Yes Cisco Fabric and Device Managers
WAN/LAN Cisco MDS 9222i Cisco MDS 9222i
Prioritization of business-critical applications in the fabric Data encryption for centralized security and transparent data movement with minimal application disruption
Consolidation Blade Fan-out SAN

Cisco SME and DMM

Cisco MDS 9100 Fabric Switches Cisco Switch Module for IBM BladeCenter
Consolidation Simplified Scalability Virtualization

Ordering Information

Table 2 lists ordering information for the Cisco MDS 9124, 9134, and 9222i. Table 3 lists ordering information for Cisco MDS IBM and HP Blade Switches.
Table 2. Ordering Information for Cisco MDS 9124, 9134, and 9222i Fabric Switches Description
Cisco MDS 9222i Multiservice Modular Switch Cisco MDS 9134 32-Port Multilayer Fabric Switch with 24 4-Gbps active ports, VSANs, PortChannels, and Cisco Fabric Manager Cisco MDS 9134 32-Port Multilayer Fabric Switch with 32 4-Gbps active ports, VSANs, PortChannels, and Cisco Fabric Manager Cisco MDS 9134 24-Port Multilayer Fabric Switch with VSANs, PortChannels, Cisco Fabric Manager, 2x10G License pre-installed, 2 copper X2 CX4 transceivers, and 1 copper cable. Must be ordered as a pair of units to enable 48-ports. Cisco MDS 9134 32-Port Multilayer Fabric Switch with VSANs, PortChannels, Cisco Fabric Manager, 2x10G License pre-installed, 2 copper X2 CX4 transceivers, and 1 copper cable. Must be ordered as a pair of units to enable 64-ports. Cisco MDS 9124 24-Port Multilayer Fabric Switch Cisco MDS 9124 On-Demand Ports (8), 4-Gbps Activation License

Part Number

DS-C9222i-K9 DS-C9134-K9 DS-C9134-1K9 DS-9134G-K9

DS-9134G-1K9

DS-C9124-K9 M9124PL8-4G and M9124PL8-4G=
Table 3. Ordering information for Cisco MDS IBM and HP Blade Switches Description Part Number
Cisco MDS Fibre Channel Blade Switch for IBM BladeCenter, BladeCenter T, and BladeCenter H IBM Part Number
Cisco 4Gb 20-port FC switch module for IBM Blade Center Cisco 4Gb 10-port FC switch module for IBM Blade Center Cisco 10-port License Upgrade for IBM Blade Center 4GB Modules 39Y9280 30Y9284 39Y9290

SFP Optics Options

Cisco 4Gb Short-Wave length 4-pack SFP Modules for IBM BladeCenter Cisco 4Gb Short-Wave length SFP Modules for IBM BladeCenter Cisco 4Gb Long-Wave length SFP Modules for IBM BladeCenter 41Y8596 41Y8498 41Y8600
Cisco MDS Fibre Channel Blade Switch for HP c-Class BladeSystem HP Part Number
Cisco MDS 9124e 12-port fabric switch Cisco MDS 9124e 24-port fabric switch Cisco MDS 9124e 12-port license upgrade AG641-63001 AG642-63001 T5169-63101
Copyright 2007 Cisco Systems, Inc. All rights reserved. Cisco, Cisco IOS, Cisco Systems, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

C45-439795-00 11/07

doc1

Intelligent network services: Cisco MDS 9222i uses VSAN technology for hardware-enforced, isolated environments within a single physical fabric, access control lists (ACLs) for hardware-based intelligent frame processing, and advanced traffic management features such as fabric-wide quality of service (QoS) to facilitate migration from SAN islands to enterprise-wide storage networks.
High-performance ISLs: Cisco MDS 9222i supports up to 16 Fibre Channel inter-switch links (ISLs) in a single PortChannel. Links can span any port on any module in a chassis for added scalability and resilience. Up to 4095 buffer-to-buffer credits can be assigned to a single Fibre Channel port to extend storage networks over very long distances.
Comprehensive network security framework: The Cisco MDS 9222i supports RADIUS and TACACS+, Fibre Channel Security Protocol (FC-SP), Secure File Transfer Protocol (SFTP), Secure Shell (SSH) Protocol, Simple Network Management Protocol Version 3 (SNMPv3) implementing AES, VSANs, hardware-enforced zoning, ACLs, and per-VSAN role-based access control (RBAC). Additionally, the Gigabit Ethernet ports offer IP Security (IPsec) authentication, data integrity, and hardware-assisted data encryption for FCIP and iSCSI.
IP Version 6 (IPv6) capable: The Cisco MDS 9222i supports IPv6 as mandated by the U.S. Department of Defense (DoD), Japan, and China. IPv6 support is provided for FCIP, iSCSI, and management traffic routed in-band and out-of-band.
Sophisticated diagnostics: The Cisco MDS 9222i provides intelligent diagnostics, protocol decoding, and network analysis tools as well as integrated call-home capability for added reliability, faster problem resolution, and reduced service costs.
VSANs Ideal for efficient, secure SAN consolidation, VSANs enable more efficient storage network utilization by creating hardware-based isolated environments with a single physical SAN fabric or switch. Each VSAN can be zoned as a typical SAN and maintains its own fabric services for added scalability and resilience. VSANs allow the cost of SAN infrastructure to be shared among more users, while helping ensure complete segregation of traffic and retaining independent control of configuration on a VSAN-by-VSAN basis. IVR In another step toward deploying efficient, cost-effective, consolidated storage networks, the Cisco MDS 9222i supports IVR, the industrys first routing function for Fibre Channel. IVR allows selective transfer of data between specific initiators and targets on different VSANs while maintaining isolation of control traffic within each VSAN. With IVR, data can transit VSAN boundaries while maintaining control plane isolation, thereby maintaining fabric stability and availability. IVR is one of the feature enhancements provided with the Cisco MDS 9000 Enterprise advanced software package and eliminates the need for external routing appliances, greatly increasing routing scalability while

Extends acceleration service as a fabric service to any port in the fabric regardless of where it is attached Fibre Channel write acceleration (FC-WA) and Fibre Channel tape acceleration (FC-TA) FCIP write acceleration (FCIP-WA) and FCIP tape acceleration (FCIP-TA) Fibre Channel and FCIP compression High availability using PortChannels with acceleration over Fibre Channel and FCIP Unified solution for disk and tape I/O acceleration over metropolitan area networks (MANs) and WANs Speed-independent acceleration that accelerates 1/2/4/8/10-Gbps links and consolidates traffic over 8/10Gigabit ISLs
Cisco SME Cisco SME services offer solutions that enable companies to address Payment Card Industry (PCI) Data Security Standards (DSS) 2.0 compliance and other legislative regulations such as the Health Insurance Portability and Accountability Act (HIPAA) that require companies to store and protect data at rest for a specified number of years while publicly disclosing security breaches.

Page 4 of 19

Cisco has services such as IP Security (IPsec) and the Cisco TrustSec solution to address data security while data is in motion. Cisco SME addresses data security for data at rest. Cisco SME is a fabric-based service that is scalable, nonintrusive and addresses heterogeneous environments.
Cisco SME enables data on tapes and in VTLs to be compressed, encrypted, and authenticated for centralized security management and data management and recovery.
Cisco SME enables encryption of data for disk storage arrays. Cisco SME (tape or disk) is supported in the fixed slot of the Cisco MDS 9222i, and its performance can be scaled by adding a Cisco MDS 9000 18/4-Port MSM in the expansion slot.
For ultra-high throughput, the Cisco MDS 9000 16-Port SSN is recommended because it has four encryption engines.
Cisco SME services employ clustering technology to create a highly available solution. The cryptographic cluster formed enhances reliability and availability, provides automated load balancing and failover capabilities, and simplifies provisioning as a single SAN fabric service rather than as individual switches or modules.
The Cisco Key Management Center (KMC) provides comprehensive key management for Cisco SME, with support for single- and multiple-site deployments. Cisco KMC provides essential features such as key archival, secure export and import and translation for distribution, and key shredding. It can also work in conjunction with the RSA RKM Appliance. For increased operational security, Smart Card readers and media are optionally available to protect master keys, facilitate master key storage, and help prevent unauthorized cryptographic cluster formation and key recovery.

The Cisco SME license can be used to enable encryption of either tapes or storage disk arrays. You should use a separate engine and license for each.
Cisco DMM Cisco DMM is an advanced software package comprising a fabric-based data migration solution that transfers block data nondisruptively across heterogeneous storage volumes and across distances, whether the host is online or offline. This data center-class solution helps mitigate the challenges experienced in migrating data, such as downtime, the need to add data migration software to servers, and the potential for data loss and corruption. By simply enabling the Cisco DMM feature on a Cisco MDS 9222i located anywhere in the SAN, data migration can be configured without host agents, without re-wiring, without effecting performance, and without downtime. Mainframe Support The Cisco MDS 9222i is mainframe-ready, with full support for IBM zSeries FICON and Linux environments provided with the Cisco MDS 9000 Mainframe advanced software package. Qualified by IBM for attachment to all FICONenabled devices in an IBM zSeries operating environment, Cisco MDS 9222i switches support transport of the FICON protocol in both cascaded and non-cascaded fabrics, as well as an intermix of FICON and open systems Fibre Channel Protocol traffic on the same switch. VSANs simplify intermixing of SAN resources among IBM z/OS, mainframe Linux, and open systems environments, enabling increased SAN utilization and simplified SAN management. VSAN-based intermix mode eliminates the uncertainty and instability often associated with zoningbased intermix techniques. VSANs also eliminate the possibility that a misconfiguration or component failure in one VSAN will affect operation in other VSANs. VSAN-based management access controls simplify partitioning of SAN management responsibilities between mainframe and open systems environments, enhancing security. FICON VSANs can be managed using the standard Cisco DCNM for SAN Essentials Edition, the Cisco command-line interface (CLI), or IBM CUP-enabled management tools, including SA/390, Resource Measurement Facility (RMF), and Dynamic Channel Path Management (DCM).

Page 5 of 19

The Cisco MDS 9000 Mainframe package is required for all Cisco MDS 9222i integrated FICON channel extension features. In combination with SAN extension capabilities, it enables FICON tape read and write acceleration. In combination with SAN extension and the Cisco MDS 9000 XRC Acceleration package, it enables acceleration of IBM z/OS Global Mirror (XRC) dynamic updates. Advanced Traffic Management The following advanced traffic-management capabilities are integrated as standard on the Cisco MDS 9222i:

Port security locks down the mapping of an entity to a switch port to help ensure that SAN security is not compromised by connection of unauthorized devices to a switch port.
VSAN-based access control allows customers to define roles in which the scope of the roles is limited to certain VSANs.

Page 6 of 19

FC-SP provides switch-switch and host-switch Diffie-Hellman Challenge Handshake Authentication Protocol (DH-CHAP) authentication supporting RADIUS and TACACS+ to help ensure that only authorized devices access protected storage networks.
Comprehensive IPsec protocol suite delivers secure authentication, data integrity, and hardware-based encryption for both FCIP and iSCSI deployments.
Digital certificates are issued by a trusted third party and are used as electronic passports to prove the identity of certificate owners.
Fabric binding for open systems helps ensure that the ISLs are enabled only between switches that have been authorized in the fabric binding configuration.
Cisco TrustSec Fibre Channel link encryption helps ensure data integrity and privacy.
Advanced Diagnostics and Troubleshooting Tools Management of large-scale storage networks requires proactive diagnostics, tools to verify connectivity and route latency, and mechanisms for capturing and analyzing traffic. The Cisco MDS 9000 Family integrates the industrys most advanced analysis and diagnostic tools, which are included as standard on the Cisco MDS 9222i. Power-on self-test (POST) and online diagnostics provide proactive health monitoring. The Cisco MDS 9222i implements diagnostic capabilities such as Fibre Channel traceroute to detail the exact path and timing of flows, and Switched Port Analyzer (SPAN) to intelligently capture network traffic. After traffic has been captured, it can be analyzed with Cisco Fabric Analyzer, an embedded Fibre Channel analyzer. Comprehensive port-based and flow-based statistics facilitate sophisticated performance analysis and service-level agreement (SLA) accounting. With the Cisco MDS 9000 Family, Cisco delivers a comprehensive toolset for troubleshooting and analysis of storage networks. Ease of Management To meet the needs of all users, the Cisco MDS 9222i provides three principal modes of management: the Cisco MDS 9000 Family CLI, Cisco DCNM for SAN Essentials and Advanced Editions, and integration with third-party storage management tools.
The Cisco MDS9222i presents a consistent, logical CLI. Adhering to the syntax of the widely known Cisco IOS Software CLI, the Cisco MDS 9000 Family CLI is easy to learn and delivers broad management capabilities. It is an extremely efficient and direct interface designed to provide optimal functions for administrators in enterprise environments.

Cisco MDS 9000 XRC Acceleration package: In conjunction with the SAN Extension over IP and Mainframe packages, this package provides acceleration (channel extension) over IP for the IBM z/OS Global Mirror replication solution, reducing the effects of latency at distances of up to 20,000 km.
Cisco MDS 9000 SME package: Separate packages for the fixed slot on the Cisco MDS 9222i and for either the Cisco MDS 9000 18/4-Port Multiservice Module or Cisco MDS 9000 16-Port SSN in the expansion slot enable Cisco SME to secure data stored on heterogeneous tapes, VTLs, and disks.
Cisco MDS 9000 DMM package: Separate packages for the fixed slot on the Cisco MDS 9222i and the Cisco MDS 9000 18/4-Port MSM in the expansion slot enable Cisco DMM to perform fabric-based data migration that transfers block data nondisruptively across heterogeneous storage volumes and across distances, regardless of whether the host is online or offline.
Cisco MDS 9000 IOA Services package: The Cisco MDS 9222i supports IOA services, an advanced software package that can significantly improve application performance when storage traffic is extended across long distances. When Fibre Channel and FCIP write acceleration is enabled, WAN throughput is optimized through reduced latency for command acknowledgments.
Cisco MDS 9000 SAN Extension over IP package: The features in this package are enabled as standard on the four fixed-slot 1 Gigabit Ethernet ports with the base Cisco MDS 9222i by default without the need of an additional license. This package can scale further to multiple application copies by acquiring additional SAN extension software package licenses in conjuction with an optional Cisco MDS 9000 18/4-Port MSM or Cisco MDS 9000 16-Port SSN inserted in the expansion slot. For these optional IP storage services-enabled modules, the Cisco MDS 9000 SAN Extension over IP package provides an integrated, cost-effective, and reliable business continuance solution that uses IP infrastructure by offering FCIP for remote SAN extension, along with a variety of advanced features to optimize the performance and manageability of FCIP links.

Table 1.

Advanced Software Packages Not Requiring Application Services Engine
Included or Optional Included Optional Optional Optional Optional
Advanced Software Packages Not Requiring Application Services Engine Cisco DCNM for SAN Essentials Edition Cisco DCNM for SAN Advanced Edition Cisco MDS 9000 Enterprise Cisco MDS 9000 Mainframe Cisco MDS 9000 XRC Acceleration

Page 8 of 19

Table 2.
Advanced Software Packages Requiring Application Services Engine
Standard Cisco MDS 9000 18/4-Port Engine in Fixed Slot Included2 Optional Optional Optional Optional

PID Type Hardware Location Application Engines Software Package/Hardware SAN Extension over IP I/O Accelerator (IOA) Services Data Mobility Manager (DMM) Storage Media Encryption (SME)
Spare PIDs Fixed Slot One 18/4-base Included M9222IIOA= M9222IDMMK9= M9200SME1FK9= Expansion Slot One 18/4-MSM M9200EXT1AK9= M92IOA184= M92DMM184K9= M9200SME1MK9= Four SSN-16 (1 per engine) M92EXTSSNK9= M92IOASSN= M92SMESSNK9=

Page 9 of 19

PID Type Storage Services Enabler (SSE)
Spare PIDs M9222ISSE1K9= M9200SSE184K9= -

Product Specifications

Table 5 lists the product specifications for the Cisco MDS 9222i.

Table 5.

Feature Product compatibility Software compatibility
Description Cisco MDS 9000 Family Cisco MDS 9000 SAN-OS Release 3.2(1) or later (Note: SAN-OS 3.x releases are End-of-Life but still supported) Cisco MDS 9000 NX-OS Release 4.1(1) or later Cisco MDS 9000 NX-OS Release 5.0(1) or later Cisco MDS 9000 NX-OS Release 5.2(1) or later for DCNM for SAN support

Protocols

Fibre Channel standards FC-PH, Revision 4.3 (ANSI INCITS 230-1994) FC-PH, Amendment 1 (ANSI INCITS 230-1994/AM1-1996) FC-PH, Amendment 2 (ANSI INCITS 230-1994/AM2-1999) FC-PH-2, Revision 7.4 (ANSI INCITS 297-1997) FC-PH-3, Revision 9.4 (ANSI INCITS 303-1998) FC-PI, Revision 13 (ANSI INCITS 352-2002) FC-PI-2, Revision 10 (ANSI INCITS 404-2006) FC-PI-3, Revision 4 (ANSI INCITS 460-2011) FC-PI-4, Revision 8 (ANSI INCITS 450-2008) FC-PI-5, Revision 6 (ANSI INCITS 479-2011) FC-FS, Revision 1.9 (ANSI INCITS 373-2003) FC-FS-2, Revision 1.01 (ANSI INCITS 424-2007) FC-FS-2, Amendment 1 (ANSI INCITS 424-2007/AM1-2007) FC-FS-3, Revision 1.11 (ANSI INCITS 470-2011) FC-LS, Revision 1.62 (ANSI INCITS 433-2007) FC-LS-2, Revision 2.21 (ANSI INCITS 477-2011) FC-SW-2, Revision 5.3 (ANSI INCITS 355-2001) FC-SW-3, Revision 6.6 (ANSI INCITS 384-2004) FC-SW-4, Revision 7.5 (ANSI INCITS 418-2006) FC-SW-5, Revision 8.5 (ANSI INCITS 461-2010) FC-GS-3, Revision 7.01 (ANSI INCITS 348-2001) FC-GS-4, Revision 7.91 (ANSI INCITS 387-2004) FC-GS-5, Revision 8.51 (ANSI INCITS 427-2007) FC-GS-6, Revision 9.4 (ANSI INCITS 463-2010) FCP, Revision 12 (ANSI INCITS 269-1996) FCP-2, Revision 8 (ANSI INCITS 350-2003) FCP-3, Revision 4 (ANSI INCITS 416-2006) FCP-4, Revision 2 FC-SB-2, Revision 2.1 (ANSI INCITS 349-2001) FC-SB-3, Revision 1.6 (ANSI INCITS 374-2003) FC-SB-3, Amendment 1 (ANSI INCITS 374-2003/AM1-2007) FC-SB-4, Revision 3.0 (ANSI INCITS 466-2011) FC-BB-2, Revision 6.0 (ANSI INCITS 372-2003) FC-BB-3, Revision 6.8 (ANSI INCITS 414-2006) FC-BB-4, Revision 2.7 (ANSI INCITS 419-2008) FC-BB-5, Revision 2.0 (ANSI INCITS 462-2010) FC-VI, Revision 1.84 (ANSI INCITS 357-2002) FC-SP, Revision 1.8 (ANSI INCITS 426-2007) FAIS, Revision 1.03 (ANSI INCITS 432-2007) FAIS-2, Revision 2.23 (ANSI INCITS 449-2008) FC-IFR, Revision 1.06 (ANSI INCITS 475-2011) FC-FLA, Revision 2.7 (INCITS TR-20-1998) FC-PLDA, Revision 2.1 (INCITS TR-19-1998)

Page 10 of 19

Feature

Description FC-Tape, Revision 1.17 (INCITS TR-24-1999) FC-MI, Revision 1.92 (INCITS TR-30-2002) FC-MI-2, Revision 2.6 (INCITS TR-39-2005)
FC-DA, Revision 3.1 (INCITS TR-36-2004)Class of service: Class 2, Class 3, and Class F Fibre Channel standard port types: E, F, FL, and B Fibre Channel enhanced port types: SD, ST, and TE IP over Fibre Channel (RFC 2625) Protocols (continued) IPv6, IPv4, and Address Resolution Protocol (ARP) over Fibre Channel (RFC 4338) Extensive IETF-standards based TCP/IP, SNMPv3, and remote monitoring (RMON) MIBs IP standards RFC 791 IPv4 RFC 793 and 1323 TCP RFC 894 IP/Ethernet RFC 1041 IP/802 RFC 792, 950, and 1256 ICMP RFC 1323 TCP performance enhancements RFC 2338 VRRP RFC 2460 and 4291 IPv6 RFC 2463 and 4443 ICMPv6 RFC 2461 and 2462 IPv6 neighbor discovery and stateless autoconfiguration RFC 2464 IPv6/Ethernet RFC 3270 and 3980 iSCSI
RFC 3643 and 3821 FCIP Ethernet standards

Cards, ports, and slots

Base (fixed slot): 18 fixed autosensing 1/2/4-Gbps Fibre Channel ports and 4 fixed 1-Gbps Ethernet ports Expansion slot: 1 empty expansion slot with support for the following: Cisco 4/44-Port 8/4-Gbps Host-Optimized Fibre Channel Switching Module Cisco MDS 9000 4-Port 10-Gbps Fibre Channel Switching Module Cisco MDS 9000 16-Port Storage Services Node (SSN)
Features and Functions Fabric services Name server Internet Storage Name Server (iSNS) Registered State Change Notification (RSCN) Login services Fabric Configuration Server (FCS) Public loop Broadcast In-order delivery Advanced functions VSAN IVR PortChannel with multipath load balancing Flow-based and zone-based QoS FCIP tape read and write acceleration FICON over FCIP tape read and write acceleration (pipelining) FICON XRC (z/OS Global Mirror) acceleration Cisco SME for tape, virtual tape, and disk

IEEE Std 802.3-2005 Ethernet IEEE Std 802.1Q-2005 VLAN IPsec RFC 2401 and 4301 security architecture for IP RFC 2403 and 2404 HMAC RFC 2405, 2406, 2451, and 4303 IP ESP RFC 2407 and 2408 ISAKMP RFC 2412 OAKLEY Key Determination Protocol RFC 3566, 3602, and 3686 AES Internet Key Exchange (IKE) RFC 2409 IKEv1 RFC 4306 IKEv2

Page 11 of 19

Feature Diagnostics and troubleshooting tools
Description POST diagnostics Online diagnostics Internal port loopbacks SPAN and Remote SPAN (RSPAN) Fibre Channel traceroute Fibre Channel ping Fibre Channel debug Cisco Fabric Analyzer Syslog Online system health Port-level statistics Real-Time Protocol (RTP) debug

Network security

VSANs ACLs Per-VSAN RBAC Fibre Channel zoning N-port worldwide name (WWN) N-port FC-ID Fx-port WWN Fx-port WWN and interface index Fx-port domain ID and interface index Fx-port domain ID and port number iSCSI zoning iSCSI name IP address FC-SP DH-CHAP switch-to-switch authentication DH-CHAP host-to-switch authentication Port security and fabric binding IPsec for FCIP and iSCSI IKEv1 and IKEv2 Management access SSHv2 implementing AES SNMPv3 implementing AES SFTP
FC-SB-3 compliant Cascaded FICON fabrics Intermix of FICON and Fibre Channel Protocol traffic CUP management interface

Serviceability

Configuration file management ISSU for Fibre Channel interfaces Call home Power-management LEDs Port beaconing System LED SNMP traps for alerts Network boot

Performance

Port speed: 1/2/4-Gbps autosensing, optionally configurable Buffer credits: 16 per port (shared-mode ports), up to 250 per port (dedicated-mode ports), and up to 4095 on an individual port (dedicated-mode ports with optional Cisco MDS 9000 Enterprise package license activated) Ports per chassis: 18 to 66 Fibre Channel ports and up to 20 Gigabit Ethernet ports Ports per rack: Up to 980 PortChannel: Up to 16 physical links FCIP tunnels: Up to 3 per port

Page 12 of 19

Description Speed Media 50/125-micron multimode (OM3) 50/125-micron multimode 62.5/125-micron multimode 9/125-micron single mode 50/125-micron multimode (OM3) 50/125-micron multimode 62.5/125-micron multimode 9/125-micron single mode 50/125-micron multimode (OM3) 50/125-micron multimode 62.5/125-micron multimode 9/125-micron single mode 9/125-micron single mode 50/125-micron multimode (OM3) 50/125-micron multimode (OM2) 62.5/125-micron multimode 9/125-micron single mode 50/125-micron multimode (OM3) 50/125-micron multimode (OM2) 62.5/125-micron multimode 9/125-micron single mode 50/125-micron multimode (OM3) 50/125-micron multimode (OM2) 62.5/125-micron multimode 9/125-micron single mode 9/125-micron single mode Distance 860m 500m 300m 10 km 500m 300m 150m 10 km 380m 150m 70m 4 km 10 km 500m 300m 150m 10km 380m 150m 70m 10km 150m 50m 21m 10km Up to 25 km (40 km in point-topoint application)

Supported Cisco optics, media, and transmission distances (4-Gbps optics modules)
1-Gbps SW, LC SFP 1-Gbps SW, LC SFP 1-Gbps SW, LC SFP 1-Gbps LW, LC SFP 2-Gbps SW, LC SFP 2-Gbps SW, LC SFP 2-Gbps SW, LC SFP 2-Gbps LW, LC SFP 4-Gbps SW, LC SFP 4-Gbps SW, LC SFP 4-Gbps SW, LC SFP 4-Gbps MR, LC SFP 4-Gbps LW, LC SFP
Supported Cisco optics, media, and transmission distances (8-Gbps optics modules, supported on 4/44-Port Host Optimized 8G Fibre Channel Module only)
2-Gbps SW, LC SFP 2-Gbps SW, LC SFP 2-Gbps SW, LC SFP 2-Gbps LW, LC SFP 4-Gbps SW, LC SFP 4-Gbps SW, LC SFP 4-Gbps SW, LC SFP 4-Gbps LW, LC SFP 8-Gbps SW, LC SFP 8-Gbps SW, LC SFP 8-Gbps SW, LC SFP 8-Gbps LW, LC SFP
Supported Cisco optics, media, and transmission distances (4-Gbps coarse wavelengthdivision multiplexing [CWDM] optics modules) Supported Cisco optics, media, and transmission distances (Ethernet transceivers for Gigabit Ethernet ports) Supported Cisco optics, media, and transmission distances (2-Gbps CWDM optics modules) Supported Cisco optics, media, and transmission distances (2-Gbps dense wavelengthdivision multiplexing [DWDM] optics modules) Supported Cisco optics, media, and transmission distances (10-Gbps optics modules supported for Cisco MDS 9000 4-Port 10-Gbps Fibre Channel Switching Module only)

4-Gbps CWDM, LC SFP

1-Gbps SX, LC SFP 1-Gbps SX, LC SFP 1-Gbps LX/LH, LC SFP
50/125-micron multimode 62.5/125 micron multimode 9/125 or 10/125 micron single mode 9/125-micron single mode 9/125-micron single mode

550m 275m 10km

1-Gbps CWDM, LC SFP 2-Gbps CWDM, LC SFP
Up to 100 km Up to 100 km
1-Gbps DWDM, LC SFP 2-Gbps DWDM, LC SFP
9/125-micron single mode 9/125-micron single mode
Up to 200 km Up to 200 km
10-Gbps SR, SC X2 10-Gbps SR, SC X2 10-Gbps LR, SC X2 10-Gbps ER, SC X2
50/125-micron multimode (OM3) 62.5/125-micron multimode 9/125-micron single mode 9/125-micron single mode

300m 33m 10 km 40 km

Page 13 of 19
Feature Reliability and availability
Description ISSU Hot-swappable, 1+1 redundant power supplies Hot-swappable fan tray with integrated temperature and power management Hot-swappable Small Form-Factor Pluggable (SFP) optics Hot-swappable switching module Passive backplane Stateful process restart Any module and any port configuration for PortChannels Fabric-based multipathing Per-VSAN fabric services Port tracking VRRP for management and FCIP or iSCSI connections Online diagnostics

Network management

Access methods Out-of-band 10/100 Ethernet port RS-232 serial console port In-band IP over Fibre Channel DB-9 COM port In-band FICON CUP over Fibre Channel Access protocols CLI using the console and Ethernet ports SNMPv3 using the Ethernet port and in-band IP over Fibre Channel access Storage Networking Industry Association (SNIA) Storage Management Initiative Specification (SMI-S) FICON CUP Distributed Device Alias service Network security Per-VSAN RBAC using RADIUS and TACACS+-based authentication, authorization, and accounting (AAA) functions SFTP SSHv2 implementing AES SNMPv3 implementing AES Management applications Cisco MDS 9000 Family CLI Cisco DCNM for SAN Essentials Edition Cisco DCNM for SAN Advanced Edition (optional software license) Cisco Device Manager CiscoWorks Resource Manager Essentials (RME) and Device Fault Manager (DFM)

Programming interfaces

Scriptable CLI Cisco DCNM web services API Cisco Device Manager GUI

Environmental

Temperature, ambient operating: 32 to 104 (0 to F C) Temperature, ambient nonoperating and storage: 40 to 158 (-40 to 75 F C) Relative humidity, ambient (noncondensing) operating: 10 to 90% Relative humidity, ambient (noncondensing) nonoperating and storage: 10 to 95% Altitude, operating: -197 to 6500 ft (-60 to 2000m)

Physical dimensions

Dimensions (H x W x D): 5.25 x 17.32 x 22.66 in. (13.34 x 43.99 x 57.56 cm), 3RUs; all units rack mountable in standard 19-inch Electronic Industries Alliance [EIA] rack) Weight of fully configured chassis with optional switching module: 62 lb (28.2 kg) Power supply: 845W AC Power Cord: notched C15 female connector mating to C16 male socket on power supply AC input characteristics 100 to 240V AC (10% range) 50 to 60 Hz (nominal) Airflow (side to side) 200 linear feet per minute (LFM) through system fan assembly Cisco recommends maintaining a minimum air space of 2.5 in. (6.4 cm) between walls and chassis air vents and a minimum horizontal separation of 6 in. (15.2 cm) between two chassis to prevent overheating

Power and cooling

DS-SCR-K9= DS-SC-K9= CAB-9K10A-AR= CAB-9K10A-AU= CAB-9K10A-CH= CAB-9K10A-EU= CAB-9K10A-ISR= CAB-9K10A-IT= CAB-9K10A-KOR= CAB-9K10A-SA= CAB-9K10A-SW= CAB-9K10A-TWN= CAB-9K10A-UK= CAB-9K12A-NA= CAB-C15-CBN= DS-9200-KIT-CCO= DS-9200-KIT-DM= DS-9200-KIT-EMC= DS-9200-KIT-HDS= DS-9200-KIT-HP= DS-9200-KIT-IBM= DS-9200-KIT-SUN= M9200ENT1K9= DCNM-SAN-M92-K9= DCNM-SAN-PAK= L-DCNM-S-M92-K9= L-DCNM-S-PAK= M9200FIC1K9= M9200XRC= M9200EXT1AK9=

Page 17 of 19

Part Number M92EXTSSNK9= M9222iSSE1K9= M9200SSE184K9= M9200SSE1K9= M9222IIOA= M92IOA184= M92IOASSN= M9200SME1FK9= M9200SME1MK9= M92SMESSNK9= M9222IDMMK9= M92DMM184K9=
Description Cisco MDS 9200 SAN Extension over IP Package (1 engine) for the 16-Port Storage Services Node (SSN-16) module in expansion slot, spare Cisco MDS 9200 Storage Services Enabler Package for the Cisco MDS 9222i Multiservice Modular Switch fixed slot, spare Cisco MDS 9200 Storage Services Enabler Package for the Cisco MDS 9000 Family MSM-18/4 in expansion slot, spare Cisco MDS 9200 Storage Services Enabler Package for the End-of-Life Cisco MDS 9000 Family Storage Services Module (SSM) in expansion slot, spare Cisco MDS 9200 I/O Accelerator Services License for the Cisco MDS 9222i Multiservice Modular Switch fixed slot, spare Cisco MDS 9200 I/O Accelerator Services License for MSM-18/4 in expansion slot, spare Cisco MDS 9200 I/O Accelerator Services License (1 engine) for the SSN-16 in expansion slot, spare Cisco MDS 9200 Storage Media Encryption Package for Cisco MDS 9222i Multiservice Modular Switch fixed slot, spare Cisco MDS 9200 Storage Media Encryption Package for 18/4-Port Multiservice Module in expansion slot, spare Cisco MDS 9200 Storage Media Encryption Package for SSN-16 (1 engine) in expansion slot, spare Cisco MDS 9200 Data Mobility Manager (DMM) License for the Cisco MDS 9222i Multiservice Modular Switch fixed slot, spare Cisco MDS 9200 Data Mobility Manager (DMM) License for 18/4-port Multiservice Module in expansion slot, spare
Note 1: For detailed information about all supported transceivers, see Cisco MDS 9000 Family pluggable transceivers. Note 2: For detailed information about the optional Cisco MDS 9000 Family Enterprise Package Software and the Cisco DCNM software, see http://www.cisco.com/en/US/prod/collateral/ps4159/ps6409/ps6029/product_data_sheet09186a00801ca6ac.html and http://www.cisco.com/go/dcnm, respectively. Note 3: Bundled and configure-to-order optical transceivers are shipped in the box with the product unit, but are not installed in the port cages on the unit. Spares ship separately. Note 4: License documentation ships with switch unit in Accessory Kit for customer installation on switch. Note 5: License documentation ships with switch unit in Accessory Kit for customer installation on management server. Note 6: Cisco DCNM for SAN Advanced Edition Configurable Packs have additional Configure-To-Order Part Numbers not shown here which are detailed in the Cisco Dynamic Configuration Tool.

Service and Support

Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, see Cisco Technical Support Services or Cisco Advanced Services.

For More Information

For more information about the Cisco MDS 9222i, visit http://www.cisco.com/en/US/products/hw/ps4159/ps4358/index.html or contact your local account representative.

Page 18 of 19

Printed in USA

C78-416859-07

Page 19 of 19

 

Technical specifications

Full description

The Cisco MDS 9222i Multiservice Modular Fabric Switch brings flexible, high performance Storage Area Network (SAN) solutions usually reserved for director class switches, to the department or remote branch office level. This "all-in-one-box solution" provides eighteen 4-Gbps Fiber Channel ports and four 1-Gbps Ethernet IP storage services ports in the base unit, plus an open slot for modular expansion. The MDS 9222i Fabric Switch is capable of expanding up to 66 Fiber Channel ports with an optional 48 port 4-Gbps module and shares a consistent architecture with the MDS 9500 Series Multilayer Directors and allows modules to be moved between all 92xx and 95xx series switches. The MDS 9222i is backward compatible and future ready with all MDS 9000 modules providing outstanding investment protection. Integrating Fiber Channel 2, 4 and 10Gb technology and IP Storage Services for iSCSI and FC over IP and other intelligent fabric applications services into a single system allows maximum flexibility for user configurations. High availability features including redundant power supplies and fans, stateful process restart, and In Service Software upgrade provides exceptional uptime performance for your Storage Area Network. Using hardware-based compression, the MDS 9222i allows immediate savings on WAN infrastructure bandwidth utilization and backup performance.

General
Device TypeSwitch - 18 ports
Enclosure TypeRack-mountable - 3U
Ports18 x 4Gb Fibre Channel + 4 x SFP
Fibre ChannelFC-AL, FC-AL-2, FC-BB, FC-FG, FC-FLA, FC-FS, FC-GS-2, FC-GS-3, FC-MI, FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-PLDA, FC-SB-2, FC-SB-3, FC-SW-2, FC-SW-3, FC-Tape, FC-VI, FC-BB-2, FCP, FCP-2
Remote Management ProtocolTelnet, SNMP 3
Authentication MethodRADIUS, TACACS+, Secure Shell v.2 (SSH2)
FeaturesModular design, auto-sensing per device
Expansion / Connectivity
Interfaces1 x 10Base-T/100Base-TX - RJ-45 - management 1 x console - management 22 x SFP (mini-GBIC)
Expansion Slots Total (Free)2 ( 1 ) x expansion slot
Installed Modules Qty (Max)1 (installed) / 2 (max)
Power
Power DevicePower supply - hot-plug / redundant - plug-in module
Installed Qty2 (installed) / 2 (max)
Voltage RequiredAC 120/230 V ( 50/60 Hz )
Miscellaneous
Width17.3 in
Depth22.7 in
Height5.2 in
Weight62.2 lbs
Compliant StandardsNEBS level 3, FCC Class A certified, ETSI, CISPR 22 Class A, CISPR 24, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, EN50082-1, EN 61000-6-1, ICES-003 Class A, FCC CFR47 Part 15, EN300-386, FCC CFR21 Part 1040, UL 60950-1, IEC 60950-1, EN 60950-1
Manufacturer Warranty
Service & Support2 years warranty
Service & Support DetailsLimited warranty - 2 years
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature104 °F
Humidity Range Operating10 - 90%
Universal Product Identifiers
BrandHewlett-Packard
Part NumberAG851B

 

Tags

SC-HT535 MEC 1A PSR-530 M-J510 Ellipse 605 GFA-6000 VKM400AMS LC240CP VCE-240 99G-99G- AV-pack-105 RCM 104 S10 1999 264-1 DV-L5 VGN-CR29xn-B FST-ZX80D LE46C650l1W T 2406 DVP-NS700V CMT-HX80R WF-T502C Dynacord MP7 Fireport 1394 DTH231 Singer 241 DSR9500 Dvdr3595H-31 3 PRO KX-T7533NE Hipath 1190 X342N G-scribe RX-DT75 HS8040 27-KC Perfection 1270 576 VT MCM277 12 C20SX Kodak C533 P2500 SD-240E V5 5 LAC-M2500 Suite 10 Story Diamond2 ERA-G100 Philips FW30 KX-TG8321RU DTB-S500F Mitsubishi FTO Logicom L470 Nokia 8850 GV-HIA5 HTS5220 Recettes KRC-858W KAC-7251 E-300 GT-30000 TU-CTH100 CCD-TR512E Nokia 5250 A8N-sli SE IC-R2 25HP-2005 LE40C650 Scales AQ07A1ME Logitech G51 Vwbn1 0 16V WF-T502A Dynax 5 FOR Xbox Dbtel 6668 HT-SS360 Lavw1451 Dab-radio IC-M700PRO A7PRO 67GHZ MP9000 Animation 5 SV-DVD1 LN26B450c4 EPC14CA Evolution 4 DSC-W150 B 32LB220B4U NVD-U12E 327RC FW545C PCV-V1-F Review Aspire-T630 CLP-320 Dinosaur Digs 42PF5421

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101