Reviews & Opinions
Independent and trusted. Read before buy HP Compaq Presario 6600!

HP Compaq Presario 6600

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
HP Compaq Presario 6600 - Compaq Presario Easy Access Wireless Keyboard, Mouse AND Receiver Installation G Laptop & Notebook, size: 292 KB
Related manuals
HP Compaq Presario 6600 Installing THE Optical Wireless Mouse SET
HP Compaq Presario 6600 Installing THE Wireless Keyboard And Mouse SET
HP Compaq Presario 6600 Support Telephone Numbers

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

HP Compaq Presario 6600Compaq Battery for HP/Compaq Presario X6000 6600 mAh DENAQ
Cell Count: 12 Capacity: 6600mAh Compatible Parts: 383963-001 - HSTNN-DB02-12 - HSTNN-DB03-12 - HSTNN-DB04-12 - HSTNN-DB14-12 - HSTNN-IB03-12 - HSTNN-IB04-12 - HSTNN-IB14-12 - HSTNN-Q08C-12

Details
Brand: Compaq
Part Number: DQ-DP390A-12(tmp-key-1028)
UPC: 814352021282

 

[ Report abuse or wrong photo | Share your HP Compaq Presario 6600 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 5. Page 1 of 1. Average Rating:
vulpeso 7:44am on Monday, October 18th, 2010 
compaq laptop has been issued with a very complete feature for students and entrepreneurs who have mobility rate is very high and requires technology ...
donis12 1:47pm on Friday, September 10th, 2010 
Stoped working at day 2... ...and now HP cant help me because I am not at the US and this is a US excluve model.
Splatcat 9:07pm on Tuesday, August 3rd, 2010 
I bought this laptop for my mum and here is what she thought of it: this is a nice laptop and seems to be good value for money with its specifications; there is one problem which I am still trying to figure out and tha...
Molder99asw 9:36pm on Wednesday, July 21st, 2010 
This was significantly cheaper through ASDA and I collected it from a nearby store, which was handy. The only downsides - no MS Office.
gordanam 1:13am on Saturday, July 17th, 2010 
First know that I am what may considered a professional with computers. I am an XP fan.. never owned a system with Vista and never will.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

*This table describes factory settings. For information about changing factory settings, refer to the user guides located in Help and Support.
Item (1) (2) (3) (4) (5) (6) (7)
Component esc key fn key Windows logo key Windows applications key Embedded numeric keypad keys num lock key Function keys
Function Displays system information when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with a function key or the esc key. Displays the Windows Start menu. Displays a shortcut menu for items beneath the pointer. Can be used like the keys on an external numeric keypad. Enables numeric lock, turns on the embedded numeric keypad, and turns on the num lock light. Execute frequently used system functions when pressed in combination with the fn key.

Lights

Component Power lights (2)*
Description On: The computer is on. Blinking: The computer is in the Sleep state. Off: The computer is off or in Hibernation. On: A battery is charging. Blinking: A battery that is the only available power source has reached a low battery level or a critical battery level. Off: If the computer is plugged into an external power source, the light is turned off when all batteries in the computer are fully charged. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low battery level.

Battery light

(3) (4) (5)
Drive light Caps lock light Volume mute light
Blinking: The hard drive or optical drive is being accessed. On: Caps lock is on. Blue: Computer sound is turned on. Amber: Computer sound is turned off.

(6) (7) (8)

Volume down light Volume up light Num lock light
Blinking: The volume scroll zone is being used to decrease speaker volume. Blinking: The volume scroll zone is being used to increase speaker volume. On: Num lock is on or the embedded numeric keypad is enabled.
*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The power light on the front of the computer is visible whether the computer is open or closed.

TouchPad

Component TouchPad light
Function Blue: TouchPad is enabled. Amber: TouchPad is disabled.

(2) (3) (4) (5) (6) (7)

TouchPad* TouchPad horizontal scroll zone Left TouchPad button* TouchPad on/off button TouchPad vertical scroll zone Right TouchPad button*
Moves the pointer and selects or activates items on the screen. Scrolls left or right. Functions like the left button on an external mouse. Enables/disables the TouchPad. Scrolls up or down. Functions like the right button on an external mouse.
*This table describes factory settings. To view or change pointing device preferences, select Start > Control Panel > Hardware and Sound > Mouse.

Mass storage devices

Description Hard drives (include hard drive bracket) 250-GB, 5400-rpm 200-GB, 4200-rpm 160-GB, 5400-rpm 120-GB, 5400-rpm 80-GB, 5400-rpm 60-GB, 5400-rpm
453775-001 451863-001 451862-001 446498-001 446497-001 446496-001
Optical drives (include bezel and bracket) For use in computer models with Intel processors: Blu-ray Disc ROM Drive with SuperMulti DVDR/RW Double-Layer (DL) support DVDRW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe DVDRW and CD-RW SuperMulti Double-Layer Combo Drive DVD/CD-RW Combo Drive 462453001 446501-001 446500-001 446499-001
For use in computer models with AMD processors: DVDRW and CD-RW SuperMulti Double-Layer Combo Drive DVDRW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe DVD/CD-RW Combo Drive 449934-001 449936-001 455076-01

Miscellaneous parts

Description AC adapters 90-W non-PFC AC adapter 90-W PFC AC adapter 65-W non-PFC AC adapter 65-W PFC AC adapter ATSC/NTSC TV tuner antenna ATSC/NTSC/PAL TV tuner Composite video cable DVB-T tuner DVB-T wireless antenna adapter ExpressCard Kit (includes software CD) HP backpack HP carrying case HP Remote Control Infrared emitter with cable Label Kit for computer models with Intel processors Label Kit for computer models with AMD processors Optical wired mouse RF input adapter cable (without ferrite) USB digital drive Windows Vista remote control (fits inside ExpressCard slot) Windows Vista remote control (does not fit inside ExpressCard slot) Wired headset Wireless laser mouse with cable adapter Power cords: Australia and New Zealand Belgium, Europe, Finland, France, Germany, Greece, the Netherlands, Norway, Portugal, Spain, and Sweden Canada, French Canada, Latin America, Thailand, and the United States Denmark India Israel Italy 394279-011 394279-021 394279-001 394279-081 394279-D61 394279-BB1 394279-061 432309-001 453198-001 402018-001 453199-001 439131-001 439130-001 407939-001 412175-001 412176-001 445170-001 405527-001 418162-001 435743-001 439129-001 446525-001 449972-001 436238-001 407940-001 364727-002 439128-001 439254-001 371693-001 430958-001 Spare part number
Description Japan South Korea The People's Republic of China Switzerland Taiwan The United Kingdom and Hong Kong Screw Kit (see Screw listing on page 101 for more Screw Kit information) Hex HM5.09.0 standoff Phillips PM3.03.0 screw Phillips PM2.510.0 screw Phillips PM2.57.0 screw Phillips PM2.55.0 captive screw Phillips PM2.54.0 captive screw Phillips PM2.54.0 screw Phillips PM2.53.0 screw Phillips PM2.07.0 screw Phillips PM2.05.0 captive screw Phillips PM2.03.0 screw Phillips PM2.02.0 screw

Remove the memory module: 1. Loosen the three Phillips PM2.05.0 screws (1) that secure the memory/WLAN module compartment cover to the computer.
Lift the left side of the cover (2), swing it to the right, and remove the cover.
Remove the memory/WLAN module compartment cover. NOTE: The memory/WLAN module compartment cover is included in the Plastics Kit, spare part number 438669-001.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) Remove the module (2) by pulling it away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the memory module slot.
Reverse this procedure to install a memory module.

RTC battery

NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords and CMOS settings to be cleared.
Description RTC battery (includes 2-sided tape) Spare part number 446518-001 and 449729-001
Before removing the RTC battery, follow these steps: 1. 2. 3. 4. 5. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 41). Remove the memory/WLAN module compartment cover (see Memory module on page 44).
Remove the RTC battery: 1. 2. Disconnect the RTC battery cable (1) from the system board. Remove the RTC battery (2). NOTE: The RTC battery is secured to the computer by 2-sided tape. All replacement RTC battery spare part kits include 2-sided tape.
Reverse this procedure to install the RTC battery.

WLAN module

Description Intel 802.11a/b/g/n WLAN modules: For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, the United States, Uruguay, Venezuela, and Vietnam For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania, Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South Korea For use in Japan For use in South Korea 441086-001 Spare part number

Before removing the optical drive, follow these steps: 1. 2. 3. 4. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 41).
Remove the optical drive: 1. 2. 3. 4. Position the computer with right side toward you. Remove the Phillips PM2.57.0 screw (1) that secures the optical drive to the computer. Insert a thin tool, such as a paper clip (2), into the disc tray release access. (The optical drive disc tray is partially ejected from the optical drive.) Use the disc tray frame to slide the optical drive (3) out of the computer.
Remove the optical drive.

6. 7. 8.

If it is necessary to replace the optical drive bracket, position the optical drive with the optical drive bracket toward you. Remove the two Phillips PM2.03.0 screws (1) that secure the optical drive bracket to the optical drive. Remove the optical drive bracket (2).
Reverse the above procedure to reassemble and install the optical drive.

Switch cover

Description Switch cover for use in full-featured computer models (includes LED board and cable) Switch cover for use in defeatured computer models (includes LED board and cable) Spare part number 431425-001 and 451010-001 455260-001
Before removing the switch cover, follow these steps: 1. 2. 3. 4. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 41).
Remove the switch cover: 1. Remove the two Phillips PM2.510.0 screws (1) and the Phillips PM2.54.0 screw (2) that secure the switch cover to the computer.
Turn the computer display-side up, with the front toward you. Open the computer as far as possible.
Lift the rear edge of the switch cover and swing it forward until it rests on the keyboard.

CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 4. Remove the four Phillips PM2.57.0 screws (1) that secure the display assembly to the computer.
Remove the display assembly (2).
If it is necessary to replace the display bezel or any of the display assembly internal components, remove the following screw covers: (1) Four covers on the top edge of the bezel (2) Two covers on the lower bezel edges (3) Two covers on the lower-inside edge of the bezel The display rubber screw covers are included in the Display Screw Kit, spare part number 431400-001.
Remove the eight Phillips PM2.57.0 screws that secure the display bezel to the display assembly.
Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display bezel until the bezel disengages from the display enclosure. Remove the display bezel (3). The display bezels are available using spare part numbers 433283-001 and 453328-001 for models with Intel processors, and 433284-002 for full-featured models with AMD processors.
10. If it is necessary to replace the display inverter, remove the inverter (1) from the display enclosure as far as the display panel cable and the backlight cable allow.
11. Disconnect the display panel cable (2) and the backlight cable (3) from the inverter.
12. Remove the display inverter. The display inverter is available using spare part number 431391-001. 13. If it is necessary to replace the display panel, remove the four Phillips PM2.54.0 screws (1) that secure the display panel to the display enclosure. 14. Remove the display panel (2). The display panel is available using spare part number 446480-001.
15. If it is necessary to replace the display hinges, remove the two Phillips PM2.03.0 screws (1) that secure each display hinge to the display panel.
16. Remove the display hinges (2). The display hinges are available using spare part number 433288-001.
17. If it is necessary to replace the wireless antenna transceivers and cables, remove the Phillips PM2.03.0 screw (1) that secures each transceiver to the display enclosure. 18. Release the retention tabs (2) built into the display enclosure that secure the wireless antenna cables and remove the cables from the tabs. 19. Detach the wireless antenna transceivers (3) from the display enclosure. The wireless antenna transceivers and cables are available using spare part numbers 449728-001 (for use only with computer models equipped with an 802.11a/b/g/n WLAN module) and 449726-001 (for use only with computer models equipped with an 802.11a/b/g or 802.11b/g WLAN module).
20. Remove the wireless antenna transceivers and cables. 21. If it is necessary to replace the microphones and cables, release the retention tabs (1) built into the display enclosure that secure the microphone cables to the display enclosure. 22. Remove the microphone receivers (2) from the clips in the display enclosure.

23. Remove the microphone cables (3) from the display enclosure. The microphones and cables are available using spare part number 431393-001.
Reverse this procedure to reassemble and install the display assembly.

Top cover

Description Top cover for use with computer models with Intel processors (includes speakers and TouchPad and cable) Top cover for use in computer models with AMD processors: Full-featured models Defeatured models 454170-001 451407-001 Spare part number 446510-001 and 455514001
Before removing the top cover, follow these steps: 1. 2. 3. 4. 5. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 41). Remove the following components: a. b. c. d. e. Hard drive (see Hard drive on page 42) Optical drive (see Optical drive on page 50) Switch cover (see Switch cover on page 52) Keyboard (see Keyboard on page 54) Display assembly (see Display assembly on page 58)
Remove the top cover: 1. 2. Turn the computer upside down, with the front toward you. Remove the nine Phillips PM2.57.0 screws that secure the top cover to the computer.
Remove the following screws: (1) Three Phillips PM2.53.0 screws (2) Six Phillips PM2.54.0 screws (3) Two Hex HM5.09.0 screw locks
Turn the computer right-side up, with the front toward you. Release the ZIF cable (1) to which the TouchPad cable is connected, and disconnect the TouchPad cable (2).
Remove the two Phillips PM2.57.0 screws (1) and the two Phillips PM2.54.0 screws (2) that secure the top cover to the base enclosure.
Lift the front edge of the top cover (1) until it disengages from the computer. Remove the top cover (2).
Reverse this procedure to install the top cover.

Bluetooth module

Description Bluetooth module (includes Bluetooth module cable) Spare part number 412766-002

Remove the audio board: 1. 2. Remove the two Phillips PM2.54.0 screws (1) that secure the audio board to the computer. Release the audio board (2) by sliding it back to disengage the audio connectors from the base enclosure.
Remove the audio board (3) by lifting it straight up.
Reverse this procedure to install the audio board.

Fan/heat sink assembly

Description Fan/heat sink assembly for use in computer models with Intel processors (includes thermal material) Fan/heat sink assembly for use in computer models with AMD processors (includes thermal material) Spare part number 446522-001 449961-001
NOTE: When replacing the fan/heat sink assembly, be sure that the power button board is removed from the defective fan/heat sink assembly and installed on the replacement fan/heat sink assembly. See Power button board on page 56 for power button board removal information. NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the right side and rear panel of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software applications. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Before removing the fan/heat sink assembly, follow these steps: 1. 2. 3. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
Remove the battery (see Battery on page 41). Remove the following components: a. b. c. d. e. f. g. h. i. Hard drive (see Hard drive on page 42) Optical drive (see Optical drive on page 50) Switch cover (see Switch cover on page 52) Keyboard (see Keyboard on page 54) Display assembly (see Display assembly on page 58) Top cover (see Top cover on page 64) Audio board (see Audio board on page 74) USB/power connector board (see USB/power connector board on page 70) System board (see System board on page 71)

Remove the battery (see Battery on page 41). Remove the following components: a. b. c. d. e. f. g. h. i. j. Hard drive (see Hard drive on page 42) Optical drive (see Optical drive on page 50) Switch cover (see Switch cover on page 52) Keyboard (see Keyboard on page 54) Display assembly (see Display assembly on page 58) Top cover (see Top cover on page 64) Audio board (see Audio board on page 74) USB/power connector board (see USB/power connector board on page 70) System board (see System board on page 71) Fan/heat sink assembly (see Fan/heat sink assembly on page 75)
Remove the processor: 1. 2. Turn the processor locking screw (1) one-half turn counterclockwise until you hear a click. Lift the processor (2) straight up and remove it. NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.

Setup Utility

Starting the Setup Utility
The Setup Utility is a ROM-based information and customization utility that can be used even when your Windows operating system is not working or will not load. NOTE: The fingerprint reader (select models only) does not work when accessing the Setup Utility. The utility reports information about the computer and provides settings for startup, security, and other preferences. To start the Setup Utility: 1. 2. Turn on or restart the computer. Before Windows opens and while Press <F10> to enter setup is displayed in the lower-left corner of the screen, press f10.

Chapter 5 Setup Utility

Using the Setup Utility
Changing the language of the Setup Utility
The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. 1. 2. 3. 4. 5. To start the Setup Utility, turn on or restart the computer, and then press f10 while Press <F10> to enter setup is displayed in the lower-left corner of the screen. Use the arrow keys to select System Configuration > Language, and then press enter. Press f5 or f6 (or use the arrow keys) to select a language, and then press enter to select a language. When a confirmation prompt with your preference selected is displayed, press enter to save your preference. To set your preferences and exit the Setup Utility, press f10 and then follow the instructions on the screen.
Your preferences go into effect when the computer restarts in Windows.
Navigating and selecting in the Setup Utility
Because the Setup Utility is not Windows-based, it does not support the TouchPad. Navigation and selection are by keystroke. To choose a menu or a menu item, use the arrow keys. To choose an item in a drop-down list or to toggle a field, for example an Enable/Disable field, use either the arrow keys or f5 or f6. To select an item, press enter. To close a text box or return to the menu display, press esc. To display additional navigation and selection information while the Setup Utility is open, press f1.

Displaying system information
The following procedure explains how to display system information in the Setup Utility. If the Setup Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2. 1. 2. 3. To start the Setup Utility, turn on or restart the computer, and then press f10 while Press <F10> to enter setup is displayed in the lower-left corner of the screen. Access the system information by using the Main menu. To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit Discarding Changes, and then press enter. (The computer restarts in Windows.)
Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. 1. 2. 3. 4. To start the Setup Utility, turn on or restart the computer, and then press f10 while Press <F10> to enter setup is displayed in the lower-left corner of the screen. Select Exit > Load Setup Defaults, and then press enter. When the Setup Confirmation is displayed, press enter to save your preferences. To set your preferences and exit the Setup Utility, press f10, and then follow the instructions on the screen.
The Setup Utility default settings are set when you exit the Setup Utility and go into effect when the computer restarts. NOTE: Your password, security, and language settings are not changed when you restore the factory default settings.
Using advanced Setup Utility features
This guide describes the Setup Utility features recommended for all users. For more information about the Setup Utility features recommended for advanced users only, refer to Help and Support, which is accessible only when the computer is in Windows. The Setup Utility features available for advanced users include a hard drive self-test, a Network Service Boot, and settings for boot order preferences. The <F12> to boot from LAN message that is displayed in the lower-left corner of the screen each time the computer is started or restarted in Windows is the prompt for a Network Service Boot. The Press <F9> to change boot order message that is displayed in the lower-left corner of the screen each time the computer is started or restarted in Windows is the prompt to change the boot order.
Closing the Setup Utility
You can close the Setup Utility with or without saving changes. To close the Setup Utility and save your changes from the current session, use either of the following procedures: Press f10, and then follow the instructions on the screen. or If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to select Exit > Exit Saving Changes, and then press enter. When you use the f10 procedure, you are offered an option to return to the Setup Utility. When you use the Exit Saving Changes procedure, the Setup Utility closes when you press enter. To close the Setup Utility without saving your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to select Exit > Exit Discarding Changes, and then press enter. After the Setup Utility closes, the computer restarts in Windows.

Setup Utility menus

The menu tables in this section provide an overview of Setup Utility options. NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by your computer.

Main menu

Select System information To Do This View and change the system time and date. View identification information about the computer. View specification information about the processor, memory size, system BIOS, and keyboard controller version (select models only).

Security menu

Select Administrator password Power-On Password To Do This Enter, change, or delete an administrator password. Enter, change, or delete a power-on password.
System Configuration menu
Select Language Support Boot Options To Do This Change the Setup Utility language. Set the following boot options: f10 and f12 Delay (sec.)Set the delay for the f10 and f12 functions of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20). CD-ROM bootEnable/disable boot from CD-ROM. Floppy bootEnable/disable boot from Floppy. Internal Network Adapter bootEnable/disable boot from Internal Network Adapter. Boot OrderSet the boot order for: Button Sound (select models only) Virtualization Technology Processor C4 State USB Floppy ATAPI CD/DVD ROM Drive Hard drive USB Diskette on Key USB Hard drive Network adapter
Enable/disable the Quick Launch Button tapping sound. Enable/disable the processor Virtualization Technology. Enable/disable the processor C4 sleep state.

Diagnostics menu

Select Hard Disk Self Test To Do This Run a comprehensive self-test on the hard drive. NOTE: On models with two hard drives, this menu option is called the Primary Hard Disk Self Test. Secondary Hard Disk Self Test (select models only) Memory Test Run a comprehensive self-test on a secondary hard drive. Run a diagnostic test on the system memory.

Specifications

Computer specifications

System memory map specifications, AMD
Size 128 KB 16 KB 8 KB 4 KB 256 B 256 B 16 B 256 B 4 KB 4 KB 512 KB 16 MB 16 MB 2 KB 256 B 256 B 256 B 256 B 16 KB 256 KB 1 KB Memory address 000A0000-000BFFFF B0000000-B0003FFF B0004000-B0005FFF B0006000-B0006FFF B0007000-B00070FF B0007400-B00074FF B0007800-B000780F B0007C00-B0007CFF B0008000-B0008FFF B0009000-B0009FFF B0080000-B00FFFFF B1000000-B1FFFFFF B2000000-B2FFFFFF B3000000-B30007FF B3000800-B30008FF B3000C00-B3000CFF B3001000-B30010FF B3001400-B30014FF B6000000-B6003FFF C0000000-CFFFFFFF FED00000-FED003FF System function nVidia MCP67M HDA Controller Standard Dual Channel PCI IDE Controller Standard OpenHCD USB Host Controller Standard Enhanced PCI to USB Host Controller Standard Enhanced PCI to USB Host Controller nVidia nForce Networking Controller nVidia nForce Networking Controller Standard OpenHCD USB Host Controller nVidia nForce Networking Controller nVidia nForce System Management Controller nVidia MCP67M nVidia MCP67M RICOH OHCI Compliant IEEE 1394 Host Controller SDA Standard Compliant SD Host Controller Ricoh SD/MMC Host Controller Ricoh Memory Stick Controller Ricoh XD-Picture Card Controller Broadcom WLAN adapter nVidia MCP67M High precision event timer
100 Chapter 6 Specifications

Screw listing

This section provides specification and reference information for the screws and screw locks used in the computer. All screws and screw locks listed in this section are available in the Screw Kit, spare part number 434893-001, and the Display Screw Kit, spare part number 431400-001.
Phillips PM2.05.0 captive screw

Color Black

Quantity 5

Length 5.0 mm

Thread 2.0 mm

Head width 5.0 mm

Where used: (1) Two captive screws (secured by C-clips) that secure the hard drive cover to the computer
Phillips PM2.05.0 captive screw 101
(2) Three captive screws (secured by C-clips) that secure the memory/WLAN module compartment cover to the computer

Phillips PM3.03.0 screw

Color Silver

Quantity 4

Length 3.0 mm

Thread 3.0 mm

Where used: 4 screws that secure the hard drive bracket to the hard drive
102 Chapter 7 Screw listing

Phillips PM2.03.0 screw

Quantity 10

Head width 4.5 mm

Where used: 2 screws that secure the WLAN module to the system board
Where used: 2 screws that secure the optical drive bracket to the optical drive
Phillips PM2.03.0 screw 103
Where used: 2 screws that secure the wireless antenna transceivers to the display enclosure

Recovering system information 119
Number each disc before inserting it into the computer optical drive. If necessary, you can exit the program before you have finished creating the recovery discs. The next time you open Recovery Manager, you will be prompted to continue the disc creation process.
To create a set of recovery discs: 1. Select Start > All Programs > Recovery Manager > Recovery Manager. Recovery Manager opens. 2. Click Advanced Options. NOTE: If you are operating the computer on battery power, you will be prompted to connect to AC power before you can go to the next step. 3. 4. Click Recovery disc creation, and then click Next. Follow the on-screen instructions.
Backing up your information

When to back up

On a regularly scheduled basis NOTE: Set reminders to back up your information periodically. Before the computer is repaired or restored Before you add or modify hardware or software

Backup suggestions

Create a set of recovery discs using Recovery Manager. Create system restore points using the Windows System Restore feature, and periodically copy them to disc. Store personal files in the Documents folder and back up these folders periodically. Back up templates stored in their associated programs. Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings. The screen shot can be a time saver if you have to reset your preferences. To copy the screen and paste it into a word-processing document, follow these steps: a. b. Display the screen. Copy the screen: To copy only the active window, press alt+fn+prt sc. To copy the entire screen, press fn+prt sc. c. Open a word-processing document, and then select Edit > Paste.
120 Chapter 8 Backup and recovery
Using system restore points
When you back up your system, you are creating a system restore point. A system restore point allows you to save and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes made to your system. NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since the last restore point. You also can create additional restore points to provide increased protection for your system files and settings. When to create restore points Before you add or extensively modify software or hardware Periodically, whenever the system is performing optimally If you revert to a restore point and then change your mind, you can reverse the restoration.
Create a system restore point 1. 2. 3. 4. 5. Select Start > Control Panel > System and Maintenance > System. In the left pane, click System protection. Click the System Protection tab. Under Automatic restore points, select the disk for which you want to create a restore point. Click Create. The System Protection window opens. 6. Follow the on-screen instructions.

Restore to a previous date and time To revert to a restore point (created at a previous date and time), when the computer was functioning optimally, follow these steps: 1. 2. 3. 4. Select Start > Control Panel > System and Maintenance > System. In the left pane, click System protection. Click the System Protection tab. Click the System Restore button, and then click Next. The System Restore window opens. 5. Follow the on-screen instructions.
Recovering system information 121

Performing a recovery

NOTE: You can only recover files that you have previously backed up. HP recommends that you use Recovery Manager to create an entire drive backup as soon as you set up your computer. Recovery Manager software allows you to repair or restore the system if you experience system failure or instability. Recovery Manager works from recovery discs that you create or from a dedicated recovery partition on the hard drive. NOTE: Windows has its own built-in repair features, such as System Restore and driver roll-back capabilities. If you have not already tried these features, try them before using Recovery Manager. NOTE: Recovery Manager recovers only software that was preinstalled at the factory. Software not provided with this computer must be downloaded from the manufacturer's Web site or reinstalled from the disc provided by the manufacturer.
Recovering from the recovery discs
To restore the system from the recovery discs: 1. 2. 3. Back up all personal files. Insert the first recovery disc into the optical drive and restart the computer. Follow the on-screen instructions.
Recovering from the partition on the hard drive
You can perform a recovery from the partition on the hard drive from either the Start button or f11. To restore the system from the partition, follow these steps: 1. Access Recovery Manager in either of the following ways: Select Start > All Programs > Recovery Manager > Recovery Manager. or Restart the computer and press f11 while the Press <F11> for recovery message is displayed on the screen. Then select Recovery Manager.
Recovery Manager opens. 2. 3. 4. Click Advanced Options. Click System recovery, and then click Next. Follow the on-screen instructions.
122 Chapter 8 Backup and recovery
Connector pin assignments

Audio-out (headphone)

Signal Audio out, left channel Audio out, right channel Ground

Audio-in (microphone)

Signal Audio signal in Audio signal in Ground
Audio-out (headphone) 123

External monitor

Pin 15
Signal Red analog Green analog Blue analog Not connected Ground Ground analog Ground analog Ground analog +5 VDC Ground Monitor detect DDC 2B data Horizontal sync Vertical sync DDC 2B clock

doc1

Installing or upgrading to Microsoft Windows 7

On Selected HP Computers

Table of Contents
Introduction....2 List of Tested Systems...2 Install Guide....3 Minimum Requirements...3 Additional Requirements...3 Operating System Requirements for Upgrades..3 Recommended Install Order...3 Back Up All Important Files and Burn Recovery Discs..4 Check and Upgrade BIOS...4 Find Drivers and Software Before Upgrading..4 Find Software Updates for Custom Installs..5 Check Compatibility...5 Perform Upgrade or Custom Install...5 *Important* Update Drivers and Software..7 Restore User Data...7 Known Issues....7 For More Information...7
These instructions are provided as a courtesy for customers upgrading to Microsoft Windows 7. If you need help using a Windows 7 disc that was not obtained through the Windows 7 Upgrade Option Program from HP, contact Microsoft: http://windows.microsoft.com/en-us/windows7/help Microsoft supports the Windows 7 software under Microsoft warranty terms. However, HP continues to support your computer hardware under the terms of your computer's limited warranty. If you received a Windows 7 Upgrade disc through the Windows 7 Upgrade Option Program from HP and you need assistance beyond these instructions, please contact HP by visiting www.hp.com/go/contacthp.

Introduction

HP is committed to helping you upgrade your HP or Compaq computer to Windows 7. HP engineers have tested most models of eligible HP computers with Windows 7 to ensure they are compatible and to help you pick the version that works best for you. This document is about installing Windows 7 on selected HP products. It provides basic instructions for the installation process. This information is current as of the date of publication. See http://www.hp.com/support for the most current information about upgrading to Windows 7. HP recommends backing up all of your important files, and burning or locating your system recovery discs before beginning any upgrade or installation.

List of Tested Systems

HP HP HP HP HP HP HP HP HP HP HP HP HP HP Pavilion dv2 Pavilion dv3 Pavilion dv4 Pavilion dv5 Pavilion dv6 Pavilion dv7 Pavilion dv3500 Touchsmart tx2 Touchsmart tx2500 Touchsmart tx2600 HDX 16 HDX 18 G50 G60
The following HP notebook PCs are supported with Windows 7: HP G61 HP G70 HP G71 HP Mini 110 Compaq Mini 110 Compaq Presario CQ35 Compaq Presario CQ40 Compaq Presario CQ45 Compaq Presario CQ50 Compaq Presario CQ60 Compaq Presario CQ61 Compaq Presario CQ70 Compaq Presario CQ71

Install Guide

Your computer hardware must meet the minimum system requirements listed below before you can install Windows 7.

Minimum Requirements

1-GHz or faster 32-bit (x86) or 64-bit (x64) processor 1 GB RAM (32-bit) or 2 GB RAM (64-bit) 16 GB available hard disk space (32-bit) or 20 GB (64-bit) DirectX 9 graphics device with WDDM 1.0 or higher driver

Additional Requirements

Internet access is required to check compatibility and obtain updated software and drivers. Depending on resolution, video playback may require additional memory and advanced graphics hardware. For some Windows Media Center functionality a TV tuner and additional hardware may be required. Windows touch and tablet computers require specific hardware. HomeGroup requires a network and PCs running Windows 7. DVD/CD authoring requires a compatible optical drive. BitLocker To Go requires a USB flash drive. Music and sound require audio output.
For details, see http://windows.microsoft.com/en-us/windows7/products/systemrequirements. Some features of Windows 7 and Microsoft add-on components are dependent on specific hardware features which may not be present in all HP computers.

Operating System Requirements for Upgrades
Upgrades from Windows Vista must be to the same language and architecture (32-bit or 64-bit) as the version of Windows 7. You cannot upgrade from Windows XP to Windows 7. Perform a custom install to upgrade from Windows XP. A custom install replaces the current operating system, and does not preserve software applications, data, or settings.
Recommended Install Order
1. Back up user data and burn recovery disks 2. Check and upgrade BIOS 3. Find drivers and software 4. Check for application and hardware compatibility 5. Perform upgrade or custom install 6. Update drivers and software 7. Restore user data
Back Up All Important Files and Burn Recovery Discs
If you have not already done so, create a set of system recovery discs or order them from http://www.hp.com. Prior to upgrading or installing Windows 7, backup your important files using Microsoft Backup and Restore Center or Microsoft Windows Easy Transfer. When finished, verify that the backup was successful and that you can access your files. If you want to back up your files using something other than Backup and Restore Center, verify that it is compatible with Windows 7 before choosing it as your backup solution. Do not use backup software that is incompatible with Windows 7. If you are performing a custom install, make sure you have a copy of your backup software on your USB drive or burn it to a CD/DVD so it can be used later to restore your files. For more information about Windows Easy Transfer, see http://support.microsoft.com/kb/928635. For more information about Using Microsoft Backup and Restore Center see http://www.microsoft.com/windows/windows-vista/features/backup.aspx.

Check and Upgrade BIOS

1. Turn on the computer and immediately press the F10 key repeatedly until a BIOS Setup Utility screen opens. 2. Write down the BIOS revision number located on the main page or at the bottom of the screen. 3. Go to the HP Customer Care Web site (http://www.hp.com/support), select your location and language (if required), select Software and Drivers, and enter your computer model number to find software and driver updates for your computer. 4. If a BIOS update is available that has a higher revision number, download and install it following the instructions on the Web site.
Find Drivers and Software Before Upgrading
Find and install software updates for Vista: 1. Connect to Microsoft Windows Update and install all Important and Recommended updates. Also, install all Optional driver updates. When you are finished installing a series of updates, restart the computer, and repeat this step until Microsoft Windows Update displays Windows is up to date. 2. Download and install the latest virus and spyware definitions for your anti-virus and security software. After you have installed the latest virus and spyware definitions, use your software to scan and clean your system of viruses, spyware, and malware. 3. Download and install the latest Windows Vista SoftPaqs for drivers, firmware, and software from the HP Web site. Go to the HP Customer Care Web site (http://www.hp.com/support), select your location and language (if required), select Software and Drivers, and enter your computer model number to find software and driver updates for your computer.

Find Software Updates for Custom Installs
If you are planning to install Windows 7 using the custom install method, such as when your computer is using Windows XP, then you will need to find and temporarily store drivers for Windows 7. 1. Download Windows 7 SoftPaqs for drivers, firmware, and software from the HP Web site. Go to the HP Customer Care Web site (http://www.hp.com/support), select your location and language (if required), select Software and Drivers, and enter your computer model number to find software and driver updates for your computer. 2. Copy the SoftPaqs to a USB drive or burn them to a CD or DVD. You will need these SoftPaqs after the Windows 7 installation is finished.

Check Compatibility

Use the Windows 7 Upgrade Advisor provided by Microsoft: http://www.microsoft.com/windows/windows-7/upgrade-advisor.aspx The Windows 7 Upgrade Advisor lists all known compatibility issues and recommends appropriate actions. You might be instructed to uninstall an application before upgrading to Windows 7. Check the software vendors website or contact the vendors for Windows 7 compatible versions before upgrading. Aero Glass is not available on Windows 7 Home Basic or Starter editions. Aero Glass functionality might not be available on computers with graphics cards that do not have native support. Check for updated Windows 7 graphic drivers on Windows Update and the HP Web site. If a software application or device driver is not compatible with Windows 7, you will need to decide if you want to continue the upgrade process or not use the device. You can purchase and install compatible devices after Windows 7 is installed.
Perform Upgrade or Custom Install
Determine if you will perform an upgrade or a custom install. If you are upgrading from Windows XP to Windows 7, you must perform a custom install. An upgrade installs over your existing operating system, keeping existing applications, drivers, and your personal files in place. A custom install will erase your existing operating system, including all of your applications, drivers, and data. After a custom install, previously existing applications, drivers, and data will no longer be available. If you choose this option, back up your data now if you have not done so.

Steps for Upgrade

1. Purchase a version of Windows 7 version that best fits your needs. a. Refer to Microsofts chart at http://windows.microsoft.com/enUS/windows7/products/compare-editions. b. You must purchase the same language currently being used on your system. 2. Insert the Windows 7 disc into your optical drive. 3. If the install window does not open automatically, run setup.exe from the disc. 4. Click Install Now. 5. Follow the on-screen instructions, choosing the following options: a. Select Go online to get the latest updates. b. Select Upgrade. c. Select other options as appropriate.
6. Do not restart or shut down your computer until the upgrade process has completed.

Steps for Custom Install

WARNING! A custom install will erase all data, applications, and settings from your computer. You must back up your data and burn system recovery disks before proceeding.
1. Purchase the Windows 7 version suitable for your needs. Refer to Microsofts chart at http://windows.microsoft.com/en-US/windows7/products/compareeditions. 2. Turn on the computer and open the optical drive. 3. Insert the Windows 7 disc into your optical drive and turn off your computer. 4. Turn on the computer and boot to the Windows 7 disc. 5. Click Install Now. 6. Follow the on-screen instructions, choosing the following options: a. Select Go online to get the latest updates. b. Select Custom. c. Select other options as appropriate
7. Do not reboot or shut down your computer until the install process has completed.
*Important* Update Drivers and Software
1. Connect to Windows Update and install all Important and Recommended updates. Install all Optional driver updates. Reboot the system after performing Windows Update, and repeat this step until it says Windows is up to date. 2. If you performed a custom install, install drivers, firmware, and software downloaded to your USB drive or external hard drive. 3. Download and install Windows 7 SoftPaqs for drivers, firmware, and software from the HP Web site at http://www.hp.com/support. 4. Download and install the latest anti-virus and anti-spyware definitions.

Restore User Data

Use Backup and Restore Center, Windows Easy Transfer, or other backup software to restore your important files that you backed up prior to installing Windows 7.

Known Issues

Please see the Customer Care Web site for a complete list of known driver, hardware, and software compatibility issues.

For More Information

For more information on Windows 7, please visit these websites: http://www.microsoft.com/en-US/windows7/products/home http://windows.microsoft.com/en-us/windows7/Installing-Windowsrecommended-links http://www.hp.com/support

2009-2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft, Windows and Vista are trademarks of the Microsoft group of companies. 596246-002, January 2010

 

Tags

AVF 109 RME700 Fantasy X-2 EB1501 IG-80 V101 Control 2 Sunfire 2002 HQ7415 SP0842N-TKY IC-Q7 F1040N-WN TMS320F2812 MZ-1100 IA5879 M5-S4331 Network Usb-P3K Wtmc6500UC ECM-CS10 C-AX10 VX8300 Strk502P HDC-SD100P ICF-C255RC RM-S1AM AJ-PCS060G MAC S Grande 16-KEY Wg201 B Music BMW 328I - 2004 Minish CAP Motor 100 M2500 S200 EXR RM826A SY-MK7 500 Rack W61PC IC-W32A HTS3152 93 A-X320 43A92 Singer 50D Lifestyle 235 R3 0 Igroove SXT Aastra I740 Headset H500 Hts5800h-37B Gloss Qtek 2020 Kawai CL30 RJP924 Printer DSC-T700 Extensa-5220 CDM-7835R LD-2293THB VC-300HD DSC-W190 Server WD-10165FU Scanmaker 3840 IUC-4100 Bizhub C253 CF110 St 800 MHC-RXD3 GR-DVL200 Quikstart Recycler NW-E205 190-2 NTM-910dual VP-D39I KX-TGA740 Qd2100 Xl4600DL Samsung P50H GR-642tvpf FFH-DV25AD Excursion-2000 TX-32PM11P Dreamweaver MX Micro-nikkor CG1400 PDP-43MXE1 Laserjet 3150 KX-TG5240 VPL-EX3 Motorola V878 IPF710 SPD3500CC Matrix Review 4000DS RLT5031AH Singer 15

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101