Installing or upgrading to Microsoft Windows 7

On Selected HP Computers

Table of Contents
Introduction....2 List of Tested Systems...2 Install Guide....3 Minimum Requirements...3 Additional Requirements...3 Operating System Requirements for Upgrades..3 Recommended Install Order...3 Back Up All Important Files and Burn Recovery Discs..4 Check and Upgrade BIOS...4 Find Drivers and Software Before Upgrading..4 Find Software Updates for Custom Installs..5 Check Compatibility...5 Perform Upgrade or Custom Install...5 *Important* Update Drivers and Software..7 Restore User Data...7 Known Issues....7 For More Information...7
These instructions are provided as a courtesy for customers upgrading to Microsoft Windows 7. If you need help using a Windows 7 disc that was not obtained through the Windows 7 Upgrade Option Program from HP, contact Microsoft: http://windows.microsoft.com/en-us/windows7/help Microsoft supports the Windows 7 software under Microsoft warranty terms. However, HP continues to support your computer hardware under the terms of your computer's limited warranty. If you received a Windows 7 Upgrade disc through the Windows 7 Upgrade Option Program from HP and you need assistance beyond these instructions, please contact HP by visiting www.hp.com/go/contacthp.

Introduction

HP is committed to helping you upgrade your HP or Compaq computer to Windows 7. HP engineers have tested most models of eligible HP computers with Windows 7 to ensure they are compatible and to help you pick the version that works best for you. This document is about installing Windows 7 on selected HP products. It provides basic instructions for the installation process. This information is current as of the date of publication. See http://www.hp.com/support for the most current information about upgrading to Windows 7. HP recommends backing up all of your important files, and burning or locating your system recovery discs before beginning any upgrade or installation.

List of Tested Systems

HP HP HP HP HP HP HP HP HP HP HP HP HP HP Pavilion dv2 Pavilion dv3 Pavilion dv4 Pavilion dv5 Pavilion dv6 Pavilion dv7 Pavilion dv3500 Touchsmart tx2 Touchsmart tx2500 Touchsmart tx2600 HDX 16 HDX 18 G50 G60
The following HP notebook PCs are supported with Windows 7: HP G61 HP G70 HP G71 HP Mini 110 Compaq Mini 110 Compaq Presario CQ35 Compaq Presario CQ40 Compaq Presario CQ45 Compaq Presario CQ50 Compaq Presario CQ60 Compaq Presario CQ61 Compaq Presario CQ70 Compaq Presario CQ71

Install Guide

Your computer hardware must meet the minimum system requirements listed below before you can install Windows 7.

Minimum Requirements

1-GHz or faster 32-bit (x86) or 64-bit (x64) processor 1 GB RAM (32-bit) or 2 GB RAM (64-bit) 16 GB available hard disk space (32-bit) or 20 GB (64-bit) DirectX 9 graphics device with WDDM 1.0 or higher driver

Additional Requirements

Internet access is required to check compatibility and obtain updated software and drivers. Depending on resolution, video playback may require additional memory and advanced graphics hardware. For some Windows Media Center functionality a TV tuner and additional hardware may be required. Windows touch and tablet computers require specific hardware. HomeGroup requires a network and PCs running Windows 7. DVD/CD authoring requires a compatible optical drive. BitLocker To Go requires a USB flash drive. Music and sound require audio output.
For details, see http://windows.microsoft.com/en-us/windows7/products/systemrequirements. Some features of Windows 7 and Microsoft add-on components are dependent on specific hardware features which may not be present in all HP computers.
Operating System Requirements for Upgrades
Upgrades from Windows Vista must be to the same language and architecture (32-bit or 64-bit) as the version of Windows 7. You cannot upgrade from Windows XP to Windows 7. Perform a custom install to upgrade from Windows XP. A custom install replaces the current operating system, and does not preserve software applications, data, or settings.
Recommended Install Order
1. Back up user data and burn recovery disks 2. Check and upgrade BIOS 3. Find drivers and software 4. Check for application and hardware compatibility 5. Perform upgrade or custom install 6. Update drivers and software 7. Restore user data
Back Up All Important Files and Burn Recovery Discs
If you have not already done so, create a set of system recovery discs or order them from http://www.hp.com. Prior to upgrading or installing Windows 7, backup your important files using Microsoft Backup and Restore Center or Microsoft Windows Easy Transfer. When finished, verify that the backup was successful and that you can access your files. If you want to back up your files using something other than Backup and Restore Center, verify that it is compatible with Windows 7 before choosing it as your backup solution. Do not use backup software that is incompatible with Windows 7. If you are performing a custom install, make sure you have a copy of your backup software on your USB drive or burn it to a CD/DVD so it can be used later to restore your files. For more information about Windows Easy Transfer, see http://support.microsoft.com/kb/928635. For more information about Using Microsoft Backup and Restore Center see http://www.microsoft.com/windows/windows-vista/features/backup.aspx.

Check and Upgrade BIOS

1. Turn on the computer and immediately press the F10 key repeatedly until a BIOS Setup Utility screen opens. 2. Write down the BIOS revision number located on the main page or at the bottom of the screen. 3. Go to the HP Customer Care Web site (http://www.hp.com/support), select your location and language (if required), select Software and Drivers, and enter your computer model number to find software and driver updates for your computer. 4. If a BIOS update is available that has a higher revision number, download and install it following the instructions on the Web site.
Find Drivers and Software Before Upgrading
Find and install software updates for Vista: 1. Connect to Microsoft Windows Update and install all Important and Recommended updates. Also, install all Optional driver updates. When you are finished installing a series of updates, restart the computer, and repeat this step until Microsoft Windows Update displays Windows is up to date. 2. Download and install the latest virus and spyware definitions for your anti-virus and security software. After you have installed the latest virus and spyware definitions, use your software to scan and clean your system of viruses, spyware, and malware. 3. Download and install the latest Windows Vista SoftPaqs for drivers, firmware, and software from the HP Web site. Go to the HP Customer Care Web site (http://www.hp.com/support), select your location and language (if required), select Software and Drivers, and enter your computer model number to find software and driver updates for your computer.
Find Software Updates for Custom Installs
If you are planning to install Windows 7 using the custom install method, such as when your computer is using Windows XP, then you will need to find and temporarily store drivers for Windows 7. 1. Download Windows 7 SoftPaqs for drivers, firmware, and software from the HP Web site. Go to the HP Customer Care Web site (http://www.hp.com/support), select your location and language (if required), select Software and Drivers, and enter your computer model number to find software and driver updates for your computer. 2. Copy the SoftPaqs to a USB drive or burn them to a CD or DVD. You will need these SoftPaqs after the Windows 7 installation is finished.

Check Compatibility

Use the Windows 7 Upgrade Advisor provided by Microsoft: http://www.microsoft.com/windows/windows-7/upgrade-advisor.aspx The Windows 7 Upgrade Advisor lists all known compatibility issues and recommends appropriate actions. You might be instructed to uninstall an application before upgrading to Windows 7. Check the software vendors website or contact the vendors for Windows 7 compatible versions before upgrading. Aero Glass is not available on Windows 7 Home Basic or Starter editions. Aero Glass functionality might not be available on computers with graphics cards that do not have native support. Check for updated Windows 7 graphic drivers on Windows Update and the HP Web site. If a software application or device driver is not compatible with Windows 7, you will need to decide if you want to continue the upgrade process or not use the device. You can purchase and install compatible devices after Windows 7 is installed.
Perform Upgrade or Custom Install
Determine if you will perform an upgrade or a custom install. If you are upgrading from Windows XP to Windows 7, you must perform a custom install. An upgrade installs over your existing operating system, keeping existing applications, drivers, and your personal files in place. A custom install will erase your existing operating system, including all of your applications, drivers, and data. After a custom install, previously existing applications, drivers, and data will no longer be available. If you choose this option, back up your data now if you have not done so.

Steps for Upgrade

1. Purchase a version of Windows 7 version that best fits your needs. a. Refer to Microsofts chart at http://windows.microsoft.com/enUS/windows7/products/compare-editions. b. You must purchase the same language currently being used on your system. 2. Insert the Windows 7 disc into your optical drive. 3. If the install window does not open automatically, run setup.exe from the disc. 4. Click Install Now. 5. Follow the on-screen instructions, choosing the following options: a. Select Go online to get the latest updates. b. Select Upgrade. c. Select other options as appropriate.

6. Do not restart or shut down your computer until the upgrade process has completed.

Steps for Custom Install

WARNING! A custom install will erase all data, applications, and settings from your computer. You must back up your data and burn system recovery disks before proceeding.
1. Purchase the Windows 7 version suitable for your needs. Refer to Microsofts chart at http://windows.microsoft.com/en-US/windows7/products/compareeditions. 2. Turn on the computer and open the optical drive. 3. Insert the Windows 7 disc into your optical drive and turn off your computer. 4. Turn on the computer and boot to the Windows 7 disc. 5. Click Install Now. 6. Follow the on-screen instructions, choosing the following options: a. Select Go online to get the latest updates. b. Select Custom. c. Select other options as appropriate
7. Do not reboot or shut down your computer until the install process has completed.
*Important* Update Drivers and Software
1. Connect to Windows Update and install all Important and Recommended updates. Install all Optional driver updates. Reboot the system after performing Windows Update, and repeat this step until it says Windows is up to date. 2. If you performed a custom install, install drivers, firmware, and software downloaded to your USB drive or external hard drive. 3. Download and install Windows 7 SoftPaqs for drivers, firmware, and software from the HP Web site at http://www.hp.com/support. 4. Download and install the latest anti-virus and anti-spyware definitions.

Restore User Data

Use Backup and Restore Center, Windows Easy Transfer, or other backup software to restore your important files that you backed up prior to installing Windows 7.

Known Issues

Please see the Customer Care Web site for a complete list of known driver, hardware, and software compatibility issues.

For More Information

For more information on Windows 7, please visit these websites: http://www.microsoft.com/en-US/windows7/products/home http://windows.microsoft.com/en-us/windows7/Installing-Windowsrecommended-links http://www.hp.com/support
2009-2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft, Windows and Vista are trademarks of the Microsoft group of companies. 596246-002, January 2010

HP-00007-01, Appendix 3

13-Oct-2004
Appendix 3 Product End-of-Life Disassembly instructions Product Identification: Model Name Description Compaq Presario SR1000 Series PC Desktop PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment. 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Item Description Notes Quantity of items included in product. Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries With a surface greater than 10 square cm All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps 3 1
Mercury containing components
Liquid Crystal Displays (LCD) with a surface greater than 100 square cm Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB / PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords Gas Discharge Lamps Plastics containing Brominated Flame Retardants Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Components and waste containing asbestos
Declaration limited to case plastics only. Include the cartridges, print heads, tubes, vent chambers, and service stations. 0 0

HP Restricted Page 1

Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances
Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Clipper Screw Driver Tool Size (if applicable)
Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1 Panel Access Disassemble: loosing one thumb screw, removing panel-Access access 16 Front Bezel Disassemble: press and hold down, press tab(*4), take out front bezel M/B Disassemble: turn the screws(*8) to loosen it , take M/B out of Chassis. Remove RTC coin cell battery for selective treatment. EMI Shield Disassemble: pull snap up , take out of I/O shield System Fan Disassemble: turn the screws(*4) to loosen it , take system fan out of Chassis Power LED holder Disassemble: press Power LED holder hooks to take it out Front I/O cover Disassemble: pull snap up(*4), pull the front I/O cover backward, take Front I/O bezel out of Front I/O bracket Front I/O bracket Disassemble: turn the screw to loosen it, pull the front I/O bezel toward right, take Front I/O bracket out of chassis Main Bezel Sub-Disassemble Optional parts: Press two hooks to take out of FDD bezel trim ODD Disassemble : pull snap up ,take out ODD HDD Disassemble : pull snap up ,take out HDD Cardreader Disassemble : pull snap up ,take out Cardreader Floppy Disassemble : pull snap up ,take out Floppy Latch Disassemble: pull snap up , take out Latch Power Supply Disassemble: turn the screws(*4) to loosen it , take Power Supply out of Chassis Nameplate Disassemble: Ejecting two hooks

HP Restricted Page 2

Power button Disassemble: press two hooks and take out the Power button HDD lence Disassemble: press two hooks ,take out HDD lence Cardreader bezel trim Disassemble: pull snap up , take out Cardreader bezel trim Backup bezel Disassemble: pull hooks(*8) up, take out Backup bezel Eject ODD button*2 Disassemble: pull snap up, pull out Eject ODD button Spring of Eject ODD button*2 Disassemble: pull the spring out of the hooks CD shutter door*2 Disassemble: take off hinge(*2), takel out CD shutter door Basepan-CPU Disassemble: take out the nail with driller ,and take out Basepan-CPU Bezel latch Disassemble: take out Bezel latch
OPTIONAL: Depending upon the complexity of the disassembly process, a graphic depicting the locations of items contained within the product which require selective treatment (with descriptions and arrows identifying locations) can be inserted below:

HP Restricted Page 3