QuickSpecs

Overview

HP LP2065 20-inch LCD Monitor
1. Opens, selects or exits the OSD menu. 4. Selects video input, DVI-I#1 or DVI-I#2. 2. Navigates backward through the OSD menu and 5. Turns the monitor on or off. decreases adjustment levels. When the OSD menu is inactive, activates the auto-adjustment feature to optimize the screen image. 3. Navigates forward through the OSD menu and increases adjustment levels.

Models

Workstation Volume Channel EF227A4-#xxx
DA - 12377 Worldwide QuickSpecs Version 13 12/15/2008

Page 1

Technical Specifications
Panel Type Viewable Image Area (diagonal) Screen Opening (WxH) Panel Type Aspect Ratio Viewing Angle (typical)1 Brightness (typical)1 Contrast Ratio (typical)1 Response Time (typical)1 Pixel Pitch Color Gamut Backlight Lamp Life (to half brightness) Bezel Width Buttons or Switches
20-inch Active Matrix TFT (thin film transistor) 20.1 in (51 cm) 16.2 x 12.17 in (40.8 x 30.6 cm) IPS 4:horizontal/178 vertical (10:1 minimum contrast ratio) 300 nits (cd/m2) 800:ms2 0.255 mm 72% 45K hours
On Screen Display (OSD) Controls
Signal Interface/ Performance
16 mm OSD menu select, auto adjust/OSD up, OSD down Input select, power Languages English, French, German, Spanish, Italian, Dutch, and Japanese User Controls Brightness, contrast, positioning, color temperature, individual color control, serial number display, full screen resolutions, clock, clock phase, input selection, image control (including scaling), and factory reset Horizontal Frequency 30 to 94 kHz (VGA input); 30 to 92 KHz (DVI input for modes with pixel clock less than 162 MHz) Vertical Frequency 48 to 85 Hz (VGA input); 48 to 85 Hz (DVI input for modes with pixel clock less than 162 MHz) Native Resolution 1600 x 1200 @ 60 Hz (recommended) Preset VESA Graphic 1600 x 1200 @ 60 Hz, 75 Hz (analog input) Modes (non-interlaced) 1280 x 1024 @ 60 Hz, 75 Hz, and 85 Hz 1280 x 960 @ 60 Hz 1152 x 900 @ 66 Hz 1024 x 768 @ 60 Hz, 75 Hz, and 85 Hz 800 x 600 @ 60 Hz, 85 Hz 640 x 480 @ 60 Hz, 75 Hz, and 85 Hz Text Mode 720 x 400 @ 70 Hz Mac Mode 1152 x 870 @ 75 Hz and 832 x 624 @ 75 Hz Sun Mode 1152 x 900 @ 66 Hz Maximum Pixel Clock 202 MHz (analog input); 162 MHz (DVI input) Speed User Programmable Yes, 10 Modes Anti-Glare Yes Anti-Static Yes

Page 2

Default Color Temperature Plug and Play Self Powered USB 2.0 Hub Input Signal Input Impedance Sync Input Video Cable Video Cable Length Input Power Frequency Typical Power Consumption Maximum Power Saving Power Cable Length Dimensions (H x W x D) 6500 K Video/Other Inputs
Yes One upstream, four downstream ports (cable included) Two DVI-I connectors (dual VGA analog or dual digital input possible) 75 ohms 10% Separate sync (HSYNC/VSYNC); composite sync, Sync on Green Two VGA to DVI-I; two DVI-D to DVI-I 6.5 ft (1.98 m) Auto-Ranging, 90 ~ 265 VAC; internal power supply, 50 Hz/60 Hz 47.5 to 63 Hz 55 watts (without USB ports); 70 watts (USB ports fully loaded) < 75 watts < 2 watts 5.9 ft (1.8 m) Unpacked w/ stand

Mechanical

Weight

Environmental

Environmental Data
Tilt Range Swivel Range Height Adjustable Pivot Rotation Base Temperature Operating Temperature Non-operating Humidity Operating Humidity Non-operating Altitude Operating Altitude Non-operating Eco-Label Certifications and Declarations
16.7 to 21.8 x 17.4 x 8.67 in (42.5 to 55.5 x 44.3 x 22.0 cm) Unpacked w/o stand 13.58 x 17.4 x 3.42 in (head only) (34.5 x 44.3 x 8.7 cm) Packaged 11.77 x 22.2 x 16.77 in (29.9 x 56.4 x 42.6 cm) Unpacked With stand: 20.28 lb (9.2 kg); Without stand: 12.65 lb (5.75 kg) Packaged 26.3 lb (11.95 kg) -5 to + 25 vertical tilt -45 to + 45 Yes, range 5.1 in (13.0 cm) Yes Detachable, ships detached 41 to 95 F (5 to 35 C) 6 to 140 F (-10 to 60 C) 20% to 80% non-condensing 20% to 80% +12,000 ft (3657.6 m) +40,000 ft (12,192 m) This product has received or is in the process of being certified to the following approvals and may be labeled with one or more of these marks: ENERGY STAR IT ECO declaration TCO 03 EPEAT Silver

Page 3

Energy Consumption AC Input Voltage at AC Input Voltage at AC Input Voltage at (in accordance with 100 VAC +/- 5 VAC, VAC +/- 5 VAC, VAC +/- 5 VAC, 50 ENERGY STAR test Hz +/- 3 Hz Hz +/- 3 Hz Hz +/- 3 Hz method) Normal 39.5 watts 39.2 watts 38.8 watts Operation Sleep 0.9 watts 0.9 watts 1.1 watts Off 0.9 watts 0.9 watts 1.1 watts Heat Dissipation* 100 VAC, 50 Hz 115 VAC, 60 Hz 230 VAC, 50 Hz Normal 135 BTU/hr 134 BTU/hr 132 BTU/hr Operation Sleep 3.07 BTU/hr 3.07 BTU/hr 3.75 BTU/hr Off 1.70 BTU/hr 1.70 BTU/hr 2.38 BTU/hr * Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour. Longevity and Upgradeability features contained in the product include: Upgrading One upstream and four downstream USB ports Ergonomics The monitor meets the ergonomic requirement of EN-ISO 13406-2 for flat panel displays. Additional Information This product is in compliance with the Restrictions of Hazardous Substances (RoHS) Directive, 2002/95/EC. This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE) Directive, 2002/96/EC. This product is in compliance with California Proposition 65 (State of California; Safe Drinking Water and Toxic Enforcement Act of 1986). This product is in compliance with the IEEE 1680 (EPEAT) standard at the Silver level, see www.epeat.net. Plastics parts weighing over 25 grams used in the product are marked per ISO 11469 and ISO1043. Display meets the requirement for low frequency electromagnetic fields per TCO and prEN50279 A/B/C. This product contains 0% recycled materials (by wt.) This product is 97.8% recyclable when properly disposed of at end of life (8020/7801). Packaging Materials Corrugated Carton 11 kg HDPE Bag 0.065 kg Polystyrene 0.535 kg This product does not contain any of the following substances in excess of regulatory limits (refer to the HP General Specification for the Environment at www.hp.com/hpinfo/globalcitizenship/ environment/supplychain/gen_specifications.html): Asbestos Certain Azo Colorants

Material Usage

Page 4

Packaging

Certain Brominated Flame Retardants may not be used as flame retardants in plastics Cadmium Chlorinated Hydrocarbons Chlorinated Paraffins Formaldehyde Halogenated Diphenyl Methanes Lead carbonates and sulfates Lead and Lead compounds Mercuric Oxide Batteries Nickel finishes must not be used on the external surface designed to be frequently handled or carried by the user. Ozone Depleting Substances Polybrominated Biphenyls (PBBs) Polybrominated Biphenyl Ethers (PBBEs) Polybrominated Biphenyl Oxides (PBBOs) Polychlorinated Biphenyl (PCB) Polychlorinated Terphenyls (PCT) Polyvinyl Chloride (PVC) except for wires and cables, and certain retail packaging has been voluntarily removed from most applications. Radioactive Substances Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO) HP follows these guidelines to decrease the environmental impact of product packaging:

Options

Eliminate the use of heavy metals such as lead, chromium, mercury and cadmium in packaging materials. Eliminate the use of ozone-depleting substances (ODS) in packaging materials. Design packaging materials for ease of disassembly. Maximize the use of post-consumer recycled content materials in packaging materials. Use readily recyclable packaging materials such as paper and corrugated materials. Reduce size and weight of packages to improve transportation fuel efficiency. Plastic packaging materials are marked according to ISO 11469 and DIN 6120 standards. End-of-life Hewlett-Packard offers end-of-life HP product return and recycling Management and programs in many geographic areas. To recycle your product, please Recycling go to: www.hp.com/recycle or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. Hewlett-Packard For more information about HP's commitment to the environment: Corporate Global Citizenship Report Environmental www.hp.com/hpinfo/globalcitizenship/gcreport/index.html Information Eco-label certifications www.hp.com/hpinfo/globalcitizenship/ environment/productdesign/ecolabels.html ISO 14001 certificates: www.hp.com/hpinfo/globalcitizenship/ environment/operations/envmanagement.html HP Silver LCD Speaker Powered directly by the monitor or the PC, the Speaker Bar seamlessly BarPart number: attaches to the monitor's lower bezel to bring full audio support to

Page 5

EE418AA
VGA to DVI-I cable connects the graphic card's VGA connector to the monitor's input #1 or 2 (DVI-I analog) connector. DVI-D to DVI-D cable connects the graphic card's DVI-D digital connector to the monitor's input #1 or #2 (DVI-I digital) connector. Software HP Display Assistant Utility makes it possible to adjust displays settings through the PC using two-way communication via DDCI. HP Display Lite Saver allows ability to power up and down display at predetermined hours of the day to safe power and backlight life. Pivot Pro software from Portrait Displays, Inc. interacts with your PC's native graphics driver to enable seamless portrait screen redraws with a simple mouse-click or keyboard command. Pivot Pro supports 90degree portrait and landscape views. Language support is available in English, Japanese, French, German, Spanish, Italian, and Traditional and Simplified Chinese. User Guide Languages English, B. Portuguese, French, LA Spanish, Korean, S. Chinese, T. Chinese, Bahasa, Japanese, Danish, Finnish, German, Norwegian, Spanish, Swedish, Greek, Polish, Russian, Slovenian, Turkish Warranty Languages English, Canadian French, LA Spanish, Brazilian Portuguese, Danish, German, Castilian Spanish, French, Italian, Dutch, Norwegian, Finnish, Swedish, Bahasa Indonesian, Korean, T. Chinese, S. Chinese Color Carbonite/silver VESA External Yes (Standard 4 hole pattern, 100 mm) Mounting Security Lock-Ready Yes Certification and Australian ACA Approval, Canadian Requirements/CSA, CE Marking, China CCC Approval, Compliance CISPR Requirements, Eastern European Approvals, ENERGY STAR qualified, FCC Approval, German Ergonomic (TUV and GS Mark), ISO 13406-2 Pixel Defect Guidelines, Mexican NOM Approval, MIC Requirements (New Zealand), PC99 Certified, S. Korean MIC Approval, Taiwan BSMI Approval, TCO 03 (emissions, ergonomics, environment), TUV-Ergo, UL Listed, VCCI Approvals, Microsoft Windows Certification (Microsoft Windows 98, Microsoft Windows 2000, Microsoft Windows XP, and Windows Vista), EPEAT Silver Compatibility Compatible with platforms using the VESA standard video modes. Recommended for use with HP products. Service and Warranty Three years parts, labor, and on-site service. 24-hour, 90-day, toll-free technical support. Replacement options may include second business day on-site service, or next business day direct replacement, at HP's sole discretion.3 With direct replacement, HP will ship a replacement display product directly to you. Using the prepaid shipping labels provided, return your failed display to HP in the same packaging as the replacement. Certain restrictions and exclusions apply. For details see your product warranty or contact HP Customer Support. 1 All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. 2 Response time: 8 ms (gray to gray); 16 ms (rise and fall). 3 Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts from date of hardware purchase. Restrictions and limitations apply. HP Care Pack Services extend service contracts beyond the standard warranties. To choose the right level of service for your HP product, use the HP Care Pack Services Lookup Tool at: www.hp.com/go/lookuptool. Additional HP Care Pack Services information by product is available at:

HP Security LockPart number PC766A Accessories Included
select HP flat panel monitors. Features include dual speakers with full sound range and external jack for headphones. Sold separately. For more information, refer to the HP Silver LCD Speaker Bar QuickSpec. Combines aircraft-grade steel and Kevlar fiber to securely lock down your monitor and help prevent theft.

Page 6

www.hp.com/hps/carepack.

Page 7

Overview - HP LCD Monitor Quick Release
1. Release/locking 2. Four 100 mm VESA mount screw holes 3. Mounting holes for attachment to back of HP LP1965, LP2065, and HP LP2465 monitor stands
1. Four 100 mm VESA mount screw holes
1. Locking pin screw 2. Locking pin hole on release/locking arm

Introduction

The HP Quick Release, which ships standard with the HP LP2065 20-inch LCD Monitor, is an easy to use, 100 mm VESAcompliant, flat panel monitor mounting solution that allows you to quickly and securely attach a flat panel monitor to a variety of stands, brackets, arms or wall mounts. HP Quick Release can also be used for mounting any combination of devices that are compatible with the 100 mm VESA Flat Display Mounting Interface Standard. The failsafe "Sure-Lock" mechanism snaps the monitor (or mounted device) securely in place, and can be further secured with a theft-deterrent security screw.
Uniquely flexible product configurations
HP Quick Release enables uniquely flexible product configuration alternatives in a variety of settings, such as: Storefronts/kiosks: Mount flat panel monitors for easy viewing and add touchscreens for interactivity. Trade shows: Securely mount LCD TVs or monitors in common areas and quickly remove them for safekeeping at the end of the day. Front office environments: Minimize desk space requirements with wall or swing-arm mounting of monitors in reception areas. Training labs: Mount a monitor directly on a 100 mm VESA-compatible PC or an HP Compaq Thin Client for all-in-one convenience. Medical/institutional settings: Securely mount monitors in nursing stations and public areas. Conference rooms: Mount projectors (with 100 mm VESA-compliant pre-drilled holes) on ceilings, and monitors on walls or tables.

Page 8

Technical Specifications - HP LCD Monitor Quick Release
Mechanical Dimensions (H x W x D)

Additional components

Color Notes
Supported weight capacity
Packaged 7.8 x 6.25 x 1.5 in (19.8 x 15.9 x 3.8 cm) Unpackaged 6.3 x 5.2 x 0.65 in (16 x 13.2 x 1.65 cm) Weight Packaged 1.1 lb (0.49 kg) Unpackaged 0.82 lb (0.37 kg) Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts) Eight 15.5 mm mounting screws (for attachment to HP Thin Client products) Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands) One Quick Release "locking" screw Carbonite 1. No HP monitors allow positioning of a thin client product between a monitor screen and its stand. 2. The Quick Release device is not to be used between a monitor screen and its stand unless provided that way from the factory. 3. Under no circumstances is the Quick Release device intended to be used in an orientation where the Release/Lock lever is oriented downward. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) depending upon the mounting configuration used. Please note this is a total weight limit for all devices mounted, i.e. the combined weight of the monitor and a second device such as an HP Thin Client cannot exceed 24 pounds. Because mounting surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting solution is properly installed to support applied loads.
Copyright 2008 Hewlett-Packard Development Company, L.P. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. ENERGY STAR is a registered mark owned by the U.S. government. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

QuickSpecs

Overview

HP LP2065 20-inch LCD Monitor
1. Opens, selects or exits the OSD menu. 2. Navigates backward through the OSD menu and decreases adjustment levels. When the OSD menu is inactive, activates the auto-adjustment feature to optimize the screen image. 3. Navigates forward through the OSD menu and increases adjustment levels.
4. Selects video input, DVI-I#1 or DVI-I#2. 5. Turns the monitor on or off.

Models

Workstation Volume Channel EF227A4-#xxx

DA - 12377

Worldwide Version 13 December 15, 2008

Page 1

Technical Specifications
Panel Type Viewable Image Area (diagonal) Screen Opening (WxH) Panel Type Aspect Ratio Viewing Angle (typical)1 Brightness (typical)1 Contrast Ratio (typical)1 Response Time (typical)1 Pixel Pitch Color Gamut Backlight Lamp Life (to half brightness) Bezel Width On Screen Display (OSD) Buttons or Switches Controls Languages User Controls 20.1 in (51 cm)
20-inch Active Matrix TFT (thin film transistor)
16.2 x 12.17 in (40.8 x 30.6 cm) IPS 4:horizontal/178 vertical (10:1 minimum contrast ratio) 300 nits (cd/m2) 800:ms2 0.255 mm 72% 45K hours 16 mm OSD menu select, auto adjust/OSD up, OSD down Input select, power English, French, German, Spanish, Italian, Dutch, and Japanese Brightness, contrast, positioning, color temperature, individual color control, serial number display, full screen resolutions, clock, clock phase, input selection, image control (including scaling), and factory reset 30 to 94 kHz (VGA input); 30 to 92 KHz (DVI input for modes with pixel clock less than 162 MHz) 48 to 85 Hz (VGA input); 48 to 85 Hz (DVI input for modes with pixel clock less than 162 MHz) 1600 x 1200 @ 60 Hz (recommended) 1600 x 1200 @ 60 Hz, 75 Hz (analog input) 1280 x 1024 @ 60 Hz, 75 Hz, and 85 Hz 1280 x 960 @ 60 Hz 1152 x 900 @ 66 Hz 1024 x 768 @ 60 Hz, 75 Hz, and 85 Hz 800 x 600 @ 60 Hz, 85 Hz 640 x 480 @ 60 Hz, 75 Hz, and 85 Hz
Signal Interface/ Performance
Horizontal Frequency Vertical Frequency Native Resolution Preset VESA Graphic Modes (non-interlaced)

Text Mode Mac Mode

720 x 400 @ 70 Hz 1152 x 870 @ 75 Hz and 832 x 624 @ 75 Hz

Page 2

Sun Mode Maximum Pixel Clock Speed User Programmable Modes Anti-Glare Anti-Static Video/Other Inputs Plug and Play Self Powered USB 2.0 Hub Input Signal Input Impedance Sync Input Video Cable Video Cable Length Power Input Power Frequency Typical Power Consumption Maximum Power Saving Power Cable Length Mechanical Dimensions (H x W x D) 1152 x 900 @ 66 Hz
202 MHz (analog input); 162 MHz (DVI input) Yes, 10 Yes Yes Yes One upstream, four downstream ports (cable included) Two DVI-I connectors (dual VGA analog or dual digital input possible) 75 ohms 10% Separate sync (HSYNC/VSYNC); composite sync, Sync on Green Two VGA to DVI-I; two DVI-D to DVI-I 6.5 ft (1.98 m) Auto-Ranging, 90 ~ 265 VAC; internal power supply, 50 Hz/60 Hz 47.5 to 63 Hz 55 watts (without USB ports); 70 watts (USB ports fully loaded) < 75 watts < 2 watts 5.9 ft (1.8 m) Unpacked w/ stand Unpacked w/o stand (head only) Packaged 16.7 to 21.8 x 17.4 x 8.67 in (42.5 to 55.5 x 44.3 x 22.0 cm) 13.58 x 17.4 x 3.42 in (34.5 x 44.3 x 8.7 cm) 11.77 x 22.2 x 16.77 in (29.9 x 56.4 x 42.6 cm) With stand: 20.28 lb (9.2 kg); Without stand: 12.65 lb (5.75 kg) 26.3 lb (11.95 kg)

Default Color Temperature 6500 K

Weight

Unpacked Packaged
Tilt Range Swivel Range Height Adjustable Pivot Rotation Base Environmental
-5 to + 25 vertical tilt -45 to + 45 Yes, range 5.1 in (13.0 cm) Yes Detachable, ships detached
Temperature Operating 41 to 95 F (5 to 35 C)

Page 3

Temperature Non-operating Humidity Operating Humidity Non-operating Altitude Operating Altitude Non-operating Environmental Data Eco-Label Certifications and Declarations 6 to 140 F (-10 to 60 C) 20% to 80% non-condensing 20% to 80% +12,000 ft (3657.6 m) +40,000 ft (12,192 m)
This product has received or is in the process of being certified to the following approvals and may be labeled with one or more of these marks: ENERGY STAR IT ECO declaration TCO 03 EPEAT Silver
Energy Consumption (in accordance with ENERGY STAR test method) Sleep Off Heat Dissipation* Sleep Off
AC Input Voltage at 100 AC Input Voltage at 115 AC Input Voltage at 230 VAC +/- 5 VAC, 50 Hz VAC +/- 5 VAC, 60 Hz VAC +/- 5 VAC, 50 Hz +/- 3 Hz +/- 3 Hz +/- 3 Hz 39.2 watts 0.9 watts 0.9 watts 115 VAC, 60 Hz 134 BTU/hr 3.07 BTU/hr 1.70 BTU/hr 38.8 watts 1.1 watts 1.1 watts 230 VAC, 50 Hz 132 BTU/hr 3.75 BTU/hr 2.38 BTU/hr
Normal Operation 39.5 watts 0.9 watts 0.9 watts 100 VAC, 50 Hz 3.07 BTU/hr 1.70 BTU/hr
Normal Operation 135 BTU/hr
* Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour. Longevity and Upgrading Upgradeability features contained in the product include: One upstream and four downstream USB ports Ergonomics Additional Information The monitor meets the ergonomic requirement of EN-ISO 13406-2 for flat panel displays. This product is in compliance with the Restrictions of Hazardous Substances (RoHS) Directive, 2002/95/EC. This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE) Directive, 2002/96/EC. This product is in compliance with California Proposition 65 (State of California; Safe Drinking Water and Toxic Enforcement Act of 1986). This product is in compliance with the IEEE 1680 (EPEAT) standard at the Silver level, see www.epeat.net.

Page 4

Plastics parts weighing over 25 grams used in the product are marked per ISO 11469 and ISO1043. Display meets the requirement for low frequency electromagnetic fields per TCO and prEN50279 A/B/C. This product contains 0% recycled materials (by wt.) This product is 97.8% recyclable when properly disposed of at end of life (8020/7801). Packaging Materials Corrugated Carton HDPE Bag Polystyrene Material Usage 11 kg 0.065 kg 0.535 kg
This product does not contain any of the following substances in excess of regulatory limits (refer to the HP General Specification for the Environment at www.hp.com/hpinfo/globalcitizenship/ environment/supplychain/gen_specifications.html): Asbestos Certain Azo Colorants Certain Brominated Flame Retardants may not be used as flame retardants in plastics Cadmium Chlorinated Hydrocarbons Chlorinated Paraffins Formaldehyde Halogenated Diphenyl Methanes Lead carbonates and sulfates Lead and Lead compounds Mercuric Oxide Batteries Nickel finishes must not be used on the external surface designed to be frequently handled or carried by the user. Ozone Depleting Substances Polybrominated Biphenyls (PBBs) Polybrominated Biphenyl Ethers (PBBEs) Polybrominated Biphenyl Oxides (PBBOs) Polychlorinated Biphenyl (PCB) Polychlorinated Terphenyls (PCT) Polyvinyl Chloride (PVC) except for wires and cables, and certain retail packaging has been voluntarily removed from most applications. Radioactive Substances Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)

Packaging

HP follows these guidelines to decrease the environmental impact of product packaging:

Page 5

Eliminate the use of heavy metals such as lead, chromium, mercury and cadmium in packaging materials. Eliminate the use of ozone-depleting substances (ODS) in packaging materials. Design packaging materials for ease of disassembly. Maximize the use of post-consumer recycled content materials in packaging materials. Use readily recyclable packaging materials such as paper and corrugated materials. Reduce size and weight of packages to improve transportation fuel efficiency. Plastic packaging materials are marked according to ISO 11469 and DIN 6120 standards. End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return and recycling programs in many geographic areas. To recycle your product, please go to: www.hp.com/recycle or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.
For more information about HP's commitment to the environment: Hewlett-Packard Corporate Environmental Global Citizenship Report www.hp.com/hpinfo/globalcitizenship/gcreport/index.html Information Eco-label certifications www.hp.com/hpinfo/globalcitizenship/ environment/productdesign/ecolabels.html ISO 14001 certificates: www.hp.com/hpinfo/globalcitizenship/ environment/operations/envmanagement.html Options HP Silver LCD Speaker BarPart number: EE418AA Powered directly by the monitor or the PC, the Speaker Bar seamlessly attaches to the monitor's lower bezel to bring full audio support to select HP flat panel monitors. Features include dual speakers with full sound range and external jack for headphones. Sold separately. For more information, refer to the HP Silver LCD Speaker Bar QuickSpec. Combines aircraft-grade steel and Kevlar fiber to securely lock down your monitor and help prevent theft. VGA to DVI-I cable connects the graphic card's VGA connector to the monitor's input #1 or 2 (DVI-I analog) connector. DVI-D to DVI-D cable connects the graphic card's DVI-D digital connector to the monitor's input #1 or #2 (DVI-I digital) connector. Software HP Display Assistant Utility makes it possible to adjust displays settings through the PC using two-way communication via DDCI. HP Display Lite Saver allows ability to power up and down display at predetermined hours of the day to safe power and backlight life.

HP Security LockPart number PC766A Other Accessories Included

Page 6

Pivot Pro software from Portrait Displays, Inc. interacts with your PC's native graphics driver to enable seamless portrait screen redraws with a simple mouse-click or keyboard command. Pivot Pro supports 90-degree portrait and landscape views. Language support is available in English, Japanese, French, German, Spanish, Italian, and Traditional and Simplified Chinese. User Guide Languages English, B. Portuguese, French, LA Spanish, Korean, S. Chinese, T. Chinese, Bahasa, Japanese, Danish, Finnish, German, Norwegian, Spanish, Swedish, Greek, Polish, Russian, Slovenian, Turkish English, Canadian French, LA Spanish, Brazilian Portuguese, Danish, German, Castilian Spanish, French, Italian, Dutch, Norwegian, Finnish, Swedish, Bahasa Indonesian, Korean, T. Chinese, S. Chinese Carbonite/silver Yes (Standard 4 hole pattern, 100 mm) Yes

Warranty Languages

Color VESA External Mounting Security Lock-Ready Certification and Compliance
Australian ACA Approval, Canadian Requirements/CSA, CE Marking, China CCC Approval, CISPR Requirements, Eastern European Approvals, ENERGY STAR qualified, FCC Approval, German Ergonomic (TUV and GS Mark), ISO 13406-2 Pixel Defect Guidelines, Mexican NOM Approval, MIC Requirements (New Zealand), PC99 Certified, S. Korean MIC Approval, Taiwan BSMI Approval, TCO 03 (emissions, ergonomics, environment), TUV-Ergo, UL Listed, VCCI Approvals, Microsoft Windows Certification (Microsoft Windows 98, Microsoft Windows 2000, Microsoft Windows XP, and Windows Vista), EPEAT Silver Compatible with platforms using the VESA standard video modes. Recommended for use with HP products. Three years parts, labor, and on-site service. 24-hour, 90-day, toll-free technical support. Replacement options may include second business day on-site service, or next business day direct replacement, at HP's sole discretion.3 With direct replacement, HP will ship a replacement display product directly to you. Using the prepaid shipping labels provided, return your failed display to HP in the same packaging as the replacement. Certain restrictions and exclusions apply. For details see your product warranty or contact HP Customer Support.

Compatibility Service and Warranty
All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. 2 Response time: 8 ms (gray to gray); 16 ms (rise and fall). 3 Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts from date of hardware purchase. Restrictions and limitations apply. HP Care Pack Services extend service contracts beyond the standard warranties. To choose the right level of service for your HP product, use the HP Care Pack Services Lookup Tool at: www.hp.com/go/lookuptool. Additional HP Care Pack Services information by product is available at: www.hp.com/hps/carepack.

Page 7

Overview - HP LCD Monitor Quick Release
1. Release/locking 1. Four 100 mm VESA mount screw holes 1. Locking pin screw 2. Four 100 mm VESA mount screw holes 2. Locking pin hole on release/locking arm 3. Mounting holes for attachment to back of HP LP1965, LP2065, and HP LP2465 monitor stands

Introduction

The HP Quick Release, which ships standard with the HP LP2065 20-inch LCD Monitor, is an easy to use, 100 mm VESA-compliant, flat panel monitor mounting solution that allows you to quickly and securely attach a flat panel monitor to a variety of stands, brackets, arms or wall mounts. HP Quick Release can also be used for mounting any combination of devices that are compatible with the 100 mm VESA Flat Display Mounting Interface Standard. The failsafe "Sure-Lock" mechanism snaps the monitor (or mounted device) securely in place, and can be further secured with a theft-deterrent security screw.
Uniquely flexible product configurations
HP Quick Release enables uniquely flexible product configuration alternatives in a variety of settings, such as: Storefronts/kiosks: Mount flat panel monitors for easy viewing and add touchscreens for interactivity. Trade shows: Securely mount LCD TVs or monitors in common areas and quickly remove them for safekeeping at the end of the day. Front office environments: Minimize desk space requirements with wall or swing-arm mounting of monitors in reception areas. Training labs: Mount a monitor directly on a 100 mm VESA-compatible PC or an HP Compaq Thin Client for all-in-one convenience.

Page 8

Medical/institutional settings: Securely mount monitors in nursing stations and public areas. Conference rooms: Mount projectors (with 100 mm VESA-compliant pre-drilled holes) on ceilings, and monitors on walls or tables.

Page 9

Technical Specifications - HP LCD Monitor Quick Release
Mechanical Dimensions (H x W x D) Weight Additional components Packaged Unpackaged Packaged Unpackaged
7.8 x 6.25 x 1.5 in (19.8 x 15.9 x 3.8 cm) 6.3 x 5.2 x 0.65 in (16 x 13.2 x 1.65 cm) 1.1 lb (0.49 kg) 0.82 lb (0.37 kg)
Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts) Eight 15.5 mm mounting screws (for attachment to HP Thin Client products) Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands) One Quick Release "locking" screw Carbonite 1. No HP monitors allow positioning of a thin client product between a monitor screen and its stand. 2. The Quick Release device is not to be used between a monitor screen and its stand unless provided that way from the factory. 3. Under no circumstances is the Quick Release device intended to be used in an orientation where the Release/Lock lever is oriented downward.

Color Notes

Supported weight capacity
The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) depending upon the mounting configuration used. Please note this is a total weight limit for all devices mounted, i.e. the combined weight of the monitor and a second device such as an HP Thin Client cannot exceed 24 pounds. Because mounting surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting solution is properly installed to support applied loads.
Copyright 2008 Hewlett-Packard Development Company, L.P. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. ENERGY STAR is a registered mark owned by the U.S. government. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.