Reviews & Opinions
Independent and trusted. Read before buy HP L1940T 19-inch Lcd Monitor!

HP L1940T 19-inch Lcd Monitor

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
HP L1940T 19-inch Lcd Monitor, size: 1.0 MB
Related manuals
HP L1940T 19-inch Lcd Monitor Annexe 1

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

HP L1940T 19-inch Lcd Monitor19quot; HP L1940T DVI Rotating LCD Monitor w/USB 2.0 Hub (Silver/Bla


Details
Brand: HP
Part Numbers: L1940T-R, L1940TR
UPC: 683728202774


Here you can find all about HP L1940T 19-inch Lcd Monitor, for example manual and review. You can also write a review.

 

[ Report abuse or wrong photo | Share your HP L1940T 19-inch Lcd Monitor photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
ccos2308 10:31pm on Saturday, August 28th, 2010 
I bought the monitor two years ago and still lovin it. i had setup the screen portrait and the image is 40% more. it is a great product.
steko 4:28am on Friday, March 19th, 2010 
I bought the monitor two years ago and still lovin it. I bought the monitor two years ago and still lovin it. i had setup the screen portrait and the image is 40% more. it is a great product.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Cables..... 32
Declaration of Conformity for Products Marked with the FCC Logo (United States Only).. 32

Canadian Notice.... 33

Avis Canadien.... 33
European Union Regulatory Notice.... 33
German Ergonomics Notice.... 34

Japanese Notice.... 34

Korean Notice..... 34
Power Cord Set Requirements.... 34
Japanese Power Cord Requirements... 34
Product Environmental Notices.... 35
Materials Disposal.... 35
Disposal of Waste Equipment by Users in Private Household in the European Union.. 35
Restriction of Hazardous Substances (RoHS).. 35
Appendix D LCD Monitor Quality and Pixel Policy

Product Features

HP L1940T
The flat panel monitor has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: Large 19-inch (48.3 cm) viewable area display with narrow bezels native resolution, plus full-screen support for lower resolutions Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side Pivot capability to rotate display to portrait mode Tilt, swivel, and height adjustment capabilities Easily removable base for flexible panel mounting with the optional HP Flat Panel Monitor Quick Release or other panel mounting solutions Video inputs that support DVI digital signal (available on select models) and VGA analog inputs One power cable and one VGA signal cable included USB 2.0 hub with one upstream (connects to the computer or to a USB hub) and two downstream (connects to USB devices) ports Accessory rail on monitor to accept optional mounted devices, such as an HP speaker bar Plug and play capability if supported by the system On-Screen Display (OSD) adjustments in English, Dutch, French, German, Italian, Simplified Chinese, and Spanish for easy setup and screen optimization Software and documentation CD that includes HP Display Assistant, Pivot Pro software, monitor driver software, and product documentation Energy Saver feature for Energy Star compliance Intelligent Management Asset Control Compliant with the following regulated specifications: European Union CE Directives Swedish MPR II 1990 Swedish TCO Requirements Energy Star

Safety and Maintenance Guidelines
Important Safety Information
A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements section in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding feature. The grounding plug is an important safety feature. Plug the power cord in a grounded (earth) outlet that is easily accessible at all times. Disconnect power from the product by unplugging the power cord from the electrical outlet. For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug. To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation, setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and/or on the documentation CD, if one is included with the monitor. CAUTION For the protection of the monitor, as well as the computer, connect all power cords for the computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacement Policy so you can replace the equipment, if surge protection fails.

Maintenance Guidelines

To enhance the performance and extend the life of the monitor: Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/ back plate of the monitor.

Figure 3-1 Unfolding the Pedestal Base
Chapter 3 Setting Up the Monitor

Rear Components

Figure 3-2 Rear Components
Component AC Power Connector USB Downstream Connectors USB Upstream Connector DVI-D Connector (select models) VGA Connector Function Connects the AC power cord to the monitor. Connects optional USB devices to the monitor.
Connects the monitor USB hub to a host USB port/hub.
Connects the DVI-D signal cable to the monitor.
Connects the VGA signal cable to the monitor.
Selecting the Signal Connectors and Cables
The monitor features one DVI-D connector and one VGA connector capable of supporting either digital or analog input. The video mode is determined by the connector and video cable used. For digital operation, use an optional DVI-D signal cable. Connect the DVI-D signal cable to a DVI D connector on the monitor (1) and the other end to the DVI-D connector on the computer (2). For analog operation, use the VGA signal cable provided. Connect the VGA signal cable to a VGA connector on the monitor (1) and the other end to the VGA connector on the computer (2).
The monitor will automatically determine which inputs have valid video signals. The inputs can be selected through the On-Screen Display (OSD) feature by pressing the Menu button on the front panel or by pressing the + button to enable VGA signal input or the button to enable DVI signal input.
Figure 3-3 Connecting the DVI-D Signal Cable (not included with monitor)
Figure 3-4 Connecting the VGA Signal Cable

Connecting the Monitor

1. 2. Place the monitor in a convenient, well-ventilated location near the computer. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer (2) or to a USB hub, and the other end to the upstream USB connector on the monitor (1).
Figure 3-5 Connecting the USB Hub Cable (not included with monitor) WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the equipment by unplugging the power cord from the electrical outlet. For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.

Connect one end of the power cable to the AC power connector on the back of the monitor (1), and the other end to an electrical wall outlet (2).
Figure 3-6 Connecting the Power Cable

Adjusting the Monitor

1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level.
Figure 3-7 Tilting the Monitor
Swivel the monitor to the left or right for the best viewing angle.
Figure 3-8 Swiveling the Monitor 3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position. CAUTION To prevent damage to the monitor, be sure not to lower it onto objects in the pedestal base tray.
Figure 3-9 Adjusting the Height
Pivot the monitor from landscape to portrait orientation viewing to adapt to your application.
Figure 3-10 Pivoting the Monitor NOTE The monitor pivots from landscape clockwise to portrait orientation. To view information on the screen in portrait mode, you will need to install the Pivot Pro software included on the software and documentation CD.

Turning on the Monitor

1. 2. Press the power switch to turn on the computer. Press the power button on the front of the monitor. CAUTION Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens. * A prolonged period of time is 12 or more consecutive hours of non-use.

Mounting Solutions

Removing the Monitor Pedestal Base
You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm, or other mounting fixture. CAUTION Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. If the monitor has a connected audio cable, disconnect it. 1. 2. Disconnect and remove the signal and power cables from the back of the monitor. Lay the monitor face down on a soft area to prevent it from getting scratched, defaced, or broken.

Remove the four screws (1) that attach the pedestal base to the back of the monitor panel, and lift the pedestal base off (2).
Figure 3-11 Removing the Monitor from the Pedestal Base

Mounting the Monitor

An optional HP Quick Release can be attached to the monitor panel. It allows you to quickly and securely attach the monitor panel to the mounting fixture. 1. Remove the monitor panel from the pedestal base. Refer to Removing the Monitor Pedestal Base steps in the previous section.
To mount the monitor to a swing arm, wall or other mounting fixture using the HP Quick Release, follow the instructions provided in the documentation that comes with Quick Release.
Figure 3-12 Mounting the Monitor to a Swing Arm Using Quick Release
Figure 3-13 Mounting the Monitor to the Wall Using Quick Release CAUTION The Quick Release is designed to support a maximum of up to 24 lbs. (10.9 kg). If you are mounting to a wall, HP recommends that you consult with a qualified engineering, architectural, or construction professional to determine the appropriate type and quantity of mounting fasteners required for the application and to ensure that the mounting solution is properly installed to support applied loads.
If mounting the monitor using another manufacturers solution, use the screws (1) previously removed from the monitor base to mount the display (2) to a swing arm or other mounting fixture. Consult the documentation included with the mounting fixture for additional instructions. CAUTION This monitor supports the VESA industry-standard 100mm mounting holes. To attach a third-party mounting solution to the monitor, four 4mm, 0.7 pitch, and 10mm long screws are required (not provided with the monitor). Longer screws should not be used because they may damage the monitor. It is important to verify that the manufacturers mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor display panel. For best performance, it is important to use the power and video cables provided with the monitor.
Figure 3-14 Mounting the Monitor Using a Third-Party Solution
Locating the Rating Labels
The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels (1) are located on the rear panel of the monitor display head.
Figure 3-15 Locating the Rating Labels

Operating the Monitor

Software and Utilities
The CD that comes with the monitor contains files you can install on the computer: an.INF (Information) file an.ICM (Image Color Matching) file auto-adjustment pattern utility additional software for the monitor model

Using the Auto-Adjustment Function
You can optimize the screen performance for the VGA (analog) input by using the Auto Adjust button on the monitor and the auto-adjustment pattern software utility on the CD provided. Do not use this procedure if the monitor is using a DVI input. If the monitor is using a VGA (analog) input, this procedure can correct the following image quality conditions: Fuzzy or unclear focus Ghosting, streaking or shadowing effects Faint vertical bars Thin, horizontal scrolling lines An off-center picture
To use the auto-adjustment feature: 1. 2. Allow the monitor to warm up for 20 minutes before adjusting. Press the Auto Adjust button on the monitor front panel. 3. 4. 5. 6. You can also press the Menu button, then select Auto-Adjustment from the OSD Main Menu. Refer to Adjusting the Monitor Settings in this chapter. If the result is not satisfactory, continue with the procedure.
Insert the CD in the disc drive. The CD menu is displayed. Select Open Auto-Adjustment Software. The setup test pattern is displayed. Press the Auto Adjust button on the monitor front panel to produce a stable, centered image. Press the ESC key or any other key on the keyboard to exit the test pattern.

Front Panel Controls

Table 4-1 Monitor Front Panel Controls
Control 3 Auto Adjust Menu (Minus) Function Activates the auto adjustment feature for optimum image. Opens, selects or exits the OSD menu. 5 Power If OSD is on, press to navigate backward through the OSD menu features and decrease adjustment levels. If OSD is off, press to enable the DVI signal input (available on select models) If OSD is on, press to navigate forward through the OSD menu features and increase adjustment levels. If OSD is off, press to enable the VGA signal input.

+ (Plus)

Turns the monitor on or off.
Adjusting the Monitor Settings
The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display Assistant utility.
Using the On-Screen Display Menu
Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To access the OSD, do the following: 1. 2. If the monitor is not already on, press the Power button to turn on the monitor. To access the OSD Menu, press the Menu button on the monitors front panel.

3. 4. 5. 6.

To navigate through the OSD Menu, press the + (Plus) button on the monitors front panel to scroll up, or the (Minus) button to scroll in reverse. To select an item from the OSD Menu, use the + or buttons to scroll to and highlight your selection, then press the Menu button to select that function. Adjust the item using the + or buttons on the front panel to adjust the scale. After adjusting the function, select Save and Return, or Cancel if you dont want to save the setting, then select Exit from the Main Menu. NOTE If the buttons remain untouched for 10 seconds while displaying a menu, new adjustments will be discarded and the settings will revert to previous settings and exit the menu.

Using the HP Display Assistant Utility
HP Display Assistant, included on the software and documentation CD, is a software utility that guides you through the tuning process with easy to understand instructions and background patterns designed for each monitor control. It provides: Accurate screen calibration through the use of step-by-step instruction Wizards to obtain the best overall image quality Software control of the monitor image and color settings to eliminate dependence on the monitors front panel buttons and On-Screen Display (OSD) menu Defined preset display settings for each individual user in a multi-user environment Multiple preset display settings for a single user based on content and ambient lighting Asset Management and Power Management capabilities that include remote control for individual or a group of displays on the domain from a centralized console application
The HP Display Assistant Utility has two modes of operation: Wizard and OSD mode. The preferred method of use is Wizard mode, which takes you through a step-by-step process to accurately calibrate the monitor. This method relies on a sequence of steps that will obtain the best display results when completed. NOTE Refer to the HP Display Assistant user guide for additional information about the software.
Identifying Monitor Conditions
Special messages will appear on the monitor screen when identifying the following monitor conditions: Input Signal Out of RangeChange resolution setting to 75HzIndicates the monitor does not support the input signal because the resolution and/or refresh rate are set higher than the monitor supports No Input SignalIndicates the monitor is not receiving a video signal from the PC on the monitor video input connector. Check to determine if the PC or input signal source is off or in the power saving mode. Multiple Inputs are ActiveUse the OSD to select the desired video inputIndicates the monitor is connected to two video inputs. The monitor is trying to display both inputs, but after 10 seconds the monitor uses the default signal input. Auto Adjustment is in ProgressIndicates the auto-adjustment function is active Monitor Going to SleepIndicates the screen display is entering a sleep mode Check Video CableIndicates the video cable is not properly connected to the computer OSD LockThe OSD can be enabled or disabled by pressing and holding the Menu button on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lock-Out is displayed for ten seconds. If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD. If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.

Sleep Timer Mode

The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to power on and off at the same time every day. This also extends the life of the backlight bulbs in the monitor. The Sleep Timer has five settings: Set Current Time Set Sleep Time Set On Time Timer: On/Off Sleep Now

To set the timer:

1. 2. 3. 4. Press the Menu button on the monitor front panel to display the Advanced Menu. Scroll down and highlight Management. Press the Menu button to select Management. Scroll down and highlight and select Sleep Timer > Set Current Time.
NOTE You must set the current local time before you reset the time for Sleep Time or On Time. Note that the time is displayed in a 24hour clock format. For example, 1:15 p.m. is displayed as 13 hours 15 minutes. 5. 6. 7. 8. 9. Press the Menu button once to enter the adjustment mode for hours. Press the (Minus) or + (Plus) button to adjust the hour. Press the Menu button again to enter the time for minutes. Press the (Minus) or + (Plus) button to adjust the minutes. Press the Menu button to lock in the time chosen.
10. After setting the current time, the highlight automatically skips to Set Sleep Time hours. Repeat steps 6 through 9 to set Sleep Time. 11. If you do not want to set Sleep Time, press the Menu button twice, then select Save and Return to exit the menu. 12. After setting Sleep Time, the highlight automatically skips to Set On Time hours. Repeat steps 6 through 9 to set On Time. 13. Set the Timer mode to On to activate the Sleep Timer settings. 14. When you are finished, select Save and Return to exit the menu. The fifth selection, Sleep Now, turns the monitor backlights off immediately and stays in sleep mode until the next On Time activates or a monitor button is pressed.

HP Display LiteSaver

HP Display LiteSaver is a software application, available on the CD, that increases monitor life and saves energy. It allows you to place the monitor into its low power sleep mode at predefined times by shutting down or reducing power to most internal circuits. This helps protect the LCD panel against image retention. Image retention can occur when the monitor is left on while displaying the same image for an extended period of time, leaving a shadow of the image on the screen.
Installing the HP Display LiteSaver Software
1. 2. 3. 4. Insert the CD in the computer CD-ROM Drive. The CD menu is displayed. Select Install HP Display LiteSaver Software. After installing the software, click the HP Display LiteSaver icon in the Windows system tray or right-click the icon and select Configure from the pop-up menu. Select the following options to configure the HP Display LiteSaver features:
Table 4-3 HP Display LiteSaver Configuration Options

Select This Option Enable Display LiteSaver To Do This Enables the HP Display LiteSaver functions; deselect to disable the HP Display LiteSaver
Table 4-3 HP Display LiteSaver Configuration Options (continued)
Select This Option Display Off To Do This Sets the time when the monitor automatically turns off. This does not affect screen saver operation, which has priority over the HP Display LiteSaver. Sets the time when the monitor automatically turns on. This does not affect screen saver operation, which has priority over the HP Display LiteSaver. Sets the time in minutes before the monitor turns off if there is any keyboard or mouse activity after the Display Off time is reached. If the keyboard or mouse is used, then HP Display LiteSaver waits until the set amount of time before turning the display off again. Set to 0 to disable. If disabled, the monitor will turn off as soon as the Display Off time is reached, regardless of keyboard or mouse activity. Displays a popup message in the system tray 1 minute before the monitor is turned off by HP Display LiteSaver Shows the time until the monitor is next due to be turned off by HP Display LiteSaver Stores the current settings and minimizes HP Display LiteSaver to the System Tray Restores the previous settings and minimizes HP Display LiteSaver to the System Tray. HP Display LiteSaver will continue to run. Opens the online help file Exits and closes the HP Display LiteSaver. It will no longer control the monitor power until it is next run.

Display On

Activity Extension
Show 1 minute Display Off Notice

Status OK Cancel

Help Exit
View HP Display LiteSaver Readme on the CD for additional information on how to configure HP Display LiteSaver.

sRGB Support

The monitor is designed to support sRGB for color management, which adapts to the color standards used in the image technology industry. To take advantage of the sRGB support, you need to change the monitors color temperature to sRGB and install the sRGB color profile (ICM) file. NOTE The sRGB color temperature preset improves the color accuracy of sRGB images on the computer monitor, but some color variation may still occur.
Changing the Color Temperature
1. 2. 3. 4. 5. Press the Menu button on the front panel of the monitor to launch the Main Menu of the OSD. Select Advanced Menu to access all options in the Main Menu. Select Color to display the Color Temperature menu. Select sRGB. Select Save and Return to exit the menu.
Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP

NOTE To complete the following procedure, you must be logged in as an administrator or a member of the administrators group. If the computer is connected to a network, network policy settings may prevent you from completing this procedure. The sRGB ICM file does not support Windows 95 and Windows NT operating systems. 1. 2. 3. 4. 5. 6. Click the Display icon in the Control Panel. In the Display Properties windows, select the Settings tab, then click the Advanced button. Select the Color Management tab, then click the Add button to open the Add Profile Association dialog box. Select the sRGB Color Space Profile.icm file, then click the Add button To activate a color profile for the monitor, you must set it as the Default Monitor Profile. Select sRGB Color Space Profile, then click Set as Default button. Click Apply or OK.

Troubleshooting

Solving Common Problems
The following table lists possible problems, the possible cause of each problem, and the recommended solutions.
Problem Screen is blank. Possible Cause Power cord is disconnected. Power switch on front panel of the monitor is turned off. Master power switch on rear panel of the monitor is turned Off. Video cable is improperly connected. Screen blanking is active. Solution Connect the power cord. Press the front panel power button.
Turn the master power switch to On.
Connect the video cable properly. Refer to Chapter 3, Setting Up the Monitor for more information. Press any key on the keyboard or move the mouse to inactivate the screen blanking utility. Press the (Minus) button on the front panel. If this does not correct the image, press the Menu button to open the Basic OSD Menu, and adjust the brightness and contrast scales as needed. Press the Menu button to access the OSD menu. Select Image Control/Horizontal Position or Vertical Position to adjust the horizontal or vertical position of the image. Connect the DVI-D signal cable to the DVI-D connector on the computer, or the VGA signal cable to the VGA connector on the computer. Be sure that the computer power is off while connecting the video cable. Restart the computer and enter Safe Mode. Change the settings to a supported setting (see Table B-2 L1940T Model Factory Preset Modes ). Restart the computer so that the new settings take effect. The default Activity Extension value is set to 10 minutes. The HP Display LiteSaver will wait to detect no input or movement from the keyboard or mouse for 10 consecutive minutes after the Display Off time has passed, before the monitor enters into low-power mode. For example, if the Display Off time is set to 5 minutes from the current time and the Activity Extension is set to 10 minutes, the HP Display LiteSaver will not actually turn off the display until 10 minutes of inactivity has elapsed, even though the Display Off time is 5 minutes from now.

Image appears blurred, indistinct, or too dark.
Brightness and contrast are too low.

Image is not centered

Position may need adjustment.
Check Video Cable is displayed on screen.
Monitor video cable is disconnected.
Out of Range. Set Monitor to @ 60Hz is displayed on screen.
Video resolution and/or refresh rate are set higher than what the monitor supports.
HP Display LiteSaver doesn't turn off the monitor screen.
The Activity Extension time has not elapsed.

Problem

Possible Cause The HP Display LiteSaver may not be compatible with the computer system. Some notebook computers are not compatible and the monitor power can not be controlled.
Solution Confirm that the HP Display LiteSaver is compatible with the system. 1. Right-click on the HP Display LiteSaver icon in the system tray. Select Power Off Display from the menu.
The monitor screen should turn off if the system is compatible. To turn the monitor back on, wait 5 seconds and move the mouse. NOTE If the monitor did not turn off, then the computer graphics driver is not compatible with the HP Display LiteSaver software. The monitor is off but it did not seem to enter into a lowpower sleep mode. The monitor's power saving control is disabled. Check the monitor's OSD menu setting for power saving enable/disable controls. The control should be set to enable to allow the monitor to enter into low-power modes.

Using the Worldwide Web

For the online access to technical support information, self-solve tools, online assistance, community forums of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to http://www.hp.com/support
Preparing to Call Technical Support
If you cannot solve a problem using the trouble shooting tips in this section, you may need to call technical support. Have the following information available when you call: The monitor Monitor model number Serial number for the monitor Purchase date on invoice Conditions under which the problem occurred Error messages received Hardware configuration Hardware and software you are using
Appendix A Troubleshooting

Technical Specifications

NOTE All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP's component manufacturers' typical level specifications for performance and actual performance may vary either higher or lower.

L1940T 19 LCD Monitor

Table B-1 L1940T Specifications
Display Type Viewable Image Size Tilt Swivel Maximum Weight (Unpacked) Dimensions (include pedestal base) Height Depth Width Maximum Graphic Resolution Text Mode Dot Pitch Horizontal Frequency Vertical Refresh Rate (analog mode) Environmental Requirements Temperature 41 to 95 F 4 to 140 F 20 to 80% VAC, 50/60 Hz 5 to 35 C 20 to +60 C 18.8 inches 10.4 inches 16.3 inches (75 Hz) analog and digital modes 0.264 (H) 0.264 (W) mm 30 to 83 kHz 56 to 76 Hz 477 mm 265 mm 413 mm 19.0 inches TFT LCD 19inch diagonal 5 to to 90 18.5 lbs. 8.4 kg 48.3 cm 48.3 cm

Japanese Power Cord Requirements
For use in Japan, use only the power cord received with this product.

CAUTION

Do not use the power cord received with this product on any other products.
Product Environmental Notices

Materials Disposal

This HP product contains mercury in the fluorescent lamp in the display LCD that might require special handling at end-of-life. Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact the local authorities or the Electronic Industries Alliance (EIA) http://www.eiae.org.
Disposal of Waste Equipment by Users in Private Household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling or waste electrical and electronic equipment. The separate collection and recycling of the waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact the local city office, the household waste disposal service or the shop where you purchased the product.
Restriction of Hazardous Substances (RoHS)
A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950.
LCD Monitor Quality and Pixel Policy
The TFT monitor uses high-precision technology, manufactured according to HP standards, to guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the HP LCD. These imperfections are caused by one or more defective pixels or sub-pixels. A pixel consists of one red, one green, and one blue sub-pixel. A defective whole pixel is always turned on (a bright spot on a dark background), or it is always off (a dark spot on a bright background). The first is the more visible of the two. A defective sub-pixel (dot defect) is less visible than a defective whole pixel and is small and only visible on a specific background.

The HP display does not have more than: 3 bright dots. 5 dark dots. 5 total bright and dark dots. No more than two adjacent (less than 2.5 mm edge-to-edge) defective pixels.
To locate defective pixels, the monitor should be viewed under normal operating conditions, in normal operating mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (20 in). HP expects that, over time, the industry will continue to improve its ability to produce LCDs with fewer cosmetic imperfections and HP will adjust guidelines as improvements are made.
Appendix D LCD Monitor Quality and Pixel Policy

doc1

19-inch/48.3 cm viewable area display, with narrow bezels. native resolution, plus full-screen support for

lower resolutions.

Wide viewing angle to allow viewing from a sitting or
standing position, or moving side-to-side.
Tilt, swivel, and height adjustment capabilities. Easily removable base for flexible panel mounting with the
optional HP Compaq Quick Release or other panel mounting solutions.
Video signal inputs supported: VGA Analog DVI signal input (available on select models) VGA analog signal cable included. USB 2.0 hub with one upstream (connects to the computer)
and two downstream (connects to USB devices) ports.
USB cable included to connect the monitors USB ports to
the USB connector on the computer.
Mounting feature on bottom of monitor to accept an optional
HP Speaker Bar accessory kit.
Plug and play capability if supported by your system. On-Screen Display (OSD) adjustments in English, Dutch,
French, Italian, Simplified Chinese, German, and Spanish for ease of set-up and screen optimization.
Software and documentation CD that includes monitor driver
software and product documentation.
Energy Saver feature for Energy Star compliance. AssetControl Compliant with the following regulated specifications: EPA ENERGY STAR European Union CE Directives Swedish MPR II 1990 Swedish TCO requirements
Safety and Maintenance Guidelines
Important Safety Information
A power cord is included with your monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, refer to the Power Cord Set Requirements section in Appendix C.
WARNING: To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding feature. This equipment is designed to be connected to a grounded (earthed) power outlet that is easily accessible to the operator. The grounding plug is an important safety feature.
WARNING: For your safety, be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment as possible. When you need to disconnect the power to the equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord.
CAUTION: For the protection of your monitor, as well as your computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacement Policy so you can replace your equipment if surge protection fails.

Maintenance Guidelines

To enhance the performance and extend the life of your monitor:
Do not open your monitor cabinet or attempt to service this
product yourself. Adjust only those controls that are covered in the operating instructions. If your monitor is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider.
Use only a power source and connection appropriate for this
monitor, as indicated on the label/back plate of the monitor.
Be sure the total ampere rating of the products connected to
the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device.
Install your monitor near an outlet that you can easily reach.
Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.
Turn your monitor off when not in use. You can substantially
increase the life expectancy of your monitor by using a screen saver program and turning off the monitor when not in use.
Slots and openings in the cabinet are provided for ventilation.
These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.
Do not drop your monitor or place it on an unstable surface. Do not allow anything to rest on the power cord. Do not walk

on the cord.

Keep your monitor in a well-ventilated area, away from
excessive light, heat or moisture.
When removing the monitor base, you must lay the monitor
face down on a soft area to prevent it from getting scratched, defaced, or broken.

Cleaning the Monitor

1. Unplug the monitor from the wall outlet. 2. Turn off the monitor and the computer. 3. Clean the monitor plastics with a clean cloth dampened with water. 4. Clean the monitor screen with an antistatic screen cleaner.
CAUTION: Do not use benzene, thinner, ammonia, or any other volatile substances to clean your monitor or the screen. These chemicals may damage the cabinet finish as well as the screen.

Shipping the Monitor

Keep the original packing box in a storage area. You may need it later if you move or ship your monitor.

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below.
Unfolding the Monitor Base
The monitor is shipped with the base attached in a folded flat position. To begin using the monitor, you must unfold the base and place the monitor in an upright position.

Unfolding the Base

Identifying Rear Panel Components

Rear Panel Components

The Information File

The.INF file defines monitor resources used by Microsoft Windows operating systems to ensure monitor compatibility with the computers graphics adapter. This monitor is Windows Plug and Play compatible and the monitor will work correctly without installing the.INF file. Monitor Plug and Play compatibility requires that the computers graphic card is VESA DDC2 compliant and that the monitor connects directly to the graphics card. Plug and Play does not
work through separate BNC type connectors or through distribution buffers/boxes. You may need to install the.INF file if these conditions are not met.
The Image Color Matching File
The.ICM files are data files that are used in conjunction with graphics programs to provide consistent color matching from monitor screen to printer, or from scanner to monitor screen. The.ICM file contains a monitor color system profile. This file is activated from within graphics programs that support this feature. in accordance with The ICM color profile is written(ICC) Profile Formatthe International Color Consortium specification.
Installing the.INF and.ICM Files
After you determine that you need to update, you can install the.INF and.ICM files from the CD or download them.

Installing from the CD

To install the.INF and.ICM files on the computer from the CD: 1. Insert the CD in the computer CD-ROM drive. The CD menu displays. 2. View the INF and ICM Readme file. 3. Select Install INF and ICM Files. 4. Follow the on-screen instructions. 5. After the INF software has been installed, restart Windows. 6. Ensure that the proper resolution and refresh rates appear in the Windows Display control panel.
digitally signed monitor.INF and You may need to install thethe CD in the event of an installation.ICM files manually from error. Refer to the INF and ICM Readme file on the CD.
Downloading from the Worldwide Web
To download the latest version of.INF and.ICM files from the HP monitors support Web site: 1. Refer to http://www.hp.com/support and select your country region. 2. Follow the links for your monitor to the support page and download page. 3. Ensure your system meets the requirements. 4. Download the software by following the instructions.

Using the Auto-Adjustment Function
You can optimize the screen performance for the VGA (analog) input by using the Auto Adjust button on the monitor and the auto-adjustment pattern software utility on the CD provided. Do not use this procedure if your monitor is using a DVI input. If your monitor is using a VGA (analog) input, this procedure can correct the following image quality conditions:
Fuzzy or unclear focus Ghosting, streaking or shadowing effects Faint vertical bars Thin, horizontal scrolling lines An off-center picture
To use the auto-adjustment feature: 1. Allow the monitor to warm up for 20 minutes before

adjusting.

2. Press the Auto Adjust button on the monitor front panel.
You can also press the Menu button, then select Image
Control from the OSD Main Menu. Next, select Auto Adjustment. Refer to Adjusting Monitor Settings in this chapter.
If the result is not satisfactory, continue with the
procedure. 3. Insert the CD in your disc drive. The CD menu launches. 4. Select Open Auto-Adjustment Software. The setup test

pattern displays.

5. Press the Auto Adjust button on the monitor front panel to produce a stable, centered image. 6. Press the ESC key or any other key on your keyboard to exit the test pattern.

Front Panel Controls

No. Control

1 Auto Adjust Menu

Activates the auto adjustment feature for optimum image. Opens the On-Screen Display (OSD) menu. If OSD is on, press to navigate backward through the OSD menu features and decrease adjustment levels. If OSD is off, press to enable the DVI signal input (available on select models)

(Minus)

+ (Plus)
If OSD is on, press to navigate forward through the OSD menu features and increase adjustment levels. If OSD is off, press to enable the VGA signal input.
Turns the monitor on or off.
Adjusting Monitor Settings
Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To access the OSD, do the following: 1. If the monitor is not already on, press the Power switch to turn on the monitor. 2. Press the Menu button on the monitors front panel to launch the OSD Main Menu.
3. To navigate through the OSD Menu, press the + (Plus) button on the monitors front panel to scroll up, or the (Minus) button to scroll in reverse. 4. To select an item from the OSD Menu, use the + or buttons to scroll to and highlight your selection, then press the Menu button to select that function. 5. Adjust the item using the + or buttons on the front panel to adjust the scale.
6. After adjusting the function, select Save and Return, or Cancel if you dont want to save the setting, then select Exit from the Main Menu. 10 seconds If the buttons remain untouched for saved whenwhile displaying a menu, the new adjustments will be the OSD automatically times out and exits the menu.

This monitor contains advanced circuitry that allows the flat panel screen to function like a standard monitor. Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock Phase. Use these controls only when the auto-adjust function does not provide a satisfactory image. set correctly since the Clock The Clock must first beon the main Clock setting. Phase settings are dependent
ClockIncrease/decrease the value to minimize any vertical
bars or stripes visible on the screen background.
Clock PhaseIncrease/decrease the value to minimize video
distortion or video jitter. controls, you will best When using thepattern application obtain theon theresults by using the adjustment provided CD-ROM. the Clock and Clock Phase monitor When adjusting distorted, continue adjustingvalues, if theuntil the images become the values distortion disappears. To restore the factory settings, select Yes from the Factory Reset menu in the on-screen display.
Identifying Monitor Conditions
Special messages will appear on the monitor screen when identifying the following monitor conditions:
Input Signal Out of Range Indicates the monitor does not
support the input signal because the resolution and/or refresh rate are set higher than the monitor supports. Set the resolution and refresh rate for 1280 x 1024 at 60 Hz. Restart your computer for the new settings to take effect.
Monitor Going to Sleep Indicates the screen display is

entering a sleep mode.

Check Video Cable Indicates the video cable is not
properly connected to the computer.
No Input Signal Indicates the monitor is entering a
reduced power state but the power saving feature is set to off.
Auto Adjustment in Progress Displays when auto
adjustment feature is active.
OSD LockThe OSD can be enabled or disabled by
pressing and holding the Menu button on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lock displays for ten seconds.
If the OSD is locked, press and hold the Menu button for
10 seconds to unlock the OSD.
If the OSD is unlocked, press and hold the Menu button
for 10 seconds to lock the OSD.

Sleep Timer Mode

The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to power on and off at the same time every day. This also extends the life of the backlight bulbs in the monitor. The Sleep Timer has five settings:

Set Current Time Set Sleep Time Set On Time

Timer: On/Off Sleep Now

To set the timer: 1. Press the Menu button on the monitor front panel to display the Advanced Menu. 2. Scroll down and highlight Management. 3. Press the Menu button to select Management. 4. Scroll down and highlight and select Sleep Timer > Set

Current Time.

local time before reset the for You must setorthe current Note that the timeyoudisplayed time24 Sleep Time On Time. is in a hour clock format. For example, 1:15 p.m. displays as 13 hours 15 minutes. 5. Press the Menu button once to enter the adjustment mode for hours. 6. Press the - (Minus) or + (Plus) buttons to adjust the hour. 7. Press the Menu button again to enter the time for minutes. 8. Press the - (Minus) or + (Plus) buttons to adjust the minutes. 9. Press the Menu button to lock in the time chosen. 10. After setting the current time, the highlight automatically skips to Set Sleep Time hours. Repeat steps 6 through 9 to set Sleep Time. 11. If you do not want to set Sleep Time, press the Menu button twice, then select Save and Return to exit the menu. 12. After setting Sleep Time, the highlight automatically skips to Set On Time hours. Repeat steps 6 through 9 to set On Time.
13. Set the Timer mode to On to activate the Sleep Timer settings. 14. When you are finished, select Save and Return to exit the menu. The fifth selection, Sleep Now, turns the monitor backlights off immediately and stays in sleep mode until the next On Time activates or a monitor button is pressed.

HP Display LiteSaver

HP Display LiteSaver is a software application, available on the CD, that increases monitor life and saves energy. It allows you to place your monitor into its low power sleep mode at predefined times by shutting down or reducing power to most internal circuits. This helps protect the LCD panel against image retention. Image retention can occur when the monitor is left on while displaying the same image for an extended period of time, leaving a shadow of the image on the screen.
Installing the HP Display LiteSaver Software
1. Insert the CD in the computer CD-ROM Drive. The CD menu displays. 2. Select Install HP Display LiteSaver Software. 3. After installing the software, click the HP Display LiteSaver icon in the Windows system tray or right-click the icon and select Configure. from the pop-up menu.

4. Select the following options to configure the HP Display LiteSaver features: Configure Options

Enable Display LiteSaver

Enables the HP Display LiteSaver functions; deselect to disable the HP Display LiteSaver. Sets the time when the monitor automatically turns off. This does not affect screen saver operation, which has priority over the HP Display LiteSaver. Sets the time when the monitor automatically turns on. This does not affect screen saver operation, which has priority over the HP Display LiteSaver. Sets the time in minutes before the monitor turns off if there is any keyboard or mouse activity after the Display Off time is reached. If the keyboard or mouse is used, then HP Display LiteSaver waits until the set amount of time before turning the display off again. Set to 0 to disable. If disabled, the monitor will turn off as soon as the Display Off time is reached, regardless of keyboard or mouse activity. Displays a popup message in the system tray 1 minute before the monitor is turned off by HP Display LiteSaver. Shows the time until the monitor is next due to be turned off by HP Display LiteSaver.

Display Off

Display On

Activity Extension

Show 1 minute Display Off Notice

Status

Configure Options
Stores the current settings and minimizes HP Display LiteSaver to the System Tray. Restores the previous settings and minimizes HP Display LiteSaver to the System Tray. HP Display LiteSaver will continue to run. Opens the online help file. Exits and closes the HP Display LiteSaver. It will no longer control the monitor power until it is next run.

Cancel

Help Exit
View HP Display LiteSaver Readme on the CD for additional information on how to configure the HP Display LiteSaver.

sRGB Support

The monitor is designed to support sRGB for color management, which adapts to the color standards used in the image technology industry. To take advantage of the sRGB support, you will need to change your monitors color temperature to sRGB and install the sRGB color profile (ICM) file. color The sRGB color temperature preset will improve thebut some accuracy of sRGB images on the computer monitor, color variation may still occur.

Changing the Color Temperature
1. Press the Menu button on the front panel of the monitor to launch the Main Menu of the OSD.

User Guide 415

2. Select Advanced Menu to access all options in the Main Menu. 3. Select Color to display the Color Temperature menu. 4. Select sRGB. 5. Select Save and Return to exit the menu.
Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP
logged as To complete the following procedure, you must begroup. Ifinthe an administrator or a member of the administrators computer is connected to a network, network policy settings may prevent you from completing this procedure. The sRGB ICM file does not support Windows 95 and Windows NT operating systems 1. Click the Display icon in the Control Panel. 2. In the Display Properties windows, select the Settings tab, then click the Advanced button. 3. Select the Color Management tab, then click the Add button to open the Add Profile Association dialog box. 4. Select the sRGB Color Space Profile.icm file, then click the Add button 5. To activate a color profile for your monitor, you must set it as the Default Monitor Profile. Select sRGB Color Space Profile, then click Set as Default button. 6. Click Apply or OK.

Troubleshooting

Solving Common Problems
The following table lists possible problems, the possible cause of each problem, and the recommended solutions.

Problem

Screen is blank.

Possible Cause

Power cord is disconnected. Power switch on front panel of the monitor is turned off. Video cable is improperly connected.

Solution

Connect the power cord. Press the front panel power button. Connect the video cable properly. Refer to Chapter 3, Setting Up the Monitor, for more information. Press any key on the keyboard or move the mouse to inactivate the screen blanking utility.
Screen blanking utility is active.
Image appears blurred, indistinct, or too dark.
Brightness and contrast are too low.
Press the Auto Adjust button on the front panel. If this does not correct the image, press the Menu button to open the Basic OSD Menu, and adjust the brightness and contrast scales as needed. Press the Menu button to access the OSD menu. Select Image Control/ Horizontal Position or Vertical Position to adjust the horizontal or vertical position of the image. Connect the 15-pin monitor video cable to the VGA connector on the computer, or, if connected, check the DVI-D signal cable to the DVI connector on the computer, or the VGA to DVI-I cable to the VGA connector on the computer (DVI available on select models only). Be sure that the computer power is off while connecting the video cable. Restart your computer and enter Safe Mode. Change your settings to a supported setting (see Factory Preset Display Modes table in Appendix B). Restart your computer so that the new settings take effect.

By selecting settings in the monitors Energy Saver utility, you can also program the monitor to enter into the reduced power state at a predetermined time. When the monitors Energy Saver utility causes the monitor to enter the reduced power state, the Power light blinks amber.
Agency Regulatory Notices
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio or television

technician for help.

Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett Packard Company may void the user's authority to operate the equipment.

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations.
Declaration of Conformity for Products Marked with the FCC Logo (United States Only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product, contact: Hewlett Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaration, contact: Hewlett Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333
To identify this product, refer to the Part, Series, or Model number found on the product.

Materials Disposal

This HP product contains the following materials that might require special handling at end-of-life:

Mercury in the fluorescent lamp in the display LCD. Lead in the solder and some component leads.
Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance (EIA) (www.eiae.org).

Canadian Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Avis Canadien

Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada.
European Union Regulatory Notice
This product complies with the following EU Directives:
Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC
Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family. This compliance is indicated by the following conformity marking placed on the product:
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth) This marking is valid for EU non-harmonized Telecom products. *Notified body number (used only if applicable refer to the product label)
Disposal of Waste Equipment by Users in Private Household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

C4 User Guide

Japanese Notice

Korean Notice

ENERGY STAR Compliance
Monitors that are marked with the ENERGY STAR Logo meet the requirements of the U.S. Environmental Protection Agency (EPA) ENERGY STAR program. As an ENERGY STAR Partner, Hewlett Packard Company has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Specific details on using the Energy Saving features can be found in the energy saver or power management section of the computer manual.
Power Cord Set Requirements
The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100-120V or 200-240V.
The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you purchased the equipment. If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the cross-sectional area of the wire must be a minimum of 0.75 mm or 18AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact your HP authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product.
Japanese Power Cord Requirements
For use in Japan, use only the power cord received with this product.
CAUTION: Do not use the power cord received with this product on any other products.
LCD Monitor Quality and Pixel Policy
The TFT monitor uses high-precision technology, manufactured according to HP standards, to guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the HP LCD. These imperfections are caused by one or more defective pixels or sub-pixels.

A pixel consists of one red, one green, and one blue

sub-pixel.

A defective whole pixel is always turned on (a bright spot on
a dark background), or it is always off (a dark spot on a bright background). The first is the more visible of the two.
A defective sub-pixel (dot defect) is less visible than a
defective whole pixel and is small and only visible on a specific background. The HP display does not have more than:
3 bright dots. 5 dark dots. 5 total bright and dark dots. No more than two adjacent (less than 25 mm edge-to-edge)

defective pixels.

To locate defective pixels, the monitor should be viewed under normal operating conditions, in normal operating mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (16 in.). HP expects that, over time, the industry will continue to improve its ability to produce LCDs with fewer cosmetic imperfections and HP will adjust guidelines as improvements are made.

 

Tags

Morebox 301D Book ONE 450WP WH 1724C BR-6204WG RC-631M FS-1020 V-332 MDX-C5960R KP-41PX1K CDN95 Station Sx 50 MHC-BX7 SRF-M55 GL1000 BX2235 LED KV-25X5B WM-12336FD MS9058E WDT1085 BH-204 EWF984 Control 1X COP-1 GR-267EHF P3520 ESF489 MX 1100 LRH-790 GT10D EG-800 ICD-UX71 PNK KH980-05 Teamset Travelmate-6592 Server GR-33B DX6440 Matica 500 100 WD CQ-RDP151N KW-NT3 DSL-2542B Eu R05 Mypal A626 TS2gjfv33 3450 SMS R-671 671F EXP2460 SGH-B100M Cuda 168 Velatura 7T62 TE 76 Review Wintv-PVR-150 MCE Aspire T160 EH-TW3000 DC400 4X4-2003 Abit UA11 RSH7unrs Samsung Q1 Csce9JKE Studio Alcatel-lucent 4018 PM-A970 M7300 CDE-7828E P4500-P3200-p1600 DM-3200 ZOB482X 14PT1332 Aqxd 129 Hammerle 3P CL1000N Virus KB Aspire-5050 GYA351 DMW-FL500 Etherez 8416 Digital-modul R Audioline 506 Speedtouch 570 775R-serials-810042621-thru-engine SU-WL51 Powershot G3 Cobra AWW1307 WD-1021W Kurzweil Kdfx Live 2004 UX-P110 Monster-1999 DPC2203 RDR-DC105 Kxtg6411 DAV-DZ860W FW-C85 Motorazr-V9M DJ-F1E

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101