Starting a copy job. Canceling a copy job. Adjusting copy quality for the current job. To adjust the copy quality for the current job. Adjusting the default copy quality. To adjust the copy quality. Adjusting the lighter/darker (contrast) setting for the current job. To adjust the lighter/darker setting for the current job. Adjusting the default lighter/darker (contrast) setting. To adjust the default lighter/darker setting. Reducing or enlarging copies for the current job. To reduce or enlarge copies for the current job. Adjusting the default copy size. To change the default copy size. Changing the copy collation setting. To change the copy collation setting for the current job. 59
To change the default copy collation setting. Changing the number of copies. To change the number of copies for the current job. To change the default number of copies. Using HP LaserJet Copier software. To access HP LaserJet Copier (Windows or Macintosh). Using HP LaserJet Copy Plus software. To access HP LaserJet Copy Plus (Windows). To access HP LaserJet Copy Plus (Macintosh). Copying photos, two-sided originals, or books. To copy or scan a photo. To copy a multiple page stack of 2-sided originals. To copy a book.

6 Scanning

Understanding scanning methods. Scanning from the products control panel. To scan from the products control panel using the start scan button. To use the scan to button via USB or parallel connection. To use the scan to button via network connection. To reprogram the scan to button destinations. To reprogram the start scan button. Canceling a scan job. Scanning with the product software. To scan using HP LaserJet Director (Windows). To scan using HP LaserJet Director (Macintosh). To use page-by-page scanning (Windows). To use page-by-page scanning (Macintosh). Scanning with TWAIN-compliant software. To use flatbed scanner preview scan. Archiving scanned text or images. To archive a scanned image. To use the archive feature (Macintosh). Scanning with OCR. To edit scanned text (Windows and Macintosh). To change the OCR word processing application. To use HP LaserJet Directors OCR feature. Enhancing images with HP LaserJet Document Manager or HP Photo Center. To access image enhancement features (Windows). Adding annotations to HP documents. To access HP LaserJet Document Managers annotation features. To change the annotation settings. Adding annotations to scanned image files. Sending scanned items as e-mail attachments. To scan to e-mail (Windows). To scan to e-mail (Macintosh). To e-mail scanned files in an alternative mode. Scanner resolution and color. Resolution and color guidelines. Color. 78

8 Package contents: 1) Print cartridge; 2) power cord; 3) getting started guide and support flyer; 4) CD-ROM containing product software, fax software, and electronic user guide; 5) 250-sheet media input tray and priority input tray; 6) ADF input tray; 7) fax guide; 8) phone cord.
Identifying your product 19
Identifying your products hardware components
HP LaserJet 3300 series hardware components
Printer control panel Print cartridge door ADF input tray Media input tray Priority input tray Flatbed scanner lid Left side panel Left side panel latch USB port
10 Parallel port 11 Power receptacle 12 Power switch (220V product) 13 Straight-through output door
Identifying your products control panel components
Choose a section of the HP LaserJet 3300 control panel to display. Fax controls Alphanumeric buttons Menu and cancel controls Copy, scan, and start controls

Fax controls

Use the fax controls to send and receive faxes and to change commonly used fax settings. Fax capability is available on the HP LaserJet 3330 product only. See Faxing for instructions on using the fax controls.
Identifying your products control panel components 21

Alphanumeric buttons

If you have a fax model, use the alphanumeric buttons to enter data into the products display screen and dial phone numbers for faxing. For information on using alphanumeric key characters see Using dialing characters.
Keypad buttons are numeric on non-fax models.

Menu and cancel controls

Use these controls to choose menu options, determine the products status, and cancel the current job.
Copy, scan, and start controls
Use these controls to change commonly used default settings, to start scanning, and to start copying. For instructions on copying, see Copying. For instructions on scanning, see Scanning.
Identifying HP Jetdirect 310x print server components
If you purchased an HP LaserJet 3320n model, an HP Jetdirect 310x print server was included with it. The graphic below points out the main features of the print server. See Networking for information about using the print server to connect the product to a network.
6 Test button Network port 10 and 100 LED lights Power outlet USB port Status indicator lights 6
Identifying HP Jetdirect 310x print server components 23
Identifying your products software components
Note Software components installed depend on OS, installation type, and the HP LaserJet 3300. Below are the software items included with your product:

q q q q q q q q

HP LaserJet Director HP LaserJet Scan Control Viewer TWAIN Scan Driver HP LaserJet Fax HP LaserJet Configuration Utility HP Photo Center Read Iris OCR Uninstaller

To print multiple pages on a single sheet (Macintosh)
From the General drop-down list, select Layout. In the Pages Per Sheet drop-down list, select the number of pages per sheet to print. You can print up to nine pages per sheet with a Macintosh OS.

Printing booklets

You can print booklets on letter, legal, executive, or A4 paper. This function is available for Windows users only.

To print booklets

2 Load the paper, and make sure that the straight-through output door is closed. Access the printer properties. See Changing settings from your computer for instructions. On the Finishing tab, select Print on Both Sides, and select Letter (Left Binding) or Letter (Right Binding) in the Booklet drop-down menu. Print the booklet. After side one has been printed, remove the remaining paper from the input tray, and set it aside until your booklet job is complete. Gather the printed pages, keep the printed side down, and straighten the stack of paper. Place the printed pages back in the input tray. Side one should be facing down with the top edge toward the printer. Click Continue (on screen), and wait for side two to print. Fold and staple the pages.

Printing booklets 53

Printing watermarks
You can use the watermark option to print text underneath (in the background) of an existing document. For example, you might want to have large gray letters reading Draft or Confidential printed diagonally across the first page or all of the pages of a document.
To access the watermark feature
From your software application, access the printer properties. See Changing settings from your computer for instructions. On the Effects tab (Windows) or the Watermark/Overlay screen (Macintosh), specify the type of watermark that you want to print on your document.

Copying

Use these instructions to perform copying tasks with your HP LaserJet 3300 product:
Starting a copy job Canceling a copy job Adjusting copy quality for the current job Adjusting the default copy quality Adjusting the lighter/darker (contrast) setting for the current job Adjusting the default lighter/darker (contrast) setting Reducing or enlarging copies for the current job Adjusting the default copy size Changing the copy collation setting Changing the number of copies Using HP LaserJet Copier software Using HP LaserJet Copy Plus software Copying photos, two-sided originals, or books

Starting a copy job

To make copies with your HP LaserJet 3300 series product, use the following instructions: 1 Load your original document onto the flatbed scanner face down (one page at a time) with the top left corner of the document located in the lower right corner of the glass. OR Load your original document face up into the ADF input tray. Press start/copy on the products control panel to start copying. Repeat the process for each copy.

The default set at the factory for number of copies is 1.
Using HP LaserJet Copier software
You can use HP LaserJet Copier to perform any of the following tasks when you copy your original:
Print up to 99 copies of the same document Enable or disable collation Reduce or enlarge the image Adjust the contrast Specify the copy quality Make color copies by sending to a color printer using HP LaserJet Copy Plus
This functionality is not available in Windows 95.
To access HP LaserJet Copier (Windows or Macintosh)
To access HP LaserJet Copier, use one of the following methods:
From HP LaserJet Director, click Copy or Copy Plus. From the Windows task bar, click Start, Programs, HP LaserJet 3300, and HP LaserJet Copier. From HP LaserJet Document Manager (Windows), click the Copier icon. OR From HP Workplace (Macintosh), click the Copy or Copy Plus icon.
If you click the Copy Plus icon in addition to the standard copier settings, you can also adjust the brightness of your copies and send the copy to another printer, including a color printer. For more information, see Using HP LaserJet Copy Plus software. For more information on using these features, see the product software Help.
Using HP LaserJet Copy Plus software
You can use HP LaserJet Copy Plus to send a scanned image to any installed Windows printer, including color printers, enabling you to make color copies. You can also access other advanced features, such as multiple pages per sheet copying and watermarks.
To access HP LaserJet Copy Plus (Windows)
To access HP LaserJet Copy Plus, use one of the following methods:
From HP LaserJet Director, click Copy Plus. OR Click Copy and select, I want to copy to another printer. From the Windows task bar, click Start, Programs, HP LaserJet 3300, and HP LaserJet Copier. Select I want to copy to another printer.
To access HP LaserJet Copy Plus (Macintosh)
From the HP LaserJet Director, click Customize. Click the Customization tab. Enable Copy Plus by checking the Copy Plus check box. Click OK.
The HP LaserJet Director will now display a Copy Plus option. This can be used in the same manner as the HP LaserJet Copier, see To access HP LaserJet Copier (Windows or Macintosh).
Using HP LaserJet Copy Plus software 61
Copying photos, two-sided originals, or books

To copy or scan a photo

1 Place the photo on the flatbed scanner with the picture side down and the top left corner of the photo in the lower right corner of the glass.
Gently close the lid. You are now ready to scan or copy the photo using one of the methods described. See Understanding scanning methods for more information.
To copy a multiple page stack of 2-sided originals

Scanning with OCR 73

Enhancing images with HP LaserJet Document Manager or HP Photo Center
You can use HP LaserJet Document Manager or HP Photo Center to make the following enhancements to scanned images:
Contrast Brightness Color adjustment Crop Effects Invert Red-eye removal Rotate and flip Sharpen Straighten
If you are using the Macintosh product software, these features are found in the HP Workplace. However, not all of the features listed above are supported by the Macintosh software.
To access image enhancement features (Windows)
From HP LaserJet Document Manager, open a document and select an image enhancement feature from the Image menu. For the Photo Center, first open a document then turn on Advanced menus from the View menu in order to display the Image menu.
For instructions on using HP LaserJet Document Managers image enhancement features, see the product software Help.
Adding annotations to HP documents
You can use HP software to modify and annotate scanned documents that are saved as HP documents (.hpd extension). You can add any of the following elements to an HP document:
Text Electronic sticky notes Highlights (to text or graphics) Rubber stamp (for example, Confidential) Lines and arrows Hyperlinks
To use annotations with other types of scanned documents, see Adding annotations to scanned image files. Note For complete instructions on using HP LaserJet Document Managers annotation features, see the product software Help.
To access HP LaserJet Document Managers annotation features
Note These instructions apply to Windows users only. If it is not open, open the document to be annotated in the HP LaserJet Document Manager. Select an annotation tool from the Annotation menu.
To change the annotation settings
To change the annotations settings, open the Annotations menu and select Annotation Properties.
Adding annotations to scanned image files
You can add annotations to.bmp,.tif,.jpg, and.gif files using the HP LaserJet Photo Center. You can add the following annotation elements:
Freehand drawing items Lines, rectangles, ovals, and polygons (filled or outlined) Text
To add annotations to an image file, select the Tools menu in the HP LaserJet Photo Center.
Sending scanned items as e-mail attachments
You can use either HP LaserJet Director or HP LaserJet Document Manager to scan to e-mail. Not all e-mail applications are supported. Note Scan to e-mail features are not supported in Windows 95.

WARNING! Alcohol is flammable. Keep the alcohol and cloth away from an open flame. Before you close the printer and plug in the power cord, allow the alcohol to dry completely. 3 Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt. Allow the pickup roller to dry completely before you reinstall it in the printer (see steps 6 through 9 of Changing the pickup roller).
Changing the pickup roller
See Ordering HP parts and accessories to order a new pickup roller.
To change the pickup roller
1 CAUTION Failure to complete this procedure might damage the printer. 1 Unplug the power cord from the printer, and allow the printer to cool.
Note If you have a 220V product, turn off the power switch. Open the print cartridge door, and remove the print cartridge. Find the pickup roller. Release the small, white tabs on either side of the pickup roller, and rotate the pickup roller toward the front. Gently pull the pickup roller up and out.
Changing the pickup roller 127
Position the new or cleaned part in the slot of the previous pickup roller. See Cleaning the pickup roller for instructions.
Note Circular and rectangular pegs on each side prevent you from incorrectly positioning the pickup roller. Rotate the top of the new pickup roller away from you until both sides snap into place.
Note Touching the black sponge roller may damage the product. 8 Reinstall the print cartridge, and close the print cartridge door. Plug the printer in to turn it back on. If you have a 220V product, turn on the power switch.
Changing the printer separation pad
If your input tray feeds more than one page at a time, you might need to change the printer separation pad. Recurring feed problems indicate that the printer separation pad is worn. If your product is under warranty, call support. If your product is not under warranty, see Ordering HP parts and accessories to order a new printer separation pad. Note Before you change the separation pad, clean the pickup roller. See Cleaning the pickup roller for instructions.
To change the printer separation pad
2 Unplug the power cord from the printer, and allow the printer to cool. Verify the power is off.

Too light or dark

Try adjusting the settings. HP LaserJet Copier: see Using HP LaserJet Copier software for more information. Make sure you have the correct copy quality settings. See Adjusting copy quality for the current job for more information.
You might need to change the properties settings for the associated function in HP LaserJet Director or HP LaserJet Document Manager. See the product software Help for details.

Unwanted lines

Make sure the priority input tray is in place. Try cleaning the flatbed scanner. See Cleaning the outside of the product for instructions. The photosensitive drum inside the print cartridge may have been scratched. Install a new HP print cartridge. See HP LaserJet print cartridges for instructions.

Black dots or streaks

Ink, glue, correction fluid, or an unwanted substance might be on the ADF or flatbed scanner. Try cleaning the product. See Cleaning the outside of the product for instructions.

Unclear text

Try adjusting the settings. HP LaserJet Copier: see Using HP LaserJet Copier software for more information. Make sure you have the correct quality settings. See Adjusting copy quality for the current job for more information.

Reduced size

The HP software settings might be set to reduce the scanned image. See the product software Help for more information about changing the settings in HP LaserJet Director and HP LaserJet Document Manager. See Using HP LaserJet Copier software for more information about changing the settings for HP LaserJet Copier.
Identifying and correcting copy defects 173
Troubleshooting scanning problems
Use these topics to find tips for solving common scanning problems.
Scanned image is of poor quality Part of the image did not scan or text is missing The text cannot be edited The scan takes too long Error messages appear on the screen The scanner did nothing Improving scan quality Identifying and correcting scan defects
Scanned image is of poor quality
Is the original a second generation photo or picture?
Reprinted photographs, such as those in newspapers or magazines, are printed using tiny dots of ink that make an interpretation of the original photograph, which dramatically decreases the quality. Often, the ink dots form unwanted patterns that, when scanned and reprinted or displayed, can be detected. If the following suggestions do not solve your problem, you might need to use a better quality version of the original.

Are there problems with the phone line?

Do one of the following:

Turn up the volume on the product and press fax/send on the control panel. If you hear a dial tone, the phone line is working. Disconnect the product from the phone jack and connect a phone. Try to make a phone call to make sure the phone line is working.
The product is receiving faxes but not sending them
Is your product on a PBX system?
If your product is on a PBX system, the PBX system might be generating a dial tone the product cannot detect. Disable the detect dial tone setting. See Changing the detect dial tone setting.
Is there a poor phone connection?
If you think there might be a poor connection on this phone line, try sending the fax later and see if it sends successfully.
Outgoing fax calls keep dialing
The product will automatically redial a fax number if the redial on busy option is set to on. To stop the redials while the product is dialing, press cancel. See the Changing redial settings if you need to change the setting.
Faxes you send are not arriving
Is the receiving fax machine off or does it have an error condition?
Call the recipient to make sure the fax machine is on and ready to receive faxes.
Is the fax still waiting in memory?
A fax might be in memory because it is waiting to redial a busy number, there are other jobs ahead of it waiting to be sent, or the fax is set up for a delayed send. If a fax job is in memory for any of these reasons, an entry for the job appears in the fax log. Print the fax activity log (see Printing the fax activity log) and check the Status column for jobs with a Pending designation.
All of the numbers in a long fax number cannot be dialed
The maximum number of digits or characters that can be entered into a fax number is 50. Try dialing the fax number in manual mode. See Using manual dial.
Unable to start receiving faxes from an extension phone
Is the extension phone setting disabled?
See Enabling an extension phone for instructions about changing this setting.
Is the telephone cord securely connected?
Check that the telephone cord is securely connected between the phone and the product (or other device connected to the product). Press 1-2-3 in sequence, wait for three seconds, then hang up.
Voice calls are not being received by the phone or answering machine connected to the line
Is the phone cord connected properly?
See Connecting the product to a phone line in the fax guide that came with the product to check the installation. The product must be the first device connected to the phone line.
Are the answer mode and rings-to-answer settings set properly?

Is the product out of paper?
If the product is out of paper and its memory is full it will not be able to receive faxes. Refill the media input tray. The product will print all of the faxes it has saved in memory and will then resume answering fax calls.
Faxes are transmitting or being received very slowly
Are you sending or receiving a very complex fax?
A complex fax, such as one with many graphics, takes longer to be sent or received.
Does the receiving fax machine have a slow modem speed?
The product only sends the fax at the fastest modem speed the receiving fax machine can use.
Is the resolution at which the fax was sent or received very high?
A higher resolution typically results in better quality, but also requires a longer transmission time. If you are receiving the fax, call and ask the sender to lower the resolution and resend the fax. If you are sending, lower the resolution and resend the fax. See Changing the default resolution to change the default setting.
Is there a poor phone line connection?
If there is a poor phone line connection, the product and the receiving fax machine slow down the transmission to adjust for errors. Hang up and resend the fax. If this does not work, have the phone company check the phone line.
Faxes are not printing or are printing incorrectly
Is there media in the media input tray?
If there is no media, load the media input tray. Any faxes received while the input tray is empty are stored in memory and will print once the tray has been refilled.
Is the receive to PC option selected?
If the receive to PC option is selected, faxes are being received by the computer. See Receiving faxes to your computer for information on this setting.
Faxes are printing on two pages instead of one
Is the autoreduction setting set correctly?
If you want faxes to be reduced to fit on one page, the autoreduction setting should be on. If the setting is off, faxes may print on multiple pages. See Changing autoreduction settings for incoming faxes to adjust the setting.
Received faxes are too light or are printing only on half of the page

If yes, continue with Power/Status OK? (Power/Status light ON solid green?). If no, you may need to replace the component indicated at fault. If the fault is with the print server or the USB cable (provided with the print server), get assistance from HP Jetdirect technical support; see the support flyer that came with your product for information on contacting HP.
Power/Status OK? (Power/Status light ON solid green?)
The Power/Status light provides information on the state of the print servers power connection and on its physical connection to the network. If connections are working correctly, the Power/Status light should be ON solid green (bright green in color and glowing continuously, not blinking). If the connections are not working correctly, the Power/Status light may be off, blinking green, or blinking amber. If your print servers Power/Status light is ON solid green, continue with 10/100 link OK? (10 light or 100 light ON solid green?). If your print servers Power/Status light is not ON solid green, or if you are not sure what to look for, read the topics below to start evaluating the status of the print server.
Is the Power/Status light ON solid green?
Check the Power/Status light on your print server. It should be ON solid green (bright green in color and glowing continuously, not blinking). If it is not ON solid green, please follow the troubleshooting steps below. For all of the steps below, note that when you first apply power to a normally operating print server, the Power/Status light will slowly blink green for several seconds during self-test, and then go ON solid green when the unit is ready for operation. Note Check that the Jetdirect power module is plugged into a suitable power source (typically a wall outlet), and that the power connector is plugged into the print server.
If necessary, try plugging the power module into a different power source. Try a different power module/cable if one is available. After checking the items above and making any necessary changes, is the Power/Status light now ON solid green?
What is the state of the Power/Status light?
The behavior of the Power/Status light indicates the status of the print servers power connection and its physical connection to the network. If the Power/Status light on your print server is not ON solid green, find its state in the list below and continue troubleshooting.

Host Name

IP Address
The Internet Protocol (IP) address assigned to the print server. This is a required entry for its operation on a TCP/IP network. During initialization, a temporary value 0.0.0.0 is displayed. After two minutes, a default IP address 192.0.0.192 is assigned, which may not be a valid IP address for your network. q Not Specified an IP address is not assigned or the value is zero.

Subnet Mask

The IP subnet mask configured on the print server. During initialization, a temporary value 0.0.0.0 is displayed. Depending on configuration parameters, the print server may automatically assign a usable default value. q Not Specified a subnet mask is not configured. The IP address of the gateway used when sending packets off the local network. Only one default gateway may be configured. During initialization, a temporary value 0.0.0.0 is displayed. If not provided, the IP address of the print server is used. q Not Specified a default gateway is not configured. Identifies how the print server obtained its IP configuration. BOOTP automatic configuration via a BOOTP server. q BOOTP/TFTP automatic configuration via a BOOTP server and TFTP configuration file. q DHCP automatic configuration via a DHCP server. q DHCP/TFTP automatic configuration via a DHCP server and TFTP configuration file. q RARP automatic configuration via the Reverse Address Resolution Protocol. q User Specified manual configuration via Telnet, the printers control panel, HP Web JetAdmin, embedded web server, or other method. q Default IP the default IP address was assigned. This address may not be a valid address for your network. q Not Configured the print server was not configured with IP parameters. Verify that TCP/IP is enabled, or check for error status.

Default Gateway

Config By
BOOTP Server or DHCP Server or RARP Server BOOTP/DHCP Server
Displayed if BOOTP, DHCP, or RARP is used for TCP/IP configuration. It specifies the IP address of the system that responds to the print servers request for automatic TCP/IP configuration over the network. q Not Specified the configuration servers IP address could not be determined or was set to zero in the response packet. Displayed during initialization while the print server attempts to obtain its TCP/IP configuration from a BOOTP or DHCP server. The temporary address displayed is 0.0.0.0. q Not Specified the configuration servers IP address could not be determined or was set to zero in the response packet. The IP address of the system where the TFTP configuration file is located. During initialization, the temporary address 0.0.0.0 is displayed. q Not Specified a TFTP server has not been set. The name of the print server's configuration file. The file pathname may be truncated to fit on two lines. q Not Specified a file was not specified in the BOOTP reply from the host.

TFTP Server

Config File
Interpreting the configuration page 201

Domain Name

The Domain Name System (DNS) name of the domain in which the print server resides (for example, support.company.com). It is not the fully qualified DNS name because the host printer name is not included (for example: printer1.support.company.com). q Not Specified a domain name has not been configured on the print server. The IP address of the Domain Name System (DNS) server. Not Specified a DNS server's IP address has not been configured on the print server. The IP address of the Windows Internet Name Service (WINS) server. Not Specified a WINS server's IP address has not been configured on the print server. The IP address of the syslog server configured on the print server. Not Specified a syslog server has not been configured. The timeout value expressed in seconds after which the print server closes an idle TCP print data connection. Acceptable values are integers between 0 and 3600 seconds. A value of zero turns off the timeout mechanism. The default value is 270 seconds. Specifies whether the print server sends Service Location Protocol (SLP) packets used by system applications for automated installation. q Enabled the print server sends SLP packets. q Disabled the print server does not send SLP packets. Identifies whether a host access control list is configured on the print server. A host access control list specifies the IP address of individual systems, or IP network of systems, that are allowed access to the print server and device. q Specified a host access list is configured on the print server. q Not Specified a host access list is not configured on the print server. All systems are allowed access. If the print server is found on the network by HP Web JetAdmin, the URL of the host system used for HP Web JetAdmin services is displayed. The URL is limited to two lines and may be truncated. q Not Specified the URL of the HP Web JetAdmin host system could not be identified or is not configured.

DNS Server

WINS Server

Syslog Server

Idle Timeout

Access List

Web JetAdmin URL
IPX/SPX protocol information
Provides the current status and parameter values for the IPX/SPX network protocols. Message
Indicates the current IPX/SPX protocol status. q Ready the print server is awaiting data over IPX/SPX. q Disabled IPX/SPX was manually disabled. q Initializing the print server is registering the node address or name. An additional status message may also be displayed. An error code and message are displayed if the print server is not ready. Specifies the frame type selection on the print server. Auto Select the print server automatically senses and limits the frame type to the first one detected. q EN_II limits the frame type to IPX over Ethernet frames. All others will be counted and discarded. q EN_802.2 limits the frame type to IPX over IEEE 802.2 with IEEE 802.3 frames. All others will be counted and discarded. q EN_SNAP limits the frame type to IPX over SNAP with IEEE 802.3 frames. All others will be counted and discarded. q EN_802.3 limits the frame type to IPX over IEEE 802.3 frames. All others will be counted and discarded.

Regulatory information for EU countries
This equipment has been designed to work in all of the countries of the European Economic Area (Public Switched Telephone Networks) only. Network compatibility is dependent on internal software settings. Contact your equipment supplier if it is necessary to use the equipment on a different telephone network. For further product support, contact Hewlett-Packard at the phone numbers provided in the support flyer that came with the product.
HP Jetdirect 310x print server
HP Jetdirect 310x print server specifications FCC compliance Declaration of Conformity Australia Canada Japan VCCI Class B regulations Korean EMI statement Chinese safety statement
HP Jetdirect 310x print server specifications

Supported networks

Physical
Supports unshielded or shielded twisted pair cabling, using an RJ-45 connector for: IEEE 802.3i 10Base-T (Ethernet) IEEE 802.3u 100Base-Tx (Fast Ethernet) Requires a 10/100Base-Tx network hub or concentrator that supports link beat (link test pulse) signals. Microsoft Windows 95, 98, 2000, ME, and XP (TCP/IP, IPX/SPX) Microsoft Windows NT 4.0 and later (TCP/IP, IPX/SPX, DLC/LLC) Apple Macintosh OS 8.6 and later (EtherTalk) Novell NetWare v 3.11, 3.12, 4.x, 5.0 (IPX/SPX); NDS (IPX/SPX); NDPS (IPX/SPX) IBM OS/2 Warp v 3.0, 4.0 (TCP/IP), DLC/LLC) HP-UX 10.x, 11.x; Solaris v2.5x, 2.6; SCO UNIX v86, 3.2, 4.2, 5.0; IBM AIX v3.2.5 and later; MPE-ix v5.5 (TCP/IP) Artisoft LANtastic 7.0 (DLC/LLC) Line Printer Daemon (LPD)
Supported network operating systems and protocols

Interfaces

Network See network specifications above USB Female A connector, complies with USB version 1.1 specifications Width: 97 mm (3.8 inches) with clip attached, 92 mm (3.6 inches) excluding clip and connectors Length: 129 mm (5.1 inches) Height: 45 mm (1.8 inches) with clip attached, 36 mm (1.4 inches) excluding clip and connectors 108 g (3.9 oz.)

Operating environment

HP Web Jetadmin

Supported Devices

Edition 13, 2/2011

Supported devices
New device support for HP Web Jetadmin
The latest version of HP Web Jetadmin (10.2.73942) adds support for the following devices: HP Officejet Pro 8500A e-All-in-One Printer series HP Officejet Pro 8000 Enterprise Printer HP LaserJet Pro CP1525 Color Printer series * HP LaserJet Pro M1536dnf MFP * HP LaserJet Pro CM1415 Color MFP series *
* HP Web Jetadmin provided limited support for these devices in earlier releases.
All supported devices for HP Web Jetadmin 10.2
HP device family HP Professional Series HP Business Inkjets HP devices HP 2000C, HP 2500C HP Business Inkjet 1100, HP Business Inkjet 1200, HP Business Inkjet 2230, HP Business Inkjet 2250, HP Business Inkjet 2280, HP Business Inkjet 2300, HP Business Inkjet 2600, HP Business Inkjet 2800, HP Business Inkjet 3000, HP Color Inkjet CP1160, HP Color Inkjet CP1700 HP Color LaserJet CM1017 MFP, HP Color LaserJet CM8050, HP Color LaserJet CM8060, HP Color LaserJet 4730 MFP, HP Color LaserJet 9500 MFP, HP Color LaserJet 9850 MFP, HP LaserJet 4100 MFP, HP LaserJet 4345 MFP, HP LaserJet 9000 MFP, HP LaserJet 9000L MFP, HP LaserJet 9040/9050 MFP, HP LaserJet 9055 MFP, HP LaserJet 9065 MFP, HP LaserJet M3027 MFP, HP LaserJet M3035 MFP, HP LaserJet M4345 MFP, HP LaserJet M5025 MFP, HP LaserJet M5035 MFP; HP LaserJet M1522n MFP. HP LaserJet M2727nf MFP, HP Color LaserJet CM6040 MFP, HP Color LaserJet CM6030 MFP, HP LaserJet M9050 MFP, HP LaserJet M9040 MFP, HP CM8050/8060 MFP with Edgeline, HP Color LaserJet CM1312 MFP and its derivatives (all) (HP Color LaserJet CM1312cb MFP, HP Color LaserJet CM1312eb MFP, HP Color LaserJet CM1312wb MFP, HP Color LaserJet CM1312ci MFP, HP Color LaserJet CM1312ei MFP, HP Color LaserJet CM1312wi MFP), HP Color LaserJet CP2024n, HP Color LaserJet CP2025, HP Color LaserJet CP2025n, HP Color LaserJet CP2025dn, HP Color LaserJet CM2320 MFP, HP Color LaserJet CM2320n MFP, HP Color LaserJet CM2320cb MFP, HP Color LaserJet CM2320eb MFP, HP Color LaserJet CM2320wb MFP, HP Color LaserJet CM2320nf MFP, HP Color LaserJet CM2320cbb MFP, HP Color LaserJet CM2320ebb MFP, HP Color LaserJet CM2320wbb MFP, HP Color LaserJet CM2320fxi MFP, HP Color LaserJet CM2320ci MFP, HP Color LaserJet CM2320ei MFP, HP Color LaserJet CM2320wi MFP, HP Color LaserJet CM3530 MFP, HP LaserJet Enterprise CM4540 MFP series, HP Color LaserJet Enterprise CP5520 Printer series, HP LaserJet Pro M1536dnf MFP Printer, HP LaserJet Pro CM1415 Color MFP series
HP Multifunction Printers
HP device family HP Color LaserJets
HP devices HP Color LaserJet, HP Color LaserJet 2500, HP Color LaserJet 2550, HP Color LaserJet 2600, HP Color LaserJet 2605, HP Color LaserJet 2700, HP Color LaserJet 2700n, HP Color LaserJet 2830/2840, HP Color LaserJet 3000, HP Color LaserJet 3500, HP Color LaserJet CP3505, HP Color LaserJet 3550, HP Color LaserJet 3600, HP Color LaserJet 3700, HP Color LaserJet 3800, HP Color LaserJet 4500, HP Color LaserJet 4550, HP Color LaserJet 4600, HP Color LaserJet 4610, HP Color LaserJet 4650, HP Color LaserJet 4700, HP Color LaserJet 5/5M, HP Color LaserJet 5500, HP Color LaserJet 5550, HP Color LaserJet 8500, HP Color LaserJet 8550, HP Color LaserJet 9500, HP Color LaserJet CP3005, HP Color LaserJet CP4005, HP Color LaserJet CP6015, HP Color LaserJet CP1515N and its derivatives (all), (HP Color LaserJet CP1513n, HP Color LaserJet CP1514n, HP Color LaserJet CP1516n, HP Color LaserJet CP1516n, HP Color LaserJet CP1517ni, HP Color LaserJet CP1518ni, HP Color LaserJet CP1519ni), HP Color LaserJet CP3525, HP Color LaserJet CM6049, HP Color LaserJet CP5221, CP5221N, and CP5221DN, HP Color LaserJet CP5223, CP5223N, and CP5223DN, HP Color LaserJet CP5225, CP5225N, and CP5225DN, HP Color LaserJet CP5227, CP5227N, and CP5227DN, HP Color LaserJet CP5229, CP5229N, and CP5229DN, HP Color LaserJet CP4020, HP Color LaserJet CP4525, HP LaserJet M4349x MFP, HP LaserJet M5039 MFP, HP LaserJet M9059 MFP, HP Color LaserJet Enterprise CP5520 Printer series, HP LaserJet Pro CP1525 Color Printer series HP LaserJet 1150, HP LaserJet 1160, HP LaserJet 1200, HP LaserJet 1220, HP LaserJet 1300, HP LaserJet 1320, HP LaserJet 2100, HP LaserJet 2200, HP LaserJet 2300, HP LaserJet 2300L, HP LaserJet 2410/20/30, HP LaserJet 3050, HP LaserJet 3052, HP LaserJet 3055, HP LaserJet 3052/3055 AiO, HP LaserJet 3200, HP LaserJet 3300/10/20, HP LaserJet 3330, HP LaserJet 3380, HP LaserJet 3390, HP LaserJet 4+, HP LaserJet 4000, HP LaserJet 4050, HP LaserJet 4100, HP LaserJet 4200, HP LaserJet 4200L, HP LaserJet 4250, HP LaserJet 4300, HP LaserJet 4350, HP LaserJet 4Si, HP LaserJet 4V, HP LaserJet 5/5M, HP LaserJet 5000, HP LaserJet 5100 series, HP LaserJet 5200, HP LaserJet 5200lx, HP LaserJet 5Si, HP LaserJet 6MP, HP LaserJet 8000, HP LaserJet 8100, HP LaserJet 8150, HP LaserJet 9040, HP LaserJet 9000, HP LaserJet 9050, HP LaserJet P2015, HP LaserJet P3005, HP Mopier 240, HP LaserJet P1504n, HP LaserJet P1505n, HP LaserJet P1506n, HP LaserJet P1505, HP LaserJet P1606dn, HP LaserJet P1607dn, HP LaserJet P1608dn, HP LaserJet P1609dn, HP LaserJet P4515, HP LaserJet P4014, HP LaserJet P4015, HP LaserJet P2055d/dn/x, HP LaserJet P2053d/dn/x, HP LaserJet P2054d/dn/x, HP LaserJet P2056d/dn/x, HP LaserJet P2057d/dn/x, HP LaserJet P2033/P2033n, HP LaserJet P2034/P2034n, HP LaserJet P2035/ P2035n, HP LaserJet P2036/P2036n, HP LaserJet P2037/P2037n, HP LaserJet P3015, HP Mopier 320 HP Designjet 1055CM, HP Designjet 130/130nr, HP Designjet 2000C, HP Designjet 2500CP, HP Designjet 30/30n, HP Designjet 4000, HP Designjet 4500, HP Designjet 5000 series, HP Designjet 5500, HP Designjet 800 series, HP Designjet T1100 and T1100PS (24 and 44 inch models), HP Designjet Z2100 (24 and 44 inch model), HP Designjet Z3100 and Z3100PS (24 and 44 inch models), HP Designjet Z6100 and Z6100PS (42 and 60 inch models), HP Designjet T610 (24-in and 44-in models), HP Designjet Z3200 (24 inch photo and 44 inch photo), HP Designjet Z3200ps (24 inch photo and 44 inch photo), HP Designjet 510, HP Designjet 510 hpgl2, HP Designjet 510 mono, HP Designjet 510 mono hpgl2, HP Designjet 510 ps, HP Designjet 510 ps hpgl2, HP Designjet 4020/4020ps/ 4520/4520ps/4520mfp, HP Designjet Tin. and 44 in., HP Designjet T1120ps 24 in. and 44 in., HP Designjet T620 and T620 PostScript, HP Designjet T770 and T770 PostScript, HP Designjet T1200 and T1200 PostScript, HP Designjet Z5200 44in PostScript Photo Printer, HP Designjet T770, HP Designjet T7100 Monochrome, HP Designjet T7100, HP Designjet T7100ps Monochrome, HP Designjet T7100ps, HP Designjet Z6200 42" Printer, HP Designjet Z6200 42" PostScript Printer, HP Designjet Z6200 60" Printer, HP Designjet Z6200 60" PostScript Printer, HP Designjet T2300, HP Designjet T2300 PostScript

HP LaserJets

HP Large Format Printers
Chapter 1 Supported devices
HP device family HP Officejets and Deskjets
HP devices HP Deskjet 1120C, HP Deskjet 1220C, HP Deskjet 1600C/CM, HP Deskjet 5550/5551, HP Deskjet 5800, HP Deskjet 6127, HP Deskjet 6500/6600/6800, HP Deskjet 970C, HP Officejet 9100 series, HP Officejet 9120/9130, HP Officejet K550, HP Officejet Pro K5400, HP Officejet Pro 7580/7590, HP Officejet Pro 7680/7780, HP Officejet Pro 8600, HP Officejet Pro K5300, HP Officejet Pro 8000 A809 Series, HP Officejet Pro 8500 A909a Series, HP Officejet Pro 8000 Enterprise Printer, HP OfficeJet Pro 8500A e-All-in-One Printer series HP 9100, HP 9200, HP 9250cn HP Scanjet 7000, HP Scanjet Enterprise 7000n Document Capture Workstation, HP Scanjet Enterprise 7000nx Document Capture Workstation, Document Capture Workstation, HP Scanjet N8400 Series: N8460/N8420, HP Scanjet N9120, HP Scanjet 9000, HP Scanjet Enterprise 7500 Flatbed Scanner
HP Digital Senders HP Scanjets

Legal statements

2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. c01840759, Edition 13, February 2011
Chapter 2 Legal statements