The touch pad is by default inactive when an external mouse is installed. You can enable both touch pad and an external pointing device by changing the BIOS setting. See Using the BIOS Setup Utility on page 86.
To change the boot device
Your HP notebook is configured to boot from the hard drive first. You can also boot from a floppy disk or a CD. To change the computers boot order You can set the computer to boot from a floppy disk or CD whenever one is present, by changing the boot order in the BIOS Setup utility: 1. Click Start, Shut Down (or Turn Off Computer), Restart. 2. When you see the HP logo, press F2 to start the BIOS Setup utility. 3. Use the arrow keys to move to the Boot menu. 4. Use the arrow keys to select the boot device, and press F5 or F6 to move that device to the top of the list. 5. Press F10 to save your changes and exit the BIOS Setup utility.
To boot from a floppy disk or CD-ROM one time only You can also select the boot drive for that boot only as follows: 1. Restart the computer: click Start, Shut Down (or Turn Off Computer), Restart. 2. When you see the HP logo, press ESC to display the Boot menu. 3. Use the arrow keys to select the boot device, then press Enter.
To use the One-Touch buttons
The One-Touch buttons on your HP notebook allow you to start your e-mail or a Web browseror any other applicationby pressing a single button. The buttons are configured initially for specific applications, but you can change the configuration to start any applications you want. To configure a One-Touch button 1. Click Start, Settings, Control Panel, then double-click Keyboard (Windows 98 or 2000), or click Start, Control Panel, Printers and Other Hardware, Keyboard (Windows XP). 2. Select the One-Touch buttons tab. 3. Click the button of the key you want to reconfigure. 4. In the Button Label field, type the name of the application you want to start with this button. This name will appear onscreen when you press the button. 5. From the list of preinstalled applications, select the application to be associated with the button. OR If the desired application is not on the list, select Select a file on your computer and click the Browse button to choose any file on your notebook. OR If you want to attach a Web page to the button, select Type in a Web site address and then select a Favorites page or type the URL of the page you want. 6. Click OK. 7. If you want to display the name of the associated application whenever you press a One-Touch button, click the Onscreen Display tab and select the option to show OneTouch button onscreen messages.

To connect to the Internet
If you have not yet signed up with an Internet Service Provider (ISP), see To connect to an Internet Service Provider on page 29 for instructions. When you have signed up with an ISP, you can connect to the Internet. Choose one of the following: If you signed up with AOL, AT&T WorldNet, Compuserve 2000, Earthlink, or MSN, double-click the appropriate icon in the Online Services folder on the desktop (if available). OR Click Start, Programs, Online Services (Windows 98 or 2000), or Start, All Programs, Easy Internet Signup (Windows XP).
If you signed up with another ISP, double-click the Internet Explorer icon on the desktop (if available), or click Start, Programs, Internet Explorer (Windows 98 or 2000) or Start, Internet Explorer (Windows XP). Then click the Connect button in the Dial-up Connection or Network Connection window. For Windows 98 or 2000, when you are successfully connected to the Internet, youll see a connect icon (two connected computers) next to the clock on the taskbar. For Windows XP, to display an icon for your connection, open Network Connections in Control Panel, right-click the connection, select Properties, and select the icon option. You are now ready to explore the Internet. To go to a specific web site, enter the address (for example, www.hp.com) in the browsers Address field. To search for information on the Web, use the browsers Search tool and enter the word or phrase you are looking for. To use AOL as your ISP When you use AOL as your ISP, you can access the Internet only with AOLs own software; you cant use a standard browser like Internet Explorer. As a result: You cannot view web sites by clicking on links (such as those in the electronic Reference Guide that link to the HP notebook web site). You cannot go to a web site by entering the address in Windows Explorer. If you try to access the Internet without using the AOL software, the Internet Connection wizard automatically launches, asking you to sign up for an ISP. In that case, cancel the wizard and launch AOL. For additional ISP information, please refer to the Microsoft Operating Manual included in your box or Windows Help.
To disconnect from the Internet
You remain connected to the Internet until you shut down the computer, disconnect the phone line from the computer, or give a command to hang up the connection. To disconnect from AOL, use the Sign Off menu. To disconnect from other ISPs, double-click the connect icon (two connected computers next to the clock) on the taskbar, and click Disconnect. OR For Windows XP: click Start, Control Panel, Network and Internet Connections, Network Connections, then right-click the connection and select Disconnect.

If you have problems making this connection, contact the vendor of the peripheral device, as well as the HP web site, for the latest versions of the USB drivers.

To connect audio devices

There is a built-in microphone located just below the blue standby button. You can use it to record voice, sound, and music. You can also plug in an audio input source (such as a CD player or an external microphone) or an audio output device (such as external speakers or headphones). Attach the audio cable to the appropriate port on the computer or the optional port replicatorsee To identify the ports on page 74.
When you plug a device into the microphone port, the built-in microphone automatically turns off. When you plug a device into the audio out port, the built-in speakers automatically turn off.

To use infrared devices

(Provided for selected models.) You can communicate between your notebook and infrared devices without using cables. To enable the infrared port
In the BIOS Setup utility, infrared communication is by default disabled. Before you use your infrared port, you must enable the infrared port in the BIOS. 1. Restart your computer. 2. When you see the HP logo, press F2. 3. Select the System Devices menu. 4. Set Infrared Port to Enabled. 5. Make sure Mode is set to FIR (Fast Infrared). This is the default. 6. Save and Exit to continue restarting. The infrared hardware will be detected on the next restart, and the appropriate drivers will be installed. To set up the infrared connection Your notebook provides one infrared port located on the rear panel. This port provides serial communication between your computer and other infrared devices such as printers and other computers. Line up the notebooks infrared port with that of the other device, in as straight a line as possible. The two ports should be no more than one meter apart, with no obstructions in between. Heat from nearby equipment can cause transmission errors.
To check the status of communications, open Infrared Monitor (Windows 98) or Wireless Link (Windows 2000 or XP) in Control Panel. If infrared communication is not enabled, you can enable it here; consult help in the application. To print to an infrared printer With Windows 2000 or XP, when you align the infrared ports of the computer and the printer, the appropriate drivers are loaded automatically. Follow the onscreen directions, and you can proceed to print. With Windows 98, you must install the printer driver and assign it to the notebooks Infrared Printing (LPT) port, which is usually assigned to LPT3. Click Start, Settings, Printers, Add Printer, and follow the onscreen directions. If you have already assigned a printer to the parallel port, you can assign the same printer to the infrared port by adding another printer. Windows will keep the same printer driver, and you can then also assign it to the infrared port. You can print from your applications to an infrared printer in the same way as you would to a printer connected to the parallel port. Set the infrared printer as your default printeror select it when you print from within the application. Be sure the computer and printer infrared ports are properly aligned. To transfer files with an infrared connection To transfer files through the infrared port, right-click the name or icon of the file you want to transfer, and click Send To, Infrared Recipient. In Windows 2000 or XP, Infrared Recipient appears only when the computer is aligned with another infrared device and detects it. For higher-performance file transfer, you can also use the Direct Cable Connection software built into Windows 98, or the Wireless Link software built into Windows 2000 and XP. In Windows 98, you need to install the Direct Cable Connection software first: 1. From Control Panel, click Add/Remove Programs. 2. Click Windows Setup, Communications, and select Direct Cable Connection. See the Windows online help for instructions about how to use Direct Cable Connection or Wireless Link.

To use an external monitor
You can connect your computer to an external monitor and then use either displayor both displays at once. To connect an external monitor 1. Click Start, Shut Down, Shut down (Windows 98 or 2000) or Start, Turn Off Computer, Turn Off (Windows XP). 2. Connect the monitor cable from the monitor to the VGA port on the rear of the computer or on the optional port replicator. 3. Connect the monitor to a power source and turn it on. 4. Press the blue standby button to turn on the computer. To switch the display to the external monitor Close the computer lid. OR Press Fn+F5 to cycle through the display options: notebook display, external monitor, both. OR Click Start, Programs, HP Display Settings, HP Display Settings (Windows 98 or 2000), or Start, All Programs, Hewlett-Packard, Notebook, HP Display Settings, HP Display Settings (Windows XP). To adjust monitor resolution 1. Click Start, Settings, Control Panel, then double-click Display (Windows 98 or 2000), or click Start, Control Panel, Appearance and Themes, Display (Windows XP). 2. On the Settings tab, adjust the Screen area.
To use dual display mode (Windows 98 or XP) You can extend the desktop by connecting an external monitor to your notebook. Dual display mode requires that your computer display be set as shown in the table below. Click Start, Settings, Control Panel, then double-click Display (Windows 98), or click Start, Control Panel, Appearance and Themes, Display (Windows XP). Use the Settings tab to make adjustments.
Notebook screen or Display 13.3-inch, 14.1-inch, or 15-inch XGA TFT 15-inch SXGA+ TFT Screen area 800x600 pixels or 1024768 pixels 1400x1050 pixels Colors 256 colors or High Color (16 bit) or True Color (24 bit) High Color (16-bit) or True Color (32-bit)
1. Set your notebook display settings according to the table above. (The display settings vary by model.) 2. Click Start, Shut Down, Shut down (Windows 98) or Start, Turn Off Computer, Turn Off (Windows XP). 3. Connect the monitor cable from the monitor to the VGA port on the rear of the computer or the port replicator. 4. Connect the monitor to a power source and turn it on. 5. Press the blue standby button to turn on the computer. Windows will detect the second monitor and attempt to load the proper display driver. Follow the onscreen instructions. 6. Click Start, Settings, Control Panel, Display, Settings (Windows 98) or Start, Control Panel, Appearance and Themes, Display, Settings (Windows XP). Position the second monitor to the right or left of your notebook display to match your monitor location. 7. Make sure that the Settings box Extend my Windows desktop onto this monitor is checked. You can change the Screen area and Colors settings for the second monitor by selecting Display #2. These settings can be different from your notebook display settings.

Configuring and Expanding Your Computer Installing RAM Modules

Installing RAM Modules

The notebook provides an optional memory expansion slot for installing up to two RAM expansion modules. Use HP PC-133 or higher SDRAM modules only.
If you are using Windows 98, you must expand the hibernate partition before installing more RAM. The hibernate partition (default size, 256MB) must be at least as large as the total RAM installed. (The hibernate partition is used to store the current Windows session before the system enters hibernation.) See Expanding the Hibernate Partition (Windows 98) on page 90. Expanding the hibernate partition will delete all the data on your hard drive, so be sure to back up your data first. Following the partition expansion, you must reinstall Windows from the Recovery CD. Static electricity can permanently damage computer chips. Handle the RAM module only by its three non-connector edges. Otherwise, you may damage the module due to electrostatic discharge. Always discharge the static electricity from your body by touching the metal shielding around the connectors on the rear of the computer before touching or installing the memory module.
To install a RAM expansion module
To increase your computers RAM, you can install a RAM module in the expansion slot on the bottom of the computer. Youll need a small Phillips screwdriver to complete this procedure. 1. Click Start, Shut Down, Shut down (Windows 98 or 2000) or Start, Turn Off Computer, Turn Off (Windows XP). 2. Important: unplug the AC adapter, if present, and remove the battery.
3. Turn the computer over, loosen the screws in the RAM expansion cover (the cover retains the screws), and remove the cover.
4. Insert the RAM expansion module into the connector at about a 30 angle until its fully inserted. Then press down at both sides of the module until it latches. 5. Replace the RAM expansion module door. 6. Insert the battery.
Windows 98 only: if you increase your computers memory to more than 512 MB, the computer will not be able to hibernate unless you also increase the size of the hibernate partition on the hard disksee To recover the factory installation of your hard disk on page 159. You can also replace the computers system RAM modulesee To replace the system RAM module, below.

Your computer normally gets warm during routine operation. If the computer gets abnormally hot Always set the computer on a flat, firm surface, so that air can flow freely around and underneath it. Make sure the air vents are clear. Make sure the fan is working properly. Keep in mind that charging the battery and running games and other programs that drive CPU usage toward 100% can increase the computers temperature. You may also want to test the fan with e-Diagtoolssee Testing Hardware Operation on page 157.

Infrared Problems

By default, the infrared port is not enabled, so you must enable it before you can use it. If you have problems with infrared communication Make sure the line between the two infrared ports is not blocked, and that the ports face each other as squarely as possible. The ports should be no more than 1 meter apart, with no obstructions between them. Sunlight, heat from nearby equipment, or other sources of infrared radiation can cause transmission errors.
Check settings in the BIOS Setup utility: 1. Restart the computer: click Start, Shut Down (or Turn Off Computer), Restart. 2. When the HP logo appears, press F2 to enter BIOS Setup. 3. From the System Devices menu, make sure Infrared port is enabled and FIR mode is selected. 4. Press F10 to save and exit BIOS Setup. Make sure only one application is using the infrared port. For Windows 98, see c:\hp\Drivers\Fir\Readme.txt for additional information.
Keyboard, touch pad, and mouse problems
If the touch pad is difficult to control Customize the touch pad by modifying Mouse properties: click Start, Settings, Control Panel, then double-click Mouse (Windows 98 or 2000), or click Start, Control Panel, Printers and Other Hardware, Mouse (Windows XP). If the pointing devices dont work Dont touch the touch pad while booting or resuming. If this happens, try the following: Press a key on the keyboard to restore normal operation. Suspend and resume operation using the standby button. Restart the computer: click Start, Shut Down (or Turn Off Computer), Restart. If an external mouse doesnt work Standby or shut down the computer before you attach the mouse, to ensure that it will be detected properly. If you want to go back to using the touch pad, you must standby or shut down the computer before you detach the mouse. If the embedded numeric keypad doesnt work Make sure Num Lock is onthat you have pressed Fn+F8 to activate the numeric keypad and that you have pressed the Lock key to turn on number lock. Dont touch the touch pad while booting or resumingsee above.

Memory problems

If a message says you are out of memory Make sure drive C is not running low on free space. If youre using Windows 98, use the Memory Troubleshooter in Windows Help: click Start, Help. If you are having memory problems running MS-DOS programs, use the MS-DOS or Application and Software troubleshooter in Windows Help: click Start, Help (or Help and Support). Not all third-party memory cards have been tested for use with the computer. Please check the HP notebook web site (www.hp.com/notebooks) for a list of approved and tested memory cards.
If memory doesnt increase after adding RAM Make sure your computer is using only PC-133 or higher RAM modules. You may also want to test memory with the e-Diagtoolssee Testing Hardware Operation on page 157.

Modem problems

If the modem seems slow Check for excess static or noise on the line, which reduces the overall transmission speed. If necessary, contact your telephone company about fixing this type of problem. If youre dialing internationally, line noise is often difficult or impossible to eliminate. If you have call-waiting, disable ityour telephone company can provide instructions. Call waiting can cause symptoms similar to static. Eliminate extra connections in the line. If possible, connect directly to the wall jack. Try another telephone line, preferably one normally used for a fax machine or modem. If the modem doesnt dial or no dial tone is detected Check all cables and connections. Connect a standard telephone to the phone line and make sure the line is working. Make sure someone else isnt using the same phone line. Try another telephone line, preferably one normally used for a fax machine or modem. If youre in a foreign country, the dial tone may not be recognized by the modem. In Control Panel, open Modems (Windows 98) or Phone and Modem Options (Windows 2000 or XP), and try disabling the option that waits for a dial tone. Phone message recording services provided by phone companies use a broken dial tone to indicate that a message is waiting. This can prevent the computer from detecting a dial tone.
If the modem dials incorrectly Check the telephone number you entered, including any digits required for outside access or long distance. In Control Panel, open Modems (Windows 98) or Phone and Modem Options (Windows 2000 or XP). Check the dialing optionslook for duplicate digits for outside access or long distance. Make sure the number youre calling isnt busy. If youre in a foreign country, the dial tone may not be recognized by the modem. In Control Panel, open Modems (Windows 98) or Phone and Modem Options (Windows 2000 or XP), and try disabling the option that waits for a dial tone. If you have call-waiting, disable ityour telephone company can provide instructions. If the modem will not connect at 56K speed The host modem may not support a 56K (V.90) connection speed. The speed at which you connect depends on several factors, such as the current condition of the telephone line. Try connecting another time. If the modem will not connect at any speed Make sure youre using an analog telephone line. You must not use a digital line. In a hotel, ask for a data line. Make sure the telephone line goes from the RJ-11 modem phone jack on the right side of the computer to the telephone jack on the wall. If you have a single telephone line for voice and modem use, make sure no one else is using the line and that the phone is not off the hook. Try another telephone line, preferably one normally used for a fax machine or modem. Contact your Internet Service Provider (ISP). Its possible that service may be unavailable temporarily or that your settings are incorrect. Try restarting your computer and attempt another connection. Try an alternative dial-in number. Try disabling error correction and data compression. Download the latest modem driver from the technical support area of the HP notebook web site www.hp.com/notebooks.

Make sure your computer supports the problem PC card: check the HP notebook web site (www.hp.com/notebooks) for a list of approved and tested PC cards. Try the card in another computer. Certain Xircom CE2 (IIps) LAN cards conflict with the game port device in Windows 2000. Contact Xircom to see if your card is one of these. If an I/O card stops communicating properly The card may have been reset if the computer in on standby or turned off. Exit any applications, then remove and reinsert the card. If a PC card modem is not working Disable the internal modem. 1. Open the hardware Device Manager: click Start, Settings, Control Panel, System (Windows 98 or 2000) or Start, Control Panel, Performance and Maintenance, System (Windows XP). 2. Double-click Modem to list the current modem devices. 3. Double-click the internal modem, then select the option to disable the modem.

Performance problems

For best performance with Windows 2000 or XP, your computer should have at least 96 to 128 MB of memory (RAM). If the computer pauses or runs sluggishly This may be normal Windows behavior. Background processing can affect response time. Press CTRL+ALT+DEL to see if an application is not responding. Restart the computer click Start, Shut Down (or Turn Off Computer), Restart. Certain background operations (such as virus-scanning software) can affect performance. Some file browsers may be unresponsive while theyre processing a graphic image or waiting for broken network connections to time out.
If the computers hard disk drive frequently runs (as indicated by the hard drive light on the front of the computer) while the computer appears to be paused or running slowly, Windows is likely spending excess time writing to its swap file on the computers hard disk. If this occurs frequently, consider installing additional memory. Check the amount of available free disk space. Delete temporary and unneeded files. If the computer stops responding Press CTRL+ALT+DEL and end any application that is not responding. Slide and hold the power switch for five seconds to turn off and reset the computer. Then press the standby button to turn the computer back on. If nothing happens, insert a straightened paper clip into the system-off switch on the left side of the computer. Then press the standby button to turn the computer back on.

Port replicator problems

If a port on a port replicator isnt working Make sure AC power is connected. While undocked, try using the corresponding notebook port. See the manual for the port replicator.
Power and battery problems
If the computer turns off immediately after it turns on Battery power is probably extremely low. Plug in the AC adapter or insert a newly charged battery. If the computer keeps beeping The computer beeps repeatedly or displays a warning when the battery is low. Save your work, shut down the computer immediately, and insert a charged battery or plug in the AC adapter.

If the computer has a short operating time Try conserving power by setting power timeouts to shorter periods. In Windows, you can adjust these settings in the Power Management (or Power Options) Properties window in Control Panel. If you are running any applications with an automatic save feature, such as MS Word for Windows, you can extend the save time or disable this feature to reduce hard disk access. If the operating time has become shorter and the battery is more than a year or two old, you may need to replace the battery. Set the display brightness to the lowest comfortable level. Heavy modem use can affect battery operating time. PC card use can affect battery operating time. The battery gauge may need to be calibrated. Restart the computer, press F6 when the HP logo appears, and follow the instructions that appear onscreen. This process calibrates the battery, and requires four to five hours. You cannot use the computer during this process. If the battery doesnt charge Make sure the AC adapter is plugged into the power source and that the light on the adapter is on. If youre using a power strip, remove the AC adapter from the power strip and plug it directly into a wall outlet. Make sure the battery is fully installed and locked in place. Turn off the computer, then make sure the battery contacts are clean and that the AC adapter cables are fully plugged in. Move the computer away from any nearby heat source. Unplug the AC adapter and allow the battery to cool down. An elevated battery temperature prevents charging. If another battery is available, try it. If another AC adapter is available, try it. If the Time Remaining percentage for the battery is not correct The Time Remaining value on the power (battery) icon is an estimate based on your current usage, not a precise value. If the computer doesnt standby as expected
If you have a connection to another computer, the computer doesnt standby if the connection is actively in use. If the computer is performing an operation, it normally waits for the operation to finish. If the computer doesnt automatically hibernate as expected For Windows 2000 or XP, make sure hibernate support is enabled: from Control Panel, open Power or Power Options, then click the Hibernate tab. Also, check the Power Schemes tab. Make sure the Hibernate timeouts for both AC power and battery power are not set to Never. For Windows 98, if your computer has more than 512 MB of RAM, you must expand the hibernate partition on the hard disksee To replace the system RAM module on page 89. If the Standby option is missing from the Shut Down window (Windows 98) Do not allow Windows 98 to disable APM. It may prompt you to do this in certain situationsalways answer No. If the Windows 98 Standby option is missing, restore it as follows: 1. In Control Panel, double-click System. 2. On the System Manager tab, expand the System Devices, select Advanced Power Management, and click Remove. 3. Restart the computer. 4. In Control Panel, double-click Add New Hardware, and follow the prompts to install support for APM. 5. Restart the computer.

Windows 98 supports the FAT16 and FAT32 file systems. Windows 2000 supports the FAT16, FAT32, and NTFS file systems. Windows XP supports the NTFS file system.
To replace a damaged Recovery CD
If you lose or damage the Recovery CD, call the HP Customer Care Center for information about replacing it. See To call HP for service and support on page 129 for the phone number.
To update the HP notebook BIOS
Hewlett-Packard may provide updates to the BIOS to enhance the capabilities of the computer. You can use e-Diagtools for Windows to download and install these updates as they become available.
A BIOS update replaces the previous version, so it is important that you follow these instructions exactly. Otherwise, the computer may be damaged. The BIOS update process resets the configuration settings in the BIOS Setup utility, except for BIOS passwords. 1. In Windows, exit any programs that are running. 2. Remove any PC cards. 3. If the notebook is docked, undock it.
4. Connect the AC adapter to the notebook. 5. Connect any cables or equipment needed to connect to the Internet. 6. Click Start, Programs (or All Programs), HP e-Diagtools, e-Diagtools for Windows. 7. Click Update, select Download New and click OK. Follow the instructions that appear. Once the update process begins, do not interrupt it. The first time you make an Internet connection from this program, click Change Settings in the Connect window to define your connection settings. 8. When the process is completed, reset the system: insert a pin or straightened paper clip into the recess on the left side of the computer, underneath the PC card eject buttons. BIOS updates are also available from the HP Customer Care web site (www.hp.com/go/support).
To recover an application
If you remove an application from your hard disk and later decide you want it back, or if you accidentally delete application files, you can reinstall the original software. The setup programs for most of the applications that were factory-installed on your system are included on your hard drive in c:\hp\programs. Each application has its own folder that includes a file of instructions (readme.txt). A few factory-installed applications do not have installation programs on the hard drive. If your computer came with one of these applications (for example, Microsoft Works, Microsoft Encarta, or Microsoft Money), you can reinstall it by using the appropriate CD-ROM.

Default Auto

Infrared port (selected models) Base I/O address Interrupt Mode

Disabled 2F8h IRQ3 FIR

DMA channel LCD Status Panel Display LCD Status Panel Date Format LCD Status Panel Time Format Security Menu User Password Is Administrator Password Is Set User Password
DMA1 Enabled mm/dd/yy (month/date/year) hh:mm Default
Shows if a user password is set. Shows if a supervisor password is set. Sets, changes, or clears user password, after supervisor password is set. Password length can be no longer than 8 characters, 0-9, A-Z. Sets, changes, or clears supervisor password. This password protects BIOS Setup settings. Sets whether a user password is required when the computer boots.

Clear Clear

Set Administrator Password Password Required to Boot

Disabled

Boot Menu Indicates boot order of drives (change order with F5 and F6 keys). Exit Menu Exit Saving Changes Exit Discarding Changes Load Setup Defaults Saves Setup changes to CMOS, exits, and restarts. Discards Setup changes since last save, exits, and restarts. Does not affect security, date, or time changes. Restores default settings, stays in Setup. Does not affect security, date, or time changes.
Default Hard Drive CD-ROM Drive Removable Devices

Hardware specifications

Technology codes identify different models of a notebook PC. These two-letter codes are found near the serial number on the bottom of the computer.
Physical Attributes Size: 13.03 x 10.76 x 1.59 (331 x 273.4 x 40.5mm) for 13.314.1 TFT LCD 13.03 x 10.87 x 1.63 (342 x 276.6 x 41.5mm) for 15 TFT LCD Weight: 7.2lbs (3.3kg) minimum 933- to 1200-MHz Intel Mobile Pentium III processor with Speed Step technology or 866- to 933-MHz Intel Celeron processor Intel 830-MG/ICH3-M and Intel VCH PC133 compliant Integrated VGA SpeedStep II support Two slots for RAM expansion (PC133) up to 384MB 10- to 30-GB removable hard disk drive 1.44-MB floppy disk drive 24X CD-ROM, 8X DVD, or other drive (or higher) 13.3/14.1/15 XGA (1024x768) or 15 SXGA+ (1400x1050) TFT LCD display Supports simultaneous LCD/CRT, LCD/CRT/TV operation Integrated VGA 8- to 32-MB video memory (depending on model, shared with system memory) Supports NTSC and PAL TV Dual display for LCD and external monitor or TV 87/88/90-key spill-proof QWERTY keyboard with 101/102 key emulation Embedded numeric keypad 12 function (Fn) keys Touch pad with on/off button Left and right click buttons, center scroll button Built-in microphone Two stereo speakers CD player with built-in control buttons and status display (selected models) Headphone-out and microphone-in

Core Logic

RAM Mass Storage CD/DVD drive Graphics

*B *Cn *NCn

S-registers (Ambit)

Register
S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S14 S16 S18 S19 S20 S21 S22 S23 S24 S25 S26 S27 S28 S29 S30 S31 S32 S33 S36 S37 S38 S39 S40 S41 S46 S48 S82 S86 S91 S92 S95
Rings to auto-answer Ring counter Escape character Carriage return character Line feed character Backspace character Wait time for dial tone Wait time for carrier Pause time for dial delay modifier Carrier detect response time Carrier loss disconnect time DTMF tone duration Escape prompt delay General bit mapped options status Test mode bit mapped options status (&T) Test timer AutoSync options AutoSync HDLC address or BSC Sync character V.24/general bit mapped options status Speaker/results bit mapped options status General bit mapped options status Sleep inactivity timer Delay to DTR off RTS-to-CTS delay General bit mapped options status General bit mapped options status Flash dial modifier time Disconnect inactivity timer General bit mapped options status XON character XOFF character LAPM failure control Line connection speed Delay before forced hangup Flow control bit mapped options status General bit mapped options status General bit mapped options status Data compression control V.42 negotiation control LAPM break control Call failure reason code PSTN transmit attenuation level Fax transmit attenuation level Result code messages control

Range/units

0-255/rings 0-255/rings 0-255/ASCII 0-127/ASCII 0-127/ASCII 0-255/ASCII 2-255/s 1-255/s 0-255/s 1-255/.1 s 1-255/.1 s 50-255/.001 s 0-255/.02 s

Default

(8Ah) 52 (34h) 117 (75h) 62 (3Dh) (49h) (C2h) 17 (11h) 19 (13h) 104 (68h) 195(C3h) 128 (40h) 0-(country dependent) 10 (country dependent) 0

0-255/s 0-255

0-255/s 0-255/s or.01s 0-255/.01 s
0-255/10 ms 0-255/10 s 0-255/ASCII 0-255/ASCII

0-255/s

0-15/dBm 0-15/dBm
Selected result codes (Ambit)

Meaning

OK CONNECT RING NO CARRIER ERROR CONNECT 1200 NO DIAL TONE BUSY NO ANSWER
Specifications and Regulatory Information Safety Information

Safety Information

Power cords
The power cord supplied with the notebook AC adapter should match the plug and voltage requirements for your local area. Regulatory approval for the AC adapter has been obtained using the power cord for the local area. However, if you travel to a different area or need to connect to a different outlet or voltage, you should use one of the power cords listed below. To purchase a power cord (including one for a country not listed below) or a replacement AC adapter, contact your local Hewlett-Packard dealer or sales office. For any power cord with a fused plug, if you have to replace the fuse, be sure to install an approved fuse. Country

Japan Telecommunications Approval JATE approval number: A00-0143JP, A00-0434JP Name of Equipment: T18M038.00, T18N040.00

Russia

International
Products sold internationally by Hewlett-Packard and its authorized dealers meet the specifications listed on the following pages.
Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014)
Manufacturers Name: Manufacturers Address: Hewlett-Packard Company Hewlett-Packard Company Mobile Computing Division 19310 Pruneridge Ave. Cupertino, CA 95014, U.S.A. Notebook PC Omnibook XE3 (OB XE3), Pavilion N5D series Notebook PC (D is any number 09) All IEC 950: 1991 +A1,A2,A3,A4 / EN 60950: 1992 +A1,A2,A3,A4,A11 IEC 60825-1: 1993 +A1/EN60825-1: 1994 +A11 Class 1 (LED) GB4943-1995 CISPR 22: 1997 / EN 55022: 1998 Class B [1] CISPR 24:1997 / EN 55024: 1998 IEC 61000-3-2:1995 / EN 61000-3-2:1995 +A1: 1998 +A2: 1998 IEC 61000-3-3:1994 / EN 61000-3-3:1995 GB9254-1988 FCC Title 47 CFR, Part 15 Class B/ANSI C63.4: 1992 AS/NZS 3548: 1995 Rules and Regulations of Class Telecom: Supplementary Information: TBR 21: 1998, EG 201 121: 1998
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC, amended by 92/31/EEC & 93/68/EEC, and the R&TTE Directive 1999/5/EC (Annex II) and carries the CE marking accordingly. [1] The product was tested in a typical configuration with Hewlett-Packard Personal Computer peripherals. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The HP F1454A and F1781A ac/dc adapter used with this product is designed to operate on all power systems, other than IT power systems.
declares that the following product Product Name: Model Numbers: Product Options: Safety:
conforms to the following product specifications
Corvallis, OR, July 1, 2001
European Contact for regulatory topics only: Hewlett Packard GmbH, HQ-TRE, Herrenberger Strae 130, 71034 Boeblingen, Germany. Fax: +143143). USA Contact: Hewlett Packard Co., Corporate Product Regulations Manager, 3000 Hanover Street, Palo Alto, CA 94304, U.S.A. Phone: +1 (415) 857-1501.
AC adapter connecting, 24 location, 18 accessories, 14 ALT GR key, 34 AOL as your ISP, 65 connecting to, 64 disconnecting, 65 e-mail, 67 Applications key, 33 applications, recovering, 161 AT commands, 66, 169 audio adjusting volume, 136 connecting devices, 77 troubleshooting, 136 auto/airline adapter, 14 inserting CD, 40 location, 16 removing CD, 40 troubleshooting, 137 CDs creating or copying, 41 inserting and removing, 40 recommended media, 41 cleaning the computer, 50 click buttons location, 16 using, 37 computer caring for, 48 cleaning, 50 overheating, 141 protecting, 141 registering, 27 resetting, 30 testing, 157 turning on and off, 25 connecting audio devices, 77 external monitor, 79 IEEE1394 devices, 84 infrared device, 77 LAN, 71 modem, 63 parallel device, 76 TV set, 81 USB device, 76 copyrights, 2 Corporate Evaluators Guide, 15 quality, 139 screen area, 35 settings, 35 troubleshooting, 138 TV set, 81 docking connector, 19 port replicator, 74 drivers downloading, 91 updating, 128 DVD drive access light, 20 buttons, 21 inserting DVD, 40 location, 16 playing movies, 40 removing DVD, 40 setting region code, 40, 138 troubleshooting, 137 DVDs inserting and removing, 40 playing, 40 region code, 40, 138