Product environmental attributes THE ECO DECLARATION
Brand * Company name * Contact information * Internet site * Additional information Hewlett-Packard Hewlett-Packard Company Hans Wendschlag http://www.hp.com/hpinfo/globalcitizenship/environment/contactemail.html http://www.hp.com/hpinfo/globalcitizenship/environment/ Logo
The company declares (based on product specification or test results based obtained from sample testing), that the product conforms to the statements given in this declaration.
Type of product * Commercial name * Model number * Issue date *
Intended market * Additional information

Consumer Desktop PC

HP Pavilion Slim line s5311f PC S5000-S5300 04/18/2010 Global Europe Japan U.S. Other
This is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version. The declaration may be published only when all rows and/or fields marked with a * are filled-in (n.a. for not applicable).
Quality Control Item Additional information regarding each item may be found under P14. QC1 * QC2 * The company enforces an internal quality control scheme to ensure the correctness of this eco declaration The company is a member of an eco declaration system that enforces regular independent quality control such as organized by IT-Fretagen (see http://www.itforetagen.se).

Requirement met Yes No

Annex B of ECMA-370 2nd Edition, December 2006

Page 1 (5)

Model number * Issue date *

S5000-S5300 04/18/2010

Product environmental attributes - Legal requirements Item P1 P1.1* P1.2* P1.3* *=mandatory to fill in. Additional information regarding each item may be found under P14. Hazardous substances and preparations Products do not contain lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) as specified in EU 2002/95/EC and its amendments Products do not contain Asbestos (EU 76/769/EEC, amendment 1999/77/EC) Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC), hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1-trichloroethane, methyl bromide (EU : Regulation (EC) No. 2037/2000, 2038/2000, 2039/2000) Products do not contain polychlorinated biphenyl (PCB), polychlorinated terphenyl (PCT), (EU 76/769/EEC)
Requirement met Yes No n.a.

P1.4* P1.5*

Products do not contain short chain chloroparaffins (SCCP) with 10-13 carbon atoms in the chain containing at least 48% per mass of chlorine in the SCCP as specified in Norwegian regulation relating to restrictions on the use of certain dangerous chemicals 20.12.2002 Textile and leather parts with direct skin contact do not contain Tri-(2,3,-dibromopropyl)-phosphate (TRIS), Tris(aziridinyl)-phosphineoxide (TEPA), polybrominated biphenyl (PBB) (EU 76/769/EEC) Textile and leather parts with direct skin contact do not contain Azo colourants that split aromatic amines as specified in EU 76/769/EEC, amendment 2003/3/EC Wooden parts do not contain arsenic and chromium as a wood preservation treatment as well as pentachlorophenol and derivatives (EU 76/769/EEC) Parts with direct and prolonged skin contact do not release nickel in concentrations higher than specified in 76/769/EEC, amendment 94/27/EEC Batteries If hazardous batteries (as defined in 91/157/EEC) are used in the product they are easily removable and labelled with the disposal and the substance logo (as defined in 91/157/EEC, 93/86/EEC) If batteries are used in the product they do not contain mercury in concentrations higher than specified in 91/157/EEC If batteries are permanently installed in the product, information on the environmentally hazardous substances and safe removal method is listed in the user manual (91/157/EEC) Electrical safety, EMC and connection to the telephone network The product meets the Low Voltage Directive (LVD) regarding electrical safety (73/23/EEC & 93/68/EEC) The product meets the EMC Directive regarding electromagnetic compatibility (89/336/EEC / 2004/108/EEC th after June, If product is intended for connection to a public telecom network or contains a radio transmitter, it meets the EU R&TTE Directive (1999/5/EC) The product is CE-marked and a Declaration of Conformity is available (93/68/EEC) Consumable materials If a photo conductor (drum, belt etc.) is used in the product, it does not contain cadmium in concentrations higher than specified in (76/769/EEC and 91/338/EEC) If ink/toner is used in the product, it does not contain cadmium in concentrations higher than specified in (76/769/EEC and 91/338/EEC) If the ink/toner formulation/preparation is classified as hazardous according to EU Directive 1999/45/EC, and as amended, the product/packaging is labelled and a Material Safety Data Sheet (MSDS) in accordance with (99/45/EC & 2001/58/EC) is available. Product packaging The sum of the concentration levels of lead, cadmium, mercury, and hexavalent chromium present in packaging or packaging components does not exceed 0,01% by weight (94/62/EC). Plastic packaging material is marked according to ISO 11469 referring ISO 1043.(97/129/EEC) The product packaging material is free from CFC/HCFC. Treatment information Information for recyclers/treatment facilities (e.g. as requested by 2002/96/EC) is available.

P1.6* P1.7* P1.8* P1.9* P2 P2.1* P2.2* P2.3* P3 P3.1* P3.2* P3.3* P3.4* P4 P4.1* P4.2* P4.3*
P5 P5.1* P5.2* P5.3* P6 P6.1*

Page 2 (5)

Product environmental attributes - Market requirements - Environmental conscious design Item *=mandatory to fill in. Additional information regarding each item may be found under P14. P7 Design, Disassembly, recycling P7.1* Parts that have to be treated separately are easily separable P7.2* P7.3* P7.4* P7.5 P7.6* P7.7* P7.8* P7.9. P7.10 P7.11* P7.12* P7.13* P7.14 P7.15 P7.16 P7.17 P7.18 P7.19 P7.20 P8 P8.1* P8.2* P8.3 P9 9.1 Mode On-max Onnormal On-idle Save 1 Save 2 Off 1 Off 2 No load TEC P9.2* P9.3 * * * * * Plastic materials in covers/housing have no surface coating. Plastic parts >100g consist of one material or of easily separable materials. Plastic parts >25g have material codes according to ISO 11469 referring ISO 1043. Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools. Labels are easily separable. (This requirement does not apply to safety/regulatory labels). Product lifetime Upgrading can be done e.g. with processor, memory, cards or drives Upgrading can be done using commonly available tools Spare parts are available after end of production for: 3 years Service is available after end of production for: 5 years Material and substance requirements Product cover/housing material type: Material type: HIPS Material type: ABS Electrical cable insulation material of power cables are halogen free (including PVC) Electrical cable insulation material of signal cables are halogen free (including PVC) All cover/housing plastic parts >25g are halogen free All printed circuit boards (without components) >25g are halogen free Chemical specifications of flame retardants in cover / housing plastic parts >25g according ISO 1043-4:

Material type:

Chemical specifications of flame retardants in printed circuit boards (without components) >25g according ISO 1043-4: Weight of recycled material in plastic parts is 0 Plastic parts >25g are free from flame retardant substances/preparations above 0.1% classified as R45/46, R50/51/53 and R60/61 (67/548/EEC) Light sources are free from mercury If mercury is used specify: Number of lamps: and max. mercury content per lamp: mg Batteries Product does not contain batteries defined as hazardous according to 91/157/EEC Battery chemical composition: Li Ion Batteries meet the requirements of the following voluntary program/s: Energy consumption For the product the following power levels or energy consumptions have been measured: Power level at Time (s) to <mode> Mode description * Volts W W W W W W W W to to to to to to * * * * * * * External power supplies/charger plugged in but disconnected from the product

Reference/ Standard * * * * * * * * *
kWh/y Typical Energy Consumption per year
Information about the energy save function is provided with the product. The product meets the energy requirements of the following voluntary program/s: ENERGY STAR MOU Others specify: ENERGY STAR MOU (Version 5.0)

Page 3 (5)

Product environmental attributes - Market requirements (continued) Requirement met Item * = mandatory to fill in. Additional information regarding each item may be found under P14. Yes No n.a. P10 Emissions Noise emission Declared according to ISO 9296 Declared A-weighted P10.1 Mode Mode description Declared sound pressure level LpAm (dB) A-weighted sound power Operator position Bystander positions level LWAd (B) Desktop or Deskside Idle Operation Other mode Measured according to: P10.2 ISO 7779 Other ECMA-74 (only if not covered by ECMA-74 with LpAm measurement distance m) * Fans on, HDD spinning (if applicable) * Fans on, HDD spinning * 3.5 * 4.1 27.(only if product is not operator attended)
The product meets the acoustic noise requirements of the following voluntary program/s: Chemical emissions from printing products

P10.3*

Test performed according to ECMA-328 standard The test covers: Dust Ozone
, other specify: Styrene Benzene TVOC
The product meets the chemical emission requirements of the following voluntary program/s: Electromagnetic emissions
P10.5 P11 P11.1* P11.2* P11.3* P12 P12.1* P12.2* P12.3* P13 P13.1* P13.2* P13.3* P13.4*
Computer display meets the requirement for low frequency electromagnetic fields of the following voluntary program/s: Consumable materials for printing products A Material Safety Data Sheet (MSDS) is available for the ink/toner preparation, even if not legally required (see P4.3). Paper containing recycled fibres that meets the requirements of EN12281 can be used. 2-sided (duplex) printing/copying is an integrated product function. Ergonomics for computing products The computer system meets the ergonomic requirements of EN 29241-3, -7, -8 for CRT displays and EN-ISO13406-2 for flat panel displays. The product keyboard meets the requirements of ISO 9995 and EN 29241-4. The computer input device meets the requirements of ISO 9241-9. Packaging and documentation Product packaging material type(s): Polyethylene low density weight (kg): 0.015 Product packaging material type(s): EPS (Expanded Polystyrene) weight (kg): 0.051 Product packaging material type(s): Corrugated weight (kg): 0.325 Product plastic packaging is halogen free (including PVC) User and product documentation do not contain chlorine bleached paper User and product documentation contain recycled paper

Page 4 (5)

P9 9.1
Energy consumption For the product the following power levels or energy consumptions have been measured: Power Consumption AC Input Voltage at 100 VAC +/- 5 VAC, 50 Hz +/- 3 Hz 50.623W Power Consumption AC Input Voltage at 115 VAC +/- 5 VAC, 60 Hz +/- 3 Hz 51.181 Power Consumption AC Input Voltage at 230 VAC +/- 5 VAC, 50 Hz +/- 3 Hz Default Time Settings to Enter Energy Saving Mode Reference Standard (test method)
Power Consumption Mode Description
On-Idle (ENERGY STAR Idle (S0)) ENERGY STAR Sleep (S3) (WOL enabled) ENERGY STAR Standby (Off) (S5) (WOL disabled)

50.454W

Not Applicable
ENERGY STAR Program Requirements for Computers: Ver. 5.0 ENERGY STAR Program Requirements for Computers: Ver. 5.0 ENERGY STAR Program Requirements for Computers: Ver. 5.0

3.096W

3.093W

3.260W

30 minutes (system unit) Not Applicable

1.689W

1.697W

1.857W

P14 Additional information All 1. Product environmental information contained in this declaration is valid as of the date the declaration is published. Changes to sections external standards referenced in the IT Eco-Declaration may invalidate some information contained in this declaration over time. P9 1. Energy efficiency data listed is for an ENERGY STAR compliant product if offered within the model family. HP computers marked with the ENERGY STAR Logo are compliant with the applicable U.S. Environmental Protection Agency (EPA) ENERGY STAR specifications for computers. If a model family does not offer ENERGY STAR compliant configurations, then energy efficiency data listed is for a typically configured model. 2. For more information about HPs ENERGY STAR qualified products, go to hp.com: http://www.hp.com/ and select the applicable market segments and product categories for more information. 3. Energy Efficiency information published on the ECMA 370 The Eco Declaration represents a typically configured product base model meeting ENERGY STAR specifications if offered within the model family. If optional components or modules are added, like extra hard disks or graphic cards etc, these can change the energy efficiency data listed above. 4. Power consumption in the Off / Apparent Off mode is measured and reported with the network interface controller (NIC) WOL disabled. P10 1. Acoustic noise information published on the ECMA 370 The Eco Declaration represents a typically configured product base model only. If optional items with moving parts are added, like extra hard disks or graphic cards with fans etc, these can change acoustic noise values for which HP can take no responsibility.
NOTE: Additional lines may be inserted to declare further items, by positioning the cursor at the far right of the row and hitting the [Enter] key.

Product End-of-Life Disassembly Instructions
Product Category: Personal Computers Marketing Name / Model [List multiple models if applicable.] HP Pavilion Slim line s3750t series
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB/PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords Gas Discharge Lamps Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Components and waste containing asbestos EL-MF877-00 Template Revision B PSG instructions for this template are available at EL-MF877-01 Include the cartridges, print heads, tubes, vent chambers, and service stations. The QTY may vary from different power supply models With a surface greater than 10 sq cm MB, PSU, IO card All types including standard alkaline and lithium coin or button style batteries Mainboard For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps 0 0

Page 1

Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances
2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Description #1 Phillips screw driver NO 2
3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Remove Access Panel from the chassis take off Front Panel Remove all the cables from PCA remove PCI & PCI-E card from the PCAtake off Front Panel Remove the Mini_PMD BAY. Remove ODD from the system Remove HDD CAGE from the system Remove the ODD CAGE Remove the Motherboard Take off CMOS battery Take away the Power Open the metallic crust Separate the capacitor
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Screw driver Phillips screw driver NO 2
EL-MF877-00 Template Revision B PSG instructions for this template are available at EL-MF877-01

Page 2

1. Remove Access Panel from the chassis Unfasten the 3pcs screws, and take off the Access Panel
2. take off Front Panel Pull the button up and then take off the front panel

3. Remove all the cables from PCA Press the button to pull power cords off Pull the other cords off PCA
4. remove PCI & PCI-E card from the PCA Use screw driver to take off the screw as shown in the Photo,take away the slot lock,and then take away the PCI.

Page 3

5. Remove the Mini_PMD BAY. Pull the black plastic hander,and tack away the Mini_PMD BAY.

6 Remove

ODD from the system
Rotate the screw driver to take off the ODDhave the metallic lock pulled by left hand and right hand push ODD out off the base.

7 Remove

HDD CAGE from the system
Rotate the screw shown in photo and Remove HDD CAGE from the system

8 Remove

the ODD CAGE
Rotate the 3 pcs screws shown in photo and Remove ODD CAGE from the base.

Page 4

9.Remove the Motherboard Remove 4 pcs screws and take off the Motherboard.
10. Take off CMOS battery Pull the battery holder as shown in the photo, and then the battery will off the PCA
11. Take away the Power Unfasten the 4 pcs screws and take away the Power.
12. Open the metallic crust Unfasten the 5 pcs screws and open the metallic crust.

Page 5

13. Separate

the capacitor

use screw driver to separate the capacitor from the main board of power.

Page 6