1 Open the battery compartment door by pushing it out and then swinging it open. 2 Insert four AA batteries (supplied), making sure that the +/ electrodes are facing the proper direction (see the diagram on the inside of the cameras battery compartment). Note For replacement, use only photo-quality alkaline, photo-lithium, or rechargeable nickel-metal hydride (NiMH) batteries.
SJUG.book Page 4 Tuesday, October 9, 2001 1:35 PM
Step 3: Turn the camera on
To turn the camera on, slide the ON/OFF POWER ( ) switch to the right and release it. The status LCD (liquid crystal display) on top of the camera turns on and displays the camera status. Note The icons that appear on the status LCD are discussed throughout this guide. For more information, see Appendix A: Reference on page 69.
To turn the camera off, slide the switch to the right again and release it. The status LCD shuts off and goes blank.
Step 4: Choose the camera language
The first time you turn the camera on, it prompts you to choose the language you want to use for the camera menus. 1 Turn the CONTROL ( ) dial to scroll to the language you want to use. 2 Press the dial to select the language.
If you chose the wrong language, you can change it by using the Setup menu.
SJUG.book Page 5 Tuesday, October 9, 2001 1:35 PM
Step 5: Set the camera date and time
After you select the camera language, the camera prompts you to enter the current date and time. After you have set the cameras clock, it records the date and time at which you take each picture. 1 Turn the dial to point to the date format, and then press the dial to change it. You can choose MDY (mm/dd/yyyy), DMY (dd/mm/yyyy), or YMD (yyyy/mm/dd). 2 Turn the dial to point to the date, and then press the dial. 3 Turn the dial to change the number, and then press the dial to confirm it. 4 Set the remaining values in the same way. 5 To save your settings, select Exit. The image display turns off. Your camera is now ready to take pictures.

Automatic power-off

To conserve battery power, the camera automatically turns off after 5 minutes if you do not press a button.
SJUG.book Page 6 Tuesday, October 9, 2001 1:35 PM

Using the control dial

Use the dial to: scroll through images of pictures that you have taken. make selections from the camera menus, which allow you to manipulate your images and adjust the camera settings. The dial operates in two distinct ways: you can press it straight down, or you can turn it left or right.

To review your images

1 Press the dial to begin reviewing your pictures on the image display on the back of the camera. 2 Turn the taken. dial to scroll through images of pictures you have

When you are taking a picture, be careful to keep your fingers away from the lens and the flash. The following illustrations give you examples of how to hold the camera.
SJUG.book Page 10 Tuesday, October 9, 2001 1:35 PM
Using automatic focus and automatic exposure
The camera automatically focuses and adjusts the exposure for the current lighting conditions when you press the SHUTTER button halfway down. The camera adjusts the focus and exposure automatically even if you press the SHUTTER button all the way down without pausing. But you are more likely to catch the perfect shot, especially when you are photographing an active subject, if you set the cameras focus and exposure early. To do this, press the SHUTTER button halfway down, and then press the SHUTTER button all the way down at the exact moment you wish to capture the image. Note If the camera cannot find a focus or if the exposure will be longer than 1/30 second, a yellow light appears to the right of the viewfinder. You can still take the picture, but the results might not be optimal.

Using focus lock

The automatic focus feature focuses on the subject in the middle of the picture and requires good contrast within that subject area. If you do not want your subject to be in the middle of the image or if the subject lacks contrast, use focus lock.
SJUG.book Page 11 Tuesday, October 9, 2001 1:35 PM
1 Frame a subject that is the same distance from the lens as your subject. 2 Press the SHUTTER button halfway down to lock the focus. Wait until you see the green light next to the viewfinder. 3 Keeping the SHUTTER button pressed halfway down, move the camera to frame your subject. 4 Press the SHUTTER button all the way down to take the picture.

Previewing your pictures

Instead of looking through the viewfinder to frame a picture, you can use the image display to preview a picture. The image display shows exactly what your picture will look like, whereas the viewfinder is slightly accurate. Preview your picture on the image display when precise framing is important, especially when you are taking a close-up shot. Note Using the image display consumes a lot of battery power. To conserve battery power, the camera automatically turns off the image display after 60 seconds if you do not press a button.

To preview a picture

1 Turn the camera on. 2 Press the button to turn the image display on.
3 Frame your picture in the image display by pointing the camera lens at your subject. 4 Press and hold the SHUTTER button halfway down to allow the camera to adjust the focus and exposure. 5 When you see the steady green light to the right of the viewfinder, press the SHUTTER button all the way down to take the picture. To turn the image display off, press the button.

SJUG.book Page 12 Tuesday, October 9, 2001 1:35 PM
Tips for taking the best pictures
Try to fill the entire frame with your subject and exclude unwanted detail. Keep the sun behind you or at your side, not directly overhead or in front of you. If the light is behind your subject, use the FLASH ON setting to increase the light on the front of your subject. When the ambient light is low, use the flash. Make sure you keep the subject within the flash range (2.5 m, or about 8 feet).

2.5 meters

If you use the FLASH OFF setting in low light, use a tripod to steady the camera during exposure. The camera takes about a second to focus and adjust the exposure when you press the SHUTTER button halfway down. Wait until you see the steady green light to the right of the viewfinder, then press the SHUTTER button all the way down to take the picture. If this is the first time you are using a digital camera, you might want to practice to become accustomed to the timing. If a yellow light appears to the right of the viewfinder when you press the SHUTTER button, the camera cannot find a focus or the exposure will be longer than 1/30 second (or both). Try the following: Make sure that you are not too close to your subject and that you frame your pictures with the desired subject in the center. The cameras automatic focus has a range of 20 cm
SJUG.book Page 13 Tuesday, October 9, 2001 1:35 PM
(about 8 inches) to infinity and focuses on the object in the center of the frame. If the light on your subject is low, wait for better natural light or use the flash. For more information, see Using the flash on page 21. If the light on your subject is low and you are using the FLASH OFF setting, the exposure could be longer than 1/30 second. To steady the camera, mount it on a tripod. Set the cameras automatic focus and automatic exposure on a different subject by using focus lock.
Avoid taking flash photos in front of reflective objects like mirrors or glass to prevent bright spots in your photos. Although the camera has an electronic automatic focus system, some conditions might cause the camera to focus improperly. Some examples are in the following table. Conditions
Black or very dark objects Objects that have no distinct or consistent form

Examples of subjects

Dark clothing Fountains, waterfalls, waves, smoke, flame, fireworks, a subject in mist or fog Glass, mirrors, automobiles Neon signs, fluorescent lamps, television images, sun rays through trees Baseballs, hummingbirds, race cars Wire netting or fencing, latticework Sunsets, candlelight
Glossy and reflective surfaces Multiple or flickering light sources
Rapidly moving objects Non-solid objects Insufficient light
SJUG.book Page 14 Tuesday, October 9, 2001 1:35 PM
SJUG.book Page 15 Tuesday, October 9, 2001 1:35 PM

Reviewing your images

After you have taken some pictures and they are stored in the camera, you can view them by using the image display. While viewing your images, you can magnify or delete images, or create a print order to print a set of photos. To preserve battery life, connect an AC power adapter (optional) while using the image display.

Viewing your images

1 Turn the camera on. 2 Press the dial. The last picture you took or viewed appears on the image display. 3 Turn the dial to scroll through your images.
Each time a new image appears on the display, the image quality indicator appears in the upper left corner of the image, represented by one, two, or three stars. The image quality indicator disappears after two seconds. The status line at the bottom of the image display shows the following information about the current image: The number of the picture and the number of images stored in memory or on the CF memory card If the image is selected for printing, the number of copies you want to print and the print order icon The date the picture was taken
SJUG.book Page 16 Tuesday, October 9, 2001 1:35 PM

image quality indicator

status line date the picture was taken
image number and number of images stored in memory
print order (DPOF) information and print order icon
When you have finished reviewing images, be sure to turn off the image display to conserve battery power. To do this, press the IMAGE DISPLAY ON/OFF ( ) button or turn the camera off.

Creating a print order

You can use your camera to select the images that you want to print. For example, when you gather with family and friends to view your photos, you can keep track of the photos they want copies of and then print the photos later. With a print order you can: select one image, several images, or all of the images that you have stored in the camera. select how many copies you want of each image or of all images. To add an image to a print order, you select the number of copies that you want to print. Note When you are reviewing images on the image display, a print order icon appears on the status line for images that you have added to the print order.

To change the flash setting
1 Turn the camera on. 2 Press the FLASH ( ) button repeatedly until the flash setting you want appears on the status LCD. The button cycles through the four available flash settings.
SJUG.book Page 23 Tuesday, October 9, 2001 1:35 PM

flash button

Changing the image quality
The camera has three image quality settings: Good, Better, and Best. The current image quality setting is indicated by one, two, or three stars on the status LCD. In addition, if the image display is on, GOOD, BETTER or BEST appears in the status line. The image quality setting determines the quality of your images and how many images can be stored in internal memory or on the CF memory card. Pictures taken with higher image quality take up more space in memory; pictures taken with lower image quality take up less space. Image quality
This is the most memory-efficient image quality setting. Use this setting for taking pictures that you will only send in e-mail or place on the Internet. This setting produces high-quality images and requires less memory than BEST mode. Use this setting for taking pictures that you plan to print 13 cm by 18 cm (5 by 7 inches) or smaller. This is the default setting. Produces the highest-quality images and uses the most memory. Use this setting for taking pictures that you plan to crop and enlarge using image editing software, or print 20 cm by 25 cm (8 by 10 inches) or larger.

Resolution

592 by 400 (with medium compression)

BETTER

1792 by 1200 (with medium compression)
1792 by 1200 (with low compression)
SJUG.book Page 24 Tuesday, October 9, 2001 1:35 PM
Here are some important notes about the image quality setting: You can use different image quality settings for different images. The camera retains the current image quality setting until you change it, even if you turn the camera off. Because image quality affects the number of images that can be stored in memory or on a memory card, the number of available images (shown on the status LCD) changes as you change the image quality.
To change the image quality
1 Turn the camera on. 2 Press the IMAGE QUALITY ( ) button repeatedly until the quality level you want appears on the status LCD.
image quality button image quality indicator

Using the digital zoom

You can use the cameras digital zoom to make a subject appear to be closer. With digital zoom, you always use the image display to preview your image and see the effect of the zoom. The image display shows the image you will capture, as shown in the example below.
SJUG.book Page 25 Tuesday, October 9, 2001 1:35 PM

To use the digital zoom

1 Turn the camera on. 2 Press the DIGITAL ZOOM ( ) button once to turn on the digital zoom. The image display comes on automatically and 2X DIGITAL ZOOM appears in the status line. Note Pressing the timer. button again activates the self-

Tips for unloading images to a Macintosh computer
When you unload images to your computer, the images are still stored in the camera until you delete them. If you take new pictures and then unload images again, the automatic unload software ignores the old images. That way, you do not end up with many copies of the same image on your computer. If you have no new images in your camera when you connect it to the computer, the automatic unload does not take place. You can set up specific tasks to occur automatically after the images have been unloaded from the camera such as deleting images from the camera, printing the images, or putting the images into a photo album layout. To do this, click Options in the HP Automatic Image Unload window.
SJUG.book Page 39 Tuesday, October 9, 2001 1:35 PM
In the HP Automatic Image Unload Options window, you can disable the automatic unload feature. To turn the feature on again, open the Automatic Image Unload Options file in the ArcSoft PhotoImpression folder. The automatic unload software stores your images in a folder called Macintosh HD:ArcSoft PI:Photos:date. You can change only the final folder (the date) in that path. Make sure you know where your images are stored on your computers hard disk. By default, images are stored in the PhotoImpression folder, for example Macintosh HD:ArcSoft PI:Photos:2002.07.04. If you ever decide to delete the ArcSoft PI folder, you must first move your images to another folder. If you do not, your images will be deleted from the hard disk when you delete the PhotoImpression folder.
Unloading images without using the software
If you are away from home, you can unload images to a computer that does not have the HP Automatic Image Unload software installed on it. Note Make sure that the computer has a USB port and that its operating system is Windows 2000 or Windows Millennium Edition or later, or Macintosh OS 8.6 or later.
To unload images to a Windows or Macintosh computer
1 Change the camera's PC Connect Mode to Disk Drive. For more information, see Changing the PC Connect Mode setting on page 35. 2 Connect the camera to the Windows or Macintosh computer with the USB cable. 3 Turn the camera on. The letters PC appear in the status LCD to indicate that the camera is connected to the computer. The computer recognizes the camera as a disk drive. 4 Use the following procedure to access your images as files:
SJUG.book Page 40 Tuesday, October 9, 2001 1:35 PM

To copy images from internal memory to a CF memory card
1 If you have not already already done so, install a CF memory card in the camera. 2 Turn the camera on. 3 Press the 4 Turn the press the dial twice to open the main menu. dial to scroll to the Setup icon, and then dial to open the Setup menu.
5 Turn the dial to scroll to Copy to CF Card, and then press the dial. Note Copying images from internal memory to a CF memory card does not overwrite content that is already on the CF memory card. If the CF memory card does not have enough room to store all the images that are in internal memory, an error message appears. Either make room on the CF memory card or turn the camera off and replace the CF memory card. dial to select Yes, and then press the dial.

6 Turn the

SJUG.book Page 47 Tuesday, October 9, 2001 1:35 PM
The images are copied from internal memory to the CF memory card. Your images are still stored in internal memory until you delete them. If you have created a print order for those images, the print order is copied to the CF memory card along with the images.

Formatting memory

The internal memory installed in your digital camera is formatted at the factory. Under ordinary circumstances, you do not need to format it. However, if the camera does not store images properly, you might want to try formatting the internal memory.
Formatting deletes everything stored in memory.
Most CF memory cards are already formatted when you buy them. However, if you buy a CF memory card that has not been formatted, you need to format it before you can store images on it. If you insert a new, formatted card in the camera and it doesnt work, try reformatting itit may have been formatted improperly. Also reformat cards that were previously used in a different camera to optimize them for use with your camera. Note You can reuse a CF memory card that is full by formatting it. This deletes all images and files from the card. You can also use the Delete menu to delete one or all images from a CF memory card.
To format internal memory or a CF memory card
1 Turn the camera on. 2 Press the 3 Turn the press the dial twice to open the main menu. dial to scroll to the Delete icon, and then dial to open the Delete menu.

4 Turn the dial to scroll to Format Memory or, if a CF memory card is installed, scroll to Format CF Card, and then press the dial. 5 Turn the dial to select Yes, and then press the dial.
SJUG.book Page 48 Tuesday, October 9, 2001 1:35 PM
When memory has been formatted, the message NO IMAGES IN MEMORY (or NO IMAGES ON CF CARD) appears on the image display.
Formatting deletes everything stored on the CF memory card, including files from other devices such as pocket computers. Make sure you are formatting the correct card! If youre not sure, check the contents of the card before you format it.
SJUG.book Page 49 Tuesday, October 9, 2001 1:35 PM
Powering and maintaining your camera
This chapter describes how to use batteries or an AC power adapter to power your camera, how to care for your camera, and how to use your camera safely.

Powering your camera

Your digital camera can be powered by batteries or an HPapproved AC power adapter. For convenience, use batteries when you are taking pictures. To preserve battery power, use an AC adapter (purchased separately) when you are reviewing images on the image display for an extended period of time, or when you are transferring images from the camera to your computer.
Determining if the batteries need to be changed
The battery icon on the status LCD indicates the charge level of the batteries. There are three levels of battery charge: full, partially-charged, and empty. If the battery icon shows that the batteries are empty, it is time to replace the batteries. Note When the empty-battery icon on the status LCD begins blinking, the power is about to shut off. You need to replace the batteries before you can take another picture.
SJUG.book Page 50 Tuesday, October 9, 2001 1:35 PM

Partially-charged

The life of the batteries depends on several factors. These include: how often and how long you use the image display. how often you use the flash. the number of pictures you take. temperature conditions (operating the camera at colder temperatures results in shorter battery life). the type of battery (photo-lithium batteries have the longest life, alkaline have the shortest). To extend battery life: When using the camera with a computer or when using the image display for extended periods of time, use an AC power adapter that HP has approved for use with your digital camera. Limit your use of the image display, except when using an AC power adapter. Use only batteries that are designed for digital cameras, such as photo-quality alkaline, photo-lithium, or rechargeable nickelmetal hydride (NiMH) batteries, available from various battery manufacturers. If you are using rechargeable batteries, be sure you fully drain and recharge the batteries according to the manufacturers instructions. Use only batteries that are in good condition. Batteries that show signs of leakage, corrosion, or swelling should not be installed in the camera.

Keep the lens clean to help you take sharp, clear photos with the best possible focus. Use a dry, soft, lint-free cloth to gently wipe the lens and status and image displays to clean off any fingerprints and dust. Wipe the outside surfaces of the camera with a clean, dry cloth. Never use a rough cloth or abrasive cleaners, which can scratch the camera. Do not leave the camera in the sun or in a very warm location (for example, inside a car) for long periods. If you move the camera from a cold to a warm location or vice versa, always allow the camera several minutes to adjust to the current ambient temperature before you use it.

Memory cards

To avoid erasing data from a memory card or damaging the card, do not expose it to heat, moisture, or static electricity.
SJUG.book Page 54 Tuesday, October 9, 2001 1:35 PM

Safety precautions

To avoid the risk of electric shock, do not open the camera case or attempt to repair the camera yourself. Contact an authorized HP Service Center for repairs. Keep the camera dry. Exposing the camera to excessive moisture can cause it to malfunction. If moisture gets inside the camera, stop using the camera immediately. Allow the camera to air dry completely before operating it again. Your digital camera comes with four non-rechargeable batteries. Do not attempt to recharge these batteries. Do not mix old and new batteries or batteries of different types. Follow the battery manufacturers safety instructions. When disposing of batteries, follow the battery manufacturers disposal and recycling instructions or the guidelines that are recommended for your area. Do not incinerate or puncture batteries.
Use only the HP-approved AC power adapter. Failure to do so could damage the camera or cause a fire. Use of a non-HP AC power adapter will also void your cameras warranty. The image display of your digital camera contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or EIA: www.eiae.org.

The camera cannot find a focus because the subject does not provide enough contrast for the automatic focus system. The exposure will be longer than 1/30 second because the light is dim and the flash has been turned off.
Try the following solutions: Use the flash. Wait for lighting conditions to improve or turn on the lights in the room. Use a tripod to steady the camera for the longer exposure. The cameras automatic focus range is 20 cm (~8 inches) from the front of the lens to infinity. For a clear, sharp image, make sure your subject is within this range. If you do not want your subject in the middle of the image, or if the subject lacks contrast, use focus lock to set the cameras automatic focus using a different subject. For more information, see Using focus lock on page 10.

My image is blurry.

Your subject was too close to the camera lens.
The subject wasnt centered in the frame, or the subject did not provide enough contrast for the camera to focus properly. The subject moved while you took the picture. You moved the camera while you took the picture.
If you are photographing a moving object, try using focus lock.
Hold the camera steady as you press the SHUTTER button, or use a tripod.
SJUG.book Page 59 Tuesday, October 9, 2001 1:35 PM

My image is too dark.

There was not enough light.
Wait for natural lighting conditions to improve, add indirect lighting, or use the flash to illuminate your subject. The flash can only illuminate objects that are within 2.5 m (~8 feet) of the camera. Make sure your subject is within range of the flash when you take the picture. Use FLASH ON to brighten the subject when there is a back light. Be sure to move your fingers away from the flash when you are ready to take a picture. Change the flash setting to AUTO or OFF. Try taking the picture from a different angle. Avoid pointing the camera directly toward a bright light or reflective surface on a sunny day. If there is light behind your subject, use the FLASH ON setting. Move back from the subject or set the flash to FLASH OFF and take the picture again. Turn the camera on.
The flash was on, but the subject was too far away.
A light shone behind the subject. Your finger blocked the flash.

My image is too bright.

The flash provided too much light. A natural or artificial source other than the flash provided too much light.
You were too close to the subject to use the flash. When I connect the camera to my computer, the software says it cant find the camera. The camera is turned off. The USB cable is not connected correctly. The camera is connected to the computer through a USB hub and your USB hub is not compatible with the camera. The camera needs to be reset.
Make sure that the USB cable is firmly connected at both ends.
Connect the camera directly to a USB port on the computer.
Turn the camera off and then on again.
SJUG.book Page 60 Tuesday, October 9, 2001 1:35 PM
The computer does not recognize the camera and the automatic image unload does not start.
The camera is not configured correctly for the type of computer you have.
Open the Setup menu and check the PC Connect Mode setting: If you are using a Windows computer, make sure PC Connect Mode is set to Digital Camera. If you are using a Macintosh computer, make sure PC Connect Mode is set to Disk Drive. When you unload images to your computer, the images are still stored in the camera until you delete them. If you take new pictures and then unload images again, the automatic unload software ignores the old images. If you have no new images in your camera when you connect it to the computer, the automatic unload does not take place. Go to the Support section of www.apple.com and download the USB Mass Storage Support (version 1.3.5) update.
You have not taken any new pictures since the last time you unloaded images to your computer.
Your Macintosh computer has an older version of OS 8.6, which does not support USB mass storage.

Error messages

If an error message appears on the image display, try one of the following solutions. Error message

BAD CF CARD!

The CF memory card is damaged. Power in the batteries is insufficient for you to preview your pictures. However, you can take pictures or review your images.
Reformat the CF memory card or replace the card. Press the button to turn the image display off and use the viewfinder to frame your pictures.
BATTERIES ARE TOO LOW FOR LIVE VIEW
SJUG.book Page 61 Tuesday, October 9, 2001 1:35 PM

Error message

CF CARD REQUIRES FORMATTING INVALID DATE!
The CF memory card needs to be formatted.
Format the CF memory card.

SJUG.book Page 63 Tuesday, October 9, 2001 1:35 PM
Contacting HP Customer Support
In addition to the Web, you can contact HP by telephone or mail for support and service for your camera. Prices, availability, and hours of support are subject to change without notice.

How HP can help

HP's support hotline can help resolve problems with setup, installation, configuration, and operation. For questions about operating systems or network configurations, contact your point of purchase or internal support department. For help with non-HP hardware or software, please contact the manufacturer.

Before you call

Please have the following information ready before you call: serial number (found on the bottom of your camera) product name date of purchase
Obtaining support within the United States
Free telephone support for one year
Within one year of your purchase, telephone support is provided to you free of charge. If this is a long distance call for you, long distance charges will apply. Call (208) 323-2551. Our support staff is available from 6 am to 10 pm Mountain Time, Monday through Friday, and 9 am to 4 pm on Saturday.

After the first year

Call (208) 323-2551. Charges are $25.00 per issue, charged to your credit card. If you think your HP product might need service, call the Customer Support Center, which can help determine if service is required.
SJUG.book Page 64 Tuesday, October 9, 2001 1:35 PM
Upgraded warranty options
You can select one of the following upgraded warranty options (available in the U.S. only): Standard Next Day Exchange Accidental Damage Protection with Next Day Exchange Upgrade your standard factory warranty to three years with the HP SupportPack. Service coverage begins on product purchase date and the pack must be purchased within the first 180 days of product purchase. HP will determine the hardware service offering based upon the outcome of system self-test programs run by the customer through the initial call to the HP Customer Care Center. If during your technical support call it is determined that your product needs replacement, then HP will ship you this replacement product next business day free of charge. Optional Accidental Damage Protection is also available. This warranty upgrade protects against accidental breakage such as spills, drops, or falls. Both of these warranty upgrades offer maximized uptime and productivity, the convenience of door-to-door pickup with delivery, packaging and freight prepaid by HP. For more information please visit www.hp.com/go/hpsupportpack or call 1-888999-4747.

Web sites AC power adapter 52 camera 29, 62 disposal or recycling information 54 downloading Macintosh software 60 HP assistance 62 HP photosmart 62 HP product support 62 HP SupportPack 64 purchasing card readers 40 sales and service 68 sales and service offices 64 third parties 62 worldwide support details 64 weight of camera 72 Welcome screen 27 Windows computer bonus software 31 connecting camera to 31 downloading images 32 installing software 31 operating system requirements 30, 35 port requirement 30 system requirements 30 unloading images 32, 39 using camera with 30 using camera with NT 4.wrist strap, attaching 3 Y yellow light next to viewfinder 12, 71 Z zooming 24

www.hp.com/photosmart

Printed in Singapore 6/01

*C890090029*

C8900-90029

hp photosmart 318 digital camera

data sheet

The HP Photosmart 318 digital camera provides great results and point-and-shoot ease with 2.31 megapixel resolution and a 2x digital zoom to get closer to your subject. Easily preview your photos with the 1.75-inch color liquid crystal display (LCD) with 3x and 6x magnification. With 8 MB internal flash memory, quick photo transfers and an easy USB connection to PC and Mac, youre ready to capture all the action.
point-and-shoot for great results
fully automatic with 2.31 megapixel resolution and 2x digital zoom preview photos on 1.75-inch color LCD with 3x and 6x magnification view battery level, remaining number of pictures and flash settings from energy-saving status display get great resultsphoto-friendly features like auto exposure, red-eye reduction and auto flash make it easy

store more

save photos to 8 MB internal flash memory easily add memory using the CompactFlash Type 1 memory card slot (CompactFlash memory card not included, purchase separately)

quick photo transfers

quickly download images to a PC or Mac easily create and print photo album pages with HP's enhanced proprietary Photo Imaging Software

support

one-year limited warranty backed by HP Customer Care 24-hour Web support at www.hp.com/go/support

compatibility

supports Microsoft Windows 98, 2000 Professional, Me, XP Home and Professional, and Mac OS 8.6 or higher supports Windows NT 4.0 with optional CompactFlash memory card reader (not included, purchase separately)

Technical Specifications

Imaging Technology HP Photo Imaging Software Resolution 2.31 MP (1800 x 1200) Sensor 1/2.6 in. CCD Color Depth 30-bit Memory 8 MB internal memory Number of pictures per 8 MB memory: Good - 113 Better - 16 Best - 7 CompactFlash Type I memory card slot for 4 to 128 MB (memory card not included, purchase separately) Lens Fixed focal length: all F-numbers: f2.8 and f8.0 Fixed focal length: 3 glass and 2 plastic with glass lens cover Zoom 2x digital zoom Exposure and Image Controls Automatic Shutter Speed Range 4 /1250 to 7/5000 sec. Picture Modes Automatic Shooting Modes Single shot Focus Auto focus Focus range: 20 cm to infinity (measured from outer lens surface) Focus latency: full focus range: 500 ms (without iris change) Other focus parameters Focus steps: 50 possible: 8 steps for rage 0.6 to infinity Focus areas: Center 1/5 horizontally and vertically (1/25 of total pixels) Focus exposure time: Maximum is 1/30 sec. to minimize motion blur Focus lock: Focus is locked by partially pressing and holding the shutter release (S1) Sensitivity ISO 100 Metering TTL White Balance Controls Automatic Color Control None Self timer 10 seconds Viewfinder Optical range viewfinder. No marking in the viewfinder Magnification: 0.34x Eye relief: 15.0 mm View Finder to Image Ratio: typically 85% (100% Maximum) Flash Built-in flash, range up to 3 meters; flash modes: auto, auto with red-eye, on, off Sound capture None Image LCD 1.75-in. color LCD with 3x and 6x magnification in play back for immediate close-up review 280 x 200 pixels Backlit color Thumb-nail or full-screen views Status LCD Energy saving status display shows: battery level, number of pictures left, flash settings, zoom, macro, CompactFlash memory card Buttons by Status LCD Image (or photo) quality (good/better/best), digital zoom/self-timer, flash Power Batteries: 4 AA (included) or 4 rechargeable (not included) - Alkaline, Photo Lithium, NiMh, or NiCd AC: optional AC adapter (not included) Supported Operating Systems Microsoft Windows 98, 2000 Professional, Me, NT 4.0 (requires 64 MB RAM and CompactFlash memory card reader (not included, purchase separately) and Mac OS 8.6 or above Minimum System Requirements USB port or parallel port with CompactFlash memory card reader, CD-ROM drive PC: 166 MHz Pentium processor or equivalent (300 MHz Pentium II processor or better required for Windows 2000) 32 MB RAM, 180 MB free hard disk space, SVGA monitor (640 x 480, 256-bit color), Microsoft Windows Me, 98, XP Home and Professional, 2000 Professional or NT 4.0 with CompactFlash memory card reader and CompactFlash memory card Macintosh: 233 MHz PowerPC processor, 64 MB RAM, 150 MB free hard drive disk space, Macintosh OS 8.6 or above, SVGA monitor (800 x 600, 16-bit color) Connectivity 1 USB port or CompactFlash Type I memory card slot (CompactFlash memory card gives an additional storage option but is not included, purchase separately) Operating Environment Operating temperature range: 41 to 104 F Relative humidity (RH): 15 to 80% RH non-condensing Storage temperature: -40 to 158 F Dimensions W x D x H/Weight 1.7 x 4.5 x 2.7 in./.37 lb Warranty One-year limited warranty backed by HP Customer Care

Ordering Information

C8900A HP Photosmart 318 digital camera, quick start poster, USB cable, 4 AA batteries, wrist strap, CD-ROM with HP Photo Imaging Software including HP Share-to-Web software for Microsoft Windows, ArcSoft PhotoImpression software with Automatic Image Unload for Macintosh, ArcSoft PhotoFantasy for Microsoft Windows and Macintosh C8901A HP Photosmart 318xi digital camera, quick start poster, USB cable, 4AA batteries, wrist strap, CD-ROM with HP Photo Imaging Software including HP Share-to-Web software for Microsoft Windows, ArcSoft PhotoImpression software with Automatic Image Unload for Macintosh, ArcSoft Panorama Maker 2000 for Microsoft Windows and Macintosh Accessories C7993A C7994A C7995A C7996A C7997A C8875A C8877A Y1788A Y1790A 8 MB HP CompactFlash memory card 16 MB HP CompactFlash memory card 32 MB HP CompactFlash memory card 64 MB HP CompactFlash memory card 128 MB HP CompactFlash memory card AC adapter Camera case HP Digital Camera Accessory Kit dsca20 (rechargeable batteries, battery recharger, camera case) HP Digital Camera Accessory Kit dsca30 (rechargeable batteries, battery recharger, camera case, 16 MB CompactFlash card, mini tripod)

For More Information

Hewlett-Packard peripherals and personal computers are available at authorized HP resellers worldwide. In North America, call for the authorized HP reseller nearest you: United States: 1-800-552-8500 Canada: 1-800-387-3867 If you have questions about the HP Photosmart 318 digital camera, go to Hewlett-Packards home page on the world wide web: www.hp.com or the HP Peripherals Forum on CompuServe. For free electronic customer support on the world wide web, go to: www.hp.com/go/support
Mac and Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, are U.S. registered trademarks of Microsoft Corporation. Pentium is a U.S. registered trademark of Intel Corporation. All other brand and product names are trademarks or registered trademarks of their respective companies. Technical information in this document is subject to change without notice.
Hewlett-Packard Company 2001 5980-6955ENUC 09/01