Reviews & Opinions
Independent and trusted. Read before buy HP Presario 700!

HP Presario 700

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
HP Presario 700 Laptop & Notebook, size: 911 KB
Related manuals
HP Presario 7000 Hardware Guide
HP Presario 700 Product Brochure
HP Presario 7000
HP Presario 7000 Install Guide
HP Presario 700 Software Guide

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

HP Presario 700DENAQ 196345-B21-700 New 8-Cell Battery for HP Presario 700 - 5200mAh
8-cell replacement battery for your HP Presario 700 laptop computer.

Details
Brand: DENAQ
Part Number: 196345-B21-700


Here you can find all about HP Presario 700, for example manual and review. You can also write a review.

 

[ Report abuse or wrong photo | Share your HP Presario 700 photo ]

Video review

Compaq Presario 700

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
Muz 7:38pm on Tuesday, August 3rd, 2010 
Compaq Presario 700 series main battery This replacement battery that I bought works great. I am glad I bought it.
rycaga 5:37pm on Tuesday, April 27th, 2010 
The Compaq Presario 700 series is one of their biggest selling "home" laptops, how do I know this I here you ask. Good size keyboard, most keys are in standard places (like desktop keyboard) Not suitable for traveling (not very durable).
schampagne 3:58am on Friday, April 9th, 2010 
Compaq Presario 700Z 1.2GHz Athlon Firts of all - never buy this computer - new or used!It gets so warm at the bottom, you can not hold it at all.
vijaysule 5:44pm on Friday, March 12th, 2010 
This laptop is fine for the average user, but for those that use processor intensive software, it is best to give it a miss. Cheap. I bought my notebook about 2 yrs ago. This computer suited my entry level needs Too many problems

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

HP G7000 Notebook PC and Compaq Presario C700 Notebook PC
Maintenance and Service Guide
Copyright 2007 Hewlett-Packard Development Company, L.P. Intel, Celeron, and Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Second Edition: December 2007 First Edition: July 2007 Document Part Number: 447381-002

Safety warning notice

WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950).

Table of contents

1 Product description 2 External component identification Top components..... 5 Display components... 5 Buttons and speakers.... 6 Keys.... 7 Lights.... 8 TouchPad..... 9 Front components.... 10 Right-side components... 10 Left-side components.... 11 Bottom components.... Illustrated parts catalog Serial number location... 13 Computer major components.... 14 Display assembly components.... 20 Plastics Kit..... 22 Mass storage devices.... 23 Miscellaneous parts.... 24 Sequential part number listing... Removal and replacement procedures Preliminary replacement requirements.... 32 Tools required.... 32 Service considerations... 32 Plastic parts... 32 Cables and connectors.... 33 Drive handling.... 33 Grounding guidelines.... 34 Electrostatic discharge damage... 34 Packaging and transporting guidelines.. 35
Workstation guidelines.. 35 Equipment guidelines... 36 Unknown user password... 37 Component replacement procedures... 38 Serial number.... 38 Computer feet.... 39 Battery.... 40 Hard drive.... 41 Memory module.... 43 WLAN module.... 45 Optical drive.... 48 Keyboard.... 50 Switch cover.... 53 Display assembly.... 55 Camera module.... 60 Top cover.... 62 Caps lock LED board.... 64 USB board.... 66 Fan.... 68 Speakers.... 70 System board.... 72 RTC battery... 75 Card reader board... 77 Heat sink.... 79 Processor.... 81 Power connector cable.... Setup Utility Starting the Setup Utility.... 84 Changing the language of the Setup Utility... 84 Navigating and selecting in the Setup Utility... 85 Displaying system information... 85 Restoring default settings in the Setup Utility... 85 Using advanced Setup Utility features.... 86 Closing the Setup Utility.... 86 Setup Utility menus..... Specifications Computer specifications.... 88 15.4-inch, WSXGA, BrightView display specifications... 89 Hard drive specifications.... 90 DVDRW and CD-RW Super Multi Double-Layer Combo Drive specifications.. 91 System DMA specifications.... 92
System memory map specifications... 92 System interrupt specifications.... 93 System I/O address specifications.... Screw listing Phillips PM2.05.0 captive screw.... 97 Phillips PM3.03.0 screw... 98 Black Phillips PM2.03.0 screw.... 99 Black Phillips PM2.04.0 screw... 100 Phillips PM2.59.0 screw.... 102 Phillips PM2.54.0 screw.... Phillips PM2.57.0 screw.... Silver Phillips PM2.04.0 screw.... Phillips PM2.56.0 captive screw... 8 Backup and recovery Recovering system information.... Backing up your information... When to back up... Backup suggestions... Using system restore points... When to create restore points... Create a system restore point.. Restore to a previous date and time... Creating recovery discs.... Performing a recovery... Recovering from the recovery discs... Recovering from the partition on the hard drive.. 9 Connector pin assignments Audio-out (headphone).... Audio-in (microphone).... External monitor.... RJ-11 (modem).... RJ-45 (network).... 109

Compaq Presario C700 Notebook PC

Diskette drive Camera

Support for external USB drive only Low-light, VGA camera Fixed (no tilt) by 20 frames per second

Microphone Audio

One omnidirectional monoaural microphone Azalia high-definition (HD) audio HP-branded Altec Lansing speakers Presario-branded Altec Lansing speakers

Modem Ethernet

56K V.92 data/fax modem Integrated 10/100 network interface card (NIC) Ethernet cable not included

Wireless

Integrated wireless local area network (WLAN) options by way of wireless module: Intel PRO Wireless 3945 802.11a/b/g and 802.11b/g Broadcom 802.11a/b/g Atheros AR2425 WLAN b/g Support for 2.4- and 5.0-GHz antenna integrated into the display assembly

External media card

Digital Media Slot, supports SD, MMC, MS, MSP, SD I/O, xD Type H, and xD Type M Support for miniature versions of SD, MMC, MS Duo with adapter (adapter is not included)
Audio-in (mono microphone) Audio-out (stereo headphone) RJ-11 (modem) RJ-45 (Ethernet, includes link and activity lights)
S-Video-out (include component video support) USB (3)
VGA (Dsub, 15-pin) supporting external resolution @ 75Hz, hot plug/unplug, and autodetect for correct output to wideaspect vs. standard-aspect video 2-pin, 65-W AC power Docking No docking
Compaq Presario C700 Notebook PC
Keyboard/pointing devices
12.0-inch keyboard TouchPad 2 rubber dome TouchPad buttons with scissor structure 4-way scroll Taps enabled as default

Power requirements

6-cell 2.20-Ah Li-ion battery 65-W AC adapter with localized cable plug support (2-wire plug with ground pin, supports 2-pin DC connector)
Security Operating system
Security cable slot Preinstalled: Free DOS Windows Vista Home Basic (32-bit) Windows Vista Premium (32-bit)

Serviceability

End-user replaceable parts: AC adapter Battery (system) Hard drive Memory module Optical drive WLAN module
External component identification

Function Displays system information when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with a function key or the esc key. Displays the Windows Start menu. Displays a shortcut menu for items beneath the pointer. Can be used like the keys on an external numeric keypad. Execute frequently used system functions when pressed in combination with the fn key.

Lights

Item (1)
Component Power lights (2)*
Description On: The computer is on. Blinking: The computer is in the Sleep state. Off: The computer is off or in Hibernation. On: A battery is charging. Blinking: A battery that is the only available power source has reached a low battery level or a critical battery level. Off: If the computer is plugged into an external power source, the light is turned off when all batteries in the computer are fully charged. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low battery level.

Battery light

(3) (4)
Drive light Wireless lights (2)
Blinking: The hard drive or optical drive is being accessed. Blue: An integrated wireless device, such as a WLAN device, is turned on. Amber: An integrated wireless device is turned off.

(5) (6)

Caps lock light Num lock light
On: Caps lock is on. On: Num lock is on or the embedded numeric keypad is enabled.
*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The power light on the front of the computer is visible whether the computer is open or closed. The 2 wireless lights display the same information. The light on the wireless button is visible only when the computer is open. The wireless light on the front of the computer is visible whether the computer is open or closed.

TouchPad

Component TouchPad light
Function Blue: TouchPad is enabled. Amber: TouchPad is disabled.

(2) (3) (4) (5) (6) (7)

TouchPad* TouchPad horizontal scroll zone* Left TouchPad button* Right TouchPad button* TouchPad vertical scroll zone* TouchPad on/off button
Moves the pointer and selects or activates items on the screen. Scrolls left or right. Functions like the left button on an external mouse. Functions like the right button on an external mouse. Scrolls up or down. Enables/disables the TouchPad.
*This table describes factory settings. To view or change pointing device preferences, select Start > Control Panel > Hardware and Sound > Mouse.

Front components

Component Audio-out (headphone) jack
Function Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio. Connects an optional computer headset microphone, stereo array microphone, or monaural microphone.

Audio-in (microphone)

For use in computer models equipped with a Web camera: Equipped with Intel Core 2 Duo and Core Duo processors and a card reader board Equipped with Intel Core 2 Duo and Core Duo processors, but not a card reader board Equipped with Intel Celeron M processors and a card reader board Equipped with Intel Celeron M processors, but not a card reader board 462439-001 462441-001 462440-001 462442-001 454950-001 454941-001 454949-001
Modem cable (not illustrated) (11) (12) (13) USB board (includes cable) Card reader board (for use only with system boards with spare part numbers 453494-001, 453495-001, 462439-001, and 462440-001) Processors (include replacement thermal material) Intel Core 2 Duo T8300 (2.40-GHz, 3 MB of L2 cache, 800-MHz FSB) Intel Core 2 Duo T8100 (2.10-GHz, 3 MB of L2 cache, 800-MHz FSB) Intel Core 2 Duo T7250 (2.00-GHz, 2 MB of L2 cache, 800-MHz FSB) Intel Core 2 Duo T7100 (1.80-GHz, 2 MB of L2 cache, 800-MHz FSB) Intel Core Duo T5750 (2.00-GHz, 2 MB of L2 cache, 667-MHz FSB) Intel Core Duo T5450 (1.67-GHz, 2 MB of L2 cache, 667-MHz FSB) Intel Core Duo T2370 (1.73-GHz, 1 MB of L2 cache, 667-MHz FSB) Intel Core Duo T2330 (1.60-GHz, 1 MB of L2 cache, 667-MHz FSB)
459798-001 459797-001 454320-001 448149-001 462353-001 451597-001 462354-001 455944-001
Description Intel Core Duo T2310 (1.46-GHz, 1 MB of L2 cache, 667-MHz FSB) Intel Celeron M 550 (2.00-GHz, 1 MB of L2 cache, 533-MHz FSB) Intel Celeron M 540 (1.86-GHz, 1 MB of L2 cache, 533-MHz FSB) Intel Celeron M 530 (1.73-GHz, 1 MB of L2 cache, 533-MHz FSB)
Spare part number 455943-001 454322-001 454321-001 455437-001 454943-001 454947-001 454931-001

(14) (15) (16) (17)

Heat sink (includes thermal material) RTC battery 6-cell, 2.20-Ah, 47-Wh Li-ion battery Base enclosures (includes 6 base rubber feet) For use only with computer models equipped with a card reader board For use only with computer models not equipped with a card reader board Rubber Foot Kit (includes 6 base enclosure rubber feet)
454939-001 454938-001 454952-001
WLAN modules Broadcom 802.11a/b/g WLAN modules: For use in Antigua and Barbuda, Argentina, Australia, the Bahamas, Barbados, Brunei, Canada, Chile, the Dominican Republic, Guam, Guatemala, Hong Kong, India, Indonesia, Malaysia, Mexico, New Zealand, Panama, Paraguay, Saudi Arabia, Taiwan, the United States, and Vietnam For use in Aruba, Austria, Azerbaijan, Bahrain, Belgium, Bermuda, Brazil, Bulgaria, the Cayman Islands, Colombia, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, El Salvador, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Jordan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Montenegro, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Romania, Russia, Serbia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, the United Kingdom, and Uzbekistan For use in Ecuador, Haiti, Honduras, Pakistan, the People's Republic of China, Peru, Qatar, South Korea, Uruguay, and Venezuela 441075-001

Item (21)

Description Optical drives (include bezel and bracket) DVDRW and CD-RW Super Multi, Double-Layer Combo Drive with LightScribe DVDRW and CD-RW Super Multi, Double-Layer Combo Drive DVD/CD-RW Combo Drive Optical Drive Kit (not illustrated, includes bezel, bracket, and screws)
454929-001 454928-001 454927-001 454930-001
Display assembly components
Description Display bezels For use only with HP G7000 computer models: Without a camera With a camera

454909-001 462445-001

For use only with Compaq Presario C700 computer models (2) (3) (4) (5) (6) (7) (8) Without a camera With a camera 454910-001 462446-001 462448-001 454915-001 454323-001 454916-001 454919-001 454919-001
Camera module Display inverter (includes Mylar shield) 15.4-inch, WSXGA + BrightView display panel (includes display panel cable) Display Hinge Kit (includes left and right display hinges) Wireless Antenna Kit (includes 2 wireless antenna transceivers and cables) Display Cable Kit (includes microphone) Display enclosures (include 2 wireless antenna transceivers and cables) For use only with HP G7000 computer models:
Description Without a camera With a camera
Spare part number 454911-001 462443-001
For use only with Compaq Presario C700 computer models: (9) Without a camera With a camera 454913-001 462444-001 462447-001 454917-001 454918-001 462457-001
Camera module cable Display Rubber Kit (not illustrated; includes rubber screw covers) Display Screw Kit (not illustrated)

LCD logo kit

*Not illustrated

Plastics Kit

Description Plastics Kit
Spare part number 454937-001

(1) (2)

Memory/wireless module compartment cover (includes 2 captive screws, secured by C-clips) Hard drive bay cover (includes 2 captive screws, secured by C-clips)

Mass storage devices

Description Hard drives (include bracket) 160-GB, 5400-rpm 120-GB, 5400-rpm 80-GB, 5400-rpm Hard Drive Kit (not illustrated, includes hard drive bracket and screws)
454925-001 454924-001 454923-001 454926-001
Optical drives (include bezel and bracket) DVDRW and CD-RW Super Multi, Double-Layer Combo Drive with LightScribe DVDRW and CD-RW Super Multi, Double-Layer Combo Drive DVD/CD-RW Combo Drive Optical Drive Kit (not illustrated, includes bezel, bracket, and screws) 454929-001 454928-001 454927-001 454930-001

Spare part number 441075-001
Description Broadcom 802.11a/b/g WLAN module for use in Antigua and Barbuda, Argentina, Australia, the Bahamas, Barbados, Brunei, Canada, Chile, the Dominican Republic, Guam, Guatemala, Hong Kong, India, Indonesia, Malaysia, Mexico, New Zealand, Panama, Paraguay, Saudi Arabia, Taiwan, the United States, and Vietnam Broadcom 802.11a/b/g WLAN module for use in Aruba, Austria, Azerbaijan, Bahrain, Belgium, Bermuda, Brazil, Bulgaria, the Cayman Islands, Colombia, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, El Salvador, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Jordan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Montenegro, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Romania, Russia, Serbia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, the United Kingdom, and Uzbekistan Broadcom 802.11a/b/g WLAN module for use in Japan Broadcom 802.11b/g WLAN module for use in Antigua and Barbuda, Argentina, Australia, the Bahamas, Barbados, Brunei, Canada, Chile, the Dominican Republic, Guam, Guatemala, Hong Kong, India, Indonesia, Malaysia, Mexico, New Zealand, Panama, Paraguay, Saudi Arabia, Taiwan, the United States, and Vietnam Broadcom 802.11b/g WLAN module for use in Aruba, Austria, Azerbaijan, Bahrain, Belgium, Bermuda, Brazil, Bulgaria, the Cayman Islands, Colombia, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, El Salvador, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Jordan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Montenegro, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Romania, Russia, Serbia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, the United Kingdom, and Uzbekistan Broadcom 802.11b/g WLAN module for use in Japan Intel Core 2 Duo T7100 1.80-GHz processor (2 MB of L2 cache, 800-MHz FSB) Intel Core Duo T5450 1.67-GHz processor (2 MB of L2 cache, 667-MHz FSB) Intel 802.11a/b/g WLAN module for use in Antigua and Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United States, Venezuela, and Vietnam Intel 802.11a/b/g WLAN module for use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Montenegro, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania, Russia, Serbia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan Intel 802.11a/b/g WLAN module for use in Australia, New Zealand, Pakistan, the People's Republic of China, and South Korea Intel 802.11a/b/g WLAN module for use in Thailand Intel 802.11a/b/g WLAN module for use in Japan System board for use only with computer models without a Web camera equipped with Intel Core 2 Duo and Core Duo processors and a card reader board System board for use only with computer models without a Web camera equipped with Intel Core 2 Duo and Core Duo processors, but not a card reader board Intel Core 2 Duo T7250 2.00-GHz processor (2 MB of L2 cache, 800-MHz FSB) Intel Celeron M 540 1.86-GHz processor (1 MB of L2 cache, 533-MHz FSB) Intel Celeron M 550 2.00-GHz processor (1 MB of L2 cache, 533-MHz FSB) 15.4-inch, WSXGA + BrightView display panel (includes display panel cable)

Serial number

Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is located on the bottom of the computer.

Computer feet

Description Rubber Foot Kit (includes 6 base enclosure rubber feet) Spare part number 454952-001
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations illustrated below.

Battery

Description 6-cell, 2.20-Ah, 47-Wh Li-ion battery Spare part number 454931-001
Before disassembling the computer, follow these steps 1. 2. 3. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
Remove the battery: 1. 2. 3. Turn the computer upside down on a flat surface. Slide the battery release latch (1) to release the battery. Pivot the battery (2) upward and remove it from the computer (3).
To insert the battery, insert the rear edge of the battery into the battery bay and pivot the front edge downward until the battery is seated. The battery release latch automatically locks the battery into place.

Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket.
Spare part number 454925-001 454924-001 454923-001 Description 160-GB, 5400-rpm 120-GB, 5400-rpm 80-GB, 5400-rpm
Before removing the hard drive, follow these steps: 1. 2. 3. 4. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 40).

Remove the hard drive: 1. 2. 3. Position the computer with the front toward you. Loosen the two Phillips PM2.05.0 captive screws (1) that secure the hard drive bay cover to the computer. Lift the left side of the hard drive bay cover (2), swing it up and to the right, and remove the cover. The hard drive bay cover is included in the Plastics Kit, spare part number 454937-001.
Use the Mylar tab (1) to slide the hard drive (2) to the left until it disconnects from the system board.
Remove the hard drive (3) from the hard drive bay.

6. 7. 8.

Remove the hard drive from the hard drive bay. If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.03.0 screws (1) that secure the hard drive bracket to the hard drive. Lift the bracket (2) straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.

Memory module

Description 1024-MB (667-MHz, PC2-5300, DDR2) 512-MB (667-MHz, PC2-5300, DDR2) 256-MB (667-MHz, PC2-5300, DDR2) Spare part number 454922-001 454920-001 454921-001
Before removing the memory module, follow these steps: 1. 2. 3. 4. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 40).
Remove the memory module: 1. 2. Loosen the two Phillips PM2.05.0 captive screws (1) that secure the memory/wireless module compartment cover to the computer. Lift the rear edge of the cover (2), swing it up and forward, and remove the cover. The memory/ wireless module compartment cover is included in the Plastics Kit, spare part number 454937-001.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.)
Remove the module (2) by pulling it away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the memory module slot.
Reverse this procedure to install a memory module.

WLAN module

Description Broadcom 802.11a/b/g WLAN modules: For use in Antigua and Barbuda, Argentina, Australia, the Bahamas, Barbados, Brunei, Canada, Chile, the Dominican Republic, Guam, Guatemala, Hong Kong, India, Indonesia, Malaysia, Mexico, New Zealand, Panama, Paraguay, Saudi Arabia, Taiwan, the United States, and Vietnam For use in Aruba, Austria, Azerbaijan, Bahrain, Belgium, Bermuda, Brazil, Bulgaria, the Cayman Islands, Colombia, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, El Salvador, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Jordan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Montenegro, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Romania, Russia, Serbia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, the United Kingdom, and Uzbekistan For use in Japan 441075-001 Spare part number

Intel 802.11a/b/g WLAN modules: For use in Antigua and Barbuda, Argentina, Australia, the Bahamas, Barbados, Brunei, Canada, Chile, the Dominican Republic, Guam, Guatemala, Hong Kong, India, Indonesia, Malaysia, Mexico, New Zealand, Panama, Paraguay, Saudi Arabia, Taiwan, the United States, and Vietnam For use in Aruba, Austria, Azerbaijan, Bahrain, Belgium, Bermuda, Brazil, Bulgaria, the Cayman Islands, Colombia, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, El Salvador, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Jordan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Montenegro, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Romania, Russia, Serbia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, the United Kingdom, and Uzbekistan For use in Ecuador, Haiti, Honduras, Pakistan, the People's Republic of China, Peru, Qatar, South Korea, Uruguay, and Venezuela For use in Japan 451861-001
Broadcom 802.11b/g WLAN modules: For use in Antigua and Barbuda, Argentina, Australia, the Bahamas, Barbados, Brunei, Canada, Chile, the Dominican Republic, Guam, Guatemala, Hong Kong, India, Indonesia, Malaysia, Mexico, New Zealand, Panama, Paraguay, Saudi Arabia, Taiwan, the United States, and Vietnam For use in Aruba, Austria, Azerbaijan, Bahrain, Belgium, Bermuda, Brazil, Bulgaria, the Cayman Islands, Colombia, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, El Salvador, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Jordan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Montenegro, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Romania, Russia, Serbia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, the United Kingdom, and Uzbekistan For use in Japan 441090-001
802.11b/g WLAN module for use in Thailand Atheros AR2425 802.11b/g WLAN module: For use in Albania, Algeria, Andorra, Angola, Antigua & Barbuda, Afghanistan, Syria, Nether Antilles, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia & Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Central
Description African Republic, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Zaire, Denmark, Djibouti, Dominica, Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, South Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Martinique, Guadeloupe, Bermuda, French Guiana, Aruba, British Virgin Islands, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua, New Guinea, Paraguay, People's Republic of China, Peru, Philippines, Poland, Portugal, Qatar, Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe

CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support. Before removing the WLAN module, follow these steps: 1. 2. 3. 4. 5. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 40). Remove the hard drive bay cover (see Hard drive on page 41).
Remove the WLAN module: 1. 2. Position the computer with the front toward you. Disconnect the two WLAN antenna cables (1) from the WLAN module. NOTE: The black WLAN antenna cable is connected to the WLAN module Main terminal. The white WLAN antenna cable is connected to the WLAN module Aux terminal. 3. Remove the two Phillips PM2.04.0 screws (2) that secure the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.)
Remove the WLAN module (3) by pulling it away from the slot at an angle. NOTE: WLAN modules are designed with a notch (4) to prevent incorrect installation into the WLAN module slot.
Reverse this procedure to install a WLAN module.

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.
Description DVDRW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe DVDRW and CD-RW Super Multi Double-Layer Combo Drive DVD/CD-RW Combo Drive Spare part number 454929-001 454928-001 454927-001
Before removing the optical drive, follow these steps: 1. 2. 3. 4. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 40).
Remove the optical drive: 1. 2. 3. 4. Position the computer with right side toward you. Remove the Phillips PM2.59.0 screw (1) that secures the optical drive to the computer. Insert a thin tool, such as a paper clip (2), into the release access. (The optical drive media tray is partially ejected from the optical drive.) Use the media tray frame to remove the optical drive (3).

Description RTC battery (includes double-sided tape) Spare part number 454947-001
Before removing the RTC battery, follow these steps: 1. 2. 3. 4. 5. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 40). Remove the following components: a. b. c. d. e. f. g. Hard drive (see Hard drive on page 41) Optical drive (see Optical drive on page 48) Keyboard (see Keyboard on page 50) Switch cover (see Switch cover on page 53) Display assembly (see Display assembly on page 55) Top cover (see Top cover on page 62) System board (see System board on page 72)
Remove the RTC battery: 1. 2. Turn the system board upside down, with the audio connectors toward you. Disconnect the RTC battery cable (1) from the system board.
Remove the RTC battery (2). NOTE: The RTC battery is attached to the system board with double-sided tape.
Reverse this procedure to install the RTC battery.

Card reader board

Description Card reader board Spare part number 454949-001
Before removing the card reader board, follow these steps: 1. 2. 3. 4. 5. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 40). Remove the following components: a. b. c. d. e. f. g. Hard drive (see Hard drive on page 41) Optical drive (see Optical drive on page 48) Keyboard (see Keyboard on page 50) Switch cover (see Switch cover on page 53) Display assembly (see Display assembly on page 55) Top cover (see Top cover on page 62) System board (see System board on page 72)
Remove the card reader board: 1. 2. Turn the system board upside down, with the audio connectors toward you. Remove the three Phillips PM2.04.0 screws (1) that secure the card reader board to the system board.
Lift the card reader board (2) straight up to disconnect it from the system board.
Remove the card reader board.
Reverse the above procedure to install the card reader board.

Heat sink

Description Heat sink (includes thermal material) Spare part number 454943-001

*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none. NOTE: PC Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial port may assert IRQ3 or IRQ4.
System I/O address specifications
I/O address (hex) 000 - 00F 010 - 01F 020 - - - 03F 02E - 02F 040 - 05F 044 - 05F 062 - 065 - 06F 070 - - 07F 080 - 08F 090 - 093 - 09F 0A0 - 0A1 I/O Address (hex) 0A2 - 0BF 0C0 - 0DF 0E0 - 0EF 0F0 - 0F1 0F2 - 0FF 100 - 16F 170 - - 1EF 1F0 - 1F7 1F8 - 202 - 21F System function (shipping configuration) DMA controller no. 1 Unused Interrupt controller no. 1 Opti chipset configuration registers Unused 87334 Super I/O configuration for CPU Counter/timer registers Unused Keyboard controller Port B Unused Keyboard controller Unused NMI enable/RTC Unused DMA page registers Unused Port A Unused Interrupt controller no. 2 System function (shipping configuration) Unused DMA controller no. 2 Unused Coprocessor busy clear/reset Unused Unused Secondary fixed disk controller Unused Primary fixed disk controller Unused JoyStick (decoded in ESS1688) Unused
I/O address (hex) 220 - 22F 230 - 26D 26E - - 27F 280 - 2AB 2A0 - 2A7 2A8 - 2E7 2E8 - 2EF 2F0 - 2F7 2F8 - 2FF 300 - 31F 320 - 36F 370 - - 37F 380 - - 38B 38C - 3AF 3B0 - 3BB 3BC - 3BF 3C0 - 3DF 3E0 - 3E1 3E2 - 3E3 3E8 - 3EF 3F0 - 3F7 3F8 - 3FF CF8 - CFB CFC - CFF
System function (shipping configuration) Entertainment audio Unused Unused Unused Unused Unused Unused Reserved serial port Unused Infrared port Unused Unused Secondary diskette drive controller Parallel port (LPT1/default) Unused FM synthesizerOPL3 Unused VGA Reserved (parallel port/no EPP support) VGA PC Card controller in CPU Unused Internal modem A diskette controller Serial port (COM1/default) PCI configuration index register (PCIDIVO-1) PCI configuration data register (PCIDIVO-1)

Screw listing

This section provides specification and reference information for the screws and screw locks used in the computer. All screws and screw locks listed in this section are available in the Screw Kit, spare part number 454951-001, and the Display Screw Kit, spare part number 454918-001.

Chapter 7 Screw listing

Phillips PM2.05.0 captive screw

Color Black

120 Chapter 10 Power cord set requirements

11 Recycling

When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal.

Display

WARNING! The backlight contains mercury. Caution must be exercised when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. CAUTION: The procedures in this appendix can result in damage to display components. The only components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight. Careful handling must be exercised when removing these components. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that might require special handling at end-of-life. Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org. This section provides disassembly instructions for the display assembly. The display assembly must be disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this appendix are general disassembly instructions. Specific details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one computer model to another.

Battery 121

Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly.
Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display assembly. Remove the display bezel (3).

122 Chapter 11 Recycling

Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).

doc1

HP G6000 Notebook PC and Compaq Presario F700 Notebook PC
Maintenance and Service Guide
Copyright 2007 Hewlett-Packard Development Company, L.P. AMD, the AMD Arrow logo, and combinations thereof, are trademarks of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: December 2007 Document Part Number: 460721-001

Safety warning notice

WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950).

Table of contents

1 Product description 2 External component identification Top components..... 5 Display components... 5 Buttons, lights, and speakers.... 6 Keys.... 8 Pointing devices.... 9 Front components.... 10 Right-side components... 11 Left-side components.... 12 Rear component.... 13 Bottom components.... Illustrated parts catalog Serial number location... 15 Computer major components.... 16 Display assembly components.... 21 Plastics Kit..... 23 Mass storage devices.... 24 Miscellaneous parts.... 25 Sequential part number listing... Removal and replacement procedures Preliminary replacement requirements.... 30 Tools required.... 30 Service considerations... 30 Plastic parts... 30 Cables and connectors.... 31 Drive handling.... 31 Grounding guidelines.... 32 Electrostatic discharge damage... 32 Packaging and transporting guidelines.. 33
Workstation guidelines.. 33 Equipment guidelines... 34 Unknown user password... 35 Component replacement procedures... 36 Serial number.... 36 Computer feet.... 36 Battery.... 37 Camera module.... 38 Hard drive.... 40 Memory module.... 42 RTC battery... 44 WLAN module.... 45 Optical drive.... 48 Switch cover.... 50 Keyboard.... 52 Power button board.... 54 Display assembly.... 56 Top cover.... 63 System board.... 65 Audio board.... 68 USB/power connector board... 69 Fan/heat sink assembly... 71 Processor.... Setup Utility Starting the Setup Utility.... 75 Changing the language of the Setup Utility... 75 Navigating and selecting in the Setup Utility... 76 Displaying system information... 76 Restoring default settings in the Setup Utility... 76 Using advanced Setup Utility features.... 77 Closing the Setup Utility.... 77 Setup Utility menus..... Specifications Computer specifications.... 79 15.4-inch, WXGA display specifications... 80 Hard drive specifications.... 81 DVDRW and CD-RW SuperMulti Double-Layer Combo Drive specifications.. 82 DVD/CD-RW Combo Drive specifications... 83 System DMA specifications.... 84 System interrupt specifications.... 85 System I/O address specifications.... 86
System memory map specifications... Screw listing Phillips PM3.04.0 screw... 89 Phillips Phillips Phillips Phillips Phillips Phillips PM2.56.0 captive screw.... 90 PM2.04.0 screw... 92 PM2.58.0 screw... 94 PM2.510.0 screw.... 97 PM2.55.0 screw... 98 PM2.54.0 screw.... 101
Hex HM5.09.0 standoff.... Backup and recovery Recovering system information.... Creating recovery discs.... Backing up your information... When to back up... Backup suggestions... Using system restore points... When to create restore points... Create a system restore point.. Restore to a previous date and time... Performing a recovery... Recovering from the recovery discs... Recovering from the partition on the hard drive.. 9 Connector pin assignments Audio-out (headphone).... 107 Audio-in (microphone).... 107 External monitor.... RJ-11 (modem).... RJ-45 (network).... S-Video-out.... Universal Serial Bus.... 10 Power cord set requirements Requirements for all countries and regions... 113 Requirements for specific countries and regions... Recycling Battery..... 115 Display.... 106 106

Description Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe Atheros AR2425 802.11b/g WLAN module: For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the United States

459339-001

459339-002 For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

461863-001 461864-001 461865-001
461866-001 461867-001 461868-001 461869-001 461870-001 461871-001 461872-001 461873-001 461875-001 461944-001 461945-001 461946-001 461947-001 461948-001
Spare part number 461949-001 461950-001 461951-001 461953-001 461954-001 461955-001 462427-001 462428-001 462853-001 462854-001 465229-001
Description 1024-MB memory module (PC2-5300, 667-MHz, DDR2) 80-GB, 5400-rpm hard drive (includes hard drive bracket and connector) 120-GB, 5400-rpm hard drive (includes hard drive bracket and connector) DVD/CD-RW Combo Drive DVDRW and CD-RW SuperMulti Double-Layer Combo Drive DVDRW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe 15.4-inch, WXGA+BrightView display panel (includes display panel and backlight cables) Display Logo Kit for use with HP G7000 computer models 6-cell, 47-Wh, 2.2-Ah battery Screw Kit Audio board without infrared transceiver (includes audio board cable)
Removal and replacement procedures
Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures: Flat-bladed screwdriver Magnetic screwdriver Phillips P0 and P1 screwdrivers

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures. NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying screws) away from the work area to prevent damage.

Plastic parts

Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
Chapter 4 Removal and replacement procedures

Cables and connectors

CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily.

Drive handling

CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Before handling a drive, be sure that you are discharged of static electricity. While handling a drive, avoid touching the connector. Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and be sure that the optical drive tray is closed. Handle drives on surfaces covered with at least one inch of shock-proof foam. Avoid dropping drives from any height onto any surface. After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag. Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers. Avoid exposing a drive to temperature extremes or liquids. If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective packaging and label the package FRAGILE.

Remove the battery: 1. 2. 3. Turn the computer upside down on a flat surface, with the battery bay toward you. Slide the battery release latch (1) to release the battery. Pivot the battery (2) upward and remove it from the computer (3).
To install the battery, insert the rear edge of the battery into the battery bay and pivot the battery downward until it is seated. The battery release latch automatically locks the battery into place.

Camera module

Description Camera module Spare part number 461875-001
Before removing the camera module, follow these steps: 1. 2. 3. 4. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 37).
Remove the camera module: 1. 2. 3. Turn the computer right-side up, with the front toward you. Open the computer as far as possible. Remove the four rubber screw covers (1) and the four Phillips PM2.58.0 screws (2) that secure the display bezel to the display assembly.
Flex the inside edges of the display bezel left and right sides (1) until the bezel disengages from the display enclosure. Flex the inside edge of the display bezel top edge (2) until the bezel disengages from the display enclosure.
Separate the display bezel top edge (3) from the display assembly to access the camera module.
Release the camera module (1) as far from the display enclosure as the camera module cable allows. Disconnect the camera module cable (2) from the camera module.
Remove the camera module.
Reverse this procedure to install the camera module.

Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket.
Description 160-GB, 5400-rpm hard drive 120-GB, 5400-rpm hard drive 80-GB, 5400-rpm hard drive Spare part number 451862-001 461951-001 461950-001
Before removing the hard drive, follow these steps: 1. 2. 3. 4. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 37).

Remove the hard drive: 1. 2. 3. Position the computer with the front toward you. Loosen the two Phillips PM2.56.0 captive screws (1) that secure the hard drive cover to the computer. Lift the right side of the hard drive cover (2), swing it up and to the left, and remove the cover. The hard drive cover is included in the Plastics Kit, spare part number 442891-001.
Grasp the Mylar tab (1) on the hard drive and lift the right side of the hard drive (2) to disconnect it from the system board.
Remove the hard drive (3) from the hard drive bay.
If it is necessary to replace the hard drive bracket, remove the two Phillips PM3.04.0 hard drive bracket screws (1) from each side of the hard drive. Lift the bracket (2) straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.

Memory module

Description 1024-MB (PC2-5300, 667-MHz, DDR2) 512-MB (PC2-5300, 667-MHz, DDR2) Spare part number 461949-001 461948-001
Before removing the memory module, follow these steps: 1. 2. 3. 4. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 37).
Remove the memory module: 1. 2. 3. Position the computer with the front toward you. Loosen the three Phillips PM2.56.0 captive screws (1) that secure the memory/WLAN module compartment cover to the computer. Lift the left side of the cover (2), swing it up and to the right, and remove the cover. The memory/ WLAN module compartment cover is included in the Plastics Kit, spare part number 442891-001.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.)
Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the memory module slot.
Reverse this procedure to install a memory module.

Remove the top cover: 1. 2. Turn the computer upside down, with the front toward you. Remove the nine Phillips PM2.58.0 screws that secure the top cover to the base enclosure.
Remove the following: (1) Three Phillips PM2.54.0 screws in the optical drive bay (2) Six Phillips PM2.55.0 screws in the battery bay (3) Two Hex HM5.09.0 standoffs in the memory/WLAN module compartment

4. 5. 6.

Turn the computer right-side up, with the front toward you. Disconnect the TouchPad cable (1) from the system board. Remove the two Phillips PM2.58.0 screws (2) and the two Phillips PM2.55.0 screws (3) that secure the top cover to the computer.
Lift the rear edge of the top cover (1) and swing it (2) up and forward until it rests at an angle.

Remove the top cover

Reverse this procedure to install the top cover.

System board

NOTE: All system board spare part kits include replacement thermal material.
Spare part number 461861-001 461860-001 Description System board with ExpressCard assembly System board without ExpressCard assembly
Before removing the system board, follow these steps: 1. 2. 3. 4. 5. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 37). Remove the following components: a. b. c. d. e. f. Hard drive (see Hard drive on page 40) Optical drive (see Optical drive on page 48) Switch cover (see Switch cover on page 50) Keyboard (see Keyboard on page 52) Display assembly (see Display assembly on page 56) Top cover (see Top cover on page 63)
When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: Memory modules (see Memory module on page 42) RTC battery (see RTC battery on page 44) WLAN module (see WLAN module on page 45) Fan/heat sink assembly (see Fan/heat sink assembly on page 71) Processor (see Processor on page 73)
Remove the system board: 1. 2. 3. Remove the two Phillips PM2.55.0 screws (1) that secure the system board to the base enclosure. Flex the front edge of the base enclosure (2) forward until the audio connectors clear the openings in the base enclosure. Use the optical drive connector (3) to lift the right side of the system board (4) until it rests at an angle.

Specifications

Computer specifications
Metric Dimensions Length Width Height (front to rear) Weight Equipped with 8-cell battery and optical drive Input power Operating voltage Operating current Temperature Operating (not writing to optical disc) Operating (writing to optical disc) Nonoperating Relative humidity Operating Nonoperating Maximum altitude (unpressurized) Operating (14.7 to 10.1 psia) Nonoperating (14.7 to 4.4 psia) Shock Operating Nonoperating Random vibration Operating 0.75 g zero-to-peak, 10 Hz to 500 Hz, 0.25 oct/min sweep rate 125 g, 2 ms, half-sine 200 g, 2 ms, half-sine -15 m to 3,048 m -15 m to 12,192 m -50 ft to 10,000 ft -50 ft to 40,000 ft 10% to 90% 5% to 95% 0C to 35C 5C to 35C -20C to 60C 32F to 95F 41F to 95F -4F to 140F 19.0 V dc @ 4.74 A 65 W 4.74 A 2.99 kg 6.59 lbs 35.73 cm 25.72 cm 3.28 to 3.94 cm 14.07 in 10.13 in 1.29 to 1.55 in U.S.

Metric Nonoperating

1.50 g zero-to-peak, 10 Hz to 500 Hz, 0.5 oct/min sweep rate
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this range of temperatures.
15.4-inch, WXGA display specifications
Metric Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle 0.259 0.259 mm RGB vertical stripe Edge lit 4W +/-65 horizontal, +/-50 vertical (typical) 20.7 cm 33.1 cm 39.1 cm Up to 16.8 million 200:1 (typical) 150 nits (typical) 8.15 in 13.03 in 15.39 in U.S.

Chapter 6 Specifications

Hard drive specifications
200-GB* Dimensions Height Width Weight Interface type Transfer rate Security 9.5 mm 70 mm 101 g SATA 100 MB/sec ATA security 9.5 mm 70 mm 101 g SATA 100 MB/sec ATA security 9.5 mm 70 mm 101 g SATA 100 MB/sec ATA security 9.5 mm 70 mm 101 g SATA 100 MB/sec ATA security 160-GB* 120-GB* 80-GB*
Seek times (typical read, including setting) Single track Average Maximum Logical blocks Disc rotational speed Operating temperature 3 ms 13 ms 24 ms 390,700,rpm 3 ms 13 ms 24 ms 312,560,rpm 3 ms 13 ms 24 ms 234,420,rpm 3 ms 13 ms 24 ms 156,280,rpm

Creating recovery discs

After setting up the computer for the first time, be sure to create a set of recovery discs of the full factory image. The recovery discs are used to start up (boot) the computer and recover the operating system and software to factory settings in case of system instability or failure. NOTE: Handle these discs carefully and keep them in a safe place. The software allows the creation of only one set of recovery discs. Note the following guidelines before creating recovery discs: Use any of the following types of discs: CD-R, DVD+R, DVD+R DL, DVD-R, or DVD-R DL (purchased separately). The discs you use will depend on the type of optical drive installed in your computer. Because DVDs store more information than CDs, DVDs and DVDs with double-layer (DL) support reduce the number of discs required. NOTE: Read-write discs, such as CD-RW, DVD+RW, and DVD-RW, are not compatible with the Recovery Manager software. The computer must be connected to AC power during this process. Only one set of recovery discs can be created per computer.
Recovering system information 103
Number each disc before inserting it into the computer optical drive. If necessary, you can exit the program before you have finished creating the recovery discs. The next time you open Recovery Manager, you will be prompted to continue the disc creation process.
To create a set of recovery discs: 1. Select Start > All Programs > Recovery Manager > Recovery Manager. Recover Manager opens. 2. Click Advanced Options. NOTE: If you are operating the computer on battery power, you will be prompted to connect to AC power before you can go to the next step. 3. 4. Click Recovery disc creation, and then click Next. Follow the on-screen instructions.
Backing up your information

When to back up

On a regularly scheduled basis NOTE: Set reminders to back up your information periodically. Before the computer is repaired or restored Before you add or modify hardware or software

Backup suggestions

Create a set of recovery discs using Recovery Manager. Create system restore points using the Windows System Restore feature, and periodically copy them to disc. Store personal files in the Documents folder and back up these folders periodically. Back up templates stored in their associated programs. Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings. The screen shot can be a time saver if you have to reset your preferences. To copy the screen and paste it into a word-processing document, follow these steps: a. b. Display the screen. Copy the screen: To copy only the active window, press alt+fn+prt sc. To copy the entire screen, press fn+prt sc. c. Open a word-processing document, and then select Edit > Paste.

104 Chapter 8 Backup and recovery
Using system restore points
When you back up your system, you are creating a system restore point. A system restore point allows you to save and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes made to your system. NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since the last restore point. You also can create additional restore points to provide increased protection for your system files and settings.
When to create restore points
Before you add or extensively modify software or hardware Periodically, whenever the system is performing optimally NOTE: If you revert to a restore point and then change your mind, you can reverse the restoration.
Create a system restore point
1. 2. 3. 4. 5. Select Start > Control Panel > System and Maintenance > System. In the left pane, click System protection. Click the System Protection tab. Under Automatic restore points, select the disk for which you want to create a restore point. Click Create. The System Protection window opens. 6. Follow the on-screen instructions.
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was functioning optimally, follow these steps: 1. 2. 3. 4. Select Start > Control Panel > System and Maintenance > System. In the left pane, click System protection. Click the System Protection tab. Click the System Restore button, and then click Next. The System Restore window opens. 5. Follow the on-screen instructions.
Recovering system information 105

Performing a recovery

NOTE: You can only recover files that you have previously backed up. HP recommends that you use Recovery Manager to create an entire drive backup as soon as you set up your computer. Recovery Manager software allows you to repair or restore the system if you experience system failure or instability. Recovery Manager works from recovery discs that you create or from a dedicated recovery partition on the hard drive. NOTE: Windows has its own built-in repair features, such as System Restore and driver rollback capabilities. If you have not already tried these features, try them before using Recovery Manager. NOTE: Recovery Manager recovers only software that was preinstalled at the factory. Software not provided with this computer must be downloaded from the manufacturer's Web site or reinstalled from the disc provided by the manufacturer.
Recovering from the recovery discs
To restore the system from the recovery discs: 1. 2. 3. Back up all personal files. Insert the first recovery disc into the optical drive and restart the computer. Follow the on-screen instructions.

Display

WARNING! The backlight contains mercury. Caution must be exercised when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. CAUTION: The procedures in this appendix can result in damage to display components. The only components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight. Careful handling must be exercised when removing these components. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that might require special handling at end-of-life. Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org. This section provides disassembly instructions for the display assembly. The display assembly must be disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this appendix are general disassembly instructions. Specific details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one computer model to another.

Battery 115

Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly.
Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display assembly. Remove the display bezel (3).

116 Chapter 11 Recycling

Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).
Remove all screws (1) that secure the display panel assembly to the display enclosure. Remove the display panel assembly (2) from the display enclosure.
Turn the display panel assembly upside down. Remove all screws that secure the display panel frame to the display panel.
Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display panel frame.

Display 117

10. Remove the display panel frame (2) from the display panel.
11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward.

Index 121

display panel illustrated 22 product description 1 removal 59 spare part number 22, 29, 60 Display Screw Kit, spare part number 22, 28 display specifications 80 display switch 5 docking support, product description 3 drive light 7, 10 drives boot order 78 preventing damage 31 DVD/CD-RW Combo Drive precautions 31 removal 48 spare part number 18, 24, 29, 48 specifications 83 DVDRW and CD-RW Combo Drive precautions 31 removal 48 spare part numbers 18, 24, 29, 48 specifications 82 E electrostatic discharge 32 esc key 8 Ethernet, product description 3 ExpressCard slot bezel, illustrated 23 external media cards, product description 3 external monitor port location 12 pin assignments 108 F fan/heat sink assembly removal 71 spare part number 18, 27, 71 feet locations 36 spare part number 36 fingerprint reader 75
fn key 8 front components 10 function keys 8 G graphics, product description grounding equipment and methods 34 1
keypad keys 8 keys esc 8 fn 8 function 8 keypad 8 Windows applications 8 Windows logo 8 L language support 75, 78 left-side components 12 light components 6 lights battery 7, 10 caps lock 7 drive 7, 10 power 6, 10 wireless 7, 10 M main menu 78 mass storage devices, spare part numbers 24 memory map specifications 88 memory module product description 2 removal 42 spare part numbers 20, 28, 42 memory test 77 memory/WLAN module compartment 14 memory/WLAN module compartment cover illustrated 23 removal 42 microphone illustrated 22 locations 5 product description 2 removal 61 spare part number 61 microphone jack location 10 pin assignments 107 model name 1 modem jack location 12 pin assignments 109
H hard drive location 14 precautions 31 product description 2 removal 40 spare part numbers 18, 24, 27, 29, 40 specifications 81 hard drive bay 14 hard drive bracket, removal 41 hard drive cover illustrated 23 removal 40 hard drive self test 77 headphone jack location 10 pin assignments 107 horizontal scroll zone 9 I I/O address specifications 86 interrupt specifications 85 J jacks audio-in 10 audio-out 10 headphone 10 microphone 10 modem 12 network 12 RJ-RJ-S-Video-out jack 12 K keyboard product description 3 removal 52 spare part numbers 17, 27, 52

122 Index

modem module, product description 3 monitor port location 12 pin assignments 108 N navigating in the Setup Utility network jack location 12 pin assignments 110 76
O operating system, product description 4 optical drive location 11 precautions 31 product description 2 removal 48 spare part numbers 18, 24, 48 specifications 82, 83 P packing guidelines 33 password clearing 35 passwords 78 pin assignments audio-in jack 107 audio-out jack 107 external monitor port 108 headphone jack 107 microphone jack 107 modem jack 109 monitor port 108 network jack 110 RJ-RJ-45 jack 110 S-Video-out 111 Universal Serial Bus (USB) port 112 plastic parts 30 Plastics Kit contents 23 spare part number 17, 23, 27 pointing device components horizontal scroll zone 9 illustrated 9 product description 3

TouchPad 9 TouchPad buttons 9 TouchPad light 9 TouchPad on/off button 9 vertical scroll zone 9 ports external monitor 12 monitor 12 product description 3 Universal Serial Bus (USB) 11, 12 power button 6 power button board removal 54 spare part number 17, 27, 54 power connector 11 power cord set requirements 113 spare part numbers 25 power light 6, 10 power requirements, product description 3 power-on password 78 processor product description 1 removal 73 spare part numbers 18, 27, 28, 73 processor C4 state 78 product description audio 2 chipset 1 diskette drive 2 display panel 1 docking support 3 Ethernet 3 external media cards 3 graphics 1 hard drives 2 keyboard 3 memory module 2 microphone 2 modem module 3 operating system 4 optical drives 2 pointing devices 3 ports 3 power requirements 3 processors 1
product name 1 security 3 serviceability 4 web camera 2 wireless 3 product name 1 R rear component 13 recovery discs 103 recovery, system 106 removal/replacement preliminaries 30 procedures 36 restore points 105 right-side components 11 RJ-11 jack location 12 pin assignments 109 RJ-45 jack location 12 pin assignments 110 RTC battery removal 44 spare part number 18, 27, 44 Rubber Kit, spare part number 18, 26 S S-Video-out jack location 12 pin assignments 111 Screw Kit contents 89 spare part number 25, 29 screw listing 89 secondary hard drive self test 77 security cable slot 11 Security menu 78 security, product description 3 selecting in the Setup Utility 76 serial number 15, 36 service considerations 30 serviceability, product description 4 Setup Utility changing the language 75 Diagnostics menu 77

Index 123

displaying system information 76 Main menu 78 navigating 76 overview 75 Security menu 78 selecting 76 starting 75 System Configuration menu 78 using advanced features 77 speakers 6 specifications computer 79 display 80 DVD/CD-RW Combo Drive 83 DVDRW and CD-RW Combo Drive 82 hard drive 81 I/O addresses 86 interrupts 85 memory map 88 optical drive 82, 83 system DMA 84 static-shielding materials 34 switch cover removal 50 spare part number 17, 27, 50 system board removal 65 spare part numbers 17, 28, 65 System Configuration menu 78 system DMA 84 system information 76, 78 system memory map 88 T tools required 30 top components 5 top cover removal 63 spare part number 17, 28, 63 TouchPad 9 TouchPad buttons 9 TouchPad light 9 TouchPad on/off button 9 transporting guidelines 33
U Universal Serial Bus (USB) port location 11, 12 pin assignments 112 unknown password 35 USB/power connector board removal 69 spare part number 18, 27, 69 V vents 13, 14 vertical scroll zone 9 virtualization technology
W web camera, product description 2 Windows applications key 8 Windows logo key 8 wireless antenna disconnecting 46 locations 5 removal 60 spare part number 22, 27, 61 Wireless Antenna Kit, spare part number 22, 27 wireless light 7, 10 wireless switch 7, 10 wireless, product description 3 WLAN module removal 45 spare part numbers 18, 26, 45 workstation guidelines 33

 

Tags

Rino 530 50 PA B-bone DSC-T77 G RZ-29FB51RX Calculator 32PC5RVH Aspire 5720 DMC-LZ6 70 Navi Colour Drive MD Nike Ipod MR620 Aopen AX3L RMR683HGA Nokia 6235 SL-P720 EX-Z60 TXL42G20ES XL 340 BR-HD50 WM-EQ3 Server A7SVM Ultra Zoom B2330 RX-V550 Samsung D528 28PT4406 LE46A557 TI-89 Asko 1400 VY-H200 HT-DS420 LS-H096qna0 Avxd 129 Acer V200 MFC-9160 42PF9630A-37B Xserve G5 Mf550 BPV755 N81-3 WA11RA Watch C330 FAX 3155 21PT136B DJM-909 Intuos 2 Lumina 1996 DV382 DAV-DZ370 Glacier XL-FZ158 Sony MZ-1 2 00 Dreams Ideapad Y450 IC-T2E DP3030 Audioline 33 AT-43 WP-720NP Powerseeker 50 CDP-CE345 Del REY T40 II Ensemble I Sunbeam 4785 MAC 250 FFT-76 Bassman 60 Z800EXR FA-101 Acoustics Z6 Yzea 502 RDR-VX500 Cyber530 SDM-S204E Legend C Phoenix MP33 R3 OP 74630 JBL 6230 32PFL7762D-12 Pocket PC KC-C150 LP-7900 MM-ZB9 VGP-prfs1 Center 2 Silverado-2005 Nuvi 1490 VPH6990 VP-D361W Cube R700 ML-1640 XAA Review GR-33 QW1450HT

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101