Acronyms and Abbreviations Index
Illustrated Parts Catalog
In This Section Mechanical Components....7 System Components....9

Mechanical Components

Item 1

Description Access panel

Spare Part Number 361400-001

Item 2

Description Plastics kit a) Optical drive ejector assembly b) PCI card guide * c) Diskette blank * d) Optical device blank *
Spare Part Number 361396-001 30545-001
Hardware kit a) Screws, 6-32X0.25, T10 (4) * b) Screw, 6-32X.187, T15 (4) * c) Screw, M3X0.5X4, T10 (4) * d) Expansion slot covers (2) * e) Power supply blanking panel * Rack Mounting Hardware

361397-001

Rack mounting hardware kit * Cable management arm * *Not shown

360104-001 360105-001

System Components
Description System Components

Spare Part Number

Power supply fan assembly Processor fan assembly Hot-plug power supply, 460 W PCI riser bracket, with PCI riser boards
361399-001 361390-001 361392-001 361387-001

Item 5

Description Processor/heatsink assembly a) Intel 3.00-GHz Xeon 1-MB L2 cache b) Intel 3.40-GHz Xeon 1-MB L2 cache * c) Intel 3.60-GHz Xeon 1-MB L2 cache *
371751-001 361381-001 361382-001 307132-001 349989-001 351518-001
a) 3.6 volt, 500 mAh NiMh battery * b) Universal battery housing with cable
Smart Array 6i 128MB DDR 40 bit memory module Boards
System board, with processor cages and system battery a) SCSI models b) SATA models * 361384-001 361385-001 361393-001 305443-001 361389-001 361395-001
Power converter module SCSI backplane SATA backplane with data and power cables *
Optical device/diskette drive interface Media Devices
Diskette drive, slimline, 1.44 MB Optical drives a) CD-ROM drive, removable slimline, IDE, 24X b) DVD-ROM drive, removable slimline, 8X * Memory

361402-001

228508-001 268795-001
DIMM, registered DDR SDRAM a) 512 MB b) 1 GB * c) 2 GB * Hard drives 366865-001 367167-001 367553-001

Item 15

Description SCSI Ultra320 universal hot-plug hard drive a) 36.4-GB 15K rpm b) 72.8-GB 10K rpm * c) 72.8-GB 15K rpm * d) 146.8-GB 10K rpm *
289241-001 289042-001 289243-001 289044-001
SATA hot-plug hard drive a) 80-GB 7.2K rpm * b) 160-GB 7.2K rpm * c) 250-GB 7.2K rpm * Cables 353042-001 353043-001 353044-001
Diskette drive/optical drive cable * Miscellaneous

361391-001

AC power cord * Battery, 3.3 V, lithium * Country kit * Return kit, pack box, and cushions * *Not shown
187335-001 234556-001 361401-001 371695-001
In This Section Required Tools.....13 Safety Considerations....14 Preparation Procedures.....15 Hard Drive Blank....19 Hard Drive....21 Diskette Drive Blank....22 Diskette Drive....23 Optical Device Blank....24 Optical Device....25 Optical Device Ejector....26 Hot-Plug AC Power Supply....27 Power Supply Fan Assembly....28 Processor Fan Assembly....29 Optical Device and Diskette Drive Interface...30 SCSI Backplane....31 SATA Backplane....32 PCI Riser Board Assembly....33 PCI-X or PCI Express Expansion Board...34 PCI Riser Board....35 Power Converter Module....36 Battery-Backed Write Cache Enabler...38 Memory Options.....40 Processor.....42 Battery.....45 System Board.....46 Re-Entering the Server Serial Number and Product ID...47

2. Extend the server from the rack, if applicable ("Extending the Server from the Rack" on page 17). 3. Lift up on the hood latch handle and remove the access panel.
Accessing the Product Rear Panel
NOTE: To access some components, you may need to remove the cable management arm.

To open the arm:

To close the arm:

Hard Drive Blank

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank.
1. Remove one of the following: Remove the SCSI hard drive blank.
Remove the SATA hard drive blank.
To replace the blank, slide the blank into the bay until it locks into place.

Hard Drive

CAUTION: Always power down the server if the boot partition resides on the drive you are replacing or if you are replacing the only drive in the server.
1. Determine the status of the hard drive from the hot-plug hard drive LEDs ("Hot-Plug SCSI Hard Drive LED Combinations" on page 74, "Hot-Plug SCSI Hard Drive LEDs" on page 73). 2. Back up all server data on the hard drive. 3. Remove one of the following: Remove the SCSI hard drive.
Remove the SATA hard drive.
IMPORTANT: When SATA hard drives are installed, SATA LED functionality and SATA hot-plug capability are not supported currently.
To replace the drive, slide the drive into the bay until the latch mechanism engages the server chassis, then close the latch handle to lock the drive in the server chassis.

Diskette Drive Blank

1. Power down the server ("Powering Down the Server" on page 16). 2. Extend the server from the rack ("Extending the Server from the Rack" on page 17). 3. Remove one of the following from the left hard drive bay: Hard drive blank (on page 19) Hard drive (on page 21)
4. Use a Torx T-10 screwdriver to remove the locking screw.
5. Remove the diskette drive blank.
To replace the component, reverse the removal procedure.

Diskette Drive

1. Power down the server ("Powering Down the Server" on page 16). 2. Extend the server from the rack. ("Extending the Server from the Rack" on page 17) 3. Remove one of the following from the left hard drive bay: Hard drive blank (on page 19) Hard drive (on page 21)
5. Remove the diskette drive.

Optical Device Blank

IMPORTANT: The ejector button is recessed to prevent accidental ejection; it may be helpful to use a pen or similar shaped object to access the button.
1. Press the ejector button.
2. Remove the optical device blank.

Optical Device

1. Power down the server ("Powering Down the Server" on page 16).
2. Press the ejector button.
3. Remove the optical device.

PCI Riser Board

1. Remove the PCI Riser Board Assembly ("PCI Riser Board Assembly" on page 33). 2. Remove any expansion board installed in the assembly ("PCI-X or PCI Express Expansion Board" on page 34). 3. Remove the applicable PCI riser boards from the assembly:
IMPORTANT: When removing the two parts of the riser board, pay attention to the orientation of the slots on each side. This information is important for subsequent procedures.
a. Remove the riser board with the slot for full-length expansion boards.
b. Repeat the previous step for the riser board with the slot for half-length expansion boards, if needed. To replace the component, reverse the removal procedure.

Power Converter Module

1. Power down the server ("Powering Down the Server" on page 16). 2. Remove all hot-plug power supplies ("Hot-Plug AC Power Supply" on page 27). 3. Extend or remove the server from the rack ("Extending the Server from the Rack" on page 17). 4. Remove the access panel ("Removing the Access Panel" on page 18).
5. Disconnect all internal power cables.
6. Remove the fan module ("Processor Fan Assembly" on page 29). 7. Slide the power converter module toward the back of the server, then lift the power converter module from the server.
NOTE: Cables are removed for clarity.
Battery-Backed Write Cache Enabler
The Battery-Backed Write Cache Enabler, also called the battery pack, works with the cache module to provide transportable data protection, increase overall controller performance, and maintain any cached data for up to 72 hours. The NiMH batteries in the battery pack are continuously recharged through a tricklecharging process whenever the system power is on. Under normal operating conditions, the battery pack lasts for 3 years before replacement is necessary.
CAUTION: To prevent damage to the equipment or server malfunction, do not add or remove the battery module while an array capacity expansion, RAID level migration, or stripe size migration is in progress. IMPORTANT: The battery module may have a low charge when installed. In this case, a POST error message is displayed when the server is powered up, indicating that the battery module is temporarily disabled. No action is necessary on your part. The internal circuitry automatically recharges the batteries and enables the battery module. This process may take up to 4 hours. During this time, the array controller will function properly, but without the performance advantage of the battery module. NOTE: The data protection and the time limit also apply if a power outage occurs. When power is restored to the system, an initialization process writes the preserved data to the hard drives.

CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power cords before removing or installing the PCI riser cage.

5. Remove the battery.

IMPORTANT: Replacing the system board battery resets the system ROM to its default configuration. After replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure. For more information about battery replacement or proper disposal, contact an authorized reseller or an authorized service provider.

System Board

1. Power down the server ("Powering Down the Server" on page 16). 2. Extend or remove the server from the rack ("Extending the Server from the Rack" on page 17). 3. Remove the access panel ("Removing the Access Panel" on page 18). 4. Remove the PCI Riser Board Assembly ("PCI Riser Board Assembly" on page 33).
5. Remove the processor fan module ("Processor Fan Assembly" on page 29).
6. Remove the BBWCE ("Battery-Backed Write Cache Enabler" on page 38). 7. Remove any DIMMs ("DIMM" on page 40). 8. Remove the processors ("Processor" on page 42). 9. Disconnect all cables connected to the system board. For additional information, refer to "Server Cabling" ("Server Cabling" on page 49). 10. Remove the system board.
IMPORTANT: If replacing the system board or clearing NVRAM, you must re-enter the server serial number through RBSU.
Re-Entering the Server Serial Number and Product ID
After you replace the system board, you must re-enter the server serial number and the product ID. 1. During the server startup sequence, press the F9 key to access RBSU. 2. Select the Advanced Options menu. 3. Select Serial Number. The following warning is displayed:
Warning: The serial number should ONLY be modified by qualified service personnel. This value should always match the serial number located on the chassis.
4. Press the Enter key to clear the warning. 5. Enter the serial number. 6. Select Product ID. The following warning is displayed.
Warning: The Product ID should ONLY be modified by qualified service personnel. This value should always match the Product ID located on the chassis.
7. Enter the product ID and press the Enter key. 8. Press the Escape key to close the menu. 9. Press the Escape key to exit RBSU. 10. Press the F10 key to confirm exiting RBSU. The server will automatically reboot.

In This Section Cabling Overview....49 Server Cable Routing....50 SATA Cable Routing....51

Cabling Overview

This section provides guidelines that help you make informed decisions about cabling the server and hardware options to optimize performance. For information on cabling peripheral components, refer to the white paper on high-density deployment at the HP website (http://www.hp.com/products/servers/platforms).

Server Cable Routing

CAUTION: When routing cables, always be sure that the cables are not in a position where they can be pinched or crimped.

SATA Cable Routing

In This Section SmartStart Software.....53 SmartStart Scripting Toolkit....54 HP Instant Support Enterprise Edition....55 Option ROM Configuration for Arrays...55 HP ROM-Based Setup Utility....56 ROMPaq Utility....56 System Online ROM Flash Component Utility...56 Integrated Management Log....57 Integrated Lights-Out Technology....58 Automatic Server Recovery....58 HP Systems Insight Manager...59 HP Insight Diagnostics.....59 USB Support....59 Internal USB Functionality....60

SmartStart Software

SmartStart is a collection of software that optimizes single-server setup, providing a simple and consistent way to deploy server configuration. SmartStart has been tested on many ProLiant server products, resulting in proven, reliable configurations. SmartStart assists the deployment process by performing a wide range of configuration activities, including: Configuring hardware using embedded configuration utilities, such as RBSU and ORCA Preparing the system for installing "off-the-shelf" versions of leading operating system software Installing optimized server drivers, management agents, and utilities automatically with every assisted installation
Testing server hardware using the Insight Diagnostics Utility ("HP Insight Diagnostics" on page 59) Installing software drivers directly from the CD. With systems that have internet connection, the SmartStart Autorun Menu provides access to a complete list of ProLiant system software. Enabling access to the Array Configuration Utility, Array Diagnostics Utility, and Erase Utility
SmartStart is included in the HP ProLiant Essentials Foundation Pack. For more information about SmartStart software, refer to the HP ProLiant Essentials Foundation Pack or the HP website (http://www.hp.com/servers/smartstart).
SmartStart Scripting Toolkit
The SmartStart Scripting Toolkit is a server deployment product that delivers an unattended automated installation for high-volume server deployments. The SmartStart Scripting Toolkit is designed to support ProLiant BL, ML, and DL servers. The toolkit includes a modular set of utilities and important documentation that describes how to apply these new tools to build an automated server deployment process. Using SmartStart technology, the Scripting Toolkit provides a flexible way to create standard server configuration scripts. These scripts are used to automate many of the manual steps in the server configuration process. This automated server configuration process cuts time from each server deployed, making it possible to scale server deployments to high volumes in rapid fashion. For more information, and to download the SmartStart Scripting Toolkit, refer to the HP website (http://www.hp.com/servers/sstoolkit).

HP Instant Support Enterprise Edition
ISEE is a proactive remote monitoring and diagnostic tool to help manage your systems and devices, a feature of HP support. ISEE provides continuous hardware event monitoring and automated notification to identify and prevent potential critical problems. Through remote diagnostic scripts and vital system configuration information collected about your systems, ISEE enables fast restoration of your systems. Install ISEE on your systems to help mitigate risk and prevent potential critical problems. For more information on ISEE, refer to the HP website (http://www.hp.com/hps/hardware/hw_enterprise.html). To download HP ISEE, visit the HP website (http://www.hp.com/hps/hardware/hw_downloads.html). For installation information, refer to the HP ISEE Client Installation and Upgrade Guide (ftp://ftp.hp.com/pub/services/hardware/info/isee_client.pdf).
Option ROM Configuration for Arrays
Before installing an operating system, you can use the ORCA utility to create the first logical drive, assign RAID levels, and establish online spare configurations. The utility provides support for the following functions: Configuring one or more logical drives using physical drives on one or more SCSI buses Viewing the current logical drive configuration Deleting a logical drive configuration
If you do not use the utility, ORCA will default to the standard configuration. For more information regarding array controller configuration, refer to the controller user guide. For more information regarding the default configurations that ORCA uses, refer to the HP ROM-Based Setup Utility User Guide on the Documentation CD.
HP ROM-Based Setup Utility
RBSU, an embedded configuration utility, performs a wide range of configuration activities that may include: Configuring system devices and installed options Displaying system information Selecting the primary boot controller Configuring memory options Language selection
For more information on RBSU, refer to the HP ROM-Based Setup Utility User Guide on the Documentation CD or the HP website (http://www.hp.com/servers/smartstart).

ROMPaq Utility

Flash ROM enables you to upgrade the firmware (BIOS) with system or option ROMPaq utilities. To upgrade the BIOS, insert a ROMPaq diskette into the diskette drive and boot the system. The ROMPaq utility checks the system and provides a choice (if more than one exists) of available ROM revisions. This procedure is the same for both system and option ROMPaq utilities. For more information about the ROMPaq utility, refer to the HP website (http://www.hp.com/servers/manage).
System Online ROM Flash Component Utility
The Online ROM Flash Component Utility enables system administrators to efficiently upgrade system or controller ROM images across a wide range of servers and array controllers. This tool has the following features: Works offline and online

Automatic Server Recovery
ASR is a feature that causes the system to restart when a catastrophic operating system error occurs, such as a blue screen, ABEND, or panic. A system fail-safe timer, the ASR timer, starts when the System Management driver, also known as the Health Driver, is loaded. When the operating system is functioning properly, the system periodically resets the timer. However, when the operating system fails, the timer expires and restarts the server. ASR increases server availability by restarting the server within a specified time after a system hang or shutdown. At the same time, the HP SIM console notifies you by sending a message to a designated pager number that ASR has restarted the system. You can disable ASR from the HP SIM console or through RBSU.
HP Systems Insight Manager
HP SIM is a web-based application that allows system administrators to accomplish normal administrative tasks from any remote location, using a web browser. HP SIM provides device management capabilities that consolidate and integrate management data from HP and third-party devices.
IMPORTANT: You must install and use HP SIM to benefit from the PreFailure Warranty for processors, hard drives, and memory modules.
For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or the HP SIM website (http://www.hp.com/go/hpsim).

HP Insight Diagnostics

The HP Insight Diagnostics utility displays information about the server hardware and tests the system to be sure it is operating properly. The utility has online help and can be accessed using the SmartStart CD. Online Diagnostics for Microsoft Windows is available for download from the HP website (http://www.hp.com/support).

USB Support

HP provides both standard USB support and legacy USB support. Standard support is provided by the operating system through the appropriate USB device drivers. HP provides support for USB devices before the operating system loading through legacy USB support, which is enabled by default in the system ROM. HP hardware supports USB version 1.1 or 2.0, depending on the version of the hardware. Legacy USB support provides USB functionality in environments where USB support is normally not available. Specifically, HP provides legacy USB functionality for: POST RBSU
Diagnostics DOS Operating environments which do not provide native USB support
For more information on ProLiant USB support, refer to the HP website (http://h18004.www1.hp.com/products/servers/platforms/usb-support.html).
Internal USB Functionality
An internal USB connector is available for use with USB drive keys only. The internal connector shares the same bus with the front external USB connector, and connecting a device to both the front internal and front external USB connectors is not supported. This solution provides for use of a permanent boot drive from a USB drive key installed in the front internal connector, avoiding issues of clearance on the front of the rack and physical access to secure data. For additional security, you can disable the front USB connectors through RBSU. Disabling external USB ports in RBSU disables both the front external and front internal USB ports.

In This Section Front Panel Components....62 Front Panel LEDs and Buttons....63 Rear Panel Components....64 Rear Panel LEDs and Buttons....65 System Board Components....67 System Maintenance Switch....68 NMI Switch.....68 System Board LEDs....69 System LEDs and Internal Health LED Combinations...70 Internal USB Connector....72 SCSI IDs and SATA Device Numbers....73 Hot-Plug SCSI Hard Drive LEDs....73 Hot-Plug SCSI Hard Drive LED Combinations...74 Optional Battery-Backed Write Cache Enabler LEDs...75 Battery-Backed Write Cache Enabler LED Statuses...76 Fan Module Locations....77 Processor Zone Fan Module LED...77

Front Panel Components

Description Diskette drive bay Optical device bay Front USB port Hard drive bay 0 Hard drive bay 1
Front Panel LEDs and Buttons
Description Power On/Standby button and system power LED
Status Green = System is on. Amber = System is shut down, but power is still applied. Off = Power cord is not attached, power supply failure has occurred, no power supplies are installed, facility power is not available, or the DC-to-DC converter is not installed.

UID button/LED

Blue = Identification is activated. Flashing blue = System is being remotely managed. Off = Identification is deactivated.

Internal health LED

Green = System health is normal. Amber = System is degraded. To identify the component in a degraded state, refer to system board LEDs (on page 69). Red = System critical. To identify the component in a critical state, refer to system board LEDs (on page 69). Off = System health is normal (when in standby mode).
External health LED (power supply)
Green = Power supply health is normal. Amber = Power redundancy failure occurred. Off = Power redundancy failure has occurred. When the server is in standby mode, power supply health is normal.
Description NIC 1 link/activity LED
Status Green = Network link exists. Flashing green = Network link and activity exist. Off = No link to network exists. If power is off, view the LEDs on the RJ-45 connector for status by referring to the rear panel LEDs ("Rear Panel LEDs and Buttons" on page 65).

NIC 2 link/activity LED

Green = Network link exists. Flashing green = Network link and activity exist. Off = No link to network exists. If power is off, the front panel LED is not active. View the LEDs on the RJ-45 connector for status by referring to the rear panel LEDs ("Rear Panel LEDs and Buttons" on page 65).

Rear Panel Components

Description PCI-X expansion slot 1, 64-bit/133-MHz 3.3V (optional PCI Express slot 1, x8)

Item 12

Description PCI-X expansion slot 2, 64-bit/133-MHz 3.3V (optional PCI Express slot 2, x8) Power supply bay 2 Power supply bay 1 (populated) Rear USB connector 10/100/1000 NIC 2 10/100/1000 NIC 1 iLO management port Mouse connector Keyboard connector Video connector Serial connector

Rear Panel LEDs and Buttons

Description iLO activity

Status Green = Activity exists. Flashing green = Activity exists. Off = No activity exists.

iLO link

Green = Link exists. Off = No link exists.
10/100/1000 NIC 2 activity
Green = Link exists. Flashing green = Activity exists. Off = No link exists.

10/100/1000 NIC 2 link

Green = Link exists. Off = No link exists. Green = Link exists. Off = No link exists. Green = Activity exists. Flashing green = Activity exists. Off = No activity exists.

10/100/1000 NIC 1 link

10/100/1000 NIC 1 activity
Blue = Identification is activated. Flashing blue = System is being managed remotely. Off = Identification is deactivated.

System Board Components

Item 5 6
Description DIMM slots (1-4) NMI switch System maintenance switch (SW2) Processor 1 socket Processor 2 socket Processor zone fan module connector SCSI backplane connector* Optical device connector

Item 13 14

Description Power supply connector Power supply signal connector Smart Array 6i memory module connector* Remote management connector SATA connectors (SATA model only) PCI riser board assembly connector (for slot 2 riser board) PCI riser board assembly connector (for slot 1 riser board) System battery

* For SCSI models only

System Maintenance Switch
Position S1 Default Off Function Off = iLO security is enabled. On = iLO security is disabled. S2 Off Off = System configuration can be changed. On = System configuration is locked. S3 S4 S5 Off Off Off Reserved Reserved Off = Power-on password is enabled. On = Power-on password is disabled. S6 Off Off = No function On = ROM treats the system configuration as invalid. S7, S8 Off, Off Debug LEDs

NMI Switch

The NMI switch allows administrators to perform a memory dump before performing a hard reset. Crash dump analysis is an essential part of eliminating reliability problems, such as hangs or crashes in operating systems, device drivers, and applications. Many crashes freeze a system, requiring you to do a hard reset. Resetting the system erases any information that would support root cause analysis. Systems running Microsoft Windows operating systems experience a blue screen trap when the operating system crashes. When this happens, Microsoft recommends that system administrators perform an NMI event by pressing a dump switch. The NMI event enables a hung system to become responsive again.

Processor in socket X is in a pre-failure condition. Processor types are mismatched. PPM has failed. DIMM in slot X has failed. DIMM in slot X is an unsupported type, and no valid memory exists in another bank. DIMM in slot X has reached single-bit correctable error threshold. DIMM in slot X is in a pre-failure condition. DIMM in slot X is an unsupported type, but valid memory exists in another bank.
DIMM failure, all slots in one bank (Amber) Overtemperature (Amber)

Red Amber Red

No valid or usable memory is installed in the system. The Health Driver has detected a cautionary temperature level. The server has detected a hardware critical temperature level. The PCI riser board assembly is not seated. Bank X failed over to the online spare memory bank.
Riser interlock (Amber) Online spare memory (Amber)

Red Amber

System LED and Color Power converter module interlock (Amber) Fan module (Amber) Fan module (Red)
Internal Health LED Color Red
Status The power converter module is not seated.

Amber Red

A redundant fan has failed. The minimum fan requirements are not being met in one or more of the fan modules. One or more fans have failed or are missing. The power supply signal cable is not connected to the system board.
Power supply signal interlock (Amber)

Internal USB Connector

The front internal USB connector is located in the processor zone fan module.
For more information, refer to "Internal USB Functionality (on page 60)."
SCSI IDs and SATA Device Numbers
Hot-Plug SCSI Hard Drive LEDs
LED Description Activity status
Status On = Drive activity Flashing = High activity on the drive or drive is being configured as part of an array. Off = No drive activity

Online status

On = Drive is part of an array and is currently working. Flashing = Drive is actively online. Off = Drive is offline.

Fault status

On = Drive failure Flashing = Fault-process activity Off = No fault-process activity
Hot-Plug SCSI Hard Drive LED Combinations
Activity LED (1) On, off, or flashing On, off, or flashing Online LED (2) On or off Fault LED Interpretation (3) Flashing A predictive failure alert has been received for this drive. Replace the drive as soon as possible. On Off The drive is online and is configured as part of an array. If the array is configured for fault tolerance and all other drives in the array are online, and a predictive failure alert is received or a drive capacity upgrade is in progress, you may replace the drive online. Flashing Off Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is rebuilding or undergoing capacity expansion. On Off Off Do not remove the drive. The drive is being accessed, but (1) it is not configured as part of an array; (2) it is a replacement drive and rebuild has not yet started; or (3) it is spinning up during the POST sequence.

On or flashing

Activity LED (1) Flashing

Online LED (2) Flashing

Fault LED Interpretation (3) Flashing Do not remove the drive. Removing a drive may cause data loss in non-fault-tolerant configurations. Either (1) the drive is part of an array being selected by an array configuration utility; (2) Drive Identification has been selected in HP SIM; or (3) drive firmware is being updated.
The drive has failed and has been placed offline. You may replace the drive.
Either (1) the drive is not configured as part of an array; (2) the drive is configured as part of an array, but it is a replacement drive that is not being accessed or being rebuilt yet; or (3) the drive is configured as an online spare. If the drive is connected to an array controller, you may replace the drive online.
Optional Battery-Backed Write Cache Enabler LEDs

Item 1 2

LED Color Amber Green
For LED status information, refer to "Battery-Backed Write Cache Enabler LED Statuses (on page 76)."
Battery-Backed Write Cache Enabler LED Statuses
Server Status LED Status Battery Module Status Fast charging Trickle charging A short exists in the connection of one or more of the four button cells within the battery module An open exists in the circuit between the positive and negative terminals of the battery module Normal Temporary lock-out state; data was lost due to cable being detached Server is on and has normal run Green = On time Green = Off Amber = On Amber = Blinking
Amber = Off Server is on and is in the first 30 Green = On seconds after power up Amber = On Server is off and is in data retention mode
Amber = Blinking every User data held in write cache is being backed 15 seconds up

Fan Module Locations

Description Power supply zone fan module Processor zone fan module
Processor Zone Fan Module LED
Status Amber = One fan in this module has failed. Red = Multiple fans in this module have failed. Off = All fans in this module are operating normally.
For power supply zone fan module LED information, refer to System Board LEDs (on page 69).
In This Section Server Specifications....79 Environmental Specifications...80 Hot-Plug Power Supply Calculations...80 DDR SDRAM DIMM Specifications...80 1.44-MB Diskette Drive Specifications...81 CD-ROM Drive Specifications....82 Ultra320 SCSI Hard Drive Specifications...83 Serial ATA Hard Drive Specifications....83

PCI Express peripheral component interconnect express PCI-X peripheral component interconnect extended PDU power distribution unit POST Power-On Self-Test PPM Processor Power Module PSP ProLiant Support Pack PXE preboot eXecution environment RBSU ROM-Based Setup Utility RILOE II Remote Insight Lights-Out Edition II SATA serial advanced technology attachment
SCSI small computer system interface SDRAM synchronous dynamic RAM SIM Systems Insight Manager SIMM single inline memory module SPM system power module SSD support software diskette TMRA recommended ambient operating temperature UID unit identification USB universal serial bus VCA version control agent
VHDCI very high density cable interconnect WOL Wake-on LAN
AC power supply 27 ASR (Automatic Server Recovery) 58, 85 Automatic Server Recovery (ASR) 58 Autorun Menu 53

drive LEDs 73, 74

electrostatic discharge 14 environmental requirements 80 environmental specifications 80 expansion slots 64 extending server from rack 17 external health LED 62, 63
battery 38, 45, 67, 68 Battery-Backed Write Cache Enabler 38 Battery-Backed Write Cache Enabler LEDs 75, 76 BIOS upgrade 56 blanks 19, 22, 24 blue screen event 68 buttons 61 fan connectors 67 fan LED 73, 77 fan zones 74 fans 77 features 61 flash ROM 56 front panel components 62 front panel LEDs 63
cable management arm 18 cabling 49 CD ejector assembly 26 CD-ROM drive 25, 82 CD-ROM drive blank 24 component identification 62, 63, 64, 65, 67, 68, 69 components 61 connectors 61 crash dump analysis 68 hard drive blanks 19 hard drive LEDs 73, 74 hard drives 62, 73, 74, 83 hard drives, determining status of 73 Health Driver 58, 73 health LEDs 63, 73 HP Insight Diagnostics 59 HP ProLiant Essentials Foundation Pack 59 HP Systems Insight Manager, overview 59
illustrated parts catalog 7 iLO (Integrated Lights-Out) 58, 64 IML (Integrated Management Log) 57 Insight Diagnostics 59 Instant Support Enterprise Edition 55 Integrated Management Log (IML) 57 internal health LED 62, 63
DC power supply 67 diagnostic tools 53, 56, 58 DIMM slot LEDs 73 DIMM slots 67 DIMMs 40 diskette drive 81

keyboard connector 64

laser devices 82 LEDs 61, 63, 65, 69, 70, 72, 73, 74, 77 LEDs, hard drive 73
management tools 53 memory 40 memory dump 68 memory slots 67 mouse connector 64
Power On/Standby button 16, 62, 63 power requirements 80 power supplies 64, 65, 80 power supply LEDs 65 power supply output 80 power supply signal connector 67 power supply zone fans 28, 77 powering down 16 PPM failure LEDs 74 preparation procedures 15 processor zone fans 29, 77 processors 42, 67
RBSU (ROM-Based Setup Utility) 56 rear panel buttons 65 rear panel connectors 64 rear panel LEDs 65 remote support and analysis tools 55 removal and replacement procedures 13 required tools 13 resetting the system 68 RJ-45 connectors 64 RJ-45 network connector LEDs 65 ROM, updating 56 ROMPaq utility 56

network connector LEDs 65 NIC (network interface controller) 86 NIC connectors 64 NIC LEDs 62, 63 NMI switch 68
Online ROM Flash Component Utility 56 online spare memory 40 operating system crash 68 Option ROM Configuration for Arrays (ORCA) 55 ORCA (Option ROM Configuration for Arrays) 55 overtemperature LED 74
safety considerations 14 SATA connectors 51, 67 SATA drives 73 SCSI backplane 31 SCSI connectors 67 SCSI IDs 73 serial connector 64, 68 server asset text 47 server setup 14 server warnings and cautions 14 Smart Array 6i memory connector 67 SmartStart Autorun Menu 53 SmartStart Scripting Toolkit 54 SmartStart, overview 53 spare part numbers 7
PCI riser board 33, 35 power connectors, internal 67 power converter module 36 power converter module cabling 50 power cord connector 68 power LEDs, system 63
specifications 79 specifications, server 79, 80, 81, 82, 83 static electricity 14 support packs 53 switches 67 system board 46 system board battery 45 system board components 67 system board LEDs 69, 70 system maintenance switch 68 system power connector 67 system power LED 63 Systems Insight Manager 59
telco racks 15 temperature requirements 80 tools 53
UID LEDs 16, 62, 63, 64, 65 USB connectors 64 USB support 59, 60 utilities 55, 56, 59
VHDCI SCSI connector 64 video connector 64