Network Controller

Two NC7781 PCI-X Gigabit NICs (embedded)

Expansion Slots

I/O (3 Total, 3 Available) 64-bit/100-MHz PCI Non-Hot Plug 64-bit/133-MHz PCI-X Non-Hot Plug 2 and 3 1
PCI Voltage: 3.3 Volt only 3.3 Volt only

Manageability

Integrated Lights-Out (iLO) Standard Management (ASIC on the System Board)

Page 3

Storage Controllers
Smart Array 5i Plus Controller, Ultra3 (supports RAID 0, 1, across internal hard disk drives) with 64 MB of memory 64-MB total memory for code, transfer buffers, and read/write cache on the 5i Plus Memory Module Connector for Battery Backed Write Cache (BBWC) Enable NOTE: The Smart Array 5i Plus Controller is integrated on the system board and is designed to support the simplex drive cage. An external SCSI port is not available on the HP ProLiant DL560. External SCSI solutions require the addition of a PCI or PCI-X option card.

Storage Data Protection

The Battery-Backed Write Cache (BBWC) Enabler protects up to 64-MB write cache memory from hard boot, power, controller, or system board failures. Standard on HP ProLiant DL560 2P Models, optional on 1P Models Battery charge/life: Up to 72 hours/ 3 years Transportable data protection Increases overall controller performance NOTE: Safely transport your write cache data to another HP ProLiant DL560 in the data center be removing the BBWC Enabler and 5i Plus Memory Module simultaneously (connected by short cable).

Storage

Diskette Drive Optical Drive Hard Drives Maximum Internal Storage Hard Disk Drive Backplane
1.44 MB Diskette Drive 24x IDE CD-ROM Drive (slimline) ejectable for security and serviceability None 600 GB (2 x 300 GB Ultra320 1" SCSI drives) (internal hot plug Ultra3 drive cage) Internal Wide Ultra3 backplane supports up to two 1" hard disk drives

Interfaces

Serial Pointing Device (Mouse) Graphics Keyboard Rear USB Ports iLO Remote Management Network RJ-45 USB 1.0

Graphics

Integrated 1280 x 1024, 16M color on PCI local bus, 8-MB of SDRAM video memory

Form Factor

Rack (2U = 3.5 inches), ships with sliding rails and cable management system Space saving form factor (2U) provides space efficiencies while providing maximum deployment flexibility
ProLiant Essentials Foundation Pack Software DA - 11595 Worldwide Version 46 December 16, 2005 Page 4
ProLiant Essentials Foundation Pack Software HP Systems Insight Manager
HP's new HP Systems Insight Manager (HP SIM) helps maximize system uptime and performance and reduce system maintenance costs by providing proactive notification of problems before those problems result in unplanned downtime or reduced productivity. HP SIM are both easy to set up work with the Insight Management Agents, integrated Lights-Out and Remote Insight Lights-Out Edition, and Version Control Agents to deliver robust fault, configuration, and asset management as well as remote administration. With HP SIM customers will also be able to take advantage of role-based security; the ability to manage ProLiant, Integrity, and HP 9000 systems; and plug-ins for storage, client, printer, and power management as well as server rapid deployment, performance management, and workload management. For more details on HP SIM visit http://www.hp.com/go/hpsim. SmartStart is a tool that simplifies server setup, providing a rapid way to deploy reliable and consistent server configurations. For more information, please visit the SmartStart Web site at http://www.hp.com/servers/smartstart. SmartStart version supported (minimum): SmartStart 6.20. The Management Agents form the foundation for HP's Intelligent Manageability strategy. They provide direct, browser-based access to indepth instrumentation built into HP servers, workstations, desktops, and portables, and send alerts to Systems Insight Manager and other enterprise management applications in case of subsystem or environmental failures. For additional information about the Management Agents and other management products from HP, please visit the management Web site at http://www.hp.com/servers/manage. Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides automatic delivery of software and driver change notifications for ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis. The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options available in SmartStart or downloadable from Software and Drivers download pages, linked from the SmartStart website at www.hp.com/servers/smartstart. The most advanced configuration analysis, reporting and troubleshooting utilities used by HP and at your fingertips, available in SmartStart.

SmartStart

Management Agents

Subscriber's Choice

ROMPaq, support software, and configuration utilities Survey Utility and diagnostics utilities

Page 5

Optional ProLiant Essentials Value Packs
Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to address specific business problems and needs: Rapid Deployment Pack - an automated solution for multi-server deployment and provisioning, enabling companies to quickly and easily adapt to changing business demands. Workload Management Pack - provides easier management of complex environments, improving overall server utilization and enabling Windows 2000 customers for the first time to confidently deploy multiple applications on a single multiprocessor ProLiant Server. Integrated Lights-Out Advanced Pack - upgrades the Integrated LightsOut processor to full virtual presence and control with graphical console and virtual media. Performance Management Pack - a performance management solution that identifies and explains hardware performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable resources. Intelligent Networking Pack - detects and analyzes network bottlenecks or broken network linkages and steers traffic to the optimum route based on network conditions, plus it provides an extra layer of protection. The virus throttle feature of the solution slows the propagation of fast spreading virus Vulnerability and Patch Management Pack - identifies and remediates software security vulnerabilities due to missing patches as well operating system configurations that can be exploited by viruses, worms, and other blended threats Virtual Machine Management Pack - provides central management and control of virtual machines from Microsoft and VMware. Integrated approach provides the ability to manage both physical and virtual resources from a single management console.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information. NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials

Industry Standard Compliance
ACPI 2.0 Compliant PCI 2.2 Compliant PXE Support WOL Support Physical Address Extension (PAE) Support Microsoft Logo certifications

Page 6

Intelligent Manageability Integrated Lights-Out (iLO) Standard Management
Virtual Text Remote Console Virtual Power Button Control Dedicated LAN Connectivity Automatic IP Configuration via DHCP/DNS/WINS Industry Standard 128-bit Secure Sockets Layer (SSL) Security IML and iLO Event Logging Support for 12 user accounts with customizable access privileges Integrated Lights-Out (iLO) Advanced Pack (supports Advanced features such as Graphical Remote Console and Virtual Floppy - available as a separate option) Automatic Server Recovery-2 (ASR-2) HP Systems Insight Manager Redundant ROM Remote Flash ROM ROM-Based Setup Utility (RBSU) Integrated Management Log (IML) Hot Spare Boot NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the system will automatically reboot and use the remaining good processor(s). Dynamic sector repairing and drive parameter tracking (with Smart Array controllers) Redundant/adaptive load balancing NIC Support

Availability

Standard Advanced ECC functionality detects and corrects single bit and specific multi-bit memory errors (4bit and 8bit) while using industry standard registered DIMMS. Functionality is embedded in the chipset design. HP Advanced Memory Protection Technology delivers unsurpassed memory protection and server availability: Online Spare Memory: Offers a higher level of memory protection than Advanced ECC alone. If the number of single-bit correctable errors on a bank exceeds the pre-defined error threshold, that bank will fail over to the online spare bank without intervention or server interruption. The failed memory can then be replaced at the user's convenience during a scheduled maintenance window. NOTE: All HP Advanced Memory Protection modes are user configurable through the ROM-Based Setup Utility (RBSU) and viewable through Insight Manager 7 and the Integrated Management Log (IML.). Smart Array 5i Plus Controller with standard Battery Backed Write Cache (BBWC) Enabler provides transportable data protection and increases overall controller performance. Up to 64MB Battery Backed Write Cache protection available on 2P HP ProLiant DL560 models (BBWC Enabler is optional on 1P model). Redundant Cooling Zones across major server subsystems (Memory, I/O, CPU) provide 7x24 cooling. Each zone is independent of each other and is able to support N+1 redundancy, as indicated below. This zone configuration enables the server to withstand up to three fan failures, provided that they are not within the same zone. Each fan is hot plug redundant and individually removable. Up to two Hot Plug Ultra3 Drive Bays Simplex SCSI Backplane Dual Hot Plug Redundant Power Supplies (standard on 2P Models, one ships standard on 1P Models)

Page 8

Required Cabling For required cabling information, refer to the HP Web site at http://h18000.www1.hp.com/products/servers/proliantDL560/.

OS Support

Microsoft Windows 2000 Windows Server 2003 Novell NetWare LINUX (Red Hat, SuSE) UnitedLinux VMware Virtualization Software NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS Support Matrix at: http://www.hp.com/go/supportos NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant DL560, please see: http://www.HP.com/support/files/server/us/index.html. NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux website at http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html NOTE: For more complete and up-to-date information on how to buy server operating systems from HP please visit the OS product site at: http://h18004.www1.hp.com/products/servers/software/OEM.html NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware Server Support Matrix at: http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html.
Rack Airflow Requirements
Rack 10000 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors. CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment: Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm). CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage. NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: http://www5.HP.com/products/servers/proliantdl560/index.html.

Page 10

NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack NOTE:For more complete information on HP Services offerings, customers and resellers, please visit us NOTE: at: http://www.hp.com/hps NOTE: Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Page 11

Models
DL560R01 X3.0GHz4MB, 1024MB (2P) 346921-xx1 Processor(s) Cache Memory Memory Network Controller Storage Controller Manageability Hard Drives Internal Storage Power Supply Optical Drive Diskette Drive Form Factor
(2) Intel Xeon Processors MP at 3.0 GHz standard (up to 4 supported) 4MB Integrated Level 3 Cache 1024 MB 200-MHz (DDR) SDRAM (PC2100-MHz Registered SDRAM Memory with Advanced ECC functionality) (Standard) to 12 GB (Maximum) Two NC7781 PCI-X Gigabit NICs (embedded) Smart Array 5i Plus Controller (Ultra3) with Battery-Backed Write Cache Enabler (integrated on system board) Integrated Lights-Out (iLO) Standard management (integrated on system board) None ship standard 293.6 GB maximum (with optional hard drives) Two 550W Hot Plug Redundant Power Supplies (low line or high line) 24x IDE slimline CD-ROM Drive 1.44 MB Diskette Drive Rack 2U
DL560R01 X2.7-2MB, 1024MB (2P) 346920-xx1
Processor(s) Cache Memory Memory Network Controller Storage Controller Manageability Hard Drives Internal Storage Power Supply Optical Drive Diskette Drive Form Factor
(2) Intel Xeon Processors MP at 2.7 GHz standard (up to 4 supported) 2MB Integrated Level 3 Cache 1024 MB 200-MHz (DDR) SDRAM (PC2100-MHz Registered SDRAM Memory with Advanced ECC functionality) (Standard) to 12 GB (Maximum) Two NC7781 PCI-X Gigabit NICs (embedded) Smart Array 5i Plus Controller (Ultra3) with Battery-Backed Write Cache Enabler (integrated on system board) Integrated Lights-Out (iLO) Standard management (integrated on system board) None ship standard 293.6 GB maximum (with optional hard drives) Two 550W Hot Plug Redundant Power Supplies (low line or high line) 24x IDE slimline CD-ROM Drive 1.44 MB Diskette Drive Rack 2U

Page 12

DL560R01 X2.2-2MB, 1024MB (1P) 346919-xx1 Processor(s) Cache Memory Memory Network Controller Storage Controller Manageability Hard Drives Internal Storage Power Supply Optical Drive Diskette Drive Form Factor
(1) Intel Xeon Processor MP at 2.2 GHz standard (up to 4 supported) 2MB Integrated Level 3 Cache 1024 MB 200-MHz (DDR) SDRAM (PC2100-MHz Registered SDRAM Memory with Advanced ECC functionality) (Standard) to 12 GB (Maximum) Two NC7781 PCI-X Gigabit NICs (embedded) Smart Array 5i Plus Controller (Ultra3) (integrated on system board) Integrated Lights-Out (iLO) Standard management (integrated on system board) None ship standard 293.6 GB maximum (with optional hard drives) One 550W Hot Plug Redundant Power Supplies (low line or high line) 24x IDE slimline CD-ROM Drive 1.44 MB Diskette Drive Rack 2U

DL560R01 X2.0-1MB, 1024MB (1P) 246638-xx2
(1) Intel Xeon Processor MP at 2.0 GHz standard (up to 4 supported) 1MB Integrated Level 3 Cache 1024 MB 200-MHz (DDR) SDRAM (PC2100-MHz Registered SDRAM Memory with Advanced ECC functionality) (Standard) to 12 GB (Maximum) Two NC7781 PCI-X Gigabit NICs (embedded) Smart Array 5i Plus Controller (Ultra3) (integrated on system board) Integrated Lights-Out (iLO) Standard management (integrated on system board) None ship standard 293.6 GB maximum (with optional hard drives) One 550W Hot Plug Redundant Power Supplies (low line or high line) 24x IDE slimline CD-ROM Drive 1.44 MB Diskette Drive Rack 2U

Country Code Key

XX=00 XX=01 XX=03 XX=20 XX=29 XX=37 XX=42 XX=AA
US Australia UK Brazil EURO APD Int'l, Europe, Germany, France PRC

Page 13

Options
ProLiant Essentials Value Pack Software
ProLiant Essentials Integrated Lights-Out Advanced Pack ProLiant Essentials Integrated Lights-Out Advanced Pack, 1 server Featuring: sophisticated virtual administration features for ultimate control of servers in the data centers and remote sites. NOTE: For additional ProLiant Integrated Light-Out Advanced Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11052_div/11052_div.HTML ProLiant Essentials Intelligent Networking Pack ProLiant Essentials Intelligent Networking Pack - Windows Edition, Single Server License NOTE: For use with a single server. Contains one license with a unique license activation key and documentation. NOTE: For additional ProLiant Intelligent Networking Pack - Windows License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12062_div/12062_div.HTML ProLiant Essentials Intelligent Networking Pack - Linux Edition, Single Server License NOTE: For additional ProLiant Intelligent Networking Pack - Linux License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12327_div/12327_div.HTML ProLiant Essentials Performance Management Pack ProLiant Essentials Performance Management Pack, Single-Server License NOTE: For use with a single server. Contains one license with a unique license activation key, HP Management CD and documentation. NOTE: The most recent version of the software can always be downloaded at http://www.hp.com/products/pmp. NOTE: For additional ProLiant Performance Management Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11925_div/11925_div.HTML ProLiant Essentials Rapid Deployment Pack Windows Edition and Linux Edition Release Rapid Deployment Pack, Single-Server License NOTE: This license allows 1 server to be deployed and managed via RDP. Rapid Deployment Pack, Single-Server License (Japan) NOTE: This license allows 1 server to be deployed and managed via RDP. NOTE: For additional ProLiant Essentials Rapid Deployment Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.HTML http://h18000.www1.hp.com/products/quickspecs/11713_div/11713_div.HTML ProLiant Essentials Workload Management Pack ProLiant Essentials Workload Management Pack, Single Server License NOTE: For additional ProLiant Workload Management Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11452_div/11452_div.HTML ProLiant Essentials Virtualization Management Software ProLiant Essentials Virtual Machine Management Pack, Single-Server License NOTE: For use with a single server. Contains one license with a unique license activation key and documentation.

263825-B21

372906-B21

397004-B21

306696-B21

267196-B21 267196-291

303284-B21

372214-B21

Page 14
ProLiant Essentials Server Migration Pack, Single-Migration License NOTE: Contains one license, enabling 1 server migration, with a unique license activation key and documentation. NOTE: This license allows 1 server to be migrated from a physical server to a virtual machine. Or this license can be used to migrate a virtual machine from one virtualization layer i.e. VMware GSX to a different virtualization layer such as VMware ESX or Microsoft Virtual Server 2005. NOTE: For additional ProLiant Essentials Virtualization Management Software License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12328_div/12328_div.HTML ProLiant Essentials Vulnerability and Patch Management Pack ProLiant Essentials Vulnerability and Patch Management Pack, Single-Server License NOTE: For use with a single server. Contains one license with a unique license activation key and documentation. NOTE: For additional ProLiant Vulnerability and Patch Management Pack License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12111_div/12111_div.HTML NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information. NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials.

375345-B21

371645-B21

Processor

Intel Xeon MP X3.0/4MB Processor Option Kit Intel Xeon MP X2.70/2MB Processor Option Kit Intel Xeon MP X2.20/2MB Processor Option Kit Intel Xeon MP X2.80/2MB Processor Option Kit Intel Xeon MP X2.50/1MB Processor Option Kit Intel Xeon MP X2.0/1MB Processor Option Kit
346990-B21 346989-B21 346988-B21 331004-B21 331003-B21 331002-B21

Memory (DIMMs)

4 GB of PC2100 DDR SDRAM DIMM Memory Kit (2 x 2 GB) 2 GB of PC2100 DDR SDRAM DIMM Memory Kit (2 x 1 GB) 1 GB of PC2100 DDR SDRAM DIMM Memory Kit (2 x 512 MB) 512 MB of PC2100 ECC DDR DIMM Memory Kit (2 x 256 MB)
300682-B21 300680-B21 300679-B21 300678-B21

Optical Drives

Slimline CD-RW/DVD-ROM Combo Drive Option Kit Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers) HP DVD+R/RW 8X Slim
331903-B21 264007-B21 383975-B21

Page 15

Hard Drives
Ultra320 SCSI - Universal Hot Plug
300-GB 10,000 rpm U320 Universal Hard Drive (1") 146.8-GB 10,000 rpm U320 Universal Hard Drive (1") 72.8-GB 10,000 rpm U320 Universal Hard Drive (1") 146.8-GB 15,000 rpm U320 SCSI Hard Drive (1") 72.8-GB 15,000 rpm U320 Universal Hard Drive (1") 36.4-GB 15,000 rpm U320 Universal Hard Drive (1") NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates. NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature: U320 Hard Drive QS: http://h18000.www1.hp.com/products/quickspecs/11531_div/11531_div.HTML (Worldwide) http://h18000.www1.hp.com/products/quickspecs/11531_na/11531_na.HTML (North America) 350964-B22 286716-B22 286714-B22 347708-B22 286778-B22 286776-B22

Storage Controller

Smart Array 6402/128 Controller Smart Array 6404/256 Controller 512MB DDR BBWC Upgrade Smart Array 641 Controller Smart Array 642 Controller 256-MB Battery-Backed Cache Module NOTE: This 256-MB Battery-Backed Cache Module supports the Smart Array 5300 series controllers, HP StorageWorks Modular Smart Array 1000 and the HP StorageWorks Modular Array 500. Battery-Backed Write Cache Enabler Option Kit NOTE: This Battery-Backed Write Cache Enable Option Kit (PN 255514-xx1) is optional for the HP ProLiant DL560 1P Model only. Battery-Backed Write Cache Enabler Option Kit (Japan) NOTE: NOTE This Battery-Backed Write Cache Enable Option Kit (PN 255514-xx1) is optional for the HP ProLiant DL560 1P Model only. 128MB Battery-Backed Cache Enabler NOTE: This 128MB BBWC supports the Smart Array 641 Controller and Smart Array 642 Controller. 64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter 64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS Ultra320 Expansion Module for SA-6402

379006-001 379005-001 292302-B22 257415-B21 257415-B22 245160-B21 245160-B23 245161-B21 245161-B22 245161-B23 245162-B21 245162-B22 245162-B23 245163-B21 245163-B22 245163-B23
Rack Options for HP Rack 10000 Series
HP Rack Light Kit (Neon) HP Rack Plinth Kit (Carbon) 42U Side Panel Graphite Metallic 36U Side Panel Graphite Metallic 47U Side Panel Graphite Metallic TFT7210R Rack Mounted 17" Monitor NOTE: For a complete list of Monitors please view the following URL: http://h18004.www1.hp.com/products/monitors/. TFT5600 Rack Keyboard Monitor NOTE: For a complete list of Monitors please view the following URL: http://h18004.www1.hp.com/products/monitors/. 1U Rack Keyboard & Drawer (Carbon) Country Code Key (for TFT5600 Rack Keyboard Monitor (PN 221546-xx1 and for 1U Rack Keyboard & Drawer (PN 257054-xx1)
361589-B21 251960-B21 246099-B21 246102-B21 255486-B21 348373-B21

221546-xx1

257054-xx1

Page 24

XX = 001 XX = 031 XX = 041 XX = 051 XX = 061 XX = 071 XX = 081 US UK Germany France Italy Spain Denmark XX = 091 XX = 101 XX = 111 XX = 131 XX = 181 XX = 291 XX = B31
Norway Sweden/Finland Switzerland Portugal Belgium Japan International
NOTE: For additional information regarding Rack Options, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rackoptions/index.html. HP KVM Switch Options IP Console Switch Box (KVM/IP), 3 x 1 x 16 IP Console Switch Box (KVM/IP), 1 x 1 x 16 Server Console Switch (KVM), 0 x 1 x 8 port Server Console Switch (KVM), 0 x 2 x 16 port PS/2 Interface Adapter, 1 pack PS/2 Interface Adapter, 8 pack USB Interface Adapter, 1 pack Serial Interface adapter - 1 Pack with power supply NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm. HP 1x 4 USB/PS2 KVM Switch, TT (NA/JPN) HP 1x 4 USB/PS2 KVM Switch, TT (AU/NZ) HP 1x 4 USB/PS2 KVM Switch, TT (UK) HP 1x 4 USB/PS2 KVM Switch, TT (EU) HP 1x 4 USB/PS2 KVM Switch, RM (ALL) HP PS2 KVM Cable with audio, 6', 2-pack HP USB KVM Cable with audio, 6', 2-pack NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
HP Serial Console Server HP 16 Port Serial Console Server (worldwide) Options HP 48 Port Serial Console Server (worldwide) Serial Adapter, RJ45-DB9 DCE Female, 1 Pack Serial Adapter, RJ45-DB9 DCE Female, 8 Pack NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console Servers. Additional Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm. NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.

AF101A AF102A AF103A AF110A

Page 25

Rack Options for Third party Cabinet Racks
Round hole rack cabinet rail kit NOTE: Support for racks with round mounting holes (include HP Rack System /E and HP Systems) with and adjustment range of 24 inches to 36 inches (60.96 cm to 91.44 cm).

293052-B21

Service and Support Hardware Services On-site Service Offerings (HP Care Pack 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic Services) 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic

U4697E U4698E U4699E

Installation & Start-up Services Hardware Installation, Electronic Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am5pm, M-F, excl. HP holidays, Electronic Support Plus Onsite HW support, 8am-9pm, M-F, 4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays, Electronic Onsite HW support, 8am-9pm, M-F, 4hr response and Linux O/S SW Tech support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays, Electronic Support Plus 24 Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic Onsite HW support 24x7, 4hr response and Linux O/S SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack

U4707E U4708E

U4709E

U4711E

U4710E U4712E

Page 26

Memory
HP ProLiant DL560 Standard Memory 1024 MB PC2100 Registered DDR SDRAM DIMM Memory comes installed (2 x 512 MB SDRAM)
Standard Memory Plus Optional Memory Up to 9216 MB memory is available with the optional installation of PC2100 Registered DDR SDRAM DIMM Memory Option Kit Standard Memory Replaced with Optional Memory Up to 12,288 MB of memory is available with the removal of the standard 1024 MB of memory, the optional installation of PC2100 Registered DDR SDRAM DIMM Memory Option Kit NOTE: This chart does not represent all possible memory configurations. Memory Standard 1024 MB Optional 9,216 MB Maximum 12,288 MB MB 512 MB 2048 MB MB 512 MB 2048 MB Standard Memory Board (Slots) Empty Empty 2048 MB 2048 MB 2048 MB 2048 MB 5 Empty 2048 MB 2048 MB 6 Empty 2048 MB 2048 MB 300678-B21 300679-B21 300680-B21 300682-B21
The following memory options are available from HP: 512 MB of PC2100 ECC DDR DIMM Memory Kit (2 x 256 MB) 1 GB of PC2100 DDR SDRAM DIMM Memory Kit (2 x 512 MB) 2 GB of PC2100 DDR SDRAM DIMM Memory Kit (2 x 1 GB) 4 GB of PC2100 DDR SDRAM DIMM Memory Kit (2 x 2 GB)

Page 27

A B 0-1 1.44-MB Diskette Drive
Ejectable: 24x IDE CD-ROM (Slimline) Wide Ultra3/Ultra320 Drive Cage

Drive Support

Quantity Supported Slim Line Drives 1.44-MB slim-line Diskette Up to 1 Drive Ejectable IDE slim-line Up to 1 CD-ROM Drive Slimline DVD-ROM Drive Up to 1 (8X/24X) Option Kit (ejectable) Position Supported A B B
Controller Integrated Integrated IDE Integrated IDE
Hard Drives Ultra320 Hot Pluggable Drives Quantity Position Supported Supported Controller 1-inch 300-GB 10,000 rpm Up to 2 0-1 Integrated Dual Channel Wide Ultra3 SCSI Adapter 146.8-GB 10,000 rpm Smart Array 6402/128Controller 72.8-GB 10,000 rpm Smart Array 641 Controller 146.8-GB 15,000 rpm Smart Array 642 Controller 72.8-GB 15,000 rpm 64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter 36.4-GB 15,000 rpm NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates.

Page 28

External Storage Quantity Supported 1 per SCSI VHDCI connector Up to 13 Position Supported External Host Controller or Adapter Smart Array 6402/128 Controller Smart Array 6404/256 Controller

Modular Smart Array 20

Modular Smart Array 30 Family

External

Modular Smart Array External G2 System Modular Smart Array Please see the External 1000 Modular Smart Array 1000 QuickSpecs below to determine configuration requirements Modular Smart Array Please see the External Please see the Modular Smart Array 1500 cs QuickSpecs (URL 1500 cs Modular Smart below) for the latest list of supported HBAs Array 1500 cs QuickSpecs below to determine configuration requirements Modular Smart Array 1000: http://h18000.www1.hp.com/products/quickspecs/11033_div/11033_div.HTML (Worldwide) http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.HTML (North America) Modular Smart Array 1500: http://www.hp.com/go/MSA1500cs
Smart Array 6402/128 Controller Smart Array 6404/256 Controller Smart Array 642 Controller 64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter 64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS Please see the Modular Smart Array 500 QuickSpecs for the latest list of supported HBAs: http://www.hp.com/go/msa500 Please see the Modular Smart Array 1000 QuickSpecs (URL below) for the latest list of supported HBAs
Maximum Storage Capacity (External Enclosure Attached) Internal 600 GB (2 x 300 GB Ultra320 SCSI 1" Drives) External 50.40 TB (12 x (14 x 300 GB Ultra320 SCSI 1" Drives)) Total 51.00 TB
Tape Drives, Tape Autoloaders, & Tape Libraries

Page 29

NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/North_America/10233.html (North America) http://h18000.www1.hp.com/products/quickspecs/Division/10233.html (Worldwide) NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders & Tape Libraries listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/North_America/10809.html (North America) http://h18000.www1.hp.com/products/quickspecs/Division/10809.html (Worldwide) NOTE: For complete listing of tape drive offerings see http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html For details on connecting tape drives to this server, see the following: Quantity Supported 1 Position Supported 0, 1 Controller Smart Array 5i Plus Controller (integrated on system board) 64-Bit/133MHz Dual Channel Ultra320 SCSI Adapter 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2 64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS USB port

Nema 5-15P to IEC320-C13 IEC320-C13 to IEC320-C14
Option no./Spare no: 163719-002 Option no./Spare no: 142259-001/ 142258-B21
NOTES: NOTES ActiveAnswers Power Calculation Power calculator is LIVE on ActiveAnswers Web site. This is an external link. Follow this link: http://h30099.www3.hp.com/configurator/powercalcs.asp. To drill down to calculators: - Click on: "ProLiant Servers" Click on the Server of interest. Example: DL560 Click on: "Power Calculator" link (You may need to scroll down to see it.)

Page 32

Technical Specifications
System Unit Rack Chassis Footprint (HxWxD) Weight 3.38 x 17.50 x 25.75 in (8.59 x 44.45 x 65.41 cm)
Maximum (2 Power 60 lb (27 kg) Supplies, 2 Hard Drives) Minimum (No hard drives 35 lb (16 kg) installed, one power supply) Rated Input Voltage 100 to 120 VAC/200 to 240 VAC Input Requirements Rated Input Frequency 50 to 60 Hz Input Power 690W @ 115 VAC/675W @ 230 VAC Rated Input Current 7A (100 VAC), 6A (115 VAC), 3A (230 VAC) 2375 BTU (550 Watts) Max BTU Rating Rated Steady-State Power 550W/550W (lowline/highline) Power Supply Output Power (per power supply) Maximum Peak Power 550W/550W (lowline/highline) Operating 50 to 95 F (10 to 35 C) Temperature Range Non-operating -20 to 140 F (-29 to 60 C) Shipping -22 to 122 F (-30 to 50 C) Operating 10% to 70% Relative Humidity (non-condensing) Non-operating 5% to 95% Maximum Wet Bulb 101.7 F (38.7 C) Temperature Acoustic Noise NOTE: Listed are the declared A-weighted sound power levels LWAd and the declared average bystander position sound pressure levels LpAm when operating in a 23 C ambient environment. Noise emissions were measured in accordance with ECMA 74 and declared in accordance with ECMA 109. Idle (Fixed Disk Drives Spinning) L WAd (BELS) 6.0 L pAm (dBA) 46 NOTE: These values apply to 2U rack configuration. Configuration tested included 2 processors, two 10, 000 rpm hard drive, 1 power supplies, 1 power supply fan and 4 CPU fans.

Page 33

24X Max (or higher) IDE CD-ROM Drive Slimline Disk Applicable Disk
Capacity Diameter Rotational Speed Center Hole Thickness Track Pitch Mode 1 Mode 2 CD-DA CD-XA IDE (ATAPI) Random Full-Stroke Sustained Burst 128 KB < 7seconds < 4seconds Type Wave Length Divergence Angle Output Power Temperature Humidity (HxWxD, maximum) Weight

Block Size

CD-DA, CD-ROM (Mode 1 and 2) CD-XA, CD-I (Mode 2, Form 1 and 2) Photo CD (Single and Multi-session) Mixed Mode (Audio and Data combined) 540 MB (Mode 1, 12 cm) 650 MB (Mode 2, 12 cm) 4.7 x 3.15 in/12 x 8 cm 4200 rpm maximum 0.6 in/15 mm diameter 1.2 mm 1.6 m 2,048 2,340, 2,336, 1,024 bytes 2,352 bytes 2,328 bytes 100 ms 2000 ms 150 KB/s (sustained 1X) 2100 to 3600 KB/s

Interface Access Times (typical) Data Transfer Rate Cache Buffer Start-up Time (typical) Stop Time Laser Parameters
Operating Conditions Dimensions
Semiconductor Laser GaA1As nm 53.5 1.5 0.14 mW 41 to 113 F (5 to 45 C) 10% to 80% 1.69 x 5.75 x 8.19 in (4.29 x 15 x 20.8 cm) 2.66 lb (1.2 kg)
Slimline CD-RW/DVDROM 24X Combo Drive (Multibay)
Shipping Dimensions Shipping Weight Disk
13.88 x 11.38 x 9.25 in (35.26 x 28.91 x 23.50 cm) 5 lb (2.27 kg) DVD-ROM Applicable Disk DVD-R (Read Only) 2.6 GB/side DVD-RAM (Read Only) 5.2 GB/side DVD-RAM (Read Only) CD-ROM Mode-1 data disc CD-ROM Mode-2 data disc CD Audio disc CD-Extra CD-RW Worldwide Version 46 December 16, 2005 Page 34
CD-R CD Text PhotoCD CD-I (mode 2) CD-I Ready CD-Bridge DVD-ROM

Capacity

DVD-SL DVD-DL Double Sided
4.7 GB/side 8.5 GB/side 9.40 GB/side

DVD-R DVD-RAM

Diameter Loading Mechanism Interface Access Times (typical) Audio Output Level (typical) Data Transfer Rate (sustained) Cache Buffer Spin-up Time (typical) MTBF Ambient Temperature Relative Humidity Dimensions Option Kit Contents Tray type EIDE (ATAPI) Random Full-Stroke Line-out
3.95 GB/side 2.6 GB/side and 5.2 GB/ CD-ROM Mode-MB (550 MB) Mode-MB (640 MB) DVD 2,048 bytes CD 2,352 (Mode-0) 2352, 2340, 2336, 2048 bytes (Mode-1) 2352, 2340, 2336, 2048 bytes (Mode-2) 120 mm, 80 mm (with adapter at vertical mounting mode)
DVD-ROM < 120 ms, CD-ROM < 110 ms DVD-ROM < 240 ms, CD-ROM < 160 ms CD 0.7 Vrms at 47 Kohms Load
DVD-ROM Single Layer 10.8 MB/sec. Max. DVD-RAM 2.77 MB/sec. Max CD-ROM 7.2 MB/sec. Max. 2 MB less than 10 seconds 120,000 Power On Hours (POH) Operating -22 to 140 F (-30 to 60 C) Operating 10% to 80% Storage/Transportation 5% to 95% (HxWxD, maximum) 0.5 x 5.04 x 5.1 in (12.7x128x129.4 mm) DVD-ROM drive with installation guide, warranty card, registration card

Page 35

Integrated Lights-Out Standard (integrated on system board) Architecture Processor Upgradability Video Support
Interfaces Memory Operating System Support
Client Browser Support iLO Standard Features
iLO Advanced Features (optional)
32-bit PCI-based health and remote management ASIC (Application Specific Integrated Circuit) 32-bit RISC processor core running at 66 MHz Option firmware upgradable via flash ROM. Utilizes the host server's embedded video chip. Supports VGA/SVGA, 640 x 480 (256 to 16.7M colors), 800 x 600 (256 to 16.7M colors), 1024 x 768 (256 to 65K colors), 1280 x 1024 (256 colors) One Ethernet network connection (10/100 Mb/s) 2-MB Flash ROM 8-MB SDRAM United Linux 1.0 Windows 2000 Server Windows 2000 Advanced Server Red Hat 7.x SLES8 Novell NetWare 5.x, 6.x Microsoft Internet Explorer 5.5 or later. Virtual Text Remote Console Virtual Power Button Control Dedicated LAN Connectivity Automatic IP Configuration via DHCP/DNS/WINS Industry Standard 128-bit Secure Sockets Layer (SSL) Security IML and iLO Event Logging Support for up to 12 user accounts with customizable access privileges Virtual Graphical Remote Console Virtual Floppy Drive

QuickSpecs

Overview

SmartStart 8.25
SmartStart optimizes single-server setup, providing a simple way to deploy reliable and consistent server configurations. Beginning with the 8.0 release, SmartStart is delivered on 2 CDs: one for 32-bit support, and the other for 64-bit support. SmartStart assists the server deployment process by preparing the system for installing "off-the-shelf" versions of leading operating system software. SmartStart is included in the ProLiant Essentials Foundation Pack, which also includes the Management DVD. The Foundation Pack ships standard with HP ProLiant ML and DL 300, 500 and 700 servers, and also supports HP ProLiant BL and BladeSystem c-Class servers. In an effort to support HP's commitment in reducing our overall environment impact the HP ProLiant Essentials Pack will be available as a selectable option for the HP ProLiant 300/500 Generation (G6) series servers and newer servers at the time servers are ordered through CTO. This will allow customers the flexibility to order the number of media kits that best meet their needs and eliminate receiving unnecessary duplicates. No change will be made to prior generations. Preconfigured server models will continue to ship with ProLiant Essentials Foundation Pack. To ensure that customers continue to have access to the latest updates, the contents of this kit can also be downloaded from HP at the following HP web sites: HP ProLiant Essentials Foundation Pack - www.hp.com/go/foundation SmartStart ISO images available at - http://www.hp.com/cgi-bin/hpsupport/index.pl Management DVD ISO image available at Software Depot - ProLiant Essentials Foundation Pack - Management CD

What's New

New SmartStart Features Support for newly released HP ProLiant ML/DL 300, 500, and 700 series, ProLiant Blade Servers and HP BladeSystem c-Class Support for newly supported server options SmartStart version 8.20 was the last release that contained SUSE LINUX Enterprise Server 9 (x86 and AMD64/EM64T) As of SmartStart version 8.25, only baseline support is available for the following servers, and will be remove from 8.30 versions of SmartStart and ProLiant Support Packs: HP ProLiant BL20p G2 Server Blade, HP ProLiant BL30p Server Blade, HP ProLiant BL40p Server Blade , HP ProLiant DL360 G2 Server, HP ProLiant DL360 G3 Server, HP ProLiant DL380 G2 Server, HP ProLiant DL560 Server, HP ProLiant DL580 G2 Server, HP ProLiant DL760 G2 Server, HP ProLiant ML350 G2 Server, HP ProLiant ML350 G3 Server, HP ProLiant ML370 G3 Server, HP ProLiant ML530 G2 Server and HP ProLiant ML570 G2 Server New Operating System Support Microsoft Windows Server 2008 SP2 SUSE LINUX Enterprise Server 11 (x86 and AMD64/EM64T) - (will replace SUSE LINUX Enterprise Server 9 (x86 and AMD64/EM64T) ProLiant Support Pack Updated available drivers for ProLiant Support Pack (PSP) 8.25 for Windows New drivers for ProLiant Support Pack (LSP) 8.25 for Linux

DA - 12250

North America Version 17 June 2, 2009

Page 1

ProLiant Software Maintenance Packs
Keep up-to-date with the latest software for your ProLiant servers by purchasing one of the following options: HP ProLiant Essentials Foundation Pack Single Release NOTE: Includes the current release of the following CDs: SmartStart ,Firmware Maintenance CD and Management DVD HP ProLiant Foundation Pack Single Release Software, FIO NOTE: This software is for Factory Integration Only (FIO). NOTE: Images of SmartStart and Firmware Maintenance CDs are available at HP.com support site http://www.hp.com/cgi-bin/hpsupport/index.pl. Images of the Management DVD are available at Software Depot - ProLiant Essentials Foundation Pack - Management CD/DVD. 356604-B21

534516-B21

SmartStart Website
For additional information please visit the SmartStart Web site at: http://www.Hp.com/go/foundation or http://www.hp.com/servers/SmartStart. For the latest information about SmartStart and other related software; please visit the SmartStart Web site at: http://www.hp.com/servers/SmartStart. The SmartStart Web site includes the following and more: What's New information Subscription information Support Information Server and OS Support Matrices Links to the latest ProLiant Software and Driver download pages

Benefits

Integral part of the HP server experience: SmartStart is part of the ProLiant Essentials Foundation Pack, delivered standard with HP ProLiant ML and DL 300, 500 and 700 servers. The ProLiant Essentials Foundation Pack provides convenient access to the suite of Intelligent Manageability products. The Foundation Pack provides essential management tools designed to simplify IT management in a dynamic and demanding 7x24x365 environment. Reliable configuration: By assisting with operating system installations, integrating server support software, and preventing configuration errors, SmartStart ensures consistency, and maximizes reliability and system uptime. SmartStart leverages embedded system utilities that provide either customized configuration or intelligent defaults for server hardware and array controller configuration. Optimized configuration: SmartStart integrates optimized ProLiant drivers with every assisted OS installation to achieve the maximum performance for your ProLiant server. Manageable-ready system: SmartStart completes your ProLiant server setup with installation of management agents, ready to be managed with HP Systems Insight Manager. HP Insight Management WBEM Providers: Supports Windows Server 2003/2008. These providers: Are based on industry standard technologies for accessing management information in an enterprise environment. Supply system management data through the Windows Management Instrumentation (WMI) framework for ProLiant server platforms and options Are now available as an alternative to SNMP management agents Are supported by HP-SIM 5.2 Extend the Common Information Model (CIM) defined by the DMTF to provider a rich set of standards based management data that is specific to ProLiant systems. Leverage the rich set of base-level instrumentation provided by the system management controllers and drivers. Deliver in-depth hardware management, inventory, system state, and event notifications.

Page 2

For more information go to: www.hp.com /go/HPwbem

Page 3

Standard Features

SmartStart

SmartStart is an essential single-server deployment tool that simplifies HP ProLiant server setup, providing a repeatable way to deploy reliable and consistent single-server configurations. SmartStart uses embedded ROM-based setup utilities (RBSU) to configure server and array controller hardware. SmartStart assists with the OS installation process by preparing the system for installing "off-the-shelf" versions of leading operating system software and automatically integrating optimized HP ProLiant server support software drivers, utilities and management agents, known as ProLiant Support Packs. SmartStart users enjoy the following benefits: An easy-to-use, intuitive graphical interface that guides you through preparing your system for the OS installation process. Integration of key server software drivers and management agents through ProLiant Support Packs with every assisted installation. Dependency and validity checks to ensure that all supported ProLiant software can be installed.

ProLiant Support Pack

The ProLiant Support Pack (PSP) is an integral component for optimizing and managing your HP ProLiant server. PSPs help you maintain the software versions on your HP ProLiant servers. PSPs are operating system specific bundles of ProLiant optimized drivers, utilities, and management agents for Windows Server 2003/2008 and Linux. These bundles of software are tested and released concurrently with HP SmartStart CD to insure proper installation and functionality. PSPs can be installed in a variety of ways: Using SmartStart assisted installation for Windows. Launching the installation from the Windows and Linux autoruns on the SmartStart CD Launching the installation from the Windows and Linux autoruns on the SmartStart CD Using the deployment utilities that are provided with the PSPs when downloaded from: http://www.hp.com/servers/psp or the SmartStart CD For details, view the HP ProLiant Support Pack and Deployment Utilities User Guide. New drivers for ProLiant Support Pack (PSP) 8.20 for Windows: HP NC-Series Intel N1Q Driver for Windows HP NC-Series NetXen nx3 Multifunction Driver for Windows QLogic iSCSI HBA STOR Miniport driver for Windows Removed drivers for ProLiant Support Pack (PSP) 8.20 for Windows: HP ProLiant Advanced System Management Controller Driver for Windows Server 2003 New drivers for ProLiant Support Pack (LSP) 8.20 for Linux: HP NC-Series Intel e1000e Driver for Linux Qlogic iSCSI Driver for Linux HP NC-Seriens Intel igb Driver for Linux

Server Setup

SmartStart uses ROM-based setup utilities (RBSU) to perform server and array hardware configuration. A complete list of ROM-based systems is available at: http://www.hp.com/servers/SmartStart. For legacy, non-RBSU server systems use SmartStart 5.50 to perform server deployment. SmartStart 5.50 is available for download at: http://www.hp.com/servers/smartstart. Assisted OS Installation To optimize the performance of your hardware platform, use the SmartStart assisted installation to help (For Windows) you prepare your system for the operating system installation process. Using an assisted installation, SmartStart enables you to install the operating system using the vendor-supplied CDs, and provides automated installation of server support software using ProLiant Support Packs (PSPs).

Page 4

Manual OS Installation
If you prefer not to utilize the assisted installation, you may either use ROM-based setup (in RBSUenabled systems), Option ROM Array Configuration (ORCA) or SmartStart to configure your server hardware before OS installation. After the operating system has landed, apply the latest PSP obtained from SmartStart by launching the Windows or Linux Autorun or by downloading it from: http://www.hp.com/support (See Software Updates below for more details.)

Software Updates

Autorun Features The Autorun feature of the SmartStart and ProLiant Firmware Maintenance CDs is available for Windows and Linux environments. Autorun provides access to support software and useful product information also contained on the CD.
To launch autorun on a Windows system, either insert the CD in a CD-ROM drive and autorun will automatically launch, or launch by executing _autorun\autorun_win.exe from the CD. To launch autorun on a Linux system, insert the CD in a CD-ROM drive, log on to the root and mount the CD and run the autorun file. Get Proactive Notification Proactive delivery of Product Change Notifications (PCNs), Customer Advisories (CAs), and software driver alerts are delivered through Subscriber's Choice. We encourage you to begin taking advantage of of Upcoming Software with Subscriber's Choice the feature-rich notifications delivered from HP Subscriber's Choice at: http://www.hp.com/go/subscriberschoice.

Systems Maintenance

Perform Server Maintenance by booting the SmartStart CD and launching these utilities Insight Diagnostics - performs tests on system components. Insight Diagnostics displays information about a server's hardware and software configuration. You can perform hardware and software tests on the following subsystems: Processor, Input devices, Communication ports and devices, Storage devices, Graphics, Memory, Multimedia devices and now the remote management processor (iLO, RILOE II). Array Configuration Utility (ACU) - enables you to configure newly added Smart Array controllers and associated storage devices. It is a web-based tool that has a configuration wizard that allows you to configure your Smart Array controller, add additional disk drives to an existing configuration or reconfigure your existing disk drive array. Array Diagnostics Utility (ADU) - performs device tests on HP array controller hardware Erase Utility - provides options to clean different areas of the system: attached drives, non-attached drives, BIOS, and non-volatile RAM (NVRAM)

Page 5

Perform Server Maintenance through ROM-based embedded utilities
The ROM-Based Setup Utility (RBSU) performs a wide variety of server configuration activities: viewing system information to prepare the system for installation of the OS, configuring system devices and installed options and selecting the primary boot controller. RBSU is accessible by pressing F9 key after the system has booted. The Option-ROM Configuration for Arrays utility (ORCA) allows users to configure HP array controllers. ORCA is accessible by pressing F8 key after the system has booted. It allows the user to create and delete logical drives, set interrupts, and set boot controller order. The enhanced auto-configuration process will automatically configure the system for RAID selection without the user having to launch RBSU and ORCA. The RAID defaults are based on the following number of drives: 1 drive - RAID 0, 2 drives - RAID 1, 3-6 drives - RAID 5. The user always has the option of configuring the server through RBSU and ORCA. Dynamic Setup Support enables the operating system to automatically find necessary boot drivers on the Virtual Install Disk, to complete the OS installation without user intervention. This feature is only supported for Windows Server 2003. Selected set of system Diagnostics and Inspect utilities is available by pressing F10 key after the system has booted. F10 launches the System Maintenance Utilities. HP offers a complete choice of services to ensure the success of your ProLiant server deployment program. For more information on any of these below, go to: http://www.hp.com/servers/smartstart. Warranty - HP will replace defective delivery media for a period of 90 days following the date of purchase of your server. Startup technical software support - Available at no additional charge by calling HP Support up to 90 days from the date of purchase of your server. Phone support is available to assist customers with installation and set-up and standard usage questions. Worldwide numbers for HP Support are available at: http://www.hp.com/hps/carepack/services/cp_sw_technical.html. SmartStart Support Forum - The HP Support Forum is a community based, user supported tool for HP customers to participate in discussions amongst the customer community about HP products. Software and Drivers download pages - Link for Software and Drivers download page should be: (http://www.hp.com/cgi-bin/hpsupport/index.pl)- Provides latest software and drivers for your ProLiant products

Service and Support

Page 6
Operating System and ProLiant Server Support

OS Support

The following released operating systems are supported by SmartStart for an assisted installation and by ProLiant Support Packs Microsoft Windows Server 2008 Microsoft Windows Server 2003 Microsoft Windows Server 2003 x64 edition Microsoft Windows Standard, Enterprise Microsoft Windows Server 2003 R2 Data Center Edition x86/64 on selected platforms (BL45p, BL45p G2; BL685c, DL380 G4/G5; DL580 G3/G4; DL585, DL585 G2; ML570 G3/G4) The following released operating systems are supported by ProLiant Support Packs Red Hat Enterprise Linux 5,4 SUSE LINUX Enterprise 9,10 For an up-to-date list of ProLiant supported operating systems please view the following URL: http://www.hp.com/wwsolutions/index.html

Server Support

For Server Deployment: Use SmartStart 7.x and later for assisted installation and server maintenance operations on HP ProLiant BL Server Blades and HP ProLiant ML and DL 300, 500 and 700 series RBSUbased systems. Use SmartStart 5.50 for configuring and installing operating systems on pre-RBSU systems. For Software Updates: Access the latest software and drivers from via: http://www.hp.com/support Download the latest version of HP Systems Insight Manager from Download the latest version of HP Systems Insight Manager from: http://www.hp.com/go/hpsim. For an up-to-date list of supported ProLiant servers please view the following URL: http://www.hp.com/servers/smartstart

Software Support

HP Care Pack offering combines comprehensive ProLiant Essentials and Insight Control software support with convenient access to ProLiant Essentials and Insight Control software updates Expert support for performance, availability, and productivity optimization ProLiant Essentials and Insight Control software technical support brings timely assistance and trustworthy advice on issues such as product features and use, problem diagnosis and resolution, and software defect identification. Service highlights include: Ready access to technical resources - Connect with experienced HP IT Response Center engineers via telephone, electronic communication, or fax for help with ProLiant Essentials and Insight Control implementation or operations problems. Problem analysis and resolution - HP Services provides corrective support to resolve identifiable and reproducible ProLiant Essentials and Insight Control product problems, and to help you identify problems that are difficult to reproduce. You can also receive help with trouble-shooting and setting configuration parameters. Software features and operational support - HP provides information on the latest ProLiant Essentials and Insight Control features and known problems and solutions, plus operational advice and assistance. Escalation management - Established escalation procedures enlist specialized expertise from HP and selected third-parties. Installation advisory - Advisory support is available for help with installing and updating standalone or networked ProLiant Essentials and Insight Control products.

Page 7

Choice of coverage windows - Service is available 13x5 Monday-Friday or 24x7. Productivity-enhancing software updates This multifaceted service also brings updated ProLiant Essentials and Insight Control software products, patches, and technical manuals as they become available. And it includes licensing to use and copy the new updates. Subscription-based purchasing gives you substantial savings vs. the cost of individual updates. Service highlights include: Software updates - Complete ProLiant Essentials and Insight Control product and documentation updates are made available to your system manager. Software licensing - You receive a license to use and copy updates for all systems covered by your original software license. Electronic software information - Access HP's electronic support facility for ProLiant Essentials and Insight Control software patches, a symptom-solution database, product descriptions, specifications, technical literature, and more This service gives the opportunity to obtain software updates faster and more efficiently with: http://www.hp.com/softwarereleases/releases-media2/SUM/How_to_be_a_SUM_customer.htm Software Update Manager provides online access to view support entitlements, manage release notification profile, and immediately download new updates Care Packs services for ProLiant Essentials Operating Environment provide support for the following products. NOTE: Supported products may change over time, the list of products: Rapid Deployment Pack Windows Edition Performance Management Pack Systems Insight Manager iLO Advanced Pack iLO Select Pack Vulnerability and Patch Management Pack Virtual Machine Management Pack HP Insight Control Linux Edition Insight Control Environment iLO Power Management Pack Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

Page 8

Copyright 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Page 9